Stepladders Tall

The FS1410HD fiberglass 10' twin step ladder has a duty raiding of 375 lbs. Allows two users to work on the same ladder simultaneously to easily accomplish tasks that would be more difficult for a single person..Type IAA duty rating step ladder made of fiberglass.Twin step ladder is 120" L x 28.6" W with an approximate 64.6" spread.Work station top designed to increase ladder productivity.DaBoot for slip resistant footing.Heavy gauge steel hinges.Inside spreader braces.Double-rivet step construction

The T7408 fiberglass 8' twin step ladder has a duty rating of 375 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity..Twin step ladder made of fiberglass.Twin step ladder is 96" L x 28.68" W with an approximate 64.13" spread.Rated to hold up to 375 lbs. per side.Top dimension is 8.25" D x 14.5" L.Heavy gauge aluminum extruded top with thick side plates.Back-up aluminum plates reinforce all top connectors.Shoulder bolt and lock nut on top hinge; four solid aluminum rivets attach top to each rail.Slip-resistant Traction-Tred steps are double riveted and knee-braced.Extra heavy-duty internal aluminum spreaders.Rubber step bumpers to resist damage.EDGE bracing system helps to decrease damage to rail.GLAS*MARK Violator stripes on rails allow the ladder to be more visible.Aluminum external rail shield helps protect against abrasion damage.Shoe pads riveted to the EDGE structure.Every rivet backed up by metal, metal plates, or washer to protect rails.Designed for one or two-person jobs.Maximum load per side, including person and materials, shall not exceed duty rating of ladder

The T6208 fiberglass 8' twin step ladder has a duty rating of 300 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity..Twin step ladder made of fiberglass.Twin step ladder is 96" L x 26.84" W with an approximate 64.13" spread.Rated to hold up to 300 lbs. per side.Top dimension is 8.5" D x 13" L.High performance dual HolsterTop paint and tool holder.Four rivets attach top to each rail.Double riveted slip-resistant Traction-Tred steps.Heavy-duty internal spreaders.All steps are knee-braced.EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage.Slip-resistant foot pads attached to the EDGE structure.Every rivet backed up by metal, metal plates, or washers to protect rails.Design for one or two-person jobs.Maximum load per side, including person and materials, shall not exceed duty rating of ladder

The T6210 fiberglass 10' twin step ladder has a duty rating of 300 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity..Twin step ladder made of fiberglass.Twin step ladder is 120" L x 30.36" W with an approximate 78.13" spread.Rated to hold up to 300 lbs. per side.Top dimension is 8.5" D x 13" L.High performance dual HolsterTop paint and tool holder.Four rivets attach top to each rail.Double riveted slip-resistant Traction-Tred steps.Heavy-duty internal spreaders.All steps are knee-braced.EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage.Slip-resistant foot pads attached to the EDGE structure.Every rivet backed up by metal, metal plates, or washers to protect rails.Design for one or two-person jobs.Maximum load per side, including person and materials, shall not exceed duty rating of ladder

The 7407 fiberglass 7' step ladder has a duty rating of 375 lbs. and features 3" metal steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Type IAA duty rating step ladder made of fiberglass.Step ladder is 84" L x 26.84" W with an approximate 49" spread.Rated to hold up to 375 lbs..Top dimension is 7.25" D x 14.875" L.Extra heavy-duty aluminum HolsterTop with thick side plates.Back-up plates reinforce all top connectors.Shoulder bolt and lock nut on top hinge; 4 solid aluminum rivets attach top to each front rail.Slip-resistant Traction-Tred steps are double riveted and have extra wide knee braces.Full set of rear horizontals are knee braced and spaced one per foot.Extra heavy-duty internal aluminum spreaders.Aluminum external rail shield helps protect against abrasion damage.GLAS*MARK Violator stripes on rails allow the ladder to be more visible.Slip-resistant foot pads attached to the EDGE structure.EDGE bracing system helps to decrease damage to rail.Every rivet backed up by metal, metal plates, or washer to protect rails.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2

The 6207 fiberglass 7' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 84" L x 25.12" W with an approximate 47.5" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety

The 6110 fiberglass 10' step ladder has a duty rating of 300 lbs. and features oversized, molded Proguard Boot™ for firm slip-resistant footing. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 120" L x 28" W with an approximate 65.75" spread.Double riveted slip-resistant 3" Traction-Tred steps, rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.HolsterTop with Lock-In System secures tools to increase productivity.Back-up plates reinforce all top connectors.Braces on top and bottom step.Double riveted slip-resistant Traction-Tred steps.Full set of rear horizontals spaced one per foot.Heavy-duty internal spreaders.Also available, optional manual pail shelf kit, Model PK76-9 , and automatic closing pail shelf kit Model PK76-3

The 6210 fiberglass 10' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 120" L x 30.36" W with an approximate 65.88" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety

The 6212 fiberglass 12' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Step ladder made of fiberglass.Step ladder is 144" L x 33.84" W with an approximate 78.25" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety