Cisco WiFi 6 Access Point
7 results
The Cisco Catalyst access points are the next generation of enterprise access points. They are resilient, secure, and intelligent. We are more dependent on our wireless networks than ever before. Additional devices connect to the network every year, and the Cisco Catalyst access points will provide a seamless experience anywhere for everyone. Going beyond the Wi-Fi 6 (802.11ax) standard, the access point provides integrated security, resiliency, and operational flexibility as well as increased network intelligence. Extending intent-based network and perfect for networks of all sizes, the Cisco Catalyst scales to the growing demands of IoT while fully supporting the latest innovations and new technologies and is a leader in performance, security, and analytics. The Cisco Catalyst access points, paired with Cisco DNA, are enterprise-class products that will address your current and future needs. These access points are the first step in updating your network so that you can take better advantage of all of the features and benefits that Wi-Fi 6 provides..Access point for indoor environments, with internal antennas provides a seamless experience anywhere for everyone.Dimensions: 8.5"H x 8.5"W x 1.7"D.Comes in white.Wi-Fi 6 (802.11ax) delivers a better experience in typical environments with more predictable performance for advanced applications such as 4K or 8K video, high-density, high-definition collaboration apps, all-wireless offices, and IoT.Features software-defined radio (SDR) that can perform advanced RF spectrum analysis and delivers other features, such as Cisco CleanAir, wireless intrusion prevention system (wIPS), and DFS detection.Orthogonal frequency-division multiple access (OFDMA) based scheduling splits the bandwidth into smaller chunks called resource units (RUs), which can be allocated to individual clients in both the downlink and uplink directions to reduce overhead and latency.Supporting four spatial streams, multi-user, multiple-input, multiple-output (MU-MIMO) enables access points to split spatial streams between client devices, to maximize throughput.Spatial reuse allows the access points and their clients to differentiate between BSSs, thus permitting more simultaneous transmissions.Target wake time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the access point.Intelligent Capture probes the network and provides Cisco DNA Center with deep analysis.Flexible radio assignment allows the access points to intelligently determine the operating mode of serving radios based on the RF environment.Dual 5GHz radio support enables both radios to operate in 5GHz client serving mode, allowing industry-leading 5.2Gbps (2 x 2.6Gbps) over-the-air speeds while increasing client capacity.Application hosting helps future-proof and simplify IoT deployments by eliminating the need to install and manage overlay networks.Provides uplink speeds of 2.5Gbps, in addition to 100Mbps and 1Gbps.Features Integrated Bluetooth Low Energy (BLE) 5 radio to enable IoT use cases such as location tracking and wayfinding.Enables edge computing capabilities for IoT applications on the host access point.Creates an optimal mobile experience for iOS devices on corporate networks based on Cisco technologies.Lifetime manufacturer limited warranty
Extending Cisco's intent-based network and perfect for networks of all sizes, the Catalyst 9105 Access Points scale to meet the growing demands of IoT while fully supporting the latest innovations and new technologies. The Catalyst 9105 Access Points provide a seamless experience anywhere for everyone, with high scaling and unmatched performance in diverse network deployments. Going beyond the Wi-Fi 6 (802.11 ax) standard, the Catalyst 9105 Access Points provides integrated security, resiliency, and operational flexibility as well as increased network intelligence..Enterprise grade versatile wireless access point perfect for networks of all sizes.Features data rates up to 1.488 Gbps.Equipped with one 10/100/1000 Base-T (Ethernet) Uplink Interface and one RJ-45 management console port.Dimensions: 1.18"H x 5.9"W x 5.9"D.Wi-Fi 6 (802.11ax) designed to use both the 2.4-GHz and 5-GHz bands.OFDMA-based scheduling splits the bandwidth into smaller frequency allocations called Resource Units (RUs), which can be assigned to individual clients in both the downlink and uplink directions to reduce overhead and latency.Supporting two spatial streams, MU-MIMO enables access points to split spatial streams between client devices to maximize throughput.Spatial reuse (also known as Basic Service Set [BSS] coloring) allows the access points and their clients to differentiate between BSSs, thus permitting more simultaneous transmissions.A new power-saving mode called Target Wake Time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the access point.Intelligent Capture probes the network and provides Cisco DNA Center with deep analysis.Application Hosting on Catalyst 9100 Access Points helps future-proof and simplify IoT deployments by eliminating the need to install and manage overlay networks.Integrated Bluetooth Low Energy (BLE) 5 radio enables location-based use cases such as asset tracking, way finding or analytics.Container support enables edge computing capabilities for IoT applications on the host access point.Lifetime manufacturer limited warranty
Perfect for smaller networks, the Cisco Business 150AX access point brings a full slate of Cisco high-performance functionality to the business environment at an affordable price point. The Cisco Business 150AX access point delivers industry-leading wireless performance with support for the latest Wi-Fi 6 standard, IEEE's 802.11ax. It also meets the growing flexibility of wireless networks by introducing mesh technology which enables scalable expansion of the network where network cabling may not exist, all while delivering a simple user experience, deployable with the Cisco Business Mobile app or the integrated WebUI. The 150AX access point extends coverage and capacity to Wi-Fi clients such as smartphones, tablets, and high-performance laptops that have integrated Wi-Fi 6 capabilities, while being backward compatible with the previous 802.11ac Wave 1 or Wave 2 standards..Perfect for smaller networks, this dual-band access point brings a full slate of high-performance functionality to the business environment at an affordable price point.Provides up to 1480Mbps with the AX standard.Wi-Fi 6 delivers a better experience in typical environments with more predictable performance for advanced applications such as 4K or 8K video, high-density or high-definition collaboration apps.Integrated Bluetooth Low Energy (BLE) 5 radio (for future use).Contains 1 x Gigabit Ethernet (10/100/1000BASE-T auto-sensing) port.Includes a mounting bracket and hardware.Powered by a passive Power over Ethernet injector.Integrated antenna: 2.4GHz (peak gain 4dBi, internal antenna, omnidirectional in azimuth), 5GHz (peak gain 5dBi, internal antenna, omnidirectional in azimuth).Meets or exceeds the UL 60950-1, CAN/CSA-C22.2 No. 60950-1, IEC 60950-1, EN 60950-1, IEC 62368-1, EN 62368-1, UL/CUL 62368-1, FCC Part 15.247, 15.407, RSS-247, EN 300328, EN 301893, EN 50385, ARIB-STD 66, ARIB-STD T71, EMI, FCC Part 15B, ICES-003, VCCI(Japan), EN 301489-1 and -17, EN 55032, EN55035 standards.Supporting two spatial streams, MU-MIMO enables the access point to split spatial streams between client devices to maximize throughput.Easily deploy and manage without a physical controller or licensing, using your favorite web browser with the integrated WebUI or using your mobile device with the Cisco Business Mobile app.Easily enhance your wireless coverage and capacity without network cabling and Ethernet switches, mix and match Cisco Business Wi-Fi 6 Mesh Extenders and/or Access Points to extend seamless Wi-Fi coverage throughout your business or workplace.Flexible deployment models supporting multiple concurrent use cases required by small businesses, including point of sale systems, surveillance cameras, secure guest access, and more.Offers a cloud-based security service to protect your business and connected wireless users, devices, and guests.Designed with flexible mounting options in mind; you can mount it directly on the ceiling (primary orientation) or vertically on a wall (secondary orientation).OFDMA based scheduling splits the bandwidth into smaller frequency allocations called Resource Units (RU), which can be assigned to individual clients in both the downlink and uplink directions to reduce overhead and latency.Provides maximum number of associated wireless clients: 200 per Wi-Fi radio, for a total of 400 clients per access point, or 1000 in a system.3-year manufacturer limited warranty
The Cisco Catalyst 9115 series with Wi-Fi 6 is the next generation of enterprise access points. They are resilient, secure, and intelligent. The Catalyst 9115 series access points, paired with the Cisco Digital Network Architecture (Cisco DNA), are enterprise-class products that will address both your current and future needs. They are the first step in updating your network to take better advantage of all of the features and benefits that Wi-Fi 6 provides. With the Catalyst 9115 series, you can secure remote workers or the micro-office. Any Cisco Aironet or Catalyst access point can function as an OfficeExtend access point (OEAP). With an OEAP, an employee at home or in a temporary micro-office will have access to the corporate SSID and the corporate network without the need to set up a VPN or have any advanced technical know-how..Access point with internal antennas for indoor environments.Management console port (RJ45); 1 x 100, 1000, 2500 Multigigabit Ethernet (RJ45): IEEE 802.3bz; USB 2.0 (enabled via future software).Dimensions: 1.7"H x 8"W x 8"D.Integrated antenna: 2.4GHz, 3dBi peak gain, internal antenna, omnidirectional in azimuth; 5GHz, 4dBi peak gain, internal antenna, omnidirectional in azimuth.IEEE 802.11ax emerging standard, also known as High-Efficiency Wireless (HEW) or Wi-Fi 6, builds on 802.11ac.OFDMA-based scheduling splits the bandwidth into smaller chunks called Resource Units (RUs), which can be allocated to individual clients in both the downlink and uplink directions to reduce overhead and latency.New power-saving mode called Target Wake Time (TWT) allows the client to stay asleep and wake up only at prescheduled (target) times to exchange data with the AP.Integrated Bluetooth Low Energy (BLE) 5.0 radio to enable IoT use cases such as location tracking and wayfinding.Lifetime manufacturer limited warranty
The Cisco Catalyst 9130AX series access points are the next generation of enterprise access points. They are resilient, secure, and intelligent. With the emergence of high-density networks and the Internet of Things (IoT), we are more dependent on wireless networks than ever before. Increasing numbers of devices connect to the network every year, ranging from high-performance client devices to low-bandwidth IoT devices. Cisco Catalyst 9130AX series access points provide a seamless experience anywhere for everyone, with high scaling and unmatched performance in diverse network deployments. Going beyond the Wi-Fi 6 (802.11ax) standard, the 9130AX series provides integrated security, resiliency, and operational flexibility as well as increased network intelligence. Extending Cisco's intent-based network and perfect for networks of all sizes, the Cisco Catalyst 9130AX Series scales to meet the growing demands of IoT while fully supporting the latest innovations and new technologies. The 9130AX series is also a leader in performance, security, and analytics. The Cisco Catalyst 9130AX series access points, paired with the Cisco Digital Network Architecture (Cisco DNA), are enterprise-class products that will address both your current and future needs. They are the first step in updating your network to take better advantage of all of the features and benefits that Wi-Fi 6 provides..This access point provides integrated security, resiliency, and operational flexibility as well as increased network intelligence.Provides up to 5.38Gbps (8x8 80MHz or dual 4x4 80+80MHz on 5GHz and 4x4 20MHz on 2.4GHz).Contains 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ45): IEEE 802.3az, management console port (RJ45), and USB 2.0 at 4.5W (enabled via future software).Dimensions: 1.88"H x 8.9"W x 8.9"D.Meets or exceeds IEC, EN, UL, CAN/CSA, AS/NZS, ICES, VCCI-CISPR, RSS standards.Delivers a better experience in typical environments with more predictable performance for advanced applications such as 4K or 8K video, high-density, high-definition collaboration apps, all-wireless offices, and IoT.The Cisco RF Application-Specific Integrated Circuit (ASIC) is a fully integrated Software-Defined Radio (SDR) that can perform advanced RF spectrum analysis and delivers features such as Cisco CleanAir, Wireless Intrusion Prevention System (WIPS), FastLocate, and Dynamic Frequency Selection (DFS) detection.Orthogonal Frequency-Division Multiple Access (OFDMA)-based scheduling splits the bandwidth into smaller frequency allocations called Resource Units (RUs), which can be assigned to individual clients in both the downlink and uplink directions to reduce overhead and latency.Supporting eight spatial streams, Multiuser Multiple Input, Multiple Output (MU-MIMO) enables access points to split spatial streams between client devices to maximize throughput.Power-saving mode called Target Wake Time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the access point.Comes in white.Lifetime manufacturer limited warranty
The Cisco Catalyst 9120AX series access points are resilient, secure, and intelligent. We are more dependent on our wireless networks than ever before. Additional devices connect to the network every year, and the Cisco Catalyst 9120AX series access points will provide a seamless experience anywhere for everyone. Going beyond the Wi-Fi 6 (802.11ax) standard, the 9120AX series provides integrated security, resiliency, and operational flexibility as well as increased network intelligence. Extending Cisco's intent-based network and perfect for networks of all sizes, the Cisco Catalyst 9120AX series scales to the growing demands of IoT while fully supporting the latest innovations and new technologies. Not only that, but the 9120AX series is a leader in performance, security, and analytics. The Cisco Catalyst 9120AX series access points, paired with Cisco DNA, are enterprise-class products that will address your current and future needs. These access points are the first step in updating your network so that you can take better advantage of all of the features and benefits that Wi-Fi 6 provides..Wireless dual-band (2.4GHz, 5GHz) indoor access point intended for enterprises that need more wireless capacity and/or wider channels.AX dual-band access point.One port with PoE support.Wi-Fi 6 certification supports all mandatory 802.11ax features that include MIMO, OFDMA, TWT, and more.Contains a two 2.5 Gigabit Ethernet uplink port with PoE-in support (802.3at), USB 2.0 @ 4.5W host interface, Auto-MDIX, and management console port (RJ-45).Power over Ethernet (PoE): 802.3at.Dual radio for simultaneous dual-band operation (5GHz and 2.4GHz, 802.11ax, 4 x 4 MIMO).Meets or exceeds the UL2043,EN 55032 (rev. 2015), EN 301 489-17 (v3.1.1 2017-02), UL 60950-1, and EN 301 893 (v2.1.1) standards.Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors.Compact multi-RF connector with DART interface.Cisco Catalyst 9120AXE access points are certified for use with antenna gains up to 6dBi (2.4GHz and 5GHz).Safeguard sensitive data with WPA2/WPA3 and Enhanced Open.Cisco DNA software support.Lifetime manufacturer limited warranty
The Cisco Catalyst 9124AX Series outdoor access points are next-generation Wi-Fi 6 access points encased in a rugged and robust design that service providers and enterprises can easily deploy. With the emergence of high-density networks and the Internet of Things (IoT), we are more dependent on wireless networks than ever before. An increasing number of devices connect to the network every year, ranging from high-performance client devices to low-bandwidth IoT devices. The Cisco Catalyst 9124AX Series outdoor access points provide a seamless experience, with high scaling and unmatched performance in diverse network deployments. Going beyond the Wi-Fi 6 (802.11ax) standard, the Catalyst 9124AX Series provides integrated security, resiliency, and operational flexibility as well as increased network intelligence. The Catalyst 9124AX Series offers flexible deployment options for service providers and enterprise networks that need the fastest links possible for mobile, outdoor clients (smartphones, tablets, and laptops), and wireless backhaul. With options for internal or external antennas, the 9124AX Series gives network operators the flexibility to balance their desired wireless coverage with their need for easy deployment. The Catalyst 9124AX Series access points, paired with the Cisco Digital Network Architecture (Cisco DNA), are enterprise-class products that will address both your current and future needs. They are the first step in updating your network to take better advantage of all of the features and benefits that Wi-Fi 6 provides..Wireless dual-band (2.4GHz, 5GHz) outdoor access point intended for enterprises that need more wireless capacity and/or wider channels.AX dual-band access point.One port with PoE support.Wi-Fi 6 certification supports all mandatory 802.11ax features that include MIMO, OFDMA, TWT, and more.Contains a one 2.5 Gigabit Ethernet uplink port with PoE-in support (802.3bt), and one Gigabit Ethernet SFP ports.Power over Ethernet (PoE): 802.3bt or DC power.Dual radio for simultaneous dual-band operation (5GHz and 2.4GHz, 802.11ax, 4 x 4 MU-MIMO).Meets or exceeds the IP66/IP67 IEC 60529 Ingress Rating, MIL-STD-810F, NEMA 250-2008, EN 60068-2-5, MIL-STD-810E, Method 514.4 standards.One status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors.Safeguard sensitive data with WPA2/WPA3 and Enhanced Open.Cisco DNA software support.Lifetime manufacturer limited warranty
You May Also Like
This kit includes five dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 1167 Mb/s over the 2.4 GHz and 5 GHz frequencies. The 140AC's Gigabit Ethernet port supports passive 802.3af power over Ethernet (PoE), allowing you to transfer both data and power over a single cable when connected to compatible devices. Alternatively, you can power the device with a separately purchased PoE injector..Type of Product/Use: Dual-Band Wireless Access Point.Adapter Speed: 1167 Mbps.Number of ports and Type: 1 Gigabit Ethernet (RJ45) (Uplink) PoE, 1 Ethernet (RJ45) (Console).Dimensions as H 1.3 x W 5.9 x D 5.9 in inches.Installation Info: Wall & Ceiling Mountable.Power Rating/Voltage: 8 W.Supported Protocols: MAC Filtering, RADIUS.Warranty: Limited Lifetime.Enhance your business with fast and reliable Wi-Fi connections by connecting the Cisco Business 140AC Dual-Band Wireless Access Point to your compatible network router or switch.
This kit includes three dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 1167 Mb/s over the 2.4 GHz and 5 GHz frequencies. The 140AC's Gigabit Ethernet port supports passive 802.3af power over Ethernet (PoE), allowing you to transfer both data and power over a single cable when connected to compatible devices. Alternatively, you can power the device with a separately purchased PoE injector..Type of Product/Use: Dual-Band Wireless Access Point.Adapter Speed: 1167 Mbps.Number of ports and Type: 1 Gigabit Ethernet (RJ45) (Uplink) PoE, 1 Ethernet (RJ45) (Console).Dimensions as H 1.3 x W 5.9 x D 5.9 in inches.Installation Info: Wall & Ceiling Mountable.Power Rating/Voltage: 8 W.Supported Protocols: MAC Filtering, RADIUS.Warranty: Limited Lifetime.Enhance your business with fast and reliable Wi-Fi connections by connecting the Cisco Business 140AC Dual-Band Wireless Access Point to your compatible network router or switch.
This kit includes dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 1167 Mb/s over the 2.4 GHz and 5 GHz frequencies. The 140AC's Gigabit Ethernet port supports passive 802.3af power over Ethernet (PoE), allowing you to transfer both data and power over a single cable when connected to compatible devices. Alternatively, you can power the device with a separately purchased PoE injector..Type of Product/Use: Dual-Band Wireless Access Point.Adapter Speed: 1167 Mbps.Number of ports and Type: 1 Gigabit Ethernet (RJ45) (Uplink) PoE, 1 Ethernet (RJ45) (Console).Dimensions as H 1.3 x W 5.9 x D 5.9 in inches.Installation Info: Wall & Ceiling Mountable.Power Rating/Voltage: 8 W.Supported Protocols: MAC Filtering, RADIUS.Warranty: Limited Lifetime.Enhance your business with fast and reliable Wi-Fi connections by connecting the Cisco Business 140AC Dual-Band Wireless Access Point to your compatible network router or switch.
WatchGuard's AP 130 is an ideal Wi-Fi 6 solution to support low-density indoor environments like a small office or remote workers with a secure WPA3 encryption. Integrated security is delivered by supporting the 802.11 standard and WPA3 encryption to enhance the Wi-Fi experience. Includes Wi-Fi 6 2x2 radio with four internal antennas. Maximum TX power delivers 22 dBm and a 3dBi antenna gain with one Ethernet port supporting up to 1 Gbps. Maximum data rate includes a crystal clear and seamless wireless experience supporting 1.2 Gbps on the 5 GHz band and 574 Mbps available on the 2.4 GHz band. WatchGuard’s AP130, AP330, AP430CR, and AP432 requires an active Management License. Select from a Standard or USP Management License to activate and access WatchGuard Cloud. The Management License is required to activate and manage the WatchGuard access points..This Dual-Band (2.4 GHz and 5 GHz) Device is designed for low-density indoor environments such as small offices or for remote workers..The WatchGuard AP130 supports the Wi-Fi 6 (802.11ax) standard Here are the maximum data transfer rates 2.4 GHz Band Up to 574 Mbps (0.574 Gbps) 5 GHz Band: Up to 1200 Mbps (1.2 Gbps).The WatchGuard AP130 supports PoE (Power over Ethernet): 54V DC 802.3at (PoE+)12. WiFi Standard: Wi-Fi 6 (802.11ax).Supports high-efficiency wireless connectivity with WPA3 encryption..Connector, Port or Interface Types are 1 x 1 Gbps Ethernet port (PoE+), 1 x USB port (currently not in use), 1 x RJ45 serial console port..Included Components AP130 Access Point Unit, Ceiling Mount T-Rail Brackets, Wall Mount Screws and Spacers, Quick Start Guide.Power source of 54V DC 802.3at (PoE+).Device supports these Frequencies 2.4 GHz and 5 GHz bands..Complies with the Restriction of Hazardous Substances (RoHS) directive, ensuring the product is free from specific hazardous materials and environmentally friendly..The WatchGuard AP130 comes with a standard 1-year hardware warranty.
The WatchGuard AP332CR is designed for medium-density deployments and is IP67-rated to enable use in outdoor and rugged environments. This dual-band access point delivers fast, reliable coverage with a 2x2 radio and four external, omnidirectional antennas offering up to 1.2 Gbps on the 5 GHz band. A single PoE+ port is included to support data rates up to 2.5 Gbps. Utilizing WatchGuard Cloud for deployment and configuration, the AP332CR offers a seamless experience with Wi-Fi 6 performance and WPA3 encryption ? making it ideal for building easily scalable networks across school campuses, public hotspots, and smaller manufacturing environments..Dual-band (2.4 GHz and 5 GHz) for outdoor/rugged environments..Wi-Fi 6 (802.11ax) with up to 2.4 Gbps (5 GHz) and 574 Mbps (2.4 GHz)..One PoE+ port supporting up to 2.5 Gbps, Wi-Fi 6 standard..Provides MU-MIMO for efficient, multiple device connectivity..Interfaces/Ports Ethernet Technology 2.5 Gigabit Ethernet Number of Network (RJ-45) Ports 1 PoE PD Port.Package Contents AP332CR Outdoor/Rugged Access Point 4 x Omnidirectional External Antennas.Powered via PoE or optional DC power input..Operates on 2.4 GHz and 5 GHz bands for wide coverage..IP67-rated for dust and water resistance, compliant with FCC, CE, and RoHS..Comes with a 1-year limited warranty.One PoE+ port supporting up to 2.5 Gbps
Enhance your small-to-midsize business with fast and reliable Wi-Fi connections by connecting the Cisco Business 240AC Dual-Band Wireless Access Point to your compatible network router or switch. This kit includes three dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 2333 Mb/s over the 2.4 GHz and 5 GHz frequencies. Both of the 240AC's Gigabit Ethernet ports support 802.3af/at power over Ethernet, allowing you to transfer both data and power over a single cable, which can be passed through to IP cameras and other devices when connected to a compatible switch..Dual-Band Wireless Access Point.Wi-Fi 5 (802.11ac) Wave 2.Up to 2333 Mb/s Throughput.2.4 GHz / 5 GHz (Dual-Band).Internal Omnidirectional Antennas.2 x Gigabit Ethernet PoE Ports.4x4 MIMO.Wall & Ceiling Mountable.Works with Cisco Business Mobile App.Warranty Limited Lifetime
The AP 330 is WatchGuard's all-purpose Wi-Fi 6 access point and is the ideal choice for mid-density indoor environments of all sizes to utilize the most secure WPA3 encryption for a seamless experience. Includes 2x2 radio scanning optimized for Wi-Fi 6 with six internal antennas. Maximum TX power delivers 22 dBm and a 2dBi antenna gain with one Ethernet port supporting up to 2.5 Gbps. These Wi-Fi 6 access points deliver a maximum data rate for a seamless wireless experience by supporting up to 1.2 Gbps on the 5 GHz band and 574 Mbps available on the 2.4 GHz band. WatchGuard’s AP130, AP330, AP430CR, and AP432 requires an active Management License. Select from a Standard or USP Management License to activate and access WatchGuard Cloud. The Management License is required to activate and manage the WatchGuard access points..The WatchGuard AP330 operates on dual bands: the 2.4 GHz and 5 GHz frequencies. It is designed for medium-density indoor environments, such as offices, schools, and retail spaces, providing reliable and high-efficiency Wi-Fi 6 connectivity..It supports the Wi-Fi 6 (802.11ax), standard up to 1.2 Gbps on the 5 GHz band and 0.574 Gbps on the 2.4 GHz band..The WatchGuard AP330 supports PoE (Power over Ethernet) 54V DC 802.3at (PoE+).Supports high-efficiency wireless connectivity with WPA3 encryption..Connector, Port or Interface Types are 1 x 2.5 Gbps Ethernet port (PoE+), 1 x USB port (currently not in use), 1 x RJ45 serial console port..Included Components are Access point unit, mounting hardware, quick start guide..Power Source PoE 54V DC 802.3at..This device have Frequencies of 2.4 GHz and 5 GHz bands..Its has The Restriction of Hazardous Substances (RoHS) is a standard..The WatchGuard AP330 comes with a standard 1-year warranty
Ideal for small and medium-sized networks, the Cisco Business 240AC Access Point delivers industry-leading performance for enterprise-class 4x4 Multi-user Multiple-Input Multiple-Output (MU-MIMO), four spatial stream access points that support the Institute of Electrical and Electronic Engineers (IEEE) 802.11ac Wave 2 standard. The Cisco Business 240AC Access Point extends support to a new generation of Wi-Fi clients, such as smartphones, tablets, and high-performance laptops that have integrated 802.11ac Wave 1 or Wave 2 support..Type of Product/Use: Dual-Band Wireless Access Point.Adapter Speed: 1733 Mbps.Number of ports and Type: 2 Gigabit Ethernet (RJ45) (Uplink) PoE, 1 Ethernet (RJ45) (Console).Dimensions as H 1.5 x W 7 x D 7 in inches.Installation Info: Wall & Ceiling Mountable.Power Rating/Voltage: 13.2 W.Supported Protocols: MAC Filtering, RADIUS.Warranty: Limited Lifetime.The Cisco Business 240AC Access Point delivers an ideal blend of predictable performance in a compact form.
This kit includes five dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 2333 Mb/s over the 2.4 GHz and 5 GHz frequencies. Both of the 240AC's Gigabit Ethernet ports support 802.3af/at power over Ethernet, allowing you to transfer both data and power over a single cable, which can be passed through to IP cameras and other devices when connected to a compatible switch. Alternatively, you can power the access point with a separately purchased PoE injector..Type of Product/Use: Dual-Band Wireless Access Point.Adapter Speed: 1733 Mbps.Number of ports and Type: 2 Gigabit Ethernet (RJ45) (Uplink) PoE, 1 Ethernet (RJ45) (Console).Dimensions as H 1.5 x W 7 x D 7 in inches.Installation Info: Wall & Ceiling Mountable.Power Rating/Voltage: 13.2 W.Supported Protocols: MAC Filtering, RADIUS.Warranty: Limited Lifetime.Enhance your small-to-midsize business with fast and reliable Wi-Fi connections by connecting the Cisco Business 240AC Dual-Band Wireless Access Point to your compatible network router or switch.
The AP 430 CR is perfect for high-density deployments that include an industrial-rated IP67 enclosure, designed for either indoor or rugged outdoor deployment with superior Wi-Fi 6 performance and secure WPA3 encryption. Includes six external antennas to deliver a maximum TX power of 23dBm. One ethernet port is included to support up to 5 Gbps and includes one gigabit PoE+ port. Lightning-fast speed crafts an unwavering connectivity executed through a total of 2402 Mbps the 5 GHz band and 574 Mbps delivered on the 2.4 GHz band. Integrated 4x4 radio chains and streams to deliver a secure and seamless network experience. WatchGuard's AP130, AP330, AP430CR, and AP432 requires an active Management License. Select from a Standard or USP Management License to activate and access WatchGuard Cloud. The Management License is required to activate and manage the WatchGuard access points. Requires 6 external antennas (WG9004) sold separately..Dual-band (2.4 GHz and 5 GHz) designed for outdoor use in harsh environments..Max Data rate up to 574 Mbps available on the 2.4 GHz band, Max Data rate up to 2.3 Gbps on the 5 GHz band.Supports PoE (802.3at) and Wi-Fi 6 standard..Offers MU-MIMO for efficient multiple device connectivity..1-GbE-RJ45 Ports 1x 5-GbE-RJ45 Ports 1x PoE Powered Device (PD) PoE-PD Ports.Package Contents AP430CR Outdoor Access Point Wall Mount Plate Pole Mount Clamp.Powered via PoE or optional DC power adapter..Operates on 2.4 GHz and 5 GHz frequencies with enhanced range..IP67-rated for dust and water resistance, compliant with FCC, CE, and RoHS..Comes with a 1-year limited hardware warranty.Support for up to eight individual SSIDs per radio allows for maximum flexibility in network design.Lightning-fast speed crafts an unwavering connectivity experience executed by 2402 Mbps on the 5 GHz band and 574 Mbps delivered on the 2.4 GHz band
Weatherproof and temperature hardened, Aruba 570 Series access points deliver the highest Wi-Fi 6 performance in outdoor and environmentally challenging locations. The high-performance and high power 570 Series APs deliver maximum capacity and range. It delivers 4x4:4SS MU-MIMO capability, Aruba's advanced ClientMatch and integrated Bluetooth to enable Aruba location services..Wireless dual-band (2.4GHz, 5GHz) outdoor access point designed for the highest levels of performance and greater deployment flexibility.Features Wi-Fi 6 standard with a combined peak data rate of up to 4.8Gbps.Include an integrated Bluetooth 5 and 802.15.4 radio (for Zigbee support) to simplify deploying and managing IoT-based location services, asset tracking services, security solutions and IoT sensors.Features 1 x 1000Base-T - RJ-45, 1 x console - USB-C, 1 x HPE Smart Rate - RJ-45.AP supports Power over Ethernet (on ports E0 and/or E1).Supported frequency bands: 2.400 to 2.4835 GHz (ISM); 5.150 to 5.250 GHz (U-NII-1); 5.250 to 5.350 GHz (U-NII-2A); 5.470 to 5.725 GHz (U-NII-2C); 5.725 to 5.850 GHz (U-NII-3/ISM); 5.850 to 5.875 GHz (U-NII-4).TAA-compliant.Features include Uplink and Downlink Orthogonal Frequency Division Multiple Access (OFDMA), Downlink Multi-User MIMO (MU-MIMO), and cellular co-location.The ACC feature uses built in filtering to automatically minimize the impact of interference of high power cellular base stations, in building distributed antenna systems as well as small cell and femtocell equipment.With the introduction of WPA3 and Enhanced Open, a Wi-Fi 6 certified client will never send unencrypted traffic over the air.AP provides connectivity for a maximum of 512 associated clients per radio (1024 in total).Available management choices include Aruba Central (cloud-based) or Aruba AirWave (multivendor, on premises) solutions.Withstands harsh outdoor weather conditions, providing fast speed, high density, and reliable connectivity outdoors in large open areas, such as stadiums and parking lots.Lifetime manufacturer limited warranty
WatchGuard’s high-performance Wi-Fi 6 access point is the ideal choice for high-density indoor environments of all shapes and sizes to utilize the most secure WPA3 encryption for a seamless Wi-Fi 6 experience for end users to enjoy.Dual-band (2.4 GHz and 5 GHz) for high-density environments..Wi-Fi 6 (802.11ax) with up to 4.8 Gbps (5 GHz) and 1.148 Gbps (2.4 GHz)..Supports PoE (802.3at) and Wi-Fi 6 standard..Supports MU-MIMO for multiple device connectivity..2.5 Gigabit Ethernet (GbE) port for wired connectivity..Includes access point unit, mounting hardware, and user guide..Powered via PoE or separate power adapter..Operates on 2.4 GHz and 5 GHz frequency bands..Complies with Wi-Fi 6 (802.11ax), FCC, CE, and RoHS certifications..Comes with a 1-year limited warranty.Qualcomm Cypress IPQ8072A Quad-core A53 ARM processor at 2 GHz with 2 GB RAM and 256 MB Flash
Aruba Wi-Fi 6 access points provide high-performance connectivity for any organization experiencing growing numbers of IoT and mobility requirements. With a maximum real-world aggregate data rate of 2.69 Gbps (HE80/HE20), they deliver the speed and reliability needed for any enterprise environment. The 510 Series APs are also designed to optimize user experience by maximizing Wi-Fi efficiency and dramatically reducing airtime contention between clients. Features include Orthogonal frequency-division multiple access (OFDMA), bi-directional multi-user MIMO and cellular optimization. With up to four spatial streams (4SS) and 160MHz channel bandwidth (VHT160), the 510 Series provides groundbreaking wireless capabilities for any enterprise..Access points provide high-performance connectivity for any organization experiencing growing numbers of IoT and mobility requirements.Up to 1.2Gbps wireless data rate on 5GHz and up to 574Mbps on 2.4GHz.Interface: HPE SmartRate port (RJ-45, maximum negotiated speed 2.5Gbps), USB 2.0.Dimensions: 1.8"H x 7.9"W x 7.9"D.DC power interface: 12V.Indoor, dual radio, 5GHz 802.11ax 4x4 MIMO and 2.4GHz 802.11ax 2x2 MIMO.Meets or exceeds UL2043 standard.WPA, WPA2 and WPA3 – Enterprise with CNSA option, Personal(SAE), Enhanced Open ( OWE).Lifetime manufacturer limited warranty
8f7977b0a5d2d27b46d3a9be5838fd24.Create a reliable wireless business network with this wireless access point that features a high-speed data transfer rate.Its management capability provides efficient control over setup and configuration of your network.PoE PD Port: Yes
8f7977b0a5d2d27b46d3a9be5838fd24.High performance Dual Radio 802.11ax AP with OFDMA and Multi-User MIMO (MU-MIMO).Supports all mandatory and several optional 802.11ax features.Maximum data rates of 4.8Gbps in the 5GHz band and 575Mbps in the 2.4GHz band (for an aggregate peak data rate of 5.4Gbps).Mid-range 802.11ax 510 series APs ideal for high density environments, such as schools, retail branches, hotels and enterprise offices.Includes Bluetooth 5 and Zigbee radios for location and IoT use-case
Purpose-built to survive in the harshest outdoor environments, Aruba 580 Series outdoor access points are designed for the highest levels of performance and greater deployment flexibility – all backed by a limited lifetime warranty. Aruba 580 Series APs deliver the speed and reliability needed for large enterprise and Industrial IoT deployments with high-power Bluetooth and 802.15.4/Zigbee radios and flexible power options..Wireless dual-band (2.4GHz, 5GHz) outdoor access point designed for the highest levels of performance and greater deployment flexibility.Flagship Wi-Fi 6 performance and speed with a maximum aggregate data rate of 2.97 Gbps and dual-band 4x4 radios.Flexible connectivity and power options with support for 5 Gbps SmartRate Ethernet ports or 10Gbps SFP+ ports and 802.3bt Class 6 power or AC power.Supports direct AC power and Power over Ethernet (POE; on port E0 only).Supported frequency bands: 2.400 to 2.4835 GHz (ISM); 5.150 to 5.250 GHz (U-NII-1); 5.250 to 5.350 GHz (U-NII-2A); 5.470 to 5.725 GHz (U-NII-2C); 5.725 to 5.850 GHz (U-NII-3/ISM).Features built in omni-directional antennas (H and V polarized); 5Ghz antennas 4.5dBi uncorrelated avg (5.8dBi peak); 2.4GHz antennas 3.0dBi uncorrelated avg (4.4dBi peak); Bluetooth antenna 4.8dBi peak.Support for 5Gbps NBase-T Ethernet, up to 10Gbps SFP+, and 1Gbps (w/PoE Out).High-power Bluetooth and Zigbee radio for IoT connectivity with support for maximum range and performance.Aruba Intelligent Power Monitoring (IPM) allows the AP to operate if there is not enough PoE power as well as manage heat to prevent overheating in the most extreme environments.State of the art security with WPA3 and Enhanced open.Great for large-scale outdoor environments including universities, large enterprises, and industrial applications.Built to survive the harshest environments, the IP66/67 rated access point survives high wind, extreme temperatures, and moisture.Lifetime manufacturer limited warranty