Large Shelving Units
143 results
5-Tier Heavy-Duty Adjustable Shelving Unit with 800-lb Shelf Capacity, Chrome.Holds up to 800 pounds per shelf.Heavy-duty steel construction.Shelf heights adjustable to fit your storage needs.Use as residential or commercial shelving unit
Heavy-duty, high grade metal shelving unit made by Quantum Storage Systems. The 13 metal shelves are easy to clean and will not rust or corrode. Shelves assemble with 4 nuts and bolts per shelf..Offers 400 lbs. capacity per shelf.36" Wide shelving, has a smooth powder coat finish.Dimensions: 72" x 36" x 12"
You were hungry for a storage shelving solution that could handle all the chaos of your kitchen. That’s why you ordered up these 4-Tier Commercial Grade Adjustable Shelving Unit and propped them on the south wall of your pantry. Each tier of utility shelving holds up to 250 pounds, providing a heavy duty storage solution for any room in your home. Add Honey-Can-Do caster wheels to these storage shelves and easily move the shelves from room to room..Holds up to 250 pounds per shelf.Heavy-duty steel construction.Shelf heights adjustable to fit your storage needs.Use as residential or commercial shelving units.Caster wheels can be purchased separately to add mobility.Create visible, accessible storage space instantly with Honey Can Do Capacity Shelving Unit.
Tennsco Stur-D-Stor boltless steel shelving in sand color has evenly distributed 100 lbs per shelf holding capacity. Steel shelf with 24" deep shelves includes shelves and posts..5 shelf unit.100 lbs per shelf holding capacity if evenly distributed.Ready To Assemble (No bolts or screws required).Sand colored finish steel posts.Industrial grade particleboard shelves.Weight: 150 lbs.Commercial grade for the office.Boltless design lets you easily configure shelving into a 5-shelf unit or a 3-shelf/2-shelf worktable.Industrial-grade particleboard shelves with sand color steel frame.Each shelf holds up to 1,000lbs., adjusts in 1-1⁄2" increments.Upright: 84Hx48"W; worktable: 42Hx97"W.Assembly required.Medium-grey finish.48" W x 24" D x 84" H.Ready to assemble (No bolts or screws required).Vertical dimensions: 72"H x 36"W.Horizontal dimensions: 36"H x 72"W.100 lb. per shelf holding capacity if evenly distributed.5 compartments.Available in 18 1/2" and 24" deep shelves.Shelves are repositionable in 1 1/2" increments.Set includes shelves and posts.Freestanding storage shelf unit is made of steel.Tennsco Stur-D-Stor boltless steel shelving in sand color has 5 shelves and measures 72" x 36" x 24" vertically and 36" x 72" x 24" horizontally.
Honey-Can-Do SHF-05225 4-Tier Steel Urban Adjustable Storage Shelving Unit, Black. Create visible, accessible storage space instantly with Honey-Can-Do industrial shelving systems. Contemporary black finish and steel frame make this unit the perfect blend of style and functionality. Durable enough for the home, garage, pantry, or commercial kitchen; this commercial grade shelving is capable of withstanding up to 350lbs per shelf. Adjustable shelves allow you to change the configuration as your storage needs evolve. Combine multiple units to create a customized storage wall. The no-tool assembly allows you to construct in minutes a shelving unit that will last for years..sturdy steel frame.easy no tool assembly.rated for 350lbs per shelf capacity
Honey-Can-Do SHF-06832 5-Tier Steel Urban Adjustable Storage Shelving Unit, Chrome. Create visible, accessible storage space instantly with Honey-Can-Do industrial shelving systems. Contemporary chrome finish and steel frame make this unit the perfect blend of style and functionality. Durable enough for the home, garage, pantry, or commercial kitchen; this commercial grade shelving is capable of withstanding up to 350lbs per shelf. Adjustable shelves allow you to change the configuration as your storage needs evolve. Combine multiple units to create a customized storage wall. The no-tool assembly allows you to construct in minutes a shelving unit that will last for years..Rated for 350 lbs per shelf.Adjustable height shelves.No-tool assembly
22-gauge frame, open unit with shelves has strength and versatility.Includes five 18"D industrial steel shelves with 500 lb., capacity per shelf evenly distributed.87"H x 48"W x 18"D.Long lasting, durable medium grey paint finish.Starter units include: 4 off-set angle posts, 2 side braces, 1 back brace and shelves.Contains a minimum of 20% recycled content.One year limited warranty.Unassembled.Special Order Item-Non-Returnable
22-gauge open unit steel frame.Five industrial grade 12"D shelves with 750 lb., shelf capacity, evenly distributed.87"H x 36"W x 12"D.Long lasting, durable paint finish.Contains a minimum of 20% recycled content.One year limited warranty.Unassembled.Special Order Item-Non-Returnable
Honey-Can-Do® 4-Tier shelving unit in chrome color features stackable shelves that provide flexible storage capacity up to 250 lbs. Shelving unit offers easy access to the items with an open design and adds a modern touch to your home..Adjustable shelves.250 Lb. Capacity Per Shelf.36 in L x 14 in W x 54 in H.Honey-Can-Do Four-Tier Storage Shelving Unit - Practical Storage
Tennsco Add-on Unit for snap-together open shelving has evenly distributed 200 lbs. to 300 lbs. per shelf holding capacity. Shelf unit with 12" deep shelves include shelf support with five-file dividers per shelf..Heavy-duty rolled-steel construction with sand finish.36" x 88".Units snap together without tools and fasteners.Uses half the floor space of conventional files.200- to 300-lb capacity per shelf.Starter set provides a single freestanding unit.Add-on units form a complete wall system.All shelves are adjustable.Order one starter set and any number of matching-height add-on units.Two "L" uprights form the same frame.Add-on unit is a "T"-shaped upright that attaches to Starter Set to join units.Tennsco Add-on Unit for snap-together open shelving with 7 shelves measures 88" x 36" x 12".
Honey-Can-Do SHF-03936 4-Tier Steel Urban Adjustable Storage Shelving Unit, Black. Create visible, accessible storage space instantly with Honey-Can-Do industrial shelving systems. Contemporary black finish and sturdy steel frame make this unit the perfect blend of style and functionality. Durable enough for the home or garage; this commercial grade shelving is capable of withstanding up to 350lbs per shelf. Adjustable shelves allow you to change the configuration as your storage needs evolve. Combine multiple units to create a customized storage wall. The no-tool assembly allows you to construct in minutes a shelving unit that will last for years..Sturdy steel frame.Easy no tool assembly.Rated for 350lbs per shelf capacity
Honey-Can-Do SHF-05226 4-Tier Steel Urban Adjustable Storage Shelving Unit, Chrome. Create visible, accessible storage space instantly with Honey-Can-Do industrial shelving systems. Contemporary steel frame make this unit the perfect blend of style and functionality. Durable enough for the home, garage, pantry, or commercial kitchen; this commercial grade shelving is capable of withstanding up to 350lbs per shelf. Adjustable shelves allow you to change the configuration as your storage needs evolve. Combine multiple units to create a customized storage wall. The no-tool assembly allows you to construct in minutes a shelving unit that will last for years..Sturdy steel frame.Easy no tool assembly.Rated for 350lbs per shelf capacity
22-gauge frame, open unit with shelves has strength and versatility.Includes five 18"D industrial steel shelves with 750 lb., capacity per shelf evenly distributed.87"H x 36"W x 18"D.Long lasting, durable medium grey paint finish.Starter units include: 4 off-set angle posts, 2 side braces, 1 back brace and shelves.Contains a minimum of 20% recycled content.One year limited warranty.Unassembled.Special Order Item-Non-Returnable
Organize your pantry, supply room, or garage with a Honey-Can-Do five-tier shelving unit. Use the unit to store up to 200 pounds per shelf when the items are evenly distributed, making the most out of limited space. Easily customize the setup of the unit by adjusting the height of the shelves to suit your needs..Color: Chrome.Adjustable shelves and stackable components.200 Lb. Per Shelf Weight Capacity, When Evenly Distributed.36 in L x 14 in W x 72 in H.Honey-Can-Do Five-Tier Shelving Unit - Adjustable Shelves
Heavy-duty steel frame with adjustable shelves.Each 24"D steel shelf supports up to 400 pounds per shelf.76"H x 48"W x 24"D.Rivet design allows for quick assembly.Adjustable shelves, dividers and backstops, closed end panels.Units are prepackaged.Long lasting, durable sand finish.Contains a minimum of 20% recycled content.One year limited warranty.Special Order Item-Non-Returnable
20-gauge frame, open unit with shelves has strength and versatility.Includes five 24"D industrial steel shelves with 700 lb., capacity per shelf evenly distributed.87"H x 36"W x 24"D.Long lasting, durable medium grey paint finish.Starter units include: 4 off-set angle posts, 2 side braces, 1 back brace and shelves.Contains a minimum of 20% recycled content.One year limited warranty.Unassembled.Special Order Item-Non-Returnable
22-gauge frame, open unit with shelves has strength and versatility.Includes five 24"D industrial steel shelves with 700 lb., capacity per shelf evenly distributed.87"H x 36"W x 24"D.Long lasting, durable medium grey paint finish.Starter units include: 4 off-set angle posts, 2 side braces, 1 back brace and shelves.Contains a minimum of 20% recycled content.One year limited warranty.Unassembled.Special Order Item-Non-Returnable
20-gauge frame, open unit with shelves has strength and versatility.Includes six 24"D industrial steel shelves with 700 lb., capacity per shelf evenly distributed.87"H x 36"W x 24"D.Long lasting, durable medium grey paint finish.Starter units include: 4 off-set angle posts, 2 side braces, 1 back brace and shelves.Contains a minimum of 20% recycled content.One year limited warranty.Unassembled.Special Order Item-Non-Returnable
Heavy gauge double rivet boltless design provides exceptional strength and unit rigidity.Z-Line low profile shelving unit have a load capacity of 500 lbs., per shelf evenly distributed.84"H x 48"W x 24"D.Long lasting medium grey durable paint finish.Unassembled - quick, easy assembly with a mallet, no nuts and bolts.Unobstructed access from all sides.Contains a minimum of 20% recycled content.One year limited warranty.Special Order Item-Non-Returnable
22-gauge frame, open unit with shelves has strength and versatility.Includes seven 24"D industrial steel shelves with 700 lb., capacity per shelf evenly distributed.87"H x 36"W x 24"D.Long lasting, durable medium grey paint finish.Starter units include: 4 off-set angle posts, 2 side braces, 1 back brace and shelves.Contains a minimum of 20% recycled content.One year limited warranty.Unassembled.Special Order Item-Non-Returnable
Heavy-duty steel frame with adjustable shelves.Each 15"D steel shelf supports up to 400 pounds per shelf.76"H x 36"W x 15"D.Rivet design allows for quick assembly.Adjustable shelves, dividers and backstops, closed end panels.Units are prepackaged.Long lasting, durable sand finish.Contains a minimum of 20% recycled content.One year limited warranty.Special Order Item-Non-Returnable
Heavy gauge double rivet boltless design provides exceptional strength and unit rigidity.Z-Line low profile shelving unit have a load capacity of 600 lbs., per shelf evenly distributed.84"H x 36"W x 12"D.Long lasting medium grey durable paint finish.Unassembled - quick, easy assembly with a mallet, no nuts and bolts.Unobstructed access from all sides.Contains a minimum of 20% recycled content.One year limited warranty.Special Order Item-Non-Returnable
Heavy gauge double rivet boltless design provides exceptional strength and unit rigidity.Includes three 30"D industrial steel shelves with 2,250 lb., capacity per shelf evenly distributed.84"H x 48"W x 30"D.Long lasting durable medium grey paint finish.Quick, easy assembly with a mallet - no nuts and bolts.Unobstructed access from all sides.Contains a minimum of 20% recycled content.Unassembled.One year limited warranty.Special Order Item-Non-Returnable
Tennsco Add-on Unit for snap-together open shelving has evenly distributed 200 lbs to 300 lbs per shelf holding capacity. Shelf unit with 12" deep shelves includes shelf supports and five-file dividers/shelf..200 lb to 300 lb per shelf holding capacity if evenly distributed.Dimensions: 88"H x 48"W x 12"D.Ready To Assemble (Units snap together without tools or fasteners).12 inch deep shelves.Sand finish heavy-duty steel construction.T shaped upright attaches to Starter set (sku 350886) to join units.Set includes shelves, shelf supports and five file dividers per shelf.Shelves are adjustable.Starter unit (sku 350886) required to use this item.Mfr. limited lifetime warranty.Closed add-on unit—T shaped upright attaches to starter set shelving unit (item# 128848PCSD) to join units together.Includes adjustable 12" deep shelves, shelf supports and five file dividers per shelf.Heavy-duty rolled steel construction.Sand finish.200- to 300-lb. load capacity per shelf (with weight evenly distributed).Units snap together without tools or fasteners.All shelves are adjustable.44x88".7 shelves.Shpg. wt. 147lbs..Heavy-duty rolled-steel construction with sand finish.Units snap together without tools and fasteners.Uses half the floor space of conventional files.Starter set provides a single freestanding unit.Add-on units form a complete wall system.Order one starter set and any number of matching-height add-on units.Two "L" uprights form the same frame.Add-on unit is a "T"-shaped upright that attaches to Starter Set to join units.Tennsco Add-on Unit for snap-together open shelving with 7 shelves measures 88" x 48" x 12".
Tennsco Commercial Shelving Unit, Supports 1,000 lbs. per Shelf, Sand, 72"H x 36"W x 18 1/2"D.72"H x 36"W x 18 1/2"D.Boltless design allows you to configure shelving into a five-shelf unit (shown) or a three-shelf/two-shelf worktable.Each shelf holds up to 1,000 lb., and adjusts in 1-1/2" increments.Industrial-grade particle board shelves with steel frame
Heavy gauge double rivet boltless design provides exceptional strength and unit rigidity.Z-Line low profile shelving unit have a load capacity of 500 lbs., per shelf evenly distributed.84"H x 48"W x 24"D.Long lasting medium grey durable paint finish.Unassembled - quick, easy assembly with a mallet, no nuts and bolts.Unobstructed access from all sides.Contains a minimum of 20% recycled content.One year limited warranty.Special Order Item-Non-Returnable
The AD74-1836C Chrome Wire Shelving Add-On Kit has been specifically designed to expand Chrome Wire Shelving Starter Kits. A set of posts is shared between the two kits. Each Add-On Kit comes with 2 posts, 4 shelves and 8 S-hooks..36" x 18" x 74".800 lb. capacity.1/each.Chrome Finish
The AD74-2448C Chrome Wire Shelving Add-On Kit is used to extend the storage space of a Chrome Wire Shelving Starter Kit. It can be installed in a back-to-back, sideways or right angle configuration. Each wire shelf allows air to circulate freely and has a load capacity of 800 lbs..48" x 24" x 74".800 lb. capacity.1/each.Chrome Finish
The AD74-2460C Chrome Wire Shelving Add-On Kit allows for the extension of a corresponding Chrome Wire Shelving Starter Kit. It can be installed in a parallel, side to side or right angle configuration. Each wire shelf allows air to circulate freely and has a load capacity of 600 lbs. Each Add-On Kit comes with 2 posts, 4 shelves and 8 S-hooks..60" x 24" x 74".600 lb. capacity.1/each.Chrome Finish
Heavy gauge double rivet boltless design provides exceptional strength and unit rigidity.Includes three 24"D industrial steel shelves with 1,750 lb., capacity per shelf evenly distributed.84"H x 72"W x 24"D.Long lasting durable medium grey paint finish.Quick, easy assembly with a mallet - no nuts and bolts.Unobstructed access from all sides.Contains a minimum of 20% recycled content.Unassembled.One year limited warranty.Special Order Item-Non-Returnable
The AD74-2436C Chrome Wire Shelving Add-On Kit can be attached to a Chrome Starter Kit to extend its storage capacity. This can be done in a number of configurations including parallel, side to side and right angle arrangements. Comes with four shelves (800 lbs. of weight capacity each), two posts and eight S-Hooks.36" x 24" x 74".800 lb. capacity.1/each.Chrome Finish
The WR74-2472C Chrome Wire Shelving Starter Kit comes complete with four shelves, four posts, and requires no tools to assemble. Each shelf has a load capacity of up to 600 lbs. Split conical sleeves attach shelf corners to posts. Suitable for use in dry areas..Adjustable Open Wire Shelving - Starter Units.72" x 24" x 74".600 lb. capacity.Shelves have all-welded construction and extra wire trussing to increase shelf strength.Chrome Finish
22-gauge steel frame with heavy duty shelves with box beam construction.Five shelves, 18"D have load bearing capacities up to 500 lbs., evenly distributed.87"H x 48"W x 18"D.Long lasting medium grey durable paint finish.Closed unit with Industrial grade shelving.Starter Units include: 4 off-set angle posts, 2 sides, 1 back and shelves.Contains a minimum of 20% recycled content.One year limited warranty.Unassembled.Special Order Item-Non-Returnable
Heavy gauge double rivet boltless design provides exceptional strength and unit rigidity.Standard 14 gauge double rivet beam has 2 3/4" profile and each shelf can handle loads up to 1,800 lbs.84"H x 69"W x 30"D.Medium grey paint with enamel finish to ensure years of lasting beauty.Unassembled-quick, easy assembly with a mallet, no nuts and bolts.Unobstructed access from all sides.Contains a minimum of 20% recycled content.One year limited warranty.Special Order Item-Non-Returnable
The WR74-1848C Chrome Wire Shelving Starter Kit can be used in conjunction with a Chrome Wire Shelving Add-On Kit to increase the storage capacity. This unit is suitable for use in dry areas. Can be configured in a right angle, straight line and back-to-back alignment when attached to an Add-On Unit..Adjustable Open Wire Shelving - Starter Units.48" x 18" x 74".800 lb. capacity.Shelves have all-welded construction and extra wire trussing to increase shelf strength.Chrome Finish
Heavy-duty steel frame with adjustable shelves.Each 15"D steel shelf supports up to 400 pounds per shelf.76"H x 36"W x 15"D.Rivet design allows for quick assembly.Adjustable shelves, dividers and backstops, closed end panels.Units are prepackaged.Long lasting, durable sand finish.Contains a minimum of 20% recycled content.One year limited warranty.Special Order Item-Non-Returnable
The WR74-1860C Chrome Wire Shelving Starter Kit can be used in conjunction with a Chrome Wire Shelving Add-On Kit to increase the storage capacity. Can be configured in a right angle, straight line and back-to-back alignment when attached to an Add-On Unit..Adjustable Open Wire Shelving - Starter Units.60" x 18" x 74".600 lb. capacity.Shelves have all-welded construction and extra wire trussing to increase shelf strength.Chrome Finish
The WR74-2460C Chrome Wire Shelving Starter Kit comes complete with four posts and four shelves. Each shelf has a load capacity of up to 600 lbs. Suitable for use in dry areas..Adjustable Open Wire Shelving - Starter Units.60" x 24" x 74".600 lb. capacity.Shelves have all-welded construction and extra wire trussing to increase shelf strength.Chrome Finish
Heavy gauge double rivet boltless design provides exceptional strength and unit rigidity.Z-Line low profile shelving unit have a load capacity of 600 lbs., per shelf evenly distributed.84"H x 36"W x 18"D.Long lasting medium grey durable paint finish.Unassembled - quick, easy assembly with a mallet, no nuts and bolts.Unobstructed access from all sides.Contains a minimum of 20% recycled content.One year limited warranty.Special Order Item-Non-Returnable
The WR74-1872C Chrome Wire Shelving Starter Kit can be used in conjunction with a Chrome Wire Shelving Add-On Kit to increase the storage capacity. Can be configured in a right angle, straight line and back-to-back alignment when attached to an Add-On Unit. Suitable for use in dry areas..Adjustable Open Wire Shelving - Starter Units.72" x 18" x 74".600 lb. capacity.Shelves have all-welded construction and extra wire trussing to increase shelf strength.Chrome Finish
22-gauge steel frame with heavy duty shelves with box beam construction.Seven shelves, 24"D have load bearing capacities up to 700 lbs., evenly distributed.87"H x 36"W x 24"D.Long lasting medium grey durable paint finish.Closed unit with Industrial grade shelving.Starter Units include: 4 off-set angle posts, 2 sides, 1 back and shelves.Contains a minimum of 20% recycled content.One year limited warranty.Unassembled.Special Order Item-Non-Returnable
Heavy gauge double rivet boltless design provides exceptional strength and unit rigidity.Includes three 48"D industrial steel shelves with 2,000 lb., capacity per shelf evenly distributed.84"H x 60"W x 48"D.Long lasting durable medium grey paint finish.Quick, easy assembly with a mallet - no nuts and bolts.Unobstructed access from all sides.Contains a minimum of 20% recycled content.Unassembled.One year limited warranty.Special Order Item-Non-Returnable
The Five Shelf Tower is great in any room. This steel construction heavy-duty shelving unit is durable enough for most uses and sports a modern design. It is an excellent storage solution for craft rooms, offices, kitchen, pantries, or more. Sized at 72" x 24" x 14", this attractive and strong shelving unit gives you flexibility for whatever your storage and organization needs are. Whether you need a shelf for your printer, books, craft supplies, or additional kitchen storage, this 5-shelf tower is the answer. The additional wheels also allow this shelving unit to be easily moved as needed. Assembly is required..Five steel shelves provide space to store and display your belongings.Two locking casters to keep your bookcase in place.Modern, Industrial design in black.Dimensions: 72" H x 24" W x 14" D.Assembly required, hardware included.Perfect for dorm rooms, home offices, and beyond, our innovative design combines the elegance of a bookcase with the functionality of storage shelving, ensuring your space remains both functional and stylish.
The WR74-1836C Open Wire Shelving Starter Kit can be used in conjunction with a Chrome Wire Shelving Add-On Kit to increase the storage capacity. Can be configured in a right angle, straight line and back-to-back alignment when attached to an Add-On Unit..Adjustable Open Wire Shelving - Starter Units.36" x 18" x 74".800 lb. capacity.Shelves have all-welded construction and extra wire trussing to increase shelf strength.Chrome Finish
Heavy gauge double rivet boltless design provides exceptional strength and unit rigidity.Standard 14 gauge double rivet beam has 2 3/4" profile and each shelf can handle loads up to 1,800 lbs.60"H x 69"W x 30"D.Medium grey paint with enamel finish to ensure years of lasting beauty.Unassembled-quick, easy assembly with a mallet, no nuts and bolts.Unobstructed access from all sides.Contains a minimum of 20% recycled content.One year limited warranty.Special Order Item-Non-Returnable
22-gauge steel frame with heavy duty shelves with box beam construction.Six shelves, 12"D have load bearing capacities up to 750 lbs., evenly distributed.87"H x 36"W x 12"D.Long lasting medium grey durable paint finish.Closed unit with Industrial grade shelving.Starter Units include: 4 off-set angle posts, 2 sides, 1 back and shelves.Contains a minimum of 20% recycled content.One year limited warranty.Unassembled.Special Order Item-Non-Returnable
Heavy gauge double rivet boltless design provides exceptional strength and unit rigidity.Includes three 24"D industrial steel shelves with 2,000 lb., capacity per shelf evenly distributed.84"H x 60"W x 24"D.Long lasting durable medium grey paint finish.Quick, easy assembly with a mallet - no nuts and bolts.Unobstructed access from all sides.Contains a minimum of 20% recycled content.Unassembled.One year limited warranty.Special Order Item-Non-Returnable
Tennsco Add-on Unit for snap-together open shelving has evenly distributed 200 lbs to 300 lbs per shelf holding capacity. Shelf unit with 12" deep shelves includes shelves, shelf supports along with 5-file dividers per shelf..Dimensions: 76"H x 48"W x 12"D.Ready To Assemble (Units snap together without tools or fasteners).T shaped upright attaches to Starter set to join units.Starter unit required to use this item.Weight: 140 lbs.Mfr. limited lifetime warranty.Closed add-on unit—T shaped upright attaches to starter set shelving unit (item# 127648PCSD) to join units together.Includes adjustable 12" deep shelves, shelf supports and five file dividers per shelf.200- to 300-lb. load capacity per shelf (with weight evenly distributed).All shelves are adjustable.Shpg. wt. 130lbs..Heavy-duty rolled-steel construction with sand finish.Unit includes 6 shelves.Uses half the floor space of conventional files.200- to 300-lb capacity per shelf.Starter set provides a single freestanding unit.Add-on units form a complete wall system.Units snap together without tools and fasteners.Order one starter set and any number of matching-height add-on units.Two "L" uprights form the same frame.Tennsco Add-on Unit for snap-together open shelving with 6 shelves measures 76" x 48" x 12".