Cisco SFP Optics

The Cisco multi-mode rugged SFP module adapts your switch or router, enabling you to connect long-range cables. As a result, you can extend the range of your network and expand connectivity. The SFP module is made with an intuitive design that is easy to install and use, so you can expand your network quickly and with minimum hassle..Interfaces/ports: 1 x LC duplex 100Base-FX.Dimensions: 0.33"(H) x 0.52"(W) x 2.22"(D).Compatibility: Cisco 100 m Ethernet SFP Compatibility matrix.Connectivity technology: Wired.Optical wave length: 1310 nm.Temperature: 122 deg F max operating.Compliant standards: IEEE 802.3, IEEE 802.3ah.Connectivity media: Multi mode fiber 100Base-FX.Max transfer distance: 1.2 miles.Data transfer rate: 100 Mbps fast ethernet.Form factor: Hot-swappable.90 days limited warranty.Cisco Multi-Mode Rugged SFP Module - Hot-Swap Capability

Cisco 100BASE-FX small form-factor pluggable (SFP) fast Ethernet interface converter is a hot-swappable device that plugs into a gigabit Ethernet SFP port on Cisco catalyst 3750 series, 3560 series, and 2970 series switches..Interfaces/ports: 1 x LC duplex 100Base-FX.Dimensions: 0.4"(H) x 2.2"(W) x 1/2"(D).Compatibility: Cisco catalyst 3750, 3560, and 2970 series switches.Connectivity media: 62.5/125 um multi mode fiber, 50/125 um multi mode fiber.Transmit (dBm): 50/125-micron: -23.5 min, -14max, 62.5/125-micron: -20 min, -14max, receive (dBm): 50/125-micron: -33.35 min, -11.8 max, 62.5/125-micron: -33.35 min, -11.8 max.Distance supported: 6.5'.Operating temperature: 32 - 158 deg F, storage temperature: -40 - 185 deg F.Surge current: 350 typical, wavelength (nm): 1270 min, 1300 typical, 1380 max.Power consumption: 1.5 W per port.Input voltage: 3.3 V - 3.5 V device, 3.3 V typical device.Input current: 405 mA typical, 450 mA maximum.Data transfer rate: 100 Mbps fast Ethernet full duplex.MTBF: 12,820,512 hours.Form factor: Hot-swappable.System requirements: Cisco IOS software release 12.2(20)SE1.Application/usage: Data networking.Regulatory and standards compliance: IEC 60825-1.SFP fast ethernet interface converter 100FX SFP on GE SFP ports for DSBU switches.

Cisco™ 1000BASE-EX SFP Transceiver module is hot-swappable and supports a 1310 nm wavelength signaling. Module operates on standard SMF optic link that spans up to a distance of 40 km..Interface/ports details: 1 x 1000Base-EX network.Media and performance: G.652 micrometer single mode optical fiber.Ethernet technology: 1 Gbps gigabit ethernet.Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D).Application/usage: Data networking.Form factor: Hot swappable.Wavelength: 1310-nm, Reach: 40 km.Compatibility: Cisco ME 3400 series ethernet access switches, Cisco catalyst 3750 metro series switches.Weight: 2.65 oz..Warranty: 90 days limited.Cisco™ 1000BASE-EX SFP Transceiver module is designed to connect a gigabit ethernet port to a network and has dual LC/PC single mode connectors.

The Cisco transceiver module has one LC duplex 10GBase-LR port, and it is compatible with the Alcatel-Lucent Omniswitch 6900, making it easy to install and use with your system. The piece is hot swappable and allows you to select the interface of your choice for flexibility. It is the smallest 10G form factor, so it saves you space..Interfaces/ports: 1 x LC duplex 10GBase-LR.Dimensions: 0.3"(H) x 1/2"(W) x 2.2"(D).Compatibility: Alcatel-lucent omniswitch 6900.Smallest 10G form factor.Supports 10GBASE Ethernet and OTU2/OTU2e.Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch.Provides flexibility of interface choice.Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link.Supports "pay-as-you-populate" model.Supports digital optical monitoring capability.Supports the cisco quality identification (ID) feature that enables a Cisco switch to identify whether the module is certified and tested by Cisco.Form factor: Hot-swappable.Cisco Transceiver Module - Switch Accessories for Networking

The Cisco SFP28 (Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications. The 25G Modules are based on SFP28 form factor. This short reach module supports a link length of up to 300/400m over OM3/4 at 10G, and up to 300/400m over OM3/4 at 25G. It also supports link lengths of 82m over OM2 at 10G, and up to 70m over OM2 at 25G. This module requires RS-FEC on the host port for full reach operation at 25G. Using BASE-R FEC the module can support 70/100m over OM3/4 and with-out FEC it can support 30/50m over OM3/4 at 25G. For 10G operation FEC is not required..This module offers high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications.Wavelength: 850nm.Supports FCoE with the appropriate host s/w support.Features dual LC/PC connector

The Cisco small form-factor pluggable portfolio offers customers a wide variety of high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications. The 25G Modules are based on SFP28 form factor..Transceiver module for MMF.Pull tab comes in beige.Supports a link length of 70/100m on OM3/4 MMF.Requires RS-FEC on the host ports.Maximum power consumption: 1.2W.Wavelength: 850nm.Cable type: MMF.Core size: 50 microns.Modal bandwidth: 2000 OM3/4700 OM4/4700 OM5 on 70/100/100m cable distances.Support FCoE with the appropriate host s/w support.5-year manufacturer limited warranty

The Cisco SFP-10G-LR-S= SFP+ module measuring 0.3" x 0.5" x 2.2", supports a link length of 10 km on standard single-mode fiber. It has LC/PC duplex 10GBase-LR network interface for optimal connectivity. This hot-swappable module transmits data over optical fiber media..SFP+ module is suitable for SMF.Dimensions: 0.3"H x 0.5"W x 2.2"D.Has one LC/PC duplex 10GBase-LR network port for connectivity.Supports 10 Gigabit Ethernet technology for high speed connectivity.Supports single-mode fiber.Optical fiber media for quick data transfer.Network technology: 10GBase-LR.Form factor: Hot-swappable.Perfect for both data and optical networking.Weight: 2.65 oz..Comes with 1 year limited warranty

To ensure that specifications are met over FDDI-grade, OM1 and OM2 fibers, the transmitter should be coupled through a mode conditioning patch cord. No mode conditioning patch cord is required for applications over OM3..SFP+ module is perfect for data networking, optical network.Dimensions: 0.3"H x 0.5"W x 2.2"D.Compatible with A9K-16T/8-B=, ME-3600X-24FS-M=, ME-3600X-24TS-M, N7K-F132XP-15=, N7K-M132XP-12L, WS-X45-SUP7-E/2 networking products.Interface/ports: 1 x LC duplex 10GBase-LRM network.Media type supported: Optical fiber, fiber mode supported: Multi-mode, single-mode, Ethernet technology: 10 Gigabit Ethernet.Maximum data transfer rate: 10 Gbps.Form factor: Hot-swappable, plug-in module.Up to 980', fiber optic cable standard: 62.5 ohm m, 50 ohm m, wavelength: 1300nm.Supports link lengths of 220m on standard fiber distributed data interface (FDDI) grade multimode fiber (MMF).Temperature range: 32 - 158 deg F.Transmit power: -6.5 to 0.5 dBm.Receive power: -8.4(in average) and -6.4 (in OMA) - 0.5 dBm.Connectivity media: 62.5 um, 50 um multi-mode fiber 10GBase-LRM, single-mode fiber 10GBase-LRM.Power consumption: 1 W.Core size: 62.5 - G.652 microns.Cable distance: 220 - 300 m.Cable type: MMF and SMF.Transmit and receive wave length: 1260 - 1355nm.Compliant standards: IEEE 802.3ae, IEC 60825-1, laser class 1.Warranty: 90 days limited.10GBase-LRM SFP transceiver module supports link lengths of 220 m on standard fiber distributed data interface (FDDI) grade multimode fiber (MMF).

The Cisco™ SFP-10G-AOC3M= 10GBASE-AOC SFP+ 3m fiber optic network cable comes with the SFP+ network copper connectors. It offers the data transfer rate up to 10.5 Gb/s and is hot swappable. This cable operates at a temperature range of 0 to 70 deg C..Network cable is well suited for very short distances.Dimensions: 3 m L.Comes in orange color and features copper conductor for better electrical conductivity.Interface: One SFP+ network first end, one SFP+ network second end.Has fiber optic cable for reliable data transfer.Compatible with networking device.Operating temperature: 32 - 158 deg F.Meets RoHS, Green, GR-20-CORE, GR-326-CORE, GR-1435-CORE, ITU-T G.709, IEEE 802.3, ITU-T G.975, ITU-T G.975.1 certification and standards.Comes with 90 days warranty

The Cisco 10/25GBASE-LR Module supports a link length of 10 kilometers on standard Single-Mode Fiber (SMF) G.652 at both 10G and 25G. This module requires RS-FEC on the host ports for operation at 25G..This 10/25GBASE-LR module supports a link length of 10km on standard Single-Mode Fiber (SMF) G.652 at both 10G and 25G.Max power consumption: 1.3W.Meets or exceeds the IEEE 802.3by and IEEE 802.3cc standards.Certified and tested on Cisco SFP28 ports for superior performance, quality, and reliability.This module requires RS-FEC on the host ports for operation at 25G.Transmit and receive wavelength: 1260-1355nm (10G) and 1295-1325nm (25G)

The Cisco™ SFP-10G-AOC1M= SFP+ 3.28' fiber optic network cable features one SFF-8431 SFP+ network connector on both ends. Cable in beige, is perfect for applications requiring high bandwidth. It withstands temperature range of 23 to 158 deg F..Network cable for home or office applications.Dimensions: 3.28' cable.Color: Beige.Interface/ports: One SFF-8431 SFP+ network connector on both ends.Cable type: Fiber optic.Temperature: 23 - 158 deg F operating.Meets RoHS, MSA, UL E116441 and ELV certifications and standards

Cisco™ 100Base-X small form-factor pluggable is optically interoperable with respective 100Base-X ethernet that interfaces on the same link. Plug has max transfer distance of 32810' and optical wave length of 1310 nm..1 x LC duplex 100Base-LX10.Optically interoperable with respective 100Base-X Ethernet interfaces on the same link.Connectivity technology: Wired.Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D), Form factor: Hot swappable.Max transfer distance: 32810', Optical wave length: 1310 nm.Temperature: 32 -122 deg F operating.Data transfer rate: 100Mbps fast ethernet, Connectivity media: G.652 micrometer single mode optical fiber.Compatibility: Catalyst 2960, 2960-24, 2960-48, 2960G-24, 2960G-48, 2960S-24, 2960S-48, 3560, 3560-12.Application/usage: Data networking.Interchangeable with other 100BASE-X SFPs on the same line card.Certification and Standards: IEEE 802.3, IEEE 802.3ah.Cisco™ 100BASE-LX10 SFP XCVR module is a pluggable device that operates on ordinary multimode fiber-optic link and is a hot-swappable input/output device that plugs into fast ethernet ports.

The Cisco 10GBASE SFP+ module gives you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications..Transceiver module gives you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.Comes in gray.Power consumption: 0.1W.Compact 10G form factor for great density per chassis.Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing).Supports “pay-as-you-populate” model for investment protection and ease of technology migration.Digital optical monitoring for strong diagnostic capabilities.Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link.5-year manufacturer limited warranty

Cisco SFP28 to SFP28 active optical cables are direct-attach fiber assemblies with SFP connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks..Active optical cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 9.84'.Features SFP28 to SFP28 connectors (male to male).Features Fiber Optic cable type for your convenience and desired usability.Maximum data transfer rate: 25000Mbps.AOC cable requires BASE-R FEC or RS-FEC on the host ports.Allows you to access all of the networked data, swiftly and securely.Cisco 25G Active Optical Cable 3-meter - 9.84 ft Fiber Optic Network Cable for Network Device, Switch, Line Card - First End: SFP28 Network - Second End: SFP28 Network - 25 Gbit/s

Cisco™ 100Base-LX10 rugged SFP module has wavelength of 1310 nm and is compatible with Cisco™ IE 3000 series switches. Module is used in data networking and has single-mode optical fiber 100Base-LX10 media connectivity..Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D).For Cisco IE 3000 series switches.Hot-swappable when deployed, the switch or router does not have to reboot.Interfaces/ports: 1 x LC duplex 100Base-LX10.Application/usage: Data networking.Data transfer rate: 100 Mbps fast ethernet.Connectivity technology: Wired.Form factor: Hot-swappable.Connectivity media: Single-mode optical fiber 100Base-LX10.Wavelength: 1310 nm.Max transfer distance: 6.2 miles.Operating temperature: -40 - 185 deg F.Supports the Cisco quality ID feature that enables the switch or router to identify whether or not the SFP is a Cisco qualified SFP.Compliant and standards: IEEE 802.3, IEEE 802.3ah.Warranty: 90 days limited.Cisco™ 100Base-LX10 rugged SFP module operates on ordinary single-mode fiber-optic link that spans up to 10 km long and has hot-swappable form factor.

Cisco SFP28 to SFP28 active optical cables are direct-attach fiber assemblies with SFP connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks..Active optical cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 16.4'.Features SFP28 to SFP28 connectors (male to male).Allows you to access all of the networked data, swiftly and securely.Maximum data transfer rate: 25000Mbps.AOC cable requires BASE-R FEC or RS-FEC on the host ports.Network Device supported for better reliance and optimal performance.Features Fiber Optic cable type for your convenience and desired usability.Cisco 25G Active Optical Cable 5-meter - 16.40 ft Fiber Optic Network Cable for Network Device, Switch - First End: SFP28 Network - 25 Gbit/s

The Cisco QSFP module supports link lengths of up to 10 kilometer over a standard pair of G.652 single-mode fiber with duplex LC connectors. The module supports 40GBASE Ethernet rate only. The 40 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed in the device. Does not support FCoE..Transceiver module for MMF.Pull tab comes in blue.Guarantees a link BER of 1E-12 when supporting 10km on SMF.Maximum power consumption: 3.5W.Wavelength: 1310nm.Cable type: SMF.Core size: G.652 microns.Cable distance: 10km.5-year manufacturer limited warranty

The Cisco™ SFP-10G-AOC7M= 10GBase-AOC SFP+ to SFP+ fiber optic direct attach cable in blue color, offers connection within racks and across adjacent racks. The 22.97' direct attach cable with copper media, supports network devices..Twinaxial direct attach cable is perfect for signaling applications.Cable length: 22.97'.Color: Blue.Connectors: One SFP+ on both the ends.Device supported: Network device.Ethernet technology: 10 Gigabit Ethernet.Transceiver type: AOC.Media: Copper.Meets GR-20-CORE, GR-326-CORE, GR-1435-CORE, ITU-T G.709, IEEE 802.3, ITU-T G.975, ITU-T G.975.1, RoHS certifications and standards

The Cisco™ 6.56' brown fiber optic network cable has one SFP+ network connectors on both the end. It works with Catalyst 3560 as well as 3850, Nexus 93XX as well as X9464, ONE Nexus 93XX and UCS 5108 blade server chassis. This cable has copper conductors for enhanced conductivity..Network cable for reliable connection.Cable length: 6.56'.Connections: One SFP+ network connectors on both end.Connectivity: Wired.Material: Copper conductor.Meets ELV, GR-20-CORE, IEC 60825-1, ITU-T G.709, Laser Class 1, RoHS, UL standards and certifications.Color: Brown.Cable type: Fiber optic.Compatibility: Catalyst 3560, 3850, Nexus 93XX, X9464, ONE Nexus 93XX, UCS 5108 blade server chassis

Cisco™ Downstream SFP module is a hot-swappable I/O device that plugs into a gigabit Ethernet slot and linking it with the fiber-optic network. Module supports data networking applications and offers data transfer rate of 1 Gb/s..1 x LC 1000Base-BX.0.3"(H) x 0.5"(W) x 2.2"(D).Cisco ME 2400, Catalyst 2960 series, Cisco ME 3400, Catalyst 3560 series, Catalyst 3750 series, Catalyst 4500 series, Catalyst 4900 series, Catalyst 6500 series.Wired.Connectivity media: G.652 microm single-mode optical fiber.Form factor: Hot-swappable.Management: Digital optical monitoring (DOM) functions, Application/usage: Data networking.Data transfer rate: 1 Gbps gigabit ethernet.Operating transmission range: Up to 10 km.Small form-factor pluggable (SFP) gigabit interface converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet-port or slot, linking the-port with the network.1490-nm TX/1310-nm RX wavelength.Warranty: 90 days limited.Cisco™ Downstream SFP module has the ability to go up to 10 km over G.652 microm single-mode optical fiber and features digital optical monitoring functions.

The Cisco™ GLC-TE= Gigabit Ethernet SFP transceiver module is suitable for 7700 F3-series, 9372PX and 9396PX Cisco Nexus series switches. This SFP transceiver module has RJ-45 1000Base-T network LAN ports for connectivity. It supports twisted pair media for reliable data transfer..SFP transceiver module for 7700 F3-series, 9372PX and 9396PX Cisco Nexus series switches.Color: Silver.Connectors: One RJ-45 1000Base-T network LAN.Media type supported: Twisted pair.Ethernet technology: Gigabit Ethernet

Cisco 32Gbps fiber channel SFP+ transceiver provides fiber channel connectivity for 8/16/32-Gbps ports on the MDS 9000 family platform. Cisco fiber channel shortwave SFP+ offers 8/16/32-Gbps autosensing fiber channel connectivity..32Gbps shortwave fiber channel SFP+ transceiver provides fiber channel connectivity for 8/16/32Gbps ports on the MDS 9000 family platform.Dimensions: 0.33"H x 2.22"W x 0.53"D.Comes in silver.Wavelength: 850nm.Fiber type: MMF

The cisco 10GBASE SFP+ modules offer customers a wide variety of 10 gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications..Compatibility: Cisco 10GBASE SFP+ modules.Smallest 10G form factor.Cable length: 3 m.Temperature: 32 - 158 deg F commercial.Supports digital optical monitoring capability.Bail latch color: Orange.Supports the cisco quality identification (ID) feature that enables a Cisco switch to identify whether the module is certified and tested by Cisco.Cable type: Twinax cable, passive, 24 AWG cable assembly.Provides flexibility of interface choice.90 days limited warranty.Orange SFP+ network cable 3M, passive twinax cables offer a highly cost-effective way to connect within racks and across adjacent racks.

It installs in a Mini-GBIC compliant slot and features a duplex LC connector that is compatible with 850nm multi-mode fiber cables..Type of Product/Use: Transceiver.Dimensions/Size: 2.2 x 0.5 x 0.3 inch.True color: Silver.850nm Wavelength for Multi-Mode Fiber.Connectivity media: 62.5/125 microm multi-mode optical fiber, 50/125 microm multi-mode optical fiber.Max transfer distance: 721.78 ft 62.5/125 microm, 902.23 ft 62.5/125 microm, 1640.42 ft 50/125 microm, 1804.46 ft 50/125 microm optical fiber.Data transfer rate: 1 Gbps gigabit-ethernet.Transmitter spec: Power: -9.5 to -4 dBm, Receiver spec: sensitivity: -20 to -17dBm, Input power: -20 to -17 dBm.Stress sensitivity: 50/125 um: -13.5 dBm, 62.5/125 um: -12.5 dBm, Wavelength: 850 nm (850nm TYP., 830-860nm) MMF.Environmental condition: Operating temperature: 32 - 104 deg F, Storage temperature: -4 -158 deg F Operating humidity: 0% to 85% non-condensing.Modular bandwidth for MMF: 62.5/125um MMF at 160 MHz/km, up to 220m, 62.5/125um MMF at 200 MHz/km, up to 275m, 50/125um MMF at 400 MHz/km, up to 500m, 50/125um MMF at 500 MHz/km, up to 550m.Provides a simple way to add Gigabit functionality to your Linksys switch.Gigabit fiber is often-used to connect two switches together.Technology used depends on the distance between the two switches.SX module uses 850 nanometer wavelength light in multimode fiber-optic cables, and can achieve distances up to 220 or 550 meters, depending on the fiber used.The Gigabit Ethernet SX Mini-GBIC SFP Transceiver from Cisco is an expansion module that adds high-density fiber connectivity to compatible devices.

It installs in a Mini-GBIC compliant slot and features a duplex LC connector that is compatible with 850nm multi-mode fiber cables..Type of Product/Use: Transceiver.Dimensions/Size: 2.2 x 0.5 x 0.3 inch.True color: Silver.850nm Wavelength for Multi-Mode Fiber.The Gigabit Ethernet SX Mini-GBIC SFP Transceiver from Cisco is an expansion module that adds high-density fiber connectivity to compatible devices.

The Cisco® 40GBase-SR4 QSFP+ wired transceiver module offers links up to 492' long via multi-mode optical fiber at a wavelength of 840 - 860 nm. It supports both twisted-pair and optical fiber media types. This Hot-swappable, plug-in module allows high-bandwidth 40G optical links over 12-fiber parallel fiber terminated with MPO/MTP multifiber connectors..QSFP+ transceiver module for data networking and optical network.Dimensions: 0.5" x 0.7" x 2.9".Interfaces/ports: One MPO/MTP 40GBase-SR4 network.Max transfer distance: 492', Optical wave length: 840 - 860 nm.Media type supported: Optical fiber, Fiber mode supported: Multi-mode.Connectivity technology: Wired.Form factor: Hot-swappable, plug-in module.Power consumption: 1.5 W operational.Temperature: 32 - 158 deg F (operating), -40 - 185 deg F (storage).Meets FCC CFR21 Part 1040, GR-1435-CORE, GR-20-CORE, GR-326-CORE, IEC 60825-1 Class 1, MSA SFF-8431 certifications and standards.Comes with 1 year limited warranty

This Cisco® SFP-10G-SR-S compatible SFP+ transceiver provides 10GBase-SR throughput up to 300m over multi-mode fiber (MMF) at a wavelength of 850nm using a LC connector. It is guaranteed to be 100% compatible with the equivalent Cisco® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. All of our transceivers are Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..Cisco SFP-10G-SR-S Compatible.10GBase-SR SFP+ Transceiver.Media Type: MMF - Wavelength: 850nm - Reach: 300m - Connector Type: LC.100% application tested and guaranteed compatible.Limited Lifetime Warranty.Cisco® SFP-10G-SR-S Compatible TAA Compliant 10GBase-SR SFP+ Transceiver (MMF, 850nm, 300m, LC, DOM)

The Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver, and it supports up to 400m link length when uses 4700Mhz KM MMF (OM3). The 10GBase-SR SFP+ module offer customers a wide variety of 10 gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications..Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver.Industry’s smallest 10G form factor for greatest density per chassis.Compatibility: Cisco nexus 5000 series Switches, cisco nexus 7000 series switches.Hot Pluggable.850nm VCSEL transmitter, PIN photo-detector.Maximum link length of 300m on 2000MHz/km MMF.Operating case temperature: 0 to 70 °C.Additional information: Spare product, distance 300 m.Form factor: Plug-in module.Application/usage: Data networking.90 days limited warranty.The Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver. SFP+ transceiver module supports a link length of 26 m on standard fiber distributed data interface (FDDI)-grade multimode fiber (MMF).

The Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver, and it supports up to 400m link length when uses 4700Mhz KM MMF (OM3). The 10GBase-SR SFP+ module offer customers a wide variety of 10 gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications..Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver.Industry’s smallest 10G form factor for greatest density per chassis.Compatibility: Cisco nexus 5000 series Switches, cisco nexus 7000 series switches.Hot Pluggable.850nm VCSEL transmitter, PIN photo-detector.Maximum link length of 300m on 2000MHz/km MMF.Operating case temperature: 0 to 70 °C.Additional information: Spare product, distance 300 m.Form factor: Plug-in module.Application/usage: Data networking.90 days limited warranty.The Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver. SFP+ transceiver module supports a link length of 26 m on standard fiber distributed data interface (FDDI)-grade multimode fiber (MMF).

Cisco 1000BASE-LX SFP (mini-GBIC) Transceiver easy-to-install module that provide a simple way to add fiber connectivity or to add an extra Gigabit Ethernet port to your Cisco Small Business or Cisco Small Business Pro Series switches. The transceiver available for single-mode fiber-optic cabling and can support distance up to 10 kilometers..Type of Product/Use: Transceiver.Dimensions/Size: 0.5 x 0.3 x 2.2 inch.True color: Silver.1000Base-LX.1 x LC Duplex Connector.Single-Mode Fiber (SMF).10 km (6.2 miles) Max..1000 Mbps Transfer Rate.The MGBLX1 SFP Transceiver from Cisco is an easy-to-install module that provides a simple way to add an extra Gigabit Ethernet port to your Cisco Small Business or Cisco Small Business Pro Series switches.

The Cisco 10GBASE-SR module supports link lengths up to 26m on standard Fiber Distributed Data Interface (FDDI) grade multimode fiber (MMF). Using 2000MHz x km of MMF (OM3), it is possible to create link lengths up to 300m, and with 4700MHz x km MMF (OM4), link lengths up to 400m are possible..Multimode fiber optic transceiver with dual LC/PC connector.10GBASE SFP+ module for data center, enterprise wiring closet, and service provider transport applications.Provides data transfer rates up to 10Gbps.Supports link lengths up to 26m on standard FDDI-grade MMF; up to 300m on 2000MHz x km MMF (OM3); and up to 400m on 4700MHz x km MMF (OM4).Power consumption: 1W.Hot-swappable, plugs into an Ethernet SFP+ port.Compliant with the SFP+ MSA SFF-8431 standard.Wavelength: 850nm.Form factor: Hot-swappable.MSA compliant.Commercial temperature: 32 to 158 degrees Fahrenheit.Supports digital optical monitoring capability.Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link.1-year manufacturer limited warranty

Cisco™ 1000BASE-BX10 Upstream SFP module is a hot-swappable input/output device that plugs into a gigabit ethernet port or slot. SFP is compatible with Cisco™ ME 2400, catalyst 2960 series, Cisco™ ME 3400 and catalyst 3560 series..10/100/1000Base-T Gigabit Ethernet.Form factor: Hot-swappable, spare product, 1310-nm TX/1490-nm RX wavelength, operating transmission range up to 10 km.Interfaces: 1 x LC 1000Base-BX.Connectivity media: G.652 micrometer single-mode optical fiber.Management: Digital optical monitoring (DOM) functions.Application/usage: Data networking.Compatibility: Cisco ME 2400, Catalyst 2960 series, Cisco ME 3400, Catalyst 3560 series, Catalyst 3750 series, Catalyst 4500 series, Catalyst 4900 series, Catalyst 6500 series.Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D).Warranty: 90 days limited.Cisco™ 1000BASE-BX10 Upstream SFP module can be used for data networking and has 1 Gb/s data transfer rate.

Industry standard Cisco small form factor pluggable (SFP) gigabit interface converter is a hot-swappable input/output device that plugs into a gigabit Ethernet port or slot, linking the port with the network..Interfaces/ports: 1 x LC duplex 1000Base-LX/LH.Dimensions: 0.3"(H) x 1/2"(W) x 2.2"(D).Compatibility: Cisco IE 3000 series switches, cisco 3200 series rugged routers, cisco MWR 2900 mobile wireless routers.Connectivity technology: Wired.Connectivity media: Single mode fiber 1000Base-LX/LH.Operating temperature: -40 - 185 deg F.Fiber type: SMF/MMF.Cabling type: Ethernet 1000Base-LX.Additional information: Spare product, range: 10 Km, wavelength: 1300 nm.Data transfer rate: 1 Gb/s gigabit Ethernet.Form factor: Hot swappable/plug-in.Application/usage: Data networking.SFP (mini-GBIC) transceiver module 1000 MBPS SFP single mode rugged 1000BASE-LX/LH SFP for MMF and SMF.

With its thicker diameter to carry the light of multiple wavelengths, this multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity..Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Provides high performance and flexible solution with 100 Gigabit Ethernet connectivity.With 100GBase-SR4 technology, get up to 100Gbps data transfer rate over optical fiber cable

Cisco Transceiver module is compatible with Nexus 3000 series, Nexus 6500/7000 series, ASR 9000 series routers. Transceiver module suits MMF, 4-lanes, 850-nm wavelength, 12-fiber MTP/MPO connector..QSFP+ transceiver module is used for data center, high performance computing networks, enterprise core and distribution layers applications.Dimensions: 0.5"H x 0.7"W x 2.9"D.Interface/ports: 1 x MPO 40GBase-SR4 network.Maximum data transfer rate: 40 Gbps.Ethernet technology: 40 Gigabit Ethernet.Media type supported: Optical fiber, fiber mode supported: Multi-mode.Nominal wavelength: 850 nm, core size: 50 micron.Maximum transfer distance: 492', modal bandwidth: 500 MHz/km (OM2), 2000 MHz/km (OM3), 4700 MHz/km (OM4).Transmit power: -1 dBm per lane, receive power: 2.4 dBm.Compatible with Cisco Nexus 3064 switch, Nexus 2248PQ 10GE, ASR 9000 Series, 3016Q, 3064-E, 3064PQ, 3064-X, 6001.Form factor: Hot swappable.RoHS-6, MSA compliant.High-speed electrical interface compliant to IEEE 802.3ba.Cisco Transceiver module offers customers a wide variety of high-density and low-power 40GB Ethernet connectivity options for data center.

The Cisco Quad Small Form-Factor Pluggable (QSFP) portfolio offers customers high-density and low-power Ethernet connectivity for data center, high-performance computing networks, enterprise core and distribution layers, and service provider applications. The Cisco QSFP dual-rate bi-directional (BiDi) transceiver is a pluggable optical transceiver with a duplex LC connector interface for short-reach data communication and interconnect applications using Multi-Mode Fiber (MMF)..Uses multimode fiber (MMF) as the fiber cable type and features a duplex LC optical connector for connectivity..QSFP transceivers enable high-speed 40G/100G Ethernet over multimode fiber using BiDi tech for short-reach data center connectivity..Supports data transfer rates of up to 100,000 Mbps (100 Gbps) and 40,000 Mbps (40 Gbps)..Maximum distance of 100 meters over OM4 or OM5 multimode fiber for 100G Ethernet and 150 meters over OM4 for 40G Ethernet..Supports 40 Gigabit Ethernet (40GbE) and 100 Gigabit Ethernet (100GbE) over multimode fiber using a duplex LC connector..Has a typical power consumption of approximately 3.5 watts..Hot-swappable, allowing it to be inserted or removed from a compatible device without powering down the system..MSA (Multi-Source Agreement) compliant, ensuring interoperability with other QSFP28-compliant devices across various platforms..Operates at two wavelengths: 855 nm and 908 nm, using short-range bidirectional optics over multimode fiber.

Cisco™ BiDi Short-reach transceiver module with LC duplex 40GBase-X interface operates with 50 micrometer multi-mode optical fiber. Hot-swappable transceiver module with LC connectors can be used for data networking/optical network applications..Interfaces/ports: 1 x LC duplex 40GBase-X.Media & performance: 50 micrometer multi-mode optical fiber 40GBase-X.Ethernet technology: Gigabit Ethernet.Form factor: Hot-swappable.Data transfer rate: 40 Gbps.Connector: LC.Dimensions: 0.5"(H) x 0.7"(W) x 2.9"(D).Wavelength: 832 - 918 nm.Distance supported: 100/150 m.Compatibility: Cisco Nexus 9000 series switches.Power: 5 dBm transmit, 5 dBm receive, Power consumption: 3.5 W.Application/usage: Data networking, optical network.Gray.Operating temperature: -10 - +70 deg C.Certifications and standards:: RoHS-6, Green compliant.Warranty: 90 days limited.Cisco™ BiDi Short-reach transceiver module with LC duplex 40GBase-X interface transfers data at the rate of 40 Gb/s and is compatible with Cisco Nexus 9000 series switches.

The Cisco 100GBASE QSFP (Quad Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 100 Gigabit Ethernet connectivity options for data center, high-performance computing networks, enterprise core and distribution layers, and service provider applications. The QSFP-100G modules are our new generation of 100G transceiver modules solution based on QSFP form factor..With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance.100 Gigabit Ethernet - High bandwidth performance, ease of use and reliable connectivity.With 100GBase-LR4 technology, get up to 100Gbps data transfer rate over optical fiber cable