High Temperature Silicone Adhesive Tapes

Rust-Oleum LeakSeal Tape Model 275796 creates a chemical a moisture resistant barrier that fixes leaky pipes, hoses and insulates frayed electrical wires. It is easy to remove, leaves no sticky residue and protects from corrosion.Creates a moisture resistant barrier that fixes leaky pipes, hoses and insulates frayed electrical wires.It is easy to remove, leaves no sticky residue and protects from corrosion.Withstands temperatures -85°F to 500°F.Superior strength 700PSI.Insulates up to 8,000 volts.10 foot roll, black.For best results, using tension, stretch tape around the object, overlapping each layer by 1/2" and wrap over itself to fuse. Wrap completely over problem area and cut the tape once finished.LeakSeal Tape is a self-fusing, silicone repair tape that conforms to any surface while providing a water-tight seal

Kapton Tape measuring 3/4" x 36 yds. x 2 mil is made of polymide film with silicone adhesive and maintains high temperature resistance. Tape with excellent abrasion resistance has high dielectric strength and is sold as 1 per pack..Width: 3/4 in.Length: 36 yds.Thickness: 2 mil film, 3.5 mil total.Temperature: -269 - 260 deg C (-452 - 500 deg F).Material: Polymide film, silicone adhesive.Maintains high temperature resistance.Good electrical insulator.Excellent abrasion resistance and high dialectic strength.Silicon adhesive protection leaves no residue.DuPont Kapton polyimide films have high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperature, vibration and other demanding environments.Polyimide films make innovative design solutions possible in a range of industries including, consumer electronics, solar photovoltaic and wind energy, aerospace, automotive and industrial applications.Applications: Automotive sensor and manifolds, etching, fiber optics cable, high temperature powder coating, semiconductor manufacturing, wave soldering during circuit board assembly.Standards and compliance: RoHS.2 mil, 3/4" x 36 yds. kapton tapes are used in applications at temperatures as low as 269 deg C ( 452 deg F) and as high as 260 deg C (500 deg F).

Kapton Tape measuring 1/4" x 36 yds. x 1 mil is made of polymide film with silicone adhesive and maintains high temperature resistance. Tape with excellent abrasion resistance has high dielectric strength and is sold as 1 per pack..Width: 1/4 in.Length: 36 yds.Thickness: 1 mil film, 2.5 mil total.Temperature: -269 - 260 deg C (-452 - 500 deg F).Material: Polymide film, silicone adhesive.Maintains high temperature resistance.Good electrical insulator.Excellent abrasion resistance and high dialectic strength.Silicon adhesive protection leaves no residue.DuPont Kapton polyimide films have high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperature, vibration and other demanding environments.Polyimide films make innovative design solutions possible in a range of industries including, consumer electronics, solar photovoltaic and wind energy, aerospace, automotive and industrial applications.Applications: Automotive sensor and manifolds, insulating circuit boards, etching, fiber optics cable, high temperature powder coating, semiconductor manufacturing, wave soldering during circuit board assembly.Standards and compliance: RoHS.1 mil, 1/4" x 36 yds. kapton tapes are used in applications at temperatures as low as 269 deg C ( 452 deg F) and as high as 260 deg C (500 deg F).

Kapton Tape measuring 1/2" x 36 yds. x 1 mil is made of polymide film with silicone adhesive and maintains high temperature resistance. Tape with excellent abrasion resistance has high dielectric strength and is sold as 1 per pack..Width: 1/2 in.Length: 36 yds.Thickness: 1 mil film, 2.5 mil total.Temperature: -269 - 260 deg C (-452 - 500 deg F).Material: Polymide film, silicone adhesive.Maintains high temperature resistance.Good electrical insulator.Excellent abrasion resistance and high dialectic strength.Silicon adhesive protection leaves no residue.DuPont Kapton polyimide films have high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperature, vibration and other demanding environments.Polyimide films make innovative design solutions possible in a range of industries including, consumer electronics, solar photovoltaic and wind energy, aerospace, automotive and industrial applications.Applications: Automotive sensor and manifolds, insulating circuit boards, etching, fiber optics cable, high temperature powder coating, semiconductor manufacturing, wave soldering during circuit board assembly.Standards and compliance: RoHS.1 mil, 1/2" x 36 yds. kapton tapes are used in applications at temperatures as low as 269 deg C ( 452 deg F) and as high as 260 deg C (500 deg F).

Kapton Tape measuring 1/8" x 36 yds. x 1 mil is made of polymide film with silicone adhesive and maintains high temperature resistance. Tape with excellent abrasion resistance has high dielectric strength and is sold as 1 per pack..Width: 1/8 in.Length: 36 yds.Thickness: 1 mil film, 2.5 mil total.Temperature: -269 - 260 deg C (-452 - 500 deg F).Material: Polymide film, silicone adhesive.Maintains high temperature resistance.Good electrical insulator.Excellent abrasion resistance and high dialectic strength.Silicon adhesive protection leaves no residue.DuPont Kapton polyimide films have high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperature, vibration and other demanding environments.Polyimide films make innovative design solutions possible in a range of industries including, consumer electronics, solar photovoltaic and wind energy, aerospace, automotive and industrial applications.Applications: Automotive sensor and manifolds, insulating circuit boards, etching, fiber optics cable, high temperature powder coating, semiconductor manufacturing, wave soldering during circuit board assembly.Standards and compliance: RoHS.1 mil, 1/8" x 36 yds. kapton tapes are used in applications at temperatures as low as 269 deg C ( 452 deg F) and as high as 260 deg C (500 deg F).

Kapton Tape measuring 1" x 36 yds. x 2 mil is made of polymide film with silicone adhesive and maintains high temperature resistance. Tape with excellent abrasion resistance has high dielectric strength and is sold as 1 per pack..Width: 1 in.Length: 36 yds.Thickness: 2 mil film, 3.5 mil total.Temperature: -269 - 260 deg C (-452 - 500 deg F).Material: Polymide film, silicone adhesive.Maintains high temperature resistance.Good electrical insulator.Excellent abrasion resistance and high dialectic strength.Silicon adhesive protection leaves no residue.DuPont Kapton polyimide films have high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperature, vibration and other demanding environments.Polyimide films make innovative design solutions possible in a range of industries including, consumer electronics, solar photovoltaic and wind energy, aerospace, automotive and industrial applications.Applications: Automotive sensor and manifolds, etching, fiber optics cable, high temperature powder coating, semiconductor manufacturing, wave soldering during circuit board assembly.Standards and compliance: RoHS.2 mil, 1" x 36 yds. kapton tapes are used in applications at temperatures as low as 269 deg C ( 452 deg F) and as high as 260 deg C (500 deg F).

Bertech Kapton tapes are made from Kapton HN film with silicone adhesive. They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F). 2 mil film thickness with 1.5 mil silicone adhesive. DuPont Kapton polyimide films have set the industry standard for over 45 years in high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments. Kapton tapes have high dielectric strength. The silicon adhesive protection leaves no residue..1" x 36 yds. long heat resistant tape.Film thickness: 0.05mm, adhesive thickness: 0.04mm, total thickness: 0.09mm.These tapes are designed for masking of electronic and other components during the assembly and manufacturing process.Comes in amber color.Silicone adhesive, which does not leave any residue.Tensile strength is 50 lbs./inch.Meets or exceeds RoHS standard.They are reliable and durable, with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other volatile environments.Polyimide films make innovative design solutions possible in a range of industries, including consumer electronics, solar photovoltaic, wind energy, aerospace, automotive, and industrial applications.They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F)

Bertech Kapton tapes are made from Kapton HN film with silicone adhesive. They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F). 2 mil film thickness with 1.5 mil silicone adhesive. DuPont Kapton polyimide films have set the industry standard for over 45 years in high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments. Kapton tapes have a high dielectric strength. The silicon adhesive protection leaves no residue..3" x 36 yds. long heat resistant tape.Film thickness: 0.05mm, adhesive thickness: 0.04mm, total thickness: 0.09mm.These tapes are designed for masking of electronic and other components during the assembly and manufacturing process.Comes in amber color.Silicone adhesive, which does not leave any residue.Tensile strength is 50 lbs./inch.Meets or exceeds RoHS standard.They are reliable and durable, with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other volatile environments.Polyimide films make innovative design solutions possible in a range of industries, including consumer electronics, solar photovoltaic, wind energy, aerospace, automotive, and industrial applications.They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F)

Bertech Kapton tapes are made from Kapton HN film with silicone adhesive. They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F). 2 mil film thickness with 1.5 mil silicone adhesive. DuPont Kapton polyimide films have set the industry standard for over 45 years in high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments. Kapton tapes have a high dielectric strength. The silicon adhesive protection leaves no residue..2" x 36 yds. long heat resistant tape.Film thickness: 0.05mm, adhesive thickness: 0.04mm, total thickness: 0.09mm.These tapes are designed for masking of electronic and other components during the assembly and manufacturing process.Comes in amber color.Silicone adhesive, which does not leave any residue.Tensile strength is 50 lbs./inch.Meets or exceeds RoHS standard.They are reliable and durable, with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other volatile environments.Polyimide films make innovative design solutions possible in a range of industries, including consumer electronics, solar photovoltaic, wind energy, aerospace, automotive, and industrial applications.They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F)