NVMe Docking Stations

The ToughArmor MB833MK-B V2 is a ruggedized removable M.2 NVMe SSD enclosure that fits a single external 3.5" drive bay of the computer system and supporting PCIe 4.0 64Gb/s data transfer rates via SlimSAS 4i (SFF-8654) interface and accepts all standard M.2 drives lengths from 30mm to 110mm (2230, 2242, 2260, 2280, 22110). It simplifies the process of installing or removing M.2 NVMe SSD by using the removable drive trays with tool-less adjustable M.2 drive locker, making it easy to change drives at any time without open the computer case or dealing with drive mounting screws. In addition, while working together with numbers of ventilation holes around the enclosure, each drive tray is equipped with a high efficiency aluminum heat sink to ensure your SSDs are at optimal temperatures. As part of ICY DOCK's toughest line, the MB833MK-B V2 is made out of full metal construction with metal barrel key locks for maximum protection..Rugged and removable SSD enclosure specially designed to fit into 3.5" drive bay of the computer system.Fits 1 x M.2 NVMe SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110).Installs into any standard external 3.5" device bay or floppy bay.Rugged, full-metal enclosure meets flammability requirements.Uses a SlimSAS 4i (SFF-8654) to connect, requires NVMe host.Supports the full NVMe bandwidth specification of 64Gbps.Adjustable drive locker holds all-length drives securely.Toolless drive installation design for easy drive maintenance and system upgrading.Integrated extra-large high-efficiency heat sink and ample ventilation for excellent passive cooling.Features a two-segment key lock for additional physical security.Eagle-hook tray latch securely holds the tray inside the enclosure.EMI Grounding – protects SSDs from electrical damage.Anti-Vibration technology (AVT) reduces noise and protects against environmental damage.Active Power technology (APT) saves power by shutting the device down when no drive is installed.5-year manufacturer limited warranty

Introducing the Icy Dock ToughArmor rugged removable drive bay for 2.5" SATA hard drives and SSDs. Utilizing the standard PCIe 2.0 interface and taking only a single PCIe expansion slot, it gives you an additional hot-swappable drive bay for hard disk drives (HDDs) and solid state drives (SSDs) even when your computer does not have an open SATA port or empty drive bay. Because the single PCIe port handles both power and data, there's no additional clutter from SATA data and power cables. Fully supports hot-swapping drives with its removable drive tray..Rugged removable drive bay for 2.5" SATA hard drives and SSDs.Dimensions: 4.8"H x 6.06"W x 0.87"D.Made of ABS plastic and aluminum in black.Compatible with Mac Pro 2008-2012 models with no driver required.Fits 1 x SATA hard drive or SSD.Uses PCIe 2.0 x1 interface, also supports installation into PCIe 2.0 and PCIe 3.0 x1, x4, x8, and x16 slots.Installs into a single-width PCIe expansion slot.PCIe interface provides both power and data transfer, which ultimately reduces cable clutter.Narrow design allows for multiple bays to be installed side by side in a modular design.Includes full-height PCIe faceplate to protect against the buildup of dust.Strong hot-swap connector rated for a minimum of 10000 insertion/removal cycles.Eagle-hook lock system keeps the drive secure in the enclosure.Anti-Vibration Technology (AVT) reduces noise and protects against environmental damage.Active Power Technology (APT) saves power by shutting the device down when no drive is installed.5-year manufacturer limited warranty

Introducing the Icy Dock ToughArmor ruggedized mobile rack for hot-swapping 6x SATA/SAS SSDs and HDDs or Ultra-Slim 9.5mm CD/DVD/Blu-ray ROM optical disk drive reader for the external 5.25" bay. Featuring industrial full-metal construction inside and out, and designed for commercial applications such as military and medical systems, airborne and shipboard PCs, in-vehicle systems, servers, workstations, and mobile computer systems. Maintain optimal drive temperatures with the user-configurable 40mm cooling fan and plenty of ventilation holes throughout the enclosure. Advanced removable trays with anti-vibration protect drives in harsh environments, and built-in individual status LEDs give you drive updates at a glance..Internal ruggedized mobile rack for hot-swapping 6x SATA/SAS SSDs and HDDs or ultraslim 0.37" CD/DVD/Blu-ray ROM optical disk drive reader for the external 5.25" bay.Dimensions: 1.63"H x 5.75"W x 6.07"D; contains six bays.Designed to support HDDs and SSDs up to 0.59" in height, making them compatible with SAS drives as well as SATA drives.Comes in black.Specifically designed for application in strenuous conditions, such as in military and medical applications, avionics systems, factory and warehouse machinery, or any applications requiring a flammability rating.EZ-slide trays are fully constructed with metal, providing maximum protection to your valuable SSD inside and outside of the unit.Anti-vibration technology built into the tray reduces vibration from mechanical hard drives, reducing noise and protecting drives from vibration damage.Individual LED lights for each bay give you drive status updates at a glance, letting you know when your drives are powered on or in use.User-controllable 1.57" cooling fan works with the ample ventilation holes in the tray and chassis to remove as much heat as possible and keep drives running at optimal temperatures.Dual SATA power connectors separate ODD from HDD/SSD power for stable power delivery.5-year manufacturer limited warranty

Introducing the Icy Dock ToughArmor ruggedized mobile rack for hot-swapping 2x SATA/SAS SSDs and HDDs or Ultra-Slim 9.5mm CD/DVD/Blu-ray ROM optical disk drive reader for the external 5.25" bay. Featuring industrial full-metal construction inside and out, and designed for commercial applications such as military and medical systems, airborne and shipboard PCs, in-vehicle systems, servers, workstations, and mobile computer systems. Maintain optimal drive temperatures with the user-configurable 40mm cooling fan and plenty of ventilation holes throughout the enclosure. Advanced removable trays with anti-vibration protect drives in harsh environments, and built-in individual status LEDs give you drive updates at a glance..Internal ruggedized mobile rack for hot-swapping 2x SATA/SAS SSDs and HDDs or ultraslim 0.37" CD/DVD/Blu-ray ROM optical disk drive reader for the external 5.25" bay.Dimensions: 1.63"H x 5.75"W x 6.07"D; contains two bays.Designed to support HDDs and SSDs up to 0.59" in height, making them compatible with SAS drives as well as SATA drives.Comes in black.Specifically designed for application in strenuous conditions, such as in military and medical applications, avionics systems, factory and warehouse machinery, or any applications requiring a flammability rating.EZ-slide trays are fully constructed with metal, providing maximum protection to your valuable SSD inside and outside of the unit.Anti-vibration technology built into the tray reduces vibration from mechanical hard drives, reducing noise and protecting drives from vibration damage.Individual LED lights for each bay give you drive status updates at a glance, letting you know when your drives are powered on or in use.User-controllable 1.57" cooling fan works with the ample ventilation holes in the tray and chassis to remove as much heat as possible and keep drives running at optimal temperatures.Dual SATA power connectors separate ODD from HDD/SSD power for stable power delivery.5-year manufacturer limited warranty

Icy Dock ToughArmor supports 24 x 2.5" SAS/SATA SSD/HDD up to 7mm in height and only uses 3 x 5.25" device bays. It has six x MiniSAS HD (SFF-8643) connectors in the rear to support 24 x drives with up to 12Gbps transfer speed per drive, significantly reducing the cable clutter to improve system airflow and offer easy cable management. The large 80mm fan with three-mode fan speed control working along with intelligently placed ventilation holes keeps your drives in optimal temperature. To further improve reliability and security, the housing and trays are made with ruggedized full metal construction to ensure long-lasting durability. Moreover, with the removable EZ-Slide Nano trays, you can interchange drives within seconds without open the PC case..Supports 24 x 2.5" SAS/SATA SSD/HDD up 7mm high and only uses three 5.25" device bays.Uses three standard external 5.25" bays.Installs into one standard external 5.25" device bay.Made of metal in black.Transfer speed up to 12Gbps for SAS drives and 6Gbps for SATA drives.Powers 24 2.5" SAS/SATA drives through six 15-pin SATA power connectors.Connects 24 x 2.5" SAS/SATA drive through 6 x MiniSAS HD (SFF-8643) connector.Large 80mm cooling fan with three-mode fan speed control (high/low/off).Individual drive activity LED with three-mode brightness control (100%/50%/off).Removable EZ-Slide Nano tray for each drive maintenance.Anti-vibration technology reduces noise and protects against environmental damage.Active power technology saves power by shutting the device down when no drive is installed.Drive ID plugs are included, so you can keep track of your drives.Eagle-hook tray latch securely holds the tray inside the enclosure.EMI grounding protects SSDs from electrical damage.Supports SATA 15-pin power cables and Mini-SAS HD cables with a locking latch design.Meets or exceeds the CE, RoHS, and REACH standards.5-year manufacturer limited warranty

Icy Dock ToughArmor RAID is a ruggedized full metal dual bay removable drive enclosure that supports 2 x 2.5" SATA hard drive or SSD in a single optical 5.25" drive bay of your computer/workstation system. With the built-in hardware RAID 1 chipset and easy to read RAID status LED indicators, you can conveniently mirror the 2.5" drives for data redundancy without adding a RAID card or RAID monitoring software on the host end. In addition, Central Process Unit (CPU) is normally required to calculate a RAID but, alternatively, by having a RAID chipset on the enclosure, it frees up the CPU overhead and speeds up the whole system. Therefore this is a perfect removable drive enclosure for mission-critical computer systems that not only make your system work faster but also provides protection against your critical data..Dual-bay removable drive enclosure supports two 2.5" SATA hard drives or an SSD in a single optical 5.25" drive bay of your computer or workstation system.Supports two 2.5" SATA HDDs/SSDs 5-15mm high.Installs into one standard external 5.25" device bay.Made of metal in black.Supports data transfer speeds up to 6Gbps.Built-In JMS562 hardware RAID 1 mirroring (SAFE)/JBOD chipset.Easy-to-read RAID status LED indicators for drive power, access, fail, and RAID 1 rebuilding process.Anti-vibration technology reduces noise and protects against environmental damage.EMI grounding protects SSDs and HDDs from electrical damage.Eagle-hook tray latch securely holds the tray inside the enclosure.Ruggedized heavy-duty full-metal construction commercially designed for medical and military systems, servers, and industrial PCs.Drive ID plugs are included, so you can keep track of your drives.Eagle-hook tray latch securely holds the tray inside the enclosure.EMI grounding protects SSDs from electrical damage.Supports SATA power cables with a locking latch design.Meets or exceeds the CE, RoHS, and REACH standards.5-year manufacturer limited warranty

Icy Dock TurboSwap rugged full metal single-bay 3.5" SAS/SATA trayless hard drive enclosure designed to fit any 5.25" optical drive bay of the PC cases. This enclosure features a tray-less and tool-less drive installation design for quickly swap out drives without opening the computer case or using tools. The TurboSwap has an individual drive power button and is equipped with a heavy-duty metal door latch for the best drive protection..Single-bay 3.5" SAS/SATA trayless hard drive enclosure designed to fit any 5.25" optical drive bay of the PC cases.Supports one 3.5" SAS/SATA HDD (SAS host is required for the SAS HDD).Installed into any standard external 5.25" drive bay.Housing features a full-metal construction that is suitable for rugged-edge applications and industries that require a flammability rating; comes in black.Equipped with the brand's proven trayless technology: no screws, tools, or trays are necessary to insert or eject the drive.Open-air structure and air vents all around the device offer maximum heat dissipation.Works perfectly with your computer's cooling system and keeps your drive cool even under heavy workloads.Includes four optional mounting holes for an 80mm cooling fan.Features an easy-access drive power button that allows users to shut off the drive to reduce power and drive usage or prevent a hacker or virus attack.Supports SATA 3.0 6Gbps or SAS 3.0 12Gbps (single-channel SAS only).Supports SATA data and power cables with locking latches.Individual drive power button and drive activity light.Meets or exceeds the CE, RoHS, and REACH standards.3-year manufacturer limited warranty

Icy Dock FatCage is a dual bay RAID enclosure that supports 2 x 2.5" or 3.5" SATA hard drive or SSD in a 2 x 5.25" optical drive bay of your computer/workstation system. With the built-in hardware RAID 1 chipset and easy to read RAID status LED indicators, you can conveniently mirror the 2.5" drives for data redundancy without adding a RAID card or RAID monitoring software on the host end. Also, Central Process Unit (CPU) is normally required to calculate a RAID but, alternatively, having a RAID chipset on the enclosure frees up the CPU overhead and speeds up the whole system. Therefore this enclosure is a perfect removable drive enclosure for mission-critical computer systems that not only make your system work faster but also provide protection against your critical data..Dual-bay RAID enclosure supports one 3.5" or two 2.5" SATA hard drives, or an SSD in a dual 5.25" optical drive bay of your computer or workstation system.Supports two 2.5" or 3.5" SATA HDD/SSD.Uses two standard external 5.25" optical drive bays.Silver metal construction with partial plastic ABS in black for durability and drive cooling.Supports data transfer speeds up to 6Gbps.Built-In JMS562 hardware RAID 1 mirroring (SAFE)/JBOD chipset.Features easy-to-read RAID status LED indicators for drive power, access, fail, and RAID 1 rebuilding process; supports SATA and 15-pin power cables with locking latches.Anti-vibration technology reduces noise and protects against environmental damage.Active power technology saves power by shutting the device down when no drive is installed.Meets or exceeds the CE, RoHS, and REACH standards.3-year manufacturer limited warranty

Introducing the Icy Dock ExpressCage, a single-bay hot-swap enclosure for any 2.5" SATA/SAS hard drive or SSD for the 3.5" external bay (floppy bay). With the rising popularity of small-form-factor (SFF) and portable computing systems, there is a need for convenient and secure access to data storage devices utilizing smaller bays. To answer this, the new ExpressTray drive caddy supports completely tool-less drive installation, without sacrificing security, with its enhanced screw-less drive gripping mechanism, stabilized drive insertion design, and single-piece latch. Furthermore, the strong metal chassis provides protection against bumps and shock, while the integrated air ventilation holes work to keep your drives running cool all day, even under heavy load..Fits 1 x 2.5" SAS/SATA HDD/SSD and installs into a single 3.5" external bay (floppy bay).Single-bay enclosure dimensions: 1"H x 4"W x 5.37"D.Rugged metal housing with durable ABS caddies for maximum security and protection; comes in black.Supports 2.5" drives with 0.2", 0.28", 0.37", 0.5", and 0.6" height.Provides excellent passive cooling with multi-flow technology.Only powers on when a drive is installed to save power.Removable drive caddy system for easy installation and maintenance.Supports SATA 3.0 (6Gbps) and SAS 3.0 (12Gbps, single channel).Supports hot-swap - add or remove drives without restarting your computer.Supports SATA data and power cables with locking latches.Anti-Vibration Technology (AVT) reduces vibration from mechanical hard drives.Compatible with nearly all 2.5" SAS (single channel) drives and data center / NAS drives, including the Seagate Enterprise Nytro, EXOS, and Ironwolf, WD Red and Ultrastar, HP Enterprise (HPE), Toshiba Enterprise, and all other enterprise grade drives.Meets or exceeds the CE, RoHS, and REACH standards.3-year manufacturer limited warranty

Icy Dock EZConvert converts an M.2 NVMe PCIe SSD into the exact dimensions and port locations as a standard 2.5" U.2 (SFF-8639) NVMe SSD without using any tools or screws for drive installation. Can be installed anywhere that accepts a bare 2.5" U.2 NVMe drive, such as a U.2 backplane, 2.5" mounting bracket, or ICY DOCK U.2 NVMe removable enclosures/mobile racks. The sturdy aluminum heat sink housing protects the delicate M.2 circuit board from bumps and drops, and work perfectly with the included thermal pad for optimal heat dissipation to keep your drive running cool, even under heavy load..Convert your M.2 NVMe SSD into the 2.5" U.2 NVMe form factor with 0.37"H.Dimensions: 0.37"H x 2.76"W x 3.98"D.Made of ABS plastic and aluminum in black.Exact same dimensions, port locations, and screw-hole locations as a standard U.2 drive.Accepts any M.2 PCIe NVMe SSD.10000 insertion/removal cycle rated U.2 connector.Supports full Nvme bandwidth specification of 64Gbps.100% toolless and screwless M.2 drive installation.Dual-function aluminum heat sink and lid for optimal protection and cooling performance.Lower housing ventilation hole can pop out for additional airflow and improved cooling.Supports U.2 (SFF-8639) cables.Fits into any U.2 backplanes, 2.5" mounting brackets, or U.2 NVMe SSD enclosure.3-year manufacturer limited warranty

As the leading innovator in 2.5" drive converters, we're often in pursuit of designing the next best thing. With the Icy Dock EZConvert Lite, we took the already proven EZConvert MB882 series converters and maximized the air flow with open air designs that is certainly made to impress. The EZConverter Lite MB882SP-1S-3B converts 2.5 SATA/SAS hard drives or SSD of all heights into an exact form factor of a 3.5" SATA hard drive so you can fit your 2.5" SSD or notebook drive anywhere a 3.5" SATA drive is used (requires SAS host for SAS drives). The EZConvert Lite crafted from one piece construction makes it lightweight yet practically unbreakable –a necessary attribute for high quality system builds. Our open air design and perforated vents help keep your drives nice and cool. Anti-vibration springs help your drives from slight impact yet our drive stabilizing mechanism keeps your drives in place; it strikes a balance to carefully maintain your drives. This converter is made for any consumer or builder looking to add a 2.5" drive to their setup, from gaming rig or media workstation to enterprise data server..Converts 2.5" SATA/SAS hard drives or SSDs of all heights into the exact form factor of a 3.5" SATA hard drive, so you can fit your 2.5" SSD or notebook drive anywhere a 3.5" SATA drive is used.Dimensions: 1"H x 4"W x 5.77"D.Made of ABS plastic and aluminum in black.Featuring EZ-Fit design for anti-shock and optimal drive fit.Open air design with all-around airflow vents for maximum air flow.Completely toolless drive installation for quick and easy setup.Supports 2.5" SAS HDD/SSD with single-channel SAS functions (requires SAS host).Supports SATA 6Gbps or SAS single channel.Universal mounting holes for most common PC cases.Optional screw hole for extra drive security.Perfect for anyone looking to add a 2.5" SATA HDD/SSD to their system.3-year manufacturer limited warranty

StarTech Drive Docking Station.Device Type: HDD docking station - external.Bays: 1.Bus Type: eSATA, USB 3.1 (Gen 2).Color: Black.Expansion Bays: 1 x hot-swap - 2.5" / 3.5" shared.Hard Drive Form Factor Compatibility: 2.5", 3.5".Interface: SATA 6Gb/s

This StarTech USB 3.0 Hard Drive Docking Station delivers full, instant access to any 2.5-inch or 3.5-inch SATA (SATA, SATA II, SATA III) hard drive (HDD) or solid state drive (SSD), without having to mount the drive in a computer or install it in an external enclosure. Large capacity drives (tested with up to 4TB 3.5"" and 1TB 2.5"" drives) greatly enhance your computer's storage/backup capabilities..SuperSpeed USB 3.0 compliant host interface, with transfer rates up to 5Gbps. High Speed USB 2.0 compliant host interface, with transfer rates up to 480Mbps.Supports 2.5" and 3.5" form factor SATA hard drives (HDD) and solid state drives (SSD).Dimensions 2.6"(H) x 3.7"(W) x 5.7"(L).1 Expansion bay.Compatible with SATA revision 1/2/3 (1.5/3.0/6.0 Gbps) drives.Compact, desktop-style form factor in a solid black color.Drive connectors: 1 - SATA data and power combo (7+15 pin) receptacle.Host connector: 1 - USB 3.0 B (9 pin; SuperSpeed) female.Compatible with Microsoft Windows, Apple OSX, Linux, and Google Chrome OS.Certifications and standards CE, FCC, RoHs.2-Year Limited Warranty.A top slot-loading design and unique drive ejection mechanism provides quick and easy access to the data without having to install drives into an enclosure or tray.LED indicators 1 - power and activity (solid - power, blinking - activity); Power 12 VDC, 2.5A.Temperature 41 - 176 deg F operating, -40 - 158 deg F Storage; Humidity 8 - 80 percent RH.OS compatibility Windows 2000 XP (32 64-bit) Server 2003 (32 64-bit) Server 2008 R2 Vista (32 64-bit) 7 (32 64-bit) 8 (32 64-bit), Linux 2.6.31 and up.Insertion rating 15000 cycles.Includes USB 3.0 HDD dock, USB 3.0 cable, universal power adapter, 3 x power adapter plug (NA EU UK), instruction manual.Certifications and standards CE, FCC, RoHs.Warranty 2 years limited.StarTech USB 3.0 SATA II Hard Drive Docking Station is capable of transfer speed up 5 Gbps, making it the fastest way to access data from an external drive.

This compact M.2 NVMe SSD Enclosure for PCIe SSDs is a highly portable, high-performance data storage solution for your USB-C or Thunderbolt 3 enabled devices. Leverage the high speeds of your M.2 NVMe drive, with this external SSD enclosure. It delivers USB 3.1 Gen 2 read/write speeds up to 10Gbps, which is nearly twice the capability of traditional M.2 SATA enclosures and USB 3.1 Gen 1. NVMe allows users to take full advantage of the throughput available to USB 3.1 Gen 2, which would not be possible with a SATA drive..Turn your M.2 NVMe drive into an ultra-fast, ultra-portable storage solution for your USB-C or Thunderbolt 3 devices.USB power source.Features a solid aluminum housing designed with ventilation holes for optimal heat dissipation.Features LED indicators for power and activity.Experience an extremely fast performance with support for USB 3.1 Gen 2 and PCI Express 3.0.Made of black aluminum and plastic.Dimensions: 4.3"H x 1.6"W x 0.5"D.This slim, pocket-sized enclosure for PCIe based NVMe is specially designed for mobility, with a small form-factor design that fits easily into your laptop bag. Its lightweight, yet durable aluminum housing helps to ensure your drive won't be damaged while you're on the move.The M.2 NVMe enclosure works with tablets, laptops, desktop computers and hosts that are equipped with USB Type-C and Thunderbolt 3 ports. It's also backward compatible with USB 3.1 Gen 1, making it a convenient solution for the office or other workplace environment.Enclosure supports plug-and-play installation, making it the perfect accessory for professionals on the go.Supports Windows 7 and earlier Windows versions, do not support TRIM with USB storage devices.No software or drivers required.Maximum data transfer rate: 10Gbps.Not compatible with M.2 SATA or AHCI based SSDs.Box contains: drive enclosure, set of M.2 mounting hardware (installed), screwdriver, USB Type-C to USB Type-C cable (50cm), and quick start guide.Same day shipping is only available for orders shipping within the United States.Free lifetime technical support.2-year manufacturer limited warranty

Startech.com® 4-Bay 2.5/3.5" SATA HDD / SSD docking station supports both 2.5" and 3.5" form factor hard and solid state drives for enhanced performance. Docking station features a built-in dual 40 cm fan for optimum cooling and has SATA controllers..Drive capacity: Currently tested with up to 4TB 7200 RPM 3.5" hard drives per bay (8TB total) and 2TB 5900 RPM 2.5" hard drives (2TB total).Interfaces/ports: Serial ATA/600, 1 x USB 3.0 - 9 pin USB Type B, 4 x SATA 6Gb/s - 22 pin Serial ATA, drive connectors: 4 - SATA data & power combo (7 + 15 pin) receptacle, host connectors: 1 - USB 3.0 B (9 pin, superspeed) female.No. of expansion bays: 4 (total)/4 (free) - 2.5"/3.5" shared - external.Drive installation: Removable, fans: 2 - 40 mm, chipset ID: VL812+ASM1053E.Performance: Type and rate: USB 3.0 - 5 Gbit/s, UASP support, insertion rating: 15,000 Cycles.Black, enclosure type: Plastic.OS compatibility Windows 8/8.1 (32/64bit), 7 (32/64bit), Server 2008 (32/64), Vista(32/64), Server 2003 (32/64) XP(32/64), 2000, Apple® Mavericks (10.9) OSX Mountain Lion (10.8), Lion (10.7), Snow Leopard (10.6), Linux, Google Chrome™ OS.LED Indicators: 4 - drive power/activity LED.Save time, with file transfers up to 70% faster than traditional USB 3.0 when used with a UASP-supported host, helps to prevent premature drive failure, with built-in dual 40 cm fans that keep your drives running cool.Hassle-free operation with independent SATA controllers allowing for uninterrupted data transfers while hot-swapping the other drives.Applications: System builders and I.T. specialists who need quick access to drives for imaging, backup data quickly to an external drive for archiving, transferring data from one hard drive to another.Technicians who test or benchmark multiple hard drives, backup important data and easily take the drive to an offsite location for safekeeping.Power source: AC adapter, input: Voltage: 100 - 240 VAC, current: 2.5 A, output: Voltage: 12 DC, current: 6.5 A.Operating temperature: 5 to 35 deg C, storage temperature: -20 to 50 deg C, humidity: 20 - 80% RH.Includes: 1 - USB 3.0 4-bay 2.5/3.5" SATA SSD/HDD dock, 1 - USB 3.0 Cable, 1 - universal power adapter (NA/EU/UK/AUS), 1 - instruction manual.Certifications and standards: FCC, RoHS.Dimensions: 3.3"H x 6.7"W x 11.2"D.Weight: 36.5 oz..Warranty: 2 years.Startech.com® 4-Bay 2.5/3.5" SATA HDD / SSD docking station is designed to swap four drives from your desktop or laptop computer using a single USB port.

4 Bay Thunderbolt 3 NVMe Enclosure, For M.2 NVMe SSD Drives, 1x DisplayPort Video and 2x TB3 Downstream Ports, 40Gbps.Turn up to 4 80mm PCIe M.2 M-Key NVMe and/or AHCI SSDs into an external Thunderbolt 3 storage solution.Data transfer speeds up to 40Gbps w/8Gbps PCIe lane dedicated to each drive.Downstream TB3 port | DisplayPort output w/resolutions up to 4K 60Hz.Thunderbolt 3 Certified works w/TB3/TB4 MacBook Pro 16/13/Air/Lenovo ThinkPad X1 Carbon/T Series/ Dell XPS/Latitude/Precision/HP EliteBook.Includes: 72W EPS power supply | 3.3' Thunderbolt 3 cable.Vented metal w/ thermal pads and fan.4-Drive PCIe M.2 Enclosure | Thunderbolt & trade; 3 | 72W EPS Power Supply & 2.3' (70 cm) Thunderbolt 3 Cable Included