NVMe Docks

Increase your productivity with the j5create M.2 NVMe USB 3.2 Gen 2 Type-C docking station, transforming your Thunderbolt 3 or USB Type-C compatible laptop into a dual 4K workstation with up to 10Gbps data transfer rate. This high-performance dock features an M.2 NVMe/SATA PCIe SSD slot to expand your internal storage space, three USB SuperSpeed 10Gbps ports (one USB Type-C and two USB Type-A), a Gigabit Ethernet port, SD and microSD memory card reader/writer, and a USB Type-A 5Gbps port. This USB 3.2 Gen 2 Type-C docking station supports 100W Power Delivery pass-through to power and charge your laptop while powering all connected devices. With the built-in PCIe M.2 SSD enclosure and extra storage you can access through an SD and microSD card, this is a must-have for creative professionals using a Mac device..M.2 NVMe USB 3.2 Gen 2 Type-C docking station is perfect for dual-monitor setup with MacBook Pro and MacBook Air.Dimensions: 1.02"H x 3.14"W x 12.5"D.Provides three USB SuperSpeed 10Gbps ports (one USB Type-C and two USB Type-A) to connect peripherals.Package includes docking station and quick installation guide.Contains: 1 x M.2 NVMe/SATA slot, 1 x USB 3.2 Gen 2 Type-C, 1 x USB Type-C (Power Delivery 3.0), 2 x USB 3.2 Gen 2 Type-A, 1 x USB 3.2 Gen 1 Type-A, 1 x 4K HDMI, 1 x 4K DisplayPort, 1 x SD and microSD 3.0 memory card reader/writer, 1 x RJ45 Gigabit Ethernet, and 1 x security lock slot.Built-in M.2 expansion SSD slot supports 2230, 2242, 2260, and 2280 M.2 NVMe SSD with ultrafast read and write speeds.Security slot prevents equipment theft in a wide range of business or institutional environments.Supports extended dual 4K displays (HDMI and DisplayPort) on Intel MacBook Pro and MacBook Air.Supports a single display via HDMI on other USB Type-C compatible laptops connected via one USB Type-C port.Supports 100W Power Delivery pass-through to power and charge your laptop while powering all connected devices.Flexible design gives you the ability to connect to a variety of compatible devices.2-year manufacturer limited warranty.⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Create a 40G data transmission ultra-high performance workstation by connecting a single Thunderbolt 3 with DP 1.4 Alt mode input to multiple displays and includes two M.2 M-Key NVMe SSD PCIe excellent storage drives enhanced data transfer, backup speed, and disk upgrade (M.2 M-Key NVMe SSDs are not included). Allows you to connect either a single 8K display through a Thunderbolt 3 port / DisplayPort 1.4 port or two 4K (3840x2160) at 60Hz Ultra HD displays through Thunderbolt 3 and DisplayPort 1.4 ports for stunning and crystal-clear video quality. Compatible with the latest memory card such as SD 4.0 UHS-II. Supports data transfer rate up to 270Mbps and a maximum capacity of 2TB. PD 3.0 charging specification compatible supplies up to 87watts to charge your laptop, notebook, tablet, and smartphone. Includes 150W power adapter to provide sufficient power for your connected peripherals. Premium metal housing provides efficient heat dissipation for reliable performance and long life; the built-in LED provides easy recognition of power status. Its unique, elegant, and sturdy style is blends into your lifestyle and life taste.Expand multiple connectivity ports to your Thunderbolt 3 with DP 1.4 Alt Mode enabled Mac or Windows PC to increase your efficiency.Dimensions: 1.67"H x 5.86"W x 5.55"D.Connects via Thunderbolt 3 port.Package contents: Thunderbolt 3 DP 1.4 docking station with dual M.2 NVMe SSD and PD, Thunderbolt 3 cable, power adapter (20V/7.5A), user reference guide.Adds one Thunderbolt 3 port (host), one Thunderbolt 3 output port, one DisplayPort 1.4 video output port, one USB Type-C 3.1 Gen 2 output port, two USB Type-A 3.1 Gen 1 output ports, one USB Type-A 3.1 Gen 2 output port, one Gigabit Ethernet, two M-Key M.2 PCIe NVMe SDD slots, one SD memory card slot, one 3.5mm stereo audio jack, and one 3.5mm microphone input.Allows you to connect either a single 8K display through a Thunderbolt 3 port/DisplayPort 1.4 port or two 4K (3840 x 2160) at 60Hz Ultra HD displays through Thunderbolt 3 and DisplayPort 1.4 ports for stunning and crystal clear video quality.Accommodates two M-Key 2280 form factor M.2 PCIe NVMe SSD interfaces (SSDs are not included) each supporting data transfer rate up to 1.5Gbps.Compatible with a memory card, such as SD 4.0 UHS-II, providing data transfer rate up to 270Mbps and a maximum capacity of 2TB.PD 3.0 charging specification compatible supplies up to 87W to charge your laptop, notebook, tablet, and smartphone.Reliable wired network connectivity through embedded 10/100/1000BASE-T Gigabit Ethernet port.Premium metal housing provides efficient heat dissipation for reliable performance and long life.Meets or exceeds FCC, CE, RoHS, TAA standards.Supported OS: Windows 10, macOS 10.14 or higher.2-year manufacturer limited warranty

The ToughArmor MB833MK-B V2 is a ruggedized removable M.2 NVMe SSD enclosure that fits a single external 3.5" drive bay of the computer system and supporting PCIe 4.0 64Gb/s data transfer rates via SlimSAS 4i (SFF-8654) interface and accepts all standard M.2 drives lengths from 30mm to 110mm (2230, 2242, 2260, 2280, 22110). It simplifies the process of installing or removing M.2 NVMe SSD by using the removable drive trays with tool-less adjustable M.2 drive locker, making it easy to change drives at any time without open the computer case or dealing with drive mounting screws. In addition, while working together with numbers of ventilation holes around the enclosure, each drive tray is equipped with a high efficiency aluminum heat sink to ensure your SSDs are at optimal temperatures. As part of ICY DOCK's toughest line, the MB833MK-B V2 is made out of full metal construction with metal barrel key locks for maximum protection..Rugged and removable SSD enclosure specially designed to fit into 3.5" drive bay of the computer system.Fits 1 x M.2 NVMe SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110).Installs into any standard external 3.5" device bay or floppy bay.Rugged, full-metal enclosure meets flammability requirements.Uses a SlimSAS 4i (SFF-8654) to connect, requires NVMe host.Supports the full NVMe bandwidth specification of 64Gbps.Adjustable drive locker holds all-length drives securely.Toolless drive installation design for easy drive maintenance and system upgrading.Integrated extra-large high-efficiency heat sink and ample ventilation for excellent passive cooling.Features a two-segment key lock for additional physical security.Eagle-hook tray latch securely holds the tray inside the enclosure.EMI Grounding – protects SSDs from electrical damage.Anti-Vibration technology (AVT) reduces noise and protects against environmental damage.Active Power technology (APT) saves power by shutting the device down when no drive is installed.5-year manufacturer limited warranty

The ToughArmor MB834MK-B V2 is a ruggedized two-bay removable M.2 NVMe SSD enclosure that fits a single external 3.5" drive bay of the computer system and supports PCIe 4.0 64Gb/s data transfer rates via SlimSAS 4i (SFF-8654) interface and accepts all standard M.2 drives lengths from 30mm to 110mm (2230, 2242, 2260, 2280, 22110). It simplifies the process of installing or removing M.2 NVMe SSD by using the removable drive trays with tool-less adjustable M.2 drive locker, making it easy to change drives at any time without open the computer case or dealing with drive mounting screws. In addition, while working together with numbers of ventilation holes around the enclosure, each drive tray is equipped with a high-efficiency aluminum heat sink to ensure your SSDs are at optimal temperatures. As part of Icy Dock's toughest line, the MB834MK-B V2 is made out of full metal construction with metal barrel key locks for maximum protection..Rugged and removable SSD enclosure specially designed to fit into 3.5" drive bay of the computer system.Fits 2 x M.2 NVMe SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110).Installs into any standard external 3.5" device bay or floppy bay.Rugged, full-metal enclosure meets flammability requirements.Uses 2 x SlimSAS 4i (SFF-8654) to connect, requires NVMe host.Supports the full NVMe bandwidth specification of 64Gbps.Adjustable drive locker holds all-length drives securely.Toolless drive installation design for easy drive maintenance and system upgrading.Integrated extra-large high-efficiency heat sink and ample ventilation for excellent passive cooling.Features a two-segment key lock for additional physical security.Eagle-hook tray latch securely holds the tray inside the enclosure.EMI Grounding – protects SSDs from electrical damage.Anti-Vibration technology (AVT) reduces noise and protects against environmental damage.Active Power technology (APT) saves power by shutting the device down when no drive is installed.5-year manufacturer limited warranty

Introducing the ToughArmor MB720MK-B V3, a rugged and removable quad M.2 PCIe 4.0 NVMe SSD enclosure designed for a 5.25" optical drive bay. This powerful enclosure supports blazing-fast data transfer rates of up to 64Gbp/s through the OCulink (SFF-8612) interface and is compatible with Tri-mode host cards. Installing or removing M.2 NVMe SSDs has never been simpler, thanks to the removable drive trays with tool-less adjustable M.2 drive lockers. You can easily swap drives without having to open your computer case or mess with mounting screws. To ensure top-notch cooling performance, the MB720MK-B V3 comes equipped with dual cooling fans in the back, effectively dissipating the heat generated by high-speed PCIe 4.0 SSDs. Moreover, each drive tray features an extra-large heatsink lid and thermal pad, keeping your SSDs at optimal temperatures. As part of ICY DOCK's toughest line, the MB720MK-B V3 boasts a full metal construction and metal barrel key locks, providing maximum protection for your valuable drives..Rugged and removable SSD enclosure specially designed to fit into a 5.25" optical drive bay.Fits 4 x M.2 NVMe SSDs of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110).Installs into any standard external 5.25" optical drive bay.Rugged, full-metal enclosure meets flammability requirements.Supports Tri-mode controllers PCIe/NVMe pinout (Broadcom, Areca, and more).Connects with 4x OCulink (SFF-8612) (NVMe host required).Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay.Patent-pending screw-less M.2 adjustable locker securely holds all length drives.Removable and tool-less drive installation design for easy drive maintenance.Integrated large, high-efficiency heatsink and ample ventilation for excellent cooling performance.Features a two-segment key lock for additional physical security.Eagle-hook tray latch securely holds the drive tray inside the enclosure.Supports SATA 15-pin and OCuLink cables with locking latch design for a secure connection.EMI Grounding protects SSDs from electrical damage.5-year manufacturer limited warranty

Introducing the Icy Dock ToughArmor MB873MP-B V2, a rugged and removable 8 x M.2 PCIe 4.0 NVMe SSD enclosure specially designed to fit into a 5.25" optical drive bay. This powerful enclosure offers exceptional performance, supporting lightning-fast data transfer rates of up to 64 Gbps via the OCuLink (SFF-8612) interface, and is compatible with Tri-mode host cards. It is made out of heavy-duty full-metal construction and uses removable M.2 SSD trays that support tool-less drive installation/removal for effortless drive maintenance. In addition, the MB873MP-B V2 is equipped with dual 40 x 20mm cooling fans in the rear to remove the heat generated by the high-speed PCIe 4.0 SSD for the best cooling performance..Rugged and removable SSD enclosure specially designed to fit into a 5.25" optical drive bay.Supports 8 x PCIe M.2 NVMe SSDs of all lengths - 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110).Installs into 1 x standard external 5.25" optical drive bay.Rugged, full-metal enclosure meets flammability requirements.Uses 8 x OCuLink (SFF-8612) to connect, pin-out defined by SFF-9402 Rev 1.1.Supports PCIe 4.0 specifications with transfer rates up to 64Gbps per drive bay.Provides support for Tri-Mode controller cards from leading brands like Broadcom, Areca, and others.Powers 8 x M.2 SSDs through 2 x 15 - pin SATA power connectors.Features a removable drive tray with tool-less drive installation for easy drive maintenance.Equipped with high-performance dual 40 x 20mm cooling fans.Huge heatsink trays with thermal pads included dispersing heat from the drive.Anti-Vibration technology - creates a safe environment for SSDs.Active Power technology - saves power by shutting off the enclosure when no drive is installed.EMI Grounding protects SSDs from electrical damage.Drive ID plugs are included, so you can keep track of your drives.Eagle-hook tray latch securely holds the drive tray inside the enclosure.Supports SATA 15-pin and OCuLink cables with a locking latch design for a secure connection.2 x SATA 15pin power cables are included.Well-suited for high-performance PCs, compact servers, workstation PCs, and data centers where efficient storage utilization is crucial.5-year manufacturer limited warranty

The Icy Dock ToughArmor MB720M2K-B is a quad M.2 NVMe ruggedized removable enclosure. With this enclosure, your NVMe SSD no longer requires to be installed onto the motherboard or even a riser card, which is typically held with a tiny screw. Now it can be installed and accessed from the comfort of the frontal bay of the computer. In addition, it comes with the brand's patent-pending M.2 adjustable drive locker, which can easily place your drive without any tools or screws..Removable internal SSD mobile rack is designed to house up to four M.2 PCIe NVMe SSDs, supporting blazing PCIe x4 transfer speed up to 64Gbps via Mini-SAS HD (SFF-8643).Fits four M.2 NVMe SSDs of all lengths, including 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110).Ruggedized full-metal enclosure that meets the flammability requirements.Adjustable drive locker holds all drives securely.Installs into any standard external 5.25" device bay.Uses four Mini-SAS HDs (SFF-8643) to connect, requires an NVMe host.Supports the full NVMe bandwidth specification of 64Gbps per channel.Integrated extra-large high-efficiency heat sink and ample ventilation for excellent passive cooling.Features a two-segment key lock for additional physical security.Eagle-hook tray latch securely holds the tray inside the enclosure.EMI grounding protects SSDs from electrical damage.Anti-vibration technology (AVT) reduces noise and protects against environmental damage.Toolless drive installation design for easy drive maintenance and system upgrading.Package contents: enclosure, user manual, screws, thermal pads.Meets or exceeds the CE, RoHS, and REACH standards.5-year manufacturer limited warranty

The Next Generation NVMe Mobile Rack: The MB601VK-B is ICY DOCK's next generation PCI-E based mobile rack with ability in supporting Intel, Micron, and Seagate ultra high speed 2.5" U.2 NVMe solid-state-disk in an external 3.5" floppy drive bay. Superior Performance : Built with the next generation U.2 interface, MB601VK-B offers up to 32Gb/s of bandwidth and supports 2.5" U.2 NVMe SSD, SAS and SATA interface 2.5" solid state drives or hard drives. The superior performance of MB601VK-B provides the maximum amount of transfer speed for the most data intensive tasks; such as real time large database transfers and refreshes, massive bulk data swaps from multiple networks, VMware providing virtual operating systems for mulitple computers, and large scale editing of large multimedia assets of virtual reality, video, music, and other graphics between multiple workstations. Convenient Utility Accessibility: The EZ Slide Mini trays supports U.2 hot-swap feature, which makes U.2 NVMe SSD interchangeability and maintenance completely hassle-free. With a simple swap of the SSD / HDD, your overall down time is greatly reduced especially when a drive is needed to be switched. The tray is also designed to accommodate 7 to 15mm height hard drives and SSD, creating a 2.5" hot swap bay for U.2 NVMe SSD or any standard SAS / SATA hard drives and SSDs. While the tray is not inside the MB601VK-B, the Anti-Dust Flap feature helps prevent dust from entering into the mobile rack. The front of the MB601VK-B includes a status LED when the drive is powered on, off and accessed. Active Power Technology (APT) allows the status LED to be on only when a hard drive is inserted into the enclosure. For drive security, the eagle-hook lock system on the tray makes sure your hard drives will not eject when not needed. Additionally, the 2 segment key lock provides extra protection to theft of hard drives as well as safeguards any sensitive data. Full Metal Protection: Making sure that the material used is designed in a way where it can be relied upon for many years after its deployment, the MB601VK-B is constructed out of heavy duty metal throughout the entire device and is capable of holding up in the harshest environments. With the Full Metal design, the ToughArmor is perfect for industrial, military and medical devices that may require a flammability rating as the full metal material is considered to be compliant with flammability requirements..Fits 1 x 2.5" U.2 NVMe SSD or 2.5" SAS / SATA SSD / HDD.NVMe U.2 host is required to accept NVMe SSD, SAS or SATA SSD / HDD.Fits any external 3.5" drive bay or floppy bay

USB-C 10Gbps M.2 NVMe PCIe SSD Enclosure - Rugged Aluminum External M.2 PCIe M-Key Case IP67 Rated - 1GB/s Read/Write - Supports 2230/2242/2260/2280 - TB3 Compatible - Mac/PC (M2E1BRU31C).BROAD DRIVE COMPATIBILITY: Compatible with M.2 NGFF M-Key PCI Express drives sized 2230/2242/2260/2280 including Samsung 950/960/970, Kingston, Seagate, Western Digital (WD), HP, and Intel SSD drives.BROAD HOST COMPATIBILITY: 50cm USB-C cable incl. for compatibility w/ any USB Type-C (USB 3.1 Gen 2 & USB 3.0) or Thunderbolt 3 (TB3) device; OS Support includes Windows, Mac, Chrome, Linux, & Ubuntu.EASY INSTALL: USB 3.2 Gen 2x1 M.2 NVMe PCIe SSD Enclosure adapter w/ rubber feet offers firm grip, protects surfaces from scratches & raises the case for air flow; mounting hardware & screwdriver incl.HIGH PERFORMANCE M.2 NVMe STORAGE: External USB-C housing for your PCIe M.2 SSD (Solid State Drive); features USB 3.1 Gen 2 (10Gbps), UASP & PCIe 3.0 for read/write data transfer speeds up to 1GB/s.PORTABLE & RUGGED: Solid aluminum housing w/ internal thermal pad for heat dissipation transfers heat away from drive; IP67 rated 100% dustproof/water resistant & MIL-STD-810G drop test certified.Rugged SSD Enclosure | Thunderbolt 3 Compatible | USB-C Cable Included

ICYDOCK's latest product for NVMe U.2 SSD brings the next level of ultra high speed storage in a compact package with the ToughArmor MB699VP-B. The ToughArmor MB699VP-B is a ruggedized full metal SSD cage with hot-swappable drive caddies, supporting up to 4x NVMe U.2 SSD in a single 5.25" device bay. Countless Options in a Single Bay: To fully use the speeds of NVMe SSDs, each drive bay uses its own miniSAS HD (SFF-8643) connector, maximizing NVMe U.2 SSD 's potential transfer bandwidth rate of 32Gb/s. The MB699VP-B features hot-swappable EZ slide trays found throughout the ToughArmor series, allowing for easy swaps of U.2 drives and utilizing the hot-swapping function that U.2 SSD natively supports. For extra protection, the EZ-slide trays are fully constructed with metal provided maximum protection to your valuable SSD inside and outside of the unit. Not just the EZ-slide trays are made out of durable metals, the entire unit is also full metal construction, ensuring that the drives are safe and secure while inside the unit. To bring more utility to your hard drives and SSDs, a LED is installed into the front of the mobile rack to provide drive status information at all time when the drive is powered on, off and accessed. Active Power Technology (APT) allows each LED and the cooling fan to be active only when a hard drive is inserted into the enclosure. When the unit does power up, two 40mm cooling fan placed strategically behind the rear panel provide airflow throughout the entire cage cooling all 4 bays effectively and efficiently. With two ball-bearing fans attached and three fan speed settings: high, low and off, depending on the drive usage, user can manually select the proper cooling option accordingly. Never forget which drives belong in what bays. With our individual drive ID labels you'll always know which drive tray belongs in your RAID array or which drive contains certain files. Freely unplug and rearrange them to better suit your configuration or simply remove them for a more simplified look. The ToughArmor MB699VP-B supports 15pin SATA power cables with locking latches so you'll never need to worry about cables unintentionally disconnecting from your enclosure. Once these cables are connected, they'll lock into place and stay that way.Rugged Heavy duty full metal construction with commercially designed for Medical & Military systems, Media servers, and IPCs, approved & used by Tier 1 companies.Perfect for rugged applications and complies to flammability requirements.Fits 4 x 2.5" U.2 NVMe SSD.With 12 USB ports, connect/disconnect devices while not having to shut down the system

Introducing the Icy Dock ToughArmor, the world's first ruggedized M.2 PCIe NVMe SSD toolless removable rack. Your M.2 NVMe SSD no longer requires to be installed on a motherboard or a riser card with a tiny screw, but it can now be installed and accessed from the front of your computer without any tools! The ToughArmor MB834M2K-B comes with a patent-pending tool-less M.2 drive installation design which will alleviate the pain that many users experience when installing M.2 drives and offer easy drive maintenance and system upgrading. The ToughArmor MB834M2K-B supports blazing-fast PCIe x4 transfer speed up to 64Gb/s via MiniSAS HD (SFF-8643) and accepts all standard M.2 drives lengths from 30mm to 110mm (2230, 2242, 2260, 2280, 22110). In addition, while working together with numbers of ventilation holes around the enclosure, each drive tray is equipped with a high-efficiency aluminum heat sink to ensure all the M.2 NVMe SSDs remain within their optimal temperature even when it is under full load..Two-bay M.2 PCIe 3.0/4.0 NVMe SSD mobile rack for an external 3.5" drive bay.Fits 2x M.2 NVMe SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110).Installs into any standard external 3.5" device bay or floppy bay.Uses a miniSAS HD port to connect, requires NVMe host.Made of metal and plastic in black; ruggedized full-metal enclosure meets flammability standards.Adjustable drive locker holds all-length drives securely.Toolless drive installation design for easy drive maintenance and system upgrading.Supports the full NVMe bandwidth specification of 64Gbps.Integrated extra-large high-efficiency heat sink and ample ventilation for excellent passive cooling.Features a two-segment key lock for additional physical security.Eagle-hook tray latch securely holds the tray inside the enclosure.EMI grounding protects SSDs from electrical damage.Anti-Vibration Technology (AVT) reduces noise and protects against environmental damage, Active Power Technology (APT) saves power by shutting the device down when no drive is installed.Meets or exceeds the CE, RoHS, and REACH standards.5-year manufacturer limited warranty

4 Bay Thunderbolt 3 NVMe Enclosure, For M.2 NVMe SSD Drives, 1x DisplayPort Video and 2x TB3 Downstream Ports, 40Gbps.Turn up to 4 80mm PCIe M.2 M-Key NVMe and/or AHCI SSDs into an external Thunderbolt 3 storage solution.Data transfer speeds up to 40Gbps w/8Gbps PCIe lane dedicated to each drive.Downstream TB3 port | DisplayPort output w/resolutions up to 4K 60Hz.Thunderbolt 3 Certified works w/TB3/TB4 MacBook Pro 16/13/Air/Lenovo ThinkPad X1 Carbon/T Series/ Dell XPS/Latitude/Precision/HP EliteBook.Includes: 72W EPS power supply | 3.3' Thunderbolt 3 cable.Vented metal w/ thermal pads and fan.4-Drive PCIe M.2 Enclosure | Thunderbolt & trade; 3 | 72W EPS Power Supply & 2.3' (70 cm) Thunderbolt 3 Cable Included