Allied Telesis Ethernet Network Adapters

Allied Telesis™ AT-2711FX/SC-901 Network interface card offers 1.2 miles of maximum transfer distance and supports ACPI function. Card with PCI express x1 interface features IEEE 802.1p standard and fast Ethernet data link protocol. Interface card with SNMP remote management protocol has Ethernet 100Base-FX cabling. Wired network interface card with plug-in card form factor features BCM5752 Broadcom processor and 72KB RAM..Desktop network interface card is use to give maximum possible bandwidth.Measures 2.7"H x 3"W.Features fast Ethernet data link protocol for high performance and transfers data at the rate of 100 Mbps.Supports PCI Express x1, SC 100Base-FX host interface for easy connectivity & has plug-in-card form factor for economical ethernet network connection.Features status indicators on for link up, off link down and blink for activity.Supports Broadcom BCM57762 network controller for high performance.Consumes 2.0 W max. power and uses 3.3 signaling voltage.Meets IEEE 802.1p Quality of Service, IEEE 802.1Q VLAN tag, IEEE 802.1as 1588 precision time protocol, IEEE 802.1qat interface standards.Operates with the maximum cabling distance of Up to 6560' in full-duplex.MSI and MSI-x, IEEE 802.1x flow control, Audio/Video Bridging (AVB), IEEE 802.1p-based traffic prioritization, TCP Checksum RX/TX supported.Operates efficiently on Windows 8/7/Vista/XP (32-bit, 64-bit), Windows Server 2008, Windows Server 2008 R2 operating systems.Has a operating temperature of 0 - 50 deg C and -25 - 70 deg C storage temperature to adjust for all environmental conditions.Includes full-height bracket and low-profile bracket to connect easily for desktop.Meets RoHS, UL, FCC/EN55022 Class B, TUV, EN55024, CE, C-TICK, VCC, TAA certifications and standards.Weighs 50 g.Min operating system: Linux 2.4, Linux 2.6, Microsoft Windows 2000/XP/Vista/7, Microsoft Windows Server 2003, Microsoft Windows Server 2008, Novell NetWare 6.x.Humidity range operating: 5 - 90% (non-condensing).Operating temperature: 32 - 122 deg F.Compliant standards: C-Tick, EN55022 Class B, EN55024, FCC Class B certified, RoHS, TUV, UL, VCCI.Warranty: Lifetime limited.Allied Telesis™ Network interface card provides up to 100Mbps data transfer rate. Card offers you the maximum possible bandwidth and bus efficiency.

The Allied Telesis Gigabit Ethernet card supports data transfer of up to 250Mbps with PCI Express card and 1000Mbps using 1000Base-X technology. This card facilitates optical fiber cable to span longer distances and excellent data transfer rate between servers and network components..Enjoy superfast data transfer of up to 250 MB/s with PCI Express card, between the network card and motherboards.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.With the 1000Base-X technology get up to 1000Mbps data transfer rate over the supported network cable

Allied Telesis™ Gigabit ethernet card is featured with jumbo frames to send large packets and these packets are normally up to 9000 bytes long. Gigabit ethernet is featured with PCIe x1 bus to enable maximum throughput..Flow control, ACPI support, auto-negotiation, load balancing, VLAN support, full duplex mode, jumbo Frames support.Data transfer rate: 1 Gbps.Host interface: PCI Express x1.Dimensions: 2.7"(H) x 3.6"(W).Form factor: Plug-in card.Wavelength: 850 nm.Max transfer distance (Optical): 720'.Status indicators: Link activity, link OK.Card height: Full-height, low-profile.Optical sensitivity: -17 dBm.Output optical power: -9.5/-1.5 dBm.Multi-mode fiber.VLAN support.jumbo frames.Weight: 2.08 oz..Allied Telesis™ Gigabit ethernet card is used to boost the speed of the network and is limited to a maximum size of 1548 byte.

The Allied Telesis™ 2911 Series AT-2911SX/ST-901 1000SX ST PCI Express x1 Gigabit network adapter is compatible with Windows 10/8/7/Vista/XP/Server 2008 R2/Server 2008/Server 2003 64- or 32-bit, Server 2012 R2 64-bit/Server 2012, 64-bit and Linux 2.6. It includes 1000SX/ST connector. It has -17 dBm optical sensitivity, -9.5/-4 dBm optical power output and 850 nm wavelength. It features various status indicators such as LED On for link up, LED Off for link down and blinking for activity indication. It consumes 1.51 to 2.42 W power and requires signaling voltage of 3.3 V. It supports 1000Base-SX network technology..Gigabit network adapter delivers faster, more efficient processing of network traffic.Dimension: 3.5" x 2.7".Bus type: PCIE.Bus width: PCIEx1.Interface type and connectors: 1000SX/ST connector, Optical sensitivity: -17 dBm, Output optical power: -9.5/-4 dBm, Wavelength: 850 nm.Compatible OS: Windows 10/8/7/Vista/XP/Server 2008 R2/Server 2008/Server 2003 64- or 32-bit, Server 2012 R2 64-bit/Server 2012, 64-bit, Linux 2.6.Ethernet: IEEE 802.1p Quality of Service, IEEE 802.1Q VLANs, IEEE 802.2 LLC, IEEE 802.3ac MAC, IEEE 802.3az Energy-Efficient Ethernet.Status indicators: LED On: Link up, Off: Link down, Blinking: Activity.Media type supported: Optical fiber.Number of ports: 1, Power: Power consumption: 1.51 to 2.42 W (varies by model), Signaling voltage: 3.3 V.Network technology: 1000Base-SX.Form factor: Plug-in card.Meets RoHS, UL, FCC/EN55022 Class A, TUV, EN55024, CE, C-TICK, VCCI, IEEE 802.3ae, IEEE 802.3ad, IEEE 802.1Q, IEEE 802.1p certifications and standards.Weight: 0.13 lb

The Allied Telesis™ AT-2914SX/LC-901 Optical fiber network adapter provides 1 Gbps networking over an existing optical fiber media. It features PCIe x1 slot for high-speed connection. This plug-in card supports 1000Base-SX network technology for added flexibility..Network adapter delivers high performance.Speed: 1 Gbps.Dimensions: 2.7"H x 3.5"W.Meets RoHS, REACH, WEEE, C-Tick, EN55022 Class A, EN55024, RoHS, TUV, UL and VCCI certifications and standards.Host interface: PCIe x1.Media type supported: Optical fiber.Network technology: 1000Base-SX.Color: Green/silver, Form Factor: Plug-in card.Connectivity: Wired.Network standards: IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.2, IEEE 802.3ac, IEEE 802.3ad (LACP), IEEE 802.3z.System requirements: Linux, Microsoft Windows Vista/7/8/10.Remote management protocol: SNMP, Status indicators: Link/activity

Add a 1GbE SFP module to a PCI Express (PCIe) 2.1 x1 (or higher) slot in an IT Administrator workstation or server backplane, using StarTech this 1-Port SFP network controller. The network controller features an Intel I210 chip known for its reliability and high-performance capabilities, offering low-latency and low CPU utilization, ensuring smooth and efficient network data transfer, which is critical for business applications and services. Support for VMDq, SR-IOV, and Intel VT-c technologies allow for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities. The PCIe network card supports PXE boot, enabling centralized operating system deployment and updates. It also features 9K jumbo frame support, reducing packet overhead for improved data transmission efficiency. VLAN tagging support allows for efficient network management and segmentation..Network controller to add a 1GbE SFP module to a PCI Express (PCIe) 2.1 x 1 (or higher) slot in your workstation.Provides Ethernet speeds up to 1Gbps.Has one SFP slot.Compatible with both MSA-compliant and branded 1GB SFP modules, as well as direct attach copper cables (DACC).Meets or exceeds WEEE standards.Intel I210 chip offers low latency and low CPU utilization and ensures smooth and efficient network data transfer, which is critical for business applications and services.Support for VMDq, SR-IOV, and Intel VT-c technologies allows for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities.SFP slot for interchangeable SFP modules allows selecting fiber transceiver modules that best suit the network needs of the application, based on the distance and connector type.Full-profile bracket are installed by default, with a low-profile bracket included.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.2-year manufacturer limited warranty

The Allied Telesis™ AT-SPSX-90 SFP (mini-GBIC) module is perfect for data networking and optical network. This multi-mode module with SX network works based on 1000Base-SX Gigabit Ethernet technology. The hot-swappable module supports a maximum distance of 1804.46' and maximum data transfer rate of 1.25 Gbps. It has 1 x LC 1000Base-SX network interface for external connections. This module supports 62.5/125 mu m and 50/125 mu m optic fiber..Hot-pluggable SFP (miniGBIC) module is perfect for data networking.Connectors: 1 x LC.Ethernet technology: Gigabit Ethernet.Network technology: 1000Base-SX.Data transfer rate: 1 Gbps.Media type: 62.5/125 mu m, 50/125 mu m multi-mode optical fiber.Maximum reach: 220m/550m.Wavelength: 850 nm.Meets Eco, RoHS, WEEE, REACH standards

Increase your bandwidth up to 10 Gbps with this StarTech SFP+ card for enhanced data transfer rate using fiber optic cable. Reduce wait times for large file transfers, content sharing, network storage, or any other high bandwidth application. This PCIe network card has an open SFP+ slot that can accept any MSA-compliant module or direct attach cable (DAC). It is compatible with multimode, single-mode, and copper SFP+ modules. This card is natively supported in Windows 11. For security and privacy reasons a fiber network card is the ideal point-to-point network adapter. Eliminate EMI with a fiber connection and cover longer distances with fiber to host..Network controller to add a 10GbE SFP+ module to a PCI Express (PCIe) 3.0 x 4 slot in your workstation.Provides Ethernet speeds up to 10Gbps.Has one SFP+ slot.Compatible with both MSA-compliant and branded 10GB SFP+ modules.Meets or exceeds the RpHS and WEEE standards.An open SFP+ slot to make changes as needed just by swapping the module in use, whether it is fiber, copper, or direct attach cables (DAC).9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network managemen.Full-profile bracket are installed by default, with a low-profile bracket included.2-year manufacturer limited warranty

The Intel Ethernet Network Adapter I226-T1 is ideally suited for personal computers and workstations used for enterprise, gaming, and home networks. These systems require more bandwidth than ever before. This ultra-compact, easy-to-integrate PCIe 3.1 x1 adapter, is a cost-effective networking solution for speeds up to 2.5GbE. The I226-T1 is also designed with a ventilated bracket, for increased efficiency and reduced power consumption..Ethernet Network Adapter.Maximum Data Transfer Rate: 2.50 Gbit/s.Network Technology: 2.5GBase-T.Form Factor: Plug-in Card.Bracket Height: Low Profile and Full Height.Device Supported: Computer/Workstation.Chipset Model: I226-LM.Host Interface: PCI Express 3.1 x1.Number of Network (RJ-45) Ports: 1

Add up to two 1GbE SFP modules to a PCI Express (PCIe) 2.0 x1 (or higher) slot in an IT Administrator workstation or server backplane, using this 2-Port SFP Network Controller. The network controller features an Intel I350 chip known for its reliability and high-performance capabilities, offering low-latency and low CPU utilization, ensuring smooth and efficient network data transfer, which is critical for business applications and services. Support for VMDq, SR-IOV, and Intel® VT-c technologies allow for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities. The PCIe network card supports PXE boot, enabling centralized operating system deployment and updates. It also features 9K jumbo frame support, reducing packet overhead for improved data transmission efficiency. VLAN tagging support allows for efficient network management and segmentation..Network controller to add a up to two 1GbE SFP modules to a PCI Express (PCIe) 2.0 x1 (or higher) slot in your workstation.Provides Ethernet speeds up to 1Gbps per port.Has two SFP slots.Compatible with both MSA-compliant and branded 1GB SFP modules, as well as direct attach copper cables (DACC).Meets or exceeds WEEE standards.Intel I310 chip offers low latency and low CPU utilization and ensures smooth and efficient network data transfer, which is critical for business applications and services.Support for VMDq, SR-IOV, and Intel VT-c technologies allows for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities.SFP slots for interchangeable SFP modules allows selecting fiber transceiver modules that best suit the network needs of the application, based on the distance and connector type.Full-profile bracket are installed by default, with a low-profile bracket included.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.Features a built-in heat sink to keep the controller chip at optimal temperatures, ensuring sustained performance.2-year manufacturer limited warranty

This StarTech five-port USB 3.2 Gen 2x1 (10Gbps) combo card makes it easy to add to the performance and connectivity of your computer. The USB 3.2 card offers a USB Type-C port (10Gbps), two traditional USB Type-A ports (10Gbps), and a motherboard header (USB 5Gbps). By offering a range of USB port types, you can easily connect a variety of modern and legacy USB devices, both inside and outside your computer. Because the card offers a 10Gbps USB ports, you can save time and avoid the performance bottlenecks that are often associated with other connectivity technologies..This five-port USB 3.2 Gen 2x1 (10Gbps) combo card makes it easy to add to the performance and connectivity of your computer.PCI Express combo card leverages the performance potential of USB 3.2 Gen 2x1 (10Gbps) to help you work faster.Contains a USB Type-C port (10Gbps), two traditional USB Type-A ports (10Gbps), and a motherboard header (USB 5Gbps).Dimensions: 0.6"H x 4"W x 2.7"D.Lets you bridge the gap between devices that use different connectors; you can simultaneously connect and access USB Type-A and USB Type-C devices, while using only a single PCI Express expansion slot.By adding three types of USB ports in one combo card, you can free up space in your PC case, and eliminate the nuisance of having different cards for different USB devices.With two internal motherboard-style headers, this dynamic USB 3.1 card is perfect for upgrading or building your own computer.Backward compatible with legacy USB 3.0, 2.0 and 1.1 devices, so you can eliminate the added expense and aggravation of purchasing new devices.Great for file backups, video editing, and data recovery, using high-bandwidth USB 3.1 Gen 2 external storage solutions.2-year manufacturer limited warranty

This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. The variable multi speed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration.This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity.The variable multi speed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware.Contains PCI Express, SATA power (15 pin), and RJ-45 (PoE+).Supports the IEEE 802.3af and IEEE 802.3at (Type 1 and Type 2) standards for Power Sourcing Equipment (PSE) and can deliver up to 48V DC and 25.5W of power to compliant Powered Devices (PD).Leverages Intel vPro technology for remote management and troubleshooting capabilities. Improve bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and the streaming of online content.Access up to 2.5GBASE-T speeds using Cat5e (or better) cabling, to maximize existing networks and equipment.Connect Power over Ethernet enabled IP cameras, phones, or Wireless Access Points.Provide power to remote powered devices that require a PoE power source.Add multi-gigabit connectivity to a desktop or server.Compatible with Windows 10, 11; Windows Server 2019, 2022; Linux 5.8.x and up.Box contains: network card, low-profile bracket, quick start guide.2-year manufacturer limited warranty.This card supports the following advanced features: PXE Boot, WoL, VLAN tagging, 9 K jumbo frame, full-duplex, and Intel vPro technology..This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. The variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration.

2-Port 10Gbps USB-A & USB-C PCIe Card - USB 3.1 Gen 2 PCI Express Type C/A Host Controller Card Adapter - USB 3.2 Gen 2x1 PCIe Expansion Add-On Card - Windows, macOS, Linux (PEXUSB311AC3).COMPATIBILITY: Installs in full or low-profile PCIe 3.0 x4 desktop/server slot (lower performance w/PCI-e 2.0); Windows/Linux/macOS auto driver install (Windows 8 & up); Works with USB 3.2/3.1/3.0/2.0.HIGH PERFORMANCE: USB 3.1 Gen 2 or USB 3.2 Gen 2x1 PCIe Add-On card supports Multiple INs, maintains max bandwidth even when mixed speed devices are connected; 10Gbps per port; 1x USB-A & 1x USB-C | Upgraded version of our popular card PEXUSB311AC2.MAX PERFORMANCE WITH USB DEVICES: 2-port USB-A & USB-C PCIe card adapter supports USB Attached SCSI Protocol (UASP) optimizing USB performance w/ external storage devices like SSDs, HDDs, NVMe drives.POWER: Expansion card w/ SATA power supplies supplemental power to the USB ports (when motherboard power is insufficient) providing up to 5V 3A/15W via the USB-C port & 5V 0.9A/4.5W via the USB-A port.THE STARTECH.COM ADVANTAGE: StarTech.com offers a 2-year warranty & free lifetime 24 hour support on this dual port USB-A & USB-C PCI Express Host Controller card w/ full & low profile bracket incl..PCIe 3.0 | USB Type-C & USB Type-A | 5V 3A/15W via USB-C | 5V 0.9A/4.5W via USB-A | UASP

1-Port USB 3.2 Gen 2x2 PCIe Card - USB-C SuperSpeed 20Gbps PCI Express 3.0 x4 Host Controller Card - USB Type-C PCIe Add-On Adapter Card - Expansion Card - Windows & Linux (PEXUSB321C).COMPATIBILITY: Add-on card installs in full or low-profile (bracket incl) PCIe 3.0 x4 slot (Backward compatible w/PCIe 2.0); Windows/Linux/macOS w/auto drivers Win 8 & up; Works w/USB 3.1/3.0/2.0 devices.FULL USB 3.2 GEN 2X2 SPEEDS: Featuring the ASMedia ASM3242 host controller using x4 lanes of PCIe 3.0, this card is fully capable of speeds up to 20Gbps enabling fast access to high-performance devices like NVMe drives and SSDs.HIGH PERFORMANCE: Add 1x USB-C SuperSpeed 20Gbps port to your desktop PC with this USB 3.2 Gen 2x2 PCIe Card; Expansion card provides up to 15W (5V @ 3A) to power & charge devices.MAXIMIZED USB PERFORMANCE: USB Type-C PCI Express card supports Multiple INs to reduce bandwidth loss when mix speed devices are connected to a Hub (hub must also support this feature); UASP support improves performance with storage devices.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years; This USB-C PCI-e adapter card is backed for 2-years by StarTech.com, incl. free 24/5 North America based multi-lingual tech support.USB 3.2 Gen 2x2 (20 Gbps) | PCI-Express 3.0 | PCIe x4 Slot | USB Type-C

This eco-friendly WebSmart switch conforms with the Allied Telesis commitment to environmentally friendly processes and products. It is designed to minimize power consumption through the use of a high efficiency power supply..Network management type: Smart switch.Ports: 24 ports.Port configuration: 24 x RJ-45 10/100/1000Base-T.Buffer memory: 512 KB.Address database size: 8000 MAC addresses.Lifetime limited warranty.Management: Web based management, Port based VLAN, 802.1p QoS, port trunking.Static multicast group.Spanning tree, 802.1d/w.Power: 120 - 230 VAC, 50 / 60 Hz.Number of SFP slots: 4.Number of total expansion slots: 4.Media type supported: Twisted pair.Includes: AT-GS950/24 24 port gigabit websmart Switch, wall and 19" rack mount brackets, U.S. power cord.Compliant standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.1x.Allied Telesyn™ AT-GS950/24 Ethernet Switch features 24 ports, twisted pair, and gigabit ethernet.

This Gigabit Ethernet card guarantees a replacement networking interface to client, server or workstation.For super-fast data transfer between your network and computer, the adapter takes advantage of the USB 3.0 connectivity.Connect to a wired network with this single port network adapter for a hassle-free and quick response