NVMe PCIe Adapter Multiple Slots
6 results
Dual M.2 PCIe SSD Adapter Card - x8 / x16 Dual NVMe or AHCI M.2 SSD to PCI Express 3.0 - M.2 NGFF PCIe (M-Key) Compatible - Supports 2242, 2260, 2280 - JBOD - Mac & PC (PEX8M2E2).BACKWARD COMPATIBILITY: Compatible w/ PCIe 1.0 & 2.0 and x8 or x16 slots, PCIe bifurcation is not required. Works with all workstation and server OS's such as Windows, Linux, and macOS incl. legacy..HIGH PERFORMANCE: Install 2 PCIe 3.0 M.2 SSDs (NVMe or AHCI) into your workstation or server for read/write speeds up to 3GB/s and 2.8GB/s for single-drives or 2.4GB/s and 1.42GB/s (per drive) for 2.RAID FUNCTIONALITY: M.2 PCI Express adapter lets you use SSDs individually or in a storage pool using OS or 3rd party RAID software (RAID 0, 1, SPAN, JBOD) for tiered/hybrid storage.VENTED DUAL-PROFILE BRACKETS: Pre-installed full profile bracket with low-profile (half-height) bracket in box & vented design for better cooling, avoiding drive throttling and improving reliability..WIDE COMPATIBILITY: Dual M.2 PCIe SSD adapter card was extensively tested to ensure compatibility w/ Samsung 970 evo, 950 Pro, SM951, & other 2242, 2260, 2280mm PCIe M-Key M.2 NGFF SSDs (NVMe or AHCI).PCI Express 3.0 M.2 SSD Adapter Card | For PCIe NVMe and PCIe AHCI M.2 SSDs
Dual M.2 PCIe SSD Adapter Card, x8 / x16 Dual NVMe or AHCI M.2 SSD to PCI Express 4.0, Up to 7.8GBps/Drive, For 2242/2260/2280/22110mm PCIe M-Key M2 SSDs, Bifurcation Required - PC/Linux Compatible.This Dual M.2 PCIe SSD Adapter enables you to install 2x PCIe M.2 SSDs (NVMe or AHCI) into a computer through an available x8/x16 PCI Express 4.0 slot | Read and write speeds up to 7.8GBps per drive.PCIe Bifurcation support is required by the Computer/Motherboard | Compatible with PCIe 3.0 x8 or x16 slots | Windows/Linux.Access the M.2 PCIe SSDs individually | Software RAID support for RAID 0/RAID 1/JBOD.Vented full-profile bracket pre-installed and low-profile bracket included.Dual M.2 NVMe / AHCI | PCIe 4.0 x8 or x16 Slot | Bifurcation
Experience blistering fast data transfer speeds while expanding your storage with the Hyper M.2 x16 Gen5 Card from ASUS. With four M.2 2242/2260/2280/22110 slots with Q-Latch, you can install separately purchased PCIe 5.0 x4 NVMe SSDs. Then, installing this card into an available PCIe 5.0 x16 slot allows you to transfer up to 512 Gb/s with compatible Intel or AMD motherboards and processors..Type of Processor Compatibility, Motherboard & Accessory Type & Use: PCI Express 5.0 x16.System Speed: support data transfer rates up to 512 Gbps.Graphics Output: PCIe 5.0 x16 interface.ā WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Install an SSD into a desktop or server using an available PCI Express 4.0 slot. The pre-installed full-profile bracket and included drive mounting screws enable the connection of a U.3 NVMe drive to a PCIe slot, avoiding the need for a drive backplane or additional cables. This adapter is not compatible with U.2 drives. The StarTech adapter card is backward compatible with motherboards that feature x4, x8, and/or x16 PCIe 3.0 slots. The U.3 adapter requires no additional drivers or software and works with all workstation and server operating systems, such as Windows, Windows Server, and Linux..To enable ultrafast data access, add a 2.5" U.3 NVMe SSD into a PCIe 4.0 x4/x8/x16 slot in a desktop or server using the included screws.Pre-installed full-profile bracket and included drive mounting screws enable the connection of a U.3 drive to a PCIe slot, without the need of a drive backplane or additional cables.Supports SFF-TA-1001 drives up to 15mm in height; not compatible with U.2 drives.Works with all workstation and server operating systems such as Windows, Windows Server, and Linux.Vented full-profile bracket and a large cutout in the PCB allow for better airflow and heat dissipation, which helps maintain optimal and reliable performance while reducing potential thermal throttling.Backward compatible with PCIe 3.0 motherboards that have an available x4, x8, or x16 PCIe slot.Box contains: adapter, four drive mounting screws, quick start guide.2-year manufacturer limited warranty
Introducing the ToughArmor MB720MK-B V3, a rugged and removable quad M.2 PCIe 4.0 NVMe SSD enclosure designed for a 5.25" optical drive bay. This powerful enclosure supports blazing-fast data transfer rates of up to 64Gbp/s through the OCulink (SFF-8612) interface and is compatible with Tri-mode host cards. Installing or removing M.2 NVMe SSDs has never been simpler, thanks to the removable drive trays with tool-less adjustable M.2 drive lockers. You can easily swap drives without having to open your computer case or mess with mounting screws. To ensure top-notch cooling performance, the MB720MK-B V3 comes equipped with dual cooling fans in the back, effectively dissipating the heat generated by high-speed PCIe 4.0 SSDs. Moreover, each drive tray features an extra-large heatsink lid and thermal pad, keeping your SSDs at optimal temperatures. As part of ICY DOCK's toughest line, the MB720MK-B V3 boasts a full metal construction and metal barrel key locks, providing maximum protection for your valuable drives..Rugged and removable SSD enclosure specially designed to fit into a 5.25" optical drive bay.Fits 4 x M.2 NVMe SSDs of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110).Installs into any standard external 5.25" optical drive bay.Rugged, full-metal enclosure meets flammability requirements.Supports Tri-mode controllers PCIe/NVMe pinout (Broadcom, Areca, and more).Connects with 4x OCulink (SFF-8612) (NVMe host required).Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay.Patent-pending screw-less M.2 adjustable locker securely holds all length drives.Removable and tool-less drive installation design for easy drive maintenance.Integrated large, high-efficiency heatsink and ample ventilation for excellent cooling performance.Features a two-segment key lock for additional physical security.Eagle-hook tray latch securely holds the drive tray inside the enclosure.Supports SATA 15-pin and OCuLink cables with locking latch design for a secure connection.EMI Grounding protects SSDs from electrical damage.5-year manufacturer limited warranty
Introducing the Icy Dock ToughArmor MB873MP-B V2, a rugged and removable 8 x M.2 PCIe 4.0 NVMe SSD enclosure specially designed to fit into a 5.25" optical drive bay. This powerful enclosure offers exceptional performance, supporting lightning-fast data transfer rates of up to 64 Gbps via the OCuLink (SFF-8612) interface, and is compatible with Tri-mode host cards. It is made out of heavy-duty full-metal construction and uses removable M.2 SSD trays that support tool-less drive installation/removal for effortless drive maintenance. In addition, the MB873MP-B V2 is equipped with dual 40 x 20mm cooling fans in the rear to remove the heat generated by the high-speed PCIe 4.0 SSD for the best cooling performance..Rugged and removable SSD enclosure specially designed to fit into a 5.25" optical drive bay.Supports 8 x PCIe M.2 NVMe SSDs of all lengths - 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110).Installs into 1 x standard external 5.25" optical drive bay.Rugged, full-metal enclosure meets flammability requirements.Uses 8 x OCuLink (SFF-8612) to connect, pin-out defined by SFF-9402 Rev 1.1.Supports PCIe 4.0 specifications with transfer rates up to 64Gbps per drive bay.Provides support for Tri-Mode controller cards from leading brands like Broadcom, Areca, and others.Powers 8 x M.2 SSDs through 2 x 15 - pin SATA power connectors.Features a removable drive tray with tool-less drive installation for easy drive maintenance.Equipped with high-performance dual 40 x 20mm cooling fans.Huge heatsink trays with thermal pads included dispersing heat from the drive.Anti-Vibration technology - creates a safe environment for SSDs.Active Power technology - saves power by shutting off the enclosure when no drive is installed.EMI Grounding protects SSDs from electrical damage.Drive ID plugs are included, so you can keep track of your drives.Eagle-hook tray latch securely holds the drive tray inside the enclosure.Supports SATA 15-pin and OCuLink cables with a locking latch design for a secure connection.2 x SATA 15pin power cables are included.Well-suited for high-performance PCs, compact servers, workstation PCs, and data centers where efficient storage utilization is crucial.5-year manufacturer limited warranty
You May Also Like
M.2 NVMe SSD to PCIe x4 Removable Mobile Rack for PCI Express Expansion Slot, Tool-less Installation, PCIe Hot-Swap Drive Bay.REMOVABLE M.2 DRIVE BAY: Use an available PCIe 4.0 x4 expansion slot to install, remove, or swap PCIe M.2 SSDs (NVMe or AHCI); Supports 2230, 2242, 2260, and 2280 M-Key M.2 NVMe SSDs; Capable of reaching high-performance read/write speeds up to 64Gbps.TOOLLESS INSTALLATION: Install an M.2 drive into the drive tray or insert the tray into the drive bay without the need for tools; Power/Activity LED indicator; Drive tray features a latching mechanism and is lockable for secure installation (2 keys incl.).OPTIMAL PERFORMANCE: Vented stainless steel frame, bracket, and tray with thermal pads and aluminum cover aid heat dissipation; Anti-vibration springs on the drive tray reduce shock or vibrations; Optional screw for stability; Incl. Low-profile bracket.COMPATIBILITY: No drivers or software required and works on any operating system including Windows, Windows Server, Linux; Supports PCI Express 4.0 and 3.0 motherboards with an available x4, x8, or x16 slot; Not compatible with M.2 SATA drives.HOT SWAP: Additional drive trays (TR-M2-REMOVABLE-PCIE, sold separately, coming soon) offer flexibility/convenience when working with multiple drives; PCIe hot swap support is dependent on the motherboard, check with the manufacturer to confirm support.Additional drive trays (TR-M2-REMOVABLE-PCIE, sold separately) provide flexibility and convenience when managing multiple M.2 drives. NVMe PCIe hot swap support is dependent on the motherboard. Verify hot swap support with the manufacturer of the motherboard, and for instructions regarding how to enable this feature..The vented stainless-steel frame and tray with thermal pads aids heat dissipation, ensuring optimal and reliable performance while reducing potential thermal throttling. Anti-vibration springs on the drive tray reduce impact during installation and enhance the overall stability and longevity of the drive. A low-profile bracket is included for small form-factor systems..Install an M.2 drive into the drive tray and insert the tray into the drive bay, without the need for tools. The drive tray features a power/activity LED indicator to monitor drive status. A latching mechanism with optional lock (2 keys included) deters the theft of mission-critical data storage devices..Package Contents:M.2 to PCIe Adapter Card,1 x Low-Profile Bracket,1 x M.2 Drive Tray,1 x Set of Keys,1 x Quick-Start Guide.StarTech.com M.2 NVMe SSD to PCIe x4 Removable Mobile Rack for PCI Express Expansion Slot, Tool-less Installation, PCIe Hot-Swap Drive Bay - Utilize a PCIe x4 expansion slot as a removable drive bay for M.2 SSDs; Supports up to 2280 M-Key M.2 NVMe SSDs; Tool-less installation; Lockable Drive Tray (2 keys incl.); Tray with thermal pads/anti-vibration springs; No drivers/software required
The StarTech.com PEX4M2E1 x4 PCIe express to M.2 PCIe SSD adapter offers best cost effective solution for ultra fast data access, as well as boost your system speed and performance by adding a PCIe M.2 SSD to your PC. This red adapter is equipped with a full profile bracket and includes a low profile bracket for installation in small form factor computers..Bus type: PCI Express.Compatible drive types (Type and Rate): M.2 (NGFF, M-Key, PCIe x4).Drive installation: Fixed.Drive size: 22 m - M.2 NGFF.Interface: PCI Express.Supported drive height(s): 2242, 2260, 2280, 22110.Drive connectors: 1 x M.2 (NGFF, M-Key, PCIe x4).Host connectors: 1 x PCI Express x4 male.OS compatibility: OS independent.LED indicators: 1 x pin header on board for drive LED connection.Operating temperature: 5 to 50 deg C (41 to 122 deg F), storage temperature -25 to 70 deg C (-13 to 158 deg F).Comes in red color.Max drive height: 4.3".Dimensions: 7.2"H x 4.8"W x 7"L.Weight: 1.6 oz..Comes with 2 year warranty
StarTech.comĀ® SAT2M2NGFF25 M.2 SSD to 2.5" SATA III Adapter has aluminum and plastic enclosure for long lasting durability. Protects your M.2 NGFF SSD in any 2.5" application with protective housing. Adapter reduces your data transfer bottleneck with maximum file transfer speeds up to 6 Gb/s. Supports multiple drive heights like 2242/2260/2280 for wide compatibility with all of the common M.2 solid state drives..M.2 to SATA III adapter helps you to convert M.2 NGFF solid state drive into a standard 2.5" form factor.Measures 0.3"H x 2.7"W x 3.9"D.Comes in black color for new look.Has internal board form factor, data transfer rate of 6 Gb/s and supports solid state drive devices.Has fixed drive installation for convenience.Suitable for M.2 drive types.Has 1 drive for convenience.Supported 2242, 2260, 2280 drives.Features SATA III interface with 7+15 pin SATA data and power combo receptacle connector for good connectivity.Has aluminum and plastic enclosure for long-lasting strength.Allows you to add M.2 SSD performance to any computer system by converting M.2 to SATA.M.2 NGFF SSD comes with enclosed housing for protection in any 2.5in application.Operates at a temperature of 32 to 122 deg F, storage temperature of 14 to 185 deg F and humidity of 5 - 95percentage RH.Comes with M.2 NGFF SSD to 2.5" SATA adapter, SSD mounting kit, housing mounting kit, mini screw driver and instruction manual.Weighs 1.8 oz.Comes with 2 years warranty.StarTech.comĀ® Black SATA III adapter allows to convert M.2 NGFF solid state drive into a standard 2.5" form factor. Supports maximum data transfer rate of up to 6 Gb/s.
Startech.comĀ® 2 Port PCI express super speed USB 3.0 card adapter comes with an optional SATA power connector to deliver up to 900 mA of power per port. Card adapter includes a cable that can extend up to a distance 9.8' for easy access..1 - PCI Express x1 male.At the same peak in testing, UASP also showed up to an 80 % reduction in required processor resources.9.8'.Dimensions: 4.7"(H) x 2.6"(W) x 0.7"(D).Interface/ports: 2 x USB 3.0 A Female, 1 - SATA Power (15 pin) Plug.Form factor: Plug-in card.Hardware: Standard Profile (LP bracket incl.) card type, NEC - MicroPD720202 Chipset ID,.Temperature: 5 - 50 deg C (operating), -25 - 70 deg C (storage), Humidity: 20 - 80 % RH.Data transfer rate: 5 Gbps, Type and rate: USB 3.0 - 5 Gbit/s.Connect additional external hard drives, CD/DVD drives, MP3 players, printers, scanners, webcams, game controllers, digital cameras, etc. to a computer system.Expand the USB capabilities of your system with two additional external ports, upgrade an older PCIe-based system from USB 2.0 to USB 3.0 connectivity.For added versatility, the controller card is equipped with a standard profile bracket and includes a low-profile/half-height bracket for installation in small form-factor computers.USB 3.0 controller performs up to 70% faster than conventional USB 3.0 when paired with a UASP supported enclosure.Using a more efficient protocol than the traditional USB BOT, UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data-transfers.Includes 1 x PCI express USB 3.0 card, 1 x low profile bracket, 1 x driver CD, instruction manual.Compatibility: Windows 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64) Windows Server 2012, 2008 R2, 2003(32/64) Linux 2.6.31 or later.Weight: 1.4 oz..Warranty: 2 years limited.Startech.comĀ® 2 Port PCI express super speed USB 3.0 card adapter supports a maximum data transfer rate up 5 Gb/s to increases the efficiency and is compatible with PC as well as Linux platform.
The j5create USB Type-C to M.2 NVMe SSD enclosure easily connects the M.2 NVMe SSD to a USB Type-C or Thunderbolt 3 PC for file backup, disk upgrade, disk cloning, data recovery, and storage expansion. Compatible with four different sizes: M.2 NVMe SSD 2230/2242/2260/2280 (M key) solid-state drivers. Provides superfast (up to 900Mbps) read and write speed. Perfect for PCs with no M.2 socket available. Quick and easy installation: just use the included rubber fasteners to secure your M.2 SSD drive onto the board, no need for screws and screwdrivers. The case is made of smooth aluminum for heat dissipation. The aluminum shell has two side vent holes that are designed to enhance the cooling effect. With a blue LED indicator, you can easily see the status of the case. A constant light indicates device connection, and a flashing light indicates data transmission. Compatible with Windows, macOS, Linux, and ChromeOS. Plug and play, no driver required. A perfect companion for your laptop while on the go. Includes a USB Type-C cable..USB Type-C to M.2 NVMe SSD enclosure easily connects the M.2 NVMe SSD to a USB Type-C or Thunderbolt 3 PC for file backup, disk upgrade, disk cloning, data recovery, and storage expansion.Compatible with four different sizes: M.2 NVMe SSD 2230/2242/2260/2280 (M key) solid-state drivers.Supports NVMe SSD and is compatible with USB Type-C or Thunderbolt 3 USB 3.1 Gen 2 with 10Gbps speeds.Made of aluminum in a silver-tone finish and white plastic.Rubber retention peg can be adjusted to match any kind of M.2 NVMe SSD.Provides superfast (up to 900Mbps) read and write speed.Compatible with Windows, macOS, Linux, and ChromeOS.Plug-and-play installation with no driver required.Box contains: enclosure, USB Type-C to USB Type-C cable (0.98'), quick installation guide.2-year manufacturer limited warranty.ā WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The ToughArmor MB833MK-B V2 is a ruggedized removable M.2 NVMe SSD enclosure that fits a single external 3.5" drive bay of the computer system and supporting PCIe 4.0 64Gb/s data transfer rates via SlimSAS 4i (SFF-8654) interface and accepts all standard M.2 drives lengths from 30mm to 110mm (2230, 2242, 2260, 2280, 22110). It simplifies the process of installing or removing M.2 NVMe SSD by using the removable drive trays with tool-less adjustable M.2 drive locker, making it easy to change drives at any time without open the computer case or dealing with drive mounting screws. In addition, while working together with numbers of ventilation holes around the enclosure, each drive tray is equipped with a high efficiency aluminum heat sink to ensure your SSDs are at optimal temperatures. As part of ICY DOCK's toughest line, the MB833MK-B V2 is made out of full metal construction with metal barrel key locks for maximum protection..Rugged and removable SSD enclosure specially designed to fit into 3.5" drive bay of the computer system.Fits 1 x M.2 NVMe SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110).Installs into any standard external 3.5" device bay or floppy bay.Rugged, full-metal enclosure meets flammability requirements.Uses a SlimSAS 4i (SFF-8654) to connect, requires NVMe host.Supports the full NVMe bandwidth specification of 64Gbps.Adjustable drive locker holds all-length drives securely.Toolless drive installation design for easy drive maintenance and system upgrading.Integrated extra-large high-efficiency heat sink and ample ventilation for excellent passive cooling.Features a two-segment key lock for additional physical security.Eagle-hook tray latch securely holds the tray inside the enclosure.EMI Grounding ā protects SSDs from electrical damage.Anti-Vibration technology (AVT) reduces noise and protects against environmental damage.Active Power technology (APT) saves power by shutting the device down when no drive is installed.5-year manufacturer limited warranty
StarTech eight-port SATA III (6Gbps) controller enables you to add eight SATA 6Gbps hard drives (HDDs) or solid State Drives (SSDs) to your computer system or server via an available PCIe x4 card slot. The card supports SATA III and PCI-Express Gen 2 Specifications and four SATA controllers to deliver a high-performance data storage solution..PCI Express SATA expansion adapter card with four host controllers.Maximum data transfer rate is 6Gbps.Card type: standard profile (LP bracket incl.) with eight ports; internal ports: SFF-8087 (36 Pin, Internal Mini-SAS).OS compatibility: Windows 7, 8, 8.1, 10; Windows Server 2003, 2008 R2, 2012, 2012 R2, 2016, 2019; macOS 10.10 to 12; Linux 2.6.32 and up.2-year manufacturer limited warranty
Turn your PCIe M.2 NVMe or SATA AHCI M.2 SSD into a highly portable, USB-based external storage solution. This StarTech enclosure features USB 3.2 Gen 2x1 (10Gbps) with UASP support and PCIe 3.0 delivering real read/write data transfer speeds up to 1GB per second. Working with both PCIe and SATA based drives, this enclosure ensures compatibility with virtually any M.2 drive, supporting both M-Key (PCIe) and B+M-Key (SATA) drives sized 2230/2242/2260/2280. USB 3.2 Gen 2x1 10Gbps (also known as USB 3.1 Gen 2) is backward compatible with USB 3.1 Gen 1 5Gbps (also known as USB 3.0), USB 2.0, and USB 1.1..With compatibility for both PCIe NVMe and SATA based M.2 drives, this enclosure solves the common challenge of identifying which enclosure is compatible with your M.2 drive.For multiplatform support, this enclosure, which features a USB Type-C host connection, includes two different host cables: a USB Type-C to USB Type-C cable (20") and a USB Type-C to USB Type-A cable (10").Delivers USB 3.2 Gen 2x1 maximum theoretical throughput of 10Gbps, which is twice the throughput of USB 3.2 Gen 1x1 at 5Gbps.Supports PCIe 3.0 which when combined with an M.2 NVMe drive takes full advantage of the throughput available to USB 3.2 Gen 2x1.Features ventilation holes for maximum heat dissipation, ensuring your drive operates noiselessly at an optimal temperature to preserve performance and protect your drive from overheating damage.Designed for mobility, with a small form factor design that fits easily into your laptop bag.Supports driverless plug-and-play installation and hassle-free drive installation; screwdriver is included ensuring no additional tools are required.2-year manufacturer limited warranty
Add the fast performance of an M.2 NVMe SSD to your desktop computer or server by converting the drive through a U.2 (SFF-8639) compatible interface on your motherboard. This PCI Express M.2 to U.2 adapter makes it easy to install an M.2 PCIe NVMe SSD into your desktop PC or server, and connect to the drive through an available U.2 (SFF-8639) compatible interface on your motherboard.Upgrade your system cost-effectively.Increase your system speed and performance cost-effectively, by adding an M.2 PCIe NVMe SSD to your PC or server.Adapter supports one M.2 PCIe NVMe SSD (M-Key).U.2 (SFF-8639) host interface
This four-port SATA III (6Gbps) controller enables you to add four SATA 6Gbps hard drives (HDDs) or Solid State Drives (SSDs) to your computer system or server via an available PCIe x2 card slot. The card supports SATA III and PCI-Express 3.0 specifications..Add four SATA III 6Gbps ports to your desktop computer or server using a PCIe x2 slot to connect SATA drives (HDD/SSD).Enables the connection of four high-performance SATA 6Gbps drives with a combined total throughput of up to 16Gbps.The SATA drives are connected via four individual SATA ports located on the card (SATA cables sold separately).Widely supported across all popular operating system platforms including Windows (7, 8, 10, 11), macOS (10.10 and above) and Linux (2.6.32 and above).Supports port multiplier, giving you the ability to connect multiple drives to a single SATA port (additional hardware required, sold separately).Features plug-and-play installation and can be installed in a full-profile or low-profile computer systems with the full-profile bracket preinstalled, and an interchangeable low-profile (half-height) bracket included.Manage your drives and built RAID arrays with storage management systems such as Storage Spaces (Microsoft), RAID Assistant (macOS), mdraid/mdadm (Linux).2-year manufacturer limited warranty
StarTech.comĀ® Server network adapter card features two RJ-45 female Ethernet ports and offers full duplex support. Card offers a data transfer rate of 2000 Mbps for full-duplex transmission and 1000 Mbps for half-duplex transmission..Dimensions: 4.7"(H) x 0.7"(W) x 3.6"(L).Chipset ID: Realtek - RTL8111E, Asmedia - ASM1182E.Host interface: PCI-Express x1, Network technology: 10/100/1000Base-T- Gigabit Ethernet, Maximum data transfer rate: 2000 Mbps (full-duplex), 1000 Mbps (half-duplex).Interface/ports: 2 x RJ-45 network, Connector type: 1x PCI-Express x1 male.Form factor: Plug-in card.Device supported: Server.Performance: Auto MDIX, full-duplex support, Jumbo frame support: 9K max.Supported protocols: IEEE 802.1Q VLAN tagging, IEEE 802.1P layer 2 priority encoding and IEEE 802.3x full-duplex flow control.Card type: Standard Profile (LP bracket included), Port style: Integrated on card, Industry standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, PCI express base specification 2.0.Optional low-profile/half-height bracket that can be used for installation into a standard or small form-factor computer chassis.Indicators: LED: 2 - Green - Link/Activity, 2 - Yellow - Gigabit Mode.Software: OS Compatibility: WindowsĀ® 8.1 / 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000 WindowsĀ® Server 2012, 2008 R2, 2003(32/64), Mac OS 10.4 and up, Linux 2.4.x and up.System and cable requirements: Available PCI-Express slot.Environmental: Temperature: Operating: 0 deg C to 70 deg C (32 deg F to 158 deg F), Storage: 0 deg C to 100 deg C (32 deg F to 212 deg F), Humidity: 10 approx. 90% RH.Includes 1 x PCIe network card, 1 x low-profile bracket, 1 x driver CD, 1 x instruction manual.Weight: 1.8 oz..Warranty: 2 years limited.StarTech.comĀ® Server network adapter card contains two Ethernet ports and has a PCI express slot that allows you to connect it to client, server or a workstation.
This compact flash IDE adapter is a perfect solution for accessing CompactFlash (CF I, CF II) and IBM micro drive media, allowing you to access the flash/micro drive media as if it were an IDE hard drive..CompactFlash.Includes: Compact flash to IDE adapter, 3 1/2" enclosure, full profile expansion slot bracket, SP4 to LP4 molex power cable, instruction manual.Interface: 1 x 44 pin IDE/EIDE.Media supported: CompactFlash Type I, II, microdrive.Host connectors: 1 - IDE (40 Pin, EIDE/PATA) male, 1 - SP4 (4 pin, small drive power) male.Compatible slots: 1 x expansion slot, Compatible bays: 1 x front accessible - 3 1/2" x 1/3H.Use your compact flash card as a bootable and removable device.Excellent for swapping operating systems quickly without having to take your computer apart.Easily swap cards in and out with built in push button ejector.Easy to use jumpers offer simple master/slave drive setting.Can be mounted in the front or rear panel of your case, to fit into any 3 1/2" bay or available expansion slot.Temperature: - 67 to 185 deg F, Humidity: 5 to 85% RH.Certifications and standards: FCC, RoHS.Weight: 5.1 oz.Warranty: 2 years limited.StarTech Drive Bay Single CompactFlash Card Reader/Writer - Flashcard Accessibility
The StarTech ST1000SPEX43 4-port PCIe Gigabit network adapter card offers 4-channel networking and a maximum throughput of up to 1000 Mbps in each direction. It features the Realtek RTL8111G chipset for reliable network connections to your server or computer. This adapter supports full-duplex flow control, auto negotiation with next-page capacity, up to 9K jumbo frame, IEEE 802.1Q VLAN tagging, IEEE 802.1P layer 2 priority encoding, wake-on-LAN and remote wake-up. It is great for many SMB and enterprise applications such as virtualized environments that require multiple NICs..Network adapter card offers simultaneous access to multiple networks for desktop PC clients, servers and workstations.Dimensions: 0.7"H x 4.7"W x 5.4"D.Comes in yellow color.Interface/ports: one PCI express x four male, four RJ-45 female (external).Data transfer rate: 2000 Mbps (full duplex), Jumbo frame support: 9K max.Chipset ID: Realtek RTL8111G, Industry standards: Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab.Compatibility with Windows 10 (32/64), 8, 8.1, 7, Vista, XP, 2000, ME, 98SE, Windows Server 2012, 2003, Linux Kernel 2.4.x and up operating system.LED indicators: four link and four activity.System and cable requirements: Available PCI Express x4 or higher (x8, x16) slot.Temperature: 0 - 55 deg C (operating), -40 - 70 deg C (storage), Humidity: 5 - 95% RH.Contains one PCIe gigabit network card.Meets CE, FCC and RoHS certifications and standards.Weight: 3.5 oz..Comes with 2 years warranty
Startech.comĀ® Port PCI express superspeed USB 3.0 card adapter comes with an optional LP4 power connector to connect to your system power supply. Adapter expands the USB capabilities of your system with two extra external ports..1 x PCI express interface.Data transfer rate: 5Gbps.Ports: 2 x USB 3.0 (9-pin) female external-port, 1 x LP4 (4-pin) male internal-port.Form factor: Plug-in card.Connectivity technology: Wired.Dimension: 4.7"(H) x 0.7"(W) x 3.2"(L).Maximum cable length: 9.8'.Operating system: Windows 8/7/Vista/XP (32/64bit), WindowsĀ® Server 2012, 2008 R2, 2003 (32/64), Linux Kernel 2.6.31 or later.Platform supported: PC.Optional LP4 power connector provides up-to 900mA per USB port.Connect additional external hard drives, CD/DVD drives, MP3 players, printers, scanners, webcams, game controllers, digital cameras, etc. to a computer system.Fits into full or low-profile/small form factor (SFF) systems, with a dual-profile design.Improved performance with UASP support.Includes PCIe USB 3.0 card, low-profile bracket, driver CD, instruction manual.Certifications and standards: CE, FCC, RoHS.Weight: 1.8 oz..Warranty: 2 years limited.Startech.comĀ® Port PCI express superspeed USB 3.0 card adapter has data transfer speeds of up to 5Gb/s and delivers powers of up to 900 mA to USB 3.0 bus-powered devices.
The PEXUSB3S4V PCI express USB 3.0 Card (with SATA power) adds 4 external USB 3.0 ports to any PCI express-enabled computer system..PCI Express x1.Plug-in Card.4 USB Port(s).Form factor: Low profile plug in card.Platform supported: PC.Number of ports: 4.Operating systems: Windows XP (32/64 bit), Server 2003 (32/64 bit), Server 2008 R2, vista (32/64 bit), 7, (32/64 bit), 8 (32/64 bit).Card type: Standard profile.Chipset ID: NEC uPD720201.Connector type: 1 - PCI express x 1 male.Operating temperature: 5 to 50 deg C.Dimensions: 2.7"(H) x 0.7"(W) x 3"(L), 700 mil thickness.Internal ports: 1 - SATA power (15 pin) plug, external ports: 4 - USB 3.0 A (9 pin, superspeed) female.Optionally provides up to 900mA per USB port.Backward compatible with USB 2.0 and USB 1.0/1.1 devices.System and cable requirements: PCI express expansion slot.Package contents: 1 x PCI express USB 3.0 card, 1 x low profile bracket, 1 x driver CD, 1 x instruction manual.Weight: 1.6 oz..Certification and standards: Green compliant, ROHS, CE, FCC.Warranty: 2 years limited.StarTech.com Four-Port PCIe USB 3.0 Adapter Card - High Speed, Low Profile
Expand the storage capacity of your laptop or handheld gaming device with the Crucial 2TB P310 Gen 4 M.2 2230 PCIe NVMe SSD. For gaming enthusiasts looking for more room to store their favorite titles, the P310 gives you additional storage space with a 2TB capacity as well as read and write speeds up to 7100 and 6000 MB/s, respectively, backed by Micron 232L 3D TLC NAND memory. With 1.5-million hours Mean Time Between Failures (MTTF) and maximum 440TB endurance, you get long-lasting performance..Hard Drive 2TB Capacity SSD.M.2 PCIe 4.0 x4 Interface, Up to 7100 MB/s Read Speed, Up to 6000 MB/s Write Speed.Device Supported Handheld Gaming Console, Notebook.Compatibility Valve Steam Deck, ASUS ROG Ally, Microsoft Surface.Micron 232L 3D TLC NAND.Limited 5 Year Warranty