Rack Mountable Multi-Gigabit Ethernet Switches
4 results
The Netgear M4350-24F4V Series is a 1RU layer 3 managed switch with 24x 10GBASE-X SFP+ ports and 4x 25GBASE-X SFP28 uplinks. Equipped with one slot for modular power supply (1+1 redundancy). Supports Virtual Chassis stacking provides non-stop forwarding (NSF) and hitless failover, NETGEAR IGMP Plus, AV User Interface, and Engage Controller speed up AV installations..Layer 3 managed switch with 24 x 10GBASE-X SFP+ ports with 4 25GBASE-X SFP28 uplinks.1/10/25G Gigabit Ethernet line rate ensures congestion-free connectivity to your devices.1U height allows to mount it to your rack.Flexible management via easy-to-use web browser based management.Equipped with one slot for modular power supply (one-plus-one redundancy).Lifetime manufacturer limited warranty
Omada SG6654X, a L3 managed switch, offers L3 routing, swift 10 Gbps wired speed, stacking, and redundant power supplies, catering to convergence layer demands. It comes with 48Ć gigabit RJ45 ports, 6Ć 10 Gbps SFP+ slots, and physical stacking. Integrated with robust security and comprehensive management features, this switch ensures reliable performance for SMB, enterprise, and ISP networks..The TP-Link Omada SG6654X switch features 48 Gigabit Ethernet ports, providing ample connectivity for high-density networks. It belongs to the Multi-Gigabit performance class and operates as a fully managed switch, offering sophisticated control over network traffic and configuration..This switch supports Power over Ethernet (PoE), eliminating the need for additional power cables by supplying power directly through the Ethernet ports, making it convenient for powering PoE-enabled devices such as IP cameras and wireless access points..With a switching capacity of 216 Gbps and a forwarding rate of 160.7 Mpps, this switch ensures fast and reliable data transfer across your network, even in high-demand scenarios..The SG6654X is rack-mountable, making it easy to install in standard 19-inch network racks. This form factor is ideal for enterprise environments where space and organization are crucial..This switch does not offer wireless connectivity, focusing instead on providing high-performance wired network connections..It supports SNMP versions 1, 2c, and 3, allowing for seamless integration with network management systems for remote monitoring and management of network devices..The switch features Quality of Service (QoS) capabilities, including 802.1p and DSCP priority queuing, ensuring that critical traffic such as VoIP or video conferencing gets prioritized bandwidth for smoother performance..Advanced security features such as Access Control Lists (ACLs), 802.1X authentication, and IP-MAC-Port Binding ensure robust network protection. The switch also supports features like ARP Inspection and DoS defense to safeguard your network from malicious attacks..The switch operates in both Layer 2 and Layer 3 modes, supporting protocols like OSPF, RIP, and VRRP for dynamic routing, while ensuring excellent throughput for demanding applications..The SG6654X is designed with energy-efficient technologies, which automatically adjust power consumption based on link status and cable length, reducing operational costs without compromising performance..The switch adheres to IEEE 802.3ab/ae/z standards, ensuring compatibility with a wide range of networking equipment. It also complies with RoHS and CE certifications for environmental and safety standards..This product is not manufactured by a certified diverse organization, as no specific diversity designation (such as MBE) has been noted for this manufacturer..The switch supports stacking of up to 4 units, allowing network administrators to manage multiple switches as a single entity, thus simplifying network management and increasing scalability..Manufactured by TP-Link, a globally recognized leader in networking products, the Omada SG6654X is part of the Omada SDN platform, enabling centralized cloud management for flexible and efficient network control.
The HPE Aruba Networking CX 6200 switch Series delivers unparalleled visibility with built-in analytics for real-time monitoring and troubleshooting to help fix problems faster. The Aruba Network Analytics Engine (NAE) automatically interrogates and analyzes events that can impact network health. Advanced telemetry and automation provide the ability to easily identify and troubleshoot network, system, application, and security related issues easily through the use of Python agents and REST APIs..Layer 3 managed switch with 24 x Gigabit Ethernet and 4 x 1/10G SFP ports.128Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.1U height allows to mount it to your rack.Supports quality of service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management.Power consumption: 59W.Meets or exceeds the 80plus Silver, EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011 + A2:2013, EN 62368-1:2014 +A11:2017, CAN/CSA-C22.2 No. 60950-1-07, IEC 60950-1:2005, IEC 62368-1:2014 2nd Ed., and CNS-14336-1 standards.Managed switch delivers unparalleled visibility with built-in analytics for real-time monitoring and troubleshooting to help fix problems faster.Switch uses a fully distributed architecture with Aruba Gen7 ASICs that delivers very low latency, increased packet buffering, and adaptive power consumption; all switching and routing are wire-speed to meet the demands of bandwidth-intensive applications.Supports Aruba Dynamic Segmentation that automatically applies and enforces user, device, and application-aware policies on Aruba wired and wireless infrastructures.Enterprise-class connectivity with support for ACLs, robust QoS, and common protocols such as static and Access OSPF routing.Aruba Dynamic Segmentation enables enhanced security and simple access for users and IoT.Flexible, modular switch models support hot-swappable, redundant power supplies and fans for enhanced resiliency
The Aruba CX 6300 Switch Series is a flexible, and intelligent family of AOS-CX stackable switches ideal for access, aggregation, and data center top-of-rack (TOR) deployments. With a cloud-centric design that combines a fully programmable OS with the Aruba Network Analytics Engine, the Aruba CX 6300 extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX Mobile App verify that configurations are flawless and easy to deploy. A powerful Aruba Gen7 ASIC architecture delivers fast, non-blocking performance. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management. This flexible series has built-in highspeed uplinks and supports high density IEEE 802.3bt high power PoE with HPE Smart Rate multi-gigabit Ethernet for high speed APs and IoT devices..Layer 3 managed switch with 48 x Gigabit Ethernet and 4 x SFP/SFP+/SFP28/SFP56 ports.48 PoE+ ports (30W/port) provide power to connect your devices with a single wire.496Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.1U height allows to mount it to your rack.Compatible with SNMP v2c/v3 technologies.Supports quality of service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management.Throughput: up to 369Mpps.Automated device profiling, role-based access control, and Layer 7 firewall features deliver enhanced visibility and performance for a better overall experience for both IT and end-users alike.Aruba Virtual Switching Framework (VSF) allows you to quickly grow your network using high performance front plane stacking.Advanced telemetry and automation provide the ability to easily identify and troubleshoot network, system, application and security related issues easily, through the use of Python agents and REST API.Power-to-port airflow construction is designed for top-of-rack (TOR) and out-of-band-management (OOBM) data center deployments
You May Also Like
The Aruba CX 6300 Switch Series is a modern, flexible and intelligent family of stackable switches perfect for enterprise network access, aggregation, core and data center top of rack (ToR) deployments. Created for game- changing operational efficiency with built-in security and resiliency, the 6300 switches provide the foundation for high-performance networks supporting IoT, mobile and cloud applications. Built from the ground up with a combination of cutting-edge hardware, software and analytics and automation tools, the stackable 6300 switches are part of the Aruba CX switching portfolio, designed for today's enterprise campus, branch and data center networks. By combining a modern, fully programmable OS with the Aruba Network Analytics Engine, the 6300 switches provide industry leading monitoring and troubleshooting capabilities for the access layer. A powerful Aruba Gen7 ASIC architecture delivers performance and robust feature support with flexible programmability for tomorrow's applications. The Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management. This flexible series has built-in wirespeed 1GbE/10GbE/25GbE uplinks and supports high density IEEE 802.3bt high power PoE. HPE Smart Rate multi-gigabit Ethernet paves the way for high speed access points and IoT devices by delivering fast connectivity and high power PoE using existing cabling. Aruba Dynamic Segmentation extends Aruba's foundational wireless role-based policy capability to Aruba wired switches. What this means is that the same security, user experience and simplified IT management can be enjoyed throughout the network. Regardless of how users and IoT devices connect, consistent policies are enforced across wired and wireless networks, keeping traffic secure and separate..Modern, flexible and intelligent AOS-CX stackable switch perfect for enterprise access, aggregation and ToR data center deployments.This model has 24 x 10/100/1000 BASE-T PoE+ ports supporting up to 30W per port and 4 x 1/10/25G SFP ports.Manage via single pane of glass with Aruba Central across wired, wireless, and WAN.Throughput: 334 Mpps maximum; switching capacity: 448Gbps.Dimensions: 1.73"H x 17.4"W x 12.9"D.Power consumption: hibernation (0 rpm fan): 12W, idle: 52W, 100% traffic rate: 67W.Powered by quad core ARM Cortex A72 1.8GHz, 8 GBytes DDR4, 32 GBytes eMMC, and 8 MB Shared Packet Buffer Memory.Lifetime manufacturer limited warranty
The Aruba 6300M switch series is a modern, flexible, and intelligent family of AOS-CX stackable switches perfect for access, aggregation and data center top-of-rack (TOR) deployments. With a cloud-centric design that combines a fully programmable OS with the Aruba network analytics engine, the Aruba 6300M extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX mobile app verify that configurations are flawless and easy to deploy. A powerful Aruba Gen7 ASIC architecture delivers fast, non-blocking performance, meaning your network is ready for tomorrow's unpredictable demands. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management..Stackable switch is perfect for enterprise network access, aggregation, core and data center top-of-rack deployments.Features 48 x 10/100/1000BASE-T PoE+ and 4 x 1/10/25/50G SFP ports.Management security restricts access to critical configuration commands, provides multiple privilege levels with password protection, and local/remote syslog capabilities allow logging of all access.Throughput: 369Mpps.Dimensions: 1.73"H x 17.4"W x 15.2"D.Maximum power consumption: 88-96W with JL086A, JL087A, JL670A PSU; switching capacity: 496Gbps.Certifications and standards: Meets or exceeds UL, FCC standards.Allows for stacking of up to 10 switches, providing scale and simplified management.Stackable layer 3 switch with BGP, EVPN, VXLAN, VRF, and OSPF with robust security and QoS.Provides NetEdit support for automation, configuration, verification, and one-touch deployment with the mobile app.Offers redundancy and PoE customization with hot-swappable power supplies and fans.Memory and processor: 1.8GHz quad-core ARM Cortex-A72; 8GB DDR4 and 32GB eMMC with 8MB shared packet buffer memory.PoE+ ports supporting up to 30W per port.Switch has two fan tray slots and comes with one fan tray installed.Lifetime manufacturer limited warranty
The Aruba CX 6300 Switch Series is a modern, flexible and intelligent family of stackable switches perfect for enterprise network access, aggregation, core and data center top of rack (ToR) deployments. Created for game- changing operational efficiency with built-in security and resiliency, the 6300 switches provide the foundation for high-performance networks supporting IoT, mobile and cloud applications. Built from the ground up with a combination of cutting-edge hardware, software and analytics and automation tools, the stackable 6300 switches are part of the Aruba CX switching portfolio, designed for today's enterprise campus, branch and data center networks. By combining a modern, fully programmable OS with the Aruba Network Analytics Engine, the 6300 switches provide industry leading monitoring and troubleshooting capabilities for the access layer. A powerful Aruba Gen7 ASIC architecture delivers performance and robust feature support with flexible programmability for tomorrow's applications. The Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management. This flexible series has built-in wirespeed 1GbE/10GbE/25GbE uplinks. HPE Smart Rate multi-gigabit Ethernet paves the way for high speed access points and IoT devices. Aruba Dynamic Segmentation extends Aruba's foundational wireless role-based policy capability to Aruba wired switches. What this means is that the same security, user experience and simplified IT management can be enjoyed throughout the network. Regardless of how users and IoT devices connect, consistent policies are enforced across wired and wireless networks, keeping traffic secure and separate..Modern, flexible, and intelligent AOS-CX stackable switch perfect for enterprise access, aggregation, and ToR data center deployments.This model has 48 x 10/100/1000 BASE-T ports and 4 x 1/10/25G SFP ports.Manage via single pane of glass with Aruba Central across wired, wireless, and WAN.Throughput: 369 Mpps maximum; switching capacity: 496Gbps.Dimensions: 1.73"H x 17.4"W x 15.2"D.Power consumption: hibernation (0 rpm fan): 9W, idle: 56W, 100% traffic rate: 75W.Certifications and standards: Meets or exceeds the UL 60950-1 2nd Ed, FCC part 15 Class A standards.Powered by quad-core ARM Cortex A72 1.8GHz, 8GB DDR4, 32GB eMMC, and 8MB packet buffer memory.Equipped with 1 x USB Type-C console port, 1 x OOBM, 1 x USB Type-A host port, 1 x Bluetooth dongle to be used with CX mobile app.Lifetime manufacturer limited warranty
The Netgear M4300-48X switch delivers L2/L3/L4 and IPv4/IPv6 cost-effective services for mid-enterprise edge and SMB core deployments with unrivaled ease of use. Nonstop forwarding (NSF) virtual chassis architecture provide advanced High Availability (HA) with hitless failover across the stack. Intelligent Netgear IGMP Plus multicast allows for scalable Pro AV installations at Layer 2 without the PIM complexity. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing ā as standard. The Netgear M4300 Switch Series is perfect for wireless access, unified communications and professional AV-over-IP installations. Netgear Intelligent Edge Switch solutions combine latest advances in hardware and software engineering for higher flexibility, lower complexity and stronger investment protection, at a high-value price point..Stackable managed switch for midsize organization networks.Features 48 x 10GBASE-T (RJ-45), 4 x 10GBASE-X (SFP+) shared ports, out-of-band 1G Ethernet management port, Mini-USB and RJ45 RS232 console ports, USB storage port.960Gbps non-blocking fabric across 48 ports.Dimensions: 1.73"H x 17.32"W x13.58"D.Maximum power consumption: 237.2W.Full-width form factor with one-unit rack mount kit.Full L3 feature set and nonstop forwarding (NSF) stacking.Ships with one modular APS250W PSU in first power supply slot.Ship with a blank cover in the second power supply slot.Low acoustics (40.3dB at 77 degrees Fahrenheit).Lifetime manufacturer limited warranty
The Aruba CX 6100 Switch Series is a modern family of entry level access switches perfect for branch offices, mid-market enterprise, and SMB networks. Designed for reliable, simple, and secure access, the Aruba CX 6100 switches provide a convenient wired access solution for enterprise networks supporting IoT, mobile, and cloud applications. Prepare your network for tomorrow's unpredictable demands with a powerful Aruba ASIC architecture and programmable AOS-CX operating system used across the Aruba CX portfolio to deliver a more consistent, more efficient operator experience. This layer 2 switch series has convenient built-in high speed uplinks with up to 370W of IEEE 802.3at Class 4 PoE to support IoT devices such as security cameras and wireless APs.With robust QoS, support for static routing, and IPv6, the Aruba CX 6100 also simplifies ownership with no switch software licensing requirements..Simplify IT operations with managed Gigabit Ethernet rack mountable switch that provides entry level, reliable, and convenient wired access connectivity.48 10/100/1000BASE-T port model with 4 convenient built-in 1/10 GbE SFP port uplinks and up to 370W of Class 4 PoE.Flexibility to manage and simplify configurations with Aruba Central, Aruba NetEdit, easy to use Web GUI, or industry standard CLI.Throughput: 98.6Mpps.Dimensions: 1.73"H x 17.4"W x 12"D.Power consumption: 30.6W idle, 45W without PoE, 480W with PoE.Using Aruba AOS-CX operating system across Aruba CX switching platforms and deployment domains provides a simpler, more consistent operator experience.Delivers Layer 2 capabilities with support static routing, ACLs, robust QoS, traffic prioritization, sFlow, and IPv6 support.Simplifies ownership with no switch software licensing or subscriptions required.Designed with Aruba ASICs that deliver very low latency, increased packet buffering, and adaptive power consumption
The Aruba 2930F switch series is designed for customers creating smart digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. This convenient Layer 3 network switch includes built-in uplinks and PoE power and is simple to deploy and manage with advanced security and network management tools like Aruba ClearPass policy manager, Aruba AirWave, and cloud-based Aruba Central. This switch provides a convenient and cost-effective access switch solution that can be quickly set up with zero touch provisioning. The robust Layer 3 feature set includes a limited lifetime warranty..Fanless 12-port Gigabit Ethernet managed switch provides performance and ease of use for enterprise campuses, SMBs, and branch offices.Features 12 x RJ45 auto-sensing 10/100/1000 PoE+ ports, 2 x RJ45 auto-sensing 10/100/1000 ports, 2 x SFP+ 1/10GbE ports, and a dual-personality RJ45 serial console port.Switching capacity: 68Gbps.Comes in a 1U rack-mountable design.Power rating: 170W (maximum), 20W (idle).Supports advanced security and network management via Aruba ClearPass policy manager, Aruba AirWave, and Aruba Central.Throughput: up to 41.7Mpps.Maximum power consumption: 170 W (139W PoE+ power).Meets or exceeds the DoE VI, UL/CUL, and FCC CFR 47 Part 15 Class A standards.MAC address table size: 32768 entries.Packet buffer size: 12.38MB.Features a dual-core ARM Cortex A9 1016MHz CPU, 1GB DDR3 SDRAM, and 4GB eMMC memory.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 40x gigabit Ethernet and 8x 10Gbps SFP+ ports engineered for 1Gb AV over IP.40 PoE+ ports (30W/port) provide a total of 960W of power, so you can power and connect your devices with a single wire.240Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
The Aruba CX 6100 Switch Series is a modern family of entry level access switches perfect for branch offices, mid-market enterprise, and SMB networks. Designed for reliable, simple, and secure access, the Aruba CX 6100 switches provide a convenient wired access solution for enterprise networks supporting IoT, mobile, and cloud applications. Prepare your network for tomorrow's unpredictable demands with a powerful Aruba ASIC architecture and programmable AOS-CX operating system used across the Aruba CX portfolio to deliver a more consistent, more efficient operator experience. This layer 2 switch series has convenient built-in high speed uplinks with up to 139W of IEEE 802.3at Class 4 PoE to support IoT devices such as security cameras and wireless APs. A compact and fanless 12 port model is perfect for use in quiet work spaces. With robust QoS, support for static routing, and IPv6, the Aruba CX 6100 also simplifies ownership with no switch software licensing requirements..Simplify IT operations with managed Gigabit Ethernet rack mountable switch that provides entry level, reliable, and convenient wired access connectivity.12 10/100/1000BASE-T port model with 2 convenient built-in 1/10 GbE SFP port uplinks and up to 139W of Class 4 PoE.Flexibility to manage and simplify configurations with Aruba Central, Aruba NetEdit, easy to use Web GUI, or industry standard CLI.Throughput: 45.1 Mpps.Dimensions: 1.73"H x 10"W x 10.04"D.Power consumption: 16W idle, 21.9W without PoE, 170W with PoE.Using Aruba AOS-CX operating system across Aruba CX switching platforms and deployment domains provides a simpler, more consistent operator experience.Delivers Layer 2 capabilities with support static routing, ACLs, robust QoS, traffic prioritization, sFlow, and IPv6 support.Simplifies ownership with no switch software licensing or subscriptions required.Designed with Aruba ASICs that deliver very low latency, increased packet buffering, and adaptive power consumption
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 40x gigabit Ethernet and 8x 10Gbps SFP+ ports engineered for 1Gb AV over IP.40 PoE++ ports (90W/port) provide a total of 2880W of power, so you can power and connect your devices with a single wire.240Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cords, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 26x gigabit Ethernet and 4x 10Gbps SFP+ ports engineered for 1Gb AV over IP.24 PoE+ ports (30W/port) provide a total of 480W of power, so you can power and connect your devices with a single wire.132Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 40x gigabit Ethernet and 8x 1Gbps SFP ports engineered for 1Gb AV over IP.40 PoE+ ports (30W/port) provide a total of 480W of power, so you can power and connect your devices with a single wire.96Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
The Transition NetworksĀ® SISPM1040-384-LRT-C gigabit Ethernet managed switch is suitable for powering and connecting devices in hardened environments. This switch with 8 POE ports and 4 SFP ports, supports jumbo frames up to 9.6K bytes and supports G.8031 Ethernet linear protection switching. This black switch simultaneously supplies power to all the 8-ports, up to 30 W for each port. The hardened switch is perfect for factory floors, outdoor enclosures or other challenging environments. It includes embedded Device Management System (DMS) software, which provides advanced tools required for management of all IP addressable devices..Gigabit Ethernet managed switch is suitable for connecting and powering devices in hardened environments.8 x 10/100/1000Base-T PoE+, 4 x 100/1000Base-X SFP ports, RJ-45 serial console.Management: VLAN, Private VLAN Edge, Voice VLAN, GVRP, Web, SNMP v1,v2c,v3, Telnet, CLI, DMS, security: HTTPS/SSH v1/v2, IP source guard.Backplane: 24 Gbps.Dimensions: 5.4"H x 2.4"W x 5.3"D.Power consumption: 11 W (Max) without PoE.Meets EMI, CE, FCC Part 15, EN61000-4-2, EN61000-4-3, EN-61000-4-4, EN61000-4-6, IEC60068-2-32, EN50155, EN50121-4, NEMA TS-2, IEEE1613 standards.Power supply: 24 VDC, 1 A digital output, 48 to 57 VDC input.VLANs: 4000.Protocols: Supports LLDP, TCP/UDP source, DSCP/IP precedence.Indicators: Status LEDs - system, power 1, ring master, coupling, power 2, alarm, port status.Mac address: 8K, jumbo frames: 9.6KB.Layer supported: 2, color: Black.Temperature rating: -40 to 75 deg C operating, -40 to 85 deg C (storage), humidity: 5 to 95% (non-condensing).Weight: 2.2 lbs..Comes with 5 year warranty.Black 8-port gigabit Ethernet managed switch supports Jumbo frames up to 9.6 KB, LLDP protocol, port mirroring and port based network access control.
Cisco Catalyst 9300 Series switches are Cisco's lead stackable enterprise access switching platform and as part of the Catalyst 9000 family, are build to transform your network to handle a hybrid world where the workplace is anywhere, endpoints could be anything, and applications are hosted all over the place. The Catalyst 9300 Series, including the new Catalyst 9300X models, continues to shape the future with continued innovation that helps you reimagine connections, reinforce security and redefine the experience for your hybrid workforce big and small..Stackable managed Gigabit Ethernet switch.Equipped with 24 x Gigabit Ethernet ports with full PoE+ support and 4 x Gigabit fixed uplinks.Forwarding rate: 41.66Mbps, switching capacity: 56Gbps.Dimensions: 1.73"H x 17.5"W x17.7"D.505W available PoE power with single primary power supply.Based on the Cisco UADP 2.0 Application-Specific Integrated Circuit (ASIC) with programmable pipeline and microengine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.Features x86 CPU complex with 8GB memory, and 16GB of flash and external USB 3.0 SSD pluggable storage slot (delivering up to 240GB of storage with an optional SSD drive) to host containers.USB 2.0 slot to load system images and set configurations.Intelligent Power Management with Cisco StackPower technology, providing power stacking among members for power redundancy.IPv6 support in hardware, providing wire-rate forwarding for IPv6 networks.Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-to-IPv6 migration.Cisco IOS XE, a modern operating system for the enterprise with support for model-driven programmability including NETCONF, RESTCONF, YANG, on-box Python scripting, streaming telemetry, container-based application hosting, and patching for critical bug fixes.Plug-and-Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts, or updates to an existing network.Advanced security: Encrypted Traffic Analytics (ETA), support for AES-256 with the powerful MACsec 256-bit encryption algorithm, hardware anchored Secure Boot and Secure Unique Device Identification (SUDI) support for Plug and Play, to verify the identity of the hardware and software.Perpetual licensing package includes the Network Essentials licensing option that is tied to the hardware.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 26x gigabit Ethernet and 4x SFP ports engineered for 1Gb AV over IP.24 PoE+ ports (30W/port) provide a total of 300W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
Cisco Catalyst 9300 Series switches are Cisco's lead stackable enterprise access switching platform and as part of the Catalyst 9000 family, are build to transform your network to handle a hybrid world where the workplace is anywhere, endpoints could be anything, and applications are hosted all over the place. The Catalyst 9300 Series, including the new Catalyst 9300X models, continues to shape the future with continued innovation that helps you reimagine connections, reinforce security and redefine the experience for your hybrid workforce big and small..Managed 24-port Gigabit Ethernet switch offers simplicity without compromise: secure, always on, and IT simplified.Equipped with 24 x 10/100/1000 PoE+ ports and four 10 Gigabit/1 Gigabit SFP+.Switching capacity: up to 128Gbps or up to 448Gbps with stacking.Made in rack-mountable form factor.Facilitates remote management with SNMPv1/v2c/v3 management station that discovers and monitors the switch.Quality of service (QoS) and flow control for improved network efficiency.Dimensions: 1.73"H x 17.52"W x 19.21"D
The Aruba CX 4100i switch series is a modern family of ruggedized Ethernet switches ideal for connecting IoT, access points, and user devices in harsh environments. Created for high performance, reliable, and access with enhanced security, the Aruba CX 4100i switches provide versatile deployment options for enterprise networks extending beyond carpeted areas to challenging outdoor and industrial spaces. Based on the programmable AOS-CX operating system used across the Aruba CX portfolio, this IP30 ruggedized series helps deliver a more consistent, more efficient operator experience. This Layer 2 series has convenient built-in high-speed uplinks, supports both 30W and 60W PoE, and is ready for deployment with fan less 12 port DIN mount and 24 port 1U rack mount models. With robust QoS, support for static routing, and IPv6, the Aruba CX 4100i also simplifies ownership with no switch software licensing requirements..High-performance ruggedized Ethernet switch is great for connecting IoT, access points, and user devices in harsh environments..Features 4 x 100M/1G BaseT Class 6 PoE ports supporting up to 60W per port, 20 x 100M/1G BaseT Class 4 PoE ports supporting up to 30W per port, and 4 x 1G/10G SFP ports.Switching capacity: up to 128Gbps; routing throughput: up to 95Mpps.Mounts to an EIA/TIA standard 19" telco rack (mounting brackets included with product).SNMPv1/v2c/v3 support provides read capability of industry-standard Management Information Base (MIB), and private extensions.With robust QoS, support for static routing, and IPv6, it also simplifies ownership with no switch software licensing requirements.Management flexibility with support for Aruba Central, easy-to-use Web GUI, CLI, and Aruba NetEdit.Fixed internal power supply (300W); power consumption is 23W.Versatile form factors deliver both 30W and 60W PoE to optimize IoT power.Built-in high-speed 1/10GbE uplinks for demanding applications.Robust protection for sub-station applications and high tolerances for railway rolling stock, signaling and telecommunications.Secure and simple access for IoT and users with Aruba Dynamic Segmentation.Management flexibility with support for Aruba Central, easy-to-use Web GUI, CLI, and Aruba NetEdit.No switch software licensing required.5-year manufacturer limited warranty