Tubular Light Bulbs
14 resultsProvide plenty of light with these linear fluorescent lamps. This 30-pack of lamps ensures there's plenty to go around the office, and each one lasts for up to 30,000 hours to ensure minimal downtime. These Philips fluorescent T12 lamps use 40 watts of energy and produce a cool white tone for easy working..Fluorescent tube bulb is ideal for applications requiring continuously maintained light output.Light bulb wattage: 40W.T12 shape and G13 (medium bi-pin fluorescent) base.Bulb life time lasts up to 30000 hours (life 12-hour start).Initial lumens (nominal): 2550lm.Each box contains 30 bulbs.Bulb dimensions: 48"L.Only 4.4mg of mercury per tube with ALTO II Lamp Technology.Color temperature: 4100K; cool white light.Keep areas shining bright with these Philips linear fluorescent T12 lamps.
Keep the workplace illuminated with this 30-pack of T8 fluorescent bulbs. The 4-foot-long tubes cast 2800 lumens of neutral white light so workers can focus on tasks without feeling the heat from the bulbs. These Philips 32-watt linear lights have a life span of approximately 30,000 hours for long-term use..Fluorescent bulbs are ideal for applications where longer relamp cycles would be beneficial.Light bulb wattage: 32W.Bulb in T-8 shape and G13 (medium bi-pin fluorescent) base.Bulb lifetime lasts up to 44000 hours.Initial lumens-nominal: 2950lm.Each box contains 30 bulbs in carton pack.Bulb dimensions: 48"L.Only 1.7mg of mercury per tube with ALTO II Lamp Technology.Color temperature 3500K, neutral white light.Reduced impact on the environment without sacrificing performance.Brighten up the office with these Philips linear fluorescent bulbs.
Philips Lighting 40 watt T10 Tubular E26 medium base specialty incandescent lamp in clear finish, offers 435 Lumens of light output. This lamp comes with 2700K color temperature rating radiates to ensure optimal light level in the surrounding. B, C-8 Filament lamp has aluminum base construction. This lamp has average life of 1000 hours. It is suitable for refrigerators..Rated Average Life 1,000 hours.Incandescent T10 Light Bulb.Light bulb features a medium screw.435 Lumens.Gives off a warm white light
100 W T12 fluorescent light bulb with a frost finish. Has a color temperature of 4200K, 7550 lumens, and a CRI of 62. Is not dimmable. Has an overall diameter of 1.5 in and an overall length of 81.91 in..This seven foot T12 is great for Drive thrus and commercial spaces..Replaces PHI 234484 F84T12/CW/HO/ALTO 15PK with instead 4200k high output bulb..T12 with RD17 Base.
LED Bulb: Medium Base; 120 Volt. Color Temperature: 3,000 Kelvin. Brightness: 200 Lumens. 35,000 Average Hour Life. Replaces 20W Halogen.2.3W, Replaces 20W Halogen.E26 Medium Base.35,000 Hour Average Life.Brightness: 200 Lumens.H: 4" Dia: 1.25".Color Temperature: 3,000 Kelvin
The Philips 32W Fluorescent Light Bulb has a Rated Average Life of 24,000 hours..Shape-T8.Wattage-32W.Base-Medium Bipin.Length-48".Lumens-3000.Rated Average Life-24,000 Hours.Color Temp-3500K.30/Case.Pin Type: medium bi pin
The Philips CorePro InstantFit T8 (5000K) LED lamps provide hassle-free installation with simple lamp for-lamp replacements..Perfect indoor residential and commercial lighting applications. This affordable Type-A light is a great for those looking to use LEDS..Replaces 4 foot traditional T8 with Dayligh color temperature..A T8 with G13 base.
The Viribright LED PL bulb replaces inefficient 13W and 18W PL CFLs and retrofits a variety of commercial fixtures, including recessed cans, sconces, and ceiling fixtures most commonly found in light retail stores, hotels, and apartment buildings. Constructed with a lamp holder that rotates to adjust to a variety of base angles found in the market and engineered for years of maintenance-free horizontal stick applications..LED PL bulb fits a variety of commercial fixtures, including recessed cans, sconces, and ceiling fixtures.Consumes up to 80% less energy, replacing inefficient 13W and 18W PL CFLs.Tube-shaped with GX23 base.Lasts for up to 25000 hours.Provides balanced soft white (2700K) light at 680 lumens.Six bulbs per pack.Bulb dimensions: 5.94"H x 1.65"Dia..Constructed with a lamp holder that rotates to adjust to a variety of base angles found in the market.Magnetic ballast compatible only or must bypass ballast (direct wire).Engineered for years of maintenance-free horizontal stick applications.Voltage: 100-285VAC.Meets or exceeds the RoHS and FCC standards.3-year manufacturer limited warranty
The Viribright T8 22W 4' LED tube ballast bypass bulb is great for replacing old fluorescent lights. The bulb can work with single- or double-ended wiring schemes. Offers easy installation with eight ways to wire/rewire. Perfect for use in warehouses, hotels, schools, and restaurants. The Viribright 4' 22W T8 ballast bypass LED is the high-powered choice for installation in retrofit fixtures requiring 4' linear fluorescent tubes that are commonly found in workshops, offices, grocery stores, and convention halls, but its brightness is on the higher side of the category. This tube must be used without a ballast (direct wire), which reduces the overall energy consumption of the fixture. The total energy consumption of this tube is 22W while producing in excess of 2900 lumens in 5000K color temperature. This tube is easy to install, but it is recommended to have a certified electrician handle the bypassing of the ballast and installation..Ballast bypass LED light bulb tube is a perfect lighting solution for workshops, offices, grocery stores, convention halls, and more.Replaces a standard fluorescent tube and uses only 22W.T8 bulb with wire terminal Type-B (direct) base.Rated to last up to 50000 hours.Provides balanced daylight (5000K) light at 2970 lumens.10 bulbs per box.Bulb length: 4'.Features a frosted lens cover.Compatible with T8 and T12 fixtures.Use shunted or non-shunted tombstones for T8 tube installation.Voltage: 120-277V.Meets or exceeds the UL standard.1-year manufacturer limited warranty
Philips PL-S LED bulb makes the transition from CFL to LED lamps as simple as replacing a lamp. The InstantFit (UL Type A) bipin PL-S LED lamps are available in a wide array of color temperatures. They quickly and effectively replace 13W 2-pin compact fluorescent PL-S lamps..LED bulb makes switching from CFL to LED lamps as simple as replacing a lamp.Replaces a 13W bulb and uses only 5W.Tube bulb with GX23 base.Lasts for up to 50000 hours.Provides balanced cool white (4000K) light at 580 lumens.20 bulbs per carton.Bulb dimensions: 6.56"H x 1.25"W x 0.63"D.Made of frosted plastic.Voltage: 120-277VAC.Meets or exceeds the RoHS and UL standards
The Viribright LED PL bulb replaces inefficient 13W and 18W PL CFLs and retrofits a variety of commercial fixtures, including recessed cans, sconces, and ceiling fixtures most commonly found in light retail stores, hotels, and apartment buildings. Constructed with a lamp holder that rotates to adjust to a variety of base angles found in the market and engineered for years of maintenance-free horizontal stick applications..LED PL bulb fits a variety of commercial fixtures, including recessed cans, sconces, and ceiling fixtures.Consumes up to 80% less energy, replacing inefficient 13W and 18W PL CFLs.Tube-shaped with GX23 base.Lasts for up to 25000 hours.Provides balanced cool white (4000K) light at 680 lumens.Six bulbs per pack.Bulb dimensions: 5.94"H x 1.65"Dia..Constructed with a lamp holder that rotates to adjust to a variety of base angles found in the market.Magnetic ballast compatible only or must bypass ballast (direct wire).Engineered for years of maintenance-free horizontal stick applications.Voltage: 100-285VAC.Meets or exceeds the RoHS and FCC standards.3-year manufacturer limited warranty
The Philips CorePro InstantFit T8 (4000K) LED lamps provide hassle-free installation with simple lamp for-lamp replacements..Perfect indoor residential and commercial lighting applications. This affordable Type-A lights is a great for those looking to use LEDS..Replaces 4 foot traditional T8 with Cool white color temperature..A T8 with G13 base.
The MasterClass InstantFit T8 lamps provide hassle-free installation with simple lamp-for-lamp replacements. They deliver what we promise, with at least 40% energy savings, flicker-free performance, and the life you would expect. Other lamps claim compatibility but only MasterClass InstantFit (UL Type A) has been proven to work with over 200 ballasts and drivers, delivering even light output, with proven energy savings and a long average lifetime. This four foot T8 provides a great Cool white temperature great for variety of applications..The four foot MasterClass InstantFit T8 lamp provides hassle-free installation with simple lamp-for-lamp replacements. Great for home and retail spaces..Replaces a four foot 32 watt T8 with a cool white temperature.T8 with G13 medium bi-pin base
This four foot 32 watt equivalent LED T8 InstantFit Lamp are an ideal energy saving choice for existing linear fluorescent fixtures. This warm white light provides an ideal glow and can be applied to many Office and Retail locations..A 13 watt T8 led bulb perfect for most commercial and office needs..Replaces a four foot 32 watt T8 with a Warm white temperature.A plug and play plastic T8 with G13 medium bi-pin base