Serial To IP Converter

Brainboxes Ethernet to DIO 8 digital inputs and 8 digital outputs + serial port supports factory floor process control and has integrated DIN rail mount. Port controls any input or output from TTL to high voltage high current industrial devices..Dimensions: 128 mm(H) x 22.6 mm(W) x 102 mm(D).For device with a web browser, Microsoft Windows 8 editions/server 2012/server 2008 R2/server 2008/Vista/server 2003/XP/2000, Android, iOS, Mac OS X, Linux operating systems.Control any input or output from TTL to high voltage high current industrial devices.Interfaces/ports: 1 x network (RJ-45)-port, 1 x serial-port.Power: Unregulated 5 - 30 VDC, reverse polarity protection, 2.5 W max power consumption.Media type supported: Twisted pair.Ethernet technology: Fast ethernet, Network standard: 10/100BASE-TX.Form factor: Rail-mountable.Isolation: 1500VRMS magnetic isolation from ethernet.Tx/Rx FIFO size: 2048/2048, Watchdog: Active high/low, pulsed high/low.Operating distance: 4000'.Operating temperature: -30 - 80 deg C, Ambient relative humidity: 5 - 95% (non-condensing).Network enable your NuDAM/ADAM modules.Factory floor process control and automation.Removable screw terminal blocks make installation easier and quicker.Colour coded blocks and-ports prevents incorrect connection, numbered-pins simplifies wiring and removes confusion.Includes ED-588 ethernet to digital IO 8 inputs plus 8 outputs, installation CD (manual, Microsoft signed drivers and utilities, quick start guide).Compliant and standards: RoHS, WEEE, CE, CCC-Mark, C-Tick.Weight: 18.17 oz..Warranty: Lifetime limited.Brainboxes Ethernet to DIO 8 digital inputs and 8 digital outputs + serial port supports fast Ethernet technology and has rail-mountable form factor.

The Ethernet to Serial Adapter supports data transfer rates of up to 10/100 Mbps..Interface Ethernet.Ports 1 x RJ-45 network port, 2 x serial port.Number of ports 2.Operating systems Windows® 7 (32- 64-bit), Vista (32- 64-bit), XP (32- 64-bit), Server 2003 & 2008 (32- 64-bit), Server 2008.Ethernet technology Fast Ethernet.Network standard 10 100Base-TX.Connector type 9 pin male (DB-9).Operating Temperature 0 to 55 deg C.Dimensions 1.10"(H) x 49"(W) x 42"(L).4 PCB layers.Power consumption 0.92W typical.Flow control RTS CTS, DSR DTR, Xon Xoff.Data bits 5,6,7 or 8, Stop bits 1, 2.Package contents ES-257 ethernet to serial device server, installation CD including manual, microsoft signed drivers & utilities, power supply.Weight 0.515 kg.Certification and standards Green compliant, FCC, WEEE, RoHs.Warranty Lifetime limited.Warranty Lifetime limited.Brainboxes ES-257 2 Port Ethernet to Serial Adapter card provides a simple, instant cable replacement providing network integration.

The UDS1100 Device Server with PoE enables users to connect, manage and control just about any piece of equipment with a serial port from virtually anywhere over Ethernet or the Internet..Ports: 1 x RJ 45, 1 x DB 25.Dimensions: 3 1/2"(H) x 2 1/2"(W) x 0.9"(D).Compatibility: PC.Form factor: Wall mountable, Processor speed: 48 MHz.Ethernet technology: Fast ethernet, Data link protocol: Ethernet, fast ethernet, RS 232, RS 422, RS 485.Interface/ports: 1 x serial - RS 232/422/485 - 25 pin D Sub (DB 25), 1 x network / power - Ethernet 10base T/100Base TX - RJ 45.Connectivity technology: Wired.Status indicators: Link activity, power, status.Standard memory: 256 KB, Memory technology: SRAM, Flash Memory installed (Max): 2 MB.Operating temperature: 41 - 122 deg F.Input voltage: 30 VDC.Software selectable RS232, RS422 or RS485, flow control, DHCP support, ARP support, half duplex mode, full duplex mode.Network protocols: TCP/IP, UDP/IP, ICMP/IP, Remote management protocol: SNMP, Telnet, HTTP.Certificate and standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3af, UL, CSA, FCC, CE, TUV, C Tick, C Tick.Weight: 7.05 oz..Warranty: 2 years limited.Latronix Device Server with PoE - Simplicity and Speed

Brainboxes ED-516 16 Digital input device server is well suited as RS485 Gateway for connecting with industry standard NuDAM, eDAM and ADAM modules. Server has 16 non-isolated digital input channels for better performance. Server is implemented using Windows COM port driver that is compatible with all PC packages. Server has latched inputs that stay true until acknowledged. Provides user programmable count that is positive or negative transitions of up to 100Hz. Has RJ45 Jack 10/100 MHz autosensing, cross over autosensing type network ports. Server has ICMP, IP, TCP, DHCP, HTTP network protocols. Provides 1500 V magnetic isolation between ports and network for better protection. Server is compatible with Microsoft Windows 8, Microsoft Windows 7, Windows Server 2008 and more..Measures 5" x 0.9" x 4".Features network RJ-45, serial ports for reliable connectivity.Rail-mountable form factor.Offers fast ethernet and 10/100Base-TX network for quicker operation.Offers twisted pair connectivity.Supports ICMP, IP, TCP, DHCP, HTTP network protocols for reliable connection.Has 5 - 30VDC input power and is reverse polarity protected as well as operates at an input voltage of 35 V.Works smoothly on Microsoft Windows 8 32 bit & 64 bit and 7 32 bit & 64 bit operating system.Has an operating temperature of -30 to +80 deg C and storage temperature of -40 to 85 deg C.Meets RoHS, CE, TAA, CCC-Mark and C-Tick certification/standards.Weighs 4.8 oz.Operating systems: Microsoft Windows 8/7/ (32-bit/64 bit), Windows Server 2003/2008/Vista/XP (32-bit/64 bit).Monitor any input from TTL to high voltage high current industrial devices, RS485 gateway for connecting to Industry standard NuDAM, eDAM and ADAM modules.Removable, numbered, colour coded screw terminals.Includes: Installation CD including manual, Microsoft signed drivers & utilities, quick start guide.Certifications and standards: CE, CCC-Mark, C-Tick, RoHS, WEEE, Green compliant.Weight: 4.8 oz..Warranty: Lifetime.Brainboxes Ethernet to 16 digital input device server helps to monitor any input from TTL to high voltage high current industrial devices. Comes with rail-mount form factor.

The Silex Technology SD-300-US wired serial device server allows you to connect and share serial devices on a network. Silex offers a reliable way to connect to your RS-232 serial devices. The provided serial port emulator software allows for easy integration with existing PC applications. Virtually any client device can remotely control andmonitor your server including computers, mobile devices and virtual servers like VMware, citrix, Microsoft terminal server and hyper-v..Desktop wired device server for maximum flexibility in any environment.Dimensions: 0.9"H x 4.9"W x 3"D.Wired, 10/100Base-TX Fast Ethernet connectivity.Operating system: Windows 2000/Server 2003 (32/64-bits)/Server 2012 (32/64-bits)/Vista / 7 / 8 / 8.1 (64-bit versions)/XP (32/64 bits).Power supply: 5 VDC, 0.45 A AC adapter, Power consumption: 2.25 W.Meets VCCI Class B, FCC Class B, ICES-003 Class B, CE Class B standards.Interface: RS-232C, 1 x serial port, 1 x Network (RJ-45).Easily connect and share RS-232 serial devices on wired or wireless networks, Access, monitor and control equipment over Ethernet or Wi-Fi.Media type supported: Twisted pair.Temperature: 0 - 50 deg C (operating), -20 - 70 deg C (storage), Humidity: 20% - 80% RH (non-condensing) (operating), 20 - 90% RH (storage).Includes body, AC adapter, setup guide, rubber feet, GPL inquiry sheet, warranty card

Digi One IA provides reliable, cost-effective network connectivity for virtually any serial device. This unobtrusive and easy-to-use serial server delivers serial-to-Ethernet connectivity to Programmable Logic Controllers (PLCs), Remote Terminal Units (RTUs), process and quality equipment, bar-code readers and other industrial devices..Network (RJ-45): Yes.Serial Port: Yes.Number of Network (RJ-45) Ports: 1

Add serial communication support to a Small Form Factor (SFF) or full-size system, using this two-port serial card. RS-232 (DB9) support enables control and communication with serial peripheral devices..Dual port PCIe to RS232 (DB9) Serial card with 16C1050 UART.Supports small form factor (SFF) or full-size systems; contains two DB9 (nine-pin, D-sub) male ports.Perfect for legacy system upgrades in a wide range of applications for logistics, manufacturing, and freight sectors, and the IT industry, such as POS equipment, security systems, A/V installations, and more.Features support for high-performance 16C1050 UART on both DB9 male ports.Monitor activity with the built-in LED status lights on the PCI express DB9 card.2-year manufacturer limited warranty

This RS232 Serial Adapter Card lets you add an RS232 DB9 serial port to your computer through a PCI Express (PCIe) slot. It enables you to interact with serial devices such as card readers, printers, PIN pads, and modems, at speeds of up-to 921.4Kbps. With broad OS support, including for Windows and Linux, this PCI Express card is easy to integrate into mixed environments. The card comes pre-configured with a low-profile bracket, and includes an optional full-profile bracket, so installation is easy regardless of the case form factor..One-port RS232 serial adapter card with 16950 UART.Dimensions: 3.9"H x 2.6"W x 5.9"D.Features one PCI Express x1 male, one DB-9 (9-pin, D-sub) male, and one LP4 (4-pin; large drive power) male input.Meets or exceeds RoHS and REACH standards.Offers to add RS232 DB9 capabilities without purchasing a new server or computer.Maximizes case form factor integration with a low-profile or full-profile bracket.High-speed data transfer rates up to 921.4KB/s.Supports 256-byte depth FIFO per transmitter and receiver.Weight: 1.6 oz..Card type: low profile.Chipset ID: ASIX AX99100.Interface: serial.Compatible with Windows 7, 8, 8.1, 10; Windows Server 2003, 2008 R2, 2012, 2012 R2, 2016; Linux 2.4.x to 2.6.x LTS versions only.Lifetime manufacturer limited warranty

StarTech.com® 2 Port network card provides redundant connectivity to ensure an uninterrupted network connection and includes RJ-45 interface. Network card is fully compatible with IEEE 802.3/u/ab standards for 10/100/1000 Mbps auto-negotiation..Network adapter interface: PCI express x 4.Network adapter speed: 2000 Mbps, 1000Mbps.Full duplex capability, wake on LAN, auto-uplink, jumbo frames support, teaming support, large send offload, TCP segmentation offload, tagged VLAN, checksum offload support.Network adapter ports: 2 x RJ-45.Media type supported: Twisted pair.Controller processor: Intel I350-AM2.Network technology: 10/100/1000Base-T.System requirements: Windows 8.1 (32/64bit), 8 (32/64), 7 (32/64), vista(32/64), XP(32/64) Windows Server 2012, 2008 R2, 2003(32/64) Linux 2.4.x/ 2.6.x.Cabling technology: 10/100/1000Base-TX Ethernet.Data link protocols: 10MB LAN, 100MB LAN, Gigabit LAN, network / transport protocols: TCP/IP, UDP/IP.Form factor: Plug-in card, chipset ID: Intel - I350-AM2.Connectivity technology: Wired, Port style: Integrated on card, LED indicators: Link/activity.Compatibility: PC.Dimensions: 4.8"(H) x 0.7"(W) x 2.6"(D).Operating temperature: 32 - 122 deg F, storage: -4 - +140 deg F, humidity: 5 - 85% RH.Cable requirements: Available PCI express x4 or higher (x8, x16) slot, supported protocols: IEEE 802.3ad (link aggregation), IEEE 1588 (time sync) / 802.1AS, IEEE 802.1q (VLAN tagging), auto MDIX and full duplex support.Includes 2-port network card, 1 x low profile bracket, 1 x driver CD, 1 x instruction manual.Complaints and standards: FCC, CE, IEEE 802.1q/AS, IEEE 1588, IEEE 802.3/u/ab/ad, PCI express base specification 2.1, RoHS, green compliance.Weight: 2.8 oz..Warranty: 2 years limited.StarTech.com® 2 Port network card is ideal for VM environments with multiple operating systems, requiring shared or dedicated NICs and supports twisted pair media.

Startech.com® PCI express serial card contains full profile bracket with dual-profile plug-in card form factor and has 16550 type UART. Card features 1 x 9-pin DB-9 male RS-232 serial external ports with data transfer rate of 460 Kbps..PCI-express.Data transfer rate: 460 Kbps.Ports: 1 x 9-pin DB-9 male RS-232 serial external.Dimensions: 0.8"(H) x 3.1"(W) x 4.1"(L).Form factor: Dual-profile plug-in card.Serial protocol: RS-232, FIFO: 128 bytes.Chipset ID: ASIX/MosChip - MCS9922CV-AA.Max baud rate: 460.8 Kbps, UART type: 16550.Bus type: PCI-express, card type: Low profile, Port style: Integrated on card.Pre-configured for low profile/half-height systems but includes a full profile bracket for versatility.Native single chip, single lane PCI-express offers increased performance, for up to 48% less cpu load.Easy to install and use with full step-by-step instructions saving time and hassle.Environmental condition: Operating temperature: -10 to 80 deg C, Humidity: 5 - 95% RH.Platform supported: PC.Operating system: Windows 8/7/Vista/XP/XP Embedded/CE 5.0/6.0/2000/98SE/95/Server 2012/2008 R2/2003, Mac OS 10.4 and up, Linux kernel 2.6.x.Includes 1 x 1 port PCI-express serial card, 1 x full profile bracket, 1 x driver CD, 1 x instruction manual.Certifications and standards: RoHS, Green Compliant.Weight: 1.8 oz..Warranty: 2 years limited.Startech.com® PCI express serial card is constructed using a native single chip design that lets you harness the full capability offered by PCI express and is supported by PC platform.

Lantronix® XSDR22000-01 XPress-DR+ 4-Port Industrial device server enables users to remotely configure, monitor and control PLCs, drives, motion controllers, power equipment, barcode scanners and other serial devices from anywhere over the Net. It provides complete access and control of virtually any type of equipment with a serial port..XPress-DR+ industrial device server allows users to remotely configure, monitor and control PLCs.Measures 2.2"H x 4.8"W x 3.5"D.Runs on Lantronix DSTNI-EX 48 MHz processor for reliable performance.Has 256KB SDRAM with 2MB flash and 2KB EEPROM memory for optimum storage.Has 4 ports for easy connectivity.Supports 7 or 8 data bit characters, 1 or 2 stop bits and odd, even, none parity.Supports a baud rate of 300 to 230 Kbps and 1 screw terminal RS-422/485 interface on serial port 2.Has 4 x Network (RJ-45) ports for easy connectivity, supports DTR, DSR modem control signals, XON/XOFF (software), CTS/RTS (hardware) flow control.Operates in embedded, unmanaged, fully compliant 802.3u non-blocking network with 2 RJ45 10Base-T/100Base-TX Ethernet ports.Supports protocols like ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP and HTTP.Power supply is rated at 9 - 30 VDC or 9 - 24 VAC with chassis ground and 2.6 W, has removable screw terminal block connector.Has front panel recessed push button for resetting.Supports internal web server, SNMP v2, Serial login, Telnet login, DeviceInstaller software management.Meets UL, CSA, FCC, CE, TUV, CTick, VCCIs certifications and standards.Weighs 0.21 kg.Black.Lantronix® Industrial device server enables remote firmware upgrades, saving time and money.

Light Industrial/Commercial Ethernet 8-port unmanaged switch. Galvanically isolated ports. Power supply with wide voltage range means it can be powered from USB or on the 24V factory floor. Power terminal is removable for easy wiring. Power consumption is optimized based on the status of the link device. No software required. Perfect for factory floor, in vehicle and marine applications. Wall mountable using mounting screw holes, optional DIN Rail mount accessory available..Light industrial/commercial Ethernet unmanaged switch.Eight 10/100Mbps Ethernet ports.Dimensions: 4.3"H x 3.9"W x 1.2"D.Wide power input: 5-30VDC.Meets or exceeds Microsoft Certified Gold Partner, WEEE, RoHS, AEO (C-TPAT), CE, METL, UL 60950-1 standards.IP30 nonconducting polyamide casing prevents electrical conduction, for safer installation.No software needed: simply plug in any Ethernet cable.Power consumption is optimized based on the status of the link device.All Ethernet ports are Auto MDI/ MDIX supporting straight through or crossover Ethernet cables.Easy wire removable screw terminal block.Wall-mount holes compatible with MK-048 DIN mount clips.Lifetime manufacturer limited warranty

This card features MDI/MDIX automatic configuration which helps to simplify installation and configuration. Adapter card provides full and half duplex support for connected devices..Network adapter interface: RJ45.Network adapter speed: 100 Mbps.Compatible networks: 10/100 Mbps.Number of ports: 1.Bus type: PCI express.Card type: Standard profile (LP bracket included).Chipset ID: Realtek - RTL8101E.OS compatibility: Windows 2000/ XP(32/64-bit)/ Server 2003(32/64-bit)/ Server 2008 R2/ Vista(32/64-bit)/ 7(32/64-bit)/ 8(32/64-bit), Linux.Connector type: 1 x PCI express x1 male.External ports: 1 x RJ-45 female.Dimensions: 0.8"(H) x 4.7"(W) x 3.6"(D).LED indicators: 1 x link status.Certificates and standards: CE, FCC, RoHs.Includes: 1 x 10/100 PCI-Express Ethernet Card, 1 x Low Profile Bracket, 1 x Driver CD, 1 x Instruction Manual.Weight: 1.6 oz..Warranty: Lifetime limited

Connect Your Business-Critical Assets and Data Securely to the Enterprise Network High Performance Wi-Fi Your device requires a trustworthy wireless connection. Equipped with industry-leading high-performance 5GHz (802.11ac) Wi-Fi, the SGX 5150 ensures reliable and persistent wireless enterprise connections and bandwidth for high-speed data processing. TruPort Security The SGX 5150 was designed from the ground up to support critical enterprise, government and military grade standards, so that your private data is delivered securely with absolute data integrity. Essential IoT Applications IoT deployment and network integration has never been easier. The SGX 5150 includes essential IoT apps that deliver multi-interface connectivity, full networking, extensive security, industry-leading device configuration management and robust system diagnostics so that you can quickly accelerate to an IoT business solution. Multi-Interface Access The SGX 5150 provides multiple interface options to connect to virtually any edge asset with singular or multiple RS-232/485 serial ports, USB 2.0 with host and device modes and Ethernet interfaces. The SGX 5150 provides an elegant and robust solution for organizations seeking compatibility with multiple devices or product lines..Easily configure and connect to the enterprise network, instant out-of-box.Unique Device ID feature allows you to make your device visible to authorized users.Linux SDK and Python runtime services allow quick development and deployment of custom apps.Experience the Lantronix industrial design quality and reliability.Wi-Fi Alliance and USB Certification

The Brainboxes ED-538 Ethernet to digital IO relay gateway is suitable for use with CNC machines/PLCs, gauges/dials, counters, sensors, motor and fan. It has eight digital inputs and four relays digital outputs. This reverse polarity protected gateway has redundant DC dual power inputs. It works with Microsoft Windows® 10, Microsoft Windows® 8/7/XP/Vista 32-bit and 64-bit Editions, Microsoft Windows® Server 2012, Android, Mac OS X and Linux operating sytem. Removable terminal block has color-coding and numbering for easy wiring. It supports simple ASCII or industry standard Modbus TCP..Dimensions: 5" x 4"x 0.9".IO channels: Eight digital inputs and four relays digital outputs, Modbus TCP or DCON ASCII (over TCP or Virtual COM port) IO protocols.Input logic level 0: -30 to 1, Input logic level 1: 2 V to 30 V, Input latches: Triggered by user programmable positive or negative edges.Serial port: RS485 NuDam/ADAM compatible serial gateway.Network: RJ45 jack 10/100 MHz autosensing, cross over autosensing (MDIX), ICMP, IP, TCP, DHCP, HTTP network protocols, 1500 V magnetic isolation.Power: Redundant DC dual power inputs, reverse polarity protected 5 VDC to 30 VDC, 35 V maximum input.Operating systems: Microsoft Windows 10, Microsoft Windows 8/7/XP/Vista (32 bit and 64 bit), Windows Server 2012/2008/2008 R2, iOS, Mac OS X, Linux.Easy-wire - color coded and numbered removable terminal blocks.Factory floor process control and automation, integrated DIN rail mount.Supports simple ASCII or industry standard Modbus TCP.Software: APIs for Visual Basic, C#.WEEE, RoHS compliant.Weight: 5.26 oz..Brainboxes Ethernet to DIO relay is well suited for factory floor process control and automation. Relay comes with DIN rail mount form factor for convenience.

The StarTech.com® ST10000SPEXI 1-Port 10G Ethernet network card utilizes the Intel® X550-AT chipset to provide power, performance and enhanced capabilities that is required for dependable network connections. It lets you to add a 10G/5G/2.5G/1G/100Mbps R-J45 Ethernet port to provide network connectivity for high bandwidth workstations and servers. The Intel X550-AT chipset provides advanced features including Intel® Virtualization technology for connectivity and PXE network boot support. It has dual-profile design that allows easy installation into a wide range of computer/server chassis, regardless of form factor..Ethernet network card offers flexible configuration and secure networking to users in a standards-based environment.Dimensions: 4.8"H x 2.7"W x 6"L, Cable length: 3.9".Color: Black.Connectors: One PCI Express x4 male, one RJ-45 female.Data transfer rate: 10 Gbps.Bus type: PCI Express, Card type: Standard Profile (LP bracket incl.).Chipset ID: Intel X550AT.Industry standards: IEEE 802.3an (10GBASE-T), IEEE 802.3ab (1GBASE-T), IEEE 802.3u (100Base-T), NBASE-T (Linux only), PCI Express Rev 2.0.Compatible networks: 10 Gbps/5G/2.5G/1G/100 Mbps.Supported protocols: IEEE 802.3x (Flow Control Support), IEEE 802.1Q (VLAN tagging).LED indicators: One Link/activity, one 10G/1G speed.OS compatibility: Windows 7, 8, 8.1, 10 (64-bit only), Windows Server 2008 R2, 2012, 2012 R2 (64-bit only), 2016, Linux 2.4.x/2.6x/3.x LTS Versions.Includes: One 10G network card, one low-profile bracket, one quick-start guide.Weight: 3.4 oz..Comes with 2 years warranty