Dell Mounting Kits
6 results
Mount your Micro or Thin Client between a monitor and an arm using the Dual VESA Mount. The mount also comes with an enclosure to house power adapter. It provides ultimate adjustability and the best experience when used with a touch monitor in workspaces such as a kiosk or a retail endpoint..Raise your monitor to a comfortable viewing height with this monitor mounting kit.Comes in black.This bay organize essentials such as pens, clips, etc..Meets or exceed VESA standard
Raise your monitor to a comfortable viewing height with this monitor bracket.Compatible with: VESA mounting patterns.3-year manufacturer limited warranty
Raise your monitor to a comfortable viewing height with this monitor bracket.Comes in black.Compatible with: VESA mounting patterns
The Dell ReadyRails Sliding Rail Kit (770-BBJS) provides a reliable mounting solution for Dell PowerEdge 1U servers. Designed for tool-less installation in square and unthreaded round holes, and tooled installation in 4-post threaded racks, this kit ensures quick setup and secure support. The sliding rails allow easy access to the server for maintenance without full removal, improving efficiency in data center environments. Constructed in durable silver finish, the kit delivers long-lasting performance while maintaining compatibility with industry-standard racks. With a lightweight design and precise engineering, it supports Dell PowerEdge models such as R310, R410, R415, R430, R630, and R640. Backed by Dell’s 1-Year Hardware Warranty, the ReadyRails Sliding Rail Kit offers dependable rack integration, streamlined installation, and convenient server management..Rack rail for mounting and servicing Dell 1U servers..Designed for rack mount in 4‑post EIA‑310 standard racks..Fits 19 in racks; for 1U chassis; kit weight approx. 6 lb..Sliding rails, mounting hardware, and installation guide..Tool‑less in square/round holes; tooled in threaded racks; smooth sliding access..Dell PowerEdge R310, R410, R415, R430, R630, R640..Dell 1‑Year Hardware Warranty..EIA‑310 rack standard compliant.
Fitting a 19 to 38" monitor, this arm supports weights up to 22 pounds. The 100 x 100mm VESA mount allows for easy installation, while the flexible design lets you swivel and rotate your monitor 180° and tilt it from -35° to 80° for the perfect viewing angle. Or, raise or lower the display up to 10.5". Integrated cable management allows you to stash cables for a tidy workstation, while grommet and desk clamp support facilitate easy deployment. Breeze through installation with a Quick Release mechanism that lets you snap a Dell UltraSharp or P-series monitor onto the arm without any tools..This is a single adjustable desk-mounted monitor arm designed for LCD displays, ideal for professional workspaces; includes a VESA adapter plate, Allen key, and documentation for easy setup.Supports one monitor ranging from 19" to 38", making it suitable for standard and ultrawide displays.The arm offers a vertical lift range of 10.5", allowing ergonomic height adjustments for optimal viewing comfort.Finished in black, the arm is constructed from durable metal and plastic components for long-lasting use.Features full articulation with pivot ±90°, tilt from -35° to +80°, rotation ±90°, and swivel up to 360°, offering flexible viewing angles and positioning.Dimensions: Height 22”, Width 15.8”, Depth 4.7” & Weight: 8.95 lbs.Compatible with 100x100mm VESA mounting interface, and includes Dell Quick Release for tool-free monitor attachment.Bring fluid adjustment to your workstation with the MSA20 Single Monitor Arm from Dell.
Quickly install this Dell dual monitor arm - MDA20 for a comprehensive monitor and system mounting solution. Dell Quick Release lets you snap on the Dell UltraSharp and P-Series monitors onto the arm easily without tools, and select OptiPlex Micro, Ultra and Wyse systems can be installed as well for an all-in-one solution. Virtually tool-free installation makes deploying the Dell dual monitor arm simple, while the counterbalance indicator on the side lets you replicate identical tension settings across multiple units rapidly. You can install other monitors with optional VESA mount adapter plates for complete versatility with select PC systems..Dual monitor arm is built to minimize wasted space behind the arms so that you get plenty of usable area.Supports 19"-27" monitors weighing between 4.8 to 22.0 lbs..C-clamp is perfect for desk edges, while the grommet mount only needs a 2"Dia. hole to support monitors up to 27" in size.Comes powder-coated in black.Height, tilt, pivot, depth, and swivel adjustments make it easy to move the monitors individually on this dual-monitor arm precisely to your preferred monitor setup.Weight is 19 lbs..Dimensions: 8.27"H x 22.04"W x 15.75"D.VESA mounting pattern: 100 x 100mm.Comes with the World's first swivel switch that allows you to change the swivel angle without having to remove any part of the monitor arm.Simply adjust the swivel angle on the arm to 180 or 360 degrees conveniently with a flip of the switch.Virtually tool-free installation makes deploying simple, while the counterbalance indicator on the side lets you replicate identical tension settings across multiple units rapidly.You can install other monitors with optional VESA mount adapter plates for complete versatility with select PC systems.Ample space in the cable management slot with cable clips keep up to 10 wires in place, offering a clean desk experience.This monitor arm also has an Allen key that is conveniently tucked underneath the arm cover so that you will not lose it.Package includes: dual-monitor arm, Dell VESA adapter plate, Allen key, and documentation.3-year manufacturer limited warranty
You May Also Like
Space saving, the Dell Dual Monitor Stand - MDS19 mounts up to two 27-inch monitors, providing the screen real estate you need to be most productive. The dual monitor stand frees up the workspace in front of you for writing and referencing. The round cable management slot neatly channels cables within its stand, routing them along the curved bar with cable clips keeping the cables intact and hidden from view. Each monitor panel is fully adjustable, allowing you to set the height, tilt, pivot, and swivel to suit your viewing comfort. The stand's tool-free installation feature makes it easy to securely snap Dell UltraSharp and P-series monitors with Quick Release into place without the need for screws. It also supports Dell E-series monitors and other 19" to 27" 100 mm x 100 mm standard VESA compatible monitors..Raise your monitor to a comfortable viewing height with this monitor stand.Supports up to 27" monitors for versatile use.Comes in black.-5 to 24 degree tilt and -90 to 90-degree rotation adjustment options enable optimal viewing.Two bays organize essentials such as pens, clips, etc..Dimensions: 22.7"W x 9.8"D.Meets or exceed VESA standard.Rubber feet protect desk surface
Looking for a heavy duty, double C-clamp base VESA compatible monitor stand? Then the MI-751 is your answer. This single monitor desk stand can tilt 90 degrees up and down in either direction, swivel a full 360 degrees left and right, and you can height adjust your screen on the 17.5" inch pole. The display can be rotated into portrait or landscape orientation and will hold in place..Single LCD monitor desk stand for 17"-27" monitors.Full motion articulating arms. Rotate 360, Swivel 360, Tilt +-15.Dual C-clamp fits .79" to 2.36" thick desks.Supported by manufacturer's limited lifetime warranty.Mount-It! Single Monitor Arm Mount Desk Stand | Full Motion Height Adjustable | Fits 19-32 Inch VESA 75 100 Screens
Mount-It! MI-2752 is a dual monitor mount that raises your monitors to an ergonomic position to help you work more efficiently. Designed for performance, this mount is made from high-strength steel for durability and includes both clamp and grommet installation components to fit a variety of desktops. The arms can be raised and lowered on the pole for easy height adjustment. Tilt your screen at 90 degrees up and down or swivel it at 180 degrees up and down to find your most comfortable reading, and integrated cable management keeps your cords off your desktop. All necessary instructions and hardware included..ERGONOMIC DUAL MONITOR MOUNT: Raise your monitors/screens to the optimal viewing height to reduce neck stain and back stiffness. Cable management clips keep your desk neat organized..FULLY ADJUSTABLE: Mount arms can tilt up and down 90 degrees, swivel left and right 180 degrees, raise and lower 17" inches (the height of pole), and each screen can be rotated and placed in portrait or landscape orientation independent of one another.WIDELY COMPATIBLE: Works with screens from 17" to 32" in size and works with the standard 75x75mm or 100x100m VESA square bolt hole patterns.EASY INSTALLATION: 2-monitor stand comes with all mounting hardware, tools, and instructions necessary for assembly. The detachable VESA plates make mounting a breeze and can be adjusted up to 1” to perfectly align the height of monitors. Includes interchangeable C-clamp mount (works with desks up to 4" in width) and grommet base mount (works with desks up to 3.25" in width).Supported by manufacturer's lifetime limited warranty.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..The MI-2752 dual monitor arm mount helps you increase productivity and clear up extra space on your desk
Maximize your available work area with a single-footprint solution. Simply attach the bracket to the back of your monitor's stand, and your PC platform to the bracket. It's that easy. Attach your HP Workstation, HP Desktop Mini, HP Chromebox or select HP Thin Client directly behind select HP P series monitors with the HP B250 PC mounting bracket..Simply attach the bracket to the back of your monitor's stand, and your PC platform to the bracket.Compatible with HP Workstation, HP Desktop Mini, HP Chromebox or select HP Thin Client.Dimensions: 2.24"H x 4.53"W x 7.14"D.Comes in black.Box contains: mounting bracket; 700 mm DisplayPort cable; 4 x 6 mm screws; 4 x 10 mm screws; TR screws; quick installation guide
The HP® B300 Series 2DW53AA mounting bracket in black, is compatible with HP EliteDisplay E233 monitor, computer, thin client, desktop mini, Chromebox and workstation. It maximizes the available work area with a single footprint solution. The bracket simply attaches to the back of the display's stand and the PC platform. With short USB A to B and DisplayPort cables it reduces cable clutter..PC mounting bracket is perfect to attach with computer, thin client, desktop mini, Chromebox and workstation.Dimensions: 2.04"H x 9.69"W x 4.52"D.Comes in black color.Compatibility: HP EliteDisplay E233, computer, thin client, desktop mini, Chromebox and workstation.VESA mount: 100 x 100 mm.Maximizes the available work area with a single footprint solution.Simply attach the bracket to the back of your displays stand and the PC platform to the bracket.Reduces the cable clutter with short USB A to B and DisplayPort cables.Comes with bracket that doesn't interfere with the monitors height adjustment, tilt, swivel or pivot settings.Includes 700 mm DisplayPort cable, 700 mm USB A to B cable, 4 x 6 mm screws, 4 x 10 mm screws and quick installation guide.Weight: 0.7 lbs..Comes with 1 year limited warranty
The ThinkCentre Tiny VESA Mount II is a unique design specific to house the Tiny PC while featuring the universal VESA mount configuration. The VESA standard enables this mount to attach to anything that is VESA compatible for the utmost in mounting flexibility. This versatile mounting device can be used separately or combined with other options for secure mounting functionality. The ThinkCentre Tiny VESA Mount is a required component for the following ThinkCentre Tiny options.Device Supported: Desktop Computer, Workstation.Color: Black.ThinkCentre Tiny VESA Mount II
This sit/stand desk mounted workstation turns an existing desk into a more active workspace quickly, with easy installation using a C-clamp or grommet base. Experience a more comfortable way to work throughout the day by adjusting the full-motion fluid gas spring arm and the full-motion monitor mounts. This workstation features two USB 3.0 ports, for charging or data transfer, in the front of the mount, keeping CPU connection within reach and easy to access..Raise your monitor to a comfortable viewing height with this dual-monitor sit/stand desk mount.Supports most flat-panel monitors up to 27" for versatile use.Height adjusts from 23.1" to 42.9" for comfortable viewing.Made of steel and comes in black.10-degree tilt and 180-degree rotation adjustment options enable optimal viewing.Features an attached ergonomic keyboard tray, phone slot, and storage space for office supplies.Weight capacity: 13.2 lbs. per monitor.Dimensions: 23.1"-42.9"H x 26"W x 36.5"-40.7"D.Compatible with VESA 75 x 75mm, 100 x 100mm mounting patterns.Two integrated USB 3.0 ports on the front of the mount, keeping the connection within reach.Attaches to an existing desk using either the C-clamp or grommet base.180-degree rotation allows the monitors to be oriented vertically or horizontally.Supported by manufacturer's limited lifetime warranty
The RACK-10U-14-BRACKET 10U 13.78 in. Deep Wall Mounting Bracket for Patch Panel delivers a sturdy and dependable equipment storage option, allowing you to wallmount equipment for a more efficient and accessible operating environment. The mounting bracket features an all-steel design and is suitable for mounting patch panels, or other slim 19in equipment to a wall..StarTech.com 10U Wall Mount Network Rack, 14 in Deep (Low Profile), 19" Patch Panel Bracket for Shallow Server.This 19 inch wide low profile wall mounted rack has a maximum mounting depth of 14 in [35 cm]..The 10U wall mounting patch panel bracket ships fully assembled and comes complete with M6 Screws and M6 Cage Nuts.The wall mounting data rack features a solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution.Built with efficiency in mind, the small wall mount patch panel bracket has rear cable routing access for easy cable organization in your network closet, server room.Color come Black.Material Alloy Steel
The HPE S4K79A memory module is a 32GB DDR4 RDIMM, operating at a speed of 2933 MHz, with a CAS latency of 21-21-21. This module is dual-rank, which enhances memory bandwidth and improves overall system performance, especially in multi-threaded and high-demand workloads. The module is designed to operate at a low voltage of 1.2V, offering improved energy efficiency compared to previous generations of memory. Incorporating Error-Correcting Code (ECC) support, the HPE S4K79A helps detect and correct single-bit memory errors, ensuring that data integrity is maintained, which is crucial for preventing data corruption and minimizing system downtime in mission-critical applications. This memory module is tailored specifically for HPE ProLiant Gen10 and Gen10 Plus servers, providing seamless integration and ensuring optimal system performance. Whether you are running virtualized environments, large-scale databases, or enterprise applications, the HPE S4K79A memory module provides the reliability and speed needed to support the most demanding workloads. With high capacity, energy-efficient operation, and superior performance, the HPE S4K79A is an excellent choice for businesses looking to expand their server memory and improve their system's responsiveness and capacity for processing large data sets..The HPE S4K79A is a DDR4 Registered Memory Module (RDIMM) and is not a networking accessory. It is used to expand the memory capacity in HPE ProLiant Gen10 and Gen10 Plus servers for improved performance in enterprise computing environments..The HPE S4K79A is not related to antenna technology, so dBi (decibels relative to an isotropic radiator) is not applicable..The HPE S4K79A is compatible with HPE ProLiant Gen10 and Gen10 Plus servers, ensuring seamless integration and optimal performance when upgrading or expanding memory capacity in these systems..The physical dimensions of the HPE S4K79A memory module are not explicitly listed by the manufacturer, but typical DDR4 RDIMM modules measure approximately 133.35 mm x 30 mm (L x W)..The HPE S4K79A memory module is typically black in color and constructed from high-quality PCB (Printed Circuit Board) material with components such as DRAM chips and a heat spreader for thermal management..The HPE S4K79A is typically sold as a single 32GB module, and the selling quantity is 1 unit (UOM: each).
This LCD Monitor Pole with Double-Link Swing Arm provides a secure and elevated position for two flat-screen monitors to help free up valuable desk and work space. It's fully adjustable tilt, rotate, side-to-side, height, and tension settings enable a comfortable and productive viewing position that helps reduce eye fatigue, neck, and back strain. LCD monitors can be easily rotated around the pole to allow others to view presentations and other multimedia from almost any direction. Durable metal construction and a sturdy clamp provide a quick, easy, and secure mount to a desktop or other horizontal surface. Ready to install with included hardware, there's no need to drill holes into desks or countertops. Thus mount is made of high grade steel and aluminum. Fits most LCD monitors 13" to 27". Supports up to 22 lbs. per monitor. Every joint is able to be tightened, so you can adjust exactly how fluid/stationary you want everything, simply remove the cap on the joint and tighten the bolt underneath..Raise your monitor to a comfortable viewing height with this dual monitor desk mount.Supports up to 27" monitors for versatile use.Height-adjustable with two screws holding arms securely on pole.Sturdy aluminum construction features integrated clips and port for cable management.A +80/-80 degree tilt, 180-degree pan, and 360-degree rotation adjustment options enable for optimal viewing.Each arm securely holds up to 22 lbs. to fit most monitors (44 lbs. total load on height-adjustment assembly).Compatible with the standard VESA mounting patterns: 100 x 100 and 75 x 75.Meets VESA MIS-D mounting standard.Black finish completes overall aesthetic appeal.The C-clamp base has an integrated double lock to ensure stable mounting onto any surface up to 4" thick.Supported by manufacturer's limited lifetime warranty
The Huddly Camera Mounting Bracket is made specially to fit the Huddly IQ and Huddly GO cameras perfectly on the top or bottom of the conference screen display. With the bracket, the Huddly cameras will fit any screen..Under the monitor camera mounting bracket.Clamps to Top or Bottom of your Display.Integrated Rubber Gripping Pads.Tiltable from 0 to 90°
This Dell modular Thunderbolt dock comes with swappable modules for easy upgrades and SuperBoost technology for fast charging. You'll experience power delivery of up to 130W on Dell devices with ExpressCharge technology that enables 80% charge in one hour and 35% charge in just 20 minutes..Modular Thunderbolt dock with swappable modules for easy upgrades and SuperBoost technology for fast charging.Dimensions: 1.1"H x 8.1"W x 3.5"D.Contains USB, HDMI, DisplayPort, and Ethernet ports.Includes a security lock slot (cable lock sold separately).Features 2 x DisplayPort, 1 x HDMI, 1 x USB Type-C multifunctional DisplayPort, 3 x USB 3.2 Gen 1 Type-A, 2 x USB 3.2 Gen 2 Type-C, 1 x RJ45 ports.Swappable modules let you upgrade with ease to meet the needs of your IT environment.Upgrade to get the latest in connectivity with not one but two Thunderbolt 4 ports for even more flexibility.Connect displays and peripherals to your system with a single cable for enhanced productivity.Thunderbolt 4 dock with a high number of ports connects multiple 4K displays and Thunderbolt peripherals, allowing you to not compromise with your work setup; get the maximum from your peripherals with data transfer of 40GB/s.Offers wide compatibility across Dell commercial laptops; also compatible with laptops from other manufacturers that support industry standards for Thunderbolt docking.Compatible with Windows 10, Windows 11, Ubuntu 20.04 or later.Comes in black.3-year manufacturer limited warranty
The Dell WD22TB4 (M7YV8) is a powerful Thunderbolt 4 docking station designed to enhance productivity by expanding the connectivity options of Dell laptops. Delivering up to 180 watts of power, it can simultaneously charge laptops while connecting to multiple peripherals. With multiple video output options including DisplayPort 1.4 and HDMI 2.0, it supports versatile multi-monitor setups for a more immersive workspace. The dock features fast USB-C and USB-A ports for high-speed data transfer and peripheral connections, along with a Gigabit Ethernet port for stable wired networking. Ideal for professionals who need a reliable and efficient solution for expanding their laptop’s capabilities, the WD22TB4 streamlines your desk setup, minimizing cable clutter while maximizing device compatibility and power delivery..The docking station type is a Thunderbolt 4 docking station, compatible primarily with Dell laptops that support Thunderbolt 4 or USB-C with Thunderbolt technology..Dimensions provide a compact and space-saving design, suitable for desktop use without cluttering your workspace..Includes multiple connectors and interfaces such as 2 Thunderbolt 4 ports, 2 DisplayPort 1.4 ports, 1 HDMI 2.0 port, 1 USB-C 3.2 Gen 2 port, 3 USB-A 3.2 Gen 1 ports, and a Gigabit Ethernet (RJ45) port..Included with the dock is a Thunderbolt 4 cable that is typically around 0.8 meters in length, allowing flexible placement of the docking station on or near your desk..Has 1 HDMI port, 2 DisplayPort ports, and no VGA ports, providing high-quality digital video output options for multiple monitors..Comes with a limited warranty from Dell, generally covering 1 to 3 years depending on the region and purchase terms, ensuring reliable support and service.
Showcase documents with this frame, which measures 8.5 x 11 inches. This NuDell frame is ideal for both horizontal and vertical displays, and the face features unbreakable protective plastic for added durability..This frame can be used to display important awards, prestigious certificates, and more.Can be conveniently mounted on the wall for easy viewing.Dual frame orientation.Made of plastic with black finish and stylized gold accent trim.Holds one document or certificate.Certificate size: 8.5"W x 11"L.Features an unbreakable protective plastic face and cardboard back plate.⚠ ADVERTENCIA: Cáncer y Daños reproductivos -www.P65Warnings.ca.gov.⚠ WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov.Display documents easily by using this NuDell EZ Mount black with gold border document frame.
The 2U 14" deep wall mounting bracket for patch panels delivers a sturdy and dependable equipment storage option, allowing you to wall mount data/IT equipment for a more efficient and accessible operating environment. It's the perfect solution for areas where space is at a premium like SoHo (small office, home office) environment, or space limited server room because it doesn't take any floor space. The mounting bracket features an all-steel design and is suitable for mounting patch panels, or other slim 19in equipment to a wall, and to organize cabling or equipment in your network closet, wiring closet, back office, or IDF. The sturdy steel construction is especially helpful for durability and stability. Also, because The open frame wall rack's mounting holes are positioned 16in. apart, allowing you a simple and secure wall-stud anchoring to your existing construction framework. M6 square cage nuts and M6 screws are included with the wall-mount bracket, additionally, M5x25 mounting screws are included to save you the hassle of sourcing separate mounting hardware. The RACK-2U-14-BRACKET is backed by a StarTech.com lifetime warranty and free lifetime technical support..2U WALL MOUNT RACK: This 19-inch wide low profile wall mounted rack has a maximum mounting depth of 14 in (35 cm), recommended for networking equipment up to 12 in deep, leaving 2 in for cable routing; Maximum weight capacity of 77 lbs. (35 kg).EASY TO INSTALL: The 2U wall-mounting patch panel bracket ships fully assembled and comes complete with M6 screws and M6 square cage nuts for easier equipment installation & includes wall mounting hardware; Predrilled wall mounting holes spaced 16" apart.COLD-ROLLED STEEL CONSTRUCTION: The wall mounting rack features a 1/16 in (1.5 mm) thick solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution.EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable opening slot for in-wall cable routing in your network closet, server room, wiring closet, classroom.Durable wall mount rack made of cold rolled steel.STARTECH.COM ADVANTAGE: IT professionals choice for over 30 years; This 2U wall mount rack backed for life by StarTech.com, including free 24/5 North America based multi-lingual tech support.Mount equipment that is up to 14 inches deep, such as patch panels or network switches, to your wall
MI-9000 screen adapter kit will fit practically all LCD and LED/OLED monitor with a bezel height of 11.5 to 19.2 inches with thickness of up to 2.75 inches. These dimensions should be compatible with most monitors up to 30 inches in screen size. The versatile arms are designed to mate with any VESA monitor mounts with VESA 75x75 and 100x100 mm configurations. All the necessary hardware and installation instructions are included in the package..Compatible with most monitors up to 30 inches in screen size.VESA 75x75 and 100x100 mm configurations.Can safely carry up to 17.6 lbs. monitors.Supported by manufacturer's limited lifetime warranty.MI-9000 VESA adaptor attaches to your non-VESA compatible monitor and allows it to be connected to the industry-standard monitor desk mounts and stands.