Ethernet to Serial Servers

Brainboxes ES-246 Ethernet to serial adapter has high efficiency data transfer rate of 1000000 baud that is apt to couple with 1 Mbps line drivers for significant operation. The adapter with COM ports is perfect for accessing through TCP and IP sockets from any networked device such as an Android tablet, PC or phone. Requires input power of 5 - 30 VDC. Provides simple and instant-networked serial ports for aiding in effortless usage. Compatible with Microsoft Windows 7 32 bit & 64 bit, Windows Server 2008, Windows Vista, Windows XP and Microsoft Windows 2000 operating systems..Ethernet to serial device server for use in multiple software purposes.Measures 1.1" H x 4" W x 3.9" D.RS232 port for external interface.DB9 9-pin male connector for better connectivity.Offers a 256 FIFO size for transmitting and 32 FIFO size for receiving.EIA - RS232 standard transmits data over a long distance.Fast Ethernet technology for LAN or MAN connection.Transfers 1000000 bits for increased serial data speed.Odd or even parity detects whether the value of any bits has been altered.Tx/Rx modes for point-point communication.4 PCB layers eliminates operator wiring errors.Serial port tunneling allows serial cable replacement over any distance.Requires 5 - 30 VDC power input to operate.Works with Microsoft Windows 8 32, 64 bit Editions/7 32, 64 bit Editions/2000, Windows Server 2008 32 operating systems.Operates at a temperature of 0 to 55 deg C.Certifies to WEEE, RoHS standards.Weighs 0.114 kg.Comes with lifetime warranty enhances performance of your system.Brainboxes Ethernet to serial device server provides access to RS232 serial port and offers user-friendly performance. Perfect for use in multiple software applications.

Ethernet to Serial device server providing access to four RS422/485 serial ports. Data transfer rates up to 1,000,000 baud rates, coupled with 1Mbit/s line drivers deliver uncompromising performance. Our ES range provides simple instant networked serial ports. RS485 - 1 twisted pair - half duplex configuration with autogating provides trouble free data transmission due to automatic control of data direction. A web interface allows secure configuration and control of the serial ports over a local network or the internet using any browser. For Windows our in-house designed 32 bit and 64 bit driver gives you local COM ports, retaining existing software applications and allowing you to connect across your network to remote devices just as if they were attached locally. You can access the device via TCP/IP sockets from any networked device like an Android tablet, PC or phone. Serial Port Tunnelling individually configurable allows serial cable replacement over any distance, no software required. On Windows OS TCP/IP sockets are handled by the Winsock API, this will differ on other OSs..Network (RJ-45): Yes.Phone Line (RJ-11): No.Network (RJ-11): No

Brainboxes ES-522 Ethernet to serial device server meets the most demanding dynamic computing workloads. It delivers increased performance with the exceptional memory..Measures 4.7" x 0.9" x 3.9".Has 2 ports for easy connectivity.Supports 5, 6, 7 or 8 data bit characters, 1, 1.5 or 2 stop bits and odd, even, none, mark or space parity.Supports 1,000,000, Tx/Rx modes point to point, full duplex, half duplex autogating, hardware autogating data rates.Has XON/XOFF Software handshake or RTS/CTS hardware handshake types of flow control.The Ethernet Interface takes benefit of a company's pre-existing infrastructure.Supports protocols like software selectable as RS232, RS422/485 full duplex or RS485 half duplex, 4 PCB layers.Power supply is rated at typical 1.4 W, 60 mA, 24 V and maximum of 2.9 W.Includes an integrated DIN rail clip for mounting.Supports Microsoft Windows 8, Windows 7, Windows Server 2008, Vista, Server 2003, Windows XP, Linux OS.Meets AEO (C-TPAT), WEEE, RoHS, METL, FCC compliant, CE, Microsoft Certified Gold Partner certification and standards.Weighs 0.120 kg.Certifications and standards: Microsoft gold certified, RoHS, CE, TAA compliant.Weight: 0.12 kg.Operating system: Microsoft Windows 2000 Server, Microsoft Windows Vista (32/64 bits), Microsoft Windows 7 (32/64 bits), Microsoft Windows XP (32/64 bits), Microsoft Windows Server 2008 (32/64-bits), Microsoft Windows Server 2003 (32/64-bits).Warranty: Lifetime limited.Yellow.Brainboxes 2-Port Ethernet to serial device server is designed to with stand demanding environmental conditions.

The Brainboxes ES-457 2-port RS232 PoE Ethernet to serial device server with fast Ethernet technology is rail-mountable and features user-friendly interface that is simple to use and delivers powerful operation. It comes with serial port tunneling that allows serial cable replacement over any distance and supports data rate from 110 to 1000000 baud. It features point-to-point Tx/Rx modes and has DB9 9 pin male connector. This device server features EIA - RS232 standard operating distance and is compatible with Microsoft Windows 10/8/7/Server 2008/Vista/XP/2000 operating system..Drive server provides access to two RS232 serial ports.Dimensions: 1.1"H x 4"W x 3.9"D, 96.3 mm x 101 mm x 25 mm (with ears), 91.6 mm x 77 mm x25 mm (without ears).Connectivity: 10/100Base-TX Fast Ethernet.Requires Microsoft Windows 10, 8 - 32 bit & 64 bit Editions, Windows Server 2012, 7 - 32 bit & 64 bit Editions and Windows Server 2008 32/64 bit.Power supply: PW-800 optional global power supply, Power consumption: 1.85 W typical, Power input: Power over Ethernet OR 5 - 30V DC input.Meets CE, IP-30, TAA, Green compliant, RoHS and WEEE certifications & standards.Interface: Two RS232, Network (RJ-45) and PoE (RJ-45) port.Connector: DB9 connector - 9 pin male, Tx FIFO size: 256, Rx FIFO size: 32, Integrated connector.Operating distance: EIA - RS232 standard, Max baud rate: 1 MegaBaud, Data bits: 5 ,6 ,7 , 8, Parity: Odd, even, none, mark or space, Stop bits: 1 or 2.Power over Ethernet: IEEE 802.3af, PCB layers: 4, Mounting accessory: DIN-rail mounting kit - MK-048, Network protocols: ICMP, IP, TCP and UDP.Media type supported: Twisted pair, User friendly interface, simple to use, powerful in operation.Temperature: 0 - 60 deg C (operating), Humidity: 5 to 95 percent (non-condensing).Contains server, quick start guide, installation CD including manual, Microsoft signed drivers & utilities.Weight: 4.48 oz..Comes with lifetime warranty

Lantronix® Xdirect SGL port device comes with an c Ethernet port and serial cable, multiple power options. Port device provides a portable, extremely flexible and highly affordable network connectivity solution..Interfaces/ports: 10Base-T /100Base-T (auto-sensing), DB9F (DCE pinned).Dimensions: 9 1/2"(H) x 1.3"(W) x 1.1"(D).Modes: RS232, RS422* or RS485* (2 and 4 wire support).Baud rate: 300bps to 921.6 Kbps.Characters: 7 or 8 data bits, stop bits: 1 or 2.Parity: Odd, even, more.Control signals: CTS/RTS (hardware).Flow control: CTS/RTS, XON/XOFF.Connector: RJ45.Protocols: UDP, TCP, ARP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, Auto IP, HTTP, Telnet com port control.Power/status, link, activity, serial RX activity and TX activity.CPU: Based on DSTni-EX enhanced 16-bit x86 architecture.Memory: 256 KB SRAM, 1 MB flash.Input voltage: 5 V at mini-USB-B jack, input voltage: 5 - 15 VDC at DB9F pin 9.128/192/256-bit AES encryption.Environmental conditions: -40 - 85 deg C non-PoE models, -40 - 70 deg PoE model, humidity: 0% - 90% non-condensing.Weight: 0.15 lbs..Warranty: 5 years limited.Lantronix® Xdirect SGL port device is a compact serial-to- Ethernet device server and offers quick as well as easy Ethernet connectivity to virtually any device or machine with a serial interface.

Brainboxes 1 Port RS422/485 ethernet to serial rail-mount device server is compatible with Windows 2000/XP/Vista/7/8 OS. Server allows accessing the device via TCP/IP sockets from any networked device like an Android tablet, PC or phone..Media type supported: Twisted-pair.Max baud rate: 1,000,000 (1 MegaBaud), data bits: 5,6,7 or 8, parity: Odd, even, none, mark or space, stop bits: 1 or 2, flow control: RTS/CTS, XON/XOFF, Tx/Rx modes: Point to point, data transfer rate: 230.4 Kbps.OS required: Microsoft Windows 7 32 bit & 64 bit editions, Windows Server 2008 32 bit & 64 bit editions, Windows Vista 32 bit & 64 bit editions, Windows Server 2003 32 bit & 64 bit editions, Windows XP 32 bit & 64 bit Editions, Microsoft Windows 2000.Protocol: RS422/485, connector: DB9 connector - 9 pin male, Tx FIFO size: 4096, Rx FIFO size: 2048, operating distance: RS422/485 standard (4000 ft : 1200 meters).Ethernet technology: Fast Ethernet, network standard: 10/100Base-TX.Network/Transport protocol: TCP/IP, UDP/IP, ICMP/IP, BOOTP, DHCP, remote management protocol: Telnet, HTTP, status indicators: Port status, link activity, link OK.Interfaces: 1 x 100Base-TX - RJ-45.Form factor: Rail-mountable.Storage temperature: 0 to +55 deg C / +32 to +158 deg F.Power input: 5 - 30 VDC input, reverse polarity protected, power supply: 1 description Global power supply - PW-800, power consumption: 0.77W (Typical).Web interface allows secure configuration and control of the serial ports over a local network or the internet using any browser.Includes: 1 port RS422/485 Ethernet to serial adapter ES-320, installation CD including manual, Microsoft signed drivers & utilities, global power supply.Half-duplex configuration with autogating provides trouble-free data transmission due to automatic control of data direction.Certifications and standards: EMC: CE TAA, AEO C-TPAT, IEEE standards: 802.3, 802.3u, green compliance certificate/authority: RoHS, WEEE.Dimensions: 1.1"(H) x 4"(W) x 3.9"(D).Warranty: Lifetime limited.Brainboxes 1 Port RS422/485 ethernet to serial rail-mount device server offers data transfer rates up to 1000000 baud and has simple instant-networked serial ports.

The Brainboxes ES-413 Ethernet to serial device server provides local control for remote serial device. This device server is user friendly interface, simple to use and powerful in operation..Device server.Dimensions: 1.1"H x 3.9"W x 4"D.Comes in black color.Baud rate: From 110 - 1000000 baud, Data bits: 5, 6, 7 or 8.Data rate: 10/100 mega bits/second.Form factor: Rail-mountable.Interfaces/ports: 2 x serial port, DB9 connector - 9 pin male.Power supply: Power over Ethernet, 5 - 30 VDC input, reverse polarity protected.Ethernet technology: 100Base-TX fast Ethernet.Network protocols: ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, HTTP, RFC2217.OS compatibility: Communicate with Device over TCP from any OS / Microsoft Windows 8 32 bit 64 bit Editions / Windows Server 2012.User friendly interface, simple to use, powerful in operation.Serial port tunnelling allows serial cable replacement over any distance, no software required.Optional DIN rail mounting kit and stand alone power supply.Certifications and standards: AEO C-TPAT Microsoft Certified Gold Partner WEEE RoHS EMC: CE TAA.Weight: 4.62 oz..Comes with lifetime warranty.Ethernet to serial device server features user friendly interface, simple to use, powerful in operation and data rate from 110 - 1000000 baud.

Brainboxes Ethernet to serial adapter transfers data at a rate of 1,000,000 baud rates and provides simple instant networked serial ports. Ethernet device can be accessed via TCP/IP sockets from any networked device..8 x RJ-45.2.2"(H) x 8 1/2"(W) x 4.8"(D).Wired.Connectivity media: Twisted pair 10/100base-TX fast Ethernet, Max baud rate: 1 Megabaud.Maximum power consumption: 1.93 W, Data bits: 5, 6, 7 or 8, Parity: Odd, even, none, mark or space, Stop bits: 1, 1.Form factor: Rail-mountable, wall mountable.Operating distance: EIA - RS232 standard.Connector: DB9 connector - 9 pin male, Management and protocols: RS232.Package includes: ES-279 Ethernet to serial device server, global power supply - PW-800, quick start guide, installation CD (manual, Microsoft signed drivers and utilities).Certifications & Standards: IEEE 802.3, IEEE 802.3u, CE, RoHS, WEEE.Weight: 0.87 kg.Black.Brainboxes Ethernet to serial adapter provides access to 8 RS232 serial ports and is featured with web interface for secure configuration of serial port over internet.

The Brainboxes ES-446 1-port RS232 PoE Ethernet to serial device server with fast Ethernet technology is rail-mountable and features user-friendly interface that is simple to use and delivers powerful operation. It comes with serial port tunneling that allows serial cable replacement over any distance and supports data rate from 110 to 1000000 baud. It features point-to-point Tx/Rx modes and has DB9 9 pin male connector. This device server features EIA - RS232 standard operating distance and is compatible with Microsoft Windows 10/8/7/Server 2008/Vista/XP/2000 operating system..Drive server provides access to one RS232 serial port.Dimensions: 1.1"H x 4"W x 3.9"D, 96.3 mm x 101 mm x 25 mm (with ears), 91.6 mm x 77 mm x25 mm (without ears).Connectivity: 10/100Base-TX Fast Ethernet.Requires Microsoft Windows 10, 8 - 32 bit & 64 bit Editions, Windows Server 2012, 7 - 32 bit & 64 bit Editions and Windows Server 2008 32/64 bit.Power supply: PW-800 optional global power supply, power consumption: 1.5 W typical, Power input: Power over Ethernet OR 5 - 30V DC input.Meets CE, IP-30, TAA, Green compliance, RoHS and WEEE certifications & standards.Interface: One RS232 serial port, one Network (RJ-45) and PoE (RJ-45) port.Connector: DB9 connector - 9 pin male, Tx FIFO size: 256, Rx FIFO size: 32, Integrated connector.Operating distance: EIA - RS232 standard, Max baud rate: 1 MegaBaud, Data bits: 5 ,6 ,7 , 8, Parity: Odd, even, none, mark or space, Stop bits: 1 or 2.Power over Ethernet: IEEE 802.3af, PCB layers: 4, Mounting accessory: DIN-rail mounting kit - MK-048, Network protocols: ICMP, IP, TCP and UDP.Media type supported: Twisted pair, User friendly interface, simple to use, powerful in operation.Temperature: 0 - 60 deg C (operating), Humidity: 5 to 95 percent (non-condensing).Contains server, quick start guide, installation CD including manual, Microsoft signed drivers & utilities.Weight: 4.27 oz..Comes with lifetime warranty.Black

The Brainboxes ES-420 1-port RS422/485 PoE Ethernet to serial device server with fast Ethernet technology is rail-mountable and features user-friendly interface that is simple to use and delivers powerful operation. It comes with serial port tunneling that allows serial cable replacement over any distance and supports data rate from 110 - 1000000 baud. It features full duplex, half-duplex autogating Tx/Rx modes and has DB9 9 pin male connector. This device server offers maximum operating distance of 4000' and is compatible with Communicate with Microsoft Windows 10/8/7/Vista/XP 2000 operating systems..Drive server provides access to one RS422/485 serial port.Dimensions: 1.1"H x 4"W x 3.9"D, 96.3 mm x 101 mm x 25 mm (with ears), 91.6 mm x 77 mm x25 mm (without ears).Connectivity: 10/100Base-TX Fast Ethernet.Requires Microsoft Windows 10, 8 - 32 bit & 64 bit Editions, Windows Server 2012, 7 - 32 bit & 64 bit Editions and Windows Server 2008 32/64 bit.Power supply: PW-800 optional global power supply, Power consumption: 1.74 W, Power input: Power over Ethernet OR 5 - 30V DC input.Meets CE TAA, IP-30, Green, RoHS and WEEE certifications & standards.Interface: One RS422/485, Network (RJ-45) and PoE (RJ-45) port.Connector: DB9 connector - 9 pin male, Tx FIFO size: 256, Rx FIFO size: 32, Integrated connector.Operating distance: 4000', Max baud rate: 1 MegaBaud, Data bits: 5 ,6 ,7 , 8, Parity: Odd, even, none, mark or space, Stop bits: 1 or 2.Power over Ethernet: IEEE 802.3af, PCB layers: 4, Mounting accessory: DIN-rail mounting kit - MK-048, Network protocols: ICMP, IP, TCP and UDP.Media type supported: Twisted pair, User friendly interface, simple to use, powerful in operation.Temperature: 0 - 60 deg C (operating), Humidity: 5 to 95 percent (non-condensing).Contains server, quick start guide, installation CD including manual, Microsoft signed drivers & utilities.Weight: 4.27 oz..Comes with lifetime warranty

The Ethernet to Serial Adapter supports data transfer rates of up to 10/100 Mbps..Interface Ethernet.Ports 1 x RJ-45 network port, 2 x serial port.Number of ports 2.Operating systems Windows® 7 (32- 64-bit), Vista (32- 64-bit), XP (32- 64-bit), Server 2003 & 2008 (32- 64-bit), Server 2008.Ethernet technology Fast Ethernet.Network standard 10 100Base-TX.Connector type 9 pin male (DB-9).Operating Temperature 0 to 55 deg C.Dimensions 1.10"(H) x 49"(W) x 42"(L).4 PCB layers.Power consumption 0.92W typical.Flow control RTS CTS, DSR DTR, Xon Xoff.Data bits 5,6,7 or 8, Stop bits 1, 2.Package contents ES-257 ethernet to serial device server, installation CD including manual, microsoft signed drivers & utilities, power supply.Weight 0.515 kg.Certification and standards Green compliant, FCC, WEEE, RoHs.Warranty Lifetime limited.Warranty Lifetime limited.Brainboxes ES-257 2 Port Ethernet to Serial Adapter card provides a simple, instant cable replacement providing network integration.

Lantronix® ED1100002-01 1-Port Secure serial to IP ethernet device server meets the most demanding dynamic computing workloads. It delivers increased performance with the exceptional memory..Measures 0.9"H x 2.5"W x 3.5"D.Runs on high performance 32-bit processor for reliable performance.Has 8MB SDRAM with 8MB flash memory for optimum storage.Supports twisted pair media.Has 1 port for easy connectivity.Supports 7 or 8 data bit characters, 1 or 2 stop bits and odd, even, none parity.Supports software selectable RS232, RS422 or RS485, software selectable RS485/422 termination and biasing modes.Has 1 x Network (RJ-45) port for easy connectivity, has XON/XOFF types flow controls, supports CTS, RTS, DTR/DCD modem control signals.Operates in 10BaseT and 100Base-TX Link network using HTTP, HTTPS, FTP, TFTP, Telnet, TCP/IP, UDP/IP, LPD,DHCP protocols.Supports security protocols like SSL v3, SSH v2 client & server.Power supply is rated at 9 - 30 VDC, 1.8 W maximum.Supports desktop form factor.Supports Windows 98/NT/2000/XP/Vista-Based DeviceInstaller™, ComPort Redirector™, Secure ComPort Redirector softwares.Supports internal web manager, CLI, XML configuration records via CLI or FTP, DeviceInstaller software management.Meets FCC part 15, subpart B, Class A, EN55022, Class A, EN55022 and EN55024, EN61000-4-2, EN6100-4-3 certifications and standards.Weighs 0.20 kg.Comes with 2 years limited warranty.Gray.Lantronix® 1-Port Secure serial to IP ethernet device server has the ability to with stand demanding environmental conditions.

Brainboxes ES-571 RS232 Isolated industrial switch device server meets the most demanding dynamic computing workloads. Ethernet to serial server delivers increased performance with the exceptional memory..Measures 4.7" x 0.9" x 3.9".Has 1 port for easy connectivity.Supports 5, 6, 7 or 8 data bit characters, 1, 1.5 or 2 stop bits and odd, even, none, mark or space parity.Supports 1,000,000, Tx/Rx modes point to point, full duplex, half duplex autogating, hardware autogating data rates.Has XON/XOFF Software handshake or RTS/CTS hardware handshake types of flow control.The Ethernet Interface takes benefit of a company's pre-existing infrastructure.Supports protocols like software selectable as RS232, RS422/485 full duplex or RS485 half duplex, 4 PCB layers.Power supply is rated at typical 1.6 W, 60 mA, 24 V and maximum of 2.9 W.Includes an integrated DIN rail clip for mounting.Supports Microsoft Windows 8, Windows 7, Windows Server 2008, Vista, Server 2003, Windows XP, Linux OS.Meets AEO (C-TPAT), WEEE, RoHS, METL, FCC compliant, CE, Microsoft Certified Gold Partner certification and standards.Weighs 0.211 kg.Brainboxes RS232 1-Port Ethernet switch device server is designed to with stand demanding environmental conditions.

Lantronix® UD1100002-01 1-Port Device server enables users to connect, manage and control just about any piece of equipment with a serial port from virtually anywhere over Ethernet or the Internet. On-board Flash memory offers room for future system software upgrades and maintenance-free, non-volatile web page storage. The built-in web server enables users to access and configure this server from a standard web browser..Measures 0.9"H x 2.5"W x 3.5"D.Runs on Lantronix DSTNI-EX 48 MHz processor for reliable performance.Has 256KB SDRAM with 2MB flash memory for optimum storage.Has 1 port for easy connectivity.Supports 7 or 8 data bit characters, 1 or 2 stop bits and odd, even, none parity.Supports RS232, RS422 or RS485 modes, 300 to 921.6 kbps data rates and has 2 DB9 DTE serial ports for connectivity.Has 1 x Network (RJ-45), 1 x parallel ports for easy connectivity.Operates with 10Base-T/100Base-T interface at a speed of 10/100/Auto Mbps with the aid of RJ45 connector.Supports protocols like ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP and Telnet, TFTP, RFC2217.Power supply is rated at 100 - 240 VAC, 1.8 W max.Supports wall-mountable form factor.Supports Windows 98/ME/NT/2000/XP/Vista (32-bit versions) DeviceInstaller configuration software.Box includes UD1100002-01 device server, power adapter, DeviceInstaller Software, Com Port Redirector software.Meets FCC, C/UL, CSA, VCCI, CE, TUV, Ctick certifications and standards.Weighs 0.4 kg.Comes with 2 years limited warranty.Includes UD1100002-01 device server, device installer software, com port redirector software.Weight: 7.05 oz..Black.Lantronix® 1-Port Device server is a quick, simple & inexpensive way to bring the advantages of remote management to equipment. Delivers increased performance with the best memory.

Lantronix® UD1100IA2-01 1-Port Serial to ethernet industrial device server is a rugged and powerful tool that enables users to connect, manage and control just about any piece of industrial equipment from virtually anywhere over Ethernet or the Internet. In minutes, securely connect factory floor devices to enterprise systems. Support RS-232, RS-422 and RS-485 communications..Measures 0.9"H x 2.5"W x 3.5"D.Runs on Lantronix DSTNI-EX 48 MHz processor for reliable performance.Has 256KB SDRAM with 2MB flash memory for optimum storage.Has 1 port for easy connectivity.Supports 7 or 8 data bit characters, 1 or 2 stop bits and odd, even, none parity.Supports a baud rate of 300 bps to 230 Kbps.Has 1 x Network (RJ-45), 1 x parallel ports for easy connectivity, XON/XOFF (software), CTS/RTS (hardware) types flow control.Operates with 10Base-T/100Base-T interface at a speed of 10/100/Auto Mbps with the aid of RJ45 connector.Supports protocols like ARP,UDP,TCP, ICMP,Telnet,TFTP, AutoIP,DHCP,HTTP, SNMP, TCP,UDP and Telnet,TFTP.Power supply is rated at 9 - 30 VDC, 3.3 VDC on serial interface.Supports wall-mountable form factor.Supports Windows 98/ME/NT/2000/XP-based DeviceInstaller configuration software, Com Port Redirector™ softwares.Supports Lantronix DeviceInstaller GUI, Serial login,SNMP, Telnet login,HTTP management.Box includes UDS1100-IAP industrial device server, 500-163 serial cable.Meets UL, CSA, FCC, CE,TUV, CTick,VCCI certifications and standards.Weighs 0.20 kg.Comes with 2 years limited warranty.Weight: 7.05 oz..Black.Lantronix® 1-Port Device server is a quick, inexpensive & simple way to bring the advantages of remote management to equipment. Delivers increased performance with the best memory.

Brainboxes Ethernet to 4 Digital IO and RS323 serial port device server supports fast ethernet technology with 10/100Base-TX network standard. Server delivers uncompromising performance of up to 1 megabaud and is rail-mountable..Serial port, network (RJ-45).Ethernet technology: Fast Ethernet, network standard: 10/100Base-TX, media type supported: Twisted-pair.Interface: 2 x RJ-45, 1 x serial port.Form factor: Rail-mountable.Power consumption: Input: 5 - 30 VDC, 100mA at 24 V 2.5 W (max).Digital inputs: 4, digital output type: Open drain transistor, protected MosFET, short circuit protection up to 36V, over temperature shutdown -175 deg C typical 150 deg C (min).Latched inputs: Triggered by user programmable positive or negative edges, stays true until acknowledged.Counter inputs: User programmable- counts positive or negative transitions up to 100Hz.Watchdog: Active high/low, pulsed high/low.Logic level 0: 0 - 1 V, logic level 1: 2 - 30 V.Maximum output load voltage: 30 - 250 VAC, maximum output current sink: 5.0 A per channel.Operating systems: Windows server 2008 32 bit & 64 bit editions, windows vista 32 bit & 64 bit editions, mac OS X, windows server 2003 32 bit & 64 bit editions, windows XP 32 bit & 64 bit editions, microsoft windows 2000, Linux.Operating temperature: 0 - 60 deg C.Includes ED-004 4 Port Selectable DIO + RS232, installation CD (manual, Microsoft signed drivers & utilities, quick-start guide).Certifications and standards: CE, CCC-mark, C-TICK, RoHS, WEEE.Warranty: Lifetime limited.Brainboxes Ethernet to 4 Digital IO and RS323 serial port device server is supported with twisted pair media and has a RJ-45 network port.

Brainboxes Ethernet to digital IO/RS232/switch device server supports fast ethernet technology with 10/100Base-TX network standard. Server delivers uncompromising performance of up to 1 megabaud and is rail-mountable..Serial port, network (RJ-45).Ethernet technology: Fast Ethernet, network standard: 10/100Base-TX, media type supported: Twisted-pair.Interface: 2 x RJ-45, 1 x serial port.Form factor: Rail-mountable.Power consumption: Input: 5 - 30 VDC, 100mA at 24 V 2.5 W (max).Digital inputs: 4, digital output type: Open drain transistor, protected MosFET, short circuit protection up to 36V, over temperature shutdown -175 deg C typical 150 deg C (min).Latched inputs: Triggered by user programmable positive or negative edges, stays true until acknowledged.Counter inputs: User programmable- counts positive or negative transitions up to 100Hz.Watchdog: Active high/low, pulsed high/low.Logic level 0: 0 - 1 V, logic level 1: 2 - 30 V.Maximum output load voltage: 30 - 250 VAC, maximum output current sink: 5.0 A per channel.Operating systems: Windows server 2008 32 bit & 64 bit editions, windows vista 32 bit & 64 bit editions, mac OS X, windows server 2003 32 bit & 64 bit editions, windows XP 32 bit & 64 bit editions, microsoft windows 2000, Linux.Operating temperature: 0 - 60 deg C.Includes Ethernet to digital/RS232/switch, installation CD (manual, Microsoft signed drivers & utilities, quick-start guide).Certifications and standards: CE, CCC-mark, C-TICK, RoHS, WEEE.Warranty: Lifetime limited.Brainboxes Ethernet to digital IO/RS232/switch device server is supported with twisted pair media and has two RJ-45 network ports.

Lantronix® UD1100001-01 1-Port Serial to IP ethernet device server enables users to connect, manage and control just about any piece of equipment with a serial port from virtually anywhere over Ethernet or the Internet. Replace dedicated PCs and modem lines with fast and reliable Ethernet networking. It features TruPort Com port control technology for better performance..Measures 0.9"H x 2.5"W x 3.5"D.Runs on Lantronix DSTNI-EX 48 MHz processor for reliable performance.Has 256KB SDRAM with 2MB flash memory for optimum storage.Has 1 port for easy connectivity.Supports 7 or 8 data bit characters, 1 or 2 stop bits and odd, even, none parity.Supports RS232, RS422 or RS485 modes, 300 to 921.6 kbps data rates and has 2 DB9 DTE serial ports for connectivity.Has 1 x Network (RJ-45), 1 x parallel ports for easy connectivity.Operates with 10Base-T/100Base-T interface at a speed of 10/100/Auto Mbps with the aid of RJ45 connector.Supports protocols like ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP and Telnet, TFTP, RFC2217.Power supply is rated at 110 VAC, 1.8 W max.Supports wall-mountable form factor.Supports Windows 98/ME/NT/2000/XP/Vista (32-bit versions) DeviceInstaller configuration software.Box includes UD1100001-01 device server, DeviceInstaller software, Com Port Redirector software.Meets FCC, C/UL, CSA, VCCI, CE, TUV, Ctick certifications and standards.Weighs 0.4 kg.Comes with 2 years limited warranty.Black.Lantronix® Device server features Fast Ethernet technology that offers better performance. It supports RS232, RS422 and RS485 communications.

Brainboxes Ethernet to DIO 8 digital inputs and 8 digital outputs + serial port supports factory floor process control and has integrated DIN rail mount. Port controls any input or output from TTL to high voltage high current industrial devices..Dimensions: 128 mm(H) x 22.6 mm(W) x 102 mm(D).For device with a web browser, Microsoft Windows 8 editions/server 2012/server 2008 R2/server 2008/Vista/server 2003/XP/2000, Android, iOS, Mac OS X, Linux operating systems.Control any input or output from TTL to high voltage high current industrial devices.Interfaces/ports: 1 x network (RJ-45)-port, 1 x serial-port.Power: Unregulated 5 - 30 VDC, reverse polarity protection, 2.5 W max power consumption.Media type supported: Twisted pair.Ethernet technology: Fast ethernet, Network standard: 10/100BASE-TX.Form factor: Rail-mountable.Isolation: 1500VRMS magnetic isolation from ethernet.Tx/Rx FIFO size: 2048/2048, Watchdog: Active high/low, pulsed high/low.Operating distance: 4000'.Operating temperature: -30 - 80 deg C, Ambient relative humidity: 5 - 95% (non-condensing).Network enable your NuDAM/ADAM modules.Factory floor process control and automation.Removable screw terminal blocks make installation easier and quicker.Colour coded blocks and-ports prevents incorrect connection, numbered-pins simplifies wiring and removes confusion.Includes ED-588 ethernet to digital IO 8 inputs plus 8 outputs, installation CD (manual, Microsoft signed drivers and utilities, quick start guide).Compliant and standards: RoHS, WEEE, CE, CCC-Mark, C-Tick.Weight: 18.17 oz..Warranty: Lifetime limited.Brainboxes Ethernet to DIO 8 digital inputs and 8 digital outputs + serial port supports fast Ethernet technology and has rail-mountable form factor.

Brainboxes ED-516 16 Digital input device server is well suited as RS485 Gateway for connecting with industry standard NuDAM, eDAM and ADAM modules. Server has 16 non-isolated digital input channels for better performance. Server is implemented using Windows COM port driver that is compatible with all PC packages. Server has latched inputs that stay true until acknowledged. Provides user programmable count that is positive or negative transitions of up to 100Hz. Has RJ45 Jack 10/100 MHz autosensing, cross over autosensing type network ports. Server has ICMP, IP, TCP, DHCP, HTTP network protocols. Provides 1500 V magnetic isolation between ports and network for better protection. Server is compatible with Microsoft Windows 8, Microsoft Windows 7, Windows Server 2008 and more..Measures 5" x 0.9" x 4".Features network RJ-45, serial ports for reliable connectivity.Rail-mountable form factor.Offers fast ethernet and 10/100Base-TX network for quicker operation.Offers twisted pair connectivity.Supports ICMP, IP, TCP, DHCP, HTTP network protocols for reliable connection.Has 5 - 30VDC input power and is reverse polarity protected as well as operates at an input voltage of 35 V.Works smoothly on Microsoft Windows 8 32 bit & 64 bit and 7 32 bit & 64 bit operating system.Has an operating temperature of -30 to +80 deg C and storage temperature of -40 to 85 deg C.Meets RoHS, CE, TAA, CCC-Mark and C-Tick certification/standards.Weighs 4.8 oz.Operating systems: Microsoft Windows 8/7/ (32-bit/64 bit), Windows Server 2003/2008/Vista/XP (32-bit/64 bit).Monitor any input from TTL to high voltage high current industrial devices, RS485 gateway for connecting to Industry standard NuDAM, eDAM and ADAM modules.Removable, numbered, colour coded screw terminals.Includes: Installation CD including manual, Microsoft signed drivers & utilities, quick start guide.Certifications and standards: CE, CCC-Mark, C-Tick, RoHS, WEEE, Green compliant.Weight: 4.8 oz..Warranty: Lifetime.Brainboxes Ethernet to 16 digital input device server helps to monitor any input from TTL to high voltage high current industrial devices. Comes with rail-mount form factor.

Digi One IA provides reliable, cost-effective network connectivity for virtually any serial device. This unobtrusive and easy-to-use serial server delivers serial-to-Ethernet connectivity to Programmable Logic Controllers (PLCs), Remote Terminal Units (RTUs), process and quality equipment, bar-code readers and other industrial devices..Network (RJ-45): Yes.Serial Port: Yes.Number of Network (RJ-45) Ports: 1

The EDS4100 is the first external device server to deliver an enterprise-grade, programmable device computing and networking platform for integrating edge equipment into the enterprise network..Ports: 4 x DB 9, 1 x RJ 45.Dimensions: 3.8"(H) x 17.7"(W) x 12.7"(D).Compatibility: PC.Form factor: Wall mountable, Processors installed: 1 x 266 MHz.Ethernet technology: Fast ethernet, Data link protocol: Ethernet, fast ethernet, RS 232, RS 422, RS 485.Interface/ports: 2 x serial - RS 232 - 9 pin D Sub (DB 9), 2 x serial - RS 232/422/485 - 9 pin D Sub (DB 9), 1 x network - Ethernet 10base T/100Base TX - RJ 45.Connectivity technology: Wired.Status indicators: Link activity, power, test mode.OS compatibility: Microsoft windows 98/ME/NT/2000/XP.RAM Installed ( Max ): 32 MB, Flash Memory Installed (Max): 8 MB.Operating temperature: 32 - 131 deg F, Humidity: 10 - 90%.Encryption algorithm: Triple DES, ARCFOUR, AES, SSL 3.0, Authentication method: Secure shell v.2 (SSH2).Co mmunication mode: Half duplex, full duplex, IEEE 802.3af (when PoE is populated), 128 bit encryption, DHCP support, BOOTP support, ARP support.Network protocols: TCP/IP, UDP/IP, ICMP/IP, Remote management protocol: SNMP 2, Telnet, HTTP.Includes: EDS4100 4 port device server with PoE, universal power supply and regional adapters, deviceInstaller configuration software, com port redirector software and related utilities.Certificate and standards: UL, TUV GS, VCCI, C Tick, cUL, EN 61000 3 2, IEC 61000 4 11, IEC 61000 4 2, IEC 61000 4 3, IEC 61000 4 4, IEC 61000 4 5, IEC 61000 4 6, IEC 61000 4 8, EN 61000 3 3, EN55024, EN55022 Class A, CISPR 22, FCC Part 15, RoHS.Weight: 1.90 lbs..Warranty: 2 years limited.Lantronix EDS Series PoE Device Server - Faster Ethernet Connection

Brainboxes Device server has wide operating voltages of 5 - 30 VDC input. Server features data transfer rates of up to 1000000 baud and coupled with 1 Mbps line drivers which deliver uncompromising performance..Network Certificates and standards: 10Base-T/100Base-Tx.LAN Ports: Ethernet 10Base-T/100Base-Tx.Connectivity technology: Wired.Protocol: Ethernet, fast ethernet, RS-232, RS-422, RS-485 data link, TCP/IP, UDP/IP, ICMP/IP, BOOTP, DHCP network/transport.Form factor: DIN rail mountable.Status indicators: Port status, link activity, link OK.Voltage required: 5 - 30 VDC.Power consumption: 2.9 W.OS required: Microsoft Windows 2000/2008/2003 Server, Windows Vista/7/xP/ (32/64 bits).Operating distance: RS422/485 standard (4000 ft : 1200 metres) / EIA - RS232.Max baud rate: 1000000 baud.Features: Flow control, full duplex capability, auto-uplink (auto MDI/MDI-x).Operating tempreature: 176 - -22 deg F.Operating humidity range: 5 - 95 (non-condensing).Certifications and Standards: ISO 9001, ISO 14001, EMC, RoHS, WEEE, IEC 60529 IP30.Warranty: lifetime.Brainboxes Device server has removable screw terminals blocks for easy wiring and supports legacy software using COM port interfacing.

Lantronix® XSDR22000-01 XPress-DR+ 4-Port Industrial device server enables users to remotely configure, monitor and control PLCs, drives, motion controllers, power equipment, barcode scanners and other serial devices from anywhere over the Net. It provides complete access and control of virtually any type of equipment with a serial port..XPress-DR+ industrial device server allows users to remotely configure, monitor and control PLCs.Measures 2.2"H x 4.8"W x 3.5"D.Runs on Lantronix DSTNI-EX 48 MHz processor for reliable performance.Has 256KB SDRAM with 2MB flash and 2KB EEPROM memory for optimum storage.Has 4 ports for easy connectivity.Supports 7 or 8 data bit characters, 1 or 2 stop bits and odd, even, none parity.Supports a baud rate of 300 to 230 Kbps and 1 screw terminal RS-422/485 interface on serial port 2.Has 4 x Network (RJ-45) ports for easy connectivity, supports DTR, DSR modem control signals, XON/XOFF (software), CTS/RTS (hardware) flow control.Operates in embedded, unmanaged, fully compliant 802.3u non-blocking network with 2 RJ45 10Base-T/100Base-TX Ethernet ports.Supports protocols like ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP and HTTP.Power supply is rated at 9 - 30 VDC or 9 - 24 VAC with chassis ground and 2.6 W, has removable screw terminal block connector.Has front panel recessed push button for resetting.Supports internal web server, SNMP v2, Serial login, Telnet login, DeviceInstaller software management.Meets UL, CSA, FCC, CE, TUV, CTick, VCCIs certifications and standards.Weighs 0.21 kg.Black.Lantronix® Industrial device server enables remote firmware upgrades, saving time and money.

Network (RJ-45): Yes.USB: Yes.Serial Port: Yes

The UDS1100 Device Server with PoE enables users to connect, manage and control just about any piece of equipment with a serial port from virtually anywhere over Ethernet or the Internet..Ports: 1 x RJ 45, 1 x DB 25.Dimensions: 3 1/2"(H) x 2 1/2"(W) x 0.9"(D).Compatibility: PC.Form factor: Wall mountable, Processor speed: 48 MHz.Ethernet technology: Fast ethernet, Data link protocol: Ethernet, fast ethernet, RS 232, RS 422, RS 485.Interface/ports: 1 x serial - RS 232/422/485 - 25 pin D Sub (DB 25), 1 x network / power - Ethernet 10base T/100Base TX - RJ 45.Connectivity technology: Wired.Status indicators: Link activity, power, status.Standard memory: 256 KB, Memory technology: SRAM, Flash Memory installed (Max): 2 MB.Operating temperature: 41 - 122 deg F.Input voltage: 30 VDC.Software selectable RS232, RS422 or RS485, flow control, DHCP support, ARP support, half duplex mode, full duplex mode.Network protocols: TCP/IP, UDP/IP, ICMP/IP, Remote management protocol: SNMP, Telnet, HTTP.Certificate and standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3af, UL, CSA, FCC, CE, TUV, C Tick, C Tick.Weight: 7.05 oz..Warranty: 2 years limited.Latronix Device Server with PoE - Simplicity and Speed

Lantronix Single port device server provides a portable, extremely flexible and highly affordable network connectivity solution. Server features serial data rate of up to 921.6 Kbps..Network Certificates and standards: 10Base-T/100Base-Tx.LAN Ports: Ethernet 10Base-T/100Base-Tx.Wired router security: 128-bit AES, 192-bit AES, 256-bit AES encryption.Connectivity technology: Wired.Protocol: Ethernet, fast ethernet, RS-232, RS-422, RS-485 data link, TCP/IP, UDP/IP, ICMP/IP, BOOTP, DHCP network/transport, SNMP, Telnet, HTTP, TFTP remote management.Form factor: External.Status indicators: Power, status, link/activity, serial.Power consumption: 2 W.OS required: Microsoft Windows 2008/2003 server, Windows Vista/7/xP/ (32/64 bits).Data rate: 300 bps - 921.6 kbps, 10 Mbps, 100 Mbps.Features: Flow control, auto-sensing per device, DHCP support, 15 KV electrostatic discharge protection.Operating tempreature: 70 - -40 deg C.Processors: 1 x installed, 256 KB SRAM, 1MB flash memory installed.Certifications and Standards: VCCI, C-Tick, EN 61000-3-2, EN 61000-3-3, EN55024, CISPR 22, EN55022 Class B, FCC Part 15 B, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EN 61000-4-5, IEEE 802.3af.Lantronix Single port device server is a sleek and compact serial-to- Ethernet device server providing quick and easy Ethernet connectivity to virtually any device or machine with a serial interface.

Lantronix® Device server enables users to connect, manage and control any piece of equipment from virtually anywhere over Ethernet. Server is a single port wall mountable dual-port device offers control to equipment..Compatibility: PC.Network standard: 10/100Base-TX.Dimensions: 0.9"H x 2.8"W x 3.7"D.CPU: Lantronix DSTNI-EX 48 MHz clock.Protocols: Arp, Icmp/ip, Tcp/ip, Udp/ip, Dhcp, Http, Snmp, Telnet.Number of ports: Ethernet, Fast Ethernet, RS-232, RS-422, RS-485.Operating supply voltage: 9 - 30 V.Power consumption: 1.8 W.Memory: 256KB SRAM, 2MB flash.Minimum operating system required: Microsoft Windows 98/ME/NT/2000/XP.Status indicators: Link activity, Port duplex mode, Power, Status.Black.Lantronix® UD2100002-01 Device Server is a single port wall mountable device server that comes with Lantronix DSTNI-EX 48 MHz clock processor, designed for PC.

The Lantronix® EDS2100 hybrid Ethernet terminal and multiport device server which allows remote access to and management of virtually any IT/networking equipment or edge device such as medical equipment, POS terminals or security equipment. The EDS1100 device server converts your RS232/422/485 serial port to a high speed networked 10/100 Ethernet port. The server features Lantronix powerful evolution OS®, with AES, SSH and SSL built in, which allows EDS device server to provide enterprise-level security for safe remote access and management from practically anywhere. It has dual-port 2 x DB9M serial connectors..Desktop server offers reliable and efficient performance.Features 32-bit processor and 8MB SDRAM for high-performance.Flash memory: 8MB.Dimensions: 0.9" x 2.8" x 3.7".Connectivity interface: two DB9M, 10BaseT and 100Base-TX Link network interface.Power: 120/230 VAC input voltage, 1.8 W power consumption external power adapter.Certifications: FCC Part 15, Subpart B, Class A, EN55022, Class A, EN55022 and EN55024, ICES-003 Issue 4, AS/NZS CISPR22, VCCI, CE, C-Tick.ARP support, BOOTP support, syslog support.Nominal voltage: 120/230 VAC, Power consumption: 1.8 W.Media type supported: Twisted pair.Authentication method: Secure Shell v.2 (SSH2), Encryption algorithm: AES, SSL 3.0.Meets AES, C-Tick, CISPR 22, CSA C22.2 No. 60950-1-03, EN 61000-4-11, EN55022 Class A, EN55024, FCC Class A, FCC Part 15, ICES-003, RoHS, U standards.Supports Windows 98/NT/2000/XP/Vista-Based DeviceInstaller™, ComPort Redirector™, Secure ComPort Redirector softwares.Supports internal web manager, CLI, XML configuration records via CLI or FTP, DeviceInstaller software management.Meets FCC part 15, subpart B, Class A, EN55022, Class A, EN55022 and EN55024, EN61000-4-2, EN6100-4-3 certifications and standards.Weighs 0.40 kg.Comes with 2 years limited warranty.Gray.Lantronix® 2-Port Secure serial to IP ethernet device server has the ability to with stand demanding environmental conditions.

The Lantronix® XPress™ DR-IAP industrial device server with 10/100Base-TX Fast Ethernet connectivity, allows you to connect, manage and control any equipment with a serial port from nearly anywhere through a network or the Internet. The installable industrial protocols support various communication drivers. It has one RJ-45 network port and one RS-232/422/485 serial network port for enhanced connectivity. This device server is a quick, simple and inexpensive way of adding Ethernet connectivity to virtually any device with a serial interface..Industrial device server with installable industrial protocols allow virtually any serial device to connect to a new or existing Ethernet network.Dimensions: 3.54"H x 1.4"W x 2.4"D.High-impact plastic for durability.Media type supported: Twisted pair.Connectivity: 10/100Base-TX Fast Ethernet, Data rates: 300 - 115200 bps, Characters: 7 or 8 data bits.Interfaces/ports: Network (RJ-45), RS-232/422/485 serial.Form factor: DIN rail-mountable.Connector type: Terminal block (screw).Power supply: 9 - 24 VAC/9 - 30 VDC, Power consumption: 3 W (operational).Network transport protocol: ARP, BOOTP, DHCP, ICMP/IP, TCP/IP and UDP/IP.Remote management protocol: HTTP, SNMP, Telnet and TFTP.Status indicators: Active, fail, link ok, ready, receive and transmit.Operating system: Microsoft Windows.Meets UL, CSA, CE, RCM, VCCI and RoHS certifications and standards.Comes with 1 year limited warranty

The Digi™ 70001919 portserver® TS H MEI 4-port device server is suitable for serial-to-Ethernet connectivity in utility plants, pipelines, traffic management facilities and other remote locations requiring extended operating temperatures. This device is perfect for network-enabling and remotely managing variable message signs, loop detectors and RS-232/422/485 serial device..Dimensions: 1"H x 3.3"W x 5.3"D.Compatible with PC, Unix.Ethernet technology: Fast Ethernet.Form factor: External.Wired connectivity.Number of serial ports: 4.Interface: 1 x RJ-45 (serial), 3 x RJ-45 (RS-232).Data link protocol: Ethernet, fast Ethernet, PPP, RS-232, RS-485, network transport protocol: TCP/IP, UDP/IP, remote management protocol: HTTP, SNMP.Data transfer rate: 230 Kbps, Status indicators: Link activity, power.ARP support, DHCP support, Flow control, RARP support.Authentication method: Secure Shell v.2 (SSH2), Encryption algorithm: SSL, TLS.CSA, cUL, EN55022, EN55022 Class A, FCC Class A certified, UL 60950 standards.Digi® Portserver TS 4-Port device server delivers high-performance serial-to-Ethernet connectivity and is designed to with stand demanding environmental conditions.

Digi® PortServer® 70002043 TS 2-Port RS232 Device server has patented RealPort COM port redirector technology that makes it possible to establish a connection between the host and networked serial device by creating a local COM or TTY port on the host computer. Great for applications requiring COM ports or where TCP/UDP Sockets or UDP multicast functionality is required. It provides standard serial-to-Ethernet connectivity simply and reliably. Server is wall mountable for convenient usage..Measures 3.33" H x 5.25"W x 0.95"D.Has 2 ports for easy connectivity.Has link, power, activity, status LEDs.Has 3 x Network (RJ-45) port for easy connectivity, offers up to 230 Kbps throughput, supports signal for TXD, RXD, RTS, CTS, DTR, DSR, DC.Operates in fast ethernet technology, 1 RJ-45 10/100 Mbps 10/100Base-T network and full or half duplex communication for superior performance.Supports protocols like UDP/TCP, DHCP/RARP/ARP-Ping for IP address assignment, PPP, extended telnet RFC 2217, telnet.Power supply is rated at 9 - 30 VDC with locking barrel power connector, typical 4 W and maximum of 6 W.Supports wall-mountable form factor.Supports device-initiated patented RealPort® COM port redirector, Operating systems: AIX, HP-UX, Linux®, SCO® OpenServer™ 5 softwares.Supports HTTP/HTTPS, CLI, Digi Port Authority-Remote management diagnostics and auto-discovery tool management.Box includes PortServer TS 2 device server, power supply, RJ-45/DB-9F crossover cable.Meets UL/CUL 60950, IEC 60950 & CB, CE, FCC part 15 (Class A), EN55024, EN55022 Class A certification and standards.Weighs 2.25 oz.Weight: 2.25 oz..Warranty: 5 years limited.Digi® PortServer® TS 2-Port RS232 Device server features fast Ethernet technology that offers better performance. Delivers increased performance with the best memory.

Perle 04030124 Iolan DS1 1-Port Device server is suitable for serial to Ethernet connectivity applications. It features next generation IPv6 technology that makes it perfect for applications that require remote device/console management, data capture or monitoring. Server is designed to meet the most demanding dynamic computing workloads..Measures 0.9"H x 2.5"W x 3.5"D.Runs on MPC852T 66 MHz 87MIPS processor for reliable performance.Has 16MB memory for optimum storage.Has 1 port for easy connectivity.Has 50 bps to 230 Kbps, DB25M, DB25F, DB9M or RJ45 connectors for convenient connectivity.Supports EIA-232 full duplex, EIA-422 full duplex, EIA-485 4 wire, full duplex, EIA-485 2 wire, half duplex interface modes.Has 1 x serial port for easy connectivity.Operates in 1 x 10/100 RJ45 network for providing superior performance.Supports protocols like IPV6, IPV4, TCP/IP, CIDR, ARP, RARP, UDP, UDP Multicast, ICMP, BOOTP, DHCP, TFTP.Power supply is rated at 9 - 30 VDC, 4.8 W.Comes in black color for sophisticated look.Has power/ready, link status/lan speed, network link activity indicators for convenience, Supports Tx and Rx serial data.Supports Web browser, Perle DeviceManager software to manage multiple device servers.Box includes CD, quick start guide.Meets FCC Part 15A, CE, CSA, UL 1950, EN 55022 Class A, EN 60950 certifications and standards.Weighs 0.35 kg.Comes with lifetime limited warranty.Warranty: Lifetime limited.Perle Iolan DS1 1-Port Device server with a 66 MHz processor speed offers better performance. It delivers increased performance with the best memory.