Direct Attach Cable (DAC)

Dell EMC DAC-SFP-10G-1M Compatible 1m 10G SFP+ to SFP+ Direct Attach Cable Twinax - 10GbE SFP+ Copper DAC 10 Gbps Low Power Passive Mini GBIC/Transceiver Module DAC (DACSFP10G1M).100% DELL EMC DAC-SFP-10G-1M COMPATIBLE DAC: 10G direct attach cable works with Dell EMC switches and is MSA compliant.LIFETIME WARRANTY: Backed by a lifetime warranty on the life of the module itself, not the life of your switch; our modules won't void your OEM warranty and supported by our Tech Advisors 5/24.TECHNICAL SPECS: 1m (3.3ft) | 10 Gbps | Passive Twinax (Copper) | 2 x SFP+ Pluggable Connector | 100 Ohm Impedance | 30 AWG Wire Gauge | PVC Cable Jacket | Hot swappable | MSA Compliant.TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in Dell EMC routers and switches.WORKS WITH MSA COMPLIANT SWITCHES: Low power 10GbE DAC also works with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link and more that accept uncoded modules and transceivers.10 Gbps | Passive Copper Cable | 1 m (3.3ft) | Lifetime Warranty

Dell EMC DAC-SFP-10G-2M Compatible 2m 10G SFP+ to SFP+ Direct Attach Cable Twinax - 10GbE SFP+ Copper DAC 10 Gbps Low Power Passive Mini GBIC/Transceiver Module DAC (DACSFP10G2M).100% DELL EMC DAC-SFP-10G-2M COMPATIBLE DAC: 10G direct attach cable works with Dell EMC switches and is MSA compliant.LIFETIME WARRANTY: Backed by a lifetime warranty on the life of the module itself, not the life of your switch; our modules won't void your OEM warranty and supported by our Tech Advisors 5/24.TECHNICAL SPECS: 2m (6.6ft) | 10 Gbps | Passive Twinax (Copper) | 2 x SFP+ Pluggable Connector | 100 Ohm Impedance | 30 AWG Wire Gauge | PVC Cable Jacket | Hot swappable | MSA Compliant.TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in Dell EMC routers and switches.WORKS WITH MSA COMPLIANT SWITCHES: Low power 10GbE DAC also works with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link and more that accept uncoded modules and transceivers.10 Gbps | Passive Copper Cable | 2 m (6.6ft) | Lifetime Warranty

The Dell™ 470-AAVJ direct attach twinaxial networking cable of 9.84' long, provides 10 GbE SFP+ connectivity. This cable is perfect for use with your Dell N4000 series, N-series, PowerConnect 6224, 6224F and 6224P..Direct attach twin axial network cable is perfect for network device.Cable length: 9.84'.Copper conductor.Compatible with DELL NETWORKING N4000 series N4032, N4032F, N4064F, DELL NETWORKING N-Series N2024P, N3024, N3024P, N3048, PowerConnect 6224, 6224F.Connector on first end: 1 x SFP+ male.Connector on second end: 1 x SFP+ male.Technology: Twin axial

This SFP-H10GB-CU3M-AO 10GBase-CU SFP+ to SFP+ direct attach cable from AddOn is simple to use and programmable to work according to user requirements. This 30 AWG copper cable is uniquely serialized, application-tested and data-traffic tested to assure that it will initialize and function uniformly. It supports Gigabit Ethernet technology for quick data transfer..Passive twinaxial direct attach cable is ideal to use with networking devices.Dimensions: 9.84' L.Compatible with Cisco 500 Series Stackable Managed Switch SF500-24, SF500-24P, Catalyst 2960-S Series WS-C2960S-24PD-L and WS-C2960S-24TD-L.Has copper conductor for superior electrical conductivity.Features SFP+ interface for connecting networking devices.Supports Gigabit Ethernet technology for quick data transfer.Wire gauge: 30 AWG.Meets MSA, TAA Compliance.Weight: 2.4 oz..Comes with lifetime limited warranty.The AddOn 10GBase-CU SFP+ to SFP+ direct attach cable for Cisco SFP-H10GB-CU3M works over passive copper with a maximum reach of 9.84'.

HPE Aruba Direct Attach Copper Cable - 25GBase direct attach cable - SFP28 to SFP28 - 10 ft - for HPE Aruba 8325-48Y8C.This cable is perfect for connecting your data devices.Cable length: 9.84'.; (Male to Male).Meets or exceeds TAA and MSA standards

Aruba delivers secure edge-to-cloud solutions that use AI and machine learning to make things simpler, faster, and more automated for IT, while harnessing data to drive powerful business outcomes. The world's largest companies rely on Aruba to provide a secure, AI-powered edge services platform that spans across campus, branch, data center, and remote working environments for a single operational experience..10Gbps SFP+ to SFP+ direct attach copper cable.Comes in orange and silver.Cable length: 3.3'

HPE Aruba Direct Attach Copper Cable - 10GBase direct attach cable - SFP+ (M) to SFP+ (M) - 10 ft - twinaxial - passive - for HPE Aruba 2540 48G, 2930F 24G, 2930F 48G, 2930M 24, 8320, 8325-48Y8C.This cable is perfect for connecting your data devices.Cable length: 9.84'.; (Male to Male).Features: passive cable

StarTech.com 0.5m 10G SFP+ to SFP+ Direct Attach Cable for Cisco SFP-H10GB-CU0-5M 10GbE SFP+ Copper DAC 10Gbps Passive Twinax.100% Cisco SFP-H10GB-CU0-5M compatible 10G direct attached cable.0.5m/1.6' Cable | 10 Gbps | Passive Twinax (Copper) | 2x SFP+ Pluggable Connector | 100 Ohm Impedance | 30 AWG | PVC Jacket.10GbE Low Power Mini GBIC/Transceiver Module DAC for edge networks/server rooms/data centers.For Cisco switches Firepower | ASR9000 | ASR1000 | C9300 | C3850 | NCS540 | C9500.Hot-Swappable and MSA Compliant.Copper SFP+ Cable | 10 Gbps | Passive DAC | Lifetime Warranty

The HPE Aruba JL487A is a 25G 0.65m direct attach cable with SFP28 to SFP28 connectors and specifically designed for HPE Aruba 8325 series switch..Cable length: 2'.Comes in black.SFP28 to SFP28 connectors

Cisco QSFP-H40G-CU5M 40GBASE-CR4 16.4' QSFP Direct-attach copper cable with channels offers uninterrupted signal transmission with 40 gigabit QSFP+ transceiver. Channels are easily broken out to four separate 10 gigabit SFP+ transceivers. The QSFP copper cable offers secure connection to the electrical circuitry of the system with either a copper or an optical external network. Transceiver is perfect for switches, routers and data center equipments to offer higher density..Twinaxial cable for easy signal transmission.Comes in gray color for new look.Has cable length of 16.4' for convenience.Supports network device to connect computers or other electronic devices together and provides copper conductors for high conductivity.Has 1 x QSFP+ connector on first end and 1 x QSFP+ connector on second end for flexibility.Has operating temperature range of 32 - 158 deg F for precise operation.Meets RoHS compliance.Flexibility of interface choice.Hot-swappable input/output device that plugs into a 40-Gigabit Ethernet QSFP+ ethernet switch port.Support for 40GBASE Ethernet.Operating temperature: 32 - 158 deg F.Designed for Cisco Catalyst 3016.Cisco 40GBASE-CR4 16.4' QSFP Direct-attach copper cable has hot-swappable form factor with 4 optical transmit and receive channels. Optical fiber offers easy signal transmission.

The Cisco 3.28' tangerine direct attach copper cable has QSFP+ male connector on first end and QSFP+ male connector on second end for enhanced connectivity. It features 30 AWG copper conductors for better conductivity. This copper cable is compatible with Cisco 40GBASE-SR4 QSFP+ copper module. It is perfect for short distances and provides a high cost-effective way to establish a 40-Gigabit link between QSFP+ ports of Cisco switches within racks and across adjacent racks..Direct attach copper cable is a cost-effective way to establish 40 Gigabit link.Cable length: 3.28'.Connections: QSFP+ male on first end and QSFP+ male on second end.Connectivity: Wired.Has 30 AWG copper conductor for superior conductivity.Meets IEC60825-1, UL #E116441 Compliant, ELV Compliant, CFR 21Section 1040, RoHS-6 standards and certifications.Data transfer rate: 40 Gbps.Comes in tangerine color.Suitable for use with Cisco 40GBASE-SR4 QSFP+ copper module

Juniper® EX-SFP-10GE-DAC-5M Network cable has SFP+ passive twinax connector type for reliable operation. With 16.4' long, this cable has copper conductor for high conductivity. This cable with supply voltage of 3.3 V consumes a power of 0.57 W and has characteristic impedance of 100 Ohms. Hot-removable cable allows you to disrupt the cable without powering OFF the switch. Deployed with full-duplex serial transmission, cable transfers at a speed of 10 Gb/s..Twinax cable for easy signal transmission.Compatible with Juniper Networks EX2500 ethernet switch.Has cable length of 16.4' for convenience.Has supply voltage of 3.3 V for optimum device performance.Provides copper conductors for high conductivity.Has SFP+ connector on first end that provides highest flexibility for network.Has 10- Gb/s full-duplex serial transmission data transfer rate and wire accommodates a size of 24 AWG.Has minimum cable bend radius of 1", cable characteristic impedance of 100 Ohms and 2% maximum crosstalk.Has power supply of 0.57 W for improved reliability.Has storage temperature of -40-85 deg C for precise operation.Time delay: 1.31 nsec/ft.Rate: 10 Gb/s full-duplex serial transmission.Connector type: SFP+ passive twinax cable assembly.Wire AWG: 24 AWG.Minimum cable bend radius: 1".Juniper® SFP+ Ethernet attach copper twinax cable of 16.4' long works at a data transfer speed of 10 Gb/s. Reduces crosstalk between pairs and accommodates wire of 24 AWG.

For use in 10Gbps ethernet and fibre channel applications..SFP+/SFP+.Fully compliant to MSA SFF-8431 specification.3.28'.Connector on first end: 1 x SFF-8431 male SFP+.Connector on second end: 1 x SFF-8431 male SFP+.Conductor: Copper.Reach: 1 m.Equivalent to Cisco SFP-H10GB-CU1-5M.100 ohm twinaxial cable, diecast metal shells, pull-to-release latching.Support for 1x, 2x, 4x and 8x fiber channel data rates.Device supported: Network device.Designed for: Cisco Catalyst 2960, 2960-24, 2960-48, 2960G-24, 2960G-48, 2960S-24, 2960S-48.Hot pluggable SFP 20pin footprint.Low power consumption, intended application 10Gbps hardware interconnection.Package includes: 1 m 30 AWG SFP+ high speed passive copper 10Gbps cable, System requirements: SFP+ Direct Attach Cable ( DAC ) twinaxial cables conform to SFF-8431 standards.Green Compliant: Yes, Green Compliance Certificate/Authority: RoHS.Warranty: Lifetime limited

Cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks..Yellow.Twinaxial SFP+ male/SFP+ male.8.2'.Material: Polycarbonate connector, polyvinyl chloride (PVC) jacket, Gauge: 30 AWG.Conductor: Copper.Power: 1 W consumption, Temperature: 0 - 70 deg C commercial range, -40 - 85 deg C storage range.Supports network devices.Compliant and standards: SFP+ MSA SFF-8461, UL #E116441, ELV, RoHS.Weight: 75 g.Compatibility: Cisco catalyst switch: 2960-24LC-S, 2960-24PC-L, 2960-24PC-S, 2960-24TC, 2960-24TC-L, 2960-24TC-S, 2960-48PST-L, 2960-48PST-S, 2960-48T, 2960-48TC, 2960-48TC-L, 2960-48TC-S, 2960-8TC, 2960-8TC-S, 2960G-24TC, 2960G-48TC, 2960G-8TC.Warranty: 90 days limited

HPE Aruba 10 ft 50GBase direct attach cable (SFP56 to SFP56). Designed for HPE Aruba 6300F, 6300M, 6405 48SFP+ 8SFP56, 6405 96G CL4 PoE 4SFP56, 6405 Switch Bundle, 6410 Switch Bundle..10' 50GBase direct attach cable.SFP56 to SFP56.Designed for HPE Aruba 6300F, 6300M, 6405 48SFP+ 8SFP56, 6405 96G CL4 PoE 4SFP56, 6405 Switch Bundle, 6410 Switch Bundle.Black

Cisco™ 2 m twinax cable for 10GBASE-CU SFP+ allows to have point-to-point in-rack and across rack network switch/server connections. Cable offers low power consumption with 0.5 W for superior performance and has 30 AWG, 100 ohm impedance..Twinaxial.Connector: 1 x SFF-8431 SFP+ first end, 1 x SFF-8431 SFP+ second end.6.56'.Brown.Conductor: Copper.Compatibility: Cisco 2960-24LC-S, 2960-24TC-L, 2960-48T, 2960-8TC, 2960S-24PD-L, 2960S-48FPD-L, 2960S-48LPS-L and 2960S-48TS-S catalyst switches.Power consumption: 1 W.Temperature: 0 to 70 deg C operating.Dimensions: 8.5 mm(H) x 13.4 mm(W) x 56.5 mm(D).Features smallest 10G form factor.Hot swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch.Provides flexibility of interface choice, supports pay-as-you-populate model, supports digital optical monitoring capability.Supports the Cisco quality identification (ID) feature that enables a Cisco switch to identify whether the module is certified and tested by Cisco.Supports 10GBase Ethernet and OTU2/OTU2e.Complaints and standards: RoHS.Warranty: 90 days limited.Cisco™ 2 m Twinax 10GBASE-CU SFP+ cable supports multi-gigabit data rates up to 10.5 Gb/s and is hot-swappable with fiber optic modules.