32-Inch Monitor Arms
149 results
Free up desk space and maximize your ergonomic viewing with the Allsop Freestanding Dual Monitor Arms. A perfect solution for any desk, the freestanding base allows it to be placed virtually anywhere and unlike clamp-on arm systems it doesn’t require a desk edge for mounting. The full-motion articulating arms allow users to pan, tilt, rotate, and raise monitors to find the perfect ergonomic position. Easy VESA mounting for two monitors up to 32”..Articulating arms allows user to pan, tilt, rotate, and raise monitors to find the perfect ergonomic position..Detachable VESA mount provides easy monitor installation and accommodates monitors 17” - 32” in size..Micro-adjust screw allows user to fine-tune monitor placement for nearly seamless side-by-side viewing.Sturdy freestanding base keeps monitors in place while also providing a convenient smartphone slot.Free Standing Dual Monitor Arms
MI-2761 premium monitor desk mount merges functionality with aesthetics. By elevating your monitor above your desk, increase desktop space and get ergonomic positioning of your screens for reduced strain and better sitting posture. Fluid and easy movements and adjustments. The spring arm tension can be adjusted to suit the weight of the monitors, allowing fingertip height adjustment. Single monitor arm adjusts effortlessly for easy use. Full motion arms extend and retract, tilt, swivel and adjust in height. You can also rotate the monitor to switch between landscape and portrait modes..Screen Sizes: 17" - 32".Fully adjustable counterbalance arm with mechanical spring.Weight capacity: 17.6 lbs..Spring Arm Height adjustable up to 11.5 inches.Tilt: 90 degrees up / 90 degrees down.Swivel: 360 degrees at two joints and 180 degrees at one joint.Rotate: 360 degree (between landscape and portrait modes).Integrated cable management system.Desktop thickness: 0.39-3.3 inches.Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors with VESA 75 and VESA 100 mounting patterns.Supported by manufacturer's limited lifetime warranty
Mount-It! MI-2781 helps raise your monitors to an ergonomic position and work more efficiently with this dual monitor stand. Designed for performance, this monitor stand is made from high-strength steel for durability. Freestanding base sits on top of any desktop for quick installation. The arms can be raised or lowered on the pole for easy height adjustment. Tilt and swivel offer multiple monitor angles for comfortable reading, and integrated cable management keeps your cords off your desktop.All necessary instructions and hardware included.Screen Sizes: 13" - 32"VESA Compatible: 75x75, 100x100Monitor Weight Capacity: 17.6 lbs. (per screen)Tilt: +45°~-45°Swivel: +90°~-90°Screen Rotation: +180°~-180°Pole Height: 18.3"Material: Steel.ERGONOMIC DUAL MONITOR MOUNT: Raise your monitors/screens to the optimal viewing height to reduce neck stain and back stiffness. Cable management clips keep your desk neat organized..STURDY SUPPORT and HIGH QUALITY CONSTRUCTION: Heavy-duty steel monitor mount can support to 32" monitors for versatile use with a weight capacity of 17.6 lbs. per arm for a total capacity of 35 lbs..FULLY ADJUSTABLE: Monitor arms have arms which tilt +/- 45 degrees, swivel left-right 360 degrees, and can be raised and lowered on the 18.3" center pole, offering a more ergonomic positioning of your computer screens, while saving room on your desktop. Each screen can be placed in portrait or landscape orientation independent of one another..WIDELY COMPATIBLE: Works with screens from 17" to 32" in size and works with the standard 75x75mm or 100x100m VESA square bolt hole patterns.EASY INSTALLATION: 2-monitor stand comes with all mounting hardware, tools, and instructions necessary for assembly. Mounting plates can be removed, attached to monitors and reattached to the stand in just a few minutes. Stable freestanding base supports use on desktop..Supported by manufacturer's lifetime limited warranty.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Mount two 13" to 32" LCD displays on your desk with this Mount-It! dual monitor desk stand LCD mount to improve productivity.
Ideal for freeing up space on desks, the Allsop Art metal dual-arm monitor stand allows users to position their dual monitor setups for optimal viewing and ergonomic comfort. This dual-arm monitor stand features a sleek minimalist design while offering superior stability and adjustability. Each monitor arm has multiple joints allowing full forward, backward, and side-to-side adjustment. The VESA mount joint features tilt and swivel adjustment capabilities to ensure users will find their perfect viewing angle..Raise your monitor to a comfortable viewing height with this monitor arm.Each arm holds a monitor up to 32" for versatile use.Made of metal.-40 to 40-degree tilt, 180-degree pan, and 360-degree rotation adjustment options enable optimal viewing.Each arm holds a 32" monitor weighing up to 14.5 lbs..VESA 100 x 100 and 75 x 75 compliant.Comes in black.Quick and easy clamp mounting system fits a variety of desks (up to 2" thick); arms can be assembled and installed in just minutes.Features 6" of independent height adjustment for monitors
This 6-panel monitor stand allows the connection of flat panel monitors through standard VESA mounting brackets. Our revolutionary hinge modules are designed to enable display monitors to be rotated, swiveled and tilted. The engineering of the AMR6S32 is designed to meet high ergonomic expectation and to be rugged without compromising the aesthetics of the design. The AMR6S32 is constructed with aluminum alloy to ensure sturdiness and allow for the mounting of individual monitors that weight 8Kg (17.6 Lbs.). The device is suitable for 26"-32" monitors. Some 32" monitors require an offset placement to fit on the mount..Features: Swivel, Rotate, Tilt, Ergonomic, Rugged.Maximum Load Capacity: 105.82 lb..Maximum Screen Size Supported: 32".Made of aluminum.-10 to 15-degree tilt, -10 to 15-degree pan, and -10 to 15-degree rotation adjustment options enable optimal viewing.Weighs 25.04lbs..Dimensions: 38"H x 66.8"W x 5.3"D.Compatible with: VESA 75 x 75, 100 x 100, 200 x 200 mounting patterns.3-year manufacturer limited warranty
You no longer need a wall or desk to mount a monitor. With Amer pole mount monitor arm, all you need is a pole! These monitor arms integrate a clamp and adjustable monitor arm that mount quickly and easily to a 1.1"-2.4"Dia. (28mm to 60mm) diameter pole. They're the perfect mounting solution when conventional mounting isn't available..Create your perfect workspace with this full-motion pivot pole mount monitor arm.Supports a monitor up to 32" and 17.6 lbs. for versatile use.Made of steel and plastic in matte black.360-degree rotation around the pole provides optimal viewing.Dimensions: 5.6"H x 4.5"W x 13.8"D.Compatible with: VESA 75 x 75mm and 100 x 100mm mounting patterns.Free-tilting design makes easy forward or backward adjustment for better viewing and reduced glare.Pole clamp attaches to circular tube firmly.Swiveling arm offers maximum viewing flexibility.Cable management keeps everything organized
Enhance your workstation with the MI-2762 dual monitor mount. Effortlessly tilt, swivel, and rotate your screens while maintaining a clutter-free desk with built-in USB 3.0 ports and easy installation..Fits monitors from 19" to 32".2 x USB 3.0 ports for easy connection of your devices.11.5 Inches of Height Adjustment.VESA 75x75 and 100x100 compatible..Weight capacity: 4.4 to 17.6 lbs. for each arm.Tilt: 90 degrees up / 90 degrees down.Swivel: 360 degrees at two joints and 180 degrees at one joint.Rotate: 360 degree (between landscape and portrait modes).C-Clamp and Grommet base options included.Easy to install. All hardware for installation and instructions provided.Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors with VESA 75 and VESA 100 mounting patterns.Supported by manufacturer's limited lifetime warranty.Ergonomic Dual Monitor Mount with Height Adjustment & USB 3.0 Ports. Ideal for offices, reception areas, hospitals, retail environments and modern homes.
The j5create JTSA101 is a gas spring monitor mount. The single arm can hold a screen up to 32" weighing up to 17.6 lbs. Easily adjust your screen to any height. The gas spring allows the screen to swivel 180 degrees, tilt from -45 to 90 degrees, and rotate 360 degrees. Conveniently set your monitor at an optimal angle. This monitor mount gives you the ability to create a more efficient workspace, whether you need extra space or a standing desk setup..Raise your monitor to a comfortable viewing height with this single-arm monitor mount.Supports a monitor up to 32" and 17.6 lbs. for versatile use.Comes in black and made of aluminum, steel, and plastic.-45 to 90-degree tilt, -90 to 90-degree pan, and 360-degree rotation adjustment options enable optimal viewing.Weight: 4.3 lbs..Dimensions: 12.6"H x 3.54"W x 18.3"D.Compatible with VESA 100 x 100 and 75 x 75 mounting patterns.Simple to install, the mount includes clear instructions and all necessary tools.Rubber feet protect desk surface.2-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The j5create JTSA102 is a dual-arm gas spring monitor mount. Each of the arms can hold a screen up to 32" weighing up to 17.6 lbs. Easily adjust your screens to any height. The gas springs allow the screens to swivel 180 degrees, tilt from -45 to 90 degrees, and rotate 360 degrees. Conveniently set your monitors at an optimal angle. This monitor mount gives you the ability to create a more efficient workspace, whether you need extra space or a standing desk setup..Raise your monitor to a comfortable viewing height with this double-arm monitor mount.Each of the arms supports a monitor up to 32" and 17.6 lbs. for versatile use.Comes in black and made of aluminum, steel, and plastic.-45 to 90-degree tilt, -90 to 90-degree pan, and 360-degree rotation adjustment options enable optimal viewing.Weight: 7.05 lbs..Dimensions: 12.6"H x 5.51"W x 18.3"D.Compatible with VESA 100 x 100 and 75 x 75 mounting patterns.Simple to install, the mount includes clear instructions and all necessary tools.Rubber feet protect desk surface.2-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Elevate your monitor to maximize desk space and reduce eye, neck, and shoulder strain. This Fellowes monitor stand is fully height- and depth-adjustable for optimum viewing control and a cost-effective ergonomic solution. This monitor arm features a single design with built-in cable management to keep you tangle-free. Easy install using the quick fit VESA plate with either a desk clamp (0.38”-3.5” thick) and grommet (0.44”-2.75” diameter) mount included for secure and easy attachment options. The Reflex experience seamlessly adjusts with 360° rotation, 180° swivel, and +/- 45° tilt for optimal viewing angles..MAXIMIZE PRODUCTIVITY: Free up valuable work space for maximum productivity and collaborate with colleagues effortlessly with the Reflex monitor arm.SUPPORTS: Single monitor up to 32" and 17.6 lbs., optimizing desk space with ergonomic design ideal for home or office.ADJUSTABLE HEIGHT & DEPTH: This fully independent monitor mount by Fellowes is adjustable by height and depth to achieve optimum viewing control and a cost effective ergonomic solution which helps reduce your risk of eye, neck and back strain.EASY INSTALLATION: Effortless installation. Quick-fit VESA plate simplifies monitor installation, ensuring hassle-free setup on desks or tables using clamp or grommet options.GET RID OF YOUR CLUTTER: Reduce clutter in your workspace with the Reflex monitor arm which features an intuitive cable management system which helps keep your cables organized.SPACE-SAVING: Compact and efficient space-saving design to free up valuable workspace.WARRANTY: Extended 5 Year Limited Warranty
The MI-2752L allows you to raise your monitors at an ergonomic position and free up valuable desk space with this dual monitor mount. Designed for performance, this desk mount is made from high grade steel built to stand the test of time and supports screens up to 22 lbs. each arm and screen size up to 32". Adjustable height, tilt, swivel and rotation functionalities offer optimal viewing angles. Comes with cable management clips to keep your wires organized..Fits two displays from sizes 17 to 32 inches in size, with a maximum support weight of 22 pounds on each arm, using the 75x75mm or 100x100mm VESA square bolt holes pattern found on the back of the monitor. (measure distance, in millimeters, between bolt hole patterns if unsure of size).Constructed of heavy duty steel, integrated cable management clips keep your cables organized, comes with interchangeable C-clamp or grommet bases, and mounting plates are detachable for easy monitor mounting..Comes with all mounting hardware, tools, and instructions necessary for assembly. Mounting plates can be removed, attached to your monitors, then re-attached to the stand in a few minutes for easy installation..Monitors can tilt up 90 degrees and down 90 degrees, swivel left and right 180 degrees at two different joints, and each screen can be rotated 360 degrees and held in portrait or landscape orientation independent of one another. Arm raises and lowers a total of 17 inches on the center pole..Supported by manufacturer's limited lifetime warranty.The MI-2752L full motion monitor arm mount helps you increase productivity and clear up extra space on your desk
Upgrade your workspace with the Ergotron LX Pro Adjustable Desk Monitor Arm. Designed for professionals who value comfort and flexibility, this sleek black arm supports monitors up to 34" and up to 22 lbs. With Constant Force™ technology, it delivers smooth, effortless adjustments—lift, tilt, pan, and rotate your screen to find the perfect viewing angle. The compact base and integrated cable management help keep your desk organized and clutter-free. Built from durable aluminum and backed by a 10-year warranty, the LX Pro combines ergonomic performance with modern aesthetics to enhance productivity and reduce strain throughout your workday..Designed for single monitors with a compact desk arm configuration.Supports screens up to 34" for versatile professional setups.Adjusts vertically up to 13" for personalized ergonomic comfort.Built with durable aluminum and finished in sleek black.Enables 360° rotation, 85° tilt, and full swivel articulation.Clears desk space with a small base and integrated cable routing.Weighs only 8.4 lbs. for lightweight yet stable installation.Compatible with VESA 100 x 100 mm and 75 x 75 mm standards.Measures approx. 17" H × 10" W × 5" D for space-saving use.Complies with ANSI/BIFMA standards for quality and safety.Ergotron 10-year limited warranty.
Mount-It! MI-2752 is a dual monitor mount that raises your monitors to an ergonomic position to help you work more efficiently. Designed for performance, this mount is made from high-strength steel for durability and includes both clamp and grommet installation components to fit a variety of desktops. The arms can be raised and lowered on the pole for easy height adjustment. Tilt your screen at 90 degrees up and down or swivel it at 180 degrees up and down to find your most comfortable reading, and integrated cable management keeps your cords off your desktop. All necessary instructions and hardware included..ERGONOMIC DUAL MONITOR MOUNT: Raise your monitors/screens to the optimal viewing height to reduce neck stain and back stiffness. Cable management clips keep your desk neat organized..FULLY ADJUSTABLE: Mount arms can tilt up and down 90 degrees, swivel left and right 180 degrees, raise and lower 17" inches (the height of pole), and each screen can be rotated and placed in portrait or landscape orientation independent of one another.WIDELY COMPATIBLE: Works with screens from 17" to 32" in size and works with the standard 75x75mm or 100x100m VESA square bolt hole patterns.EASY INSTALLATION: 2-monitor stand comes with all mounting hardware, tools, and instructions necessary for assembly. The detachable VESA plates make mounting a breeze and can be adjusted up to 1” to perfectly align the height of monitors. Includes interchangeable C-clamp mount (works with desks up to 4" in width) and grommet base mount (works with desks up to 3.25" in width).Supported by manufacturer's lifetime limited warranty.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..The MI-2752 dual monitor arm mount helps you increase productivity and clear up extra space on your desk
You no longer need for a wall or desk to mount a monitor. With Amer pole mount monitor arm, all you need is a pole! This monitor arm integrate a clamp and adjustable monitor arm that mount quickly and easily to a 1.1"-2.4"Dia. (28mm to 60mm) diameter pole. They're the perfect mounting solution when conventional mounting isn't available..Create your perfect workspace with this pivot pole mount monitor arm.Supports a monitor up to 32" and 17.6 lbs. for versatile use.Made of steel and plastic in matte black.360-degree rotation around the pole provides optimal viewing.Dimensions: 4.5"H x 4.5"W x 5.5"D.Compatible with: VESA 75 x 75mm and 100 x 100mm mounting patterns.Free-tilting design makes easy forward or backward adjustment for better viewing and reduced glare.Pole clamp attaches to circular tube firmly
Elevate your workspace with the Fellowes Professional Series Adjustable Freestanding Single Monitor Arm, designed to support monitors up to 32 inches and 17.6 lbs. Its freestanding design offers maximum flexibility, making it ideal for environments where clamp or grommet mounting isn’t an option. The low-profile, weighted base ensures stability, while the intuitive cable management system keeps your desk neat and organized. Easily adjust your monitor to reduce eye, neck, and shoulder strain, and create a more ergonomic and productive workstation..Freestanding design allows for increased flexibility and can be used in spaces that do not allow a clamp or grommet mount.Create a productive workspace and position your monitor to reduce eye, neck and shoulder strain.Low profile, weighted base provides enhanced stability.Minimize clutter with the intuitive cord management system.Holds 32” monitors up to 17.6 lbs..Meets VESA mounting standards.Dimensions: 18.31"H x 11.03" W x 28.56" H.3 Year Limited Warranty
Durable steel and aluminum construction! Tested to perform 10 times the expected life-cycle of other competitive brands at roughly half the price..Monitor Mount & Stand Type and Use: Mounting Arm for Monitor.Monitor Size Supported & Number of Arms (If more than 1): 32" Screen Display, 1.Adjustable Minimum and Maximum Height (Inches): 13".True Color & Material of Item: White.Articulation; Pivot Angle (Degrees), Tilt Angle (Degrees), Rotation Angle (Degrees), Swivel Angle (Degrees) & Viewing Angle (Degrees): Tilt Angle 75, Rotation Angle 360, Pan Angle 360.Storage options: Not Available.Weight (lbs.): 7.4 lbs..Mount Bracket or VESA Pattern: MIS-D
This single arm monitor wall mount helps clear out your desktop space and raise your monitor for a more ergonomic installation. Raising monitors to eye level helps prevent common issues such as neck, back pain, and eye strain. We utilized the best gas spring components available in the market to make the height adjustment fluid and easy. The tension on the gas spring can be increased or decreased to the adjust the amount of counterbalance for the weight of your monitors - allowing fingertip height adjustment. The full motion design allows tilt up and down, swivel left and right, as well as the ability to push the monitor towards the wall or extend them away from the wall. You can position the monitor exactly as you wish. The slide-in VESA plate allows you to install the wall mount to the wall, connect the plates to your monitor and slide the monitor into the wall mount with easy..Single Monitor Wall Mount fits most of 13"-32" Screens.Tilt, Swivel, Full Motion and Height Adjustable Features.Each monitor can tilt up 90 degrees or down 45 degrees and rotates 180 degrees.Distance From the Wall: 3.5"es min, 17.7"es max.Load capacity 14.3 lbs..Supported by manufacturer's limited lifetime warranty
The SIIG Adjustable Monitor Arm (CE-MT2K12-S1) is a versatile and space-saving solution designed to support monitors up to 32 inches, making it ideal for both home and office environments. Finished in sleek black, this monitor arm offers full motion adjustability—including tilt, swivel, and rotation—so you can easily position your screen for optimal viewing comfort and reduced eye and neck strain. Its durable construction ensures reliable performance, while the integrated cable management system keeps your workspace neat and clutter-free. Compatible with VESA mounting patterns, this monitor arm combines ergonomic functionality with a modern, professional look..Supports up to 17" monitors for versatile use.Made of aluminum.-35 to 35-degree tilt, -35 to 35-degree pan, and -35 to 35-degree rotation adjustment options enable optimal viewing.Weighs 3.3lbs..Dimensions: 11.2"H x 4.5"W x 14.3"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.3-year manufacturer limited warranty.3-year manufacturer limited warranty
This incredibly versatile product supports up to two 32" monitors each with a maximum individual weight of 26.5 lbs. Not only will this strong and sturdy mount have no trouble holding VESA certified 75x75 or 100x100 monitors, (fitting the above criteria), it is also extremely adjustable! Monitors stack on top of each other providing more desk space and ergonomic viewing Both monitors have 360 degrees rotation. Also included is a +/- 20 degrees tilt in any direction Individual adjustments for BOTH Monitors, ensuring maximum user comfort Height adjustable, with a maximum height of 35" from the desk to the center of the mounting device for the top monitor Studies show that dual monitors can increase productivity by up to 50%..Compatibility: 2 x LCD Monitor.Country of Origin: Taiwan.Device Supported: Flat Panel Display.Screwed onto the edge of a desk for maximum space.Clamp bases require a lip on the desk 8-50 mm thick and 85 mm deep.Sturdiest of all Mount types (Stand, Grommet, Clamp) and requires least amount of deskspace.Weighs 10.65lbs..Dimensions: 38"H x 8.9"W x 5"D.Compatible with: VESA 75 x 75, 100 x 100, 200 x 200 mounting patterns.Comes in black.3-year manufacturer limited warranty
The AMR2S32V is a stand-style monitor with an adjustable height that supports up to 2 LCD monitors. The vertical and stand construction of this mount allows for more work space and a great number of advantages for those wanting to create a more ergonomic and functional environment. SEE MORE and DO MORE™ with features like: Arm Angle-Adjust, Smart Torque Adjust, Aluminum Alloy Structure, Easy Installation, 90 degrees rotation and Height Adjust. In addition to these features, the device is also compatible with VESA 200a-100/100a-100/75X75 and suitable for monitor sizes 24" to 32"..Features: Ergonomic, Adjustable Height, Rotate, Tilt, Swivel.Maximum Load Capacity: 52.91 lb..Maximum Screen Size Supported: 32"
The Amer Mounts™ AMR2S32U 24" - 32" dual monitor stand in black, withstands a maximum load capacity of 17.6 lbs. It features steel/aluminum alloy/plastic construction. It supports maximum of +/- 15 deg tilting, maximum of +/- 15 deg swiveling and 360 deg rotating. It is 75 mm x 75mm, 100 mm x 100 mm and 200 mm x 100 mm VESA mountable. This monitor stand allows 90 deg monitor rotation, height adjustment, cable management and arm angle adjustment. The easy to install monitor stand has Intellitorque™ hinge system and aluminum alloy structure..Dual monitor stand helps to create a more ergonomic and functional workspace.Maximum size: 24" - 32", load capacity: 17.6 lbs..Material: Steel/aluminum alloy/plastic.Dimensions: 19.84" x 42.01" x 12.87".Tilt: Max +/- 15 deg, Swivel: Max +/- 15 deg.Rotate: 360 deg.VESA mount: 75 mm x 75mm, 100 mm x 100 mm, 200 mm x 100 mm.Color: Black.Number of monitors: 2.Screw type: M4, M5, M6, M8.90 deg Monitor rotation, height adjustment, cable management, arm angle adjustment.Intellitorque™ hinge system, aluminum alloy structure, easy installation.Weight: 7.44 lbs..Comes with 3 years warranty
Raise your monitor to an ergonomic position and free up desk space with this single monitor mount. Designed for performance, this mount is made from aluminum and steel for sturdy use. This mount includes both clamp and grommet installation components to fit a variety of desktops. Gas spring allows for smooth and easy height adjustment. Tilt and swivel functionality offer multiple monitor angles for comfortable reading, and integrated cable management keeps your cords off your desktop..Screen Size: 17" - 32".Monitor Weight Capacity: 17.6 lbs..Arm Extension: 19.5" - 21.5".Screen Rotation: +180°,-180°.VESA Compatible: 75x75, 100x100.Tilt: +35°,-35°.Swivel: +90°,-90°.Material: Aluminum, Plastic, Steel.Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors with VESA 75 and VESA 100 mounting patterns.Supported by manufacturer's limited lifetime warranty
The AMR1S32 is a stand monitor stand with an adjustable height that supports 1 LCD monitor. The classic stand base is a tried and tested mounting method for those wanting to create a more ergonomic and functional environment. SEE MORE and DO MORE™ with features like: 90 Degree Monitor Rotation,. Height Adjustment,. Cable Management,. Arm Angle Adjustment, PowerTorque™ Hinge System,. Aluminum Alloy Structure,. Easy Installation and VESA Mounting. Our LCD/LED monitor stand is an advanced display system providing increased efficiency and productivity. This is through the use of our PowerTorque™ Hinge System, which allows for display rotation, swivel and tilt functions. In addition to these features, the device is also compatible with VESA 100a-100/75X75 and suitable for monitor sizes 24" to 32"..Features: Ergonomic, Adjustable Height, Tilt, Swivel, Sturdy, 360° Rotation, Cable Management, Adjustable Arm, Hinge Locking, Hinge System.Maximum Load Capacity: 33.10 lb..Maximum Screen Size Supported: 32"
Transform your workspace with the Ergotron LX Adjustable Desk Monitor Arm, designed to deliver ergonomic comfort and modern style. Supporting monitors up to 34", this sleek arm features smooth 13" lift adjustment and full motion flexibility with 360° rotation, swivel, and pan. Its polished aluminum construction ensures durability while enhancing your desk’s aesthetics. The arm folds neatly under shelves or cabinets, saving space when not in use. With Constant Force™ Technology, you can reposition your screen effortlessly to reduce strain and boost productivity. Ideal for dynamic work environments, this monitor arm is built to last and backed by a 10-year warranty..Mounts to desks for ergonomic monitor positioning and space-saving use..Supports one monitor up to 34" with a single-arm configuration..Adjusts vertically from approx. 5" to 20" for personalized screen height..Built from polished aluminum for durability and a sleek, modern look..Moves with 360° rotation, 75° tilt, 360° swivel, and 360° pivot flexibility..Designed without drawers, bays, or shelves for a clean workspace..Weighs 7.9 lbs. with base and hardware for stable desk mounting..Compatible with 75x75 mm and 100x100 mm VESA mounting patterns..Measures approx. 20.6"H x 10.6"W x 4"D when fully extended and folded..Certified Clean Air GOLD.Ergotron 10-year limited warranty.
Desk Mount Dual Monitor Arm - Desk Clamp VESA Compatible Monitor Mount for up to 32 inch Displays - Ergonomic Articulating Monitor Arm - Height Adjustable/Tilt/Swivel/Rotating (ARMDUAL3).32 INCH LARGE MONITOR SUPPORT: VESA 75x75mm / 100x100mm compatible multi monitor mount supports 2 large monitors up to 32" (17.6 lb. / 8 kg) per arm w/ horizontal articulation & basic height adjustment.ADJUSTABLE SET UP: Use the desk-clamp (C-clamp) to easily mount and tighten by hand to a desktop (40-85 mm thickness) & cable management clips to hold incl. tools for quick height & angle adjustment.EASY DISPLAY ROTATION: This desk mount dual monitor arm has articulating arms that support toolless monitor rotation from landscape to portrait positioning for viewing longer pages without scrolling.SLEEK DESIGN: Streamlined look w/ small footprint enhances the work area and built-in adjustable cable management clips along the arms and center pole keep cables organized for a presentable workspace.WIDE RANGE OF MOTION: Double monitor mount increases ergonomic comfort and productivity with +30/-30° tilt, +90/-90° swivel, 360° rotating display, and height adjustment along the 15.7" (39.8 cm) pole.Dimensions: 19.6"H x 34.1"W x 4.9"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.5-year manufacturer limited warranty.Monitor Mount | Desk C-Clamp | Dual Swivel Arms | Adjustable | For up to 32” Monitors
MI-1771 is one of our premium desk mounts that merges functionality with aestatics. Increase viewing comfort-help reduce eye, back and neck strain. Swift and easy movements and adjustments. The spring arm tension can be adjusted to suit the weight of the monitors, allowing fingertip height adjustment. Single monitor arm adjusts effortlessly for easy use. Full motion arms extend and retract, tilt, swivel and adjust in height. You can also rotate the monitor to switch between landscape and portrait modes. By elevating your monitor above your desk, increase desktop space and get ergonomic positioning of your screens fore reduced strain and better sitting posture. The monitor arm is compatible with VESA patterns (100x100 mm and 75 x 75 mm). If your monitor has mounting holes in the back, this mount will work with it..Single Monitor Desk Mount Stand fits most of 13" -32" Displays.Tilt, Swivel, Full Motion and Rotating Features.Dual base allows c-clamp or grommet connection.Height Adjustable to 13".40 LBs Capacity.Supported by manufacturer's limited lifetime warranty.MI-1771B is one of our premium desk mounts that merges functionality with aestatics
Upgrade your workspace with the Ergotron LX Pro Adjustable Desk Monitor Arm. Designed for professionals who value comfort and flexibility, this sleek white arm supports monitors up to 34" and up to 22 lbs. With Constant Force™ technology, it delivers smooth, effortless adjustments—lift, tilt, pan, and rotate your screen to find the perfect viewing angle. The compact base and integrated cable management help keep your desk organized and clutter-free. Built from durable aluminum and backed by a 10-year warranty, the LX Pro combines ergonomic performance with modern aesthetics to enhance productivity and reduce strain throughout your workday..Designed for single monitors with a compact desk arm configuration.Supports screens up to 34" for versatile professional setups.Adjusts vertically up to 13" for personalized ergonomic comfort.Built with durable aluminum and finished in sleek white.Enables 360° rotation, 85° tilt, and full swivel articulation.Clears desk space with a small base and integrated cable routing.Weighs only 8.4 lbs. for lightweight yet stable installation.Compatible with VESA 100 x 100 mm and 75 x 75 mm standards.Measures approx. 17" H × 10" W × 5" D for space-saving use.Complies with ANSI/BIFMA standards for quality and safety.Ergotron 10-year limited warranty.
This is a dual 18” arm combination attached to a 15.7” post. The two arms can be installed in a dual row side-by-side or back-to-back configuration. Display height, optimal viewing angle and orientation can be set to individual requirements. Built from lightweight and yet durable aluminum, the mount can be easily recycled at the end of its life. Ideal for displays up to 32” in a landscape or portrait orientation. Perfect for screen real estate-demanding applications and multi-user environments in applications where display height does not require frequent adjustment..Dual arm monitor mount that can be installed in a dual row side-by-side or back-to-back.Ideal for displays up to 32".The AWMS-2-4640 is a dual 18" arm combination attached to a 15.7" post.Built from lightweight and yet durable aluminum. Color: Silver.No spring assisted height adjustability. Tilt +45/-25 degrees, 360 degree rotation around poll. Pan adjustment, portrait to landscape screen rotation, and height adjustable..14.92 lbs..Package dimensions: 16.00" x 12.50" x 8.50".VESA 75x75 to 100x100
This incredibly versatile product supports up to two 32" monitors each with a maximum individual weight of 33.1 lbs.! Not only will this strong and sturdy mount have no trouble holding VESA certified 75x75 or 100x100 monitors, (fitting the above criteria), it is also extremely adjustable! Each monitor can be placed at a different height to accommodate different sized monitors. Both monitors have 360 degrees rotation (meaning landscape, portrait, or anything in-between). Also included is a +/- 20 degrees tilt in any direction Individually for BOTH Monitors, ensuring maximum user comfort. Height adjustable, with a maximum height of 13" from the desk to the center of the mounting device. Studies show that dual monitors can increase productivity by up to 50%..Compatibility: 2 x LCD/LED Monitor.Country of Origin: Taiwan.Device Supported: Flat Panel Display.Classic Desk Stand.Maneuverable and reliable, stand mounts are the most popular mounting choice for monitors..No need for a desk lip to mount onto like clamp based mounts
Amer Mounts' arm is a monitor table stand designed with the convenient stretch function meet the current needs of display mounting and storage. The material of this arm, made out of rugged aluminum alloy, can support a 26.46-41.89 lbs. flat monitor and 16.53-31.97 lbs. curved/ultrawide monitor (curvature: ≥1000R). With multi-angle adjustment, left and right angle can be adjusted by 180 degrees, tilting angle +/-20 degrees and up and down adjustable function of the arm. The VESA quick release function allows for quick removal and connection of displays..This is a monitor table stand designed with the convenient stretch function meet the current needs of display mounting and storage.Supports displays up to 49" of curved and standard panels.Features 17.17" height adjustment range.Comes in black and made of steel, aluminum alloy, plastic.With multi-angle adjustment, left and right angle can be adjusted by 180 degrees, tilting angle +20/-20 degrees and up and down adjustable function of the arm.Weight: 14.33 lbs..Dimensions: 25.95"H x 19.88"W x 23.62"D.Compatible with VESA 75 x 75, 100 x 100.Arm can support a 26.46-41.89 lbs. flat monitor and 16.53-31.97 lbs. curved/ultrawide monitor (curvature: ≥1000R).The VESA quick release function allows for quick removal and connection of displays.Cable management and M4 screws are includes.3-year manufacturer limited warranty
MI-1771 is one of our premium desk mounts that merges functionality with aestatics. Increase viewing comfort-help reduce eye, back and neck strain. Swift and easy movements and adjustments. The spring arm tension can be adjusted to suit the weight of the monitors, allowing fingertip height adjustment. Single monitor arm adjusts effortlessly for easy use. Full motion arms extend and retract, tilt, swivel and adjust in height. You can also rotate the monitor to switch between landscape and portrait modes. By elevating your monitor above your desk, increase desktop space and get ergonomic positioning of your screens fore reduced strain and better sitting posture. The monitor arm is compatible with VESA patterns (100x100 mm and 75 x 75 mm). If your monitor has mounting holes in the back, this mount will work with it..Single Monitor Desk Mount Stand fits most of 13" -32" Displays.Tilt, Swivel, Full Motion and Rotating Features.Dual base allows c-clamp or grommet connection.Height Adjustable to 13".40 lbs. Capacity.10-year manufacturer limited warranty
Optimize a dual-screen setup with this adjustable monitor arm. Once attached, monitors can be independently adjusted by rotating, extending, tilting, or lifting them, and screens can be rotated a full 360 degrees and elevated more than 16 inches above a desk. This Fellowes dual arm supports a total weight of 48 pounds, enough to hold two modestly sized monitors at once..Two fully adjustable monitor arms for optimum viewing control.Easy to mount - clamp attaches to desktops 1-3” thick or through grommet holes at least 3-1/4” in diameter.Elevates monitors from 3-1/2” to 16-1/2” above the desk with a reach of 2-1/2”-27”.Tilts up or down +/-37° and freely swings left or right (360° rotation capability).Each arm holds a flat panel monitor up to 24 lbs..Meets VESA mounting standards.Dimensions: 22"H x 4.38"W x 38.75"D.3-year manufacturer limited warranty.Adjust the view of your monitors using this Fellowes Professional Series adjustable depth dual arm.
Raise your monitors to an ergonomic position and free up desk space with this stackable dual monitor mount. Designed for performance, this mount is made from aluminum and steel for sturdy use. This mount includes both clamp and grommet installation components to fit a variety of desktops. Gas spring allows for smooth and easy height adjustment. Tilt and swivel functionality offer multiple monitor angles for comfortable reading, and integrated cable management keeps your cords off your desktop. Screen Sizes: 17" - 32", VESA Compatible: 75x75, 100x100, Monitor Weight Capacity: 17.6 lbs. (per screen),Tilt: +35°~-35°, Swivel: +90°~-90°, Screen Rotation: +180°~-180°, Arm Extension: 19.5" - 21", and Material: Aluminum, Plastic, Steel..DUAL MONITOR ARM MOUNT DESK STAND: Fits two monitors up to 32" in size, with a maximum support weight of 17.6 pounds each, using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the monitors. Comes with interchangeable C-clamp (for desktops up to 3" inches thick) or grommet (up to 1.5" thick) base mounts..WELL-DESIGNED: Vertical monitor mount has counterbalanced, gas spring arms for effortless adjustments, and screens can be stacked in a vertical or horizontal configuration. Comes with integrated cable management and is made out of heavy duty steel and aluminum alloy..FULLY ADJUSTABLE: Vertical dual monitor stand can tilt up and down 35 degrees in either direction, swivel left and right 360 degrees, and raise or lower a total of 14.2 inches. Monitors can be rotated 180 degrees for portrait or landscape orientation independent of each other..EASY INSTALLATION: Double monitor mount comes with all mounting hardware, tools, and instructions necessary for assembly. Turn hex bolt on top of gas springs to set the counterbalance and hold screens in place..Supported by manufacturer's limited lifetime warranty.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Boost Ergonomics & Desk Space with Our Dual Monitor Mount. Perfect for Home Offices, Professional Set ups, Commercial Set ups to name a few.
Upgrade your workspace with the Ergotron HX Wall Dual Monitor Arm, designed for dynamic professionals who demand flexibility and style. Supporting two monitors up to 32", this polished aluminum arm delivers smooth, effortless adjustments with Constant Force™ Technology. Enjoy personalized viewing with independent pivots that tilt, pan, and rotate each screen, while the hinged bow makes screen sharing seamless. Built to last and tested for over 10,000 cycles, it’s a durable solution that saves space and enhances productivity. With sleek cable management and BIFMA level® 2 certification, it’s the smart, sustainable choice for modern work environments..Built for wall mounting, ideal for dual monitor setups in compact workspaces.Supports two monitors up to 32" each for enhanced productivity and viewing comfort.Adjusts vertically from 0" to 11.5" to suit sitting or standing positions.Finished in polished aluminum for a sleek, professional look and lasting durability.Allows 360° rotation, 180° pan, 75° tilt, and 90° pivot for personalized screen angles.Designed without drawers or bays to maintain a clean and minimal profile.Weighs 19.2 lbs., ensuring stability without compromising flexibility.Mounts using VESA MIS-D 75 x 75 mm and 100 x 100 mm patterns.Measures 11.5" H x ~32" W x 24.5" D when fully extended from the wall.Certified to BIFMA level® 2 for low environmental and social impact.Ergotron 10-year limited warranty.
Desk Mount Dual Monitor Arm - Desk Clamp / Grommet VESA Monitor Mount for up to 32 inch Displays - Ergonomic Articulating Monitor Arm - Height Adjustable/Tilt/Swivel/Rotating (ARMDUAL2).32 INCH LARGE MONITOR SUPPORT: VESA 75x75mm / 100x100mm compatible multi monitor mount supports 2 large monitors up to 32" (17.6 lb. / 8 kg) per arm w/ horizontal articulation & basic height adjustment.ADJUSTABLE SET UP: Use the desk-clamp (C-clamp) or grommet to easily mount and tighten by hand. Adjust the height and angle quickly with the included tools attached to the cable management clips.EASY DISPLAY ROTATION: This desk mount dual monitor arm has articulating arms that support toolless monitor rotation from landscape to portrait positioning for viewing longer pages without scrolling.SMALL FOOTPRINT: Space-saving design enhances the work area and built-in adjustable cable management clips along the arms and center pole keep cables organized for a presentable workspace.WIDE RANGE OF MOTION: Double monitor mount increases ergonomic comfort and productivity with +45/-45° tilt, +90/-90° swivel, 360° rotating display, and adjustable height along the 15.7" (39.8 cm) pole.Dimensions: 21.57"H x 35.94"W x 5.83"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.5-year manufacturer limited warranty.Monitor Mount | Desk/Grommet | Double Joint | Adjustable | For up to 32" Monitors
Experience ergonomic excellence with the Ergotron LX Pro Adjustable Wall Monitor Arm. Designed for modern workspaces, this sleek black arm supports monitors up to 34" and 22 lbs., offering smooth lift, tilt, pan, and rotation with Constant Force™ technology. Its wall-mounted design frees up valuable desk space while keeping your screen within reach or stowed away just 4" from the wall. Built-in rotation stops protect surrounding surfaces, and the durable aluminum construction ensures long-lasting performance. Ideal for offices, healthcare environments, or compact setups, the LX Pro delivers style, flexibility, and comfort—backed by a 10-year warranty..Mounts directly to wall for space-saving monitor placement.Supports screens up to 34" for flexible viewing setups.Offers 13" lift for ergonomic height adjustment.Finished in black with durable aluminum construction.Enables 360° rotation, 85° tilt, and full swivel articulation.Stows monitor within 4" of wall to maximize space.Weighs 6.0 lbs. for lightweight yet sturdy installation.Compatible with VESA 100 x 100 mm and 75 x 75 mm standards.Measures approx. 17" H × 10" W × 4" D for compact use.Certified to ANSI/BIFMA and HCAI/OSHPD standards.Ergotron 10-year limited warranty.
This 3-panel monitor stand allows the connection of flat panel monitors through standard VESA mounting brackets. Our revolutionary hinge modules are designed to enable display monitors to be rotated, swiveled and tilted. The engineering of the AMR3S32 is designed to meet high ergonomic expectation and to be rugged without compromising the aesthetics of the design. The AMR3S32 is constructed with aluminum alloy to ensure sturdiness and allow for the mounting of individual monitors that weight 10Kg (22.05 Lbs.). The device is suitable for 26"-32" monitors. Some 32" monitors require an offset placement to fit on the mount. Offset assembly instructions can be found in the Downloads section or from link below:.Features: Swivel, Tilt, 360 deg Rotation, Rugged.Maximum Load Capacity: 66.14 lb..Maximum Screen Size Supported: 32"
Free up space while creating an ergonomic work environment. This desk-mount monitor arm makes it easy to securely mount your display above your desk or table and adjust the height with one touch. You can mount a display ranging in size from 13" to 32" (330 mm to 813 mm), and the monitor arm features an attractive black finish that complements your workspace. Mount Your Monitor to Save Space : This heavy-duty monitor arm saves space on your work surface by elevating your monitor above your desk or table. One-Touch Height Adjustment : The monitor-mount arm features a gas-spring cylinder that makes it easy to raise or lower your display, with up to 13.1" (335 mm) of height adjustment. Adjust the tension according to the weight of your monitor, to re-position the monitor height effortlessly. Adjust Your Monitor for Ideal Viewing : The full-motion articulating monitor arm extends up to 23.8" (605 mm) so it's easy to find the right viewing angle. Swivel your monitor 180 degrees to share your display, while collaborating with others. Tilt your screen 90 degrees for comfortable viewing or rotate it 180 degrees for landscape or portrait viewing. Easy Installation : The VESA monitor mount is easy to install (desk C-clamp or grommet mount) and offers built-in cable management. The detachable VESA panel makes it simple to attach or remove your monitor. ARMPIVOTHDB is backed by a StarTech 2-year warranty and free lifetime technical support..Single-monitor arm saves space by letting you mount a monitor up to 32" (813 mm) weighing up to 19.8 lb. (9 kg).Durable, heavy-duty aluminum construction with attractive black finish.Easy one-touch height adjustment (up to 13.1" /335 mm) with gas spring arm.Hassle-free installation with detachable VESA panel and integrated cable management.Articulating arm rotates and swivels 180, and provides +90 / -90 tilt
Whether you are working from home or in an office, this monitor stand with spring assisted arm allows you to adjust your monitor height to your personal ergonomic viewing position. It comes with a stable, freestanding base which means you can easily place it anywhere without having to worry about clamp or grommet mounting. The monitor stand fits screens between 17" and 32" in size with a weight between 4.4 and 17.6 lbs. and comes with a quick release VESA plate (75x75 & 100x100) for easy installation. If you ever want to turn your screen to share it or reduce glare, the integrated swivel feature allows for up to 25° turning left and right. The screen itself can be rotated 180° left and right so that you can view it in horizontal as well as vertical orientation. Keep your cords organized and your workplace neat with the integrated cable management..This freestanding monitor arm with stable base allows you to adjust the height of your screen and achieve an ergonomic viewing experience.The stand supports a single monitor between 17" to 32" in size, including curved screens..The monitor height can be adjusted up to a maximum of 20.6 inches..This monitor arm is black in color and made from steel for durability..The mount allows for ±25° swivel, +10°/-15° tilt, ±180° screen rotation and pivot, and provides a wide viewing angle of up to 180°..The assembled dimensions are 20.6 inches in height, 10.6 inches in width, and 7.9 inches in depth..It is compatible with VESA mounting patterns of 75x75mm and 100x100mm..An integrated cable management system keeps your cords organized and the quick release VESA plate ensures easy monitor installation.Perfect for office and home use.Supported by Limited Lifetime Warranty.Work Comfortably with Effortless Monitor Height Adjustments, Quick and Simple Monitor Positioning, No Clamp Needed
The Ergotron LX HD Sit-Stand Wall Arm transforms your workspace with smooth height adjustment and full-motion flexibility. Whether you're sitting, standing, or presenting, this polished aluminum arm supports monitors up to 46" and 30 lbs., extending up to 33" and folding back to save space. Built with Constant Force™ technology and tested for 10,000 cycles, it delivers reliable ergonomic performance for dynamic environments. Ideal for offices, healthcare, and creative spaces, this sleek wall-mounted solution keeps cables organized and screens secure—so you stay focused and productive..Designed as a wall-mount arm for sit-stand monitor use in dynamic workspaces..Supports one monitor up to 46" with a weight range of 14–30 lbs..Adjusts vertically with 20" of lift for seated or standing work positions..Finished in polished aluminum for a sleek look and durable performance..Enables 75° tilt, 90° rotation, and 360° pan for flexible screen positioning..Compact design with no drawers, bays, or shelves for space-saving installation..Weighs 11.1 lbs., ensuring sturdy support without bulk..Certified to Clean Air GOLD and HCAI/OSHPD standards for safe indoor use..Compatible with VESA MIS-D, MIS-E, and MIS-F mounting patterns..Ergotron 10-year limited warranty.
Maximize your workspace and comfort with the Fellowes Professional Series Freestanding Dual Stacking Monitor Arm. Designed to support two monitors up to 32 inches and 17.6 lbs each, this freestanding solution is ideal for environments where clamp or grommet mounting isn't possible. Its vertical stacking design saves valuable desk space while promoting ergonomic viewing to reduce eye, neck, and shoulder strain. The low-profile, weighted base ensures stability, and the integrated cable management system keeps your setup clean and organized. Perfect for professional settings that demand both flexibility and functionality..Free-standing design allows dual monitors to be used in spaces that do not allow a clamp or grommet mount.Create a multi-display productive workspace and position your monitors to reduce eye, neck and shoulder strain.Save space in tight workspaces with a dual stacked position.Low profile, weighted base provides enhanced stability.Minimize clutter with the intuitive cord management system.Holds 32” monitors up to 17.6 lbs..Meets VESA mounting standards.Dimensions: 35.5"H x 15.31"W x 11"D.3-year manufacturer limited warranty
MI-35114 single monitor wall mount features an articulating gas spring arm for smooth full motion monitor adjustments. From height adjustment, to monitor tilt, swivel and rotation, this monitor wall mount is designed to save space while improving posture by raising the monitor to eye level in any type of environment. This premium monitor wall mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add, remove, shorten or lengthen the monitor-mounting arm, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The easy to install wall mount requires only a single stud for installation making it a quick addition to any workspace. The arm features a cable management port to hide and organize cables for a clean look. Fits monitors measuring in size up to 32” and can hold up to 19.8lbs..Single Monitor Wall Mountcompatible with screens up to 32".Tilt, Swivel, Full Motion and Articulating Features.Each monitor can tilt up or down 105 degrees and rotates 360 degrees.Load capacity 20 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty
Choose a monitor arm that's as adaptable as you. With the HX desk dual monitor arm, you can easily reposition two 32" monitors using patented Constant Force technology. The hinged bow lets you easily pan your monitors for screen sharing and more comfortable views..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 32" monitors for versatile use.75-degree tilt, 75-degree pan, and 75-degree rotation adjustment options enable optimal viewing.Weighs 22.7 lbs..Compatible with: VESA 100 x 100mm mounting patterns.Comes in matte black.10-year manufacturer limited warranty
Raise your monitor to a comfortable viewing height with this monitor arm..Supports up to 42" monitors for versatile use.Made of aluminum.-90 to 90-degree tilt and 360-degree rotation adjustment options enable optimal viewing.360-degree rotation allows monitors to be oriented vertically or horizontally.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.3-year manufacturer limited warranty
Whether at home or in the office, everyone deserves a workspace that looks great and makes them feel their best. Create a neat, productive workspace with this affordable monitor arm that's easy to set up and backed by Ergotron's trusted reputation for quality..Single Monitor Mount, Material & Color: Black.Desk Clamp attaches to surface edge up to 1.97" (50 mm) thick.Capacity ≤ 17.6 lbs.Tilt: 35°.Pan: 180°.Rotation: 360°.Warranty: 5 years
This incredibly versatile product supports up to four 32" monitors: each with a maximum individual weight of 26.5 lbs.:. Not only will this strong and sturdy: mount have no trouble holding VESA certified: 75x75 or 100x100 monitors, (fitting the above criteria), it is also extremely adjustable! Each monitor can be placed at a different height to accommodate different sized monitors:. All four monitors have 360 degrees rotation: (meaning landscape, portrait, or anything in-between). Also included is a +/- 20 degrees tilt in any direction Individually for ALL 4 Monitors:, ensuring maximum user comfort. Height adjustable, with a maximum height of approximately 36.6": from the desk to the center of the highest mounting device . Benefits of Clamp Mounting: Clamp Bases are an excellent mounting option! They are screwed onto the edge of a desk for maximum space. (Clamp bases require a lip on the desk 8-50 mm thick and 85 mm deep) They are the sturdiest mount of the three kinds (stand, clamp and grommet). They take up the least amount of desk space (So much more room for activities!)..Compatibility: 4 x LCD Monitor.Country of Origin: Taiwan.Device Supported: Flat Panel Display.Made of aluminum.15-degree tilt, 15-degree pan, and 15-degree rotation adjustment options enable optimal viewing.Weighs 22.7lbs..Dimensions: 38"H x 41.97"W x 5.67"D.Compatible with: VESA 100 x 100mm mounting patterns.3-year manufacturer limited warranty
The premium single display desk mount is built for environments where style, workplace adaptability, ergonomic support, and a high range of movement are paramount. Its spring-assisted design with three points of articulation and landscape to portrait rotation enables effortless adjustment from a seated position and makes it the ideal solution for Activity Based Workplaces. The arm incorporates a spring tension visual gauge indicator to save time and effort with multiple installations. Built from lightweight and yet durable aluminum, the mount can be easily recycled at the end of its life..Single Display Desk Mount, Ideal for displays up to 32".Flat Screen Monitors: maximum load up to 20lbs..Curved Screen Monitors: maximum load up to 13.5lbs..Direct to desk 24" dynamic arm desk mount.Built from lightweight and yet durable aluminum. Color: Silver.Includes spring assisted height adjustability, maximum arm reach is 24", tilt adjustment is 45 degrees up and 45 degrees down. Can rotate up to 360 degrees around pole, and can accommodate portrait and landscape screen rotation..10 lbs..VESA 75x75 to 100x100.Package dimensions: 22.30" x 12.40" x 6.60"
MI-1772 is one of our premium desk mounts that merges functionality with aestatics. Increase viewing comfort-help reduce eye, back and neck strain. Swift and easy movements and adjustments. The spring arm tension can be adjusted to suit the weight of the monitors, allowing fingertip height adjustment. Dual side-by-side monitor arm adjusts effortlessly for easy use. Full motion arms extend and retract, tilt, swivel and adjust in height. You can also rotate the monitors independently to switch between landscape and portrait modes. By elevating your monitors above your desk, increase desktop space and get ergonomic positioning of your screens fore reduced strain and better sitting posture..Dual Monitor Desk Mount Stand fits most of 13" -32" Displays.Tilt, Swivel, Full Motion and Rotating Features.Dual base allows c-clamp or grommet connection.Height Adjustable to 13".Holds monitors up to 19.8 lbs. per arm.Supported by manufacturer's limited lifetime warranty.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Height Adjustable Full-Motion Articulating Desk Mount integrates fashion with function, delivering ergonomic performance with style.