Mounting Bracket Kits

MI-9000 screen adapter kit will fit practically all LCD and LED/OLED monitor with a bezel height of 11.5 to 19.2 inches with thickness of up to 2.75 inches. These dimensions should be compatible with most monitors up to 30 inches in screen size. The versatile arms are designed to mate with any VESA monitor mounts with VESA 75x75 and 100x100 mm configurations. All the necessary hardware and installation instructions are included in the package..Compatible with most monitors up to 30 inches in screen size.VESA 75x75 and 100x100 mm configurations.Can safely carry up to 17.6 lbs. monitors.Supported by manufacturer's limited lifetime warranty.MI-9000 VESA adaptor attaches to your non-VESA compatible monitor and allows it to be connected to the industry-standard monitor desk mounts and stands.

The AP-MNT-W4 Mount Kit is a low-profile mount kit for attaching APs to a solid, flat surface, such as a wall or the ceiling. The low-profile design means that there will be limited space, about 11.5mm, between the back of the AP and the mount surface. For APs with straight entry Ethernet ports, an Ethernet cable with an angled plug can be used, or an adapter cable and coupler are provided..Campus AP mount bracket kit (Individual) type E: wall-box.Compatible with Aruba campus access points.Dimensions: 7.8"L x .6"H x 6.95"W

The Kingston® mounting bracket is great for installing 2 1/2" hard disk drives and 2 1/2" solid state drives in 3 1/2" drive bays..Compatible drive bay width: 2 1/2" to 3 1/2".Compatible with Kingston solid-state drive.Sold as each.Compatible drive bay width: 2 1/2" to 3 1/2".Compatible with Kingston solid-state drive

StarTech Hard Drive Mounting Bracket Adapter, (BRACKET).Bay provided: 1 x 3 1/2" internal.Bay required: 1 x 5 1/2".Allow 3 1/2" hard drives to be mounted in standard 5 1/4" drive bays.Four mounting screws included.Install additional 3 1/2" hard drives into unused 5 1/4" bays for increased storage.Material: Metal.Package contents: Metal mounting brackets, mounting screws (#6-32), mounting screws (M3).2 years warranty.2 years warranty.StarTech.com Hard Drive Mounting Bracket Adapter - Hard Drive Accessories

The Panasonic® CF-LNDBRK120 mounting bracket is perfect for use with Panasonic CF-LNDDC120 power adapter..Panasonic CF-LNDDC120 Power adapter.Application: Panasonic toughbook 31.Compatibility: Panasonic CF-LNDDC120 power adapter.Power: 120 W.Panasonic® Accessories Lind mounting bracket is compatible with Panasonic® CF-LNDDC120 power adapter.

WMBM Wall Mount Bracket is small simple tab that allow a single Transition Networks media converter to be mounted anywhere needed. The bracket is available to match the different sized media converters and space requirements..Limited Warranty: Lifetime.3.3" WMBM Wall Mount Bracket.Part Number: WMBM

Make it simple for employees or customers to access your Motorola MK500 Micro Kiosk price checker with this Motorola wall mount kit. This kit's sturdy attachment plate is constructed from metal for durability, and it feature predrilled holes for easy installation. You can attach the wall mount in a variety of ways, including on a desktop, wall, or countertop..Compatibility: Motorola MK500 micro kiosk.Device supported: barcode scanner.Type: Wall mount kit.You can attach the wall mount in a variety of ways, including on a desktop, wall, or countertop.Easy to access.Features predrilled holes to make installation simple.Mounted.Kit's sturdy attachment plate is constructed from metal for durability, and it feature predrilled holes for easy installation.Motorola Wall Mount Kit - Enable Simple Price Checking

The Zebra KT-SCANMNT-VC80-R is a durable side-mounted scanner holder designed for use with VC80 vehicle-mounted computers. Compatible with LSxxxx and DSxxxx rugged scanners, it offers flexible mounting on either the left or right side and integrates seamlessly with the MT4100 Quick Release Mount. Ideal for warehouse and industrial settings, this holder ensures your scanner is always within reach, improving workflow efficiency and reducing downtime..This is a side-mounted scanner holder designed for securely mounting Zebra LSxxxx and DSxxxx rugged barcode scanners to VC80 vehicle-mounted computers in industrial and warehouse environments..Constructed from durable industrial-grade black plastic and metal components, designed to withstand rugged use in harsh environments..Exact dimensions and weight are not specified by the manufacturer, but it is compact and lightweight, typically under 16 oz., designed for ergonomic side mounting..This is a mechanical holder and does not include any ports or electronic interfaces..Includes a 1-year manufacturer warranty against defects in materials and workmanship..Package includes one side-mounted scanner holder compatible with VC80 vehicle-mounted computers and select Zebra rugged scanners.

2.5 SSD/HDD Mounting Bracket for 3.5 Drive Bay - 5 Pack - Tool-less - Hard Drive Mounting Kit (BRACKET125PTP).Compatible with most 2.5" SSD/HDD drives including: IDE, SAS, SATA, U.2 and more.Install one 2.5” SSD or HDD into a single 3.5” bay.Supports drives 7 mm or 9.5 mm in height.Tool-less drive and bay installation.2.5" Hard Drive Mount | Tool-less Installation

Aruba Wi-Fi 6 access points provide high-performance connectivity for any organization experiencing growing numbers of IoT and mobility requirements. With a combined peak data rate of up to 2.97Gbps, the 530 Series deliver the speed and reliability needed for any enterprise..9/16 profile mount bracket kit (individual) type C ( suspended ceiling rail) designed for Aruba 530 series access points.Compatible with Aruba 530 access points.Kit contains mounts for one access point

The Mount-It! MI-TVHWKIT is a universal TV-mounting hardware kit that works with any TV and TV wall mount on the market. The set includes 92 pieces of M4, M5, M6, M8 TV screws, washers, and spacers. Each package is labeled for convenience and sorted for easy hardware selection. The included screws, washers, and spacers are made of high-quality steel. The spacers can be combined to find the perfect fit for your TV. Fits the majority of 19"-85" screens on the market..Universal TV-mounting hardware kit that works with any TV and TV wall mount.Compatibility: 19"-85" screens.Made of high-quality steel.Set includes 92 pieces of M4, M5, M6, M8 TV screws, washers, and spacers.Each package is labeled for convenience.Screws: four 12mm M4, four 35mm M4, four 12mm M5, four 35mm M5, four 12mm M6, four 20mm M6, four 35mm M6, four 16mm M8, four 20mm M8, four 25mm M8, four 30mm M8, four 35mm M8, four 40mm M8, four 45mm M8, four 50mm M8.Washers: eight M4/M5, eight M6/M8.Spacers: eight 2.5mm M6/M8, four 20mm M6/M8, four 12mm M4/M5.Supported by manufacturer's limited lifetime warranty

Zebra Technologies Zebra BRKT-SCRD-SMRK-01 Mounting Bracket for Cradle.Allows for rack and wall mounting of one 5-Slot, 10-Slot, or 20-Slot Charger. Also can be used to mount up to four 4Slot Battery Chargers or Single-Slot Cradles.Bracket can be mounted on standard 19" network rack or on a wall..Cable routing slots & removable power supply holder tray..Adjustable tabs & screw mounts for easy hanging/installation..Works with Zebra's high-end performance products..WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects, or other reproductive harm..Rack/Wall Bracket, allows to install any multi-slot Sharecradle on a wall or a 19inch IT rack. Provides a holder for power supply and cords. Also allows to install up to four 4-Slot Spare Battery Chargers. Includes screws required for installation

Black sandwich kit II mounting bracket is ideal for Lenovo ThinkCentre tiny PC..Mounting bracket is compatible with Lenovo ThinkCentre tiny PC.Dimensions: 7.2"H x 7.2"W x 2.3"D.Color: Black

The Liebert® rack-mount bracket kit includes two brackets, two M5 screws, two inner bracket, 16 M4 x 8 mm machine screws, 12 M5 x 16 mm machine screws, eight M4 nuts and grease packet. It has hardware for mounting rack slide to rack frame, hardware for mounting rack slide to UPS. This kit is compatible with Liebert UPStation GXT 2U and associated battery cabinets..Incorporates hardware for mounting rack slide to rack frame and for mounting rack slide to UPS.Suitable for Liebert UPStation GXT 2U.Contains two brackets, two M5 screws, two inner bracket, 16 x M4 x 8 mm machine screws, 12 M5 x 16 mm machine screws, eight M4 nuts and grease packet

Versatile mounting system for UAP-AC-PRO, UAP-AC-HD, UAP-AC-SHD, and above..Device Supported: Wireless Access Point.UniFi Professional Mounting System.Part Number: U-PRO-MP

Make it easy to find and get to the right meeting space with Tap Scheduler, a purpose-built scheduling panel that signals availability from a distance. Up close, see meeting details, claim rooms, and book meetings on a spacious 10.1" screen. Easily configure Tap Scheduler as a Microsoft Teams panel, as a Zoom Rooms Scheduling Display, with Meetio, Robin, or other room scheduling solutions in just a few simple steps. Provide a professional install with included glass, mullion, and wall mounts and clean cable management. Count on Tap Scheduler for reliable performance with durable components that are built to last. Remarkably simple to set up and designed for deployment at scale, Tap Scheduler can be added to any room to make the most out of meeting spaces. Make it easy to find and claim the right meeting space with Tap Scheduler, a purpose-built scheduling panel that is easily installed outside any room for fast deployment. Set up Tap Scheduler as a Microsoft Teams panel, as a Zoom Rooms Scheduling Display, with Meetio, Robin, and other leading room scheduling solutions. Quickly find an open room through colored LED lights that show availability at a distance. Up close, see room details, claim the space, or reserve the room on the spacious touchscreen. Easily install Tap Scheduler outside any room with the included glass, mullion, and wall mounts. Multiple routing options hide the single PoE cable for a clean and professional setup. With a 10.1" touchscreen display, flat angle, and low profile, Tap Scheduler allows for easy reading from a variety of heights. With a purposeful design and durable components, Tap Scheduler is built for reliable performance that lasts. Configure Tap Scheduler out of the box in just a few easy steps for fast setup and deployment. With Logitech Sync, you can monitor and manage Tap Scheduler along with your other meeting room devices from one single platform..Make it easy to find and claim the right meeting space with Tap Scheduler, a purpose-built scheduling panel that is easily installed outside any room for fast deployment..Set up Tap Scheduler as a Microsoft Teams panel, as a Zoom Rooms Scheduling Display, with Meetio, Robin, and other leading room scheduling solutions..Quickly find an open room through colored LED lights that show availability at a distance. Up close, see room details, claim the space, or reserve the room on the spacious touchscreen..Easily install Tap Scheduler outside any room with the included glass, mullion, and wall mounts. Multiple routing options hide the single PoE cable for a clean and professional setup..The product does not have megapixels or resolution as it is a mounting accessory, not a camera..With a 10.1” touchscreen display, flat angle, and low profile, Tap Scheduler allows for easy reading from a variety of heights..With a purposeful design and durable components, Tap Scheduler is built for reliable performance that lasts..Configure Tap Scheduler out of the box in just a few easy steps for fast setup and deployment..With Logitech Sync, you can monitor and manage Tap Scheduler along with your other meeting room devices from one single platform..The mounting bracket is approximately 6.5" H x 9.68" W x 2.85" D.Connectivity features are not applicable as it is a physical mounting accessory without electronic components.

Extension rails and brackets for four-point mounting for Cisco Catalyst 9500 Series.Rack Rail Bracket Kit.Device Supported: Switch.Compatibility: Cisco Catalyst 9500 Series Switch.Package Content : Brackets, Extension rails.For Cisco Catalyst 9500 Series – High-End

Transform your meetings with the Poly G7500 IP Table Microphone—where clarity meets innovation. Built for high-performance video conferencing, this sleek tabletop microphone delivers exceptional audio quality through advanced beamforming technology that isolates voices and minimizes background noise. Its compact design fits seamlessly into any modern workspace, while Ethernet connectivity ensures stable, high-fidelity sound transmission. Whether you're hosting a boardroom presentation or a global team call, the G7500 microphone integrates effortlessly with platforms like Zoom and Microsoft Teams, making collaboration smooth and professional. Experience the future of conferencing with a device that’s engineered for precision, reliability, and style..Designed specifically for the Poly Studio X30, this inverted VESA/wall mount provides a secure and professional mounting solution for streamlined video conferencing setups..Includes the Poly Inverted VESA / Wall Mount as a standalone accessory, ideal for enhancing the installation flexibility of your Studio X30 system..Compact and lightweight, the mount is engineered to fit the Studio X30 precisely, ensuring a clean and unobtrusive installation.

The RKLCDBK Universal VESA LCD Monitor Mounting Bracket for 19in Rack or Cabinet lets you mount almost any retail LCD or Touch screen panel into a server/storage rack/cabinet..Size: 7"(H) x 17" - 19 1/2"(W) x 4.2"(D).Color: Black.Adjustable 100 mm and 75 mm VESA mounting hole pattern for greater compatibility and control.Adjustable depth between 0 to 3.5 inches at an increment of .25 of an inch.Constructed from solid steel at 2.0 mm thick, this bracket is designed for durability.Ideal for installing a retail LCD monitor into an existing Rack or Cabinet solution.Use for uptime/process monitoring with big screens over 19" when mounted outwards.Material: Steel.Installing a touch screen display into a rack or cabinet.Mounting an LCD monitor or TV to the wall.Includes: 1 x LCD mounting bracket (two sides, one back), 1 x pack assembly screws (4 ea truss head, washers, flat head), 8 x LCD mounting Screws.Certifiations and standards: ANSI/EIA RS 310 D standards.Weight: 3.8 lbs..Warranty: Lifetime limited.Universal VESA LCD monitor mounting bracket for 19" rack or cabinet is constructed from solid steel at 2 mm thick and is designed for durability.

Raise your monitor to a comfortable viewing height with this monitor bracket.Compatible with: VESA mounting patterns.3-year manufacturer limited warranty

The StarTech® WALLMOUNT8 wall-mounting bracket provides 8U of space for mounting shallow rack-mount equipment that is 12" deep. This accessory in black, is made of solid steel and offers hassle-free installation. It optimizes your working space by efficiently mounting your equipment on your wall instead of taking up desk space or other usable surface areas..Wall mounting bracket provides 8U of space for mounting shallow rack-mount equipment that's 12" deep or less to the wall.Dimensions: 14.3"H x 20.5"W x 13.7"D (product), 14.3"H x 20.5"W x 12"D (external), 13.5"H x 17.7"W (internal).Black steel.Frame type: Open frame.Rack type: 2-post.Maximum weight capacity: 80.2 lbs..Improve efficiency in your office or server room by mounting shallow equipment to the wall.Sturdy installation of mission critical equipment with solid steel design.Hassle-free setup with wall mounting holes spaced 16" apart, matching standard dry-wall framework.Rear access panel for cable management.Includes 1 x wall-mount bracket, 24 x M5 cage nuts, 24 x M5 screws with washers, 1 x M6 K-nut, 6 x wood screws, 1 x instruction manual.RoHS compliant.Weight: 17.8 lbs..Comes with lifetime warranty

Maximize your workspace flexibility with the Ergotron Track Mount Bracket Kit, designed to securely attach monitor arms, pivots, CPU holders, and utility shelves to wall track systems. Built from durable aluminum and finished in clean white, this bracket is compatible with LX, MX, 400, 200, and 100 Series products, as well as the Universal CPU Holder and Utility Shelf. Its slide-in design ensures quick installation, while adjustable set-screws allow precise height positioning. Weighing just 0.7 lbs., it’s lightweight yet strong enough to support your setup reliably. Ideal for professional environments where space-saving and modularity matter most..Built for mounting arms, pivots, CPU holders, and utility shelves on wall track.Compatible with LX, HX, MX, 400, 200, and 100 Series arms and pivots.Height adjustment enabled via set-screws for flexible positioning.Crafted from solid aluminum with a sleek silver finish.Slides smoothly into track; no articulation or viewing angles applicable.Designed without drawers, bays, or shelves for streamlined use.Weighs only 0.7 lbs., making it lightweight and easy to install.5-year limited warranty..Secures components using standard track-mount bracket design

Custom VCM Interface Brackets are designed for your specific projector for a fast and easy install. Custom hardware also included..Device Supported: Projector.Limited Warranty: 10 Year.Color: Black

StarTech.com® Vertical wall mount equipment rack bracket is compatible with network device, power strip, patch panel. 5.9" x 19.8" x 4.1" Rack bracket constructed with solid steel is ideal for mounting on virtually on a wall or horizontally under a desk to save space..Capacity: 125.3 lbs..Compatibility: Network device, power strip, patch panel.Dimensions: 5.9"(H) x 19.8"(W) x 4.1"(D).Frame type: Open frame.Wall mountable: Yes.Wall mounting holes are 16" center to center for greater stability, and mounting into standard wall studs.Equipment can be vertically wall mounted, or horizontally under a desk.Rack size: 19".Rack units: 2U.StarTech.com® Vertical wall mount equipment rack bracket measuring 5.9" x 19.8" x 4.1" offers space-savings for environments lacking the footprint space for a full size server equipment rack.

The ASUS MKT02 Mini PC Kit is a monitor mounting solution with VESA 100x100mm compatibility for select ASUS monitors. It is designed for those who need to mount mini PCs onto monitors to make their desktop space clutter-free for a clean and tidy look..This is a VESA-compatible mini-PC mounting kit designed to attach Asus mini-PCs to the back of compatible Asus monitors, helping to create a clean, clutter-free desktop setup.The kit supports a wide range of Asus monitors, including models from the BE, PA, and VA series, typically ranging from 23.8 to 27 inches.Designed solely for securing a mini-PC to the back of a monitor.The mounting kit is black in color and made from durable metal for long-lasting support.Supports the VESA 100x100mm mounting pattern, compatible with select Asus monitors.Dimensions H 4.80” x W 8.28” x D 1.47” & Weight 0.64 lbs

The 2U 14" deep wall mounting bracket for patch panels delivers a sturdy and dependable equipment storage option, allowing you to wall mount data/IT equipment for a more efficient and accessible operating environment. It's the perfect solution for areas where space is at a premium like SoHo (small office, home office) environment, or space limited server room because it doesn't take any floor space. The mounting bracket features an all-steel design and is suitable for mounting patch panels, or other slim 19in equipment to a wall, and to organize cabling or equipment in your network closet, wiring closet, back office, or IDF. The sturdy steel construction is especially helpful for durability and stability. Also, because The open frame wall rack's mounting holes are positioned 16in. apart, allowing you a simple and secure wall-stud anchoring to your existing construction framework. M6 square cage nuts and M6 screws are included with the wall-mount bracket, additionally, M5x25 mounting screws are included to save you the hassle of sourcing separate mounting hardware. The RACK-2U-14-BRACKET is backed by a StarTech.com lifetime warranty and free lifetime technical support..2U WALL MOUNT RACK: This 19-inch wide low profile wall mounted rack has a maximum mounting depth of 14 in (35 cm), recommended for networking equipment up to 12 in deep, leaving 2 in for cable routing; Maximum weight capacity of 77 lbs. (35 kg).EASY TO INSTALL: The 2U wall-mounting patch panel bracket ships fully assembled and comes complete with M6 screws and M6 square cage nuts for easier equipment installation & includes wall mounting hardware; Predrilled wall mounting holes spaced 16" apart.COLD-ROLLED STEEL CONSTRUCTION: The wall mounting rack features a 1/16 in (1.5 mm) thick solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution.EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable opening slot for in-wall cable routing in your network closet, server room, wiring closet, classroom.Durable wall mount rack made of cold rolled steel.STARTECH.COM ADVANTAGE: IT professionals choice for over 30 years; This 2U wall mount rack backed for life by StarTech.com, including free 24/5 North America based multi-lingual tech support.Mount equipment that is up to 14 inches deep, such as patch panels or network switches, to your wall

Raise your monitor to a comfortable viewing height with this monitor bracket.Comes in black.Compatible with: VESA mounting patterns

Product Type: Mounting kit, wall-mountable.Mounting Components: Wall arm, mounting base, VESA adapter, extension arm bracket.Tilt: Yes.Pan: Yes.Weight: 1102 lbs.Recommended Use: LCD display.Recommended Display Size: 42".Flat Panel Mount Interface: 100 x 100 mm, 75 x 75 mm, 200 x 200 mm, 200 x 100 mm.Max Load Weight: 25 lbs.Material: Aluminum.Color: Polished aluminum.Manufacturer Warranty: 5 years warranty

Mount your Micro or Thin Client between a monitor and an arm using the Dual VESA Mount. The mount also comes with an enclosure to house power adapter. It provides ultimate adjustability and the best experience when used with a touch monitor in workspaces such as a kiosk or a retail endpoint..Raise your monitor to a comfortable viewing height with this monitor mounting kit.Comes in black.This bay organize essentials such as pens, clips, etc..Meets or exceed VESA standard

Weight (Approximate): 1.25 lb.Height: 8".Width: 4"

StarTech.com® Vertical wall mount equipment rack bracket is compatible with network device, power strip, patch panel. 5.9" x 19.8" x 2.4" Rack bracket constructed with solid steel is ideal for mounting on virtually any wall/ceiling surface..Capacity: 125.3 lbs..Compatibility: Network device, power strip, patch panel.Dimensions: 5.9"(H) x 19.8"(W) x 2.4"(D).Frame type: Open frame.Wall mountable: Yes.Rack size: 19".Rack units: 1U.StarTech.com® Vertical wall mount equipment rack bracket measuring 5.9" x 19.8" x 2.4" offers space-savings for environments lacking the footprint space for a full size server equipment rack.

The 4XEM's 4U 19" wall-mounted open rack provides a durable and solid design. The 4XEM 4U open wall-mountable bracket features heavy gauge material to ensure a stable installation platform. The universal standard design is compatible with 19" equipment from popular manufacturers. The 4U open bracket also provides a swing hinge to allow for easy installation of equipment and cabling. It is designed specifically for small businesses, home offices, restaurants, classrooms, and IT professionals..Wall-mounted open bracket in 4U form factor is designed specifically for small business, home offices, restaurants, classrooms, and IT professionals.Dimensions: 7.06"H x 19.72"W x 12.01"D.Made of SPCC cold-rolled steel, comes in black.Meets or exceeds EIA/ECA-310-E standards.Fits 19" equipment from popular manufacturers.Keeps all networking gear organized.Saves space and permits easy access for maintenance.Swing hinge.Cable entry on both sides and rear of rack.Weight capacity: 77.16 lbs..Mounting hole types: square (for cage nut).Weight: 7.5 lbs..Fully assembled.Package contains: a wall-mount rack, 12 M6 screws/washers/nuts, and four wall anchors (concrete).1-year manufacturer limited warranty

StarTech 2.5in SATA Hard Drive to 3.5in Drive Bay Mounting Kit.Hard drive accessory type: SATA.Drive connectors: 1 x SATA data and power combo (7 + 15 pin) receptacle.Host connectors: 1 x LP4 (4 pin - Molex large drive power) male, 1 x SATA (7 pin - data) receptacle.2 1/2" SATA hard drive in a 3 1/2" drive bay.A metal mounting bracket ensures the drive is reliably secure and provides heat dissipation from the drive.Features a sturdy aluminum bracket as well as a combined SATA cable which helps simplify installation and reduce clutter within the computer case.Device supported: Hard disk drive.Compatibility: PC.Green compliance certificate/authority: RoHS.Material: Aluminum.Package contents: 3 1/2" mounting bracket, data/power adapter cable, screw kit.2 years warranty.Bay provided: 1 x 2 1/2" internal, bay required: 1 x 3 1/2" internal.StarTech.com Drive Bay Mounting Kit - Secure Your Internal Hard Drive

Bought a bigger TV but don't want to buy another TV mount? This Mount-It! adapter kit is designed to convert 200 x 200mm VESA patterns to 400 x 200mm and 400 x 400mm. It also converts 100 x 100mm to 200 x 200mm and 300 x 300mm. This adapter kit is very easy to install: just attach your existing VESA plate onto this VESA adapter kit, then connect it to your TV. Installs in minutes. Includes installation instructions and standard hardware kit..Mount adapter kit is designed to allow your current mount to fit larger monitors or TVs.Weight capacity: 66 lbs.; VESA compatible.Made of heavy-gauge steel and comes in black.Fits screens up to 55".Converts VESA patterns from 200 x 200mm to 400 x 200mm and 400 x 400mm, as well as from 100 x 100mm to 200 x 200mm and 300 x 300mm.Kit includes eight bolts for attachment.Supported by manufacturer's limited lifetime warranty

Versatility meets affordability with the 2EZCLAMP. The solid articulating monitor arm featuring 90 tilt, 180 swivel, 360 rotation helps create unrivaled ergonomic experience and productivity. The individual VESA Plate height adjustment is designed to enable dual monitors to be perfectly aligned. When updating the monitors, the detachable VESA plate enables a quick and easy attachment. The 2EZCLAMP clears up valuable desk space removing unwanted clutter..Raise your monitor to a comfortable viewing height with this monitor mounting kit.Supports up to 32" monitors for versatile use.Comes in black and made of steel.-45 to 45 degree tilt and -180 to 180-degree rotation adjustment options enable optimal viewing.Two bays organize essentials such as pens, clips, etc..Weighs 17.64 lbs..Dimensions: 35.16"H x 19.6"W x 5"D.Compatible with: VESA 100 x 100mm mounting patterns.3-year manufacturer limited warranty

Use this Barco Wall Mounting Kit to install your ClickShare conferencing system. This multipurpose kit is perfect for easily attaching your network accessories without calling in a professional. Compatible with the ClickShare C-5, C-10, CX-20, and CX-30, the compact kit weighs less than 1 ounce..For ClickShare C-5, C-10, CX-20 & CX-30.No Need for Professional Assistance.Weighs Just Under 1 oz.Mounts Networking Accessories Easily

The Poly Edge Series wall mount bracket allows users to mount their Poly Edge E400, E450, E500, E550 IP phone vertically..Wall mount bracket allows users to mount IP phone vertically.Compatible with Poly Edge E400, E450, E500, E550.Sold as Each

Aruba campus AP mount bracket kit (10-pack) type B: suspended ceiling rail, flat 15/16. The new AP mounts decrease the gap between the AP and ceiling/wall and work easily with side entry Ethernet cables..Campus AP mount bracket kit (type B: suspended ceiling rail, flat 15/16").Used on 15/16" Suprafine or "Tee Systems" and compatible with Aruba AP-5xx series and newer access points.Dimensions: 1.5"H x 0.94"W.Metal construction ensures that heat and discoloration will not be an issue.10 mount bracket kits per pack

The Huddly Camera Mounting Bracket is made specially to fit the Huddly IQ and Huddly GO cameras perfectly on the top or bottom of the conference screen display. With the bracket, the Huddly cameras will fit any screen..Under the monitor camera mounting bracket.Clamps to Top or Bottom of your Display.Integrated Rubber Gripping Pads.Tiltable from 0 to 90°

Wall mount kit for Poly CCX 400 Phone.Allows for mounting on a wall or secure to a desk.Aligns with standard Telco wall jack plates

Bought a bigger TV but don't want to buy another TV mount? This Mount-It! adapter kit is designed to convert 75 x 75mm and 100 x 100mm VESA patterns to 200 x 100mm and 200 x 200 mm. This adapter kit is very easy to install: just attach this VESA adapter kit to your existing VESA plate, then connect it to your TV. Installs in minutes. Includes installation instructions and a standard hardware kit..Mount adapter kit designed to allow your current mount to fit larger monitors or TVs.Weight capacity: 66 lbs.; VESA compatible.Made of heavy-gauge steel and comes in black.Features versatile design with two mounting options.Converts VESA patterns from 75 x 75mm and 100 x 100mm to 200 x 200mm and 200 x 100mm.All hardware included.Supported by manufacturer's limited lifetime warranty

Startech® 1 Rack rackmount bracket is designed for simple installation and maximum server/KVM rack space-efficiency. Bracket includes a cable support bracket that reduces stress on KVM cables and switch connectors..Color: Black.Rack-mount brackets include a cable support bracket that reduces stress on KVM cables and switch connectors.Compatibility: SV431H KVM switch, SV431D KVM switch.Easy to install.Saves space by rackmounting equipment.2 years limited warranty.Startech® 1 Rack rackmount bracket offer a space-saving solution for our SV431/SV431D rack mount KVM switches.

This StarTech.com equipment rack bracket lets you attach your 3U rack mount equipment to a wall so that you don't have to worry about storing it in your server racks. It can hold a total of 125.3 pounds thanks to its two-post construction, and it comes with all the screws you need for easy installation..Dimensions: 5.9inch(H) x 19.8inch(W) x 5.9inch(D).Weight capacity: 125.3 lbs..Arrives fully assembled with cage screws and nuts for mounting equipment into the rack.Equipment can be vertically wall mounted, or horizontally under a desk.Compatible with most 19inch rack mountable equipmen.Rack type: 2 post.U height: 3U.Frame type: Open frame.Front door type: Open.Wall mountable.Industry standards: EIA RS310-C.Compatibility: Network device, power strip, patch panel.Package contents: Vertical wall mount bracket, cage nuts and screws, self tapping wood screws - 3/16inch x 1 1/2inch.Weight: 33.2 oz.Warranty: Lifetime limited.StarTech.com Equipment Rack Bracket - Attach Your 3U Equipment with Ease

Bought a bigger TV but don't want to buy another TV mount? This Mount-It! adapter kit is designed to convert 200 x 200mm VESA patterns to 300 x 300mm and 400 x 400mm. This adapter kit is very easy to install: just attach your existing VESA plate onto this VESA adapter kit, then connect it to your TV. Installs in minutes. Includes installation instructions and standard hardware kit..Mount adapter kit is designed to allow your current mount to fit larger monitors or TVs.Weight capacity: 66 lbs.; VESA compatible.Made of heavy-gauge steel and comes in black.Fits screens up to 55".Converts VESA patterns from 200 x 200mm to 300 x 300mm and 400 x 400mm.Kit includes eight bolts for attachment.Supported by manufacturer's limited lifetime warranty

Enjoy optimum sound quality by mounting your soundbar on the wall or directly to your TV. Mounting this bracket set either to the top or bottom of your TV allows you to swivel your soundbar with the TV, making it perfect for those awkward mounting locations. The two-in-one design allows you to remove the arms, creating a low-profile wall mount if preferred. Compatible with most TVs with standard VESA patterns and 3.5"-6.1"D soundbars..Two-piece bracket set helps you mount your soundbar on the wall or directly to your TV.Bracket dimensions: 3.13"-17.2"H x 1.5"W x 3.5"-6.1"D.Fits most TVs with standard VESA patterns and holds up to 33 lbs. per bracket.Made of steel in black.Three easy installation options: on the wall, on the top of TV, or on the bottom of TV for seamless integration.Enhance your sound by swiveling your soundbar with your TV for a fully balanced sound.Adjustable arms perfectly fit 3.5"-6.1"D soundbars.Lifetime manufacturer limited warranty

The 4XEM's 2U 19" wall-mounted open rack provides a durable and solid design. The 4XEM 2U open wall-mountable bracket features heavy gauge material to ensure a stable installation platform. The universal standard design is compatible with 19" equipment from popular manufacturers. The 2U open bracket also provides a swing hinge to allow for easy installation of equipment and cabling. It is designed specifically for small businesses, home offices, restaurants, classrooms, and IT professionals..Wall-mounted open bracket in 2U form factor is designed specifically for small business, home offices, restaurants, classrooms, and IT professionals.Dimensions: 3.56"H x 19.72"W x 12.01"D.Made of SPCC cold-rolled steel, comes in black.Meets or exceeds EIA/ECA-310-E standards.Fits 19" equipment from popular manufacturers.Keeps all networking gear organized.Saves space and permits easy access for maintenance.Swing hinge.Cable entry on both sides and rear of rack.Weight capacity: 77.16 lbs..Mounting hole types: square (for cage nut).Weight: 3.97 lbs..Fully assembled.Package contains: a wall-mount rack, 12 M6 screws/washers/nuts, and four wall anchors (concrete).1-year manufacturer limited warranty

The HP Poly Studio X52 Adapter Bracket for Studio X50 Wall or VESA Mount allows you to mount your X52 on an X50 Wall or VESA mount. With this adapter, there is no reason to procure an entirely new mount for your X52. Use this adapter when you have a perfectly suitable X50 mount. Use this adapter and you can securely mount your X52 onto an X50 mount, so you don't have to swap out your mounting bracket..Adapter Bracket securely mounts the Poly Studio X52 video bar for professional video conferencing setups..It supports both wall mounting and VESA-compatible installations..With this adapter, there is no reason to procure an entirely new mount for your X52.

StarTech Front Bay Bracket Adapter, (BRACKETFDBK).Color: Black.Bay provided: 1 x 3 1/2" x 1/3 (H) internal.Bay required: 1 x 5 1/4" x 1/2 (H) front accessible.Mount almost any 3 1/2" device into a standard 5 1/4" front bay.Device supported: Hard disk drive.Compatibility: 3 1/2" floppy drives.3 1/2" front bay cut out.Green compliance certificate/authority: RoHS.Includes mounting screws.Material: Plastic.Package contents: Front bay adapter bracket, mounting screws.2 years warranty.2 years warranty.StarTech.com Bracket Adapter - Utilize Your Available Front Bay Space