VESA-Compatible TV Stands

Mount a 32" to 70" TV to this mobile TV cart, to share displays between rooms.Smooth spring-assisted height adjustment with up to 15.7 in. (400 mm) of vertical adjustment.Wheels for mobility, also lockable for safety.Accommodates TVs 32"-70"

Kanto TTS100 Tabletop TV Stand Mount for 37" to 60" TVs.Supports up to 88 pounds - Designed for 37" to 60" TVs weighing up to 88 lb..Height Adjustable - Raise the center of your TV up to 25.6" to provide space for a sound bar or other AV equipment..Swivel and Tilt - Swivels up to 30 degrees left or right and tilts 5 degrees backwards to reduce glare..Cable Management - Hide wires by routing them through the center of the support column..Safety Tether - For further prevention against tipping, use the provided strap to secure the mount to the wall..Accommodates VESA sizes from 100x100 to 600x400.Safety tether allows the stand to be secured to a stud.Adjustable rubber feet add stability.Solid steel and aluminum construction with durable powder coated finish.Assembly manual and all TV mounting hardware is included.Product Dimensions: 26.3" W x 12.6" D x 35.6" H.Product Weight: 20.3 lb (9.2 kg).Five year manufacturer's warranty.A step above the ordinary.

Adjustable height flat panel TV stand and mount cart with 2" casters has a seamless pipes in powder coat paint finish with cable management through main column..Gray.Dimensions: 46 1/2" - 62 1/2"H x 32 3/4"W x (from floor to the top of the poles).Shelf dimensions: Accessory shelf: 19 5/8"W x 12 1/2"D, (11 3/8" usable depth space).Weight capacity: 100 lbs., shelf: 25 lbs..2" casters and all casters have locking brakes.Seamless pipes with powder coat paint finish.Cable management through main column.Adjustable in 2" increments.Top and bottom cable management holes.VESA compliance: 200 x 200 mm, 200 x 400 mm, 300 x 300 mm, 400 x 400 mm, 400 x 600 mm.Adjustable height flat panel TV stand and mount cart with 2" casters has a seamless pipes in powder coat paint finish with cable management through main column.

This mobile TV stand enables you to create a mobile media center, making it easier to move your AV equipment across classrooms, offices, or learning environments. For better stability and safety, the mobile cart was engineered with a large base that will let you can mount large displays of 60" to 100" and up to 220 lbs. in weight. This mobile tv stand with mount will adapt to the different setups that you may encounter in your office space. The height adjustment indicators make installation easier and enable you to note the preferred height for specific environments. You can also tilt the viewing angle within +5/-10 degrees to best suit your environment and reduce glare..Heavy-duty aluminum mobile TV stand on wheels is great for commercial use in environments with multiple users and frequent movement between areas.Compatible with most displays from 60" to 100" and up to 220 lbs. in weight.Compatible with LG, Samsung, Sony, and other displays; supports VESA patterns 300 x 200, 300 x 300, 400 x 200, 400 x 300, 400 x 400, 600 x 200, 600 x 300, 600 x 400, 800 x 400, 800 x 600, 1000 x 600.Easily adjustable: adjust the height of your display from 47.2" to 66.4" (from the center of the TV to the floor).Assembly required.Included adjustment indicators allow you to perform precise adjustments for a perfect viewing height.Tilt the viewing angle within +5/-10 degrees to best suit your environment and reduce glare.Equipped with two independently adjustable device shelves for increased portability and customization (each supports up to 11 lbs.).Webcam shelf can be raised up to 7.78', while the equipment shelf can be raised up to 2.95' from the floor.Built-in cable management keeps your cables organized and hidden from view.Four lockable casters allow the cart to be easily moved with handles attached to columns.5-year manufacturer limited warranty

MI-879 perfect for conference rooms, class rooms, or rolling around your home. The mounting brackets fit VESA 200x200 and smaller (minimum VESA 75x75), and is designed to hold screens 13” to 42” with a max weight of 44 lbs. Pedestal mobile TV cart features 4 locking casters on the wheels to make the cart stationary, and adjustable height for perfect TV placement. Mounting bracket allows for -30 degree screen tilt to maximize viewing angles. The total cart height reaches 52” with a base width of 20”. TV stand comes in a smooth black finish..Mobile Wheeled TV Floor Stand for 13"-42" Flat Panel TVs.TV Stand height reaches 52” with a base width of 20”.30 degrees of downward tilting on the TV bracket.19" of height adjustability.44 lb. capacity.Supported by manufacturer's limited lifetime warranty.Mount-It! TV Floor Stand Portable TV Pedestal Display

Keep your audience engaged through visual content with this mobile Luxor TV stand and mount. The black stainless steel frame securely holds monitors between 37 and 60 inches, and the touch-tilt feature permits 15-degree adjustment up or down for comfortable viewing. A shelf for AV equipment has an adjustable height of 25 to 40 inches and supports up to 35-pounds. This TV stand has integrated cable management for smooth mobility and organization. The four lockable, rolling casters and two lockable brakes of this Luxor TV stand and mount let you quickly and safely move a mounted device..Universal mobile flat-panel TV stand for classrooms, boardrooms, trade shows, and libraries.Dimensions: 51"H x 31"W x 28"D; shelf dimensions: 5".Designed for 37"-60" flat-panel TV.Assembly required.Comes in black color.Can be adjusted ±15 degrees; maximum equipment size: 60" flat panels.VESA compliance: 100 x 100mm to 400 x 800mm.Unit glides easily on four 4" lockable casters.Weight capacity: 200 lbs., shelf can hold up to 35 lbs..Single stylish adjustable shelf for DVD player or other AV equipment (25"-40"); curved metal legs.Lifetime manufacturer limited warranty.Cable management.Augment your business or educational presentation with visual information using this Luxor TV stand and mount.

No need to drill holes into your wall to mount your TV! This mounting bracket fits VESA 200x200 and smaller (minimum VESA 75x75), and is designed to hold screens 13 to 42 inches with a max weight of 44 lbs. Mounting bracket allows for - 30 degree screen tilt to maximize viewing angles. The total cart height reaches 52 inches with a base width of 20 inhces. TV stand comes in a smooth black finish..Portable TV Floor Stand for 13"-42" Flat Panel TVs.TV Stand height reaches 52" with a base width of 20”.30 degrees of downward tilting on the TV bracket.19" of height adjustability.44 lbs. capacity.Supported by manufacturer's limited lifetime warranty

This mobile TV stand enables you to create a mobile media center with displays from 37" to 70" and up to 154 lbs. in weight, making it easier to move your AV equipment across classrooms, offices, or learning environments. This rolling tv stand with a mount will adapt to the different setups that you may encounter in your office space. For increased portability, this universal mobile cart offers a device shelf for equipment that needs to be easily accessible and supports up to 11lbs., and a storage compartment behind the TV great for storing equipment like power bars, or media players. The heavy-duty TV stand's durable construction makes it perfect for commercial use, in environments with multiple users and frequent movement between areas..Heavy-duty steel mobile TV stand on wheels in black finish is great for commercial us in environments with multiple users and frequent movement between areas.Compatible with most displays from 37" to 70" and up to 154 lbs. in weight.Compatible with LG, Samsung, Sony, and Sharp displays; supports VESA patterns 200 x 200, 300 x 300, 350 x 350, 400 x 200, 400 x 300, 400 x 400, 600 x 200, 600 x 400.For better stability and safety, the mobile cart was engineered with a 36.22" x 27.56" base.Assembly required.Tilt of 0/+5 degrees and rotation of +/-90 degrees allow the display/flat screen to be easily adjusted and locked in the portrait or landscape position.Features a single shelf that supports devices (media player, laptop, and more) up to 11lbs..Shelf size is 16.5" x 11.4".Equipment shelf protrudes out from the back to avoid interference with larger displays in portrait mode.Built-in cable management keeps your cables organized and hidden from view; cables are run through the columns with entry points below the storage compartment.Equipped with four polyurethane casters that are lockable using a pedal and will provide smooth movement across different types of floors/carpet, while avoiding drag marks on surfaces.2-year manufacturer limited warranty

After thousands of hours of testing, Mount-It! discovered the perfect width and length of a properly balanced base. You'll notice the base is 23.6" x 15.75", which provides the perfect center of gravity to keep your TV mount with shelf solid on any surface. Hold all your media items, and still maintain that minimalist look. The shelf can hold a weight capacity of 11 lbs., which means almost any gaming system, DVD player, or speaker can be placed on it..Black metal height-adjustable TV stand with shelf.Dimensions: 57.6"H x 23.6"W x 15.75"D.Compatible with most televisions between 23"-55" and VESA patterns from 100 x 100mm to 400 x 400mm; TV weight capacity: 77 lbs..Shelf dimensions: 13.7"W x 9.25"L; capacity: 11 lbs..Height-adjustable for a custom viewing experience.Use on carpet and hard surfaces: the base can also be hidden under coffee tables, couches, and media setups.Supported by manufacturer's limited lifetime warranty

Kanto MTM65PL Mobile TV Mount with Adjustable Shelf for 37" to 65" TVs.Fits most flat panel TVs from 37 to 65.Supports TVs up to 100 lb (45 kg).Includes top shelf and adjustable device tray to carry your A/V equipment, each capable of holding up to 10 lb (4.5 kg).Solid steel construction with durable powder coated finish.Height adjustable between 40.5" (1 m) and 60" (1.5 m).Accommodates VESA sizes from 75x75 to 600x400.Four wheel locks can be applied and released with your foot.Integrated cable management.Assembly manual and all TV mounting hardware is included.Product weighs 47.3 lb (21.5 kg).Five year manufacturer's warranty.Redefining the term mobile device.

The MI-874 tripod TV mount is the perfect solution when you need a portable version of a mobile TV stand, TV cart, or outdoor TV stand. Easy to set up and dismantle for portable applications. Ideal for trade shows and for mobile presentation set up in conference rooms. The wide tripod base and integrated TV bracket lets you mount TV sizes from 32" to 70" at virtually any type of event. Height adjustable, tilting, and portable, this mount was designed for home, office, and commercial use..Portable TV Floor Stand with mount for 32"-70" TVs.Adjustable viewing height from 43" to 68".Easy to transport and set up.Tilt: 8 degrees downward.Supports up to 77 lbs..Supported by Manufacturer's Limited Lifetime Warranty.Take Your Entertainment Anywhere with This Portable Tripod TV Stand

The VESA-compliant DDR1327SDD Dual Flat-Screen Monitor Desktop Mount Stand mounts two flat-screen monitors on a sturdy base, allowing you to free up valuable workspace on your desk, table or workstation. Recommended for home or office, the DDR1327SDD fits most flat-panel displays from 13 to 27 inches. Position your monitors with one-touch ease to optimize viewing angle and height to fit your environment and comfort level. A 180 swivel and -45 to +45 tilt capability minimizes glare and provides comfortable viewing from multiple angles. A 360 rotation lets you view your monitors in portrait or landscape orientation. Each VESA mount supports up to 26 pounds. The durable steel frame with scratch-resistant powder-coated finish tolerates frequent handling and blends with any decor. Mounting hardware is included. Conforms to VESA-compliant displays with either of the following mounting hole patterns: 75 x 75 mm and 100 x 100 mm. Features: Mounts 2 Flat-Screen Monitors on a Sturdy Base : Fits most flat-panel TVs, monitors and other displays from 13 to 27 in. Frees up valuable workspace on your desk, table or workstation. Mounting arms adjust independently for viewing angle. Ideal for home or office use. Convenient One-Touch Adjustment : 180 swivel and -45 to +45 tilt capability provide comfortable viewing. Full 360 rotation for viewing in portrait or landscape orientation. Durable Steel Construction : Each mount supports up to 26 lb. Scratch-resistant powder-coated finish blends with any decor. Mounting hardware included. VESA Compliance : Supports the following VESA mounting hole patterns: 75 x 75 mm and 100 x 100 mm. Package Includes: Pole. Base. (2) Mounting arms. Locking head assembly. Pole cable guide. Base collar. (2) VESA plate assemblies. (2) Arm cable guides. (2) End caps. (8) Washers. (18) Screws. Hex key, 3 mm. Hex key, 4 mm. Hex key, 6 mm. Owner's manual..Fits most flat-panel displays from 13 to 27 in..One-touch adjustment for comfortable viewing.Full 360° rotation for viewing in portrait or landscape orientation.180° swivel and -45° to +45° tilt capability provide comfortable viewing.Scratch-resistant powder-coated finish blends with any décor.Supports the following VESA mounting hole patterns: 75 x 75 mm, 75 x 100 mm, 100 x 75 mm and 100 x 100 mm.Each mount supports up to 26 lbs (11.8 kgs).Mounting hardware included.Dimensions (hwd / in.): 18.11" x 31.69" x 10".Dual-Monitor Desktop Mount Stand for 13" to 27" Flat-Screen Displays

Make it easy to roll audio/visual equipment from room to room with this Rocelco flat-screen mobile TV stand. The telescopic height adjustment provides a convenient way to choose the right height for every room, and an A/V component shelf offers space for a DVD player. The top-mounted webcam shelf lets you use this Rocelco adjustable-height flat-screen mobile TV stand for video conferencing or remote classroom applications..This rugged, great-looking flat panel cart may be used for many applications.Fits flat panel screens from 32" to 70"/100 lbs. in standard horizontal (landscape) orientation.Universal design fits all VESA and non-VESA mounting patterns up to 600 x 400mm.A/V component shelf (18"W x 12"D) and top-mount webcam shelf (10"W x 5"D) included; load rating is 10 lbs. per shelf.Telescopic height adjustment of 41.3" to 59" from top of base (base dimensions are 32"W x 28"D).Average height to the top of TV is 67"/170cm depending on the size of screen being mounted.Integrated cable management included.2.5" braked castors included.Wheel a flat-screen television into a conference room or classroom with this Rocelco adjustable-height mobile TV stand for 32 to 70-inch flat-screens.

The Mount-It! universal TV stand can support up to 110 lbs., which includes even the largest televisions. Multiple installation holes and three height levels allow you to achieve the perfect TV alignment. Tilt your screen up or down to reduce glare. Hide cables inside the legs to keep them out of sight. The padded base ensures your dresser or entertainment stand is not scratched..Black steel universal tilting tabletop TV stand.Dimensions: 28.9"H x 15"D.Universally compatible with all TVs that have VESA patterns up to 800 x 400mm, the heavy-duty steel construction supports displays up to 110 lbs..VESA compatible: 75 x 75mm to 800 x 400mm.Three height levels adapt to fit your TV.Adjustable tilt helps reduce glare for a clear viewing angle.Supported by manufacturer's limited lifetime warranty

Host business presentations or classroom discussions with this Luxor flat-panel TV stand. The 90-degree rotation takes your screen from landscape to portrait mode, and the height adjustment feature provides customizable setups for viewing comfort. A cable management system prevents cords and wires from becoming tangled, creating a neat, professional appearance. Use the integrated accessory tray to hold a DVD player, laptop or DVR. Durable rolling casters make this Luxor flat-panel TV stand easy to move from room to room..Height-adjustable flat-panel TV stand cart with 2" casters, cable management, and shelf.Dimensions: 32.75"W x 28.75"D x 46.5"-62.5"H.Designed for 32"-60" flat-panel TV.Assembly required.VESA compliance: 200 x 200mm, 200 x 400mm, 300 x 300mm, 400 x 400mm, 400 x 600mm, 500 x 800mm.Steel frame.Seamless pipes with powder-coated paint finish.Cable management holes through main column.All casters have locking brake.Shelf provides room for television accessories and storage.Unit glides easily on four 2" lockable casters.Lifetime manufacturer limited warranty.Create a mobile audio/visual setup with this Luxor black adjustable-height rotating flat-panel TV stand.

The Mount-It! MI-8001 interactive screen stand will instantly transform your digital flip chart, TV, or interactive touch-screen display into an optimal team-focused work station that allows you to make the most of your meetings or presentations. Using high-quality steel and other materials, Mount-It! have manufactured and engineered this mobile TV stand with wheels to hold up to 154 lbs. Even cable management was added to hide your wires and cables, and a bonus middle shelf tray for easy arm-reach access to any of your audio/video equipment, office supplies, or markers..Interactive screen stand will instantly transform your digital flip chart, TV, or interactive touch-screen display into an optimal team-focused workstation.Dimensions: 62.8"H x 36.2"W x 27.6"D.Compatible with 37"-70" screens, Samsung Flip 2, and Microsoft Surface Hub 2S.Built-in shelf to hold any necessary equipment for your presentation.90-degree rotation and 5-degree tilt adjustment options enable optimal viewing.Easy to assemble or disassemble.Perfect for commercial and home use: conference rooms, schools, trade shows, and more.Special features: cable management, screen rotation (landscape or portrait), shelf, locking caster wheels.Compatible with VESA pattern 200 x 200mm to 600 x 400mm

If you’re looking for a great alternative to wall mounts, then the ProMounts Floor TV Stand is the perfect mount for you. This mount fits most 37 to 70-inch TVs weighing up to 110 lbs. (50 kg) and comes with all the easy-to-install hardware included. It is compatible with VESA patterns between 200x200 and 600x400. The sleek and modern design it comes in also has a great flexible ±25° swivel feature that you can tilt to the desired viewing angle. Use the integrated cable management system built into this design to keep any cords organized and away from disturbing your viewing experience. It is made of solid metal construction material and includes a tempered glass shelf and base. The glass can be used to place your cable box, gaming system, and more. Lastly, the V-Bar Tech and Locking Mechanism ensure the best security for your TV and include 3 adjustable heights (2.4in/6cm Height Gaps)..Swivel Floor Stand Mount.49'' H X 26'' W.110 lbs.

Transform your TV viewing experience with our Full Motion TV Wall Mount. Engineered for flexibility, this mount offers full-motion movement, guaranteeing ideal positioning every time you watch. Say goodbye to annoying glare and ensure optimal visibility with effortless tilt adjustment, providing a range of +5/-10°. The mount's wide swivel range of 180° coupled with a 15.6" extension from the wall, allows you to find the perfect viewing angle from anywhere in the room. Crafted from high-strength steel, it is compatible with TVs ranging from 23" to 55" screen size and weighing up to 66lbs, and designed to accommodate a variety of setups. Installation is a breeze, whether on a single wood stud or on solid walls, saving you valuable time and effort. With VESA compatibility from 75x75 to 400x400 including 100x200, rest assured that this mount is compatible with most TV brands and models..Elevate your viewing experience with full-motion movement for perfect positioning every time.Achieve optimal visibility and reduced glare with effortless +5/-10° tilt adjustment.Enjoy maximum viewing flexibility with a wide 180° swivel range.Compatible with a wide range of displays from 23" to 55" and up to 66lbs.Simple installation on a single wood stud or solid walls, saving you time and effort.Extend your TV up to 15.6" from the wall for the perfect viewing angle.VESA compatibility from 75x75 to 400x400 ensures compatibility with most TV brands and models.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.Find Your Perfect Angle with Full-Motion Articulating TV Mount!

Improve your viewing experience using the ProMounts TV Floor Stand Mount with Height Adjustable Shelf. The artistic and modern design it comes in was also created with simplicity in mind for installation. It can fit most 37”-70” TVs and computer monitors weighing up to 88 lbs. and is compatible with VESA Patterns between 200x200 and 600x400. The non-slip rubber pads allow for even more security to keep your TV locked in place so it does not tip over. As the name suggests, you can adjust your television with the two interchangeable bracket options that allow for a wide range of compatibility. It is made from solid metal construction and was tested with four times the recommended weight limits. This stand is ideal for a fixed or designated viewing area..Swivel Floor Stand Mount.50.6'' H X 26" W.88 lbs.

Improve your viewing experience using the ProMounts Adjustable Tabletop TV Stand. The artistic and modern design it comes in was also created with simplicity in mind for installation. It can fit most 13"-70" TVs and computer monitors weighing up to 110 lbs. and is compatible with VESA Patterns between 200x200 and 800x400. The non-slip rubber pads allow for even more security to keep your TV locked in place so it does not tip over. As the name suggests, you can adjust your TV with the two different brackets, which can be used with a wide variety of TVs. It is made from solid metal construction and was tested with four times the recommended weight limits. This stand is ideal for a fixed or designated viewing area..Fixed Tabletop Mount.7.9'' H X 0.8'' W.110 lbs.

The Tripp Lite dual vertical monitor stand is designed to mount two flat-panel displays above the desk, table or workstation's surface to free up the space. You can customize the display's viewing by just one-touch adjustment and is suitable for 15 - 27" front-panel displays. This stand can swivel up to 20 deg, tilt from -20 to 20 deg and rotates 360 deg for convenient viewing. The stand with 20 lbs. capacity, is perfect for home and office use..Dual vertical flat-screen desk stand/clamp mount.Scratch-resistant powder-coated finish blends with any decor.Dimension: 23"H x 17"W x 11"D.-20/+20 Tilt; 360 rotate, 20 swivel.Conforms to VESA-compliant universal mounting hole patterns.One-touch adjustment for easy viewing from multiple angles.Supports displays up to 20 lb. each.Dual mounting plates adjust independently for angle and height.Ideal for home and office use.Compatible with most desks, tables and workstations.Full 360 deg rotation in both portrait and landscape orientations.Comes with 5 year warranty.Dual vertical flat-screen desk stand/clamp mount, 15" to 27" flat-screen displays.

Overview The DMCS3270XP Mobile Flat-Panel Floor Stand allows you to mount a flat-panel television, monitor or other display and move it from room to room for best viewing or against a wall out of the way when not in use. Recommended for classrooms, lecture halls, offices, auditoriums and conference rooms, the height-adjustable mobile stand fits most flat-panel displays from 32 to 70 inches. You can adjust the DMCS3270XP's height from 47 to 81.5 inches. You can also rotate the display for viewing in portrait or landscape modes. Roll the unit with little effort to the proper viewing location and angle on sturdy four-inch swivel casters that move smoothly through doorways and over thresholds. All four casters lock to keep the stand securely in position. A shelf mounted above the display holds projectors, webcams and laptops. A lower shelf holds other audio/video components, such as a Blu-ray player. Durable aluminum and steel construction supports up to 110 lb. The adapter brackets can be adjusted to conform to VESA-compliant displays with any of the following mounting hole patterns: 200 x 200, 300 x 300, 400 x 200, 400 x 400 and 600 x 400. Features Height-Adjustable Display Stand Rolls from Room to Room Mobile mount for flat-panel TVs, monitors and other displays. Recommended for classrooms, lecture halls, offices, auditoriums and conference rooms. Fits most flat-panel displays from 32 to 70 in. Flexible Features That Meet Your Specifications Height adjusts from 47 to 81.5 in. Rotates for viewing in portrait or landscape modes Rolls on Sturdy Metal Casters 4 in. swivel casters move smoothly through doorways and over thresholds. All casters lock to hold stand securely in position while at rest Durable Construction Made from aluminum and steel. Upper shelf holds projectors, webcams and laptops. Lower shelf holds A/V components, such as Blu-ray player. Supports up to 110 lb. VESA Compliance Supports the following VESA mounting hole patterns: 200 x 200, 300 x 300, 400 x 200, 400 x 400 and 600 x 400 Package Includes Middle base. Left leg. Right leg. Left cover. Right cover. Support plate. Universal plate. (2) Plastic covers. (2) Adapter brackets. Column. Plastic handle. Top cover. Connecting plate. Camera shelf. DVD shelf. (8) Washers. (4) M5 x 14 screws. (4) M6 x 14 screws. (4) M8 x 20 screws. (4) M6 x 30 screws. (4) M8 x 30 screws. (4) M8 x 50 screws. (8) M6 x 16 screws. (3) M6 x 25 screws. (7) M4 x 6 screws. (2) M6 x 14 screws. (6) M6 x 8 screws. (4) M8 x 25 screws. (2) M5 x 8 screws. (8) Small spacers. (8) Big spacers. Allen wrench. Wrench. Owner's manual.Fits most flat-panel displays from 32 to 70 in..Designed for portrait or landscape mounting.Height adjusts from 47 to 81. 5 in..Locking 4 in. swivel casters for easy movement.Supports up to 110 lb.

Mount-It! MI-875 universal mobile TV cart for commercial and home use. Ideal for conference rooms, schools, hospitals and trade shows. Avoid holes in your walls and use a TV Cart instead. You can roll it from one room to another or roll it outside to your porch, pool, or backyard. The quality silver finish matches most flat screen TVs in their home or office environment. Easy to assemble or disassemble. The TV mount is suitable for TVs from 32 to 70 inches. TV size is provided as an estimate and compatibility of the TV should be verified by checking the bolt hole pattern behind the TV. This mount has adjustable arms and can accommodate bolt hole pattern of VESA 600x400 or smaller. The TV cart has two shelves to help carry AV equipment, such as DVD players, laptop computers, cable top boxes or audio components. The top shelf is for holding a camera for video-conferencing..Rolling Mobile TV Cart with Mount for 32"-70" TVs.TV cart has one durable shelf to help carry AV equipment.Made from premium steel column and legs for maximum stability..The cart offers 19 inches of height adjustment along the pole and 22.5 inches for the shelf, allowing flexible positioning for various setups..This mobile TV cart supports a maximum load of 110 lbs., providing strong and stable support..Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.Portable TV Mounting Solution for Classrooms & Conference Rooms!

Take your TV viewing experience to new heights by mounting your TV on the Promounts Swivel Tabletop TV Stand. The stand is constructed in solid metal with a tempered glass base. It is compatible with VESA patterns between 200x200 and 600x400. This TV stand fits most 37-70” TVs weighing up to 99lbs (45 kg) and comes in a sturdy, modern, & low-profile design. Angle your TV to get the perfect view using the flexible ±25° swivel range built into the stand. Use the built-in cable management system to organize tangled cables to prevent them from obstructing your view. Arrives equipped with all hardware for simple installation. The V-Bat Tech and Locking mechanism provides security for your TV, in addition, it comes with 3 adjustable heights (2.4in/6cm Height Gaps) to choose from. This stand is great for meetings in a board room, classrooms, gaming room, and more..Swivel Tabletop Mount.29'' H X 23.6'' W.99 lbs.

Secure your large display with the Ergotron Neo-Flex Tilting TV Mount, built for screens 37" and larger. With a tilt range up to 15°, it helps reduce glare for better viewing comfort. The universal design supports up to 175 lbs and fits VESA MIS-D/E/F standards. Easy to install with Lift n’ Lock™ technology, it features lateral adjustment, open architecture for cable access, and a locking bar for added security. Ideal for home or commercial setups..Supports tilting wall mount system for large TVs and flat panels.Measures 14.6"H x 33.9"W x 3.2"D for a low-profile wall setup.Holds screens 37" and larger, up to 175 lbs with VESA MIS-D/E/F support.3-year limited warranty for long-term reliability

Don't let the size of your TV dictate where you put it. Capable of supporting TVs up to 100, the PMX700 features two articulating arms that can be horizontally offset to give you the utmost discretion over where your TV is placed. With 31.3 of extension, this full motion wall mount provides enough tilt and swivel movement to ensure you always have the perfect viewing angle. Its low profile design allows your TV to sit 2.6 from the wall when fully retracted and features cable management clips to keep your cables out of sight..Fits most flat panel TVs from 42 to 100.Supports TVs up to 150 lb (68 kg).11 (27.9 cm) of horizontal offset, adjustable horizontal leveling.90 degrees of swivel in either direction, depending on screen size. Accessible tilt mechanism provides +12 degrees to 3 degrees of tilt.Extends up to 31.3 (79.5 cm) from the wall and sits 2.6 (6.6 cm) when fully retracted.Accommodates VESA sizes from 200x100 to 700x500.32.4" (82.3 cm) dual stud wall plate accommodates up to 24 stud spacing.Solid steel construction with durable powder coated finish, integrated cable management, and aluminum covers conceal lag bolts after installation.Installation manual and all mounting hardware for wood studs and concrete installation is included.Product weighs 46.9 lb (21.3 kg).Ten year manufacturer's warranty.cULus certified.Weight: 44.5 lbs..Comes with 10 years warranty.Defy gravity.

R400 is a mount made for Pro's featuring a true no gap installation that allows your TV to sit perfectly flush against your wall for the ultimate low-profile look. Thin TVs like OLED appear to float like a picture frame with no visible hardware. With a recessed box that sits in-between studs, you can store streaming boxes and other small electronic accessories out of sight. Metal knockouts allow you to easily run a power outlet into the box, while rubber grommets handle all other cabling for a completely in-wall, wire-free experience. Durable metal cable management clips on the articulating arms take care of messy cables when the TV is pulled out to its full 18" of extension..The recessed in-wall TV mount features a full-motion articulating arm that extends, swivels, and tilts, allowing your TV to sit flush against the wall for a sleek, low-profile look while offering flexible positioning for optimal viewing angles..The mount measures of 13.3 inches in height, 14.3 inches in width, and 3.5 inches in depth..Supports most 35 to 65-inch flat-panel TVs, holds up to 80 lbs. (36 kg), and accommodates VESA sizes from 100x100 to 400x400..R400 is a true zero gap TV mount that allows TVs with a VESA pattern of 300×300 or less to sit directly against the wall for a completely flush look..400×400 VESA patterns are supported with provided extensions. Using these only increases the profile to 0.3".The recessed box is deep enough to store streaming boxes and other small AV accessories behind the TV for a clean, modern setup..A foldable, in-wall template for new construction can be temporarily placed between studs letting contractors plan cabling and drywall while the mount sits safely in its packaging until needed..Metal knock-outs allow for the installation of power outlets inside the box so you can keep everything needed to power your equipment within the wall..Metal cable management clips run along the length of the articulating arm while rubber grommets within the box help you to route your cabling without any mess..Comes with a 10 years limited warranty.

Looking to store your flat screen TV away? Mount-it! TV wall mount fits the majority of TV displays in the 19 to 42 inch size range. Removable VESA bracket allows easy installation, as well as ability to take the TV out of the mount without removing the mount from the wall - ideal for outdoor installations. It fits VESA 75x75, 100x100, 200x100, 200x200. If you are unfamiliar with VESA patterns, these are square or rectangular patterns between 3 and 8 inches per side. This mount provides 15 inches of extension and collapses to 2 inches from the wall..Supports Screen Size 28-55 Inches.15 Inch Extension from Wall.Tilt: (+/-) 15 degrees Swivel: 180 degrees (from base) Rotate: 360 degrees.Weight: 55 lbs..VESA Compatibility: 75x75, 100x100, 200x200 (mm).Hardware Included: Yes.Fits Samsung, Sony, LG, Vizio, TCL, Element, Sceptre, HiSense and other TV brands.Supported by manufacturer's limited lifetime warranty

Capable of extending 27.6 inches from the wall, the PS400 full motion TV mount offers unparalleled range of motion for screens as large as 70 inches. Extend your TV out of recessed areas or swivel it up to 180° to reach around corners and accommodate angled seating arrangements. A 14° tilt range also helps to reduce glare and further improve line-of-sight with your TV. Sitting 1.9 inches from the wall when fully retracted, the PS400's low-profile design incorporates plastic wall plate covers and integrated cable management to ensure a professional looking setup..IMPROVED VIEWING: Extending 27.6" from the wall, the articulating arm gives you the freedom to pan, swivel and tilt your TV exactly where you want it..LOW-PROFILE DESIGN: Achieve an exceptionally low-profile setup by pushing your TV back to sit 1.9" from the wall..CLEAN SETUP: Cable management clips are provided to conveniently route your cables, while plastic wall plate covers hide any sign of installation..VESA COMPATIBLE: Along with four extension arms for larger TVs, the PS400 ensures compatibility with a wide range of VESA sizes..EVERYTHING YOU NEED: Because every installation is unique, a carefully packaged bolt box is provided, containing all the lag bolts, anchors, washers and spacers you'll need for wood stud and concrete installations.

VB-STND-009 IFP, CDE Slim Mobile Cart, Supports 400x400mm to 1000x600mm VESA patterns, Lockable 4" 360 Degree Caster Wheels, Compatible With Displays up to 105" and 265 lbs. Max, Grey Recommended Display Size: 55" - 105".VESA-MOUNTABLE DESIGN: Features adjustable mounting brackets to accommodate VESA patterns from 400x400-1000x600 weighing up to 265 lbs..SWIVEL AND HEIGHT ADJUSTABLE: Raise and lower your display to improve line-of-sight and accessibility..CONVENIENT STORAGE AND MOBILITY: Includes a steel tray capable of supporting up to 15 pounds with durable and lockable wheels.

Free-standing Monitor Stand with Rotating Base - Full Motion Articulation - Spring-assisted One-touch Height Adjustments This single monitor stand enables you to raise your monitor off your desk or table to save space while increasing your productivity. With its durable aluminum construction and a sturdy base (7.8"x9.4" / 200mm x 240mm), it can support VESA compatible displays up to 32" and up to 15.4lb / 7kg in weight. The power coated black semi-gloss finish on the support column provides a professional and modern look that will match your monitor and workstation. Please refer to our technical specifications section for more information on the different aspect ratios supported. Adjust your monitor to the ideal position The free-standing monitor stand features a wide range of motion so you can position your monitor to the ideal viewing angle, allowing you to work more comfortably and reduce eye and neck strain. You can easily tilt +/-15°; swivel +/-180°; and make height adjustments to fully adjust your monitor so it can meet your ergonomic needs. With a rotating base, this monitor stand lets you swivel your display a total range of +/- 40°. Easy one-touch height adjustments The spring-assisted monitor stand offers a total adjustment range of 10.4" to 16.3" (265mm to 415mm) from the surface or your desk. Height adjustments are easy to make with the built-in easy-access lever at the top of the stand. Keep a tidy setup and protect your desk This monitor stand lets you keep an organized desk/workstation with the built-in cable management slot at the lower portion of the column. It is equipped with rubber anti-slip pads that will keep your desk or table surface protected from scratches or scuffs. FPPNEUSTND is backed by a StarTech.com 5-year warranty and free lifetime technical support..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 32" monitors for versatile use.Height adjusts from 0.4" to 16.34" for comfortable viewing.Comes in black and made of aluminum.-15 to 15 degree tilt and 180-degree rotation adjustment options enable optimal viewing.This bay organize essentials such as pens, clips, etc..Weighs 7.94 lbs..Dimensions: 22.44"H x 7.87"W x 9.45"D.Compatible with: VESA 100 x 100mm mounting patterns.Rubber feet protect desk surface.5-year manufacturer limited warranty

Features: Bring the Presentation to Your Audience :The DMCS60100XX combines a height-adjustable TV stand with the convenience of a rolling cart. Mount a flat-panel television, monitor or interactive whiteboard on this rolling TV cart and bring it to your audience in a classroom, lecture hall, office, conference room or other location where audio/video resources are shared. The DMCS60100XX accommodates most flat-panel displays from 60 to 100 inches, including Promethean whiteboards. It has an aluminum frame and supports up to 220 lb. Effectively Share Audio/Video Resources: An alternative to purchasing multiple displays, the DMCS60100XX allows a large screen and its peripherals to be shared within a facility and stored in a secure area. This heavy-duty TV stand has four sturdy swivel casters that move smoothly through doorways and over thresholds. The casters lock to keep the stand in position while at rest. Each column has a handle to help you guide the cart's movement. Easily Mount Your 60" to 100" Display and Adjust the Viewing Angle :The columns telescope in 2-inch increments, so you can adjust the height of the display mounting bracket from 47 to 65 inches above the floor. For hassle-free display compatibility, this rolling TV stand for flat-screen TVs supports the following VESA mounting hole patterns: 200 x 200, 300 x 300, 400 x 200, 400 x 400, 600 x 400, 800 x 400, 800 x 600 and 1000 x 600. The display angle can be adjusted from +5 deg. to -10 deg. for optimal viewing. Conveniently Place Peripherals and Manage Cables :The upper shelf holds a webcam or small projector. The lower shelf holds a laptop or an audio/video component, such as a Blu-ray player. Add a clamp-on surge protector to the lower shelf to provide power protection for devices. The height of both shelves is adjustable. Cable management openings in the columns allow you to route power and connection cords, reducing clutter for a clean, professional look..Move a display and webcam into a meeting room for web conferencing.Create a temporary digital signage display in an auditorium.Roll an interactive whiteboard between classrooms.Easily move a flat-panel television for storage in a secure area

Mount displays between 26 and 55 inches on any wall and easily adjust viewing angles with this Kanto full-motion TV mount..Full motion single stud mount for most flat panel TVs from 26” to 55”.Solid steel construction with durable powder-coated finish.Supports TVs up to 80 lbs..Accommodates VESA sizes from 100x100 to 400x400.Accessible tilt mechanism provides a -2° to -10° viewing angle.135° of swivel in either direction, depending on screen size.Sits 2” from the wall.Extends up to 19.6” from the wall.Single stud wall plate with 5” offset.Integrated cable management.5-year manufacturer limited warranty.Five year manufacturer's warranty.Mount displays between 26 and 55 inches on any wall and easily adjust viewing angles with this Kanto full-motion TV mount.

Engineered to solve the typical problem of mounting a TV above the fireplace, this mount is designed for effortless height adjustment over your fireplace mantle. The inclusion of a cushioned, insulated handle ensures a comfortable and secure grip, allowing you to easily pull your TV down to your preferred viewing height when it's time to watch. Capable of accommodating medium to large flat panel TVs between 42 and 65 inches and up to 55 lbs, this mount offers the versatility you need. With full motion capabilities including 25.8" total height adjustment, a tilt range between +10 and -5 degrees, and a +/-30 degree swivel left and right, you have the flexibility to discover your ideal viewing angle and reduce glare. The mount supports VESA patterns ranging from 100x100 to 600x500, providing compatibility with a wide array of TVs, and includes provisions for a seamless sound bar installation. Elevate your entertainment experience with this cutting-edge TV mount that combines functionality and aesthetics seamlessly..Fireplace TV mount was designed to solve the typical problem of installing TVs above the fireplace.Easily pull your TV down to a comfortable viewing height using the cushioned, insulated handle.Supports VESA patterns between 100x100 and 600x500 and sound bar installation.A horizontal slide function allows for TV centering above fireplace during the installation process.Large weight capacity makes this mount perfect for large-screen TVs.Cushioned, insulated handles offer protection from fireplace heat, preventing burns.Enjoy 25.8" total height adjustment, a +10°/-5° tilt and +/-30° swivel to find your perfect viewing angle.The distance from the wall ranges from a minimum of 5.7" to a maximum of 22.4.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.A sleek pull-down fireplace mount for perfectly positioned TV viewing!

This recessed TV mount offers the convenience of a traditional wall mount that extends, swivels, and tilts with the clean look of a zero-gap mounting bracket. When not in use, this mount folds out of sight, so your TV looks like a piece of art hanging on your wall. The universal mounting pattern is compatible with all TV brands on the market. Cable management clips conceal your cables against the bracket arms..Supports Screen Size 32-70 Inches.Extension: 26.8" from wall.Weight Capacity: 175 lbs..Tilt: up 5°, down 15°.Swivel: 180°.All Mounting Hardware Included.VESA 200x200, 300x200, 300x300, 400x200, 400x400, 600x200, 600x400.Fits Samsung, Sony, LG, Vizio, TCL, Element, Sceptre, HiSense and other TV brands.Supported by manufacturer's limited lifetime warranty

A great fit for both home and commercial installations, the FMC4 is a full motion TV mount that offers incredible versatility for your wall mounting needs. The adjustable pivot point lets you center your TV perfectly, or move it to either extreme if you need to wrap it around a corner or accommodate off-center studs. Heavy duty solid steel construction means this mount supports up to 100 pounds plenty of strength for today's bigger TVs. With almost limitless swivel capability and 26" of extension, this unique TV mount can meet almost any mounting challenge..Fits most flat panel TVs from 30 to 60.Supports TVs up to 100 lb (45 kg).Sliding pivot point may be moved 20 left or right for flexible installation.Accommodates VESA sizes from 100x100 to 600x400.Sits 3.1 (8 cm) from the wall, extends up to 26 (66 cm) from the wall.Accessible tilt mechanism provides a +10°/5° tilt angle, 135° of swivel in either direction, dependent on screen size.26.8 (68 cm) wall plate accommodates up to 24" stud spacing, solid steel construction with durable powder coated finish.Integrated cable management, adjustable horizontal leveling.Installation manual and all mounting hardware for wood studs and concrete installation is included.Product weighs 21.6 lb (9.8 kg).Five year manufacturer's warranty.Options. Options. Options.

Arrange the position of your TV so everyone has a clear view with this Kanto full-motion TV mount..Full motion dual stud mount for most flat panel TVs from 39” to 80”.Comes in black color.Solid steel construction with durable powder coated finish.Supports TVs up to 125 lbs..Accommodates VESA sizes from 200x100 to 700x400.Accessible tilt mechanism provides a -3° to +15° viewing angle.85° of swivel in either direction, dependent on screen size.Sits 2” from the wall.Extends up to 24” from the wall.Integrated cable management system.5-year manufacturer limited warranty.Installation Manual and all mounting hardware for wood studs and concrete installation is included.Five year manufacturer's warranty.Arrange the position of your TV so everyone has a clear view with this Kanto full-motion TV mount.

Looking for a corner TV wall mount that maximizes your space without sacrificing style or stability? The MI-4471 Full Motion Corner TV Wall Mount is designed to fit screens up to 55”, with support for VESA patterns from 75x75mm to 400x400mm. Built for flexibility, this TV corner wall mount tilts, swivels, and extends for perfect viewing from any angle. Whether you’re mounting your TV in a corner or on a flat wall, this corner wall mount TV is engineered for single-stud installation and supports up to 66 lbs. Ideal for bedrooms, living rooms, or small apartments, this corner wall TV mount gives you a secure and adjustable solution that saves space while enhancing your setup..Full motion corner TV wall mount designed for 26 to 55 inch TVs, offering flexible positioning in corner spaces..Collapses to 3.25" low profile, Extends 15" from the wall..Offers a tilt range of 15 degrees down and 5 degrees up for comfortable viewing..Supports TVs weighing up to 66 lbs..Heavy duty steel construction and high-tech welding technology.Single-stud installation makes this mount ideal for secure and space-saving corner TV setups..Compatible with both corner and flat wall installations for flexible placement options..Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.Full-Motion Corner TV Wall Mount for Flexible Viewing Angles!

This ADA-compliant full motion TV wall mount blends aesthetic appeal and functionality. Its ultra-slim 1.1" profile allows the mounted display to appear weightlessly suspended like art. This minimalist yet articulating mount offers full motion capabilities for an optimized viewing experience from any angle. Swivel, tilt, and extend the screen with smooth adjustments. Robustly engineered, it securely supports displays up to 90" and supports Up to 132 lbs. This heavy-duty TV mount provides a stable, long-lasting foundation for large-screen TVs and digital signage installations..Our Full motion TV mount is wall-mounted with swivel, tilt, and extension features for effortless functionality..The mount features an adjustable height based on TV size and VESA configuration, with a sleek 1.1" profile when retracted and an extension capability of up to 16.5"..The mount Supports TVs ranging from 43" to 90" with a maximum weight capacity of 132 lbs..Supported by Limited Lifetime Warranty..The product is designed to meet ADA standards, ensuring accessibility without sacrificing style or functionality..Our Mount is engineered with high-quality aluminum and steel, making it ideal for both residential and commercial use..The swivel range of +60° to -60° allows for a wide range of side-to-side adjustments for optimal viewing..VESA Compatibility: 100x200, 200x200, 200x300, 300x200, 200x400, 400x200, 300x300, 300x400, 400x300, 600x200, 400x400, 600x300, 600x400 fitting most TV brands and models..The mount offers an adjustable profile ranging from 1.1 inches to 16.5 inches, allowing for convenient placement and extension..Enjoy a tilt range of +3° to -12°, for customizable viewing angles..Includes all the necessary hardware to seamlessly mount the wall at your desired space..Get the best of both worlds. An ultra-slim mount that can swivel, tilt and extend for a fully customizable viewing experience.

Mounting your TV in a corner can be a great way to deal with limited wall space or angled seating arrangements. While some full motion mounts achieve this by being installed on near-by studs, the FMC1's unique 90° wall plate can be mounted squarely in a corner, ensuring a perfectly centered setup with far more flexibility. Suitable for wood stud and concrete walls, the FMC1 features a telescoping support arm that provides adequate space for TVs as large as 60 inches. It's also capable of swiveling left and right, allowing your TV to be pushed up against adjacent walls, and tilting forwards and backwards to reduce glare and improve line-of-sight with your screen..SUPPORTS 88 POUNDS: Constructed out of steel, the FMC1 safely supports 40" to 60" TVs weighing up to 88 pounds, and features adjustable mounting brackets to accommodate VESA sizes from 100a-100 to 600a-400..SIMPLE CORNER INSTALLATION: Unlike other full motion mounts, the FMC1's unique 90° wall plate can be mounted squarely in the corner of any wood stud or concrete wall. Its contoured design ensures each lag bolt can be properly secured, regardless of how your studs are configured..TELESCOPING ARM: The FMC1's telescoping support arm extends 20.4" to 29.8" from the corner, providing enough space for TVs as large as 60"..SWIVELS LEFT AND RIGHT: When sufficiently extended, this full motion TV mount is capable of swivelling up to 90° left and right. This allows you to place your TV against the adjacent walls, or to make simple adjustments to your viewing angle..16° OF TILT: The FMC1 tilts 10° forwards and 6° backwards to reduce glare and improve line-of-sight with your TV..EVERYTHING YOU NEED: Along with a clearly labeled bolt pack, the FMC1 comes with cable management straps and a wall plate cover to keep your viewing area tidy. A step-by-step video is also provided to help you through every step of your instalation.

Free up valuable floor space and position your monitor or TV for greater flexibility and productivity. The Fellowes full-motion TV wall mount fits displays up to 55" and is great for a wide array of spaces and environments. Securely mounts to a wall and easily tucks into tight places. Achieve the perfect viewing position with the depth adjustability. Minimize clutter with the intuitive cord management system..Full-motion TV wall mount designed to make it easier to mount your TV or monitor.Dimensions: 17.88"H x 16.25"W x 19.75"D.Holds a monitor up to 55", maximum load capacity: 77 lbs..Made of heavy-duty steel, comes in black.360-degree rotation makes the transition between portrait and landscape orientation much easier.Allows for tilt, swivel, and levelling adjustment.Securely mounts to a wall and easily tucks into tight places.Minimize clutter with the intuitive cord management system.Meets or exceeds VESA mounting standards.3-year manufacturer limited warranty

This universal TV pedestal stand features a beautiful black silk tempered glass shelf with spacious shelving for all of your surround sound system components. Keep your Blu-ray player, game consoles, cable box, and other media components nearby since this stand is adjustable to allow for extra room wherever it is placed. The built-in TV mount is VESA compatible and fits TVs up to 55" in screen size..TV mount stand is adjustable to allow for extra room wherever it is placed.Dimensions: 24.5"H x 21"W x 5"D.VESA compatible: 100 x 100, 100 x 150, 150 x 100, 150 x 150, 200 x 100, 100 x 200, 200 x 200, 300 x 200, 300 x 300, 400 x 200, 400 x 300, 400 x 400 (mm); compatible screen size: 32" to 55".Weight capacity: 110 lbs..Supports flat or curved screen type.Swivel range: from 30 degrees to -30 degrees.Keep kids and pets safe from knocking over your TV by securely mounting it to your dresser, desk, or other surfaces.Features a beautiful black silk tempered glass shelf with spacious shelving for all of your surround sound system components.Bolt-down base supports cable management to keep your cables organized.Features double lock system.Supported by manufacturer's limited lifetime warranty

Overview The VESA-compliant DWT3780XUL Heavy-Duty Tilt Wall Mount allows you to mount your flat-panel or curved-screen television, monitor or other display on the wall. Recommended for home theaters, classrooms, boardrooms, hotels, bars and restaurants, it fits most displays from 37 to 80 inches. A -10° to 0° tilt capability minimizes glare and provides comfortable viewing from multiple angles. Adjusting the tilt angle is simple using the easy-grip twin knobs located on the wall plate. The mount is concealed behind the display to give a sleek, professional appearance. An open back enables easy access to cabling. Built-in bubble level allows accurate wall plate leveling. Durable all-metal frame with scratch-resistant powder-coated finish supports up to 165 pounds. Mounting hardware included. Conforms to VESA-compliant displays with any of the following mounting hole patterns: 200 x 200 mm, 300 x 300 mm, 400 x 200 mm, 400 x 400 mm, 600 x 400 mm and 800 x 400 mm. This mount has been tested in accordance with UL Standard 2442. Features Mounts Your TV or Monitor to the Wall : Fits most flat-panel or curved-screen televisions, monitors and other displays from 37 to 80 in. Ideal for home theaters, classrooms, boardrooms, hotels, bars and restaurants. Mounts out of sight behind display for sleek, professional appearance. Mounting hardware included. Convenient Angle Adjustment : -10° to 0° tilt capability provides comfortable viewing from multiple angles. Improves viewing angles in applications where audience is below the display. Easy-grip knobs allow simple adjustment of tilt angle. Durable Metal Construction : Supports up to 165 lb. Open architecture enables easy access to cabling. Built-in bubble level for accurate display leveling. Scratch-resistant powder-coated finish. Tested in accordance with UL Standard 2442..Open architecture enables easy access to cabling.-10° to 0° tilt capability for comfortable viewing.Tested in accordance with UL Standard 2442.Supports up to 165 lbs

As the direct manufacturer, Loctek guarantees delivery of the products straight to you. Loctek office furniture products meet the highest quality standards, guaranteed every time. This universal TV cart features four locking wheels for effortless mobility and loading capacity up to 99 lbs..Universal adjustable TV cart made of aluminum in a sleek silver/black finish matching various TV sets.Four locking wheels for effortless mobility.Loading capacity: up to 99 lbs..Equipped with one shelf for holding AV equipment.Build-in cable management system.Universal hole pattern for wider VESA match (300 x 300, 200 x 200, 400 x 200, 400 x 400, 600 x 400mm)

Smart easy-to-assemble stand with a robust, compact design that reduces tripping hazards. A perfect partner to an interactive display in a classroom or an office environment..This heavy-duty mobile stand is a perfect partner to an interactive display in a classroom or an office environment.Supports displays from 55" to 86".Vertical height settings: 58.88"; 55.25"; 51.75".Comes in black.Contains two shelves.Dimensions: 70.75"H x 51.25"W x 25.63".Meets or exceeds UL, REACH, POP, GPSD standards.4"Dia. industrial-grade locking casters for added mobility.Provides up to 297 lb. maximum weight capacity.Computer mounting bracket (VESA 100 × 100 mm) is included.Compatible with SMART Board 6000S and 6000S Pro series, SMART Board MX and MX Pro series, SMART Board GX series, SMART Board 7000R and 7000R Pro series, SMART Board 7000 and 7000 Pro series, SMART Board 6000 and 6000 Pro series interactive displays.5-year manufacturer limited warranty

Designed to accommodate TVs ranging from 40" to 80" in screen size and weighing up to 121 lbs, this full motion wall mount is built to withstand the test of time. Its extra long arm extends an impressive 38.77" from the wall, ensuring optimal flexibility in positioning your TV. With an up to +/-180° swivel and +5/-10° tilt feature, you have the freedom to find the perfect viewing angle and minimize glare. Installation is made easy with the included large wall plate, ideal for mounting on 16" or 24" studs. This versatile mount even allows you to mount you TV in a corner. The dual arm design ensures your TV is safely installed and prevents any sagging when the TV is extended. Additionally, the mount offers VESA compatibility between 200x200 and 600x400, making it suitable for a wide range of TVs. For added convenience, the arm can be manually adjusted on the wall plate, allowing you to effortlessly achieve the ideal position for your viewing pleasure. Say goodbye to limitations and embrace the perfect TV mounting experience..This full motion wall mount features an extended dual-arm design that offers smooth, flexible positioning, ideal for mounting TVs in corners or open living spaces..This sturdy TV wall mount with extra long extension holds displays between 40" and 80" screen size and up to 121 lbs in weight.Fits most 40" to 80" TVs weighing up to 121 lbs; compatible with VESA patterns from 200x200 to 600x400. (200x200, 300x300, 400x200, 400x400, 600x400).Offers +/-180° swivel, +5/-10° tilt, and +/-5° leveling for optimal screen positioning and glare reduction..Comes with a large wall plate for installation on 16" or 24" studs.Includes free 6ft HDMI cable, Velcro straps and bubble level.Dual arm design prevents sagging when arm is extended.Supported by Manufacturer's Limited Lifetime Warranty..Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Transform your space with the Mount-It! MI-397 — a full motion TV mount designed for flexible, comfortable viewing from anywhere in the room.

Mount-It! Camper RV Articulating TV Wall Mount is specifically designed to keep your TV safely stowed away while your motorhome, vehicle or boat is moving. This mount can tilt, swivel, extend, and retract to be positioned in almost any viewing angle. This heavy-duty steel frame supports up to 77 lbs and the VESA extender plates accommodate larger TVs from 23 to 43 inch screen sizes. The detachable VESA head bracket makes it convenient to remove the entire TV for long term storage..TV SIZE RANGE: 23" to 43" LED LCD PLASMA TVs.LOCKABLE ARM: Locks for transportation.EXTENSION: 2.3" to 15.7".TILT: +10/- degrees.SWIVEL: +/- 90 degrees.VESA COMPATIBILITY: 75x75,100x100,200x100,200x200 (mm).Fits Samsung, Sony, LG, Vizio, TCL, Element, Sceptre, HiSense and other TV brands.Supported by manufacturer's limited lifetime warranty

Arrange a keyboard, work surface, and two screens to create an ergonomic workstation with this dual-arm stand, which can easily lift monitors up to 20 inches off the desktop. The arms of this Ergotron WorkFit-A dual monitor stand can be used to swivel the whole workstation to either side and to keep screens out of the way when they are not in use..This dual monitor stand with tray and worksurface clamps to the rear or side of most surfaces and enables an effortless sit-and-stand work style.Supports up to 24" monitors for versatile use.Lift range: monitors and keyboard tray adjust 20" in tandem, monitor adjusts 5" independently.Durable, easy-to-clean exterior composed of aluminum, high-grade plastic, and powder-coated painted steel.180-degree pan, 360-degree rotation, and 30-degree tilt adjustment options enable for optimal viewing.Includes a worksurface for additional space and a keyboard tray with three tilt positions that sits below the desktop height for the best ergonomic positioning.Each arm securely holds up to 10 lbs. to fit most monitors (25 lbs. total load on height-adjustment assembly).Overall dimensions: 45.25"H x 28.8"W x 43.7"D (fully extended).Compatible with standard VESA mounting patterns: 100 x 100 and 75 x 75.Meets VESA MIS-D mounting standard.Black/polished aluminum finish completes overall aesthetic appeal.Easily clamps to the front of any surface 0.78–2.6" thick.5-year manufacturer limited warranty.Customize screen viewing for sitting or standing work with this Ergotron WorkFit-A dual monitor stand.