Copper Direct Attach Cable

Cisco QSFP-H40G-CU5M 40GBASE-CR4 16.4' QSFP Direct-attach copper cable with channels offers uninterrupted signal transmission with 40 gigabit QSFP+ transceiver. Channels are easily broken out to four separate 10 gigabit SFP+ transceivers. The QSFP copper cable offers secure connection to the electrical circuitry of the system with either a copper or an optical external network. Transceiver is perfect for switches, routers and data center equipments to offer higher density..Twinaxial cable for easy signal transmission.Comes in gray color for new look.Has cable length of 16.4' for convenience.Supports network device to connect computers or other electronic devices together and provides copper conductors for high conductivity.Has 1 x QSFP+ connector on first end and 1 x QSFP+ connector on second end for flexibility.Has operating temperature range of 32 - 158 deg F for precise operation.Meets RoHS compliance.Flexibility of interface choice.Hot-swappable input/output device that plugs into a 40-Gigabit Ethernet QSFP+ ethernet switch port.Support for 40GBASE Ethernet.Operating temperature: 32 - 158 deg F.Designed for Cisco Catalyst 3016.Cisco 40GBASE-CR4 16.4' QSFP Direct-attach copper cable has hot-swappable form factor with 4 optical transmit and receive channels. Optical fiber offers easy signal transmission.

Copper cable..Compatibility: PC.Connectivity technology: Wired.Power consumption (per end): 0.57 W.Cable type: Twinax.Conductor: Copper.Storage temperature: -40 deg to 85 deg C.Connector on first end: 1 x SFP+ network.Connector on second end: 1 x SFP+ network.Cable length: 3.3'.Device supported: Network device.Length: 1 m

Cisco QSFP-H40G-CU3M 40GBASE-CR4 9.84' QSFP Direct-attach copper cable with channels offers uninterrupted signal transmission with 40 gigabit QSFP+ transceiver. Channels are easily broken out to four separate 10 gigabit SFP+ transceivers. The QSFP+ transceiver module offers secure connection to the electrical circuitry of the system with either a copper or an optical external network. Transceiver is perfect for switches, routers and data center equipments to offer higher density..Twinaxial cable for easy signal transmission.Comes in orange color for new look.Compatible with Cisco 40GBASE QSFP+ modules.Has cable length of 9.84' for convenience.Supports network device to connect computers or other electronic devices together and provides copper conductors for high conductivity.Has QSFP+ connector on first end for flexibility.Has operating temperature range of 32 - 158 deg F for precise operation.Meets IEC60825-1, CFR 21Section 1040, UL E116441, ELV standards.Cisco 40GBASE-CR4 9.84' QSFP Direct-attach copper cable has hot-swappable form factor with 4 optical transmit and receive channels. Optical fiber offers easy signal transmission.

The Cisco 3.28' tangerine direct attach copper cable has QSFP+ male connector on first end and QSFP+ male connector on second end for enhanced connectivity. It features 30 AWG copper conductors for better conductivity. This copper cable is compatible with Cisco 40GBASE-SR4 QSFP+ copper module. It is perfect for short distances and provides a high cost-effective way to establish a 40-Gigabit link between QSFP+ ports of Cisco switches within racks and across adjacent racks..Direct attach copper cable is a cost-effective way to establish 40 Gigabit link.Cable length: 3.28'.Connections: QSFP+ male on first end and QSFP+ male on second end.Connectivity: Wired.Has 30 AWG copper conductor for superior conductivity.Meets IEC60825-1, UL #E116441 Compliant, ELV Compliant, CFR 21Section 1040, RoHS-6 standards and certifications.Data transfer rate: 40 Gbps.Comes in tangerine color.Suitable for use with Cisco 40GBASE-SR4 QSFP+ copper module

Aruba delivers secure edge-to-cloud solutions that use AI and machine learning to make things simpler, faster, and more automated for IT, while harnessing data to drive powerful business outcomes. The world's largest companies rely on Aruba to provide a secure, AI-powered edge services platform that spans across campus, branch, data center, and remote working environments for a single operational experience..10Gbps SFP+ to SFP+ direct attach copper cable.Comes in orange and silver.Cable length: 3.3'

Cisco QSFP to QSFP copper direct-attach cable are suitable for very short links and offer a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of Cisco switches within racks and across adjacent racks. Made of copper materials and comes in brown with 3m length..QSFP to QSFP cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 3m.Direct attach assemblies with QSFP-100G connectors.Made of copper and comes in orange.Maximum data transfer rate: 100 Gbps

Cisco QSFP to QSFP copper direct-attach cable are suitable for very short links and offer a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of Cisco switches within racks and across adjacent racks. Made of copper materials and comes in brown with 1m length..QSFP to QSFP cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 1m.Direct attach assemblies with QSFP-100G connectors.Made of copper and comes in brown.Maximum data transfer rate: 100 Gbps

For use in 10Gbps ethernet and fibre channel applications..SFP+/SFP+.Fully compliant to MSA SFF-8431 specification.3.28'.Connector on first end: 1 x SFF-8431 male SFP+.Connector on second end: 1 x SFF-8431 male SFP+.Conductor: Copper.Reach: 1 m.Equivalent to Cisco SFP-H10GB-CU1-5M.100 ohm twinaxial cable, diecast metal shells, pull-to-release latching.Support for 1x, 2x, 4x and 8x fiber channel data rates.Device supported: Network device.Designed for: Cisco Catalyst 2960, 2960-24, 2960-48, 2960G-24, 2960G-48, 2960S-24, 2960S-48.Hot pluggable SFP 20pin footprint.Low power consumption, intended application 10Gbps hardware interconnection.Package includes: 1 m 30 AWG SFP+ high speed passive copper 10Gbps cable, System requirements: SFP+ Direct Attach Cable ( DAC ) twinaxial cables conform to SFF-8431 standards.Green Compliant: Yes, Green Compliance Certificate/Authority: RoHS.Warranty: Lifetime limited

HPE Aruba Direct Attach Copper Cable - 25GBase direct attach cable - SFP28 to SFP28 - 10 ft - for HPE Aruba 8325-48Y8C.This cable is perfect for connecting your data devices.Cable length: 9.84'.; (Male to Male).Meets or exceeds TAA and MSA standards

Cisco QSFP to QSFP copper direct-attach cable are suitable for very short links and offer a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of Cisco switches within racks and across adjacent racks. Made of copper materials and comes in brown with 5m length..QSFP to QSFP cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 5m.Direct attach assemblies with QSFP-100G connectors.Made of copper and comes in orange.Maximum data transfer rate: 100 Gbps

HPE Aruba Direct Attach Copper Cable - 10GBase direct attach cable - SFP+ (M) to SFP+ (M) - 10 ft - twinaxial - passive - for HPE Aruba 2540 48G, 2930F 24G, 2930F 48G, 2930M 24, 8320, 8325-48Y8C.This cable is perfect for connecting your data devices.Cable length: 9.84'.; (Male to Male).Features: passive cable

The Cisco™ SFP-10G-AOC7M= 10GBase-AOC SFP+ to SFP+ fiber optic direct attach cable in blue color, offers connection within racks and across adjacent racks. The 22.97' direct attach cable with copper media, supports network devices..Twinaxial direct attach cable is perfect for signaling applications.Cable length: 22.97'.Color: Blue.Connectors: One SFP+ on both the ends.Device supported: Network device.Ethernet technology: 10 Gigabit Ethernet.Transceiver type: AOC.Media: Copper.Meets GR-20-CORE, GR-326-CORE, GR-1435-CORE, ITU-T G.709, IEEE 802.3, ITU-T G.975, ITU-T G.975.1, RoHS certifications and standards

StarTech.com 0.5m 10G SFP+ to SFP+ Direct Attach Cable for Cisco SFP-H10GB-CU0-5M 10GbE SFP+ Copper DAC 10Gbps Passive Twinax.100% Cisco SFP-H10GB-CU0-5M compatible 10G direct attached cable.0.5m/1.6' Cable | 10 Gbps | Passive Twinax (Copper) | 2x SFP+ Pluggable Connector | 100 Ohm Impedance | 30 AWG | PVC Jacket.10GbE Low Power Mini GBIC/Transceiver Module DAC for edge networks/server rooms/data centers.For Cisco switches Firepower | ASR9000 | ASR1000 | C9300 | C3850 | NCS540 | C9500.Hot-Swappable and MSA Compliant.Copper SFP+ Cable | 10 Gbps | Passive DAC | Lifetime Warranty

Cisco SFP28 to SFP28 copper direct-attach 25GBASE-CR1 cables are suitable for very short links and offer a highly cost-effective way to establish a 25-Gigabit link between SFP28 ports of Cisco switches within racks and across adjacent racks. The Cisco® 25GBASE SFP28 (Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications. The 25G Modules are based on SFP28 form factor..vPassive copper direct-attach cable is suitable for very short links and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 9.84'.Features SFP28 to SFP28 connectors (male to male).Interoperable with other IEEE-compliant 25GBASE-CR interfaces where applicable.Does not require FEC on the host ports.Maximum data transfer rate: 25000Mbps.5-year manufacturer limited warranty.Certified and tested on Cisco SFP28 ports for superior performance, quality, and reliability.High-speed electrical interface compliant to IEEE 802.3by

Cisco SFP28 to SFP28 copper direct-attach 25GBASE-CR1 cables are suitable for very short links and offer a highly cost-effective way to establish a 25-Gigabit link between SFP28 ports of Cisco switches within racks and across adjacent racks..Passive copper direct-attach cable is suitable for very short links and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 6.56'.Features SFP28 to SFP28 connectors (male to male).Comes in brown.Do not require FEC on the host ports.Maximum data transfer rate: 25000Mbps.5-year manufacturer limited warranty.Features SFP28 cable type to better accommodate your precise requirements with maximum productivity.Fully compatible with switches

HPE X142 - 40GBase direct attach cable - QSFP+ to QSFP+ - 10 ft - for HPE Aruba 2930M 24 Smart Rate POE+ 1-Slot, 8325-32C, 8325-48Y8C.This cable is perfect for connecting your data devices.Cable length: 9.84'.(Male to Male)

Cisco SFP28 copper direct-attach cables are suitable for very short links and offer a highly cost-effective way to establish a link between the SFP28 ports of Cisco switches within racks and across adjacent racks..Cable length: 16.4'.Comes in black.Meets or exceeds MSA SFF-8472, ELV, RoHS 6/6, and SFF-8402/IEEE 802.3by standards.1-year manufacturer limited warranty