HDD Brackets

StarTech 2.5in SATA Hard Drive to 3.5in Drive Bay Mounting Kit.Hard drive accessory type: SATA.Drive connectors: 1 x SATA data and power combo (7 + 15 pin) receptacle.Host connectors: 1 x LP4 (4 pin - Molex large drive power) male, 1 x SATA (7 pin - data) receptacle.2 1/2" SATA hard drive in a 3 1/2" drive bay.A metal mounting bracket ensures the drive is reliably secure and provides heat dissipation from the drive.Features a sturdy aluminum bracket as well as a combined SATA cable which helps simplify installation and reduce clutter within the computer case.Device supported: Hard disk drive.Compatibility: PC.Green compliance certificate/authority: RoHS.Material: Aluminum.Package contents: 3 1/2" mounting bracket, data/power adapter cable, screw kit.2 years warranty.Bay provided: 1 x 2 1/2" internal, bay required: 1 x 3 1/2" internal.StarTech.com Drive Bay Mounting Kit - Secure Your Internal Hard Drive

StarTech 2.5" to 3.5" SATA Hard Drive Adapter Enclosure.Hard drive accessory type: SATA hard drive adapter enclosure.Dimensions: 1.4"(H) x 4"(W) x 5.7"(L).Interfaces: Drive connector: SATA/600.Support for SATA revision I/II/III (1.5/3/6 Gbps), tool less installation, supports 2.5" SSD/HDD up to 12.5 mm in height, standard 3.5" HDD mounting points, material: Aluminum, plastic.Drive connectors: 1 x SATA data and power combo (7+15-pin), host connectors: 1 x SATA data and power combo (7+15-pin).Data transfer rate: 6 Gbps SATA III.Max drive capacity: Currently tested with up to 1TB 7200 RPM hard drives.Operating temperature: 5 - 55 deg C, humidity: 5 - 85%RH.Drive size: 2 1/2", drive installation: Removable.Supports 2 1/2" SSD/HDD up to 12.5 mm in height, SATA revision I/II/III (1.5/3.0/6.0 Gbps).Improve the performance speed of any 3 1/2" hard drive application by adapting a 2 1/2" solid state drive.Tool less installation.I/O expansions: Number of total expansion bays: 1, number of 2 1/2" bays: 1.Includes 1 x 2 1/2" to 3 1/2" SATA HDD/SSD enclosure, 1 x screw kit, 1 x install guide.Weight: 9.2 oz..Warranty: 2 years limited.Startech.com® 2 1/2" to 3 1/2" SATA hard drive adapter enclosure has internal form factor and includes serial ATA/600 drive interface.

The 2U 14" deep wall mounting bracket for patch panels delivers a sturdy and dependable equipment storage option, allowing you to wall mount data/IT equipment for a more efficient and accessible operating environment. It's the perfect solution for areas where space is at a premium like SoHo (small office, home office) environment, or space limited server room because it doesn't take any floor space. The mounting bracket features an all-steel design and is suitable for mounting patch panels, or other slim 19in equipment to a wall, and to organize cabling or equipment in your network closet, wiring closet, back office, or IDF. The sturdy steel construction is especially helpful for durability and stability. Also, because The open frame wall rack's mounting holes are positioned 16in. apart, allowing you a simple and secure wall-stud anchoring to your existing construction framework. M6 square cage nuts and M6 screws are included with the wall-mount bracket, additionally, M5x25 mounting screws are included to save you the hassle of sourcing separate mounting hardware. The RACK-2U-14-BRACKET is backed by a StarTech.com lifetime warranty and free lifetime technical support..2U WALL MOUNT RACK: This 19-inch wide low profile wall mounted rack has a maximum mounting depth of 14 in (35 cm), recommended for networking equipment up to 12 in deep, leaving 2 in for cable routing; Maximum weight capacity of 77 lbs. (35 kg).EASY TO INSTALL: The 2U wall-mounting patch panel bracket ships fully assembled and comes complete with M6 screws and M6 square cage nuts for easier equipment installation & includes wall mounting hardware; Predrilled wall mounting holes spaced 16" apart.COLD-ROLLED STEEL CONSTRUCTION: The wall mounting rack features a 1/16 in (1.5 mm) thick solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution.EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable opening slot for in-wall cable routing in your network closet, server room, wiring closet, classroom.Durable wall mount rack made of cold rolled steel.STARTECH.COM ADVANTAGE: IT professionals choice for over 30 years; This 2U wall mount rack backed for life by StarTech.com, including free 24/5 North America based multi-lingual tech support.Mount equipment that is up to 14 inches deep, such as patch panels or network switches, to your wall

Use this SATA hard drive docking station to gain quick access to two of your 2.5" or 3.5" SATA III SSDs/HDDs - Access two 2.5/3.5” SATA hard drives or solid state drives simultaneously and hot swap drives in and out of this HDD docking station - Dual Bay SATA HDD Docking Station features plug-and-play functionality - Gen 1 USB 3.1 hard drive dock with data transfer speeds of up to 5Gbps (AKA USB 3.0) / SATA docking station / SSD docking station / SATA drive dock / USB3 HDD docking station.Access two 2.5/3.5” SATA hard drives (HDD) or solid state drives (SSD) simultaneously and hot swap drives in and out.USB 3.0 with data transfer speeds of up to 5Gbps.Convenient top-loading design with independent drive doors.Plug-and-play functionality.Easy to set up with no driver or software installation required.Use this SATA hard drive docking station to gain quick access to two of your 2.5" or 3.5" SATA III SSDs/HDDs

Here's a fast, easy way to access data on a 2.5" solid-state or hard drive. This cable-style adapter lets you connect your laptop or desktop computer directly to a solid-state drive and access it through ultra-fast USB 3.1 Gen. 2 (up to 10 Gbps). With the adapter cable, you can quickly swap hard drives without having to install your drives into an enclosure. You can copy or retrieve data from a 2.5" SSD/HDD quickly with no additional accessories required. It gives you easy drive access for data migration, drive cloning and data backup applications, with the fast performance of USB 3.1 Gen 2. USB 3.1 Gen 2 gives you greater bandwidth and speed with rates of up to 10 Gbps - twice the speed of USB 3.0 (USB 3.1 Gen 1) technology. It lets you leverage the high performance of the latest SSDs and hard drives, while alleviating bottlenecks in your data transfers. This cable-style adapter features a compact, lightweight design that tucks easily into a laptop bag or carrying case. Use it wherever you go to access valuable data quickly - with no external power required..QUICKLY ACCESS A SATA SSD OR HDD: This USB 3.1 to SATA cable delivers instant access to your 2.5" SATA drives from your laptop or computer; The adapter is compatible with SATA I, II and III (up to 6Gbps) NOTE: Supports 2.5" SATA drives only. For 3.5" drives please see our USB312SAT3.FAST TRANSFER SPEEDS & UASP SUPPORT: The SATA hard drive adapter cable lets users experience enhanced performance and super-fast data transfer speeds with support for USB 3.1 (10Gbps) and UASP.CONNECT FROM ANYWHERE: The external HDD / SSD storage converter delivers perfect portability, tucking away nicely in a laptop bag; The cable-style adapter is USB-powered so no external power cords are required.1 x SATA/Power.PLUG-AND-PLAY: Access any 2.5" hard drive or solid-state drive from any USB enabled computer by simply plugging in the SATA adapter cable; you can easily swap between drives with no need to install the drive inside an enclosure.Black.Connect a 2.5" SATA SSD/HDD to your computer using this USB 3.1 Gen 2 ultra-portable cable

The StarTech® WALLMOUNT8 wall-mounting bracket provides 8U of space for mounting shallow rack-mount equipment that is 12" deep. This accessory in black, is made of solid steel and offers hassle-free installation. It optimizes your working space by efficiently mounting your equipment on your wall instead of taking up desk space or other usable surface areas..Wall mounting bracket provides 8U of space for mounting shallow rack-mount equipment that's 12" deep or less to the wall.Dimensions: 14.3"H x 20.5"W x 13.7"D (product), 14.3"H x 20.5"W x 12"D (external), 13.5"H x 17.7"W (internal).Black steel.Frame type: Open frame.Rack type: 2-post.Maximum weight capacity: 80.2 lbs..Improve efficiency in your office or server room by mounting shallow equipment to the wall.Sturdy installation of mission critical equipment with solid steel design.Hassle-free setup with wall mounting holes spaced 16" apart, matching standard dry-wall framework.Rear access panel for cable management.Includes 1 x wall-mount bracket, 24 x M5 cage nuts, 24 x M5 screws with washers, 1 x M6 K-nut, 6 x wood screws, 1 x instruction manual.RoHS compliant.Weight: 17.8 lbs..Comes with lifetime warranty

StarTech Drive Docking Station.Device Type: HDD docking station - external.Bays: 1.Bus Type: eSATA, USB 3.1 (Gen 2).Color: Black.Expansion Bays: 1 x hot-swap - 2.5" / 3.5" shared.Hard Drive Form Factor Compatibility: 2.5", 3.5".Interface: SATA 6Gb/s

Startech® 1 Rack rackmount bracket is designed for simple installation and maximum server/KVM rack space-efficiency. Bracket includes a cable support bracket that reduces stress on KVM cables and switch connectors..Color: Black.Rack-mount brackets include a cable support bracket that reduces stress on KVM cables and switch connectors.Compatibility: SV431H KVM switch, SV431D KVM switch.Easy to install.Saves space by rackmounting equipment.2 years limited warranty.Startech® 1 Rack rackmount bracket offer a space-saving solution for our SV431/SV431D rack mount KVM switches.

This compact flash IDE adapter is a perfect solution for accessing CompactFlash (CF I, CF II) and IBM micro drive media, allowing you to access the flash/micro drive media as if it were an IDE hard drive..CompactFlash.Includes: Compact flash to IDE adapter, 3 1/2" enclosure, full profile expansion slot bracket, SP4 to LP4 molex power cable, instruction manual.Interface: 1 x 44 pin IDE/EIDE.Media supported: CompactFlash Type I, II, microdrive.Host connectors: 1 - IDE (40 Pin, EIDE/PATA) male, 1 - SP4 (4 pin, small drive power) male.Compatible slots: 1 x expansion slot, Compatible bays: 1 x front accessible - 3 1/2" x 1/3H.Use your compact flash card as a bootable and removable device.Excellent for swapping operating systems quickly without having to take your computer apart.Easily swap cards in and out with built in push button ejector.Easy to use jumpers offer simple master/slave drive setting.Can be mounted in the front or rear panel of your case, to fit into any 3 1/2" bay or available expansion slot.Temperature: - 67 to 185 deg F, Humidity: 5 to 85% RH.Certifications and standards: FCC, RoHS.Weight: 5.1 oz.Warranty: 2 years limited.StarTech Drive Bay Single CompactFlash Card Reader/Writer - Flashcard Accessibility

This slim, pocket-sized drive enclosure is specifically engineered for 7mm drives, giving you the option to turn your thin hard drive or solid state drive into an external storage solution connected through UASP-enabled USB 3.0. With a thin yet durable design, the enclosure fits your 7mm drives perfectly to eliminate any drive movement inside the enclosure, which could be a problem with a looser-fitting enclosure. To help save you time transferring data to and from your 7mm SSD or HDD, this UASP-enabled enclosure supports transfer speeds up to 70% faster than traditional USB 3.0, when used with a UASP-enabled host computer. Plus, the enclosure is USB-powered, so you don’t have to carry a power adapter with you, giving you one less thing to pack when you’re travelling. To ensure compatibility with your computer system, the S2510BPU337 supports all of the leading operating systems, including: Microsoft Windows® (8/7/Vista/XP/Server 2008/Server 2003), Apple® OSX (10.9/10.8/10.7/10.6), Linux, and Google Chrome OS™..Compatible with 2.5" SATA III SSD and HDD drives up to 2TB.Enclosure connects to your computer via USB 3.0.USB powered, no external power adapter required.Compatibility: Mac, PC.Material: Plastic.Color: Black.Weight: 0.08 lbs..Warranty: 3 Years.Turn a 7mm high 2.5in SATA III SSD/HDD into a UASP-supported USB 3.0 External Drive

This StarTech 6TB USB 3.1 hard drive single-bay dock features a HDD ejection button that permits fast and simple drive removal. The top-loading design provides easy drive access and multi-function LED indicators for user convenience. It access data from one 2.5 or 3.5" SATA SDD/HDD over ultra-fast USB 3.1 Gen 2. It supports USB 3.1 and UASP with file transfer speeds of up to 6 Gbps. An UASP support provides better performance while USB type-A to B cable for easy compatibility..Drive capacity of up to 6TB for reliable data storage.Features serial ATA/600 drive interface for more efficient data transfer.Operates at 100 - 240 VAC, 0.8 A input and delivers 12 VDC, 2 A output.Made of plastic for durability.Drive size: 2.5".Has external form factor.Supports USB 3.1 Gen 2 with file transfer speed of up to 10 Gbps and SATA III with file transfer speed of up to 6 Gbps.Number of 2.5" bays: 2.Max drive height: 0.4".Features SATA data and power combo receptacle for drive connection.Top-loading design with built-in ejection button for easy drive access, UASP support for enhanced performance.Backward compatible with USB 3.0, 2.0 and 1.x.Back up data quickly to an external drive for archiving.Perfect for system builders and IT professionals who need quick access to drives for imaging.Dimensions: 2.5"H x 3.6"W x 5.7"D.Temperature: 5 - 35 deg C operating, -20 - 50 deg C storage, Humidity: 20 - 80% RH.Includes USB 3.1 HDD dock, USB cable, universal power adapter, 4 power adapter plugs, quick install guide.Meets FCC, CE, RoHS certification and standards.Weight: 14 oz..Comes with 2 years warranty.The StarTech 6TB USB 3.1 hard drive single-bay dock in black, is compatible for use with 2.5"/3.5" SATA SSD/HDD drives.

The RKLCDBK Universal VESA LCD Monitor Mounting Bracket for 19in Rack or Cabinet lets you mount almost any retail LCD or Touch screen panel into a server/storage rack/cabinet..Size: 7"(H) x 17" - 19 1/2"(W) x 4.2"(D).Color: Black.Adjustable 100 mm and 75 mm VESA mounting hole pattern for greater compatibility and control.Adjustable depth between 0 to 3.5 inches at an increment of .25 of an inch.Constructed from solid steel at 2.0 mm thick, this bracket is designed for durability.Ideal for installing a retail LCD monitor into an existing Rack or Cabinet solution.Use for uptime/process monitoring with big screens over 19" when mounted outwards.Material: Steel.Installing a touch screen display into a rack or cabinet.Mounting an LCD monitor or TV to the wall.Includes: 1 x LCD mounting bracket (two sides, one back), 1 x pack assembly screws (4 ea truss head, washers, flat head), 8 x LCD mounting Screws.Certifiations and standards: ANSI/EIA RS 310 D standards.Weight: 3.8 lbs..Warranty: Lifetime limited.Universal VESA LCD monitor mounting bracket for 19" rack or cabinet is constructed from solid steel at 2 mm thick and is designed for durability.

This StarTech USB 3.0 Hard Drive Docking Station delivers full, instant access to any 2.5-inch or 3.5-inch SATA (SATA, SATA II, SATA III) hard drive (HDD) or solid state drive (SSD), without having to mount the drive in a computer or install it in an external enclosure. Large capacity drives (tested with up to 4TB 3.5"" and 1TB 2.5"" drives) greatly enhance your computer's storage/backup capabilities..SuperSpeed USB 3.0 compliant host interface, with transfer rates up to 5Gbps. High Speed USB 2.0 compliant host interface, with transfer rates up to 480Mbps.Supports 2.5" and 3.5" form factor SATA hard drives (HDD) and solid state drives (SSD).Dimensions 2.6"(H) x 3.7"(W) x 5.7"(L).1 Expansion bay.Compatible with SATA revision 1/2/3 (1.5/3.0/6.0 Gbps) drives.Compact, desktop-style form factor in a solid black color.Drive connectors: 1 - SATA data and power combo (7+15 pin) receptacle.Host connector: 1 - USB 3.0 B (9 pin; SuperSpeed) female.Compatible with Microsoft Windows, Apple OSX, Linux, and Google Chrome OS.Certifications and standards CE, FCC, RoHs.2-Year Limited Warranty.A top slot-loading design and unique drive ejection mechanism provides quick and easy access to the data without having to install drives into an enclosure or tray.LED indicators 1 - power and activity (solid - power, blinking - activity); Power 12 VDC, 2.5A.Temperature 41 - 176 deg F operating, -40 - 158 deg F Storage; Humidity 8 - 80 percent RH.OS compatibility Windows 2000 XP (32 64-bit) Server 2003 (32 64-bit) Server 2008 R2 Vista (32 64-bit) 7 (32 64-bit) 8 (32 64-bit), Linux 2.6.31 and up.Insertion rating 15000 cycles.Includes USB 3.0 HDD dock, USB 3.0 cable, universal power adapter, 3 x power adapter plug (NA EU UK), instruction manual.Certifications and standards CE, FCC, RoHs.Warranty 2 years limited.StarTech USB 3.0 SATA II Hard Drive Docking Station is capable of transfer speed up 5 Gbps, making it the fastest way to access data from an external drive.

Icy Dock® ToughArmor EX 2.5"/3.5" Internal SATA/SAS HDD/SSD Mobile Rack Drive Bay Adapter; Black (MB492SKLB).Drive fit: Two 2.5" SAS/SATA HDD/SSD.Drive bay fit: 3.5" front device bay (floppy bay).Transfer rate: Up to 6 Gbps.Power input: Single 15-pin SATA power port.Drive cooling: Metal heat dispersion.LED indication: Solid green LED power, flashing amber LED HDD access.Drive security: Two segment key lock + thumbscrew lock.Dimensions: 1"H x 4"W x 5.4"D.Supported drive capacity: 2TB.Features heavy-duty full metal construction and is perfect for enterprise applications.Multi-Flow technology provides effective and excellent passive cooling.Anti-Vibration technology aids to create a safe environment for hard drives or SSDs.Active Power Technology (APT): Individual led only powers up if there is drive installed in the drive bay.Contains user manual, screws, keys and drive ID plug.Weight: 1.77 lbs..Comes with 3 years warranty

StarTech Hard drive converter measures 1" x 3.9" x 5.7" and is designed for 2 1/2" SATA/SAS SSD/HDD to 3 1/2" SATA conversion. Internal converter features Lightweight plastic construction with air vents..Black.Interfaces: SAS, serial ATA.Interface connectors: 1 - SFF - 8482 (29 pin, data and power, internal SAS) receptacle, 1 - SATA data and power combo (7+15 pin) plug.Form factor: Internal.Dimensions: 1"(H) x 3.9"(W) x 5.7"(L).Applications: Install a 2 1/2" hard drive into a 3 1/2" hard drive enclosure or backplane.Lightweight plastic construction with air vents.Supports 2 1/2" form factor hard drives (HDD) and solid state drives (SSD) up to 15 mm in height.Includes: 2 1/2" - 3 1/2" HDD converter.Certifications and standards: RoHS, FCC, CE.Weight: 4.8 oz..Warranty: 2 years limited.StarTech 2.5-to-3.5-Inch Drive Converter - Avoid Buying New Hard Drives

This StarTech.com equipment rack bracket lets you attach your 3U rack mount equipment to a wall so that you don't have to worry about storing it in your server racks. It can hold a total of 125.3 pounds thanks to its two-post construction, and it comes with all the screws you need for easy installation..Dimensions: 5.9inch(H) x 19.8inch(W) x 5.9inch(D).Weight capacity: 125.3 lbs..Arrives fully assembled with cage screws and nuts for mounting equipment into the rack.Equipment can be vertically wall mounted, or horizontally under a desk.Compatible with most 19inch rack mountable equipmen.Rack type: 2 post.U height: 3U.Frame type: Open frame.Front door type: Open.Wall mountable.Industry standards: EIA RS310-C.Compatibility: Network device, power strip, patch panel.Package contents: Vertical wall mount bracket, cage nuts and screws, self tapping wood screws - 3/16inch x 1 1/2inch.Weight: 33.2 oz.Warranty: Lifetime limited.StarTech.com Equipment Rack Bracket - Attach Your 3U Equipment with Ease