Clamp Meters with Temperature
4 results
This compact autoranging clamp meter is capable of measuring AC current, AC/DC voltage, resistance, frequency, capacitance, duty cycle and temperature. Featuring double molded plastic housing, the R5020 includes diode check and continuity functions and a non-contact voltage detector built into the clamp tip..Measures AC current, AC/ DC voltage, resistance, capacitance, frequency, duty cycle and temperature.4000-count LCD display with low battery and over range indicators.Built-in non-contact voltage detector with LED indicator.Display hold and relative mode.Diode test and continuity check functions.Durable double molded plastic housing.Cat. III 600V safety rating.7.9"H x 2.6"W x 1.5"D.Blue.AC current range of 40, 400A.AC accuracy of + or -(2.5% rdg. + 8 dgt.).AC resolution of 0.01, 0.1A.AC voltage range of 4, 40, 400, 600V.DC voltage range of 400mV, 4, 40, 400, 600V.AC voltage accuracy of + or -(1.8% rdg. + 8 dgt.).DC voltage accuracy of + or -(1.5% rdg. + 2 dgt.).AC voltage resolution of 0.001, 0.01, 0.1, 1V.DC voltage resolution of 0.1mV, 0.001, 0.01, 0.1, 1V.Resistance range of 400ohm, 4, 40, 400kohm, 4, 40Mohm.Includes test leads, a thermocouple wire probe, a thermocouple adapter, batteries and a soft carrying case.Compact AC clamp meter with built-in non-contact voltage detector and contact thermometer
The Fluke 325 True RMS Clamp Meter is a powerful, compact tool designed for professional electricians and technicians who require accurate electrical measurements in tight spaces. Ideal for both residential and commercial applications, this versatile meter measures AC/DC current up to 400 A, voltage up to 600 V, resistance, continuity, frequency, and even temperature, all with True RMS accuracy for reliable readings on non-linear loads. Its slim, ergonomic design allows for easy one-handed operation, while the large, backlit display ensures clear visibility in any environment. With built-in features like data hold, min/max recording, and a wide jaw opening that accommodates conductors up to 30 mm, the Fluke 325 is a dependable solution for diagnosing and troubleshooting electrical systems efficiently and safely..Electrical monitoring tool designed to measure current, voltage, resistance, continuity, frequency, and temperature..The Fluke 325 comes complete with TL75 test leads, a Type K thermocouple for temperature measurements, 2 pre-installed AAA batteries, and a soft carrying case for added portability and protection..The clamp meter measures approximately 8.15 inches in height, 2.95 inches in width, and 1.34 inches in depth (207 mm x 75 mm x 34 mm), offering a compact profile that fits easily in the hand or tool bag..The unit weighs approximately 0.62 pounds (283 grams), making it lightweight and convenient for extended use in the field..Suitable for both residential and commercial electrical environments.
This compact autoranging True RMS clamp meter is capable of measuring AC/DC current and voltage, resistance, frequency, capacitance, duty cycle and temperature. Featuring a 50,000 count backlit LCD display, double molded plastic housing, the R5030 includes diode check and continuity functions and a non-contact voltage detector built into the clamp tip..Measures AC/DC current/voltage, resistance, capacitance, frequency, duty cycle and temperature.50000-count backlit LCD display with low battery and overrange indicators.Built-in non-contact voltage detector with LED indicator.True RMS AC measurements.Display hold and relative mode.Diode test and continuity check functions.Durable double molded plastic housing.Cat. III 600V safety rating.7.9" (h) x 2.6" (w) x 1.5" (d).AC/DC current range of 50.00, 500.0A.AC current accuracy of + or -(2.8% rdg. +30 dgt.).DC current accuracy of + or -(2.5% rdg. +30 dgt.).AC/DC current resolution of 0.01, 0.1, 1A.AC voltage range of 500mV, 5, 50, 500, 750V.DC voltage range of 500mV, 5, 50, 500, 1000V.AC voltage accuracy of + or -(1.0% rdg. +30 dgt.).DC voltage accuracy of + or -(0.1% rdg. +4 dgt.).AC/DC voltage resolution of 0.1mV, 0.001, 0.01, 0.1, 1V.Includes test leads, a thermocouple wire probe, a thermocouple adapter, batteries and a soft carrying case.Compact AC/DC clamp meter with backlit display, built-in non-contact voltage detector and contact thermometer
This Industrial Combo Kit includes the tools required for your plant maintenance needs. The RINDUST-KIT includes a Multimeter, Clamp Meter, AC Voltage Detector, Infrared Thermometer and Hard Carrying Case. The carrying case features a customized foam insert built specifically to store and protect the included instruments..R5010- True RMS multimeter with built-in non-contact voltage detector and 40,000 count backlit LCD display..R5020- Compact AC clamp meter with built-in non-contact voltage detector and contact thermometer.R2002- Pocket-sized infrared thermometer with backlit display and fixed emissivity will cover 90% of non-contact temperature applications..R5100- Non-Contact AC Voltage Detector with Flashlight.AD-1- This adapter converts any Type-K thermocouple temperature probe with a mini-connector to dual shrouded banana plug inputs..TP-01- Beaded Thermocouple Wire Probe, Type K, -40 to 482Ā°F (-40 to 250Ā°C).TL-88-1- Safety Test Lead Set, Double Insulated.R8890- Professional grade, injection molded hard plastic case with customizable foam inserts.
You May Also Like
This pocket-sized digital multimeter measures AC/DC voltage and current, resistance, frequency, capacitance and duty cycle. Designed to fit into the palm of your hand this compact DMM also includes diode test and continuity check functions..4.3"H x 2.3"W x 0.43"D.AC voltage range of 4, 40, 400, 600V.DC voltage range of 6400mV, 4, 40, 400, 600V.AC voltage accuracy of 4,40,400V + or -(1.2% rdg. + 3 dgt.) 600V + or -(1.5% rdg. + 5 dgt.).DC voltage accuracy of 400mV + or -(0.8% rdg. + 3 dgt.) 4,40,400V + or -(0.8% rdg. + 1 dgt.) 600V + or -(1% rdg. + 3 dgt.).AC voltage resolution of 1, 10, 100mV, 1V.DC voltage resolution of 0.1, 1, 10, 100mV, 1V.AC/DC current range of 400, 4000 A, 40, 400mA.AC current accuracy of 400/4000 A + or -(1.5% rdg. + 5 dgt.) 40/400mA + or -(2% rdg. + 5 dgt.).DC current accuracy of 400/4000 A + or -(1.0% rdg. + 3 dgt.) 40/400mA + or -(1.2% rdg. + 5 dgt.).AC/DC current resolution of 0.1, 1, 10, 100 A.Resistance range of 400ohm, 4, 40, 400kohm, 4, 40Mohm.Includes test leads, a battery and a carrying case.Auto ranging digital multimeter with 4,000 count LCD display
This auto ranging multimeter is capable of measuring AC/DC voltage and current, resistance, frequency, capacitance and temperature. Featuring double molded plastic housing, the R5008 includes diode check and continuity functions and ships complete with test leads and a thermocouple probe for contact temperature measurements..Measures AC/DC voltage and current, frequency, resistance, capacitance and temperature.Diode check and continuity functions.Relative and data hold functions.Double molded plastic housing.Cat. III 600V safety rating.5.9"H x 2.8"W x 1.9"D.AC voltage range of 400mV, 4, 40, 400, 600V.DC voltage range of 400mV, 4, 40, 400, 600V.AC voltage resolution of 0.1mV, 1, 10, 100V.DC voltage resolution of 0.1mV, 1, 10, 100V.AC/DC current range of 400, 4000 A, 40, 400mA, 10A.AC/DC current resolution of 0.1, 1 A, 10, 100mA, 1A.Resistance range of 400ohm, 4, 40, 400kohm, 4, 40Mohm.Resistance resolution of 0.01ohm, 1, 10, 100kohm, 1, 10Mohm.Includes a temperature input adapter, type K thermocouple wire probe, test leads, a battery and a carrying case.Compact auto ranging digital multimeter with 11 functions
This auto ranging multimeter is IP67 rated, has a 40,000 count display for precise readings and is capable of measuring AC/DC voltage and current, frequency, resistance, capacitance and temperature. This DMM also includes diode and continuity tests and features 4-20 mA loop measurement and a digital analog bargraph..True RMS AC/DC voltage and current measurements.Measures frequency, resistance, capacitance and temperature.Diode check and continuity functions.Backlit LCD readout with analog bar graph.4-20 mA process loop measurements with % readout.Data hold, Max/Min and Peak capture mode.IP67 dust and waterproof.Cat. IV 600V, Cat. III 1000V safety rating.7.4"H x 3.2"W x 2.0"D.AC range of 400mV, 4, 40, 400, 1000V.DC range of 400mV, 4, 40, 400, 1000V.AC accuracy of + or -(1.0% rdg. + 5 dgt.) at 400mV and + or -(1.0% rdg. + 3 dgt.) for other ranges.DC accuracy of + or -(0.1% rdg. + 5 dgt.) at 1000V and + or -(0.06% rdg. + 2 dgt.) for other ranges.AC resolution of 0.1mV, 0.001, 0.01, 1V.DC resolution of 0.01mV, 0.0001, 0.01, 0.1V.AC/DC current range of 400, 4000 A, 40, 400mA, 10A.AC current accuracy of + or -(1.5% rdg. + 3 dgt.).DC current accuracy of + or -(1.0% rdg. + 3 dgt.).Temperature range of -58 to 1832degree f (-50 to 1000degree C).True RMS multimeter with built-in non-contact voltage detector and 40,000 count backlit LCD display
This versatile Reed Instruments compact-sized multimeter measures AC/DC voltage and current, resistance, capacitance, frequency, diode, and continuity. It also features a built-in non-contact voltage detector to quickly detect live voltage on electrical circuits found in residential, commercial, and industrial buildings..Multimeter to measure AC/DC voltage and current, resistance, capacitance, frequency, diode, and continuity.Built-in non-contact voltage detector and double-molded plastic housing.4000-count backlit LCD display.Low battery indicator and auto shutoff.CAT III 600V safety rating
This high voltage insulation tester is capable or testing voltages up to 5000V and measures insulation resistance up to 60GĪ©. The R5002 performs a spot insulation test by applying a regulated and stabilized voltage to measure the amount of flowing current and then calculates resistance in order to evaluate insulation integrity..Test Voltages of 500V, 1000V, 2500V, and 5000V.Measure Insulation Resistance to 60GĪ©.Large backlit LCD display with analog bargraph.Timer function for insulation resistance measurements (1-15min).AC/DC Voltage from 0 to 600V with Max/Min, peak and relative functions.Polarization index measurement (PI).Dielectric absorption ratio measurements (DAR).Max/Min, Peak, Relative value and Data Hold functions.Cat. IV 600V safety rating.Low battery indicator and auto shut off.7.8"H x 5.8"W x 3.4"D.Blue.Test voltages of 500V, 1000V, 2500V, 5000V DC.Accuracy of + or -5% rdg. +3 dgt..Resistance measurement range of 0.1 to 6000 ohm.Accuracy of + or -1.5% rdg. +10 dgt..Buzzer sounds at 50ohm for continuity test.Less than or equal to 200mA short circuit current.Includes test leads, batteries and a carrying case.High test voltages up to 5kV with insulation resistance to 60GĪ©
This kit comes equipped with a rugged carrying case and the tools you need to conveniently calibrate your sound level meter in the field. The R8050-KIT includes the R8050 Sound Level Meter, the R8090 Sound Level Calibrator (SC-05), the R8888 Hard Carrying Case with Laser Etched Custom Foam Interior (specifically designed for the included instruments), as well as a wind shield ball and batteries..High accuracy of Ā±1.4 dB meets Type 2 standards.Dual range measurement (High and Low).A & C frequency weighting.Fast & Slow time weighting.Easy-to-read backlit LCD display.Data hold and Max hold functions.Tripod mount for long-term monitoring.Low battery indicator and auto shut off
The REED ST-5500 has many features such as 250V, 500V or 1000V test voltage combinations, a large, easy-to-read dual display with backlight and a durable double molded plastic housing making it stand up to the test of time..Insulation tester for test voltages of 250, 500 or 1000V.8" (h) x 3.5" (w) x 2" (d).Blue.1mA test current for Mohm range at rated voltage.200mA test current for continuity range.Continuity test with beeper.Large, easy-to-read dual display with backlight.Data hold switch.Test button may be locked on for hands-free operation.Double molded plastic housing.Meets IEC61010-1 Cat. III 1000V.Insulation Resistance Range of 200Mohm, 2000Mohm.Insulation Resistance Accuracy of + or -3.5% rdg. + or -5 dgt.Resistance Range of 200ohm, 2000ohm.Resistance Accuracy of + or -1% rdg. + or -2 dgt.Voltage Range of 750VAC / 1000VDC.Voltage Accuracy of AC: + or -1.2% rdg. + or -10 dgt and DC: + or -0.8% rdg. + or -3 dgt.Greater than or equal to 200mA Test Current.6 x 1.5V AA batteries for power supply.Includes test leads, battery and plastic carrying case
Reed Instruments outlet tester quickly identifies faulty wiring. Plug the instrument into the receptacle under test and match the light pattern to the indicator chart to determine the fault. The R5210 features a built-in GFCI test to quickly verify GFCI outlets are functioning properly..Receptacle tester with a built-in GFCI trip test to quickly verify GFCI outlets are functioning properly.Dimensions: 3"H x 2"W x 1"D.Meets or exceeds CE and UL standards.Compact design.Detects common three-wire receptacle issues.LED indicators identify five wiring faults.Status indicator chart.Voltage range: 110-125VAC.Max current: 15A.1-year manufacturer limited warranty
This continuity tester is capable of checking circuits for continuity and identifying cables and wires up to 10,000 feet (3,000 meters) in length. Bright visual (bi-color LEDs) and loud audible (beeper) indicators allow wire ends to be tested in noisy environments. The R5300 is used by professional electricians, alarm/cable installers and in home audio installations..Local and remote continuity tester.Lightweight design, connect alligator clips and the instrument suspends from wire/cable.Visual (flashing bi-color LEDs) and audible (pulsating beeper) indicators.Probe flashes green or red to indicate polarity.Remote probe allows for one person operation.Capable of sending signal on cable/wire runs up to 10,000 ft (3000m).Includes battery.Lightweight and compact size allows for easy one person operation.
This tachometer features both the ability to measure RPM (revolutions per minute) in rotational equipment and surface speed MPM (meters per minute) with included contact adapters. The R7100 features a built-in laser pointer to assist with identifying the target area..Dual function unit with both contact and non-contact capabilities.Provides fast and accurate RPM (revolutions per min) measurements of rotating objects and surface speed measurements MPM (meters per min) with included contact adapters.Built-in laser pointer identifies target area.Internal memory recalls maximum, minimum values as well as last value stored.Large LCD display and low battery indicator.8" (h) x 2.75" (w) x 1.5" (d).Black.Photo and contact resolution of 0.1 RPM at less than 999.9 and 1 RPM at more than 1000.Surface resolution of 0.01 m/min at less than 99.99 m/min and 0.1 m/min at more than 100 m/min.Basic accuracy of + or -(0.05% + 1 dgt.).Target distance of 1.6' (500mm) for photo measurements.<1 sec response time.0.8 s sampling time when over 60RPM.Auto shut-off.Low Battery Indicator.Powered by 4 AA batteries.Includes reflective tape, large and small cone tip adapters, funnel adapter, wheel adapter, batteries, mounting screws and a hard carrying case.Dual function tachometer features the ability to measure RPM with non-contact buit-in laser and contact (MPM) measurements quickly and accurately.
This LCR meter measures inductance, capacitance and resistance with secondary parameters such as dissipation factor (D), quality factor (Q), phase angle and equivalent series/parallel resistance (ESR or Rp). The R5001 features a large easy-to-read LCD display with backlight, and data hold/relative functions..Measures inductance, capacitance and resistance.Auto ranging for AC impedance and DE resistance measurement.Auto LCR smart check and measurement.Series/Parallel modes.Ls/Lp/Cp with D/Q ESR parameters.Support DCR mode 200 to 200M?.High accuracy with 4 / 5 terminal Kelvin measurement.10kHz testing frequency and up to 100kHz output frequency.Large backlit dual LCD display.Data hold and relative functions.Low battery indication with auto power off.8.7"H x 3.8"W x 2.4"D.Blue.Inductance range 2000.0 H, 20.000/200.0/2000.0mH, 20.000/200.00/2000.0H.Inductance resolution of 0.1/1 H, 0.01/0.1/1mH, 0.01/1H.Capacitance range of 2000.0pf, 20.000/200.00/2000.0nf, 20.00/200.00/2000 f.Capacitance resolution of 0.01/0.1/1pf, 0.01/0.1/1nf, 0.1 f.Resistance range 20.000/200.00ohm, , 2.0000/20.000/200.00kohm, 2.0000/20.000/200.0Mohm.Includes test leads and batteries.Includes test leads and batteries.L, C, R measurements with test frequency up to 100kHz
This LED Light Meter is capable of measuring popular light sources including white, red, green, yellow and blue LEDs up to 199,900 Lux (19,990 Fc). The R8140 includes an auto-ranging feature to optimize resolution and keeps track of minimum and maximum readings. This instrument is also capable of measuring standard incandescent light sources..Measures ambient light levels of white, red, yellow, green and blue LED light and visible light in Foot-candles or Lux.Large, backlit LCD display.Detachable and rotatable light sensor.Min/Max and data hold functions.Cosine and color corrected measurements.User adjustable parameter for specialized light sources.Low battery indicator and auto shut off.Light range of 0 to 199,900 LUX (0 to 19,990 ft-cd).Accuracy of Incandescent Light Source is Ā±(3% rdg.+ 5 dgt) (Otheer Visible Light Source: Ā±8% rdg..Resolution of 0.1 Lux (0.01 ft-cd).Response Time of 500mS.Silicon photodiode sensor with color correction filter and cosine correction.Light Types: White LED, Yellow LED, Green LED, Red LED, Blue LED, Warm White Fluorescent, Cold White Fluorescent Lamp, Incandescent.Automatic and Manual Autoranging.6-Digit LCD Display.Min/Max and Data Hold function.Overrange Indicator.Auto Shut-off after 30 minutes.Powered by 2x AA Batteries.6.7''H x 2.5''W x 1.5"D.Weighs 7.4 oz (210g).Includes the Detachable Sensor, Sensor Cover, Hard Carrying Case and 2x AA Batteries.Auto-ranging LED light meter with detachable and rotatable sensor that allows for one-handed operation.
The R5500 instrument features a Circuit Breaker finder, a Circuit Tester and a GfCI Receptacle Tester. Quickly and easily identify the correct circuit breaker protecting a specific electrical circuit without service interruption..Simply plug the transmitter into a receptacle and scan breaker box to identify the circuit.Detects 5 3-wire receptacle wiring faults.Built-in GFCI receptacle check function.Adjustable sensitivity wheel quickly identifies breaker.Audible (buzzer) and visual (LED) indicators assist in identification.4" (h) x 2.2" (w) x 1.2" (d).Blue.Weighs 3.88oz.frequency range of 47 to 63Hz.Receiver is powered by a 9V battery (included).3-in-1 tester locates breakers, tests receptacles and GFCI circuits
This wood moisture detector uses the electrical resistance principle to measure wood moisture of approximately 170 different species of wood. The R6015 features an automatic temperature compensation (ATC) probe for increased accuracy and includes a remote hand-press for flexibility in the field..Measures wood moisture with integrated pins or with remote hand-press probe.Improved accuracy with use of included automatic temperature compensation probe.Memory contains 8 wood groups with calibrations for approx. 170 species of wood.Built-in 2-point calibration check.Low battery indicator and auto shut-off.7" (h) x 1.9" (w) x 2" (d).Black and Blue.Measuring range of 6 to 99.9% of moisture content.Accuracy of + or -1% of moisture content.Temperature compensation of -31 to 176degree f (-35 to 80degree C).Powered by 2 AAA batteries.Weighs 6.1oz.Includes a remote hand-press moisture electrode, a temperature probe, a protective cap, replacement pins, batteries and a soft carrying case.Designed specifically to measure moisture in approximately 170 species of wood
This compact light meter by Reed Instruments can be used either stand-alone or with the Reed Smart Series app (available for download on Android and iOS). When connected to the app, the light meter can be set up to log measurements over a given period..Real-time data logging light meter measures illuminance levels up to 100000 lux.Kit includes: light meter, four AAA batteries.Dimensions: 6.9"H x 1.5"W x 1"D.Weight: 3.4 oz..Can be used either stand-alone or with the Reed Smart Series app (available for download on Android and iOS).Provides wireless Bluetooth 5.0 connectivity with a range of up to 246'.Easy to operate, designed for one-hand operation.Integrated 1.3" EBTN LCD display provides flexibility for use without a mobile device.Magnetic backing allows the instrument to be mounted to metallic surfaces.Tripod mount makes possible long-term monitoring.Features a low battery indicator and auto shutoff.Batteries provide a life of up to 50 hours.Measuring range: 0-100000 lux (0-9290 FC).User-selectable sampling rate from 1 to 120 seconds.Easy setup with automatic app integration.Connect, measure, and log data from up to six instruments simultaneously.Export data via Excel or PDF, and create custom reports that can be emailed from a mobile device.Meets or exceeds the CE, UKCA, FCC, and IC ID standards.1-year manufacturer limited warranty.Safety Data Sheet
The R5090 is an easy-to-use power meter that accurately measures power consumption of household appliances. Simply set the local utility rate in Kilowatt-hours (KWH) and connect an appliance to start tracking cost. The R5090 can also be used to verify power quality by monitoring voltage, frequency and power factor..Calculates operating costs of household appliances.Displays 8 important units of measure (Voltage, Current, Watts, Frequency, Power Factor, Energy used (kWh), Total Cost and Elapsed Time).Easy-to-read, dual LCD display.Built-in battery backup.Conforms to UL and CSA standards.Calculate operating costs of household appliances.