Fiber Ethernet Switches
8 results
EX2300 and EX2300-C Ethernet Switches deliver a compact, high-density, cost-effective solution for small network environments where space and power are at a premium. Featuring a small, 1U footprint, the EX2300 and EX2300-C are ideal for access-layer deployments in micro branches, retail and workgroup environments, and converged network access in larger networks. The EX2300 offers 24 10/100/1000BASE-T ports in a single platform, while the EX2300-C offers 12 10/100/1000BASE-T ports. Both models are available with or without IEEE 802.3af Power over Ethernet (PoE) or 802.3at PoE+ for powering attached network devices. Optional front panel 10GbE uplink ports support connections to higher-layer devices. Both models support Juniper's unique Virtual Chassis technology, enabling up to four of the switches to be interconnected and managed as a single device. Both models can also act as satellite devices in a Juniper Junos Fusion Enterprise deployment, which combines large numbers of access switches into a logical management platform..Features 12 networking ports to easily establish a local network or expand your existing one.Cascade to other network devices through the uplink port to expand your local area network.Supports optical fiber cable to span longer distances and provided high data transmission rates between servers and network components.Optimize the performance of business networks with 10 Gigabit Ethernet connectivity.Supports layer 3 switching for enhanced performance and usability.Managed switch provides a reliable foundation for your network
This Brainboxes Industrial SFP Gigabit Ethernet Switch is a fast, low cost, future-proof way to deploy long network segments. Connect to wide variety of fibre optic and copper cable types. It provides high speed data connection over extended distances. Support techologies to reduce susceptibility to electromagnetic interference.Unmanaged switch with 4 x gigabit Ethernet, and 1G SFP ports.Integral DIN mount and slim design takes up minimal cabinet space.Power Consumption: 3.6W Max: 720mA@+5VDC/120mA@+30VDC.Meets or exceeds UL62368-1, CSA C2.22, RoHS standards.Industrial temperature range: -40ºF to +176ºF - works in extreme conditions.Jumbo Frame support up to 9K frames.SFP Port Power Overcurrent protection.Lifetime limited warranty
TRENDnet's Industrial Gigabit L2+ Managed DIN-Rail Switch series offers advanced layer 2 managed features with enhanced traffic controls to meet the evolving demands of today's SMB networks. Each industrial layer 2 managed switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° - 75° C (-40° - 167° F) for industrial environments. Our industrial layer 2 managed switch models feature copper Gigabit ports for high-speed device connections, and SFP slots that support 1000Base-FX modules for long distance fiber networking applications. These industrial layer 2 managed DIN-Rail switches provide an intuitive web-based management interface. Each TRENDnet industrial layer 2 managed switch supports advanced traffic management controls, troubleshooting, and SNMP monitoring. Advanced managed switch features include LACP to group ports together to increase bandwidth between switches, VLANs for segmenting and isolating virtual LAN groups, QoS for traffic prioritization, port bandwidth controls, and SNMP monitoring making each TRENDnet industrial layer 2 managed switch a powerful solution for SMB networks. This industrial 802.3bt PoE++ switch has four gigabit PoE++ ports with a 360W PoE power budget, plus two SFP slots for long distance fiber applications. Advanced PoE technology supported includes Perpetual PoE, Fast PoE, and PoE Alive Check..This switch includes 4 Gigabit Ethernet ports and 2 Gigabit SFP slots, offering a 12Gbps switching capacity. It is a Layer 3 managed switch, ideal for industrial and SMB network environments requiring advanced traffic control and reliability.Supports IEEE 802.3bt PoE++ with a 360W total PoE power budget, delivering up to 90W per port. Features include Perpetual PoE, Fast PoE, PoE scheduling, and PD alive check to automatically reboot unresponsive devices.Each port supports Gigabit Ethernet (10/100/1000 Mbps), ensuring high-speed data transmission across all connected devices.Designed for DIN-Rail mounting, the switch features a rugged IP30-rated metal enclosure suitable for harsh industrial environments with high vibration, shock, and extreme temperatures ranging from -40°C to 75°C.This is a wired-only switch and does not support wireless connectivity, focusing on robust, high-speed wired networking.Supports SNMP v1, v2c, and v3, enabling remote monitoring and management of network performance and device health.Includes IEEE 802.1p QoS with queue scheduling (SPQ/WRR) and DSCP support, allowing prioritization of critical traffic for smoother network performance.Offers a comprehensive management suite including Web GUI, CLI (Telnet/SSH), VLAN (802.1Q/Q-in-Q), IGMP Snooping, MLD, MVR, and MAC address filtering.Also supports Ethernet Ring Protection Switching (ERPSv2) for redundancy and alarm output for power failure alerts.Delivers non-blocking throughput with store-and-forward switching, and supports link aggregation (LACP), STP/RSTP, and bandwidth control per port for optimized traffic handling.Operates with dual redundant power inputs, includes overload current protection, and supports energy-efficient PoE scheduling to reduce power usage during off-hours
The Aruba 2930M Switch Series is designed for customers creating digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. These Layer 3 access switches are easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager and Aruba AirWave. With support from cloud-based Aruba Central, you can quickly set up remote offices with little or no IT support. A powerful Aruba ProVision ASIC delivers performance and value with support of the latest SDN apps with future proof programmability for tomorrow's applications. High performance modular stacking for up to 10 switches provides pay as you grow scalability and simplicity. The 2930M supports 10GbE and 40GbE uplinks, Dual Modular Power Supplies, up to 1440 Watts of PoE+, models with 24 ports of HPE Smart Rate multi-gigabit Ethernet, robust QoS, RIP, Access OSPF routing, Tunnel Node, PIM, VRRP and IPv6 with no software licensing required. The Aruba 2930M Switch Series provides a convenient and cost-effective access switch solution that can be quickly set up with Zero Touch Deployment. The switches include a Limited Lifetime Warranty. FEATURES AND BENEFITS: Software-defined networking: OpenFlow supports OpenFlow 1.3 specifications to enable SDN by allowing separation of the data (packet forwarding) and control (routing decision) paths. Unified Wired and Wireless ?: ClearPass Policy Manager supports unified wired and wireless policies using Aruba ClearPass Policy Manager. Switch auto-configuration automatically configures switch for different settings such as VLAN, CoS, PoE max power, and PoE priority when an Aruba access point is detected. User role defines a set of switch-based policies in areas such as security, authentication, and QoS. A user role can be assigned to a group of users or devices, using switchbased local user role or download from ClearPass. Tunnel Node provides a secure tunnel that transports network traffic on a per-port or per-user role basis to an Aruba Controller. In a per-user role Tunnel Node, users are authenticated by the ClearPass Policy Manager which directs traffic to be tunneled to an Aruba controller or switch locally. HTTP redirect function supports HPE Intelligent Management Center (IMC) bring your own device (BYOD) solution. Quality of Service (QoS): Traffic prioritization (IEEE 802.1p) allows real-time traffic classification into eight priority levels mapped to eight queues. Layer 4 prioritization enables prioritization based on TCP/UDP port numbers. Class of Service (CoS) sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ. Rate limiting sets per-port ingress enforced maximums and per-port, per-queue minimums ?. Large buffers Provide graceful congestion management..Features 48 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.Supports optical fiber cable to span longer distances and provided high data transmission rates between servers and network components.Gigabit Ethernet port for ultra-fast network speeds.Supports layer 3 switching for enhanced performance and usability.Management capability provides control over setup and configuration of your network.Built-in power supply to ensure all components are being supplied with accurate voltage.Rack mounting enables you to organize wires & secure cables for professional installation
Ubiquiti UniFi configurable Gigabit Layer 2 switch with 48 Gigabit Ethernet ports and four SFP ports, providing 1 Gigabit links to your devices and fiber uplink options to your enterprise network. It features a 1.3" touch LCM, a nd a fanless design. The LCM provides current switch states and the necessary information you need for quick diagnosis. Managed and configured by the UniFi Network Controller a nd mobile app, the UniFi switch offers an extensive suite of advanced Layer 2 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere..Configurable Gigabit Layer 2 switch with 48 Gigabit Ethernet ports and four SFP ports, providing 1Gbps links to your devices and fiber uplink options to your enterprise network.48 gigabit ports provide a 52Gbps switching capacity.Rack-mountable for convenient use.Works with the UniFi Network Application.Meets or exceeds CE, FCC, IC standards.Features a 1.3" LCM color touch screen with AR switch management
Build and expand your network with the Ubiquiti UniFi Pro Aggregation switch. The UniFi switch is a configurable 10G Layer-3 switch. It offers 28 10G SFP+ fiber links to your devices and 4 25G SFP28 fiber uplink options to your enterprise network. Features a 1.3" touch LCM. The LCM provides current switch states and the necessary information you need for quick diagnosis. Managed and configured by the UniFi Controller with UniFi Mobile app support, the UniFi Switch offers an extensive suite of advanced Layer-3 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port, Inter-VLAN routing, static routing, and DHCP server. The UniFi Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere..Rack mountable configurable 10G fiber Layer-3 switch.Offers 28 10G SFP+ fiber links to your devices and four 25G SFP28 fiber uplink options to your enterprise network.Managed and configured by the UniFi Controller with UniFi Mobile app support.Offers 380Gbps of total non-blocking throughput, 760Gbps switching capacity, and 565.44Mpps forwarding rate.Dimensions: 1.7"H x 17.4"W x 12.8"D.Max power consumption: 100W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.Features 1.3" touch screen with AR switch management.Provides an extensive suite of advanced Layer-3 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port, Inter-VLAN routing, static routing, and DHCP server.Made of SGCC steel and comes in silver.2-year manufacturer limited warranty
Expand your network capacity with the help of 8 networking ports and transfer your data quickly and easily.Supports optical fiber cable to span longer distances and provided high data transmission rates between servers and network components.Up to 10x faster than standard Ethernet server connectivity while providing high-performance uplinks.Managed switch provides a reliable foundation for your network
AXIS T8504-E Outdoor PoE Switch gives you a quick, easy way to deploy outdoor cameras over long distances and keep your installation costs low. With an integrated SFP port, it's perfect for fiber-based installation. It's also a robust, low-upkeep solution - but if and when maintenance work is needed, remote management makes taking care of it a simple matter..SFP port - for fiber installation.Power over Ethernet (PoE).Up to 60 W per port (total 150 W).IP67 rating
You May Also Like
Cisco Catalyst 9300 switches are stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. Cisco Catalyst 9300 switches form the foundational building block for Software-Defined Access (SD-Access). They are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. TCisco Catalyst 9300 is the first optimized platform for high-density Wi-Fi 6 and 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch..Stackable enterprise switching platform built for security, IoT, mobility, and cloud.Features 48-port 1G copper with fixed 4x10G SFP+ uplinks, PoE+ Network Advantage.Uses Encrypted Traffic Analytics (ETA), AES-256 MACsec encryption, IPSec encryption, Trust Anchor Technologies, and Umbrella DNS Integration.Dimensions: 1.73"H x 17.5"W x 17.7"D.Maximum power consumption: 715W; switching capacity: 176Gbps.Certifications and standards: Meets or exceeds UL 60950-1, CAN/CSA-C222.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950.1, IEEE 802.3 standards.Accelerate changes with programmability, supporting open standards and APIs.Detect and stop threats, even with encrypted traffic.Simplified automation and assurance: goal-based policies are created once centrally, applied network-wide.Features x86 CPU complex with 8GB memory, and 16GB of flash and external USB 3.0 SSD pluggable storage slot (delivering up to 240GB of storage with an optional SSD drive) to host containers.High wireless scale for Wi-Fi 6 and 802.11ac Wave 2 access points supported on a single switch with select models.Lifetime manufacturer limited warranty
The Cisco Catalyst 9300 Series switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At up to 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density Wi-Fi 6 and 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise technology, providing flexible deployment with support for nonstop forwarding with Stateful Switchover (NSF/SSO), for the most resilient architecture in a stackable (sub-50-ms) solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Power over Ethernet Plus (PoE+), 60W Cisco Universal Power over Ethernet (Cisco UPOE) and 90W Cisco UPOE+ ports..Rack mountable switch is stackable enterprise switching platform built for security, IoT, mobility, and cloud.Contains 48 fixed uplink PoE+ and four 10Gb uplink ports.Cisco IOS XE, a modern operating system for the enterprise with support for model-driven programmability including NETCONF, RESTCONF, YANG, on-box Python scripting, streaming telemetry.Dimensions: 1.73"H x 17.5"W x 16.1"D.Meets or exceeds IEC 60950-1, UL 60950-1, CAN/CSA C22.2, No. 60950-1, EN 60950-1, AS/NZS 60950.1, Class I Equipment standards.High wireless scale for Wi-Fi 6 and 802.11ac Wave 2 access points supported on a single switch with select models.Cisco UADP 2.0 Application-Specific Integrated Circuit (ASIC) with programmable pipeline and microengine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.USB 2.0 slot to load system images and set configurations.Up to 480Gbps of local stackable switching bandwidth.Deeper buffer and higher-scale model options for rich multimedia content delivery applications.Leading PoE capabilities with up to 384 ports of PoE per stack, PoE+, and high density IEEE 802.3bt - 60W UPOE, and 90W Cisco UPOE+.Intelligent Power Management with Cisco StackPower technology, providing power stacking among members for power redundancy.Line-rate, hardware-based Flexible NetFlow (FNF), delivering flow collection of up to 64000 flows.Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-to-IPv6 migration.Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy making it suitable for distribution and synchronization of time and frequency over network.Plug and Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.Lifetime manufacturer limited warranty
Cisco Catalyst 9300 Series switches are Cisco's lead stackable enterprise access switching platform and as part of the Catalyst 9000 family, are build to transform your network to handle a hybrid world where the workplace is anywhere, endpoints could be anything, and applications are hosted all over the place. The Catalyst 9300 Series, including the new Catalyst 9300X models, continues to shape the future with continued innovation that helps you reimagine connections, reinforce security and redefine the experience for your hybrid workforce big and small..Managed 24-port Gigabit Ethernet switch offers simplicity without compromise: secure, always on, and IT simplified.Equipped with 24 x 10/100/1000 PoE+ ports and four 10 Gigabit/1 Gigabit SFP+.Switching capacity: up to 128Gbps or up to 448Gbps with stacking.Made in rack-mountable form factor.Facilitates remote management with SNMPv1/v2c/v3 management station that discovers and monitors the switch.Quality of service (QoS) and flow control for improved network efficiency.Dimensions: 1.73"H x 17.52"W x 19.21"D
The Cisco Catalyst 9300 Series switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At up to 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density Wi-Fi 6 and 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise technology, providing flexible deployment with support for nonstop forwarding with Stateful Switchover (NSF/SSO), for the most resilient architecture in a stackable (sub-50-ms) solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Power over Ethernet Plus (PoE+), 60W Cisco Universal Power over Ethernet (Cisco UPOE) and 90W Cisco UPOE+ ports..Rack mountable switch is stackable enterprise switching platform built for security, IoT, mobility, and cloud.Contains 48 fixed uplink PoE+ and four 1Gb uplink ports.Cisco IOS XE, a modern operating system for the enterprise with support for model-driven programmability including NETCONF, RESTCONF, YANG, on-box Python scripting, streaming telemetry.Dimensions: 1.73"H x 17.5"W x 16.1"D.Meets or exceeds IEC 60950-1, UL 60950-1, CAN/CSA C22.2, No. 60950-1, EN 60950-1, AS/NZS 60950.1, Class I Equipment standards.High wireless scale for Wi-Fi 6 and 802.11ac Wave 2 access points supported on a single switch with select models.Cisco UADP 2.0 Application-Specific Integrated Circuit (ASIC) with programmable pipeline and microengine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.USB 2.0 slot to load system images and set configurations.Up to 424Gbps of local stackable switching bandwidth.Deeper buffer and higher-scale model options for rich multimedia content delivery applications.Leading PoE capabilities with up to 384 ports of PoE per stack, PoE+, and high density IEEE 802.3bt - 60W UPOE, and 90W Cisco UPOE+.Intelligent Power Management with Cisco StackPower technology, providing power stacking among members for power redundancy.Line-rate, hardware-based Flexible NetFlow (FNF), delivering flow collection of up to 64000 flows.Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-to-IPv6 migration.Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy making it suitable for distribution and synchronization of time and frequency over network.Plug and Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.Lifetime manufacturer limited warranty
Cisco Catalyst 9300 Series switches are Cisco's lead stackable enterprise access switching platform and as part of the Catalyst 9000 family, are build to transform your network to handle a hybrid world where the workplace is anywhere, endpoints could be anything, and applications are hosted all over the place. The Catalyst 9300 Series, including the new Catalyst 9300X models, continues to shape the future with continued innovation that helps you reimagine connections, reinforce security and redefine the experience for your hybrid workforce big and small..Stackable managed Gigabit Ethernet switch.Equipped with 24 x Gigabit Ethernet ports with full PoE+ support and 4 x Gigabit fixed uplinks.Forwarding rate: 41.66Mbps, switching capacity: 56Gbps.Dimensions: 1.73"H x 17.5"W x17.7"D.505W available PoE power with single primary power supply.Based on the Cisco UADP 2.0 Application-Specific Integrated Circuit (ASIC) with programmable pipeline and microengine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.Features x86 CPU complex with 8GB memory, and 16GB of flash and external USB 3.0 SSD pluggable storage slot (delivering up to 240GB of storage with an optional SSD drive) to host containers.USB 2.0 slot to load system images and set configurations.Intelligent Power Management with Cisco StackPower technology, providing power stacking among members for power redundancy.IPv6 support in hardware, providing wire-rate forwarding for IPv6 networks.Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-to-IPv6 migration.Cisco IOS XE, a modern operating system for the enterprise with support for model-driven programmability including NETCONF, RESTCONF, YANG, on-box Python scripting, streaming telemetry, container-based application hosting, and patching for critical bug fixes.Plug-and-Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts, or updates to an existing network.Advanced security: Encrypted Traffic Analytics (ETA), support for AES-256 with the powerful MACsec 256-bit encryption algorithm, hardware anchored Secure Boot and Secure Unique Device Identification (SUDI) support for Plug and Play, to verify the identity of the hardware and software.Perpetual licensing package includes the Network Essentials licensing option that is tied to the hardware.Lifetime manufacturer limited warranty
SS2GR4000 Series is a L2 Gigabits intelligent switch designed for carrier and MAN networks. It supports comprehensive QoS, enhanced VLAN functions (VLAN VPN, Voice VLAN, QinQ, N:1 VLAN Translation), Ethernet Ring Protection Protocol (G.8032), classified bandwidth control, intelligent security control, OAM(Operations, Administration and Maintenance), manageability functions and Triple-Play services which fulfill the network requirements demanded by carrier network, MAN access. SS2GR4000 Series switch offers green features like IEEE 802.3az (Energy Efficient Ethernet), Fan-less design, which can dramatically lower power consumption, achieve green energy and save the cost for the carrier and MAN users..Features 24 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network
Cisco Catalyst 9200 series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 series switches give you what you need now with investment protection on future innovations..Rack mountable switch is the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.Contains 48 PoE+ 4x1G uplink ports.Supports Cisco IOS XE software that opens a completely new paradigm in network configuration, operation, and monitoring through network automation.Operational efficiency, supporting stacking bandwidth up to 80Gbps.Dimensions: 1.73"H x 17.5"W x 11.3"D.Provides optimum power saving with Energy-Efficient Ethernet (EEE) on the RJ45 ports and low-power operations for the perfect power management and power consumption capabilities.Features 2GB DRAM, 4GB flash memory.Resiliency with field-replaceable units (FRU) and redundant power supply, fans, and modular uplinks.Provides infrastructure investment protection by allowing a nondisruptive migration from 1G to 10G and beyond.Offers Gigabit Ethernet speeds with intelligent services that keep traffic flowing smoothly, even at 10 times the normal network speed; industry-leading mechanisms for cross-stack marking, classification, and scheduling deliver superior performance for data, voice, and video traffic at wire speed.IP unicast routing protocols (including static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng, and Open Shortest Path First [OSPF], Routed Access) are supported for small network routing applications with the Network Essentials stack; equal-cost routing facilitates Layer 3 load balancing and redundancy across the stack.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Advanced network monitoring using full Flexible NetFlow.Plug-and-Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.Meets or exceeds IEC 60950-1, UL 60950-1, CAN/CSA C22.2 No. 60950-1, EN 60950-1, AS/NZS 60950.1, Class I equipment standards.Lifetime manufacturer limited warranty
This switch is a next generation rack mount hardened switch with 136Gbps switching capacity. It provides (24) 10/100/1000 PoE+ ports, (4) 100/1000 dual speeds SFP ports, It has additional (4) 1G/10G SFP+ slots..IPv4/IPv6 dual protocols.Supports Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing
The SISPM1040-582-LRT is a full managed PoE++ switch suitable for connecting and powering devices in hardened environment. It has (8) 10/100/1000 PoE++ ports with (2) 100/1000 dual speed SFP slots. The switch can supply up to 90 Watts per port on four ports or 60 Watts per port on eight ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments..IPv4/IPv6 dual protocols.Supports Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing
Axis Communications industrial PoE switch is a four-port managed industrial PoE Gigabit switch. In addition, the switch is equipped with two RJ45 and two SFP data ports that allows for extra devices to be connected. The ruggedized industrial switch is developed for challenging environments, when mounted inside a surveillance cabinet. Perfect for high demanding installations such as alongside highways and tunnels..Four-port managed industrial PoE gigabit switch is perfect for high-demanding installations, such as alongside highways and tunnels.Full-power PoE switch with a 240W PoE power budget.Four gigabit ports provide a 16Gbps switching capacity to support edge network installations.Comes with an individual password, an easy-to-use setup wizard, and a comprehensive set of configuration tools, such as an integrated DHCP server for automatic assignment of IP addresses.5-year manufacturer limited warranty
Fast, low-cost, future-proof way to deploy long network segments. Connect to a wide variety of fibre optic and copper cable types for high-speed data connection over extended distances. Galvanically Isolated Ethernet Ports. Automatic detection of data transmission speed: 10/100/1000 Mbps. Wide temperature range of -14ºF to +140ºF and dual input redundant power supply with wide voltage range means it can be powered from USB or on the 24V factory floor. Power terminal is removable with numbered pins for easy wiring. Power consumption is optimised based on the status of the link device. No software required. Ideal for factory floor, in vehicle and marine applications..Unmanaged switch with 4 x gigabit Ethernet, and 1G SFP ports.Integral wall mount or optional DIN rail mount.Power Consumption: 3.6W Max: 720mA@+5VDC/120mA@+30VDC.Meets or exceeds UL62368-1, CSA C2.22, RoHS standards.Industrial temperature range: -14ºF to +140ºF - works in extreme conditions.Jumbo Frame support up to 9K frames.SFP Port Power Overcurrent protection.Lifetime limited warranty
Built for Security, IoT, Mobility, and Cloud The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: ? Simplified device deployment ? Unified management of wired and wireless networks ? Network virtualization and segmentation ? Group-based policies ? Context-based analytics.Features 24 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing
Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access..Rack mountable switch is the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.Contains 48 PoE+ and four 10Gb uplink ports.Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Dimensions: 1.73"H x 17.5"W x 11.3"D.Meets or exceeds IEC 60950-1, UL 60950-1, CAN/CSA C22.2, No. 60950-1, EN 60950-1, AS/NZS 60950.1, Class I Equipment standards.Resiliency with Field-Replaceable Units (FRU) and redundant power supply, fans, and modular uplinks.Flexible downlink options with data, PoE+, or mGig.Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 80Gbps.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Advanced network monitoring using full Flexible NetFlow.Plug and Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.Lifetime manufacturer limited warranty
SS2GR4000 Series is a L2 Gigabits intelligent switch designed for carrier and MAN networks. It supports comprehensive QoS, enhanced VLAN functions (VLAN VPN, Voice VLAN, QinQ, N:1 VLAN Translation), Ethernet Ring Protection Protocol (G.8032), classified bandwidth control, intelligent security control, OAM(Operations, Administration and Maintenance), manageability functions and Triple-Play services which fulfill the network requirements demanded by carrier network, MAN access. SS2GR4000 Series switch offers green features like IEEE 802.3az (Energy Efficient Ethernet), Fan-less design, which can dramatically lower power consumption, achieve green energy and save the cost for the carrier and MAN users..Features 48 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network
d2d02946b158a8f055cb81e5358d3e7d.Built-in power supply to ensure all components are being supplied with accurate voltage.Supports layer 3 switching for enhanced performance and usability.Rack mounting enables you to organize wires & secure cables for professional installation.Managed switch provides a reliable foundation for your network.Optimize the performance of business networks with 10 Gigabit Ethernet connectivity.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Features 48 networking ports for connecting multiple peripherals, creating multiplayer gaming environments and establishing a connection to transfer large files instantly
The Transition Networks® SISPM1040-384-LRT-C gigabit Ethernet managed switch is suitable for powering and connecting devices in hardened environments. This switch with 8 POE ports and 4 SFP ports, supports jumbo frames up to 9.6K bytes and supports G.8031 Ethernet linear protection switching. This black switch simultaneously supplies power to all the 8-ports, up to 30 W for each port. The hardened switch is perfect for factory floors, outdoor enclosures or other challenging environments. It includes embedded Device Management System (DMS) software, which provides advanced tools required for management of all IP addressable devices..Gigabit Ethernet managed switch is suitable for connecting and powering devices in hardened environments.8 x 10/100/1000Base-T PoE+, 4 x 100/1000Base-X SFP ports, RJ-45 serial console.Management: VLAN, Private VLAN Edge, Voice VLAN, GVRP, Web, SNMP v1,v2c,v3, Telnet, CLI, DMS, security: HTTPS/SSH v1/v2, IP source guard.Backplane: 24 Gbps.Dimensions: 5.4"H x 2.4"W x 5.3"D.Power consumption: 11 W (Max) without PoE.Meets EMI, CE, FCC Part 15, EN61000-4-2, EN61000-4-3, EN-61000-4-4, EN61000-4-6, IEC60068-2-32, EN50155, EN50121-4, NEMA TS-2, IEEE1613 standards.Power supply: 24 VDC, 1 A digital output, 48 to 57 VDC input.VLANs: 4000.Protocols: Supports LLDP, TCP/UDP source, DSCP/IP precedence.Indicators: Status LEDs - system, power 1, ring master, coupling, power 2, alarm, port status.Mac address: 8K, jumbo frames: 9.6KB.Layer supported: 2, color: Black.Temperature rating: -40 to 75 deg C operating, -40 to 85 deg C (storage), humidity: 5 to 95% (non-condensing).Weight: 2.2 lbs..Comes with 5 year warranty.Black 8-port gigabit Ethernet managed switch supports Jumbo frames up to 9.6 KB, LLDP protocol, port mirroring and port based network access control.