Cisco® Ceiling Mount Access Points

his compact 802.11ac Wave 2 access point is made to take advantage of in-wall network cabling without drawing attention and delivering data transfer rates of up to 1167 Mb/s over the 2.4 GHz and 5 GHz frequency bands. The 145AC's Gigabit Ethernet uplink port supports 802.3af/at power over Ethernet, allowing you to transfer both data and power over a single cable when connected to a compatible switch. Alternatively, you can power the device with a separately purchased PoE injector..Type of Product/Use: Dual-Band Access Point.Range/Wireless: Wi-Fi 5 (802.11ac) Wave 2.Data Transfer Speed: Up to 1167 Mb/s Throughput.Works with Cisco Business Mobile App.Number of Ports: 4 Gigabit Ethernet (RJ45), 1 Ethernet (RJ45).Security: WPA, WPA2, WPA3.Dimensions as H 1.2 x W 3.5 x D 5.5 in inches.Warranty: Limited Lifetime.With its sleek design, the wall plate mountable Cisco Business 145AC Dual-Band Access Point enhances your small business with smooth and reliable wireless network connections for in-room or office environments where both wired and wireless devices are used.

Extending Cisco's intent-based network and perfect for networks of all sizes, the Catalyst 9105 Access Points scale to meet the growing demands of IoT while fully supporting the latest innovations and new technologies. The Catalyst 9105 Access Points provide a seamless experience anywhere for everyone, with high scaling and unmatched performance in diverse network deployments. Going beyond the Wi-Fi 6 (802.11 ax) standard, the Catalyst 9105 Access Points provides integrated security, resiliency, and operational flexibility as well as increased network intelligence..Enterprise grade versatile wireless access point perfect for networks of all sizes.Features data rates up to 1.488 Gbps.Equipped with one 10/100/1000 Base-T (Ethernet) Uplink Interface and one RJ-45 management console port.Dimensions: 1.18"H x 5.9"W x 5.9"D.Wi-Fi 6 (802.11ax) designed to use both the 2.4-GHz and 5-GHz bands.OFDMA-based scheduling splits the bandwidth into smaller frequency allocations called Resource Units (RUs), which can be assigned to individual clients in both the downlink and uplink directions to reduce overhead and latency.Supporting two spatial streams, MU-MIMO enables access points to split spatial streams between client devices to maximize throughput.Spatial reuse (also known as Basic Service Set [BSS] coloring) allows the access points and their clients to differentiate between BSSs, thus permitting more simultaneous transmissions.A new power-saving mode called Target Wake Time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the access point.Intelligent Capture probes the network and provides Cisco DNA Center with deep analysis.Application Hosting on Catalyst 9100 Access Points helps future-proof and simplify IoT deployments by eliminating the need to install and manage overlay networks.Integrated Bluetooth Low Energy (BLE) 5 radio enables location-based use cases such as asset tracking, way finding or analytics.Container support enables edge computing capabilities for IoT applications on the host access point.Lifetime manufacturer limited warranty

The Cisco Catalyst 9130AX series access points are the next generation of enterprise access points. They are resilient, secure, and intelligent. With the emergence of high-density networks and the Internet of Things (IoT), we are more dependent on wireless networks than ever before. Increasing numbers of devices connect to the network every year, ranging from high-performance client devices to low-bandwidth IoT devices. Cisco Catalyst 9130AX series access points provide a seamless experience anywhere for everyone, with high scaling and unmatched performance in diverse network deployments. Going beyond the Wi-Fi 6 (802.11ax) standard, the 9130AX series provides integrated security, resiliency, and operational flexibility as well as increased network intelligence. Extending Cisco's intent-based network and perfect for networks of all sizes, the Cisco Catalyst 9130AX Series scales to meet the growing demands of IoT while fully supporting the latest innovations and new technologies. The 9130AX series is also a leader in performance, security, and analytics. The Cisco Catalyst 9130AX series access points, paired with the Cisco Digital Network Architecture (Cisco DNA), are enterprise-class products that will address both your current and future needs. They are the first step in updating your network to take better advantage of all of the features and benefits that Wi-Fi 6 provides..This access point provides integrated security, resiliency, and operational flexibility as well as increased network intelligence.Provides up to 5.38Gbps (8x8 80MHz or dual 4x4 80+80MHz on 5GHz and 4x4 20MHz on 2.4GHz).Contains 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ45): IEEE 802.3az, management console port (RJ45), and USB 2.0 at 4.5W (enabled via future software).Dimensions: 1.88"H x 8.9"W x 8.9"D.Meets or exceeds IEC, EN, UL, CAN/CSA, AS/NZS, ICES, VCCI-CISPR, RSS standards.Delivers a better experience in typical environments with more predictable performance for advanced applications such as 4K or 8K video, high-density, high-definition collaboration apps, all-wireless offices, and IoT.The Cisco RF Application-Specific Integrated Circuit (ASIC) is a fully integrated Software-Defined Radio (SDR) that can perform advanced RF spectrum analysis and delivers features such as Cisco CleanAir, Wireless Intrusion Prevention System (WIPS), FastLocate, and Dynamic Frequency Selection (DFS) detection.Orthogonal Frequency-Division Multiple Access (OFDMA)-based scheduling splits the bandwidth into smaller frequency allocations called Resource Units (RUs), which can be assigned to individual clients in both the downlink and uplink directions to reduce overhead and latency.Supporting eight spatial streams, Multiuser Multiple Input, Multiple Output (MU-MIMO) enables access points to split spatial streams between client devices to maximize throughput.Power-saving mode called Target Wake Time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the access point.Comes in white.Lifetime manufacturer limited warranty

The AP 430 CR is perfect for high-density deployments that include an industrial-rated IP67 enclosure, designed for either indoor or rugged outdoor deployment with superior Wi-Fi 6 performance and secure WPA3 encryption. Includes six external antennas to deliver a maximum TX power of 23dBm. One ethernet port is included to support up to 5 Gbps and includes one gigabit PoE+ port. Lightning-fast speed crafts an unwavering connectivity executed through a total of 2402 Mbps the 5 GHz band and 574 Mbps delivered on the 2.4 GHz band. Integrated 4x4 radio chains and streams to deliver a secure and seamless network experience. WatchGuard's AP130, AP330, AP430CR, and AP432 requires an active Management License. Select from a Standard or USP Management License to activate and access WatchGuard Cloud. The Management License is required to activate and manage the WatchGuard access points. Requires 6 external antennas (WG9004) sold separately..Dual-band (2.4 GHz and 5 GHz) designed for outdoor use in harsh environments..Max Data rate up to 574 Mbps available on the 2.4 GHz band, Max Data rate up to 2.3 Gbps on the 5 GHz band.Supports PoE (802.3at) and Wi-Fi 6 standard..Offers MU-MIMO for efficient multiple device connectivity..1-GbE-RJ45 Ports 1x 5-GbE-RJ45 Ports 1x PoE Powered Device (PD) PoE-PD Ports.Package Contents AP430CR Outdoor Access Point Wall Mount Plate Pole Mount Clamp.Powered via PoE or optional DC power adapter..Operates on 2.4 GHz and 5 GHz frequencies with enhanced range..IP67-rated for dust and water resistance, compliant with FCC, CE, and RoHS..Comes with a 1-year limited hardware warranty.Support for up to eight individual SSIDs per radio allows for maximum flexibility in network design.Lightning-fast speed crafts an unwavering connectivity experience executed by 2402 Mbps on the 5 GHz band and 574 Mbps delivered on the 2.4 GHz band

The WatchGuard AP332CR is designed for medium-density deployments and is IP67-rated to enable use in outdoor and rugged environments. This dual-band access point delivers fast, reliable coverage with a 2x2 radio and four external, omnidirectional antennas offering up to 1.2 Gbps on the 5 GHz band. A single PoE+ port is included to support data rates up to 2.5 Gbps. Utilizing WatchGuard Cloud for deployment and configuration, the AP332CR offers a seamless experience with Wi-Fi 6 performance and WPA3 encryption ? making it ideal for building easily scalable networks across school campuses, public hotspots, and smaller manufacturing environments..Dual-band (2.4 GHz and 5 GHz) for outdoor/rugged environments..Wi-Fi 6 (802.11ax) with up to 2.4 Gbps (5 GHz) and 574 Mbps (2.4 GHz)..One PoE+ port supporting up to 2.5 Gbps, Wi-Fi 6 standard..Provides MU-MIMO for efficient, multiple device connectivity..Interfaces/Ports Ethernet Technology 2.5 Gigabit Ethernet Number of Network (RJ-45) Ports 1 PoE PD Port.Package Contents AP332CR Outdoor/Rugged Access Point 4 x Omnidirectional External Antennas.Powered via PoE or optional DC power input..Operates on 2.4 GHz and 5 GHz bands for wide coverage..IP67-rated for dust and water resistance, compliant with FCC, CE, and RoHS..Comes with a 1-year limited warranty.One PoE+ port supporting up to 2.5 Gbps

WatchGuard's AP 130 is an ideal Wi-Fi 6 solution to support low-density indoor environments like a small office or remote workers with a secure WPA3 encryption. Integrated security is delivered by supporting the 802.11 standard and WPA3 encryption to enhance the Wi-Fi experience. Includes Wi-Fi 6 2x2 radio with four internal antennas. Maximum TX power delivers 22 dBm and a 3dBi antenna gain with one Ethernet port supporting up to 1 Gbps. Maximum data rate includes a crystal clear and seamless wireless experience supporting 1.2 Gbps on the 5 GHz band and 574 Mbps available on the 2.4 GHz band. WatchGuard’s AP130, AP330, AP430CR, and AP432 requires an active Management License. Select from a Standard or USP Management License to activate and access WatchGuard Cloud. The Management License is required to activate and manage the WatchGuard access points..This Dual-Band (2.4 GHz and 5 GHz) Device is designed for low-density indoor environments such as small offices or for remote workers..The WatchGuard AP130 supports the Wi-Fi 6 (802.11ax) standard Here are the maximum data transfer rates 2.4 GHz Band Up to 574 Mbps (0.574 Gbps) 5 GHz Band: Up to 1200 Mbps (1.2 Gbps).The WatchGuard AP130 supports PoE (Power over Ethernet): 54V DC 802.3at (PoE+)12. WiFi Standard: Wi-Fi 6 (802.11ax).Supports high-efficiency wireless connectivity with WPA3 encryption..Connector, Port or Interface Types are 1 x 1 Gbps Ethernet port (PoE+), 1 x USB port (currently not in use), 1 x RJ45 serial console port..Included Components AP130 Access Point Unit, Ceiling Mount T-Rail Brackets, Wall Mount Screws and Spacers, Quick Start Guide.Power source of 54V DC 802.3at (PoE+).Device supports these Frequencies 2.4 GHz and 5 GHz bands..Complies with the Restriction of Hazardous Substances (RoHS) directive, ensuring the product is free from specific hazardous materials and environmentally friendly..The WatchGuard AP130 comes with a standard 1-year hardware warranty.

The AP 330 is WatchGuard's all-purpose Wi-Fi 6 access point and is the ideal choice for mid-density indoor environments of all sizes to utilize the most secure WPA3 encryption for a seamless experience. Includes 2x2 radio scanning optimized for Wi-Fi 6 with six internal antennas. Maximum TX power delivers 22 dBm and a 2dBi antenna gain with one Ethernet port supporting up to 2.5 Gbps. These Wi-Fi 6 access points deliver a maximum data rate for a seamless wireless experience by supporting up to 1.2 Gbps on the 5 GHz band and 574 Mbps available on the 2.4 GHz band. WatchGuard’s AP130, AP330, AP430CR, and AP432 requires an active Management License. Select from a Standard or USP Management License to activate and access WatchGuard Cloud. The Management License is required to activate and manage the WatchGuard access points..The WatchGuard AP330 operates on dual bands: the 2.4 GHz and 5 GHz frequencies. It is designed for medium-density indoor environments, such as offices, schools, and retail spaces, providing reliable and high-efficiency Wi-Fi 6 connectivity..It supports the Wi-Fi 6 (802.11ax), standard up to 1.2 Gbps on the 5 GHz band and 0.574 Gbps on the 2.4 GHz band..The WatchGuard AP330 supports PoE (Power over Ethernet) 54V DC 802.3at (PoE+).Supports high-efficiency wireless connectivity with WPA3 encryption..Connector, Port or Interface Types are 1 x 2.5 Gbps Ethernet port (PoE+), 1 x USB port (currently not in use), 1 x RJ45 serial console port..Included Components are Access point unit, mounting hardware, quick start guide..Power Source PoE 54V DC 802.3at..This device have Frequencies of 2.4 GHz and 5 GHz bands..Its has The Restriction of Hazardous Substances (RoHS) is a standard..The WatchGuard AP330 comes with a standard 1-year warranty

The Cisco Catalyst 9124AX Series outdoor access points are next-generation Wi-Fi 6 access points encased in a rugged and robust design that service providers and enterprises can easily deploy. With the emergence of high-density networks and the Internet of Things (IoT), we are more dependent on wireless networks than ever before. An increasing number of devices connect to the network every year, ranging from high-performance client devices to low-bandwidth IoT devices. The Cisco Catalyst 9124AX Series outdoor access points provide a seamless experience, with high scaling and unmatched performance in diverse network deployments. Going beyond the Wi-Fi 6 (802.11ax) standard, the Catalyst 9124AX Series provides integrated security, resiliency, and operational flexibility as well as increased network intelligence. The Catalyst 9124AX Series offers flexible deployment options for service providers and enterprise networks that need the fastest links possible for mobile, outdoor clients (smartphones, tablets, and laptops), and wireless backhaul. With options for internal or external antennas, the 9124AX Series gives network operators the flexibility to balance their desired wireless coverage with their need for easy deployment. The Catalyst 9124AX Series access points, paired with the Cisco Digital Network Architecture (Cisco DNA), are enterprise-class products that will address both your current and future needs. They are the first step in updating your network to take better advantage of all of the features and benefits that Wi-Fi 6 provides..Wireless dual-band (2.4GHz, 5GHz) outdoor access point intended for enterprises that need more wireless capacity and/or wider channels.AX dual-band access point.One port with PoE support.Wi-Fi 6 certification supports all mandatory 802.11ax features that include MIMO, OFDMA, TWT, and more.Contains a one 2.5 Gigabit Ethernet uplink port with PoE-in support (802.3bt), and one Gigabit Ethernet SFP ports.Power over Ethernet (PoE): 802.3bt or DC power.Dual radio for simultaneous dual-band operation (5GHz and 2.4GHz, 802.11ax, 4 x 4 MU-MIMO).Meets or exceeds the IP66/IP67 IEC 60529 Ingress Rating, MIL-STD-810F, NEMA 250-2008, EN 60068-2-5, MIL-STD-810E, Method 514.4 standards.One status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors.Safeguard sensitive data with WPA2/WPA3 and Enhanced Open.Cisco DNA software support.Lifetime manufacturer limited warranty

Ubiquiti Networks designed airMAX AC radios for high performance and ease of installation. You have the freedom to deploy the Bullet AC anywhere in the world, as it allows for a high degree of flexibility in configuring channel bandwidths (subject to local country regulations. The Bullet AC eliminates the need to use RF cables and requires no special antenna or tools to install. There are no radio card / host board issues, no RF cable quality concerns, no mechanical stability concerns, and no enclosure mounting requirements. With the Bullet AC, operators can just plug in and go..Access Point is a fully integrated radio that delivers up to 300+ Mb/s real TCP/IP throughput.Dimensions: 7.48"H x 1.81"W x 1.81"D.Access point covers both 2.4GHz and 5GHz radio bands, covering a wide range of frequencies that work well for both short- and long-distance links.Meets or exceeds CE, FCC, and IC certifications.Networking interface: Gigabit Ethernet port; antenna connector: N-type connector.Throughput 160+ Mb/s at 2.4GHz, 300+ Mb/s at 5GHz.Maximum power consumption: 8W; output power: 22dBm.Power supply: 24VDC, 0.3A (minimum); power method: 24V passive PoE (pairs 4, 5+; 7, 8 return).ESD/EMP protection: +/- 24kV contact/air.Operating temperature: -40 degrees Fahrenheit to 158 degrees Fahrenheit.Operating humidity 5% to 95% noncondensing.ETSI300-019-1.4 shock and vibration.1-year manufacturer limited warranty

The Cisco Catalyst 9120AX series access points are resilient, secure, and intelligent. We are more dependent on our wireless networks than ever before. Additional devices connect to the network every year, and the Cisco Catalyst 9120AX series access points will provide a seamless experience anywhere for everyone. Going beyond the Wi-Fi 6 (802.11ax) standard, the 9120AX series provides integrated security, resiliency, and operational flexibility as well as increased network intelligence. Extending Cisco's intent-based network and perfect for networks of all sizes, the Cisco Catalyst 9120AX series scales to the growing demands of IoT while fully supporting the latest innovations and new technologies. Not only that, but the 9120AX series is a leader in performance, security, and analytics. The Cisco Catalyst 9120AX series access points, paired with Cisco DNA, are enterprise-class products that will address your current and future needs. These access points are the first step in updating your network so that you can take better advantage of all of the features and benefits that Wi-Fi 6 provides..Wireless dual-band (2.4GHz, 5GHz) indoor access point intended for enterprises that need more wireless capacity and/or wider channels.AX dual-band access point.One port with PoE support.Wi-Fi 6 certification supports all mandatory 802.11ax features that include MIMO, OFDMA, TWT, and more.Contains a two 2.5 Gigabit Ethernet uplink port with PoE-in support (802.3at), USB 2.0 @ 4.5W host interface, Auto-MDIX, and management console port (RJ-45).Power over Ethernet (PoE): 802.3at.Dual radio for simultaneous dual-band operation (5GHz and 2.4GHz, 802.11ax, 4 x 4 MIMO).Meets or exceeds the UL2043,EN 55032 (rev. 2015), EN 301 489-17 (v3.1.1 2017-02), UL 60950-1, and EN 301 893 (v2.1.1) standards.Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors.Compact multi-RF connector with DART interface.Cisco Catalyst 9120AXE access points are certified for use with antenna gains up to 6dBi (2.4GHz and 5GHz).Safeguard sensitive data with WPA2/WPA3 and Enhanced Open.Cisco DNA software support.Lifetime manufacturer limited warranty

Ideal for smaller networks, the Cisco Business 151AXM Mesh Extender brings a full slate of Cisco high-performance functionality to the business environment at an affordable price point..Type of Product/Use: Wireless Range Extender.1.49Gbit/s Wireless Range Extender.2.4GHz, 5GHz.Dimensions as H x W x D in inches: 2.1 x 6.7 x 3.6.3 Year Warranty

Multi-gig WiFi 6 access point for small businesses Delivering AX3000 WiFi speed with 2.5G Ethernet uplink port, the Zyxel NWA50AX Pro provides the powerful and fastest WiFi 6 speed for small businesses, SoHo, and home offices. With a data transfer rate of up to 3000 Mbps and support for Wi-Fi 6 technology, the Zyxel NWA50AX Pro ensures high-speed Internet connectivity across both 2.4 GHz and 5 GHz bands. Its inclusion of 2x2:2 and 3x3:2 MU-MIMO technology allows for multiple devices to connect simultaneously without sacrificing speed or reliability. The device offers robust security features including WPA-Personal, WPA2-Personal, and WPA3-Personal encryption algorithms. This ensures that your network remains secure against unauthorized access and protects sensitive data from potential cyber threats. Designed for easy integration into existing networks, the Zyxel NWA50AX Pro supports a wide range of standards including IEEE 802.11k, r, and v for wireless connectivity, as well as PoE+ for power. Its cloud-managed capability allows for effortless setup and management, making it an ideal solution for businesses looking to upgrade their network infrastructure. With an MTBF (Mean Time Between Failures) of 420,539 hours, the Zyxel NWA50AX Pro is built to last. It operates within a wide temperature range from 0 °C to 50 °C and maintains performance levels even in non-condensing humidity ranges of 10 - 90%, ensuring reliability in various environmental conditions. This wireless access point comes equipped with advanced features such as Fast Roaming, Mesh networking, and VLAN support. It also includes capabilities for dynamic channel selection and band steering, optimizing the wireless network's performance and efficiency..AX3000 (3x3:2 in 5 GHz; 2x2:2 in 2.4 GHz) AP provides maximum data rate of 3000 Mbps.The 2.5G uplink port enables multi-gig connectivity for small biz networks, making it easy to upgrade to high-speed networks without re-cabling.The Multi-gig Connection Stabilization Pad secures the connection between the Cat 5E cable and the RJ45 connector to ensure the 2.5G speed is linked for maximum throughput.WiFi 6 access point, 2400Mbps.Easy self-installation/ configuration with right-fit feature set, perfect for small business and SOHO.NebulaFlex allows users to switch between standalone or intuitive Nebula cloud managed modes as needed.ZYXEL Nwa50ax Pro - 802.11ax (Wi-Fi 6) Dual-radio Poe Access Point

WatchGuard’s high-performance Wi-Fi 6 access point is the ideal choice for high-density indoor environments of all shapes and sizes to utilize the most secure WPA3 encryption for a seamless Wi-Fi 6 experience for end users to enjoy.Dual-band (2.4 GHz and 5 GHz) for high-density environments..Wi-Fi 6 (802.11ax) with up to 4.8 Gbps (5 GHz) and 1.148 Gbps (2.4 GHz)..Supports PoE (802.3at) and Wi-Fi 6 standard..Supports MU-MIMO for multiple device connectivity..2.5 Gigabit Ethernet (GbE) port for wired connectivity..Includes access point unit, mounting hardware, and user guide..Powered via PoE or separate power adapter..Operates on 2.4 GHz and 5 GHz frequency bands..Complies with Wi-Fi 6 (802.11ax), FCC, CE, and RoHS certifications..Comes with a 1-year limited warranty.Qualcomm Cypress IPQ8072A Quad-core A53 ARM processor at 2 GHz with 2 GB RAM and 256 MB Flash

Weatherproof and temperature hardened, Aruba 560 series access points deliver cost-effective Wi-Fi 6 wireless connectivity in outdoor and environmentally challenging locations. Purpose-built to survive in the harshest outdoor environments, 560 series can withstand exposure to extreme high and low temperatures, persistent moisture and precipitation, and are fully sealed to keep out airborne contaminants. All electrical interfaces include industrial strength surge protection. Aruba Wi-Fi 6 access points provide high-performance connectivity for any organization experiencing growing numbers of IoT and mobility requirements. With maximum aggregate on air data rate of 1.49Gbps (HE80/HE20), they deliver the speed and reliability needed for most environments. The Aruba advanced ClientMatch technology and an integrated Bluetooth beacon can help enable Aruba location services..Weatherproof and temperature-hardened, this access point delivers cost-effective dual-band (2.4GHz, 5GHz) Wi-Fi 6 wireless connectivity in outdoor and environmentally challenging locations.With maximum aggregate on-air data rate of 1.49Gbps (HE80/HE20), the AP delivers the speed and reliability needed for most environments.AP can be configured to enable or disable capabilities based on available PoE power, perfect when wired switches have exhausted their power budget.Wi-Fi 6 access point provide high-performance connectivity for any organization experiencing growing numbers of IoT and mobility requirements.Features 1 x Ethernet wired network port (RJ45) and 1 x USB Type-C console interface.Meets or exceeds the FCC/ISED, CE Marked, RED Directive 2014/53/EU, EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, UL/IEC/EN 60950, EN 60601-1-1, EN60601-1-2, TAA standards.Low-density parity check (LDPC) for high-efficiency error correction and increased throughput.Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks.2.4GHz band maximum (conducted) transmit power (limited by local regulatory requirements): +23dBm per chain, +26dBm aggregate (2 x 2);­ 5GHz band: +23dBm per chain, +26dBm aggregate (2 x 2).­Supported modulation types: 802.11b: BPSK, QPSK, CCK; 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (proprietary extension); 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM (proprietary extension); 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM.5GHz: two spatial stream single-user (SU) MIMO for up to 1.2Gbps wireless data rate with individual 2SS HE80 802.11ax client devices or with two 1SS HE80 802.11ax MU-MIMO capable client devices simultaneously; 2.4GHz: two spatial stream single-user (SU) MIMO for up to 574Mbps (287Mbps) wireless data rate with individual 2SSHE40 (HE20) 802.11ax client devices or with two 1SS HE40 (HE20) 802.11ax MU-MIMO capable client devices simultaneously.Each AP provides connectivity for a maximum of 256 associated clients per radio (512 in total).Aruba advanced ClientMatch technology and an integrated Bluetooth beacon can help enable Aruba location services.Minimum operating system software versions: ArubaOS and Aruba InstantOS 8.8.0.0.Dimensions: 6.5"H x 6.5"W x 4.3"D.Regulatory domain: United States of America.Lifetime manufacturer limited warranty

The UniFi Controller v4 software is a powerful, enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities, the UniFi virtual control plane allows for unlimited scalability under one centralized controller..Type of Product: Wireless Access Point.Adapter Speed: 1300Mbit/s.Number of ports and Type: Gigabit Ethernet 2, PoE PD Port.Dimensions as H x W x D in inches: 7.7 x 7.7 x 1.4.Power Rating/Voltage: DC Input Power, Consumption 9 W.Frequency Range: 2.4 GHz, 5 GHz Dual-Band.Support/Encryption: Guest Portal/Hotspot Support.Warranty 1 Year.Form factor: Wall mountable, ceiling mountable.Wireless transmission speed: 1.27 Gbps, 2.4 GHz speed: 450 Mbps, 5 GHz speed: 1300 Mbps.Have 200+ concurrent clients.Supports guest traffic isolation.Intuitive UniFi controller software delivers powerful performance and intelligent switching.Design: Expandable.Contains wall/ceiling kits.Meets CE, FCC, IC certifications and standards.The UniFi AC Pro AP features the latest Wi-Fi 802.11ac, 3x3 MIMO technology in a refined industrial design and is ideal for deployment of maximum‑performance wireless networks.

i24 is a gigabit dual-band ceiling access point that compliant with IEEE 802.11ac Wave 2, and offers a concurrent data rate up to 1167 Mbps. Powered by MU-MIMO technology, letting you enjoy better experience. And the built-in omni-directional antennas broaden the wireless coverage of a single AP. In addition, you are allowed to adjust its transmit power as required using the web UI, and use an IEEE 802.3at-compliant PoE sourcing equipment to power on it, achieving long-distance power supply without tampering your existing grid network. You are also allowed to use Tenda access controllers (AC) to configure and manage multiple i24 in a centralized manner..Access point operates on two wireless bands . The dual-band capability allows for more flexible and efficient wireless connectivity, making it suitable for both home and small business environments..Supports the 802.11ac Wave 2 wireless standard. It offers a maximum data transfer rate of 1167 Mbps (1.167 Gbps).This access point supports Power over Ethernet (PoE). it adheres to the Wi-Fi 5 standard, ensuring high-speed and reliable wireless connectivity..Provides robust wireless connectivity with the following features: Dual-Band Support: Operates on both 2.4 GHz and 5 GHz bands for flexible and efficient connectivity..includes the following connector, port, and interface types: One 10/100/1000 Mbps Ethernet Port (PoE) RESET Button SYS LED Indicator.In the box : Tenda I24 Access Point Power Adapter (DC: 12V 1A) Ethernet Cable User Manual Quick Installation Guide.Can be powered using: Power over Ethernet (PoE) DC power adapter (DC: 12V 1A).Certified by : Restriction of Hazardous Substances (RoHS)..Comes with a 3 year limited warranty.