Solid State Drive Duplicators

Device Type: Solid state / hard drive duplicator.Installed Devices / Modules Qty: 1 (max).Supported Drives: SATA-600 / SAS-2.Localization: Australia, Japan, North America, United Kingdom, Europe.Built-in Devices: Status LCD.Storage Controller:

Standalone Dual Bay M.2 SATA/NVMe Duplicator/Eraser, HDD/SSD Cloner/Wiper, M.2 PCIe/AHCI, Hard Drive Sanitizer/Copier, TAA.Standalone Dual Bay 1-to-1 duplicator/eraser supports M.2 PCIe NVMe/M.2 SATA AHCI/ 2.5/3.5in SATA HDD / SSD; Clone up to 7.5GBpm.Cloner/Wiper to duplicate between M2 NVMe/SATA and 2.5/3.5" SATA Hard Drive interfaces.Duplicate modes: System/File | All Partitions | Whole Drive | Percentage Duplication.Erase modes: Quick Erase | Full Erase (Single/3-Pass) | Secure Erase (Clear/Purge meets NIST SP 800-88 Rev 1).Upgradeable firmware complies w/future DOD/Government standards; TAA.Hostless Drive Duplicator and Eraser | PCIe M.2 | SATA M.2 | 2.5 in. SATA | 3.5 in. SATA

This M.2 NVMe drive duplicator with a USB 3.2 Gen2x2 (20Gbps) host port offers high-speed duplication capabilities of up to 90GB per minute, providing efficient and fast cloning of storage devices. High-Speed M.2 NVMe Duplication Clone or duplicate M.2 NVMe solid-state drives (SSDs) without the need for a computer. This device requires no drivers or software and offers high-performance sector-by-sector duplication rates of up to 90GBpm and works with any file format, copying the entire drive..Disc Duplicator Type & Use M.2 NVMe Drive Duplicator, standalone operation..Number of Targets 1:1 duplication (one target)..Hard Drive Interface M.2 NVMe..Platform Compatibility Standalone; no computer required..Software Not applicable; standalone operation..Maximum Read Speed: Up to 1 GB/s..Maximum Write Speed: Up to 1 GB/s..Dimensions: 3 in x 3 in x 1.7 in (L x W x H)..Certification & Standards: CE, FCC, RoHS..Limited Warranty 2 Year

The SDOCK2U33RE Dual 2.5/3.5" SATA HDD/SSD duplicator dock lets you duplicate/clone an existing hard drive without the use of a host computer system -- or dock and swap drives from your desktop or laptop computer simultaneously, using a single USB or eSATA port. The SDOCK2U33RE offers convenient dual-function performance. As a hard drive duplicator, the SDOCK2U33RE lets you create an exact sector-by-sector clone from one hard drive to another, including partitions and boot sector information -- ensuring data integrity and consistency for sensitive operations, such as data recovery. As an external hard drive dock the SDOCK2U33RE lets you connect your drives through either eSATA or USB, with each drive slot individually supporting high capacity 2.5/3.5" hard drives or solid state drives, tested up to 4 TB. With support for SATA III (6 Gbps) you can maximize efficiency with duplication speeds up to 22 GB per minute, and eSATA docking speeds up to 6 Gbps. The Dock can also be connected through USB 3.0 with UASP for transfer speeds up 5 Gbps (70% faster than conventional USB 3.0). See our UASP testing results below for further details..Standalone sector-by-sector hard drive duplication with speeds up to 22GB per minute.Supports both 2.5" and 3.5" form factor hard drives (HDD) and solid state drives (SSD).eSATA and USB 3.0 host interface connections.1:1 hard drive duplicator and docking station.Support SATA III (6 Gbps) and UASP for optimal performance.Supports dual drive capacity up to 4 TB per slot (8 TB in total).Compatible with SATA revision I/II/III (1.5/3.0/6.0 Gbps) drives.Compatible with USB 3.0/2.0/1.1 (5 Gbps / 480 Mbps / 1.5 Mbps).Dual bay, top slot-loading design with drive doors.OS Compatibility: OS independent; No software or drivers required.What's in the Box: SATA HDD duplicator dock, USB 3.0 cable, eSATA cable, universal power adapter (NA,UK,EU, ANZ), instruction manual.Clone a 2.5in/3.5in SATA drive without a host computer connection, or dock the drives over USB 3.0 or eSATA for easy access

The StarTech.com SDOCK2U313R standalone duplicator docking station is suitable for 2.5" and 3.5" SATA solid-state drives and hard disk drives. This black dock can duplicate the hard drives quickly at a speed of 25GB per min without any host computer. This dock works with both USB-A, USB-C enabled devices and is compatible with thunderbolt 3 USB-C port devices. This 6TB external serial ATA/600 dock transfers the files at a higher speed. The dock comes with dual-bay top slot tool less and tray less design and has multi-functional LED indicators..6TB drive.Serial ATA/600 drive interface.Power: 1.3 A, 100 - 240 VAC (input), 3000 mA, 12 VDC (output).Duplicate hard drives quickly, without a host computer, at fast speeds of up to 28GB per minute for SSDs.Works with both USB-C and USB-A enabled devices.Black plastic.I/O expansions: 2 x 2.5"/3.5" bays.Dimensions: 2.8"H x 5.2"W x 5.2"D.Interface/ports: USB 3.1.Form factor: External.Bus type: USB 3.1 Gen 2, Chipset ID: ASMedia - ASM1352R.Data transfer rate: 10 Gbps, Duplication speed: 28 GBpm.Connectors: 2 x SATA data and power combo receptacle (drive), 1 x USB 3.1 USB type-B female.LED indicators: Power, mode, 2 x HDD status, clone.UASP support, cooling fan, hot swap capability.Transfer files at high speed between a docked hard drive and a host computer, tool-less and tray-less design.Includes USB 3.1 duplicator docking station, universal power adapter, universal power adapter, USB A to B cable, quick start guide.Meets RoHS, WEEE, FCC, UL, CE standards.Weight: 17.9 oz..Comes with 2 year warranty

The new, high-performance Kanguru Clone 5HD tower hard drive cloning machine is a high speed, stand-alone SATA hard drive duplicator that can copy up to five hard drives or SSDs simultaneously. With ultra-fast copy speeds of up to 6GB/min, the KanguruClone is one of the fastest cloning systems available. A feature-rich LCD makes the duplication process a breeze! Just insert your master hard drive and up to 5 target hard drives, and you will be duplicating within minutes. The hard drive cloning machine has many advanced features for the IT professional, yet the controls are simple enough that even a novice can begin cloning hard drives within minutes of taking it out of the box. With multiple copy modes including Brief, Disk, Resize and secure disk wiping capabilities, the Kanguru Clone 5HD Tower Duplicator is great for IT work, backing up hard drives, data wiping, large PC deployments, drive testing and more! You can even copy a current small capacity drive to a larger capacity drive with all original content intact!.This high-performance tower hard drive cloning machine is a high-speed, stand-alone SATA hard drive duplicator.Can copy up to five hard drives or SSDs simultaneously.Hard drive interface: SATA II.Supports all major file systems.Dimensions: 15.5"H x 7"W x 10"D.Features tool-free rack design.Supports 3.5" SATA HDDs natively, 2.5" SATA HDDs and SSDs up to 0.37" thick with adapters.Includes two 2.5" to 3.5" HDD adapter cartridges (additional adapters sold separately).Multiple UDMA mode support.1-year manufacturer limited warranty

The new, high-performance Kanguru Clone 11HD tower hard drive cloning machine is a high speed, stand-alone SATA hard drive duplicator that can copy up to 11 hard drives or SSDs simultaneously. With ultra-fast copy speeds of up to 6GB/min, the KanguruClone is one of the fastest cloning systems available. A feature-rich LCD makes the duplication process a breeze! Just insert your master hard drive and up to five target hard drives, and you will be duplicating within minutes. The hard drive cloning machine has many advanced features for the IT professional, yet the controls are simple enough that even a novice can begin cloning hard drives within minutes of taking it out of the box. With multiple copy modes including Brief, Disk, Resize and secure disk wiping capabilities, the Kanguru Clone 11HD Tower Duplicator is great for IT work, backing up hard drives, data wiping, large PC deployments, drive testing and more! You can even copy a current small capacity drive to a larger capacity drive with all original content intact!.This high-performance tower hard drive cloning machine is a high-speed, stand-alone SATA hard drive duplicator.Can copy up to 11 hard drives or SSDs simultaneously.Hard drive interface: SATA II.Supports all major file systems.Dimensions: 16.5"H x 18"W x 7"D.Features tool-free rack design.Supports 3.5" SATA HDDs natively, 2.5" SATA HDDs and SSDs up to 0.37" thick with adapters.Includes two 2.5" to 3.5" HDD adapter cartridges (additional adapters sold separately).Multiple UDMA mode support.1-year manufacturer limited warranty

The high performance KanguruClone 7HD SATA Pro drive duplicator is a high speed, stand-alone SATA drive duplicator that can duplicate up to seven hard drive or solid state drive copies simultaneously. With ultra-fast copy speeds of up to 12GB/min, the KanguruClone is one of the fastest data duplication systems available. A feature rich LCD makes the duplication process a breeze. Just attach your master drive and up to seven SATA hard drives or solid state drive targets, and you will be duplicating within seconds. The KanguruClone 7HD SATA Pro drive duplicator has many advanced features for the IT professional, yet the controls are simple enough that even a novice can begin cloning drives within minutes. With multiple copy and compare modes (Brief, Disk, Resize and Ratio), secure disk wiping capabilities and robust logging capabilities, the KanguruClone 7-target SATA HDD/SSD Duplicator is great for IT work, backing up and cloning hard drives and solid state drives, data wiping, large PC deployments, drive testing and more! A new feature of the KanguruClone Pro duplicator series is the ability to resize copy a larger capacity hard drive to a smaller one, or even migrate HDDs to SSDs!.This high-performance tower hard drive cloning machine is a high-speed, stand-alone SATA hard drive duplicator.Can copy up to seven hard drives or SSDs simultaneously.Hard drive interface: SATA III.Supports all major file systems.Dimensions: 15.5"H x 9"W x 13.5"D.Features tool-free rack design.Easy-to-use duplicator provides ultrafast copy speeds and multiple copy modes.Great for IT work, backing up and cloning hard drives and solid-state drives, data wiping, large PC deployments, drive testing, and more.1-year manufacturer limited warranty

The high performance KanguruClone 15HD SATA Pro drive duplicator is a high speed, stand-alone SATA drive duplicator that can duplicate up to 15 hard drive or solid state drive copies simultaneously. With ultra-fast copy speeds of up to 12GB/min, the KanguruClone is one of the fastest data duplication systems available. A feature rich LCD makes the duplication process a breeze. Just attach your master drive and up to 15 SATA hard drives or solid state drive targets, and you will be duplicating within seconds. The KanguruClone 15HD SATA Pro drive duplicator has many advanced features for the IT professional, yet the controls are simple enough that even a novice can begin cloning drives within minutes. With multiple copy and compare modes (Brief, Disk, Resize and Ratio), secure disk wiping capabilities and robust logging capabilities, the KanguruClone 15-target SATA HDD/SSD Duplicator is great for IT work, backing up and cloning hard drives and solid state drives, data wiping, large PC deployments, drive testing and more! A new feature of the KanguruClone Pro duplicator series is the ability to resize copy a larger capacity hard drive to a smaller one, or even migrate HDDs to SSDs!.This high-performance tower hard drive cloning machine is a high-speed, stand-alone SATA hard drive duplicator.Can copy up to 15 hard drives or SSDs simultaneously.Hard drive interface: SATA III.Supports all major file systems.Dimensions: 16"H x 9.5"W x 21"D.Features tool-free rack design.Easy-to-use duplicator provides ultrafast copy speeds and multiple copy modes.Great for IT work, backing up and cloning hard drives and solid-state drives, data wiping, large PC deployments, drive testing, and more.1-year manufacturer limited warranty

The KanguruClone M.2 NVMe SSD duplicator is a high-speed, stand-alone duplicator that can clone up to four ultra-high-performance M.2 NVMe SSDs at once. With copy speeds of up to 18GB/min, this PCIe M.2 duplicator is a fast and cost-effective duplication system, perfect for organizations looking to upgrade their PCs with the new NVMe technology. A full-color, 7" TFT touchscreen user interface makes this the easiest-to-use Kanguru duplicator ever! Just attach your master NVMe drive and up to 11 NVMe solid-state drives and you will be duplicated with just a few taps of the screen. This M.2 SSD duplicator has advanced features for the IT professional, yet the controls are simple enough that even a novice can begin using it within minutes of taking it out of the box..High-speed stand-alone duplicator for cloning high-performance M.2 NVMe SSDs.Just attach your master NVMe drive and up to 11 NVMe solid-state drives, and the duplication will be finished with just a few taps on the screen.Supports transfer rates up to 18Gbps.Clones any operating system: Windows, Linux, macOS, and many more.Dimensions: 16.5"H x 14.25"W x 4.75"D.With multiple copies and compare modes (Brief, Full, Resize, and Image), secure disk wiping capabilities and robust logging capabilities, great for IT work, backing up NVMe solid-state drives, data wiping, system rollouts, drive testing, and more.Supports all standard M.2 NVMe SSDs.Features a 4.3" full-color TFT touch screen.Supports HPA (Host Protection Area) and DCO (Device Configuration Overlay).1-year manufacturer limited warranty

The KanguruClone M.2 NVMe SSD duplicator is a high-speed, stand-alone duplicator that can clone up to four ultra-high-performance M.2 NVMe SSDs at once. With copy speeds of up to 12GB/min, this PCIe M.2 duplicator is a fast and cost-effective duplication system, perfect for organizations looking to upgrade their PCs with the new NVMe technology. A full-color, 4.3" TFT touchscreen user interface makes this the easiest-to-use Kanguru duplicator ever! Just attach your master NVMe drive and up to four NVMe solid-state drives and you will be duplicated with just a few taps of the screen. This M.2 SSD duplicator has advanced features for the IT professional, yet the controls are simple enough that even a novice can begin using it within minutes of taking it out of the box..High-speed stand-alone duplicator for cloning high-performance M.2 NVMe SSDs.Just attach your master NVMe drive and up to four NVMe solid-state drives, and the duplication will take you just a few taps on the screen.Supports transfer rates up to 12Gbps.Clones any operating system: Windows, Linux, macOS, and many more.Dimensions: 10"H x 7.5"W x 2"D.With multiple copies and compare modes (Brief, Full, Resize, and Image), secure disk wiping capabilities and robust logging capabilities, great for IT work, backing up NVMe solid-state drives, data wiping, system rollouts, drive testing, and more.Supports all standard M.2 NVMe SSDs.Features a 4.3" full-color TFT touch screen.Supports HPA (Host Protection Area) and DCO (Device Configuration Overlay).1-year manufacturer limited warranty

The Kanguru Mobile Clone HD duplicator is an ultra-portable, full-featured, standalone one-to-one hard drive duplicator. It has both SATA and PATA interfaces for connecting virtually any standard hard drive: 2.5" or 3.5" SATA hard drives, 3.5" PATA hard drives, or SATA SSDs. The Kanguru Mobile Clone HD duplicator can handle it all with ease. With all the features of Kanguru's full-size hard drive duplicators, transfer rates up to 6GB/min and a small form factor, the Kanguru Mobile Clone HD duplicator is the perfect addition to any IT technician's toolbox! A sharp LCD display and intuitive user interface make the Kanguru Mobile Clone extremely easy to use! Just attach your master drive and a target drive, select your copy mode and run the duplication job; it's that easy! The Kanguru Mobile Clone HD duplicator has all the features that IT professionals need, yet even a computer novice can use it right out of the box. The Kanguru Mobile Clone Hard Drive copier great for personal use, IT work, backing up hard drives, data wiping, drive testing and more!.Ultra-portable stand-alone HD duplicator is a full-featured one-to-one hard drive duplicator device.Supports one-to-one hard drive duplication.Dimensions: 1.5"H x 6.2"W x 4"D.Clone SATA SSDs natively.Native SATA and 3.5" PATA interface.Supports multiple copy modes: full, brief, and resize.Fast transfer rates (up to 6GB/min).Can clone 2.5" or 3.5" SATA hard drives and 3.5" IDE hard drives natively.Can turn a hard drive into a Storage Center for saving common duplication jobs.1-year manufacturer limited warranty