Portable Electric Heaters 240 Volts
16 results
The TPI ICH240C 13648 BTU rated construction site/utility fan forced electric heater in red color, features steel tubular heating element and internal overheat thermostat. The electric heater has coverage area of 400 sq ft. It operates at a voltage rating of 240/208 V, current rating of 16.7/14.4 A and power rating of 4000/3000 W. It is suitable for indoor applications..Dimensions: 12 3/4"H x 10 5/8"W x 10"D.Coverage area: 400 sq.ft.BTU: 13648.Voltage: 240/208 V, current: 16.7/14.4 A.Wattage: 4000/3000 W, number of phase: 1.Connection: 6' long cord set, 20 A plug NEMA #6-20P.Comes in red finish.Temperature rise: 43 deg F.Steel tubular heating element.Internal overheat thermostat.Temperature control thermostat.Weight: 15 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Red 13648 BTU 240 / 208 V construction site/utility fan forced portable electric heater features steel tubular heating element and internal overheat thermostat.
The TPI H474TMC 13106 BTU rated dual heat fan forced portable electric heater in beige color, features temperature control thermostat and manual reset type limit control. It operates at a voltage rating of 240 V, current rating of 8/16 A and power rating of 1920/3840 W. It includes 6' long 3 conductor cords and is suitable for indoor applications..Dimensions: 16"H x 16"W x 8-1/2"D.BTU: 13106.Voltage: 240 V, current: 8/16 A.Wattage: 1920/3840 W, number of phase: 1.Connection: 6' long three conductor cord.Comes in beige finish.Temperature control thermostat.Manual reset type limit control.Weight: 20 lbs..Heater will heat approx. 192 sq. feet or a 13.86 x 13.86 size room.Comes with 1 year warranty.3 conductor cord and Nema6-20P 20 amp plug.Plug does not fit standard socket.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Beige 13106 BTU 240 V dual heat fan forced portable electric heater features temperature control thermostat and manual reset type limit control.
The TPI Fostoria® OCH46240VSSE 6826 BTU rated quartz electric infrared heater in stainless steel color, has 24-gauge, corrosion resistant stainless steel construction for long-life durability. It operates at a voltage rating of 240 V, current rating of 8.3 A and power rating of 2000 W. The electric heater includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 48"H x 5 3/8"W x 6 1/2"D.BTU: 6826.Voltage: 240 V, current: 8.3 A.Wattage: 2000 W.Connection: Hard wire.Finish: Corrosion resistant stainless steel 24-ga housing.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Weight: 10 lbs..Comes with 1 year warranty.Includes adjustable mounting brackets, vertical mounting brackets, wire guards, bulb, thermostats, SCR controllers and power contactor panels.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Stainless steel 6826 BTU 240 V outdoor/indoor rated quartz electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.
TPI Fostoria Heat Wave™ FES09241C 30717 BTU rated portable electric salamander heater in yellow color, has steel construction for long-life durability. It includes finned tubular heating elements, magnetic contactor, high-limit thermal cutout switch/automatic reset and 10" wheels. The electric heater operates at a voltage rating of 240 V, current rating of 38 A and power rating of 9 kW. The heater enclosure has safety screens on both air intake and output openings. It is suitable for both indoor and outdoor applications..Dimensions: 29"H x 23"W x 28"D.BTU: 30717.Voltage: 240 V, current: 38 A.Wattage: 9 kW, number of phase: 1.Connection: 10' cable & straight blade range plug.Comes in yellow finish with steel construction.Temperature rise: 25 deg F, thermostat adjustment: 40 to 100 deg F.Long-life finned tubular heating elements.Magnetic contactor.High-limit thermal cutout switch/automatic reset.Fan only operation.10" wheels, 800 CFM.Heater enclosure with safety screens on both air intake and output openings.Includes wheels.Weight: 55 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Yellow 30717 BTU 240 V portable electric salamander heater features long-life finned tubular heating elements and high-limit thermal cutout switch / automatic reset.
The Fostoria FES portable electric heater from TPI Corporation provides clean, quiet, odor-free, fan-forced heat. It's designed to circulate room air continuously, gradually heating a confined space. The best results will be obtained when using this heater in smaller, insulated spaces. Its features include a yellow safety enclosure with front and rear safety screens, reliable stainless steel finned heating elements, a high-limit temperature switch with automatic reset, an automatic thermostat control with fan-only option, and a long-life motor and fan assembly with sealed bearings. This portable (FES) model comes mounted on a two-wheeled cart, with wheels designed to be easily pushed or pulled over uneven surfaces. All Fostoria FES models come fully assembled, except the handle is attached in a lowered shipping position when shipped from the factory..This portable fan-forced salamander heater provides temporary climate control for interior jobsite heating, as well as assisting drywall and building contractors in drying applications.Three-phase electric heater generates 800 cfm, making it a great alternative to propane and kerosene space heaters.Dimensions: 39"H x 27"W x 21"D; weight: 65 lbs..Maximum wattage: 15000W; maximum heat energy: 51195 Btu/hour.Intended for rooms up to 1500 sq. ft., gradually heating a confined space.Best results will be obtained when using this heater in smaller, insulated spaces and interior jobsites.High-limit temperature switch provides automatic reset.Meets or exceeds the Intertek and ETL standards.Heater housing has a textured yellow powder-coated finish and includes protective guards in a black finish on both the air intake and output openings.Long-life finned tubular heating elements.Control knob allows for fan-only operation and thermostat adjustment from 40 to 100 degrees Fahrenheit.This unit features a built-in rotating stop, allowing housing adjustments for up to 90 degrees from center axis.Includes an access panel for direct wiring connections.10"Dia. industrial heavy-duty wheels and handle for easy portability over all surface types.Optional 25' SO cord ready for plug attachment is available for order.Safe-operating unit: operate the unit overnight to elevate temperature.Made in the USA.Power properties: 240V, 36A.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The TPI Fostoria® Heat Wave™ FES10241CA 34130 BTU portable electric salamander heater in yellow color, has steel construction for long-life durability. It operates at a voltage rating of 240 V, current rating of 42 A and power rating of 10 kW. The electric heater features coverage area of up to 547.19 cu ft. It includes 10' cable, straight blade range plug, finned tubular heating elements, magnetic contactor, 10" wheels and high-limit thermal cutout switch/automatic reset. The heater enclosure has safety screens on both air intake and output openings. It is suitable for both indoor and outdoor applications..Dimensions: 39"H x 21"W x 27"D.Coverage area: Up to 547.19 cu.ft.BTU: 34130.Voltage: 240 V, current: 42 A.Wattage: 10 kW, number of phase: 1.Connection: 10' cable & straight blade range plug.Comes in yellow finish with steel construction.Temperature rise: 30 deg F, thermostat adjustment: 40 to 100 deg F.Long-life finned tubular heating elements.Magnetic contactor.High-limit thermal cutout switch/automatic reset.Fan only operation.10" wheels, 800 CFM.Heater enclosure with safety screens on both air intake and output openings.Includes wheels.Weight: 60 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Yellow 34130 BTU 240 V portable electric salamander heater features long-life finned tubular heating elements and high-limit thermal cutout switch / automatic reset.
TPI Fostoria Heat Wave™ FES15241A 51195 BTU rated portable electric salamander heater in yellow color, has steel construction for long-life durability. It includes finned tubular heating elements, magnetic contactor, high-limit thermal cutout switch/automatic reset and 10" wheels. The electric heater operates at a voltage rating of 240 V, current rating of 63 A and power rating of 15 kW. The heater enclosure has safety screens on both air intake and output openings. It is suitable for both indoor and outdoor applications..Dimensions: 39"H x 23"W x 27"D.Coverage area: 4266 sq.ft.BTU: 51195.Voltage: 240 V, current: 63 A.Wattage: 15 kW, number of phase: 1.Connection: 10' cable & straight blade range plug.Comes in yellow finish with steel construction.Temperature rise: 45 deg F, thermostat adjustment: 40 to 100 deg F.Long-life finned tubular heating elements.Magnetic contactor.High-limit thermal cutout switch/automatic reset.Fan only operation.10" wheels, 800 CFM.Heater enclosure with safety screens on both air intake and output openings.Includes wheels.Weight: 69 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Yellow 51195 BTU 240 V portable electric salamander heater features long-life finned tubular heating elements and high-limit thermal cutout switch / automatic reset.
The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..Portable infrared heater quickly heats up the room and provides you with the much-needed warmth.Single-phase electric wiring.Dimensions: 53"H x 20"W x 17.5"D; weight: 46 lbs..Maximum wattage: 9500W; maximum heat energy: 32414 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 375 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allows easy transport to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat-panel emitter operates at a radiant efficiency of 78.5% with 240V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emitter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 37.5"H x 20"W x 17.5"D; weight: 32 lbs..Maximum wattage: 4300W; maximum heat energy: 14972 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 150 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allow easy transportation to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 240V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emmiter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 37.5"H x 20"W x 17.5"D; weight: 32 lbs..Maximum wattage: 4300W; maximum heat energy: 14972 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 150 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allow easy transportation to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat-panel emitter operates at a radiant efficiency of 78.5% with 480V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emitter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 46.25"H x 11.5"W x 14.5"D; weight: 23 lbs..Maximum wattage: 3150W; maximum heat energy: 10749 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 125 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Can be easily transported to the worksite and connected to disconnect switches or lighting centers.Heater operates cleanly, emitting no fumes or odors.Aluminized steel base, large carry handle, and gold-tone anodized aluminum housing for efficient, long-term reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 240V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The TPI Fostoria® OCH57240VSSE 10239 BTU rated quartz electric infrared heater in stainless steel color, has 24-gauge, corrosion resistant stainless steel construction for long-life durability. It operates at a voltage rating of 240 V, current rating of 12.5 A and power rating of 3000 W. The electric heater includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 59"H x 5 3/8"W x 6 1/2"D.BTU: 10239.Voltage: 240 V, current: 12.5 A.Wattage: 3000 W.Connection: Hard wire.Finish: stainless steel.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers and power contactor panels.Weight: 12 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Stainless steel 10239 BTU 240 V outdoor/indoor rated quartz electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.
The TPI Fostoria® OCH57240VSSE 10239 BTU rated quartz electric infrared heater in brown color, has 24-gauge, corrosion resistant stainless steel construction for long-life durability. It operates at a voltage rating of 240 V, current rating of 12.5 A and power rating of 3000 W. The electric heater includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 59"H x 5 3/8"W x 6 1/2"D.BTU: 10239.Voltage: 240 V, current: 12.5 A.Wattage: 3000 W.Connection: Hard wire.Finish: brown.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Includes wire guards, thermostats, SCR controllers and power contactor panels.Weight: 12 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Brown 10239 BTU 240 V outdoor/indoor rated quartz electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.
The TPI Fostoria® OCH46240VE 6826 BTU rated quartz electric infrared heater in brown color, has high-temperature brown powder coating for long-life durability. It operates at a voltage rating of 240 V, current rating of 8.3 A and power rating of 2000 W. The electric heater includes wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 48"H x 5 3/8"W x 6 1/2"D.BTU: 6826.Voltage: 240 V, current: 8.3 A.Wattage: 2000 W.Connection: Hard wire.Finish: High-temperature brown powder coated.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Includes wire guards, thermostats, SCR controllers and power contactor panels.Weight: 10 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Brown 6826 BTU 240 V outdoor/indoor rated quartz electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.
The TPI Fostoria OCH57240VCE 6826 BTU rated quartz electric infrared heater in brown color, has high-temperature brown powder coating for long-life durability. It operates at a voltage rating of 240 V, current rating of 8.3 A and power rating of 2000 W. The electric heater includes wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 59"H x 5 3/8"W x 6 1/2"D.BTU: 6826.Voltage: 240 V, current: 8.3 A.Wattage: 2000 W.Connection: Corded.Finish: High-temperature brown powder coated.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Includes wire guards, thermostats, SCR controllers and power contactor panels.Weight: 13 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Brown 6826 BTU 240 V outdoor/indoor electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.
The Fostoria RPH from TPI Corporation is a line which provides protection against freezing for pump houses, utility rooms, relay stations, construction sheds, and more. It features a stainless steel heating element and single-pole thermostat with a range of 30 to 140 degrees Fahrenheit. Comes with a powder-coated epoxy steel case and aluminum fins. Overheat protection is ensured by a thermal fuse..This floor convection specialty heater provides protection against freezing.Features single-phase electric wiring.Dimensions: 4"H x 20"W x 5.5"D; weight: 5 lbs..Maximum wattage: 500W; maximum heat energy: 1706 Btu/hour.Protection against freezing for pump houses, utility rooms, relay stations, and construction sheds.Provides overheat protection: thermal fuse will instantly shut off the heater to prevent overheating.Meets or exceeds the Intertek and ETL standards.Comes with a stainless steel heating element and aluminum fins.Features a single-pole thermostat with a range of 30 to 140 degrees Fahrenheit.Case is made of steel with a powder-coated epoxy finish.Made in the USA.Power properties: 240V, 2.1A.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov