Electronic Tone Generators

Analog tone and probe is the best choice for toning and tracing wire on non-active networks, and specifically for identifying individual pairs with SmartTone technology..Interfaces/ports: Tone mode, 1 x RJ 11.Material: Copper.Storage temperature: 40 - 158 deg F.Humidity range operating: 5 - 95% (non condensing).Connectors: BNC, RJ 11.Output voltage level in continuity mode: 8 Vdc with fresh battery, over voltage protection: 60 VDC in toner/polarity mode.Frequency: 1000/1500 Hz nominal, battery: 9 V alkaline.On/off push button.Loud large speaker amplifies tone through walls, enclosure, wood or plaster.Tests, tools and measurements: Toning.Quick twist tip for easy replacement, easy to use adjustable volume control dial.Includes: analog toner, probe.Application/usage: Cable testing.SmartTone provides five distinct tones for exact pair identification.Loud tones can be send up to 10 miles (16 kilometers) on most cables, this tone change you hear through the probe positively verifies the correct wire pair.Warranty: 18 months limited.Fluke Networks Pro3000 Series Analog Tone and Probe Kit - Identify Inactive Lines Fast

The Fluke Networks® JackRapid™ JR-LEV-2 patented jack termination tool is compatible with Leviton 61110, 5G110 and 6110G. The ergonomically designed handle reduces hand fatigue and offers easy, one-handed operation. It seats and cuts all wires at once and offers high quality, consistent terminations. The tool has replaceable blade head for use with multiple jack types..Fast answers: JackRapid allows you to terminate jacks eight times faster than traditional impact tools with accuracy that''s unmatched.Patented jack termination tool seats and terminates all wires simultaneously.Built in blade cuts off the excess wire after it is seated in the connector, eliminating the need for a secondary trim step.Simple, one handed operation, with an ergonomically designed handle, reduces hand fatigue.Additional information: Replaceable blade head for use with multiple jack types, for leviton 61110, 5G110, 6110G.Unique design easily acco mmodates close to wall installation.Application/usage: Cable termination.Compatibility: PC.Warranty: 18 months limited.Fluke Networks JackRapid Termination Tool - Saves Time

The Fluke LinkIQ cable+network tester is the solution to verify cable performance up to 10G and solve network connectivity problems. LinkIQ validates cable performance using frequency-based measurements to calculate maximum bandwidth (10BASE-T to 10GBASE-T), which ensure that tested links meet performance requirements. LinkIQ also performs ping tests to verify connectivity and provides nearest switch diagnostics including advertised data rate, switch name, IP address, port number and VLAN information, plus PoE testing and load test up to Class 8 (90 W). Ethernet Alliance PoE Certified for reliable multivendor interoperability. Additional features include: Cable Toning, Port Blink, Remote Office Locators, and the ability to manage results via LinkWare PC. Includes LinkIQ main unit, remote ID #1-7, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, IntelliTone(TM) Pro 200 Probe, and duffel bag carrying case..This cable and network tester is the solution to verify cable performance up to 10G and solve network connectivity problems.Includes Remote ID #1-7, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, IntelliTone Pro 200 Probe, and duffel bag carrying case.Works on a 3.6V 6400mAh lithium-ion battery.Host interface: USB Type-C.Validate cable performance up to 10GBASE-T via frequency-based measurements.Get connected switch data rate, switch name, IP address, port number, and VLAN.Detect the PoE class (1-8) and power, and perform a load test.Test connectivity to TCP/IP network through IP configuration and ping.Cable diagnostics including length plus IntelliTone, remotes 2-8.Manage results and print reports from LinkWare PC

The Fluke LinkIQ is capable of measuring lengths up to 1000' and provides distance to faults such as opens, shorts, and unterminated cable. The included MS-IE remote adapter identifies miswires and split pairs on RJ45, M12X, M12D, and M8D terminated cables. The LinkIQ qualifies cabling performance from 10 Mb/s to 10 Gb/s for EtherNet/IP, PROFINET, EtherCAT and other Industrial Ethernet protocols, performs ping tests to verify connectivity and also provides nearest switch diagnostics including advertised data rate, switch name and port number and VLAN information, plus PoE and load testing up to Class 8 (90W). Ethernet Alliance PoE Certified for reliable multivendor interoperability. Includes LinkIQ main unit, Remote ID #1-7, IntelliTone Pro 200 Probe, RJ45-RJ45 patch cord (M-F), RJ45-RJ45 patch cord (M-F), Quick Reference Guide, AC charger, RJ45/11 universal coupler, RJ45/M12X patch cord, RJ45/M12D patch cord, RJ45/M8D patch cord, RJ45/11 modular adapter, hanging strap with remote ID holder, and duffle bag carry case..This cable and network tester is capable of measuring lengths up to 1000' and providing distance to fault analysis (opens, shorts, and unterminated cable).Includes remote ID, RJ45-RJ45 patch cord, RJ45-RJ45 patch cord (M-F), AC charger, RJ45/11 universal coupler, RJ45/M12X patch cord, RJ45/M12D patch cord, RJ45/M8D patch cord, RJ45/11 modular adapter.Works on a 3.6V 6400mAh lithium-ion battery.Host interface: USB Type-C.Validate EtherNet/IP, PROFINET, EtherCAT cable performance up to 10GBASE-T.Get connected switch data rate, name, IP address, port number, and VLAN.Detect the PoE class (1-8) and power, and perform a load test.Test connectivity to TCP/IP network through IP configuration and ping.Cable diagnostics including length plus IntelliTone, remotes 2-8.Manage results and print reports from LinkWare PC

Overview Introducing the new LinkRunner 10G, the most cost-effective solution for 10 Gig network testing. LinkRunner 10G simplifies testing and configuration of copper and fiber Ethernet networks, streamlining workflows by combining essential functions of installation and triage in a single, ruggedized unit. This next-generation Android-based tester delivers complete network validation and troubleshooting, from the media (copper/fiber) to the application (layers 1 - 7), accelerating deployments, speeding problem identification, and improving the efficiency and effectiveness of network installers and operations teams..Used for validating Ethernet cabling, Multi-Gig/10G connectivity, PoE delivery, and fiber network performance..Package Contents: LinkRunner LR10G-100 tester, AllyCare Support (1 year), power adapter, holster, two SFP+ modules (10G850 & 10G1310), RJ-45 inline coupler, WireView 1–6 identifiers, quick start guide, and medium soft case..Battery powered for portable, all-day network testing in the field..Equipped with RJ-45 ports for LAN and cable testing, SFP+ slot for fiber diagnostics, USB-A and USB-C ports for data and power, microSD slot for storage expansion, 3.5mm audio jack for audio output, and POGO pin connector for docking accessories..Designed to operate reliably between 32°F and 122°F in typical field environments.

The Tripp Lite Mini Stereo Audio Male to Male Dubbing Cable, 3 ft., is for microphones, speakers, headphones and other audio devices. It is perfect for use with mobile devices such as an iPod, iPhone or MP3 player. The gold-plated connectors ensure excellent conductivity..Connects mini stereo audio equipment.Perfect for use with mobile devices.Molded cables with built-in strain relief.Gold-plated connectors ensure excellent conductivity.3 ft..Certification and Standards: RoHS

The Tripp Lite T100-001 black/blue crimping tool with cable stripper, strips flat and round cable. It terminates 4-wire RJ11, 6-wire RJ12 and 8-wire RJ45 modular plugs. This crimping tool has easy-grip handle for added grip..RJ11/RJ12/RJ45 crimping tool with cable stripper for reliable operation.Comes in black/blue color.Terminates RJ11, RJ12 and RJ45 modular plugs.Strips flat and round cable.Sturdy construction for long life.Easy-grip handle feels comfortable in your hand.Contains quick start guide.RoHS and Green compliant.Comes with 1 year limited warranty

Fluke Networks? Pro3000™ Analog probe is easy-to-use with adjustable volume control dial and "quick-twist" tip for easy replacement. Probe features recessed on/off button that helps prevent accidental turn on when placed in the pouch..Interfaces/ports: RJ-45.Tone and trace wire on non-active networks.SmartToneTM technology provides five distinct tones for exact pair identification.Sends loud tone up to 10 miles (16 kilometers) on most cables.Loud speaker on Probe makes the tone easier to hear through drywall, wood, and other enclosures.Angled bed-of-nails clips allow easy access to individual pairs.RJ-11 connector is ideal for use on telephone jacks.Attach nylon pouch (included in kit) to your belt for easy transport.Battery: 9 V alkaline.Case dimensions: 2.7" x 2.4" x 1.4".Analog prob user interface: On/off pushbutton, volume dial, Replaceable tip, 3.5mm earphone jack.Solid Frequency: 1000 Hz nominal, alternating frequency: 1000/1500 Hz nominal, over voltage protection: 60 VDC in toner/polarity node.Output power in tone mode: 8 dB min to 600 Ohms.Output voltage level in continuity mode: 8 VDC with fresh battery.Fluke Networks® Pro3000™ Analog probe features a loud large speaker that amplifies the tone through walls, enclosure, wood or plaster and uses alkaline battery.

Monoprice® 100 W Speaker volume controller in white color accepts wires ranging from 14 - 16 ga and can be easily mounted on the wall. Controller has impedance ratings of 4-16 Ohms and can be adjusted to one of the 12 positions..Rotary-type volume control for speaker systems.Wall plate mounts into a standard single-gang, low-voltage wall bracket.Volume control features removable connectors that accept upto 14 gauge wire for ease of installation.Rotary control can be set to one of twelve positions, including the minimum (off) and maximum volume settings.Frequency range: 35 Hz - 20 kHz.Input: 2 channels, Output: 2 channels, 4 to 16 Ohms impedance matching.RMS power: 100 W.Material: ABS plastic.Dimensions: 2 3/4"(D), white.Application/usage: Home theater.Monoprice® 100 W Speaker volume controller in white color has a simple rotary design that allows user to set the perfect listening level and provides frequency response ranging from 35 Hz- 20 kHz.

Bring people together. Launch huge ideas. And make sure everyone at the table is heard, near or far, with Poly signature audio. NoiseBlockAI technology makes unwanted noise a thing of the past: Speech flows naturally without interruptions. Pro-designed expansion microphones deliver brilliant audio, even for CEO-ego-sized conference rooms. Best of all, it's insanely easy to use, whether you're using for audio conferences or pairing it with a Poly video room solution. Launch and join meetings with one finger. And the Trio C60 conference phone plays nicely with all your favorite collaboration platforms. Simple, powerful, accessible, and clear..Smart conference phone for any meeting space.Up to three lines (max. one Skype for Business).Call handling features: shared call/bridged line appearance; distinctive incoming call treatment/call waiting; call timer and call waiting; call transfer, hold, divert (forward), pickup; called, calling, connected-party information; one-touch speed dial and meeting join; local five-way audio conferencing, daisy-chain up to three, do-not-disturb function; local configurable digit map/dial plan; corporate directory access using LDAP; visual conference management.5" color LCD (720 x 1280 pixel) multitouch-capable capacitive touch screen.Three multi-colored mute indicators and three sets of capacitive touch volume and mute buttons.Supports USB, Bluetooth or IP connectivity to mobile devices.Enhance collaboration with Poly signature audio for natural conversations.Intelligently removes distracting non-speech noise while allowing your voice be heard.All new design with fabric covering, light base, and cable management (USB/LAN/HDMI) underneath and up to 4x faster performance.Three MEMS microphones for 360 degree mic pick up with up to 20' range.Package includes: Trio C60 conference phone, 25' network cable CAT 5e, setup sheet.1-year manufacturer limited warranty

The most essential tools for electrical and telecom technicians in our sleek form-fitting PVC dur-a-grip tool pouch - holds your tools securely inside, even upside down..All the tools you need (in one pouch) to cut, strip, clean and make connections.Application/usage: Six tool kits combinations available for a multitude of applications.Easy to use cable stripper quickly rings and slits many types of cable.Use the probe pic to check for loose or damaged connections.D914 and D814 industry standard punchdown tools make for solid terminations.All kits include ergonomically designed Dur a Grip pouch for convenient tool storage on belt.Cut and strip wire cleaner and faster with the electricians D snips.Includes: D814 impact tool, electricians D Snips, cable stripper, Eversharp 66/110 cut blade, probe pic, carrying case.Fluke Networks Pro-Tool Kit - Six Tools in One Place

Unity 200-Watt Bridgeable Power Amp.Comfortable Key Action.Ideal key layout.Simple Wired Operation.1 year replacement warranty

Efficient and reliable, the Tripp Lite N002-014-BK CAT-5e Cable is a great option for Ethernet network connections between a computer system and a router, switch or hub. Both ends of this networking cable are fitted with RJ-45 male connectors for smooth transfer of signals. Its PVC jacket properly insulates the copper conductor and is flexible, reducing the possibility of cable damage..Capable of transmitting data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.14' CAT-5e allows convenient tethering.Comes with a lifetime limited warranty.The Tripp Lite N002-014-BK 14' CAT-5e Patch Cable, Black, is ideal for 1000 Mbps networks and provides dependable data transfer.

The most essential tools for electrical and telecom technicians in our sleek form-fitting PVC dur-a-grip tool pouch - holds your tools securely inside, even upside down..All the tools you need (in one pouch) to cut, strip, clean and make connections.Application/usage: Six tool kits combinations available for a multitude of applications.Easy to use cable stripper quickly rings and slits many types of cable.Use the probe pic to check for loose or damaged connections.D914 and D814 industry standard punchdown tools make for solid terminations.All kits include ergonomically designed Dur a Grip pouch for convenient tool storage on belt.Cut and strip wire cleaner and faster with the electricians D snips.Includes: IS50 with D914S impact tool, D snips, cable stripper, eversharp 66/110 cut blade.Fluke Networks Pro-Tool Kit - Tools and Storage in One

Get the most out of your home audio system with high quality, oxygen-free, pure bare copper speaker wire from Monoprice! This speaker wire features two conductors made of high purity (greater than 99.95% pure), oxygen-free bare copper. Pure Bare Copper is a superior conductor to the copper clad aluminum (CCA) conductors used in most other inexpensive speaker wire. CCA is only about 68% as conductive as pure bare copper. This additional resistance is added to the impedance of your speakers and can negatively effect the sound. For the wire to have no audible effect, the total wire resistance should be no more than 5% of the lowest impedance of your speakers. Even speakers rated for a nominal 8-ohms, may dip to as low as 4-ohms at some frequencies, which further reduces the total cable resistance allowed in the wire. Using Pure Bare Copper speaker wire ensures that the total load put on the amplifier remains as close as possible to the impedance curve of your speakers. For example, a 16AWG 2-conductor Pure Bare Copper speaker wire has a total resistance of 0.803 ohms per 100 feet (both directions must be considered). By comparison, a 16AWG 2-conductor CCA speaker wire has a total resistance of 1.181 ohms per 100 feet. Assuming 4 ohms is the lowest impedance of your speakers, a speaker wire run can be no more 0.2-ohms total. 20 feet of 16AWG Pure Bare Copper would be 0.1606 ohms, well under the 0.2-ohm limit. On the other hand, 20 feet of 16AWG CCA would be 0.2362 ohms, well OVER the 0.2-ohm limit. One side of the clear outer PVC jacket is marked with an easily visible blue stripe to indicate polarity..Supports advanced features for enhanced connectivity and clarity.Durable build ensures long-lasting reliability in any setup.Flexible design simplifies installation and saves space

CAT-6 for efficient data transfer across a network.Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.3' CAT-6 for easy tethering.Comes with a lifetime limited warranty