Fanless Gigabit Switches
51 resultsNetgear 16 PoE+ ports with 190W power budget. Unmanaged 300-Series PoE switches are easy, reliable, and affordable network connectivity for home and small offices. Providing power and data from a single Ethernet cable..Unmanaged PoE switch is easy, reliable, and affordable network connectivity for home and small offices.Dimensions: 1.7"H x 13"W x 8.1"D.Comes in black durable and rugged metal case.24 Gigabit ports.Simple set up with no software to install or configuration needed.Non-blocking switching architecture for maximum throughput at wire speed.Fanless design minimizes noise pollution, making the switch ideal for noise-sensitive environments.Designed to optimize power usage, lowering its cost to operate
The Tenda TEG1024D is a high-performance, 24-port Gigabit Ethernet unmanaged switch designed for reliable and efficient network expansion in small to medium-sized businesses, schools, and community networks. With its plug-and-play functionality, the switch requires no complex configuration, making it an ideal choice for users seeking simplicity and performance. Each of its 24 auto-negotiation RJ45 ports supports speeds of 10/100/1000 Mbps, with full-duplex mode enabling data transfer rates of up to 2000 Mbps per port. The TEG1024D features a robust switching capacity of 48 Gbps and a packet forwarding rate of 35.7 Mpps, ensuring seamless data transmission even in high-traffic environments. Housed in a durable metal casing, this fanless switch operates silently and offers flexible installation options, including desktop, wall, and rack mounting. Energy-saving technology reduces power consumption during low traffic periods, contributing to cost efficiency. With compliance to IEEE 802.3 standards and certifications like CE, FCC, and RoHS, the TEG1024D guarantees compatibility and safety. Whether for office networking, educational facilities, or community setups, the Tenda TEG1024D provides a cost-effective and reliable solution for high-speed wired connectivity..The Tenda TEG1024D features 24 auto-negotiation 10/100/1000 Mbps Ethernet ports, offering Gigabit Ethernet performance, and is classified as an unmanaged switch, providing plug-and-play functionality without the need for configuration..Supports a data transfer rate of up to 1 Gbps per port in full-duplex mode, allowing up to 2000 Mbps data transmission per port..Comes in a compact metal housing and supports desktop, wall, and rack-mountable installation options, providing flexibility for various deployment scenarios..The TEG1024D is a wired-only switch..The switch operates in store-and-forward mode, ensuring reliable data transfer. It has a switching capacity of 48 Gbps and a forwarding rate of 35.7 Mpps, enabling efficient throughput for high-traffic environments..Has a maximum power consumption of less than 12W and includes energy-saving features that reduce power consumption during periods of low network activity..Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3x standards. It also meets CE, FCC, and RoHS certifications, ensuring compatibility and safety in various operating environments.
TEG1024G is a 24-port gigabit Ethernet switch independently designed by Tenda. The switch supports wire-speed forwarding of all ports to ensure smooth transmission of large files and video streaming. It features a compact metal body, and supports desktop, wall and rack mounting. As a flexible and simple-to-use device, it can be connected to such network devices as computers and network cameras. It is your ideal choice for video surveillance and wired networking in such scenarios as SMBs, communities, factories, and schools..24 port switch, with 24 10/ 100/ 1000 Mbps RJ45 Ethernet ports supporting Auto-negotiation and Auto MDI/MDIX, delivers high-speed.The TEG1024G does not support Power over Ethernet (PoE), making it ideal for applications that do not require powered devices..24 port gigabit switch provides 48Gbps of backplane bandwidth and ensures wire-speed forwarding.Quick and easy setup, no additional configuration or software needed for this network switch.Fanless design ensures quiet operation, and metal casing, extraordinary heat dissipation..The built-in power supply and all 24 ports support up to 6000V lightning protection to ensure the stability and reliability of the ethernet switch..Gigabit ethernet switch supports desktop/wall/rack mounting, meeting your installation preferences.
SS2GR4000 Series is a L2 Gigabits intelligent switch designed for carrier and MAN networks. It supports comprehensive QoS, enhanced VLAN functions (VLAN VPN, Voice VLAN, QinQ, N:1 VLAN Translation), Ethernet Ring Protection Protocol (G.8032), classified bandwidth control, intelligent security control, OAM(Operations, Administration and Maintenance), manageability functions and Triple-Play services which fulfill the network requirements demanded by carrier network, MAN access. SS2GR4000 Series switch offers green features like IEEE 802.3az (Energy Efficient Ethernet), Fan-less design, which can dramatically lower power consumption, achieve green energy and save the cost for the carrier and MAN users..Features 48 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network
Netgear 300 Series Gigabit Ethernet unmanaged switches provide easy, reliable, and affordable network connectivity for home and small offices. With these unmanaged plug-and-play switches, you can expand your network connections to multiple devices instantly. Just step up to switch directly to avoid congestion due to stacking up lower port count switches and be ready for future expansion..Unmanaged switch provides easy, reliable, and affordable network connectivity for home and small offices.Contains 24 x 10/100/1000Mbps ports (auto uplink).Non-blocking switching architecture for maximum throughput at wire speed.Dimensions: 1.7"H x 9.9"W x 7.1"D.Power consumption: 12.1W max and 4.33W standby; features energy-efficient technology for power savings.Certifications and standards: Meets or exceeds CE Mark, FCC Part 15 Class A, IC Class A, RCM, VCCI, CB, CE LVD standards.Fanless design for silent operation.Desktop-, wall-, and rack-mountable (rack-mount kit included).Auto MDI/MDIX eliminates the need for crossover cables.LED indicators for ease of use.Auto negotiation for automatic connection at the highest common speed between the switch and end device.802.1p QoS for traffic/frame prioritization.Plug-and-play; no setup required.Durable and rugged metal case for added protection.Standards-based technology ensures interoperability with any standards based devices in the existing network.3-year manufacturer limited warranty
The NETGEAR GS108LP is the industry’s first flexible PoE+ 8-Port Gigabit Ethernet plug-and-play switch with 60W PoE budget. The Industry’s first flexible PoE+ integrated technology allows you to increase or decrease the PoE budget at any time to provide to your devices the power they need with interchangeable external power supply and an intuitive power selector. The flexible mounting options (rack-mount, wall-mount or desktop) and the compact and fanless design make the GS108LP an ideal option for any business or home..PLUG AND PLAY-Simple set up with no software or configuration needed.POWER-OVER-ETHERNET-8 Gigabit PoE+ ports with 60w PoE power budget.FLEXIBLE MOUNTING-Rack/Desktop or Wall-Mount to be used in any environment.FUTURE-PROOF POWER- Upgradable PoE budget with Interchangeable power supplies.SMALL AND SILENT-Small and sturdy metal case and fanless quiet operation.ProSAFE Lifetime Protection-Lifetime Limited Hardware warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert
SS2GR4000 Series is a L2 Gigabits intelligent switch designed for carrier and MAN networks. It supports comprehensive QoS, enhanced VLAN functions (VLAN VPN, Voice VLAN, QinQ, N:1 VLAN Translation), Ethernet Ring Protection Protocol (G.8032), classified bandwidth control, intelligent security control, OAM(Operations, Administration and Maintenance), manageability functions and Triple-Play services which fulfill the network requirements demanded by carrier network, MAN access. SS2GR4000 Series switch offers green features like IEEE 802.3az (Energy Efficient Ethernet), Fan-less design, which can dramatically lower power consumption, achieve green energy and save the cost for the carrier and MAN users..Features 24 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network
The NETGEAR 48-Port Gigabit Ethernet Switch with simple plug-and-play. Auto-sensing ports provides easy, reliable, and affordable connectivity for your small office network. A rugged metal enclosure, silent, fanless design, and rackmount kit allow for convenient deployment to build out your SMB network. The GS348 is covered by a 3 year warranty..48-port auto-sensing Rackmount Gigabit Ethernet Switch.96 Gbps non-blocking switching architecture.Plug-and-Play Unmanaged Switch, no configuration needed.Top Quality Components that allows the switch to work in challenging environments with a 0-50C Max Operating Temperature.Pre-configured QoS 802.1p to automatically priories voice,video over data..Durable and rugged metal case with fanless design for silent operation.NETGEAR GS348 48-Port Gigabit Ethernet Rackmount Network Business Essentials Switch
Introducing the Netgear GS305v3 5-port Gigabit Ethernet unmanaged switch for easy, reliable and affordable plug-and-play connectivity to quickly offer Gigabit speeds to your workstations, printers, and PCs with a fanless and sturdy metal design. The Netgear SOHO GS305v3 is perfect for small offices with no IT manager, for conference rooms, retail stores, small offices, or noise-sensitive environments. With this unmanaged plug-and-play switch, you can expand your network connections to multiple devices instantly..Unmanaged Gigabit Ethernet switch provides LAN access for five users in small office and home networks.Five 10/100/1000Base-T RJ45 ports (auto uplink).Provides up to 10Gbps of non-blocking bandwidth.Dimensions: 1.1"H x 4"W x 3.7"D.2.15W maximum power consumption; 0.31W minimum power consumption; supports IEEE 802.3az and auto power-down option for maximum power savings.Certifications and standards: Meets or exceeds FCC Part 15 standard.Fanless and sturdy metal design allows for silent operation, great for deployment in noise-sensitive environments.Can be installed on the top of a desk or a conference table, or can be easily wall-mounted in your office.Non-blocking switching architecture for maximum throughput at wire speed.Features LED to indicate activity on each port and energy-efficient technology for power savings.Auto MDI/MDIX eliminates the need for crossover cables.Auto negotiation for automatic connection at the highest common speed between the switch and end device.Supports 802.1p QoS for traffic and frame prioritization.Standards-based technology ensures interoperability with any standards-based devices in the existing network.Supports Plug-and-Play with no setup required.3-year manufacturer limited warranty
The Tenda SG108M is an 8-port Gigabit Ethernet switch designed to deliver high-speed, reliable wired connections for small offices, home offices, or any network setup. With its unmanaged switch design, the SG108M offers plug-and-play installation, requiring no advanced configuration to get started. It supports auto-negotiating RJ-45 ports for 10/100/1000 Mbps speeds and features Auto-MDI/MDIX, ensuring seamless compatibility with various devices and cable types. The compact and lightweight design makes the SG108M ideal for both desktop and wall-mounted installations. Its 16 Gbps switching capacity and 11.9 Mpps forwarding rate provide a smooth and efficient data transfer experience, while the 802.1p QoS support ensures prioritized traffic for latency-sensitive applications like video streaming and online gaming. The switch also supports IGMP snooping, optimizing multicast traffic for bandwidth efficiency. Built with energy-saving features, including Energy-Efficient Ethernet (EEE) technology, the SG108M dynamically adjusts power consumption based on link status and cable length, reducing energy usage without compromising performance. Its durable housing and fanless design ensure quiet operation and long-term reliability. Whether expanding an existing network or setting up a new one, the Tenda SG108M delivers fast, stable, and easy-to-use connectivity for a variety of networking needs..The Tenda SG108M features 8 Gigabit Ethernet ports, delivering high-performance connectivity in an unmanaged switch design for effortless plug-and-play operation..Supports a maximum data transfer rate of 10/100/1000 Mbps per port, ensuring fast and stable wired connections for devices..Compact desktop form factor with an option for wall-mounting, providing flexibility in installation and space-saving capabilities..The Tenda SG108M does not include wireless connectivity, offering dedicated wired Ethernet connections only..This switch does not support Simple Network Management Protocol (SNMP), emphasizing simplicity and ease of use..Equipped with 802.1p Quality of Service (QoS) support, the switch prioritizes latency-sensitive traffic for applications such as video streaming and online gaming..Features Auto-MDI/MDIX for automatic detection of cable types and link status monitoring, providing secure and efficient system management..Delivers a throughput capacity of up to 16 Gbps with a forwarding rate of 11.9 Mpps, ensuring high-performance switching in unmanaged mode..Designed with Energy-Efficient Ethernet (EEE) technology, it reduces power consumption by dynamically adjusting based on link status and cable length..Complies with IEEE 802.3, 802.3u, 802.3ab, and 802.3x standards, ensuring compatibility and reliable performance in diverse network environments.
The Tenda TEG1008M is an 8-port unmanaged Gigabit Ethernet switch designed for seamless, high-speed networking in small to medium-sized business environments and surveillance systems. Featuring eight 10/100/1000 Mbps auto-negotiation RJ45 ports, this switch provides reliable and efficient gigabit transmission, ideal for handling large file transfers, HD video streaming, and lag-free connections. Constructed with a durable metal housing, the TEG1008M ensures effective heat dissipation and long-lasting performance in demanding network setups. Its compact and versatile design supports both desktop and wall-mounted installations, catering to various space requirements. The fanless design ensures silent operation, making it suitable for noise-sensitive environments. With plug-and-play functionality, the TEG1008M is straightforward to set up, requiring no configuration or technical expertise. It supports advanced features like 802.3x flow control and jumbo frames, ensuring optimized data flow and minimal packet loss. The switch also incorporates energy-efficient technology to minimize power consumption without compromising performance. Whether you're upgrading your home office, expanding a business network, or setting up surveillance infrastructure, the Tenda TEG1008M delivers robust and high-speed connectivity with simplicity and reliability..The TEG1008M comes with 8 Gigabit Ethernet ports, designed for high-performance, unmanaged networking that simplifies setup and operation for small to medium-sized networks..Supports a data transfer rate of up to 1 Gbps per port, ensuring smooth and reliable performance for bandwidth-intensive tasks like video streaming and large file transfers..Features a compact desktop and wall-mountable design, offering flexibility in placement to fit various workspace requirements..Integrated port-based Quality of Service (QoS) capabilities allow prioritization of traffic to ensure smooth operation for critical applications..Offers a switching capacity of 16 Gbps with a packet forwarding rate of 12 Mpps, operating in store-and-forward mode for efficient and accurate data transmission..The TEG1008M is energy-efficient, consuming less than 3W under typical usage conditions, aided by innovative power-saving technology for reduced operational costs..Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3x standards, ensuring compatibility and performance in diverse network environments.
The GS110TPv3 eight-port Gigabit Ethernet Smart Managed Pro switch provides a great value, with configurable L2 network features like VLAN and PoE operation scheduling, allowing SMB customers to deploy PoE-based VoIP phones and IP surveillance. Advanced features such as Layer 3 static routing, IPv6 management, ACL, DiffServ QoS, LACP link aggregation and spanning tree will satisfy even the most advanced small business networks. Remote/cloud management capability with NETGEAR Insight. By activating the NETGEAR Insight cloud management, the users will enable fundamental management features allowing businesses to have simpler configuration and deployment from anywhere using the NETGEAR Insight app from mobile devices or the Insight Cloud Portal from any device with a web browser..Smart Gigabit Ethernet switch with cloud management provides LAN access for eight users.Eight 10/100/1000BASE-T RJ45 ports and two dedicated 1000BASE-X SFP fiber ports.Easy to manage via web-based management GUI or Smart Control Center.Bandwidth: 20Gb/s.Dimensions: 1.1"H x 9.3"W x 4"D.69.5W maximum power consumption (with all ports used, full PoE, line-rate traffic); 15.1W maximum power consumption (with all ports used, line-rate traffic); 4.3W minimum power consumption (link-down standby); features IEEE 802.3az for maximum power savings.Fanless design allows for silent operation, great for deployment in noise-sensitive environments.Features VESA holes for desktop and wall-mounting.Flexible and cost-effective solution for SMB data, voice, and video converged network.55W PoE budget is available across eight Gigabit PoE+ (802.3at/802.3af) ports.Layer 3 static routing with 32 routes (IPv4) for inter-VLAN local routing.Advanced VLAN support for better network segmentation.IGMP Snooping and Querier for multicast optimization.Auto DoS prevention.RMON and SNMP v1, v2c, v3 remote monitoring.L2/L3/L4 access control lists for granular network access control including 802.1x port authentication.Advanced QoS for traffic prioritization including port-based, 802.1p, and L2/L3/L4 DSCP-based.Advanced per-port PoE controls for remote power management of PoE connected devices including operation scheduling.Remote/cloud management capability with NETGEAR Insight app.Lifetime manufacturer limited warranty; 2-year manufacturer limited warranty on power adapter
Netgear 300 Series Gigabit Ethernet unmanaged switches provide easy, reliable, and affordable network connectivity for home and small offices. They are easy to use, reliable, and rugged with metal enclosures. With these unmanaged plug-and-play switches, you can expand your network connections to multiple devices instantly.This unmanaged switch includes eight 10/100/1000Mbps ports.Provides up to 16Gbps of non-blocking bandwidth.Install your switch on your desktop, or mount it to your wall.Offers 802.1p QoS for traffic/frame prioritization.Non-blocking switching architecture for maximum throughput at wire speed.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceeds the CE, FCC, IC, RCM, VCCI, KC, CB, and CE LVD standards.Auto MDI/MDIX eliminates the need for crossover cables.LED indicators for ease of use.Fanless design for silent operation.Auto negotiation for automatic connection at the highest common speed between the switch and end device.Fanless design for silent operation.Plug-and-play feature allows you to easily set up the switch: no software or configuration is necessary, and maintenance is next to zero.Durable and rugged metal case for long-lasting use.Perfect for small office and home networks.Standards-based technology ensures interoperability with any standards-based devices in the existing network.3-year manufacturer limited warranty
The Tenda TEG1016D is a high-performance unmanaged Gigabit Ethernet switch designed for small to medium-sized businesses, community networks, and industrial applications. With 16 auto-negotiating 10/100/1000 Mbps RJ45 ports, it provides robust and reliable network connectivity to handle bandwidth-intensive tasks, including large file transfers and stable video streaming. The switch boasts a switching capacity of 32 Gbps, ensuring seamless data transmission across all connected devices, and supports jumbo frames up to 9 KB, making it suitable for applications that require high throughput. The device includes an 8K MAC address table, enhancing its capability to manage multiple network devices simultaneously. Housed in a durable 13-inch metal casing, the TEG1016D offers versatile mounting options for desktop, wall, or rack installation, ensuring it fits various environments. It is fanless for silent operation, making it ideal for noise-sensitive settings. Furthermore, its 6 kV lightning protection shields both ports and the power supply from electrical surges, providing stability and durability even in harsh environments. With plug-and-play functionality, no technical configuration is needed, simplifying installation for users. Designed with low power consumption (≤10W) and advanced cooling, it is energy-efficient while maintaining reliable performance. The TEG1016D adheres to industry standards like IEEE 802.3, 802.3u, and 802.3ab, ensuring compatibility with a wide range of network devices. Whether used in an office, factory, or residential setting, the TEG1016D delivers stable, high-speed network connectivity with minimal maintenance, making it a cost-effective solution for enhancing your network infrastructure..Equipped with 16 auto-negotiating 10/100/1000 Mbps Gigabit Ethernet ports, the TEG1016D is a high-performance, unmanaged switch designed for small to medium-sized networks..The TEG1016D does not support Power over Ethernet (PoE), making it ideal for applications that do not require powered devices..Offers a maximum data transfer rate of 1 Gbps per port and a total switching capacity of 32 Gbps for fast and efficient communication..Designed with a compact and durable 13-inch metal casing, it supports desktop, wall, and rack mounting for flexible installation..This model does not include wireless connectivity and is dedicated to wired Ethernet connections for stable and high-speed networking..The TEG1016D does not include SNMP (Simple Network Management Protocol) support, as it is a fully unmanaged switch..Supports basic Quality of Service (QoS) features through IEEE 802.1p prioritization, ensuring smooth traffic handling for critical applications..Features plug-and-play functionality with no configuration required and includes 6 kV lightning protection to safeguard against electrical surges..Delivers a packet forwarding rate of 23.8 Mpps with full-duplex support, optimizing throughput for bandwidth-intensive operations..Operates with low power consumption, using ≤10W under full load, and employs a fanless design for silent and energy-efficient performance..Certified for CE, FCC, and RoHS standards, the TEG1016D adheres to international safety and environmental guidelines while supporting IEEE 802.3, 802.3u, 802.3ab, and 802.3x protocols.
The Netgear 300 Series Gigabit Ethernet unmanaged switch with PoE provides easy, reliable, and affordable network connectivity for home and small offices. With this unmanaged plug-and-play switch, you can expand your network connections to multiple devices instantly. The SOHO gigabit PoE unmanaged switch supports Netgear's FlexPoE exclusive upgradeable PoE feature. Powered by the flexible integrated PoE+ technology, you can increase or decrease the PoE budget by simply purchasing a new Netgear FlexPoE power supply, effectively future-proofing small business networks and budgets. This unmanaged switch contains eight PoE+ ports with 83W total power budget, and includes Netgear FlexPoE, making it expandable to 123W (with separately purchased power supply module)..Unmanaged switch with eight ports provides gigabit Ethernet connectivity to your devices.Provides a total power budget of 83W (up to 30W per port) to power wireless access points, IP cameras, IP phones, and much more; upgradable to 123W PoE+ budget with an additional power supply module.Install your switch on your desktop, or mount it to the wall (wall mount kit included).Quality of Service (QoS) for traffic prioritization.Non-blocking switching architecture for maximum throughput at wire speed.Energy-efficient technology for power savings.Meets or exceed the CE Mark, FCC Part 15 Class A, IC Class B, RCM, VCCI, CB, and CE LVD standards.Auto MDI/MDIX eliminates the need for crossover cables.LED indicators for ease of use.Fanless design for silent operation.Auto negotiation for automatic connection at the highest common speed between the switch and end device.Plug-and-play, no setup required.Durable and rugged metal case for long-lasting use.Great for small office and home networks.Dimensions: 1.1"H x 6.2"W x 4"D.Standards-based technology ensures interoperability with any standards-based devices in the existing network.Box contains: unmanaged PoE Gigabit Ethernet switch, power adapter/cord (localized to the North America region), rubber foot pads for desktop installation, wall mount kit, installation guide.3-year manufacturer limited warranty
The D-Link DGS-1100 series' web user interface gives administrators an easy way to manage Layer 2 features, such as VLANs, Spanning Tree Protocol (STP), and link aggregation (desktop models utilize Static Trunk). With powerful security features including IGMP snooping, Static MAC, and Storm Control, these smart-managed switches are a versatile solution for deployments that require easy-to-configure functionality without added complexities. D-Link's free Network Assistant (DNA) utility displays all your connected devices and makes first-time configuration a breeze. The free D-View 7 Network Management System comes with a license for 25 nodes and two probes and full access to the management tools. The desktop models in the series utilize a fanless design, for silent and energy-efficient operation..Eight-port gigabit smart managed switch is a powerful and flexible networking solution for small, medium, and enterprise businesses.Switching capacity: 16Gbps; packet forwarding rate: 11.9Mpps.Comes in a compact fanless desktop design for silent and energy-efficient operation.Features a complete web interface for comprehensive switch management.Free D-View 7 Network Management System comes with a license for 25 nodes, two probes, and full access to the management tools.Maximum power consumption: 4.94W.With powerful security features including IGMP snooping, Static MAC, and Storm Control, these smart managed switches are a versatile solution for deployments that require easy to configure functionality without added complexities.Features Loopback Detection and Cable Diagnostics to help network administrators find and solve network problems quickly and easily.Loopback Detection detects loops created by a specific port and automatically shuts it down.Cable Diagnostics feature is designed for network administrators to quickly examine the quality of the copper cables, recognize the cable type, and detect cable errors.Advanced D-Link Green technology allows to save power without sacrificing performance.Supports half/full-duplex operation (half at 10/100 Mbps, full at 1000 Mbps).IEEE 802.3az compliant and features Link Status detection.Lifetime manufacturer limited warranty
The TRENDnet TEG-204WS 20-port Gigabit Ethernet rack mountable web smart switch in black, has fanless design and delivers advanced management features with a 40 Gbps switching capacity. It has 16 x Gigabit ports and 4 x shared Gigabit ports (RJ-45/SFP). This switch features local dial in user authentication, 802.1X Port-Based network access control, RADIUS and TACACS+ security systems. It is suitable for traffic control, troubleshooting, access controls and monitoring..Gigabit Ethernet web smart switch provides faster throughput.Ports: (16) Gigabit ports, (4) shared Gigabit ports (RJ-45/SFP).Management: HTTP/HTTPS (SSL v2/3 TLS) web based GUI, SNMP v1, v2c, v3, RMON v1, static unicast Mac address, security: Local dial in user.Dimensions: 1.7"H x 11"W x 7"D.Power consumption: 14.6 W (maximum).Certifications and standards: Meets CE, FCC and UL standards.Has fanless design.Input voltage: 100 to 240 VAC, 50/60 Hz, internal power supply.Form factor: 1U rack mountable, color: Black.Data transfer rate: 20 Mbps (full duplex) Ethernet, 200 Mbps (full duplex) Fast Ethernet, 2000 Mbps (full duplex) Gigabit Ethernet.RAM buffer: 512KB, Mac address table: 8K entries, jumbo frames: 10KB, forwarding rate: 29.8 Mpps (64 byte packet size).Layer supported: 2, media type supported: Twisted pair, optical fiber, network technology: 10/100/1000Base-T, 1000Base-X.Port mirror: RX, TX or both, one-to-one, protocols: IP protocol 0-255, TCP/UDP port 1-65535.Compatible with optional software utility Windows 10, 8.1, 8, 7, Vista, XP, Windows 2003/2008 server.Includes quick installation guide, CD-ROM (utility and users guide), 6' power cord and rack mount kit.Features IPv6, LACP, VLAN, QoS and IGMP snooping, private and voice VLAN support, metal housing and 802.3ad dynamic LACP.Weight: 3.88 lbs..Comes with 3 year warranty
The GS108Tv3 eight-port Gigabit Ethernet Smart Managed Pro switch provides a great value, with flexible and cost-effective solution for SMB data, voice, and video converged network. Advanced features such as Layer 3 static routing, IPv6 management, ACL, DiffServ QoS, LACP link aggregation and spanning tree will satisfy even the most advanced small business networks. Remote/cloud management capability with NETGEAR Insight. By activating the NETGEAR Insight cloud management, the users will enable fundamental management features allowing businesses to have simpler configuration and deployment from anywhere using the NETGEAR Insight app from mobile devices or the Insight Cloud Portal from any device with a web browser..Smart Gigabit Ethernet switch with cloud management provides LAN access for eight users.Eight 10/100/1000BASE-T RJ45 ports.Easy to manage via web-based management GUI or Smart Control Center.Bandwidth: 16Gbps.Dimensions: 1.1"H x 6.2"W x 4"D.5.5W maximum power consumption (with all ports used, line-rate traffic); 1.9W minimum power consumption (link-down standby); features IEEE 802.3az for maximum power savings.Fanless design allows for silent operation, great for deployment in noise-sensitive environments.Features VESA holes for desktop and wall-mounting.Flexible and cost-effective solution for SMB data, voice, and video converged network.Features one PD port to receive power from another PoE switch or injector.Layer 3 static routing with 32 routes (IPv4) for inter-VLAN local routing.Advanced VLAN support for better network segmentation.IGMP Snooping and Querier for multicast optimization.Rate limiting and priority queuing for better bandwidth allocation.Auto DoS prevention.RMON and SNMP v1, v2c, v3 remote monitoring.L2/L3/L4 access control lists for granular network access control including 802.1x port authentication.Advanced QoS for traffic prioritization including port-based, 802.1p, and L2/L3/L4 DSCP-based.Remote/cloud management capability with NETGEAR Insight app.Lifetime manufacturer limited warranty; 2-year manufacturer limited warranty on power adapter
Supports the needs of edge networking and automated management of prioritized voice, video, and data traffic..8 Gigabit Ethernet ports.Management software with easy-to-use GUI interface offers refined control for secure setup, access, and SNMP (NMS 300) management..The fanless design means zero added noise wherever its located, making it ideal for noise-sensitive environments.Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode..Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance..Dimensions in Inches: 6.2L x 4W x 1.1H; Weight in Pounds: 1
The EX4100-F-12P, which is a compact, fanless switch offering 12 x 1GbE Power over Ethernet Plus (PoE+) access ports and delivering up to 30W per port with a total of 180W of PoE power budget with an external power adapter. EX4100-F-12P can also be powered from an external 90W power sourcing equipment (PSE) device connected via the uplink port. Additional 90W of PoE budget is available if the second uplink port is connected to a PSE device. With external power adapter and the two uplink ports connected to 90W external PSE, total PoE power budget supported is up to 300W..Managed switch with 12 x 10/100/1000BASE-T PoE+, 2 x 100Mb/1GbE/2.5GbE/5GbE/10GbE uplinks, 4 x 10GbE stacking/uplink ports, with Standard SW ports.The EX4100-F-12P fanless switch offering 12 x 1GbE PoE+ access ports and delivering up to 30W per port with a total of 180W of PoE power budget with an external power adapter.Features 256Gbps switching capacity.Comes in 1 RU form factor.SNMP: v1, v2c, v3; RFC 1157 SNMPv1, RFC 2011 SNMPv2 for Internet Protocol using SMIv2, RFC 2012 SNMPv2 for transmission control protocol using SMIv2.Quality of Service (QoS): L2 QoS, L3 QoS, ingress policing: one rate two color, 12 hardware queues per port (eight unicast plus four multicast), Strict priority (SP) and weighted deficit round-robin (WDRR) scheduling methods (egress), 802.1p, (DSCP)/IP precedence trust and marking, L2-L4 classification criteria.Meets or exceeds the CAN/CSA-C22.2 No. 62368-1 and 60950-1, UL 62368-1 and 60950-1, IEC 62368-1 and 60950-1 (All country deviations): CB Scheme report, IEC 62368-3 for USB and PoE: CB Scheme report, CFR, Title 21, Chapter 1, Subchapter J, Part 1040, REDR c 1370 OR CAN/CSA-E 60825-1- Part 1, IEC 60825-1, IEC 60825-2, and TAA standards.Onboard (day 0), provision (day 1), and manage (day 2+) the EX4100-F from the cloud with Juniper Mist Wired Assurance, using AI-driven automation and insights to deliver improved experiences for IT staff, end users, and connected devices.Streamline IT operations, reduce mean time to repair, and deliver a new generation of wired and wireless networks; the EX4100-F provides rich streaming telemetry data for insights into switch health and wired service-level expectations (SLEs) for pre- and post-connection metrics.Scale with ease, build resiliency, and streamline management with Virtual Chassis and EVPN-VXLAN-based campus fabrics, which help to simplify configuring and maintaining multiple devices.Standards-based micro segmentation using group-based policies (GBP) leverages underlying VXLAN technology to provide agnostic endpoint access control for consistent security policies and granular control of application, business function, or user tags.Take segmentation to the next level by separating traffic within the same VLAN so IoT devices or users can traverse any port or switch within the network; maintain the same security policies without having to manually configure them each time.Enables per-flow level analytics, so you can monitor thousands of traffic flows per switch without impacting the CPU.Dimensions: 1.75"H x 10.59"W x 9.66"D.Lifetime manufacturer limited warranty
D-Link® WebSmart Managed gigabit ethernet switch features gigabit Ethernet technology and 10/100/1000base-T network technology respectively. Switch has storm control which protects against broadcast, multicast and unknown unicast storm..28-ports 10/100/1000Base-T gigabit Ethernet, fast Ethernet.Address database size: 16000 MAC addresses.Managed switch.Total Number of network ports: 24, Number of network (RJ-45) ports: 24.Media type supported: Twisted-pair, Ethernet technology: Gigabit Ethernet, fast Ethernet, Network technology: 10/100/1000Base-T.Number of total expansion slots: 4, Number of SFP slots: 4.Standard memory: 128MB, memory technology: DDR2 SDRAM, flash memory: 16MB.Performance: Switching capacity: 56 Gbps, forwarding performance: 41.7 Mpps.Jumbo frame support: 10000, MTBF: 236739 hrs.Remote management protocol: SNMP 1, SNMP 2, Telnet, SNMP 3, SNMP 2c, HTTP, CLI.Interfaces: 24 x 1000Base-T - RJ-45, 4 x SFP (mini-GBIC).Eco-friendly operation with D-Link green technology, web based management and auto discovery utility, true plug and play.Fanless design for quiet operation, fiber media support via 4 dedicated SFPs, DSCP and QoS with auto voice VLANs for VoIP, advanced security features, IPv4/IPv6 dual-stack.Displays MAC address, IP address, DHCP hostname, insight plus will report client security, time when device was last seen transmitting data on the network.Input voltage: 110 VAC, 220 VAC, Power source: Power supply.Operating temperature: 32 - 122 deg F, Operating humidity: 0 - 95%.Certifications and standards: IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x.Warranty: Lifetime limited.D-Link® WebSmart Managed gigabit ethernet switch with a standard memory of 128 MB requires an input voltage of 110/220 VAC and has 24 network ports.
Ubiquiti UniFi is a configurable Gigabit Layer 2 switch with twenty-four Gigabit Ethernet ports including sixteen auto-sensing 802.3at PoE+ ports, and two SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options to your enterprise network. Features a 1.3" touch LCM to provide status information. With a depth of 7.9", the compact fanless design can be easily installed in a SOHO rack cabinet. Managed and configured by the UniFi Network Controller with UniFi mobile app support, the switch offers an extensive suite of advanced Layer 2 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere. FP ports enable network uplinks of up to 1 Gbps. The UniFi PoE Switch features fanless, silent thermal cooling, so it can be located in any workspace..Configurable Gigabit Layer 2 switch with 24 Gigabit Ethernet ports including 16 auto-sensing 802.3at PoE+ ports, and two SFP ports.Contains 24 10/100/1000 RJ45 ports and two 1G SFP Ethernet ports.Managed and configured by the UniFi Network Controller with UniFi mobile app support, the switch offers an extensive suite of advanced Layer 2 switching protocols and features.Dimensions: 1.72"H x 16.71"W x 7.87"D.Max. power consumption (excluding PoE output): 18W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.1.3" touch screen displays status information for easy monitoring and quick troubleshooting.Quiet cooling for any workspace.SFP ports enable network uplinks of up to 1 Gbps.Features fanless, silent thermal cooling, so it can be deployed in areas where fan noise would be distracting..Offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss.Comes in silver.2-year manufacturer limited warranty
The Aruba Instant On 1430 switch series is an unmanaged Layer 2 Gigabit Ethernet switch series ready to deploy in seven models in PoE and non-PoE configurations: one (1) 5-port, two (2) 8-port, two (2) 16-port, one (1) 24-port, and one (1) 26-port model with 2 SFP uplinks models. The Aruba Instant On 1430 switch series models are easy to use with zero configuration and no required ongoing administration. The unmanaged PoE models deliver fully automated support for powering compatible IP phones, video surveillance cameras, or wireless access points. The Aruba Instant On 1430 switch series supports Energy Efficient Ethernet (EEE) and is compliant with 802.3az standard requirements to save energy during periods of low data activity. All models are fanless for silent operation in office settings or acoustically sensitive environments and require less power to operate..Unmanaged layer 2 Gigabit Ethernet switch features 16 RJ-45 autosensing 10/100/1000 ports.Quality of Service provides priority of time-sensitive packets (like VoIP and video) over other traffic based on DSCP or IEEE 802.1p classification.Supports Energy Efficient Ethernet (EEE) and is compliant with 802.3az standard requirements to save energy during periods of low data activity.Throughput: 23.80Mpps maximum; switching capacity: 32Gbps.Power consumption: 7.9W maximum, 2.3W idle.Powered by a 128kB EEPROM processor and features a 2MB packet buffer size.Simplified cabling automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports using Auto MDI/MDI-X.Jumbo frame support provides up to 9216 bytes frame size to improve the performance of large data transfers.Fan-less design for silent deployment in office spaces.Flow control provides a flow-throttling mechanism propagated through the network to prevent packet loss at a congested node.Lifetime manufacturer limited warranty
Introducing the NETGEAR GS116LP 16-Port Gigabit Ethernet Unmanaged Switch with 76W PoE budget. The Industry's first flexible PoE+ integrated technology allows you to increase or decrease the PoE budget at any time to provide to your devices the power that they need with interchangeable external power supply and an intuitive power selector. The compact and fanless design makes the GS116LP the ideal cost-effective and future-proof solution for any home or business environment..16-port gigabit unmanaged switch helps businesses cost-effectively increase power budget to expand their network.PoE+ ports provide a total of 76W of power, so you can power and connect your devices with a single wire.1Gbps data transfer rate per port.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceed the 47 CFR FCC Part 15, SubpartB, Class A; ICES-003:2016 Issue 6, Class A; ANSI C63.4:2014; 55032:2012+AC:2013, Class A; EN 55024:2010; EN 61000-3-2:2014, Class A; EN 61000-3-3:2013; AS/NZS CISPR 32:2015, Class A; VCCI-CISPR 32:2016, Class A; KN 35; CNS 13438; Electromagnetic Compliance Class A standards.Upgradable PoE budget with interchangeable power supplies.Small form factor and quiet operation.Plug-and-play automatic connectivity to your router or modem.PoE power per port: up to 15.4W for 802.3af and up to 30W for 802.3at.Lifetime manufacturer limited warranty.Plug-and-play Switches for Businesses in Need of Instant Connectivity.
Introducing the NETGEAR GS116LP 16-Port Gigabit Ethernet Unmanaged Switch with 76W PoE budget. The Industry's first flexible PoE+ integrated technology allows you to increase or decrease the PoE budget at any time to provide to your devices the power that they need with interchangeable external power supply and an intuitive power selector. The compact and fanless design makes the GS116LP the ideal cost-effective and future-proof solution for any home or business environment..16-port gigabit unmanaged switch helps businesses cost-effectively increase power budget to expand their network.PoE+ ports provide a total of 76W of power, so you can power and connect your devices with a single wire.1Gbps data transfer rate per port.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceed the 47 CFR FCC Part 15, SubpartB, Class A; ICES-003:2016 Issue 6, Class A; ANSI C63.4:2014; 55032:2012+AC:2013, Class A; EN 55024:2010; EN 61000-3-2:2014, Class A; EN 61000-3-3:2013; AS/NZS CISPR 32:2015, Class A; VCCI-CISPR 32:2016, Class A; KN 35; CNS 13438; Electromagnetic Compliance Class A standards.Upgradable PoE budget with interchangeable power supplies.Small form factor and quiet operation.Plug-and-play automatic connectivity to your router or modem.PoE power per port: up to 15.4W for 802.3af and up to 30W for 802.3at.Lifetime manufacturer limited warranty.Plug-and-play Switches for Businesses in Need of Instant Connectivity.
The 5-Port Gigabit Ethernet Switch from Intellinet Network Solutions® is ideal for home offices and small-size businesses looking for a durable switch that is reliable and easy to install. Small and powerful, this Gigabit Switch is easy to install and connects up to 5 computers, servers, printers, switches, or any other Ethernet devices at 10, 100 or 1000 Mbps over Ethernet cables, and it works with any operating system. The auto features of this switch make installation plug and play and hassle-free. Plus, it has Green Ethernet technology, allowing it to monitor power usage and turn off unused ports to save electricity..Compact switch with 5 Gigabit ports to expand your network in an instant.Easy plug-and-play installation - simply power it up and start using it.Green Ethernet power-saving technology deactivates unused ports.Five 10/100/1000 auto-sensing ports automatically detect optimal network speeds.Supports any combination of 10-Mbps, 100-Mbps, or 1-Gbps network devices.Switch fabric of 10 Gbps.Supports 2k MAC address entries with Auto-Learning and Auto-Aging.Buffer memory of 1.5 MBytes.Supports jumbo frames up to 16 KBytes.Ultra-compact design.Fanless design is ideal for silent operation.Store and forward switching architecture.Fully NDAA-compliant.3-year warranty.Includes power adapter and quick instruction guide
Boost your small business or home office network with the NETGEAR GS108PP 8-Port Gigabit Ethernet Unmanaged Switch, delivering reliable plug-and-play connectivity with 8 high-speed Gigabit ports and a total of 123W PoE+ power - ideal for powering IP cameras, VoIP phones, wireless access points, and other PoE-enabled devices. Housed in a durable metal casing and designed for silent operation, this compact switch supports desktop or wall-mount placement, making it perfect for noise-sensitive environments. With energy-efficient technology, lifetime limited hardware warranty, and no software configuration required, the GS108PP offers a hassle-free, cost-effective solution for expanding your wired network with maximum performance and minimal effort..PLUG AND PLAY - Simple set up with no software or configuration needed.POWER-OVER-ETHERNET - 8 Gigabit PoE+ ports (802.3af and 802.3at) providing up to 30w per port with 120w total PoE power budget.FLEXIBLE MOUNTING – Rack ,Desktop or Wall-Mount to be used in any environment.FLEXIBLE POWER - Interchangeable External Power Supply (60W, 90W, 120W) that allows to increase or decrease your PoE Budget.SMALL AND SILENT - Small, sturdy metal case and fanless quiet operation.ProSAFE Lifetime Protection - Lifetime Limited Hardware warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert.Introducing the industry’s first flexible PoE+ 8-Port Gigabit Unmanaged Switch
The NETGEAR GS108PP 8‑Port PoE/PoE+ Gigabit Ethernet Unmanaged Switch delivers high‑performance, plug‑and‑play connectivity for small businesses, smart‑home networks, and professional installations. Equipped with eight Gigabit PoE+ ports and a robust 123W total PoE power budget, it provides reliable power and data to IP cameras, VoIP phones, wireless access points, and other PoE‑enabled devices. Its fanless, metal enclosure ensures silent operation and long‑term durability, while versatile desktop, wall‑mount, and rackmount options make it easy to deploy in any environment. NETGEAR’s FlexPoE design allows the power budget to be adjusted when using optional power supplies, maximizing flexibility as network demands grow. With energy‑efficient technology, automatic traffic prioritization, and true plug‑and‑play simplicity, the GS108PP offers dependable 1GbE performance and cost‑effective PoE expansion for modern connected spaces..PLUG AND PLAY - Simple set up with no software or configuration needed.POWER-OVER-ETHERNET - 8 Gigabit PoE+ ports (802.3af and 802.3at) providing up to 30w per port with 120w total PoE power budget.FLEXIBLE MOUNTING – Rack ,Desktop or Wall-Mount to be used in any environment.FLEXIBLE POWER - Interchangeable External Power Supply (60W, 90W, 120W) that allows to increase or decrease your PoE Budget.SMALL AND SILENT - Small, sturdy metal case and fanless quiet operation.ProSAFE Lifetime Protection - Lifetime Limited Hardware warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert.Introducing the industry’s first flexible PoE+ 8-Port Gigabit Unmanaged Switch
The Aruba Instant On 1430 switch series is an unmanaged Layer 2 Gigabit Ethernet switch series ready to deploy in seven models in PoE and non-PoE configurations: one (1) 5-port, two (2) 8-port, two (2) 16-port, one (1) 24-port, and one (1) 26-port model with 2 SFP uplinks models. The Aruba Instant On 1430 switch series models are easy to use with zero configuration and no required ongoing administration. The unmanaged PoE models deliver fully automated support for powering compatible IP phones, video surveillance cameras, or wireless access points. The Aruba Instant On 1430 switch series supports Energy Efficient Ethernet (EEE) and is compliant with 802.3az standard requirements to save energy during periods of low data activity. All models are fanless for silent operation in office settings or acoustically sensitive environments and require less power to operate..Unmanaged layer 2 Gigabit Ethernet switch features five RJ-45 autosensing 10/100/1000 ports.Quality of Service provides priority of time-sensitive packets (like VoIP and video) over other traffic based on DSCP or IEEE 802.1p classification.Supports Energy Efficient Ethernet (EEE) and is compliant with 802.3az standard requirements to save energy during periods of low data activity.Throughput: 7.44Mpps maximum; switching capacity: 10Gbps.Power consumption: 12W maximum, 1W idle.Powered by a 2kB EEPROM processor and features a 1MB packet buffer size.Simplified cabling automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports using Auto MDI/MDI-X.Jumbo frame support provides up to 9216 bytes frame size to improve the performance of large data transfers.Fan-less design for silent deployment in office spaces.Flow control provides a flow-throttling mechanism propagated through the network to prevent packet loss at a congested node.Lifetime manufacturer limited warranty
Ubiquiti UniFi configurable Gigabit Layer 2 switch with 48 Gigabit Ethernet ports and four SFP ports, providing 1 Gigabit links to your devices and fiber uplink options to your enterprise network. It features a 1.3" touch LCM, a nd a fanless design. The LCM provides current switch states and the necessary information you need for quick diagnosis. Managed and configured by the UniFi Network Controller a nd mobile app, the UniFi switch offers an extensive suite of advanced Layer 2 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere..Configurable Gigabit Layer 2 switch with 48 Gigabit Ethernet ports and four SFP ports, providing 1Gbps links to your devices and fiber uplink options to your enterprise network.48 gigabit ports provide a 52Gbps switching capacity.Rack-mountable for convenient use.Works with the UniFi Network Application.Meets or exceeds CE, FCC, IC standards.Features a 1.3" LCM color touch screen with AR switch management
The TP-Link LiteWave Series Unmanaged Switches provide easy and affordable way to expand your wired network. They are easy to use and reliable. With these plug-and-play switches, you can expand your network connections to multiple devices instantly. With all ports support Auto-MDI/MDIX, there's no need to worry about the type of cable to use..Number of Ethernet Ports 5, Network Management Type Unmanaged.Network Technology: 10/100/1000Base-T.Ethernet Technology: Gigabit Ethernet.Switch Form Factor: Desktop, Wall Mountable.Wireless Connectivity: Not Applicable.Power Source: Power Adapter.Power Consumption: 3.70 W.2 Year Warranty
The Aruba CX 4100i switch series is a modern family of ruggedized Ethernet switches ideal for connecting IoT, access points, and user devices in harsh environments. Created for high performance, reliable, and access with enhanced security, the Aruba CX 4100i switches provide versatile deployment options for enterprise networks extending beyond carpeted areas to challenging outdoor and industrial spaces. Based on the programmable AOS-CX operating system used across the Aruba CX portfolio, this IP30 ruggedized series helps deliver a more consistent, more efficient operator experience. This Layer 2 series has convenient built-in high-speed uplinks, supports both 30W and 60W PoE, and is ready for deployment with fan less 12 port DIN mount and 24 port 1U rack mount models. With robust QoS, support for static routing, and IPv6, the Aruba CX 4100i also simplifies ownership with no switch software licensing requirements..High-performance ruggedized Ethernet switch is great for connecting IoT, access points, and user devices in harsh environments..Features 4 x 100M/1G BaseT Class 6 PoE ports supporting up to 60W per port, 20 x 100M/1G BaseT Class 4 PoE ports supporting up to 30W per port, and 4 x 1G/10G SFP ports.Switching capacity: up to 128Gbps; routing throughput: up to 95Mpps.Mounts to an EIA/TIA standard 19" telco rack (mounting brackets included with product).SNMPv1/v2c/v3 support provides read capability of industry-standard Management Information Base (MIB), and private extensions.With robust QoS, support for static routing, and IPv6, it also simplifies ownership with no switch software licensing requirements.Management flexibility with support for Aruba Central, easy-to-use Web GUI, CLI, and Aruba NetEdit.Fixed internal power supply (300W); power consumption is 23W.Versatile form factors deliver both 30W and 60W PoE to optimize IoT power.Built-in high-speed 1/10GbE uplinks for demanding applications.Robust protection for sub-station applications and high tolerances for railway rolling stock, signaling and telecommunications.Secure and simple access for IoT and users with Aruba Dynamic Segmentation.Management flexibility with support for Aruba Central, easy-to-use Web GUI, CLI, and Aruba NetEdit.No switch software licensing required.5-year manufacturer limited warranty
Aruba Instant On 1830 switch series is an affordable, easy to deploy, smart-managed switch series for small businesses looking for a cost-effective ways to keep up with evolving network demands. These are entry-level switches offering Layer 2 switching capabilities, Gigabit connectivity along with flexible management modes — all at an affordable price point..Affordable, easy-to-deploy, smart-managed Gigabit switch for small businesses looking for cost-effective ways to keep up with evolving network demands.This model has 24 x RJ45 10/100/1000 ports and 2 x SFP 1GbE ports.Use the Instant On mobile app, cloud-based web portal, or the local web GU to quickly setup, monitor, and manage the device.Throughput: 38.68Mpps maximum; switching capacity: 52Gbps.Dimensions: 1.73"H x 17.44"W x 8.5"D.Power consumption at 100-127V: 19.1W maximum, 7.6W idle; at 200-220V: 19W maximum, 7.8W idle.Certifications and standards: Meets or exceeds the UL 62368-1 2nd. and 3rd. Ed, FCC CFR 47 Part 15: 2018 Class A standards.Powered by ARM Cortex-A9 800MHz, 512MB SDRAM, 256MB flash memory, and 1.5MB packet buffer memory.Compact and fanless model for acoustically sensitive environments.Lifetime manufacturer limited warranty
Netgear 300 Plus switches with PoE meets business networks growing need by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. These models support Power-Over-Ethernet (PoE) and can power devices such as VOIP phones, surveillance IP cameras, wireless access points and many other applications. These new PoE+ Gigabit Ethernet Plus switches models include uninterruptable PoE to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..Managed switch delivers essential business networking features and powers PoE+ devices such as VoIP phones, IP cameras, and more.Contains 16 x 10/100/1000 RJ45 copper ports (auto uplink).Business-friendly and easy-to-use web browser-based management GUI.Dimensions: 1.06"H x 11.26"W x 4.02"D.Certifications and standards: Meets or exceeds CE mark, FCC Part 15 class B, CE/EN55032/24, VCCI, ACMA, CSA safety, KC, BSMI standards.Fanless design for silent operation makes this switch perfect for noise-sensitive environments.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.16 ports provide up to 1000Mbps of dedicated, non-blocking bandwidth each.10Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.15 PoE+ ports provide a total of 231W of power so you can power and connect your devices with a single wire.Manage PoE prioritization, PoE power limit per port, PoE scheduling, and more for simple control over all PoE-powered devices.Simple, yet useful network set-up on top of plug-and-play connectivity.Quality of Service (QoS) for traffic prioritization.Port mirroring for network monitoring.Rate limiting for better bandwidth allocation.Features auto "denial-of-service" (DoS) prevention, troubleshoot connection issues via cable test, loop prevention, loop detection, broadcast storm controls.5-year manufacturer limited warranty
Expand and power your network with the UniFi PoE switch, part of the Ubiquiti UniFi Enterprise System. The UniFi PoE switch features fanless, silent thermal cooling, so it can be deployed in areas where fan noise would be distracting..This smart switch contains 32 x Gigabit RJ45 ports with 802.3af/at, 16 x Gigabit RJ45 ports, and 4 x 1G SFP ports.PoE support simplifies your network infrastructure and cabling; PoE ports offer 802.3af/at to power your PoE devices, such as UniFi APs and cameras.Provides up to 104Gbps of switching capacity.Rack-mountable for convenient use.UniFi Network Controller can provision UniFi devices, map out networks, and quickly manage system traffic. Important network details are logically organized for a simplified, yet powerful, interface.Maximum power consumption: 45W.Meets or exceeds CE, FCC, IC standards.Offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss.SFP ports enable network uplinks up to 1Gbps.Features a 1.3" LCM color touch screen with AR switch management.2-year manufacturer limited warranty
The Aruba CX 6100 Switch Series is a modern family of entry level access switches perfect for branch offices, mid-market enterprise, and SMB networks. Designed for reliable, simple, and secure access, the Aruba CX 6100 switches provide a convenient wired access solution for enterprise networks supporting IoT, mobile, and cloud applications. Prepare your network for tomorrow's unpredictable demands with a powerful Aruba ASIC architecture and programmable AOS-CX operating system used across the Aruba CX portfolio to deliver a more consistent, more efficient operator experience. This layer 2 switch series has convenient built-in high speed uplinks with up to 139W of IEEE 802.3at Class 4 PoE to support IoT devices such as security cameras and wireless APs. A compact and fanless 12 port model is perfect for use in quiet work spaces. With robust QoS, support for static routing, and IPv6, the Aruba CX 6100 also simplifies ownership with no switch software licensing requirements..Simplify IT operations with managed Gigabit Ethernet rack mountable switch that provides entry level, reliable, and convenient wired access connectivity.12 10/100/1000BASE-T port model with 2 convenient built-in 1/10 GbE SFP port uplinks and up to 139W of Class 4 PoE.Flexibility to manage and simplify configurations with Aruba Central, Aruba NetEdit, easy to use Web GUI, or industry standard CLI.Throughput: 45.1 Mpps.Dimensions: 1.73"H x 10"W x 10.04"D.Power consumption: 16W idle, 21.9W without PoE, 170W with PoE.Using Aruba AOS-CX operating system across Aruba CX switching platforms and deployment domains provides a simpler, more consistent operator experience.Delivers Layer 2 capabilities with support static routing, ACLs, robust QoS, traffic prioritization, sFlow, and IPv6 support.Simplifies ownership with no switch software licensing or subscriptions required.Designed with Aruba ASICs that deliver very low latency, increased packet buffering, and adaptive power consumption
The NETGEAR GS105Ev2 Plus Desktop Switch features 5-Port Gigabit Ethernet, ProSAFE Lifetime Protection and more..5 Gigabit Ethernet ports.Management software with easy-to-use GUI interface offers basic capabilities to configure, secure, and monitor your network..Supports desktop or wall mount placement.The fanless design means zero added noise wherever its located, making it ideal for noise-sensitive environments.Covered by an industry-best Lifetime Limited Hardware Warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert; 2 years warranty on power adapter.Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode..Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance..Certifications and standards: CE, FCC Part 15, VCCI, RCM, KCC, EAC, CCC, CE LVD.NETGEAR Plus Switch
Aruba Instant On 1830 switch series is an affordable, easy to deploy, smart-managed switch series for small businesses looking for a cost-effective ways to keep up with evolving network demands. These are entry-level switches offering Layer 2 switching capabilities, Gigabit connectivity along with flexible management modes — all at an affordable price point..Affordable, easy-to-deploy, smart-managed Gigabit switch for small businesses looking for cost-effective ways to keep up with evolving network demands.This model has 8 x RJ45 10/100/1000 ports (4 with Class4 PoE support).Use the Instant On mobile app, cloud-based web portal, or the local web GU to quickly setup, monitor, and manage the device.Throughput: 11.9Mpps maximum; switching capacity: 16Gbps.Dimensions: 1.73"H x 7.68"W x 9.65"D.Power consumption at 100V-127V: 86.07W maximum, 8.3W idle; at 200V-220V: 83.67W maximum, 8.2W idle; PoE capability: 65W.Certifications and standards: Meets or exceeds the UL 62368-1 2nd. and 3rd. Ed, FCC CFR 47 Part 15: 2018 Class A standards.Powered by ARM Cortex-A9 800MHz, 512MB SDRAM, 256MB flash memory, and 1.5MB packet buffer memory.Compact and fanless model for acoustically sensitive environments.Lifetime manufacturer limited warranty
Zyxel 24 Port smart managed switch supports green Ethernet IEEE 802.3az with high-power PoE IEEE 802.3at standard. Switch has fanless design and contains 2 extra SFP slots to provide 100 M and GbE speeds for long-distance deployments..Number of Ethernet Ports 24, Performance Class & Network Management Type 2 Layer Supported.PoE: Not Applicable.Switching Bandwidth 52 Gb/s.Switch Form Factor: Desktop, Rack-mountable.Wireless Connectivity: Not Applicable.QoS for Traffic Prioritization.System Management: Managed Network Switch with SFP.Power Consumption: 16.00 W (Active)
The Aruba 2930F switch series is designed for customers creating smart digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. This convenient Layer 3 network switch includes built-in uplinks and PoE power and is simple to deploy and manage with advanced security and network management tools like Aruba ClearPass policy manager, Aruba AirWave, and cloud-based Aruba Central. This switch provides a convenient and cost-effective access switch solution that can be quickly set up with zero touch provisioning. The robust Layer 3 feature set includes a limited lifetime warranty..Fanless 12-port Gigabit Ethernet managed switch provides performance and ease of use for enterprise campuses, SMBs, and branch offices.Features 12 x RJ45 auto-sensing 10/100/1000 PoE+ ports, 2 x RJ45 auto-sensing 10/100/1000 ports, 2 x SFP+ 1/10GbE ports, and a dual-personality RJ45 serial console port.Switching capacity: 68Gbps.Comes in a 1U rack-mountable design.Power rating: 170W (maximum), 20W (idle).Supports advanced security and network management via Aruba ClearPass policy manager, Aruba AirWave, and Aruba Central.Throughput: up to 41.7Mpps.Maximum power consumption: 170 W (139W PoE+ power).Meets or exceeds the DoE VI, UL/CUL, and FCC CFR 47 Part 15 Class A standards.MAC address table size: 32768 entries.Packet buffer size: 12.38MB.Features a dual-core ARM Cortex A9 1016MHz CPU, 1GB DDR3 SDRAM, and 4GB eMMC memory.Lifetime manufacturer limited warranty
UniFi Aggregation Switch is a managed Layer 2 switch with eight 10G SFP+ ports. Featuring a compact 4.7" depth and fanless design, it supports high-bandwidth links to provide link aggregation for higher capacity and increased availability..Managed switch contains 8 x 10G SFP+ ports.Rack-mountable with mounting hardware (included).Supports up to 80Gbps of total non-blocking throughput, 160Gbps of switching capacity, and 119.04Mpps of forwarding rate.Maximum power consumption: 30W.Meets or exceeds the CE, FCC, and IC standards.Offers silent fanless cooling operation.Features a 1.3" touch-screen LCM display.Supported voltage range: 100-240VAC.36W AC-powered (power adapter is included).1-year manufacturer limited warranty
Introducing the NETGEAR GS116PP 16-Port Gigabit Ethernet Unmanaged Switch with 183W PoE budget . The Industry’s first flexible PoE+ integrated technology allows you to increase or decrease the PoE budget at any time to provide to your devices the power that they need with interchangeable external power supply and an intuitive power selector. The compact and fanless design makes the GS116PP the ideal cost-effective and future-proof solution for any home or business environment. A unique combination of features from Netgear makes this switch one of the most adaptive on the market..16-port gigabit unmanaged switch helps businesses cost-effectively increase power budget to expand their network.PoE+ ports provide a total of 183W of power, so you can power and connect your devices with a single wire.1Gbps data transfer rate per port.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceed the 47 CFR FCC Part 15, SubpartB, Class A; ICES-003:2016 Issue 6, Class A; ANSI C63.4:2014; 55032:2012+AC:2013, Class A; EN 55024:2010; EN 61000-3-2:2014, Class A; EN 61000-3-3:2013; AS/NZS CISPR 32:2015, Class A; VCCI-CISPR 32:2016, Class A; KN 35; CNS 13438; Electromagnetic Compliance Class A standards.Upgradable PoE budget with interchangeable power supplies.Small form factor and quiet operation.Plug-and-play automatic connectivity to your router or modem.PoE power per port: up to 15.4W for 802.3af and up to 30W for 802.3at.Lifetime manufacturer limited warranty.NETGEAR GS116PP is the industry’s first flexible PoE+ 16-Port Gigabit with a compact and fanless design.
Introducing the NETGEAR GS116PP 16-Port Gigabit Ethernet Unmanaged Switch with 183W PoE budget . The Industry’s first flexible PoE+ integrated technology allows you to increase or decrease the PoE budget at any time to provide to your devices the power that they need with interchangeable external power supply and an intuitive power selector. The compact and fanless design makes the GS116PP the ideal cost-effective and future-proof solution for any home or business environment. A unique combination of features from Netgear makes this switch one of the most adaptive on the market..16-port gigabit unmanaged switch helps businesses cost-effectively increase power budget to expand their network.PoE+ ports provide a total of 183W of power, so you can power and connect your devices with a single wire.1Gbps data transfer rate per port.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceed the 47 CFR FCC Part 15, SubpartB, Class A; ICES-003:2016 Issue 6, Class A; ANSI C63.4:2014; 55032:2012+AC:2013, Class A; EN 55024:2010; EN 61000-3-2:2014, Class A; EN 61000-3-3:2013; AS/NZS CISPR 32:2015, Class A; VCCI-CISPR 32:2016, Class A; KN 35; CNS 13438; Electromagnetic Compliance Class A standards.Upgradable PoE budget with interchangeable power supplies.Small form factor and quiet operation.Plug-and-play automatic connectivity to your router or modem.PoE power per port: up to 15.4W for 802.3af and up to 30W for 802.3at.Lifetime manufacturer limited warranty.NETGEAR GS116PP is the industry’s first flexible PoE+ 16-Port Gigabit with a compact and fanless design.
The Grandstream GWN7700MP is a high-performance 5-port 2.5G unmanaged network switch designed for home offices and small-to-medium businesses that demand fast, reliable connectivity. It features five multi-Gigabit RJ45 ports supporting 100/1000/2500Mbps speeds and one SFP+ fiber port offering 1G or 10G uplink capability. With IEEE 802.3af/at-compliant PoE on four ports, it powers IP phones, cameras, and access points directly through Ethernet. The fanless metal enclosure ensures whisper-quiet operation, while auto MDI/MDIX and auto-negotiation simplify setup. Advanced features like QoS, storm control, and energy-efficient Ethernet optimize performance and reduce power consumption. Wall or desktop mountable, the GWN7700MP is a plug-and-play solution for multi-Gigabit networking with smart PoE support..Supports 5 Ethernet ports with multi-gigabit speed and unmanaged switch configuration.Powers up to 4 devices via IEEE 802.3af/at-compliant PoE output.Delivers up to 2.5Gbps per port and 10Gbps via SFP+ uplink.Designed for desktop or wall mounting with compact metal housing.Prioritizes traffic using default strict QoS for smoother performance.Enables auto-negotiation, auto MDI/MDIX, and storm control for secure operation.Handles 45Gbps switching capacity with full-duplex and jumbo frame support.Reduces energy use with IEEE 802.3az energy-efficient Ethernet technology.Meets FCC, CE, RCM, and IC compliance standards for global use
Aruba Instant On 1830 switch series is an affordable, easy to deploy, smart-managed switch series for small businesses looking for a cost-effective ways to keep up with evolving network demands. These are entry-level switches offering Layer 2 switching capabilities, Gigabit connectivity along with flexible management modes — all at an affordable price point..Affordable, easy-to-deploy, smart-managed Gigabit switch for small businesses looking for cost-effective ways to keep up with evolving network demands.This model has 8 x RJ45 10/100/1000 ports.Use the Instant On mobile app, cloud-based web portal, or the local web GU to quickly setup, monitor, and manage the device.Throughput: 11.9Mpps maximum; switching capacity: 16Gbps.Dimensions: 1.54"H x 6.18"W x 6.81"D.Power consumption at 100V-127V: 8.09W maximum, 5.8W idle; at 200V-220V: 8.05W maximum, 5.9W idle.Certifications and standards: Meets or exceeds the UL 62368-1 2nd. and 3rd. Ed, FCC CFR 47 Part 15: 2018 Class A standards.Powered by ARM Cortex-A9 800MHz, 512MB SDRAM, 256MB flash memory, and 1.5MB packet buffer memory.Compact and fanless model for acoustically sensitive environments.Can be powered by an upstream Power over Ethernet (PoE) switch for environments where no line power is available.Lifetime manufacturer limited warranty
This TP-LINK JetStream enterprise switch with 8 x gigabit PoE+ ports and 2 x gigabit SFP slots provides non-blocking switching performance and ultralow latency, so reliable and lightning-fast connections to server and other switches are easily built. Security features include IP-MAC-Port-VID binding, port security, storm control, and DHCP snooping to defend against a range of network threats. An integrated list of common DoS attacks is available, making it easier than ever to prevent them. In addition, the access control lists (ACL, L2 to L4) feature restricts access to sensitive network resources by denying packets based on source and destination MAC address, IP address, TCP/UDP ports, or VLAN ID. Users' network access can be controlled via 802.1x authentication, which works with a RADIUS/Tacacs+ server to grant access only when valid user credentials are provided..8 x gigabit (RJ45) ports of this managed switch offer high-speed and reliable connections to other switches and devices.Contains 8 x 802.3at/af compliant PoE+ ports with a total power supply of 150W.Provides up to 20Gbps of switching capacity.Rack-mountable and features a fanless design.Voice and video traffic can be prioritized based on IP address, MAC address, TCP port number, UDP port number, and more; with QoS (Quality of Service), voice and video services remain smooth, even when bandwidth is in short supply.Cloud access and the Omada app for enhanced convenience and easy management.Maximum power consumption: 23.6W (110V/60Hz).8 x Gigabit PoE+ ports and 2 x Gigabit SFP slots provide high-speed connections.Helps route internal traffic for more efficient use of network resources.Features robust security strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, and more.Stand-alone management: web, CLI (console port, Telnet, SSH), SNMP, RMON, and dual image bring powerful management capabilities.sFlow, QinQ, L2PT PPPoE ID Insertion, and IGMP authentication features are provided, developed with service providers in mind.802.3ah OAM and Device Link Detection Protocol (DLDP) offer easy monitoring and troubleshooting of Ethernet links.IPv6 functions such as dual IPv4/IPv6 stack, MLD snooping, IPv6 ACL, DHCPv6 snooping, IPv6 interface, path maximum transmission unit (PMTU) discovery, and IPv6 neighbor discovery guarantee your network is ready for the next-generation network (NGN) without upgrading your hardware.Lifetime manufacturer limited warranty
The Aruba CX 6000 Switch series is modern family of entry level access switches perfect for branch offices, midsize businesses, and small enterprises. Optimized for reliable, simple and secure access, the CX 6000 series provides a convenient and cost-effective wired access solution for networks supporting IoT, mobile, and cloud applications. The CX 6000 series is based on the Aruba ASIC architecture with the programmable AOS-CX operating system used across the entire Aruba CX portfolio for a more consistent, more efficient operator experience. This fully managed series has convenient built-in uplinks with up to 370W of PoE+ to support IoT devices such as security cameras and wireless APs. A compact and fanless model is perfect for use in quiet, small work spaces. The CX 6000 series is easy to deploy and use with flexible management choices that include Web GUI, CLI, cloudbased and on-premise Aruba Central management, so you can choose the best fit for your business and network environment. Delivering Layer 2 capabilities with enhanced access security, traffic prioritization, and IPv6 support, the CX 6000 also simplifies ownership and brings peace of mind with no switch software licensing.Optimized for reliable, simple and secure access, this managed switch provides a convenient and cost-effective wired access solution for networks supporting IoT, mobile, and cloud applications.Contains 24 10/100/1000BASE-T ports and four 1Gb SFP ports; supports PoE standards: IEEE 802.3af, 802.3at.Based on AOSCX, a modern database-driven operating system that is built on a modular Linux architecture; secure management access delivers secure encryption of all access methods.Up to 104Gbps in non-blocking bandwidth and up to 77.3Mbps for forwarding.Dimensions: 1.73"H x 17.4"W x 12"D.Power consumption (230 VAC): idle: 22.9W; max. power (w/o PoE): 32.7W; max. power (w/ PoE): 455W.Certifications and standards: Meets or exceeds UL, EN, CSA, VCCI, IEC standards.Mounts in an EIA-standard 19" telco rack or equipment cabinet (rack-mounting kit available); horizontal surface mounting; wall mounting.Enterprise-class Layer 2 connectivity with support for ACLs, robust QoS and static routing.Convenient built-in 1GbE uplinks and up to 370W of Class 4 PoE for support of IoT devices.Management flexibility with support for Aruba Central, easy-to-use Web GUI, CLI, and Aruba NetEdit.Simple deployment with Zero Touch Provisioning.Simplifies adding, moving, and changing with colorless ports.Selectable queue configurations that allow for increased performance by defining a number of queues and associated memory buffering to best meet the requirements of network applications.Auto-MDIX provides automatic adjustments for straight-through or crossover cables on all 10/100/1000 ports.Unsupported transceiver mode (UTM) allows inserting and enabling all unsupported 1Gb transceivers and cables.VLAN support and tagging support for IEEE 802.1Q (4094 VLAN IDs) and 512 VLANs simultaneously.Jumbo packet support improves the performance of large data transfers; supports frame size of up to 9198 bytes.Lifetime manufacturer limited warranty
Now you can put together a powerful, high-speed network on a small scale. NETGEAR's GS116 Copper Gigabit Ethernet Switch lets you build a system that can move even very large files across your network instantly -- up to 2000Mbps on each port. The standards-based GS116 helps to protect customers' existing and future network infrastructure investments by painlessly integrating other 10, 100, 1000 devices as well as honoring layer 2 802.1p priority tags. Packed with ease-of-use features, this adaptable switch supports either PC or Macintosh operating systems. The compact size makes it ideal for home, small office, workgroups, departments and conference room environments. Its durable metal case has no fan for silent operation.; Features; High-speed, auto-switching 10/100/1000Mbps Ethernet connection; Silently delivers up to 2000Mbps on each port; Integrates 10, 100, & 1000Mbps devices within a network; Honors Layer 2 802.1p traffic priority tags; Space-saving desktop dimensions; Package Contents;16-port Gigabit Switch GS116;Wall-mount kit; AC adapter; Installation guide; Warranty/Support information card.16 high-speed, auto-sensing 10/100/1000 Mbps Ethernet connections.Integrates 10, 100 and 1000 Mbps devices within a network.Silently delivers up to 2000 Mbps on each port.Certifications and standards: CE Class A, FCC Part 15 Class A, EN 55022 (CISPR 22), EN 55024, VCCI Class A, C-Tick Class A.Lifetime limited warranty; 2-year warranty on power adapter.Plug-and-play Switches for Businesses in Need of Instant Connectivity.