Wire Management Channels
66 results
Double-sided capable Horizontal cable managers with 6" deep cable fingers include double-sided configuration hardware to install (2) alike horizontal cable managers back-to-back for double-sided applications.Dimensions 88 mm(H) x 482 mm(W) x 165 mm(L).Black.Rear pass-through cable slots Cable access slots in the backplane provide improved accessibility from the front to the rear of the enclosure for cable routing.Cable protection Smooth plastic fingers provide proper bend radius.Trouble-free access Covers with snap hinges provide trouble-free access to cables.High capacity cable finger design Cable managers feature high capacity slim cable fingers to provide maximum capacity at every rackspace unit and a rigid design to decrease deflection when cables are routed in out of the cable manager channel.Includes double-sided cable manager configuration hardware, installation guide, mounting hardware.Certification RoHs, reach.Warranty Lifetime limited.Warranty Lifetime limited.APC® AR8606 Horizontal Cable Manager has a rear pass-through cable slots to provide improved accessibility from the front to the rear of the enclosure for cable routing.
APC® Vertical cable manager is compatible with 2/4 post open frame racks. Vertical cable measuring 84" x 6" x 11.3" includes door, mounting hardware and installation guide..Compatibility: APC 2 and 4 post open frame racks.Dimensions: 84"(H) x 6"(W) x 11.3"(D).Black.Material: Plastic.Supports toolless installation of AR8444 fiber spools.Smooth plastic fingers provide proper bend radius.Door installs quickly without tools and hinges from the left or right to allow access inside the vertical cable manager channel.Vertical cable managers are packaged unassembled and designed with a simple snap together design for rapid onsite assembly and installation.Pass-through holes and mounting slots support horizontal cable troughs for front-to-back cable pass-through using cable management accessory AR8016ABLK.Includes cable manager, door, installation guide, mounting hardware.Certifications & standards: REACH, RoHS.Weight: 15.7 lbs..6" wide, high-capacity vertical cable manager for 2 and 4 post open frame racks features a single-sided cable channel with multiple internal cable tie-off locations and smooth plastic fingers at 1U increments for organized patching applications.Warranty: 2 years limited.APC® Vertical cable manager measuring 84" x 6" x 11.3" is designed to support toolless installation of fiber spools.
The Cord Channel allows you to easily organize and conceal cords on the wall. Add or remove cables without complicated procedures and easily access cords with the flexible opening. It's great for both home and office settings..Easy to mount on your wall using 3M double-sided foam tape that is provided.Add or remove cords in the future from the slit without complicated procedures.Flexible material makes installation simple to do. Simply adjust the length of the Cord Channel using a pair of scissors.Extend single cords from the channel midway from the front opening if you need to re-route to different location or to plug to an electrical outlet.Paintable to match with decor.Size: 10 feet.Color: Paintable White.Product Type: Cable Management
Improve the efficiency of cooling system by covering unused rack space..Improve the efficiency of cooling system by covering unused rack space.Rack height: 1U.Material: Steel.Dimensions: 1.7"(H) x 19.1"(W) external, 0.8"(D) internal, 19"(W) Panel.Black.Sturdy steel construction.Applications: Use with server racks and cabinets, structured wiring closets and network distribution cabling to keep cables neat and tidy.Separate and organize cables through a dense nylon brush strip.Mounting options: Front mount.Reduce dust accumulation near valuable server equipment with nylon bristles that surround cables.Includes: 1U brush strip horizontal server rack cable management panel, 4 x 10/32 panel screws, 4 x 12/24 panel screws.Certifications and standards: EIA RS310-D, CE, RoHS, Green compliant.Weight: 14.1 oz..Warranty: 2 years limited
StarTech.com® 2U Horizontal finger duct rack cable management panel in black color mounts to a standard 19" 2 or 4-post rack to organize horizontal cabling, through a covered cable duct. Features a removable top cover that holds it easy to add or remove bundled cables quickly. Helps to increase the longevity of server and networking equipment interfaces by providing cable strain relief. Includes one horizontal cable duct, four M5x15 screws, M5 cage nuts, M6x15 screws and M6 cage nuts..Cable management panel is perfect to organize horizontal cabling, through a covered cable duct.Comes in black color for new look and is made of sturdy steel for durability.Measures 3.5"H x 19"W x 3.1"D.Features front mounting for easy installation.Utilizes 1U rack height for designating the usable space.Includes removable top cover that helps for easy adding or removal of bundled cables quickly.Provides a series of fingers on either side, as well as pass-through holes at the back to helps to route cables.Offers better solution for your server room or wiring closet.Used to mount standard 19" 2 or 4-post server racks.Use the fingers on either side or the rear pass - through holes to detache and route cables easily.Maximize the longevity of server and networking equipment interfaces by offering cable strain relief.Contains horizontal cable duct, 4 x M5x15 screws, 4 x M5 cage nuts, 4 - M6x15 screws, 4 x M6 cage nuts fro reliable operation.Meets RoHS Compliant and is CE listed.Weighs up to 33.7 oz.Comes with 2 years warranty.StarTech.com® 2U Horizontal finger duct rack cable management panel in black color is made of high-quality steel for durability. Comes with 2 sets of rack screws.
Expandable Flexi Cable Wrap wraps around bundles of cables or cords to keep them organized. Made from a soft and flexible material, Flexi Cable Wrap leaves no plastic cuts from sharp edges on your fingers when inserting cords. No complicated tools are needed for installation. It’s a smart expandable system that easily self wraps and conforms to bundle cords..Overlapping wrap that is expandable for either small or large groupings of cords. Expandable diameter 0.5 - 01 inch.Soft and flexible rubber material that is easy to insert cords without plastic cuts.Allows cables to breakout and reroute midway.Cut to desired length with a pair of scissors to wrap entire length or sections of cords.Size: 12 feet.Color: White.Product Type: Cable Management.Overlapping wrap that is expandable for either small or largegroupings of cords. Expandable diameter 0.5 - 01 inch.Cut to desired length with a pair of scissors to wrap entire lengthor sections of cords
This Cable Management Tray enables you to have a tidier desk while keeping your cables and power bars off the floor, avoiding wire tangles and trip hazards. With an area of 23.6"L x 4.5"D x 3"H (60cm x 11.4cm x 7.6cm), this cable manager offers enough room to keep all your cords in one place. It supports laptop adapters, power bars, video/printer/charge cables, and it is compatible with height adjustable standing desks..Keep loose cords in order with these cable management tray.Comes in black and made of steel.76cm length for convenient use.Meets or exceeds RoHS standard
Create an organized work area by neatly routing cords in this 17"L cable management trough. This trough includes one wire access cut-out to provide access to the trough without having to detach it from the worksurface. It attaches easily with screws to the underside of a HON worksurface..Graphite Finish.The troughs attach to underneath the worksurface with screws.Cutouts in trough allow access to power without the need to detach from surface. 17′′W = 1 cutout
Wire or cable management is a tedious and painful process to keep track of, so simplify it with the Schneider Vertical Cable Manager for Netshelter SX 750mm Wide 48U. This accessory is especially useful for offices and large establishments which run several servers to handle high end critical applications. This vertical cable manager for the Netshelter range of rack enclosures is very durable, and efficiently manages the cables of the terminal server chassis components. It comes in a 2-quantity vertical rack, measures 43 x 6.5 x 8 inches and keeps the cables neatly tucked in and manageable..Color: Black.Dimensions: 78.38"H x 23.6"W x 42.12"D.Units per pallet: 1.Weight: 11.61 lbs..Tuck in your server cables with the Schneider Vertical Cable Manager for Netshelter SX 750mm Wide 48U, for easy cable manageability
Keep bundles of cords and cables from multiple office computers out of the way with this fully expandable cable wrap. Made with bendable rubber, this UT Wire cable wrap can be cut to a desired length with scissors..Durable cushioned wrap for protecting cables from foot traffic and chewing pets.Cable wrap made of soft and flexible black rubber makes it easy to insert and route cables.Cable wrap length: 12'.No plastic cuts from sharp edges, no cable ties, zippers, or Velcro needed.The smart expandable system easily wraps and conforms to a bundle of cords.Expandable diameter: 0.5"-1".The self-closing design makes it easy for cables to break out and reroute midway; no scissor cut or damage to the sleeve needed.Organize cable clutter in the office or at home with this black 12-foot UT Wire Flexi Cable Wrap.
Conceal cords inside this charging box to reduce clutter. The top has three slots you can pull the cables through to connect your devices. This UT Wire In-Box charging station also has a groove to help keep devices secure and upright..Cable organizer hides messy, loose, tangled cables under the desk, next to the computer, or behind the TV.Made of black plastic.Cable management length is from 1' to 1.9'.Fits most standard six-outlet power strips (power strip and chargers are not included).Three slots at the top let you easily plug in and organize wires to power all of your electronics: tablets, smartphones, and MP3 players.The top groove is designed to prop up your devices.Stash a power strip inside this UT Wire In-Box charging station for discreet access to sockets.
For flexible mounting options, the cable ring features a right-angled mounting bracket with 2 sets of mounting holes, enabling you to face the D-ring in the direction that best fits your application..Constructed of high-quality steel.Cable manager type: D-ring.Black.Rack height: 1U.Dimensions: 2 1/2"(H) x 4"(W), 100 mil (T).Material: Steel.For flexible mounting options, the cable ring features a right-angled mounting bracket with 2 sets of mounting holes, enabling you to face the D-ring in the direction that best fits your application.Providing strain relief for attached cables, multiple cable rings can be attached to your rack where you need them for a versatile cable management solution.Add an internal or external facing cable management hook for strain relief and organization.Multi-directional vertical cable management d-ring lets you add an internal or external facing cable hook to your server rack or cabinet, to provide an organized channel for cables.Ideal for structured wiring closets and network distribution cabling.Includes cable hook, 2 x 10/32 screw, 2 x 12/24 screws, 2 x 24/24 cage nuts.Certifications and standards: EIA RS310-D, CE, RoHs, green compliant.Weight: 6.1 oz..Warranty: 2 years limited.Features: Face detection, Platform supported: PC, Mac.Weight: 4.3 oz..Warranty: 1 year limited
Innovation® First 1U horizontal cable management arm can be attached to either the right or the left side of the rack. Arm has a mounting depth of 19 - 69 mm and includes instructions, hardware kit which can be used for a wide range of requirements..Material : Steel, anodized metal.Dimensions: 19"(W) panel.Cable manager type: Cable management arm.1U (H) rack.Mounting side : Left or right.Numerous methods to attach the cable management arm to most devices.Multiple configurations.Cable management arm three different models for most applications.Cable management arm crossbars are designed for static mounted equipment.Certifications and standards: EIA-310.Silver.Innovation® First 1U horizontal cable management arm is designed for equipment on slide rails and allows you to secure networks cables.
Wiremold OFR Series Overfloor Surface Raceway System provides four-channels of capacity and access to a wide range of power, communications, and A/V connectivity options in the smallest, lowest, narrowest, ADA compliant profile available in overfloor raceway systems. This system installs over existing floor coverings and is both tamper-resistant and installer-friendly, making it an ideal solution for relocatable or permanent installations where access through floors and ceilings is not an option..Designed for cable management, this overfloor raceway system offers four channels for power, communications, and A/V connectivity, making it ideal for relocatable or permanent installations where access through floors and ceilings is not possible..Comes in black color and is made from durable materials designed to withstand commercial use..The length is 8 feet..Cable Routing allows you to effectively utilize most of the space available with maximum dependability.Raceway cable manager type offers a practical wire organization solution that is adaptable to your space.Comes with a 1-year limited warranty.
The Staples TECH Cable Management 30-pack is the only cable management kit you will need. Including the Staples TECH rubber cord cover, the Staples TECH mesh cord sleeve and the a variety of cable clips and fasteners, this kit incudes the tools you need for a completely organized work space. Staples TECH Cord Cover: With a rounded rubber surface that prevents snags and tripping, this cord cover can safely adhere to wood floors, carpets, walls, and tabletops. The self-adhesive backing makes installation simple, and the durable rubber construction ensures long-lasting protection; Staples TECH Mesh Cord Sleeve: This cord sleeve is made of expandable mesh and can secure up to 7 cords, while also being durable enough to withstand pulls, snags, and heat from regular use; The Staples TECH cord sleeve can also be cut to your desired length, making it customizable to your needs and space; Staples TECH cord clips: Included in various to meet all your needs. The smaller clips hold thinner cords like phone chargers, and the larger clips hold thicker cords like extension cords. Also included is a 10-ft roll of hook & loop adhesive. Experience the high-quality and dependability of Staples TECH, with the Cable Management 30-pack . Backed by Staples Brands 100% satisfaction guarantee, or your money back..30-piece kit offers complete solution to your cable management needs.All components are made of durable and long-lasting materials for optimal protection and a professional look.Includes one 6 ft rubber cord cover, one 10 ft mesh cord sleeve, two 10 ft of hook and loop adhesive, 10 cable hooks, and 16 cable clips in assorted sizes:.6 single slot clips for large cords.4 double slot clips for large cords.2 double slot clips for small cords.2 triple slot clips for small cords.Backed by Staples Brands 100% Satisfaction Money Back Guarantee.2 five slot clips small cords.The Staples TECH Cable Management 30-pack is your complete solution for cable management
APC® Deep Single Sided Horizontal Cable made of plastic to provide proper bend radius.Cable measuring 4.3" x 3.5" x 18.3" feature high capacity slim cable fingers to provide maximum capacity at every rackspace unit..Dimensions: 4.3"(H) x 3.5"(W) x 18.3"(D).Black.Rack size: 19".Rack height: 2U, 4" deep.Features cable tie-off and cable access slots in the backplate for front to back cable pass-through.Cable access slots in the backplane provide improved accessibility from the front to the rear of the enclosure for cable routing.Smooth plastic fingers provide proper bend radius.Covers with snap hinges provide trouble-free access to cables.Feature high capacity slim cable fingers to provide maximum capacity at every rackspace unit and a rigid design to decrease deflection when cables are routed in/out of the cable manager channel.Includes: Double-sided configuration hardware to install alike horizontal cable managers back to back for double-sided applications.Compliant standards: RoHS, REACH.Weight: 0.89 kg.Warranty: 2 years repair or replace.APC® Deep Single Sided Horizontal Cable Manager With Cover in black color measuring 4.3" x 3.5" x 18.3" is designed with Cable access slots to provide improved accessibility from front to rear enclosure for cable routing.
Organize network and power cables on a 19" rack or cabinet with this StarTech 1U horizontal cable lacing bar with variable depth. Organize cables and reduce cable and connector strain by mounting this lacing bar between rack-mounted patch panels, servers, and NAS devices. Tether cables to the cable management bar using cable ties or hook-and-loop fasteners to enhance the airflow to mission-critical equipment..Organize network and power cables on a 19" rack or cabinet with this 1U horizontal cable lacing bar with variable depth.Can be installed inwards or outwards relative to the rack mounting posts for optimal cable routing, reduced clutter, and improved airflow.Dimensions: 1.7"H x 19"W x 3.8"D.Box contains: lacing shelf, four M6 screws, four M6 cage nuts, four M6 plastic washers, four M4 screws, quick start guide.Horizontal cable lacing crossbar allows for variable depth of the horizontal bar relative to the rack mounting posts (depth adjustable from 1.5" to 3.7"; fixed side bracket depth of 3.78").Use with patch panels, servers, switches, NASs, PDUs, KVMs, and more.Eliminate sharp cable bends at connector ends and alleviate port/connector stress by securing the cables.Features lacing points spaced 0.3" along the cable guide bar.SPCC steel construction allows the cable support bar to bear the load of all cable/cable bundle types.Powder-coated black finish for long-term durability.2-year manufacturer limited warranty
The UT Wire slinky cable wrap is a flexible cable wrap for grouping together many cables into one manageable bundle, which makes it great for desktop computers and TV entertainment systems. Fits all small and large cable bundles to suit various electronic environments at home. Soft, flexible, and stretchable - all in one small package..Flexible cable wrap for grouping together many cables into one manageable bundle, which makes it great for desktop computers and TV entertainment systems.Comes in black and made of fire-retardant rubber.2' long.Won't cut like plastic cable wraps and makes for easy installation.Fits all small and large cable bundles to suit various electronic environments at home.Perfect for sit-to-stand desks.Easy to break out and redirect cables from the bundle wherever needed.No special tools needed to install
The UT Wire cable slinky is a stretchy cable wrap for grouping together many cables into one management bundle, great for desktop computers and TV entertainment systems. Soft, flexible, and stretchable, all in one small package..Flexible cable wrap for grouping together many cables into one manageable bundle, which makes it great for desktop computers and TV entertainment systems.Comes in white and made of fire-retardant rubber.Length: 2'.Won't cut like plastic cable wraps and makes for easy installation.Fits small and large cable bundles to suit various electronic environments at home.Perfect for sit-to-stand desks.Easy to break out and redirect cables from the bundle wherever needed.No special tools needed to install
Smooth plastic fingers of this APC® 1U horizontal cable manager offer proper bend radius to ensure cable protection. The included double-sided cable manager configuration hardware lets you connect two alike horizontal cable managers back-to-back for double-sided applications. High capacity slim cable fingers offer maximum capacity at every rack space unit while rigid design minimizes the deflection after routing the cables in/out of the cable manager channel. Covers with snap hinges of this 19" single-sided cable manager provide easy access to the cables. It comes with installation guide and mounting hardware..Dimensions: 4.3"(H) x 1.7"(W) x 18.3"(D).Black.Rack size: 19".Rack height: 1U, 4" deep.Features cable tie-off and cable access slots in the backplate for front to back cable pass-through.Cable access slots in the backplane provide improved accessibility from the front to the rear of the enclosure for cable routing.Smooth plastic fingers provide proper bend radius.Covers with snap hinges provide trouble-free access to cables.Feature high capacity slim cable fingers to provide maximum capacity at every rackspace unit and a rigid design to decrease deflection when cables are routed in/out of the cable manager channel.Includes: Double-sided configuration hardware to install alike horizontal cable managers back to back for double-sided applications.Compliant standards: RoHS.Weight: 1.02 kg.Warranty: 2 years repair or replace.Horizontal cable manager organizes patch cords and cables in a rack and cabinet while allows for reconfiguring and maintenance.Made of durable black plastic.Length: 19".Compatible with APC NetShelter SX enclosure with sides.Includes two double-sided configuration hardware to install alike horizontal cable managers back-to-back for double-sided applications.Slim cable fingers provide maximum capacity at every rack space unit and a rigid design to decrease deflection when cables are routed.The APC® 1U horizontal cable manager is perfect to keep the data cable layout organized within an enclosure or a rack. It covers with snap hinges to offer easy access to cables.
For organizing wires for home entertainment systems and media devices like the Apple TV, smart home streaming devices, Bluetooth speakers and more, look no further than the UT Wire Cable Station Pro. A reusable cable clip, the Cable Station Pro has five slots that fit most HDMI, USB, Ethernet, audio, and power cords to keep them organized, separate, and from slipping out of reach. To better identify each cable, you can also write on it. With its special adhesive, this wire organizer can easily be mounted onto tabletops and other flat furniture surfaces. If you want to reposition or remove a wire, just carefully peel the cable holder off. The adhesive won't leave residue, so there's no need for any cleanup. Should the adhesive lose its stickiness, just wash the adhesive side of the cable holder, and let it dry to refresh and reuse..With five slots to separate and store individual cords, this cable holder can organize various hotspots to reduce wire clutter.Comes in dark gray and made of rubber with restickable tape.Dimensions: 0.5"H x 4"W x 2"D.Fit most HDMI, USB, Ethernet, audio, and power cords to keep them organized, separate, and from slipping out of reach.Write directly on the cable holder to easily identify cables, so there's no need to guess which one is which.Special adhesive is pre-applied and allows this cord organizer to be removed and reused with ease; if the adhesive loses its tackiness, just gently wash the adhesive side with water, and let it dry to refresh and reuse.Leaving no residue, adhesive removes cleanly from furniture and tabletop surfaces
Tuck messy cords into this three-channel protector with different units that secure cables to the floor while allowing easy identification and access. Install this UT Wire 180" cord protector in just minutes to ensure that floors are safer..Cord protector and concealer keeps floor areas clear and safe.The flexible material with a black finish easily applies and lays flat on any floor surface.Cord protector length: 15', simply adjust with scissors.Three individual channels for storing, organizing, and easy identification of cords.Main channel is the largest compartment for cables that you are less likely to move around, and two top-loading channels offer you the ability to remove cords from channels for any future adjustments.Eliminate tripping hazards by installing this UT Wire 180" black cord protector.
With more and more electronics settling into homes and offices, surge protectors and power strips inevitably warp into cable clutter hotspots. For these necessary plug-in points, the UT Wire In-Box cable organizer box is a great cable management solution to preserve the visual organization of space. With two side slots and the top flip door, the In-Box cable organizer box offers three access points for flexible cable directing from the enclosed surge protector. Simply place the surge protector into this cable concealer, arrange the cables out one of the three points, and voila. From desk cables to TV entertainment systems, where there is a surge protector, this box can organize it..Create a tidy environment below your desk, next to your computer, or behind your entertainment center by hiding all your cords from sight with this cable organizer box.Made of plastic and silicone in black.Dimensions: 5.38"H x 16.38"W x 6.5"D.Fits most standard power strips with six to 12 outlets.Features a specialized flap on the lid to access wires.Offers three access points for flexible cable directing from the enclosed surge protector.Power strip and chargers are not included
Create your own cable station on your desktop with the Cable Station 2 to organize messy and tangled cords from computers, chargers, routers, monitors, speakers, telephones, or entertainment systems..Mount it flat on the top, side, or back of your desks and media stands using the double-sided tape that is included.5 slots to store individual cords separately.Extend or remove individual cords without tangled cords.Writable to easily identify cords.Holds cords in place so they won’t slip under the desk.Size: 2.75 inch.Color: Gray.Product Type: Cable Management
StarTech.com 1U Horizontal cable management panel has a removable top cover that allows the user to add and remove the bundled cables easily. Panel comes with a series of fingers and passes through holes required for routing cables..Cable management panel.Help you organize horizontal cabling, through a covered cable duct.Hardware: 1U height, mounting options: Front mount (front only).Physical characteristics: Black colored, enclosure type: Steel.Compatibility: Mounts to standard 19" 2 or 4-post server racks.Finger duct plus rear pass-through holes for routing cables.Add or remove bundled cables quickly, with a removable top cover.1U rack design, sturdy steel construction.Separate and route cables easily, using the fingers on either side or the rear pass-through holes.Increase the longevity of your server and networking equipment interfaces by providing cable strain relief.Organize cables in your server rack or cabinet with a horizontal, covered cable duct.Dimensions: 19"H x 1.9"W x 2.4"D.Includes: 1 x horizontal cable duct, 2 x M5x15 screws, 2 x M5 cage nuts, 2 x M6x15 screws, 2 x M6 cage nuts.Certifications and standards: EIA RS310-D, CE industry standards.Weight: 23.7 oz..Warranty: 2 years.StarTech.com 1U Horizontal cable management panel has a sturdy steel construction for enhanced durability and can be easily mounted on standard 19", 2 or 4 post server racks.
Innovation® First 2U horizontal cable management arm can be attached to either the right or the left side of the rack. Arm has a mounting depth of 19 - 69 mm and includes instructions, hardware kit which can be used for a wide range of requirements..Material: Steel.Dimensions: 19"(W) panel.Cable manager type: Cable management arm.2U(H) rack.Mounting side : Left or right.Extension: 724 mm to 838 mm in 6.35mm increments.Numerous methods to attach the cable management arm to most devices.Configurable for a wide range of requirements.Allows cables to be managed in a neat and organized manner, cable management arm is designed for equipment on slide rails.Mounting depth : 19mm - 69mm.Includes instructions and hardware.Certifications and standards: EIA-310.Silver.Innovation® First 2U horizontal cable management arm is designed for equipment on slide rails and allows you to secure networks cables.
The Compact Cord Protector protects cords on the ground and keeps floor areas clear and safe. Our unique flexible material makes installation a breeze and easily applies and lays flat on any flooring surface. No more tripping on loose cords across the floor..Easily adjust the length simply using a pair of scissors.Smaller, more compact profile.Capability to remove cords from the top-loading channels for future adjustments.Inner compartment measures 0.59x0.23 inches.Size: 5 feet.Color: Beige.Product Type: Cable Management
Use this cord protector to organize wires running through your office in a neat and secure way. Openings built into the protector make inserting the wires simple, and the adhesive back keeps the protector from moving around on the floor. This UT Wire cord protector creates a smooth, flat surface to make it easy to walk over the cords without pulling them out of the wall accidentally..Cord protector and concealer keeps floor areas clear and safe.The flexible material with a black finish easily applies and lays flat on any floor surface.Cord protector length: 5', simply adjust with scissors.Three individual channels for storing, organizing, and easy identification of cords.Main channel is the largest compartment for cables that you are less likely to move around, and two top-loading channels offer you the ability to remove cords from channels for any future adjustments.Keep cords from being damaged on your floor with this UT Wire cord protector.
This flexible and lightweight cable-management sleeve, made of polyester and nylon fabric, provides an easy and inexpensive solution for managing cable clutter. Use it to keep cables organized behind your computer monitor, while still providing access to cables when needed. The extra-long 15 ft. (4.6 m) cable sleeve is trimmable, providing flexible use in a wide range of applications. The flexible cord concealer helps you keep cables and wires hidden, anywhere you work. Organize cables at your workstation, above and below your desk. Manage cables in an AV studio. Keep electrical cables organized in a networking setting. You can use the cable sleeve for a single cable, or multiple cables (up to 10 depending on thickness). Simply open the rolled fabric from the side to guide your cables through. The flexible cable sleeve automatically recoils to wrap around your cables. It can also expand to cover additional cables as needed. There are no tools required, and the cables don't need to be disconnected from the computer to be inserted into the cable-management sleeve. Using sharp scissors, you can cut the cable-management sleeve to your desired length, to fit neatly under your desk or table, or behind your media center..Organize loose cords with this cable concealer.Comes in black and made of polyester.Dimension: 15.1'L
Say goodbye to unsightly cable clutter with UT-Wire D-Wings—nail-free cord clips designed to guide and secure your cords effortlessly across any flat surface. Whether you're organizing audio/video cables, chargers, lighting cords, or holiday lights, this 18-piece set (12 small and 6 large clips) offers a clean, damage-free solution using strong double-sided foam tape that sticks securely and removes cleanly. With a front-opening design for easy cord access and flexibility to round corners or stick to walls, desks, or furniture, D-Wings are perfect for renters, tech lovers, and anyone who wants a tidy, streamlined space without the hassle of nails or screws..Nail-Free Cord Management: Secure and guide cords without damaging walls—no nails, screws, or tools required..Peel-and-Stick Installation: Installs in seconds with strong double-sided foam tape that sticks securely and removes cleanly..Flexible Cord Routing: Easily guides cords around corners and across flat surfaces like walls, desks, and furniture..Assorted Clip Sizes: Includes 18 pieces - 12 small clips for thin cords and 6 large clips for thicker cables..Universal Compatibility: Perfect for organizing audio/video cables, chargers, lighting cords, power cables, and holiday lights..Paintable and Discreet: Available in white or black and can be painted to match your décor..Ideal for Renters and DIYers: Great for temporary setups or permanent solutions without wall damage..D-Wings are cord organizers to hold and guide loose cords across any flat surface, such as walls or desks. Simply peel, stick, and stay. Use it for audio / video cords, chargers, lighting cords, power cables, holiday lights, etc.
APC® Vertical cable manager includes cable retainers with snap hinges and top securing bracket. Cable manager has rack height of 42 U and has dimensions of 34.9”H x 4.4”W x 6”D which is compatible with netshelter SX 750mm wide..Cable managers feature high capacity slim cable fingers to provide maximum capacity at every rackspace unit and a rigid design to decrease deflection when cables are routed in/out of the cable manager channel.Cable manager type: Cable pass-through.Black.Material: Plastic.Dimensions: 70"(H) x 3.8"(W) x 6.3"(D), Rack height: 42U.Compatibility: APC NetShelter SX enclosure.Optional hinging left or right covers - covers install quickly without tools and include two easy to use latches that allow the cover to open to the left or right.Dedicated cable manager for each enclosure height - Dedicated cable managers for each enclosure height 42U, 45U, and 48U, provide the maximum u-space coverage.Backplate optimized for accessorizing - Backplates feature multiple holes for toollessly mounting accessories such as cable managers for cable tie-off and airflow management brush strips to allow cable pass-through.Secure cabling with easy access - secure cabling inside the cable manager with the provided snap hinge cable retainers that open to the left or right for easy access.Package contents: Vertical cable manager for NetShelter SX 750mm wide 42U (Qty 2), installation guide, mounting hardware, 6 x cable retainers with snap hinges, top securing bracket.Certifications and standards: REACH, RoHS.Weight: 9 lbs..Warranty: 2 years limited.Open Frame.APC® Vertical cable manager in black color has smooth plastic fingers at 1U increments and allows patch cords to enter and exit in an organized manner.
15 FT CORD PROTECTOR- BEIGE.Adjust the length simply using a pair of scissors.Three individual channels create extra storage and allow for easy identification of cords.Capability to remove cords from the 2 top-loading channels for any future adjustments needed.Hassle-free installation: Cord Protector lays flat on the floor and installs in seconds!!.Size: 15 feet.Color: Beige.Product Type: Cable Management.The Cord Protector protects cords on the ground and keeps floor areas clear and safe. Our unique flexible material makes installation a breeze and easily applies and lays flat on any flooring surfaces. It also comes in a variety of colors to easily blend into any setting. No more tripping on loose cords across the floor.
The Mount-It! cable management tray is the perfect solution to keep your workspace clean, organized, and free from messy cables. Its open design ensures proper ventilation, preventing overheating of power adapters and cords, while also allowing easy access when you need to adjust or swap out devices. This versatile cable organizer clamps securely to the back of most desks, including Mount-It! standing desks and other popular desk brands, with no tools or drilling required. Once installed, it seamlessly blends with your desk, maintaining a sleek and professional appearance. Cut-outs allow for easy cable routing and whether you're managing cords for a dual-monitor setup, docking station, or other electronics, this wire organizer is built to handle it all. Crafted from durable materials, it provides a sturdy solution for power strips, surge protectors, and cable bundles, making it an essential addition to any office or home workstation. Stay productive and enjoy a clutter-free desk with this reliable under-desk cable organizer..This under-desk cable management tray keeps cords, adapters, and power strips organized and out of sight, helping you maintain a clutter-free and efficient workspace..Made from durable steel and ABS in a sleek matte black finish for strength and long-lasting use..Measures 23.6" long, providing ample space for multiple cables, adapters, and surge protectors..The pack includes a single unit for individual use..Clamps securely to desks 0.2"–1.97" thick, compatible with the standing desks and most other popular brands..No tools or drilling required for installation, installs in seconds for effortless setup..Ideal for managing cables from monitors, docking stations, and other electronics in office or home environments..Supports up to 11 lbs, easily accommodating surge protectors and bundled cords..Sleek and minimal design blends seamlessly with modern workstations for a professional look..Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by Manufacturer's Limited Lifetime Warranty..Keep your workspace neat and professional with the Mount-It! Cable Management Tray, an easy, tool-free solution for organizing cables and power strips under your desk.
The Mount-It! MI-7282 under-desk management system is manufactured to provide you with an easy-to-place, hang, and adjust platform for your wires. Featuring multiple cutouts along the edge and open ends for cable pass-through, your cords stay discreetly hidden but still easily accessible. You'll be able to store wires away without taking up additional room on your desktop. Hang on the crossbar of a sit-stand desk, or attach directly to your desktop where you need it. This tray makes optimal use of the space under your desk, giving you the freedom to place more important things around your workstation..Cable tray hides unwanted cables and cords under your desk.Made of a high-grade black steel.Dimensions: 2.9"H x 23.2"W x 4.2"D.Features multiple cutouts along the edge and open ends for cable pass-through.Installs within minutes: hang on the crossbar of a sit-stand desk, or attach directly to the desktop.Supported by manufacturer's limited lifetime warranty
5 FT COMPACT CORD PROTECTOR- DARK GRAY.Easily adjust the length simply using a pair of scissors.Smaller, more compact profile.Capability to remove cords from the top-loading channels for future adjustments.Inner compartment measures 0.59x0.23 inches.Size: 5 feet.Color: Gray.Product Type: Cable Management.The Compact Cord Protector protects cords on the ground and keeps floor areas clear and safe. Our unique flexible material makes installation a breeze and easily applies and lays flat on any flooring surface. No more tripping on loose cords across the floor.
Checkers® Guard Dog® 3-Channel low profile cable protector in orange/black color has dog-bone connectors that could reach to any desired length. Protector measures 1.25" x 13.8" x 36" and features modular interlocking design for easy setup..Orange lid with black ramps.Cable protector with standard ramp.Polyurethane construction.Reinforced hinged lid for easy cable placement.Dimensions: 1.25"H x 13.8"W x 36"L.D channel: 1.25"W, E channel: 0.75"H.Dog-bone connectors to extend to any desired length.Protects cables and hoses up to.75" outside Dia.Modular interlocking design for easy setup.High load-bearing capacity.Satisfies state and federal regulatory agencies.Patented 5-bar tread surface for maximum traction.Has a load capacity of 17000 lbs./tire and 34000/axle at 70 deg F.ADA compliant symbols molded into ramps.Universal safety colors for high visibility.Weight: 12.2 lbs..Checkers® Guard Dog® 3-Channel low profile cable protector with standard ramp in orange/black color is designed for protecting cables and features durable polyurethane construction.
Checkers® Guard Dog® 1-Channel low profile cable protector in orange/black color has dog-bone connectors that could reach to any desired length. Protector measures 1.25" x 10.81" x 36" and features modular interlocking design for easy setup..Orange lid with black ramps.Cable protector with standard ramp.Polyurethane construction.Reinforced hinged lid for easy cable placement.Dimensions: 1.25"H x 10.81"W x 36"L.D channel: 2.25"W, E channel: 0.75"H.Dog-bone connectors to extend to any desired length.Protects cables and hoses up to.75" outside Dia.Modular interlocking design for easy setup.Satisfies state and federal regulatory agencies.Patented 5-bar tread surface for maximum traction.Has a load capacity of 13000 lbs./tire and 26000/axle at 70 deg F.ADA compliant symbols molded into ramps.Universal safety colors for high visibility.Comes with standard ramps.Weight: 7.8 lbs..Checkers® Guard Dog® 1-Channel low profile cable protector with standard ramp in orange/black color is designed for protecting cables and features durable polyurethane construction.
5 FT CORD PROTECTOR- BEIGE.Adjust the length simply using a pair of scissors.Three individual channels create extra storage and allow for easy identification of cords.Capability to remove cords from the 2 top-loading channels for any future adjustments needed.Hassle-free installation: Cord Protector lays flat on the floor and installs in seconds!!.Size: 5 feet.Color: Beige.Product Type: Cable Management.The Cord Protector protects cords on the ground and keeps floor areas clear and safe. Our unique flexible material makes installation a breeze and easily applies and lays flat on any flooring surfaces. It also comes in a variety of colors to easily blend into any setting. No more tripping on loose cords across the floor.
Organize loose cords with this cord cover protector. Built-in tracks make it easy to place cords inside the cord protector for quick installation, and the flat design makes it easy to walk over the cables without tripping or to roll over them without getting your chair stuck. Open channels in this UT Wire cable cover protector let you swap out the cords again and again for extended use..Cord protector and concealer keeps floor areas clear and safe.The flexible material with a dark gray finish easily applies and lays flat on any floor surface.Cord protector length: 5', simply adjust with scissors.Three individual channels for storing, organizing, and easy identification of cords.Main channel is the largest compartment for cables that you are less likely to move around, and two top-loading channels offer you the ability to remove cords from channels for any future adjustments.Manage cords running throughout your office with this UT Wire cord cover cable protector.
Checkers® Guard Dog® 2-Channel general-purpose cable protector in orange/black color has dog-bone connectors that could reach to any desired length. Protector measures 1.25" x 28.38" x 36" and features modular interlocking design for easy setup..Orange lid with black ramps.Cable protector.Polyurethane construction.Reinforced hinged lid for easy cable placement.Dimensions: 1.25"H x 28.38"W x 36"L.D channel: 1.5"W, E channel: 0.75"H.Dog-bone connectors to extend to any desired length.Protects cables and hoses up to.75" outside Dia.Modular interlocking design for easy setup.Patented 5-bar tread surface for maximum traction.Has a load capacity of 23000 lbs./tire and 46000/axle at 70 deg F.ADA compliant symbols molded into ramps.Comes with standard ramps.Weight: 22.85 lbs..Checkers® Guard Dog® 2-Channel low profile cable protector with built-in ADA ramp in orange/black color is designed for protecting cables and features durable polyurethane construction.
Using hook-and-loop fasteners, this UT Wire carpet cord cover is designed to stick to carpeting without any adhesives. Simply apply over wires running along the floor, and press down to secure. Remove, adjust, and reuse with ease with no adhesive residue left behind..Cord cover designed to secure cables running across the carpet in place and prevent tripping.With polyester exterior, rubber foam padding, and hook-and-loop fastener, the cover offers a three-layered cushioned protection in gray.5' long.Removal, reuse, and adjustments are easy and leave no adhesive residue behind.Fits up to three Ethernet or HDMI cables or one power cable.Suitable for loop pile and combination loop carpet; unsuitable for cut pile carpet
Checkers® Powerback two channel duct protector measures 7/16" x 3" and includes 1/4" x 7/16" channel for organizing portable cables/cords. 10' Protector is lightweight and grooved underside for reducing tripping hazards in various applications..Duct protector.Material: Non-Metallic, industrial-grade flexible rubber.Usage: Multiple communication lines or 14 through 22 gauge wire.Dimensions: 7/16"H x 3"W, Channel: 1/4"H x 7/16"W.Length: 10'.Protects and organizes portable cords and cables.Reduces tripping hazards.Two channel.Grooved underside for better traction.For lightweight vehicles, carts and pedestrian traffic at home, offices, warehouses, theaters, convention centers, shopping malls, and other public, commercial and industrial applications.Lightweight and durable.Weight: 3.7 lbs..Warranty: 1 year limited.Checkers® 10' Powerback two channel duct protector in black color is made of rubber for durability and is perfect for enclosing multiple communication or 14 through 22 gauge wire.
Here's a fast, easy solution to organizing your cables. This spiral cable management sleeve wraps around your cables to tidy up your work area, while protecting your cords from abrasion. The expandable sleeve is conveniently sized: This coiled cable sleeve is also available in other diameters and lengths to suit your needs: 25 mm Diameter x 2.5 m Length (1" x 8.2') - CMSCOILED2; 45 mm Diameter x 1.5 m Length (1.8" x 4.9') - CMSCOILED3; 45 mm Diameter x 2.5 m Length (1.8" x 8.2') - CMSCOILED4. The flexible and expandable cable cord organizer will hold multiple cables and gauges, from thin phone chargers to thick power cords. Create a tidy workspace in minutes to keep your cables neat, and still accessible, within the attractive coiled sleeve. It's a great way to provide a neat appearance for cables and equipment wiring in offices, lobbies, boardrooms, and customer-facing areas. Keeping your cables in a cable management sleeve keeps them concealed, and protects them from wear and tear under your TV or desk. Open up the side of the cable tube concealer any time, to access, add or remove cables. You can also create a breakout of cables at any point in the sleeve to re-route or replace cables. The wire management sleeve comes with a time-saving cable loading tool. You simply slide the tool along the spiral wrap to guide your cables through the cabler hider sleeve. You can also trim the sleeve to the desired length. Made of durable polyethylene, the cable cover sleeve is easily reusable..Organize loose cords with this cable sleeving kit.Comes in black and made of polyethylene.Dimensions: 4.9'L.Meets or exceeds RoHS and REACH standards
Here's a fast, easy solution to organizing your cables. This spiral cable management sleeve wraps around your cables to tidy up your work area, while protecting your cords from abrasion. The expandable sleeve is conveniently sized: This coiled cable sleeve is also available in other diameters and lengths to suit your needs: 25 mm Diameter x 1.5 m Length25 mm Diameter x 1.5 m Length (1" x 4.9') - CMSCOILED; 25 mm Diameter x 2.5 m Length (1" x 8.2') - CMSCOILED2; 45 mm Diameter x 1.5 m Length (1.8" x 4.9') - CMSCOILED3 . The flexible and expandable cable cord organizer will hold multiple cables and gauges, from thin phone chargers to thick power cords. Create a tidy workspace in minutes to keep your cables neat, and still accessible, within the attractive coiled sleeve. It's a great way to provide a neat appearance for cables and equipment wiring in offices, lobbies, boardrooms, and customer-facing areas. Keeping your cables in a cable management sleeve keeps them concealed, and protects them from wear and tear under your TV or desk. Open up the side of the cable tube concealer any time, to access, add or remove cables. You can also create a breakout of cables at any point in the sleeve to re-route or replace cables. The wire management sleeve comes with a time-saving cable loading tool. You simply slide the tool along the spiral wrap to guide your cables through the cable hider sleeve. You can also trim the sleeve to the desired length. Made of durable polyethylene, the cable cover sleeve is easily reusable..Organize loose cords with this cable sleeving kit.Comes in black and made of polyethylene.Dimensions: 8.2'L.Meets or exceeds REACH and RoHS standards
Checkers® 3 Channel grip guard measuring 2.26" x 18.21" x 36" has load capacity of 5000 lbs and includes 2.25" D/2.25" E channels for efficient operation. Grip guard is fuel/lubricant resistant and is ideal for protecting cables/hoses of 2.25" Dia..Yellow/grey.Grip guard.Made from tough, high-impact-absorbing, non-conductive polyurethane.Resistant from oil, fuels and lubricants.Dimensions: 2.26"H x 18.21"W x 36"L.D channel: 2.25"W, E channel: 2.25"H.Optional anti-slip traction kit for use on slick surfaces.Protects cables and hoses up to 2.25" outside Dia.Recessed carrying handle molded in to the underside of the protector.New snap fit hinged lid, no fiberglass rod required to replace the lid.New gripper connector system with easy hand-conforming grip.Patented 5-bar tread surface for maximum traction.Has a load capacity of 5000 lbs./tire and 10000/axle at 70 deg F.Lightest 3-channel cable protector by up to 50%.Certifications and standards: RoHS and SVHC compliant.Weight: 23 lbs..Protects cables and hoses up to 2.25" outside Dia.Checkers® 3 Channel grip guard in yellow/grey color is snap fitted with hinged lid for easy handling and is made of high-impact-absorbing/non-conductive polyurethane for added durability.
Keep all your accessories organized and tangle-free. Simply stick these Vivitar cable organizers to your desk or bedside and slide your cables through. No more reaching behind your desk for cables. Mountable with no sticky left behind..Keep loose cords in order with these cable organizers.Comes in black.Eight cable organizers of two different sizes per pack.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The MI-7280 cable management spine will help keep your workspace and desk organized. The cord manager orderly routes power cords, electrical, AV cables, and more from the floor to your laptop or monitor. The flexibility of the cable manager provides protection and strain relief for your cables. The snap-together segments allow you to match the height to your desk. The flexible segments are ideal with sit-stand desks as well. The under desk cable management system includes a mounting plate that attaches to the underside of your desk, table or counter keeping things securely in place..Organize loose cords with this cable organizer.Comes in black and made of ABS plastic.Length: 50.5".Modular design for spine adjustment.Supported by Manufacturer's Limited Lifetime Warranty.Keep your workspace clutter-free and stylish from floor to desk.