Non-Flammable Gas Placards
3 results
This Full Frame Spacemaster System includes 8 placard panels in a single frame: Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable Liquid 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2, and Blank. These placards meet DOT specifications for transporting hazardous materials. Changing DOT placards when your load changes is as easy as the flip of a panel. Spacemaster eliminates the hassle and expense of replacing placards, so DOT compliance is virtually at your fingertips. Spacemaster frames are constructed of corrosion-resistant, fully formed rigid aluminum that provides superior durability, even under the toughest road conditions. Self-contained placard panels are constructed of aluminum alloy and mill roller-coated with white acrylic paint. Panels lock in place with 4 double-riveted stainless steel pressure fasteners. Legends are silkscreened with UV inks to retard fading, chipping or peeling. Spacemaster Full Frame, 8-Legend Flip Placard System for Trailers is sold per each..Placards included: Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable Liquid 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2, and Blank..Spacemaster eliminates the hassle and expense of replacing placards..Panels lock in place with 4 double-riveted stainless steel pressure fasteners..Spacemaster Full Frame, 8-Legend Flip Placard System for Trailers is sold per each..This Full Frame Spacemaster System includes 8 placard panels in a single frame: Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable Liquid 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2, and Blank.
This Split Frame Spacemaster System includes 8 placard panels in a single frame: Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable Liquid 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2, and Blank. These placards meet DOT specifications for transporting hazardous materials. Changing DOT placards when your load changes is as easy as the flip of a panel. Spacemaster eliminates the hassle and expense of replacing placards, so DOT compliance is virtually at your fingertips. Spacemaster frames are constructed of corrosion-resistant, fully formed rigid aluminum that provides superior durability, even under the toughest road conditions. Self-contained placard panels are constructed of aluminum alloy and mill roller-coated with white acrylic paint. Panels lock in place with 4 double-riveted stainless steel pressure fasteners. Legends are silkscreened with UV inks to retard fading, chipping or peeling. Spacemaster Split Frame, 8-Legend Flip Placard System for Trailers is sold per each..Include the following placards: Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable Liquid 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2, and Blank..Changing DOT placards when your load changes is as easy as the flip of a panel..Spacemaster eliminates the hassle and expense of replacing placards..Spacemaster Split Frame, 8-Legend Flip Placard System for Trailers is sold per each..This Split Frame Spacemaster System includes 8 placard panels in a single frame: Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable Liquid 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2, and Blank.
This White Split Frame Spacemaster System includes 8 placard panels in a single frame: Dangerous Flammable Gas 2 Poison 6 Corrosive 8 Flammable Liquid 3 Oxidizer 5.1 Radioactive 7 Non-Flammable Gas 2 Blank Placards meet DOT specifications for transporting hazardous materials. Changing DOT placards when your load changes is as easy as the flip of a panel. Spacemaster eliminates the hassle and expense of replacing placards, so DOT compliance is virtually at your fingertips. Spacemaster frames are constructed of corrosion-resistant, fully formed rigid aluminum that provides superior durability, even under the toughest road conditions. Self-contained placard panels are constructed of aluminum alloy and mill rollercoated with white acrylic paint. Panels lock in place with 4 double-riveted stainless steel pressure fasteners. Legends are silkscreened with UV inks to retard fading, chipping or peeling. Spacemaster White Split Frame, 8-Legend Flip Placard System for Trailers is sold per each..Spacemaster with the following placards: Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable Liquid 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2, and Blank Placards.superior durability, even under the toughest road conditions.sold per each.This White Split Frame Spacemaster System includes 8 placard panels in a single frame.
You May Also Like
For the ultimate in convenience, flexibility and time saving, Duo-Flip allows you to change both DOT placard legends and ID numbers in seconds to match your commodity. This Duo-Flip, Full Frame, 4-Legend Flip Placard System includes 5 placard panels in a single frame: Flammable Liquid 3, Combustible 3, Poison 6, Corrosive 8 and Blank. Self-contained, .032 aluminum alloy placard panels slide over easily on four aluminum hinges. Notches in the aluminum panels allow you to flip numerals without interference. Panels lock in place with four stainless steel pressure fasteners. Duo-Flip's exclusive, deep-formed aluminum frame provides stability and excellent wind protection. Equipped with extra sturdy mounting holes, standard full frames fit virtually any type of cargo tank..Includes the following hazard class placards: Flammable Liquid 3, Combustible 3, Poison 6, Corrosive 8 and Blank.The ultimate in convenience, flexibility and time saving.Fits virtually any type of cargo tank.Duo-Flip allows you to change both DOT placard legends and ID numbers in seconds to match your commodity
Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction. This slide-in placard holder features Easy-Off Ramp, an innovative device that glides placards over the retaining clip, so they slide in or out without a hitch. Built with rugged riveted assembly, drain hole and stainless steel clip, Slidemaster holders accommodate metal placards and non-adhesive placards in polycoated tagboard and 20-mil rigid vinyl. Full frame, Slidemaster Slide-In Placard Holder comes with baked-on white polyester finish on sturdy .032 aluminum..Top quality construction.Easy-Off Ramp, an innovative device that glides placards over the retaining clip.Slide-In Placard Holder comes with baked-on white polyester finish.White Slidemaster Placard Holder for Trucks
Extend the life and appearance of your placards with this economical Placard Holder Shield. Constructed of sturdy .030 extruded plastic, this shield helps protect metal, tagboard and rigid vinyl placards from falling or blowing out of their Slidemaster placard holders. The shield also helps to retard deterioration due to harsh weather, dirt and rough road conditions. Clear Plastic Placard Holder Shield is made with rounded corners that permit easy insertion in all Slidemaster Slide-In Placard Holders for trucks. Priced per each..Constructed of sturdy .030 extruded plastic.The shield also helps to retard deterioration due to harsh weather, dirt and rough road conditions..Priced per each..Extend the life and appearance of your placards with this economical Placard Holder Shield.
Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction. This slide-in placard holder features Easy-Off Ramp, an innovative device that glides placards over the retaining clip, so they slide in or out without a hitch. Built with rugged riveted assembly, drain hole and stainless steel clip, Slidemaster holders accommodate metal placards and non-adhesive placards in polycoated tagboard and 20-mil rigid vinyl. Featuring superior durability, this full frame, treated .032 anodized aluminum Slidemaster is weather resistant and retards oxidation..Slidemaster holders accommodate metal placards and non-adhesive placards in polycoated tagboard and 20-mil rigid vinyl.Featuring superior durability, this full frame, treated .032 anodized aluminum.Slidemaster is weather resistant and retards oxidation..Built with rugged riveted assembly, drain hole and stainless steel clip
Slidemaster Placard Holder, Mill, Full.Placard holder.Easily slide your placards into the Slidemaster.Sold per each.Slidemaster Placard Holder, Mill, Full
Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction. This slide-in placard holder features Easy-Off Ramp, an innovative device that glides placards over the retaining clip, so they slide in or out without a hitch. Built with rugged riveted assembly, drain hole and stainless steel clip, Slidemaster holders accommodate metal placards and non-adhesive placards in polycoated tagboard and 20-mil rigid vinyl. Split frame, Slidemaster Slide-In Placard Holder comes with baked-on white polyester finish on sturdy .032 aluminum. Split frame construction allows two parts of the Slidemaster frame to follow the action of 12" roll-up rear door panels without impediment. Split frame Slidemaster, DOT Placard System is priced per each..Built with rugged riveted assembly, drain hole and stainless steel clip.Split frame construction allows two parts of the Slidemaster frame to follow the action of 12" roll-up rear door panels without impediment.Split frame Slidemaster, DOT Placard System is priced per each..Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction.
Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction. This slide-in placard holder features Easy-Off Ramp, an innovative device that glides placards over the retaining clip, so they slide in or out without a hitch. Built with rugged riveted assembly, drain hole and stainless steel clip, Slidemaster holders accommodate metal placards and non-adhesive placards in polycoated tagboard and 20-mil rigid vinyl. Featuring superior durability, this split frame, treated .032 anodized aluminum Slidemaster is weather resistant and retards oxidation. Split frame construction allows two parts of the Slidemaster frame to follow the action of 12" roll-up rear door panels without impediment. Split frame Slidemaster, DOT Placard System is priced per each..Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction.Featuring superior durability, this split frame, treated .032 anodized aluminum.DOT Placard System is priced per each..Slidemaster is weather resistant and retards oxidation.
Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction. This slide-in placard holder features Easy-Off Ramp, an innovative device that glides placards over the retaining clip, so they slide in or out without a hitch. Built with rugged riveted assembly, drain hole and stainless steel clip, Slidemaster holders accommodate metal placards and non-adhesive placards in polycoated tagboard and 20-mil rigid vinyl. Split frame, Slidemaster Slide-In Placard Holder comes with a shiny brite mill metal finish on .032 aluminum. Split frame construction allows two parts of the Slidemaster frame to follow the action of 12" roll-up rear door panels without impediment. Split frame Slidemaster, DOT Placard System is priced per each..Easy-Off Ramp, an innovative device that glides placards over the retaining clip.Built with rugged riveted assembly.Priced per each.Slidemaster Placard Holder for Trucks
This wood presentation plaque presents the perfect way to display any 8.5x11 award certificate, diploma, photo, or other valuable document. It features a rich Mahogany Finish and includes a clear acrylic panel and four pieces of decorative hardware to protect the document. Pre-drilled hanging inserts allow for vertical or horizontal display. Includes a blank certificate of excellence which can be customized to recognize any service or achievement. Honor an exceptional employee, sales person, winning team or any individual or Department that deserves recognition for a job well done. Makes a lasting, impressive presentation.Presentation plaque presents the perfect way to display any 8.5x11 award certificate, diploma, photo, or other valuable document.Vertical or horizontal display.Rich mahogany finish.8.5 x 11" document size.Wood construction.Clear Acrylic panel protects documents from dust and debris.Mahogany finish wood award presentation plaque
The Poly Edge Series wall mount bracket allows users to mount their Poly Edge E400, E450, E500, E550 IP phone vertically..Wall mount bracket allows users to mount IP phone vertically.Compatible with Poly Edge E400, E450, E500, E550.Sold as Each
Ghent's Champion wall-mounted cases are the ideal choice when space is limited. Strong anodized aluminum framing houses tempered glass and comes complete with built-in locks. Interior bottom is solid white laminate..Ideal choice when space is limited..Anodized aluminum framing..Sliding tempered glass doors with built-in locks..Interior bottom - solid white laminate..Can be mounted next to each other to create an entire wall display..Limited Lifetime Warranty..Made in the USA..âš WARNING: This product can expose you to chemicals including Wood Dust, which are known to the State of California to cause cancer. For more information, visit www.P65Warnings.ca.gov
Showcase documents with this frame, which measures 8.5 x 11 inches. This NuDell frame is ideal for both horizontal and vertical displays, and the face features unbreakable protective plastic for added durability..This frame can be used to display important awards, prestigious certificates, and more.Can be conveniently mounted on the wall for easy viewing.Dual frame orientation.Made of plastic with black finish and stylized gold accent trim.Holds one document or certificate.Certificate size: 8.5"W x 11"L.Features an unbreakable protective plastic face and cardboard back plate.⚠ADVERTENCIA: Cáncer y Daños reproductivos -www.P65Warnings.ca.gov.⚠WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov.Display documents easily by using this NuDell EZ Mount black with gold border document frame.
Showcase proud accomplishments in your office, restaurant, or home by using this document frame. Mount this Victory Light document frame to a wall or use the easel leg to display it on a bookshelf or desk..Perfect solution for displaying your certificates, awards, or photos.Can be hanged on a wall or placed on a desk with its easel leg.Display horizontally or vertically to showcase your favorite photographs.Rosewood polystyrene frame provides protection for your document.Holds one document.Photo size: 8.5" x 11".Hang a beautiful certificate, award, or photograph in this Victory Light black and rosewood document frame.
Cost effective and versatile facility sign. Durable and distinctive sign holder design with silver and black accents. Anti-glare sheet protector keeps inserts clean and easy to read. Adapts for desktop, wall mount and partition wall use (mounting hardware included)..Cost effective and versatile facility sign..Anti-glare protective sheet is easy to slide in-slide out making sign changes a breeze..Features a blend of silver and black accents for a distinctive look..Versatile mounting options allow for tabletop, wall and fabric cubicle surfaces..Includes mounting hardware..Patented.8 1/2" x 2" upscale sign holder features a blend of silver and black accents creating a distinctive look.
Round floor sign that is a great way to convey a message while providing traction for safety simultaneously..Legend: STOP SOUND HORN PROCEED SLOWLY (text and symbol).Material: Vinyl.Language: English.Non-slip surface is pebble-textured for added durability to withstand heavy pedestrian traffic.Sign is sub-surface printed and overlaminated by a protective layer.Mark bold graphics and messages on floors and pathways.Round floor sign, 1 sign per pack.Sign has strong, permanent acrylic adhesive back with peel-off liner that adheres to smooth, clean, dry surface
Simple but effective photo mounting technique. Slide photos into the appropriate size sleeve, remove the pressure sensitive backing strip, and press into place. Mounted photo is protected from dirt and fingerprints by the inert Mylar sleeve. Package of 25..Simple but effective photo mounting technique.Slide photos into the appropriate size sleeve, remove the pressure sensitive backing strip, and press into place.Mounted photo is protected from dirt and fingerprints by inert Mylar sleeve.Package of 25.Size: 4" x 6".amount: pack of 25.size: 4 in. x 6 in.