Workgroup Switches

10/100/1000MBps.Connect computers and other devices so data can be shared at the highest speeds.Compatible with virtually any major network operating system.Accelerate your desktop network with Gigabit connectivity for up to 8 devices.All ports have auto speed negotiation and auto MDI/MDI-X crossover detection

Yields up to a remarkable 200MBps bandwidth in full duplex mode.Connect computers and other devices so data can be shared at the highest speeds.Compatible with virtually any major network operating system.Accelerate your desktop network with Gigabit connectivity for up to 5 devices.Protect your PCs from downed network segments through auto-partitioning

The TRENDnet TPE-TG240G Ethernet switch is a rack mountable switch that has sturdy metal construction. It has 24 Gigabit PoE+ ports and works on 370 W power. It includes LED indicators to indicate port status. All Gigabit ports generate a 48 Gbps switching capacity and have jumbo frames up to 10KB..Managed Gigabit Ethernet switch.24 ports, 24 x PoE+ (RJ-45), 24 x Gigabit Ethernet network.Dimensions: 1.7"D x 17.3"W x 9.8"D.Power: 120 - 230 VAC (input voltage), power source: Power supply, PoE budget: 370 W, power consumption: 36 W.Meets CE, FCC standards.Media type supported: Twisted pair, network technology: 10/100/1000Base-T, Ethernet technology: Gigabit Ethernet.Layer supported: 2.Form factor: Rack-mountable, desktop.Network standard: IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x.Jumbo frame: 10KB, MAC address: 8K entries, switching capacity: 48 Gbps.PoE circuit sorting protection, PoE overcurrent protection, rugged.Includes TPE-TG240g, quick installation guide, rack mount kit, power cord.Weight: 8 lbs..Comes with lifetime limited warranty

This Brainboxes Industrial SFP Gigabit Ethernet Switch is a fast, low cost, future-proof way to deploy long network segments. Connect to wide variety of fibre optic and copper cable types. It provides high speed data connection over extended distances. Support techologies to reduce susceptibility to electromagnetic interference.Unmanaged switch with 4 x gigabit Ethernet, and 1G SFP ports.Integral DIN mount and slim design takes up minimal cabinet space.Power Consumption: 3.6W Max: 720mA@+5VDC/120mA@+30VDC.Meets or exceeds UL62368-1, CSA C2.22, RoHS standards.Industrial temperature range: -40ºF to +176ºF - works in extreme conditions.Jumbo Frame support up to 9K frames.SFP Port Power Overcurrent protection.Lifetime limited warranty

This switch is an unmanaged full Gigabit Ethernet hardened PoE+ switch that complies with IEEE 802.3at and IEEE 802.3af. The switch has (8) 10/100/1000Base-T PoE+ ports with two 100/1000 dual speed SFP slots. It can deliver up to 30 Watts on each PoE+ port simultaneously. The SISTP1040-382-LRT can be used at the edge of a hardened network to provide connections for PoE devices in hazardous locations. The two fiber uplink ports can also be used in a daisy chain for maximum network reliability. It has redundant input power connections to ensure safe reliable operation in temperatures between -40°C and +75°C. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other hazardous environments..Support Jumbo Frame up to 9K bytes.Layer 2 wire-speed switching engine.Ruggedized metal closure.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

The SISPM1040-582-LRT is a full managed PoE++ switch suitable for connecting and powering devices in hardened environment. It has (8) 10/100/1000 PoE++ ports with (2) 100/1000 dual speed SFP slots. The switch can supply up to 90 Watts per port on four ports or 60 Watts per port on eight ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments..IPv4/IPv6 dual protocols.Supports Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

+5 to +30 Volt Power Input enables the device to be run from a standard car battery - ideal for in vehicle applications Tough metal casing with removable numbered power terminal for easy wiring Integral DIN mount and slim design takes up minimal cabinet s.5 Port 10/100 Mbs Ethernet Switch.Redundant dual power inputs: +5V to +30V DC.Compact design with integral DIN mount.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

This switch is a next generation rack mount hardened switch with 136Gbps switching capacity. It provides (24) 10/100/1000 PoE+ ports, (4) 100/1000 dual speeds SFP ports, It has additional (4) 1G/10G SFP+ slots..IPv4/IPv6 dual protocols.Supports Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Fast, low-cost, future-proof way to deploy long network segments. Connect to a wide variety of fibre optic and copper cable types for high-speed data connection over extended distances. Galvanically Isolated Ethernet Ports. Automatic detection of data transmission speed: 10/100/1000 Mbps. Wide temperature range of -14ºF to +140ºF and dual input redundant power supply with wide voltage range means it can be powered from USB or on the 24V factory floor. Power terminal is removable with numbered pins for easy wiring. Power consumption is optimised based on the status of the link device. No software required. Ideal for factory floor, in vehicle and marine applications..Unmanaged switch with 4 x gigabit Ethernet, and 1G SFP ports.Integral wall mount or optional DIN rail mount.Power Consumption: 3.6W Max: 720mA@+5VDC/120mA@+30VDC.Meets or exceeds UL62368-1, CSA C2.22, RoHS standards.Industrial temperature range: -14ºF to +140ºF - works in extreme conditions.Jumbo Frame support up to 9K frames.SFP Port Power Overcurrent protection.Lifetime limited warranty

+5 to +30 Volt Power Input enables the device to be run from a standard car battery - ideal for in vehicle applications Tough metal casing with removable numbered power terminal for easy wiring Integral DIN mount and slim design provides Ethernet connecti.8 Port 10/100 Mbs Ethernet Switch.Redundant dual power inputs: +5V to +30V DC.Compact design with integral DIN mount.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Brainboxes 5 Port Mountable Unmanaged Ethernet Switch.5 x RJ45 jack, 10/100 MHz autosensing, crossover auto-sensing.Certification and Standards: CE, IEEE 802.3/802.3u, RoHS, WEEE, Microsoft Certified Gold Partner, AEO.Form factor: Wall and rail mountable.Media type supported: Twisted Pair.Expansion slots: 5 x fast ethernet network.Layer supported: 2, Screw terminals: 3.5 mm pitch, #22 - #14, 0.5 - 2.5 sq. mm pin power supply.Power source: AC adapter, Power input: 5 - 30 VDC input, reverse polarity protected, Power consumption: 1.1 W, Current: 220 mA at 5 VDC/36 mA at 30 VDC.Dimensions: 4.3"(H) x 4"(W) x 1.1"(D), 1500VRMS magnetic isolation from Ethernet.Temperature: 0 - 60 deg C operating, 0 - 70 deg C storage, Ambient relative humidity: 5 - 95% (non condensing).Wire thickness: 0.15", 3.81 mm, 20 pins, 12+8 screw terminal,, #26 - #16 AWG, 0.14 - 1.3 sq. mm.Link/activity LED: Solid green(connection established), flashing green(data communication), Speed LED: Green 100Base-Tx, unlit 10Base-T.Power terminal is removable with for easy wiring and no software required.Allows simultaneous communication across the switch, improving bandwidth.Ideal for factory floor, in vehicle and marine applications.Includes quick start guide.Weight: 4.66 oz..Warranty: Lifetime limited.Brainboxes 5 Port Unmanaged ethernet switch is a wall mountable device and can be used to control the flow of network traffic based on the address information in each packet.

The SISPM1040-362-LRT is a full managed PoE+ switch suitable for connecting and powering devices in hardened environments. The switch can supply up to 30 Watts per port on all four PoE ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments..Store-and-Forward Architecture with 16 Gbps Switching Bandwidth.Supports Jumbo frames up to 9.6K Bytes.Ring Protections: Industry standard G.8032 Ethernet Ring Protection Switching (ERPS), Support G.8031 Ethernet Linear Protection Switching (EPS), Rapid Ring with recovery time less than 20ms.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

CyberData 3-Port gigabit Ethernet switch is fully compatible with IEEE 802.3u standard and features 10/100/1000 full duplex with RoHS Compliant. Switch has 1.4 Gbps high performance memory bandwidth and consumes less power..3-port auto-negotiating (no crossover cablerequired).USB or PS/2 mouse-powered(no external power supply required).VLAN Packet Forwarding.USB A to B cable included.Each port has auto MDX - any port can beused as the uplink connection.All ports are 10/100/1000 Mbps auto sensingbased upon the port's individual connection.Interfaces/ports: 3 x RJ45, 1 x USB-B.Dimensions: 1.1"(H) x 3.78"(W) x 2.75"(L).Compatibility: PC.Media type supported: Twisted pair, Ethernet technology: Gigabit Ethernet, network technology: 10/100/1000Base-T.Power: 350 mA at 5V (supplied by a USB or PS/2 port).LEDs: Link, status and connection speed.Operating temperature: -10 - 50 deg C.Form factor: Wall mountable.Input voltage: 5 VDC, power source: USB.Certifications and standards: IEEE 802.3u, RoHS.Includes: 3 port Gigabit Ethernet switch, USB A to B cable.Weight: 0.2 lbs..Warranty: 2 years limited.CyberData 3-Port gigabit Ethernet switch is powered through a PC's USB or PS/2 mouse and has LEDs that shows the link, status as well as connection speed.

Expand your network capacity with the help of 8 networking ports and transfer your data quickly and easily.Supports optical fiber cable to span longer distances and provided high data transmission rates between servers and network components.Up to 10x faster than standard Ethernet server connectivity while providing high-performance uplinks.Managed switch provides a reliable foundation for your network

Pure compatibility, pure stability, pure design. The perfect fit for any stable, future-proof system, even where space is limited..This unmanaged Gigabit Ethernet switch features five ports, supports speeds of 10/100/1000 Mbps, and operates without the need for configuration..Data transfer rate of 10/100/1000 Mbps, supporting Gigabit Ethernet speeds.It has a mega compact form factor, measuring just 55 x 55 x 16 mm (2.17 x 2.17 x 0.63 inches), which is smaller than a standard business card..Designed for straightforward plug-and-play operation without the need for configuration.With a throughput of 10/100/1000 Mbps, this device supports Gigabit Ethernet speeds and operates in a non-blocking layer 2 mode, ensuring efficient data transfer without packet loss..Maximum power consumption of 3.3W.Industrial operating temp (-40 °C to +85 °C / -40°F to +176°F).Seamless integration with design software - logical placements and fixed distances.Board to board and board to cable connection.LEDs visible in all orientations – can be directed to outer casing via fiber optics or light pipe, or electrically wired.Comes with a 10 year limited warranty

Light Industrial/Commercial Ethernet 8-port unmanaged switch. Galvanically isolated ports. Power supply with wide voltage range means it can be powered from USB or on the 24V factory floor. Power terminal is removable for easy wiring. Power consumption is optimized based on the status of the link device. No software required. Perfect for factory floor, in vehicle and marine applications. Wall mountable using mounting screw holes, optional DIN Rail mount accessory available..Light industrial/commercial Ethernet unmanaged switch.Eight 10/100Mbps Ethernet ports.Dimensions: 4.3"H x 3.9"W x 1.2"D.Wide power input: 5-30VDC.Meets or exceeds Microsoft Certified Gold Partner, WEEE, RoHS, AEO (C-TPAT), CE, METL, UL 60950-1 standards.IP30 nonconducting polyamide casing prevents electrical conduction, for safer installation.No software needed: simply plug in any Ethernet cable.Power consumption is optimized based on the status of the link device.All Ethernet ports are Auto MDI/ MDIX supporting straight through or crossover Ethernet cables.Easy wire removable screw terminal block.Wall-mount holes compatible with MK-048 DIN mount clips.Lifetime manufacturer limited warranty

The Transition Networks® SISPM1040-384-LRT-C gigabit Ethernet managed switch is suitable for powering and connecting devices in hardened environments. This switch with 8 POE ports and 4 SFP ports, supports jumbo frames up to 9.6K bytes and supports G.8031 Ethernet linear protection switching. This black switch simultaneously supplies power to all the 8-ports, up to 30 W for each port. The hardened switch is perfect for factory floors, outdoor enclosures or other challenging environments. It includes embedded Device Management System (DMS) software, which provides advanced tools required for management of all IP addressable devices..Gigabit Ethernet managed switch is suitable for connecting and powering devices in hardened environments.8 x 10/100/1000Base-T PoE+, 4 x 100/1000Base-X SFP ports, RJ-45 serial console.Management: VLAN, Private VLAN Edge, Voice VLAN, GVRP, Web, SNMP v1,v2c,v3, Telnet, CLI, DMS, security: HTTPS/SSH v1/v2, IP source guard.Backplane: 24 Gbps.Dimensions: 5.4"H x 2.4"W x 5.3"D.Power consumption: 11 W (Max) without PoE.Meets EMI, CE, FCC Part 15, EN61000-4-2, EN61000-4-3, EN-61000-4-4, EN61000-4-6, IEC60068-2-32, EN50155, EN50121-4, NEMA TS-2, IEEE1613 standards.Power supply: 24 VDC, 1 A digital output, 48 to 57 VDC input.VLANs: 4000.Protocols: Supports LLDP, TCP/UDP source, DSCP/IP precedence.Indicators: Status LEDs - system, power 1, ring master, coupling, power 2, alarm, port status.Mac address: 8K, jumbo frames: 9.6KB.Layer supported: 2, color: Black.Temperature rating: -40 to 75 deg C operating, -40 to 85 deg C (storage), humidity: 5 to 95% (non-condensing).Weight: 2.2 lbs..Comes with 5 year warranty.Black 8-port gigabit Ethernet managed switch supports Jumbo frames up to 9.6 KB, LLDP protocol, port mirroring and port based network access control.

Easily deploy or scale your network with this Gigabit Ethernet switch, by adding eight copper Gigabit Ethernet (GbE) connections, including four PoE+ ports. This IP30 industrial network switch provides intelligent Layer 2 management. Its rugged, compact design and wall-mount option with front access make it ideal for demanding applications, even where space is limited. Expand your network This Gigabit Ethernet switch lets you expand your network by connecting up to eight RJ45 devices (four PoE+). The 8-port switch enables up to eight users to share files and devices, such as printers and scanners, over a LAN connection, by enhancing your existing network capacity with additional ports. Supports PoE+ for flexible use The switch gives you the freedom to place your equipment in locations where power outlets are not available, with support for Power over Ethernet Plus. The network switch provides abundant PoE power, with up to 30 watts for each PoE port (120W budget). Wall-mountable with front access With its compact design, you can wall-mount the Gigabit switch to provide convenient front access to ports and indicators. It's ideal for a wide range of applications, including tight installation areas with significant electromagnetic interference, such as control cabinets and panels. The network switch is also DIN-rail mountable. Efficient Layer 2 management The switch delivers efficient and stable performance, with Layer 2 management capabilities. This lets you control packet traffic on a busy network, and customize your settings to achieve optimal network performance, offering improved efficiency and reliability. Rugged industrial design This rugged network switch features an IP30-rated metal housing and extended operating temperature range of -40°C to 75°C, which makes it ideal for a wide range of conditions. The sturdy metal enclosure offers durability, even in harsh industrial environments. Reliable connection for seamless network performance With support for 10/100/1000Mbps transfer speeds, this managed switch supports full/half-duplex auto-negotiation, jumbo frames, and auto MDI/MDIX operation. This lets you connect your network devices quickly and easily, with little to no configuration required. To help prevent any unnecessary downtime, the switch features redundant 12-58V DC terminal block power inputs, which ensures seamless operation in the event of power dips or failures. The IES81GPOEW is backed by a StarTech.com 2-year warranty and free lifetime technical support..Expand your network with 8x RJ45 (4 PoE+) ports in one Gigabit network switch.PoE power up to 30W per PoE+ port (120W budget).Rugged IP30 industrial design with metal housing and extended temperature range (-40 degreesto +75 degreesC)

This Transition Networks Lantronix eight 10/100/1000Base-T port switch with Auto-MDI/MDIX is an unmanaged multi-port switch that can be used to build high-performance switched networks. This switch is a store-and-forward device that offers low latency for high speed networking. It is designed for the core of the network backbone computing environment to solve traffic block problems at SME (small, medium enterprise) businesses..Eight-port 10/100/1000BASE-T switch with Auto-MDI/MDIX is an unmanaged multi-port switch that can be used to build high-performance switched networks.Eight gigabit ports provide a 16Gbps switching capacity to support edge network installations.Power consumption: 3.5W.Meets or exceeds the LVD, FCC, CE, and UL standards.Supports full and half duplex for 10/100Mbps and full duplex for 1000Mbps.Wire-speed packet filtering and forwarding rate.Supports jumbo frames up to 9KB.5-year manufacturer limited warranty

The HP J9986A 24-port managed Gigabit Ethernet switch is perfect for data networking and has data transfer rate up to 1 Gbps. It is compatible to use with 5400R zl2 switch series. This switch supports Gigabit Ethernet 1000Base-T technology for reliable data transfer. It includes RJ-45 1000Base-T network LAN ports for connectivity..Gigabit Ethernet switch ensures to provide enterprise-class resiliency and innovative flexibility as well as scalability to mobile-first networks.Dimensions: 1.8"H x 10.3"W x 8.1"D.Compatible with PC.Has 24 RJ-45 autosensing 10/100/1000 PoE+ Gigabit Ethernet ports for connectivity.Features Freescale P2020 dual core at 1.2 GHz, 16MB flash, 1GB SD card and 4GB DDR3 SODIMM for reliable performance.Latency: 1000MB latency: < 2.8 us, 10 Gb/s latency: < 1.8 us, 40 Gb/s latency: < 1.5 us.Throughput: Up to 1142.8 Mpps.Switching capacity: 1920 Gb/s, Switch fabric speed: 2030 Gb/s.PoE+ internal power supply delivers constant power.Media type supported: Twisted pair, Ethernet technology: Gigabit Ethernet, Network technology: 10/100/1000Base-T.Form factor: Plug-in module.Contains HP 5412R zl2 switch and three HP 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 module J9986A.REACH and Green compliant.Weight: 45.19 lbs..Comes with lifetime limited warranty

Cisco Catalyst C9200L switch extends the power of intent-based networking and hardware and software innovation to a broader set of deployments. With its family pedigree, Cisco Catalyst C9200L switch offers simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Cisco Catalyst C9200L switch helps customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Cisco Catalyst C9200L switch provides security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Cisco Catalyst C9200L switch gives you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 80 Gbps, Layer 3 feature support, and cold patching, Cisco Catalyst C9200L switch is the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access..48x 10M/100M/1G Ethernet switch with fixed 4 x 1G uplink ports extends the power of intent-based networking and hardware and software innovation to a broader set of deployments.Dimensions: 1.73"H x 17.5"W x 12.9"D.Comes in gray.IP unicast routing protocols (including static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng, and Open Shortest Path First [OSPF], Routed Access) are supported for small network routing applications with the Network Essentials stack.Offers resiliency with field-replaceable units (FRU), redundant power supply, and fans.Features flexible downlink options with data, PoE+, or mGig.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Switch has enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Features advanced network monitoring using Full Flexible NetFlow.Get simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE) and network assurance and improved resolution time through Cisco DNA Center.Plug-and-Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.Common Licensing based operating system for the enterprise (Cisco IOS XE) supports for model-driven programmability and streaming telemetry.ASIC has programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, access-control lists (ACLs), and quality of service (QoS) entries.Lifetime manufacturer limited warranty

The D-Link 16-Port Gigabit Switch (DGS-1016D) delivers power, performance, and reliability in one cost-effective, space-saving design. Increase the speed of your network server and backbone connections, or make Gigabit to the desktop a reality. Users in the office, workgroup, or creative production environment can now transfer large bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network without hesitation. The versatile and compact 1RU height design of the DGS-1016D enables the device to be rack mounted in a standard 19-inch rack while conserving valuable rack space..16-Port Gigabit Switch.16 Ports - Gigabit Ethernet.Media Type Supported Twisted Pair.Network Technology 10/100/1000Base-T.Dimensions: H 1.75" , W 11", D 7.1". Weight: 2.97lb.Limited lifetime Warranty

Features 24 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Up to 10x faster than standard Ethernet server connectivity while providing high-performance uplinks.Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree.Managed switch provides a reliable foundation for your network.Built-in power supply to ensure all components are being supplied with accurate voltage

Features auto-negotiation, auto-sensing/device detection, flow control, packet filtering, and store-and-forward capabilities..5 x 10/100/1000Base-T.128KB buffer.Interfaces/ports: 5 x Network (RJ-45), 5 x gigabit Ethernet network.Data transfer rate: 2000 Mbps (full-duplex).Filtering address table: 8K MAC entries/device.Dimensions: 1.2"(H) x 7.8"(W) x 4.5"(D).Power: 5 VDC, 1 A, power consumption: 4.5 W.Media type supported: Cat 5 twisted-pair.Protocol: CSMA/CD.LED indicators:/port: Link/Activity/Speed,/device: power.Management: QoS: 802.1p (4 Queues), Priority queuing.Form factor: Desktop, wall mountable, MTBF: 593,755 hours.Supports jumbo frame packets (max size up to 9.6KB).Network technology: 10/100/1000Base-T Gigabit Ethernet.Certification & standards: FCC Class B, ICES-003 Class B, CE Class B, C-Tick Class B, VCCI Class B, cUL, CB.Weight: 0.57 lbs..Warranty: Lifetime limited.Warranty: Lifetime limited.1.1"(H) x 3.8"(W) x 3.9"(D).Limited lifetime warranty.D-Link Five-Port Unmanaged Switch - Easy Networking

Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations..Managed Gigabit Ethernet switch offers improved performance and advanced automation and security for your access network while delivering reliable connectivity to all your branch office devices.Equipped with 24 x Gigabit Ethernet ports.Forwarding rate: 95.23Mbps, switching capacity: 128Gbps.Dimensions: 1.73"H x 17.5"W x 13.8"D.Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Advanced network monitoring using full Flexible NetFlow.Simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE).Network assurance and improved resolution time through Cisco DNA Center.Plug-and-Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.Cisco IOS XE: a Common licensing based operating system for the enterprise Cisco Catalyst 9000 product family with support for model-driven programmability and streaming telemetry.ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.Perpetual licensing package includes the Network Advantage licensing option that is tied to the hardware.Lifetime manufacturer limited warranty

Brainboxes 4 Port industrial unmanaged Ethernet switch operated with AC adapter or USB power source is perfect for factory floor, in vehicle or marine applications. Switch supported with integrated DIN rail mount uses twisted pair media..Dimensions: 3.5"(H) x 4.5"(W) x 0.9"(D).Form factor: Rail mountable.Interface/ports: 4 x RJ-45, 4 x Fast Ethernet network.Layer supported: 2.Network technology: 10/100Base-TX, Media type supported: Twisted pair.Ethernet technology: Fast Ethernet.Input voltage: 5 VDC.Power source: AC adapter, USB.Operating temperature: -30 - +80 deg C.Power consumption: 1.1 W, 220 mA at +5 VDC/36 mA at +30 VDC maximum.Integrated DIN rail mount.Slim footprint case.Includes SW-504 industrial unmanaged Ethernet switch 4 ports, quick start guide.Complaints and standards: CCC-Mark, C-Tick, Microsoft certified Gold Partner, WEEE, RoHS, METL, AEO (C-TPAT).Warranty: Lifetime limited.Brainboxes Industrial unmanaged Ethernet switch with 4 galvanically isolated ports features 10/100Base-TX network technology for added security.

The Grandstream GWN7813P is a high-performance Layer 3 managed switch designed for medium-to-large enterprise networks. Featuring 24 Gigabit Ethernet ports with PoE++ support and 4 10G SFP+ uplinks, it delivers up to 128Gbps switching capacity for seamless data flow. Smart power control enables dynamic PoE allocation per port, with a total budget of 360W and up to 60W per port. Advanced security features like ARP inspection, IP source guard, and DoS protection safeguard your network, while built-in QoS and ACL filtering optimize traffic prioritization. The GWN7813P supports IPv4/IPv6 routing, stacking, and is managed via Web GUI, CLI, SNMP, or Grandstream’s cloud platforms. Its versatile mounting options and robust design make it ideal for scalable, secure, and intelligent business deployments..24 Gigabit ports and Layer 3 managed switching for enterprise-grade control..Enables dynamic PoE++ allocation with up to 60W per port and 360W total power budget..Up to 128Gbps switching capacity and supports 4 high-speed 10G uplinks..Suitable for desktop, wall, or rack mounting with included installation accessories..Supports SNMP v1/v2c/v3 for remote monitoring and network diagnostics..Prioritizes traffic using advanced QoS with shaping, scheduling, and rate limiting..Secures networks with ARP inspection, IP guard, DoS defense, and port isolation..Operates with VLANs, link aggregation, and dynamic routing protocols like OSPF and BGP..Optimizes energy use with smart power control and efficient fan speed adjustment..Certified by FCC, CE, RCM, IC, and UKCA for global compliance and safety standards.

The Grandstream GWN7832 is a high-performance Layer 3 aggregation switch designed for enterprise-grade deployments. Featuring 12 SFP+ 10G ports, it delivers up to 240Gbps switching capacity and 178.56Mpps forwarding rate, ideal for handling peak network loads. Advanced VLAN segmentation, IGMP/MLD Snooping, and built-in QoS ensure optimized traffic flow and performance. Robust security features—including ARP inspection, IP source guard, and DoS protection—safeguard your infrastructure. With support for IPv4/IPv6, stacking, and dual power redundancy, the GWN7832 offers scalable reliability. Managed via Web GUI, CLI, SNMP, or Grandstream’s cloud platforms, it provides centralized control and simplified maintenance for modern business networks..Aggregates 12 SFP+ ports with Layer 3 managed switching for enterprise networks..Up to 240Gbps switching and 178.56Mpps forwarding rate..Mounts on desktop, wall, or rack with included kits..SNMP v1/v2c/v3 enables remote monitoring and diagnostics..Built-in QoS prioritizes traffic with advanced shaping and scheduling..Secures networks with ACL, 802.1X, MAC auth, and DoS protection..Operates with stacking, link aggregation, and dynamic routing protocols..Reduces power use via efficient PSU and surge protection..Complies with FCC, CE, RCM, IC, and UKCA standards.

The TRENDnet TEG-204WS 20-port Gigabit Ethernet rack mountable web smart switch in black, has fanless design and delivers advanced management features with a 40 Gbps switching capacity. It has 16 x Gigabit ports and 4 x shared Gigabit ports (RJ-45/SFP). This switch features local dial in user authentication, 802.1X Port-Based network access control, RADIUS and TACACS+ security systems. It is suitable for traffic control, troubleshooting, access controls and monitoring..Gigabit Ethernet web smart switch provides faster throughput.Ports: (16) Gigabit ports, (4) shared Gigabit ports (RJ-45/SFP).Management: HTTP/HTTPS (SSL v2/3 TLS) web based GUI, SNMP v1, v2c, v3, RMON v1, static unicast Mac address, security: Local dial in user.Dimensions: 1.7"H x 11"W x 7"D.Power consumption: 14.6 W (maximum).Certifications and standards: Meets CE, FCC and UL standards.Has fanless design.Input voltage: 100 to 240 VAC, 50/60 Hz, internal power supply.Form factor: 1U rack mountable, color: Black.Data transfer rate: 20 Mbps (full duplex) Ethernet, 200 Mbps (full duplex) Fast Ethernet, 2000 Mbps (full duplex) Gigabit Ethernet.RAM buffer: 512KB, Mac address table: 8K entries, jumbo frames: 10KB, forwarding rate: 29.8 Mpps (64 byte packet size).Layer supported: 2, media type supported: Twisted pair, optical fiber, network technology: 10/100/1000Base-T, 1000Base-X.Port mirror: RX, TX or both, one-to-one, protocols: IP protocol 0-255, TCP/UDP port 1-65535.Compatible with optional software utility Windows 10, 8.1, 8, 7, Vista, XP, Windows 2003/2008 server.Includes quick installation guide, CD-ROM (utility and users guide), 6' power cord and rack mount kit.Features IPv6, LACP, VLAN, QoS and IGMP snooping, private and voice VLAN support, metal housing and 802.3ad dynamic LACP.Weight: 3.88 lbs..Comes with 3 year warranty

The HP® 2930F 24G 4SFP manageable layer 3 switch has uplink port, 24 RJ-45 ports, four SFP ports and one serial console for connectivity. It works with PC. It measures 1.72" x 17.42" x 7.88". This rack-mountable switch supports twisted pair as well as optical fiber media, Gigabit Ethernet technology and 1000Base-X as well as 10/100/1000Base-TX network technology. It has AirWave network management, intelligent management center, command-line interface, web browser, configuration menu, SNMP manager, Telnet, RMON1 and FTP management. It comes with one power cord, one screw kit, four mounting ears, four bumper feet and one cable tie..Manageable layer 3 switch offers an affordable solution for businesses of all sizes that requires simple network management.Dimensions: 1.72" x 17.42" x 7.88".Compatible with PC.Color: Black.Interface: Uplink port, modular, 24 x RJ-45, four SFP and one serial (console).Media type supported: Twisted pair, optical fiber, Layer supported: Three, Network technology: 1000Base-X, 10/100/1000Base-TX.Standards: IEEE 802.1ab (LLDP), IEEE 802.1ad, IEEE 802.1AX, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, Jumbo frame size: 9220, Throughput: 41.7 Mpps.Management feature: AirWave network management, IMC - intelligent management center, command-line interface, web browser, configuration menu.MAC address table size: 32K entries, IPv4 routing table entries: 10000, IPv6 routing table entries: 5000.Authentication method: CHAP, PAP, RADIUS, TACACS and TACACS+.Memory and processor: Dual core ARM Coretex A9 at 1016 MHz, 1GB DDR3 SDRAM, Packet buffer size: 12.38MB 4.5MB Ingress/7.875MB Egress, 4GB eMMC.Operating temperature: 32 to 113 deg F, Storage temperature: -40 to 158 deg F, Operating humidity range: 15 - 95% (non-condensing).Form factor: 1U rack-mountable and desktop.Power source: Internal power supply, Nominal voltage: 120 VAC, Power consumption operational: 29.3 W.Contains switch, one power cord, one screw kit, four mounting ears, four bumper feet and one cable tie.Meets REACH, 80 PLUS Silver, CISPR 22 Class A, CISPR 24, CNS 13438, CSA C22.2 No. 60950-1-07, VCCI Class A certifications and standards.Weight: 5.31 lbs..Comes with lifetime limited warranty

Cisco Catalyst 9300 Series switches are Cisco's lead stackable enterprise access switching platform and as part of the Catalyst 9000 family, are build to transform your network to handle a hybrid world where the workplace is anywhere, endpoints could be anything, and applications are hosted all over the place. The Catalyst 9300 Series, including the new Catalyst 9300X models, continues to shape the future with continued innovation that helps you reimagine connections, reinforce security and redefine the experience for your hybrid workforce big and small..Stackable managed Gigabit Ethernet switch.Equipped with 24 x Gigabit Ethernet ports with full PoE+ support and 4 x Gigabit fixed uplinks.Forwarding rate: 41.66Mbps, switching capacity: 56Gbps.Dimensions: 1.73"H x 17.5"W x17.7"D.505W available PoE power with single primary power supply.Based on the Cisco UADP 2.0 Application-Specific Integrated Circuit (ASIC) with programmable pipeline and microengine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.Features x86 CPU complex with 8GB memory, and 16GB of flash and external USB 3.0 SSD pluggable storage slot (delivering up to 240GB of storage with an optional SSD drive) to host containers.USB 2.0 slot to load system images and set configurations.Intelligent Power Management with Cisco StackPower technology, providing power stacking among members for power redundancy.IPv6 support in hardware, providing wire-rate forwarding for IPv6 networks.Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-to-IPv6 migration.Cisco IOS XE, a modern operating system for the enterprise with support for model-driven programmability including NETCONF, RESTCONF, YANG, on-box Python scripting, streaming telemetry, container-based application hosting, and patching for critical bug fixes.Plug-and-Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts, or updates to an existing network.Advanced security: Encrypted Traffic Analytics (ETA), support for AES-256 with the powerful MACsec 256-bit encryption algorithm, hardware anchored Secure Boot and Secure Unique Device Identification (SUDI) support for Plug and Play, to verify the identity of the hardware and software.Perpetual licensing package includes the Network Essentials licensing option that is tied to the hardware.Lifetime manufacturer limited warranty

Elevate your enterprise network with the Grandstream GWN7822P, a high-performance Layer 3 multi-gigabit managed switch designed for medium-to-large businesses. Featuring 24 Gigabit ports—including 8 ultra-fast 2.5G ports—and 4 SFP+ uplinks, it delivers blazing 80Gbps switching capacity for seamless data flow. Smart PoE/PoE+/PoE++ power control supports up to 240W total output, ideal for powering IP phones, cameras, and access points. Advanced security protocols, ACL filtering, and built-in QoS ensure secure, prioritized traffic management. With support for IPv4/IPv6, stacking capabilities, and flexible management via embedded controller, GDMS, CLI, or GWN Manager, the GWN7822P offers unmatched scalability and control..24 Ethernet ports, multi-gigabit speed, and fully managed Layer 3 switching..Powers devices via dynamic PoE/PoE+/PoE++ with up to 240W total output..80Gbps switching capacity for high-speed enterprise networking..Built for rack mounting, ideal for structured and scalable network setups..Enables SNMP v1/v2c/v3 for advanced network monitoring and control..Prioritizes traffic intelligently using built-in Quality of Service (QoS)..Secures access with ACL filtering, 802.1X, MAC auth, and AAA protocols..Supports stacking, link aggregation, and dual boot for resilient operations..Optimizes power use with smart control and optional redundant power supply..Meets FCC, CE, RCM, and IC compliance standards for global deployment.

The Brainboxes SW-505 fast Ethernet rail-mountable unmanaged switch in black is suitable for deployment, both at the core and the network end to provide high Gigabit speeds throughout the network. It includes 5 galvanically isolated network ports, which has switching capacity of 10/100 Mbps. It features security function like broadcast storm protection and supports rapid spanning tree protocol. This Ethernet switch is perfect for factory floor, in vehicle and marine applications..Fast Ethernet managed switch is suitable for deployment, both at the core and the network end.Ports: 5 x Fast Ethernet.Transmission speed: 100 Mbps.Dimensions: 0.8"W x 3.7"D.Power consumption: 1.35 W.Meets WEEE, RoHS, AEO (C-TPAT), CE standards.Layer supported: Layer 2.Ethernet technology: Fast Ethernet.Network technology: 10/100Base-TX.Form factor: Rail-mountable, wall mountable.Weight: 4.06 oz..Comes with lifetime limited warranty

Cisco Catalyst 9300 Series switches are Cisco's lead stackable enterprise access switching platform and as part of the Catalyst 9000 family, are build to transform your network to handle a hybrid world where the workplace is anywhere, endpoints could be anything, and applications are hosted all over the place. The Catalyst 9300 Series, including the new Catalyst 9300X models, continues to shape the future with continued innovation that helps you reimagine connections, reinforce security and redefine the experience for your hybrid workforce big and small..Managed 24-port Gigabit Ethernet switch offers simplicity without compromise: secure, always on, and IT simplified.Equipped with 24 x 10/100/1000 PoE+ ports and four 10 Gigabit/1 Gigabit SFP+.Switching capacity: up to 128Gbps or up to 448Gbps with stacking.Made in rack-mountable form factor.Facilitates remote management with SNMPv1/v2c/v3 management station that discovers and monitors the switch.Quality of service (QoS) and flow control for improved network efficiency.Dimensions: 1.73"H x 17.52"W x 19.21"D

Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations..Managed 24-port Gigabit Ethernet switch offers simplicity without compromise: secure, always on, and IT simplified.Equipped with 24 x Gigabit Ethernet ports with full PoE+ support and 4 x 1/10G fixed uplinks.Switching capacity: up to 128Gbps or up to 208Gbps with stacking.Made in 1U rack mountable form factor.Superior QoS includes granular wireless bandwidth management and fair sharing, 802.1p class of service (CoS) and differentiated services code point (DSCP) field classification, shaped round-robin (SRR) scheduling, committed information rate (CIR), and eight egress queues per port.Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Advanced network monitoring using full Flexible NetFlow.Simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE).Network assurance and improved resolution time through Cisco DNA Center.Plug-and-Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.Cisco IOS XE: a Common licensing based operating system for the enterprise Cisco Catalyst 9000 product family with support for model-driven programmability and streaming telemetry.ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.Perpetual licensing package includes the Network Essentials licensing option that is tied to the hardware.Lifetime manufacturer limited warranty

This switch is a next generation smart managed switch with 20Gbps switching capacity. It provides (8) 10/100/1000Base-T copper ports with IEEE 802.3at PoE+ capability and (2) additional 100/1000 dual speed SFP slots. The embedded Device Management System (DMS) provides the benefits of ease of use in the IP surveillance, wireless Access Point and other applications. The DMS capability built into the switches is new from Transition Networks and provides time-saving features enabling security integrators or network administrators to establish and document a baseline deployment, automatically discover and remotely configure attached IP-powered devices (PDs)..IPv6 Access Management.Support Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.DHCP Relay, DHCP Snooping, DHCP Server.L2/L3/L4 ACLs Support MAC ACL, IP standard/extended ACL.LLDP (Link Layer Discovery Protocol).IEEE 802.3az Energy Efficiency.IP Source Guard, Port Security.Syslog

Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations..Managed 48-port Gigabit Ethernet switch offers simplicity without compromise: secure, always on, and IT simplified.Switching capacity: up to 176Gbps or up to 256Gbps with stacking.Made in 1U rack mountable form factor.Superior QoS includes granular wireless bandwidth management and fair sharing, 802.1p class of service (CoS) and differentiated services code point (DSCP) field classification, shaped round-robin (SRR) scheduling, committed information rate (CIR), and eight egress queues per port.Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Advanced network monitoring using full Flexible NetFlow.Simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE).Network assurance and improved resolution time through Cisco DNA Center.Plug-and-Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.Cisco IOS XE: a Common licensing based operating system for the enterprise Cisco Catalyst 9000 product family with support for model-driven programmability and streaming telemetry.ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.Perpetual licensing package includes the Network Essentials licensing option that is tied to the hardware.Lifetime manufacturer limited warranty

SS2GR4000 Series is a L2 Gigabits intelligent switch designed for carrier and MAN networks. It supports comprehensive QoS, enhanced VLAN functions (VLAN VPN, Voice VLAN, QinQ, N:1 VLAN Translation), Ethernet Ring Protection Protocol (G.8032), classified bandwidth control, intelligent security control, OAM(Operations, Administration and Maintenance), manageability functions and Triple-Play services which fulfill the network requirements demanded by carrier network, MAN access. SS2GR4000 Series switch offers green features like IEEE 802.3az (Energy Efficient Ethernet), Fan-less design, which can dramatically lower power consumption, achieve green energy and save the cost for the carrier and MAN users..Features 48 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network

The Grandstream GWN7831 is a high-performance Layer 3 aggregation switch built for scalable enterprise networks. It features 4 combo Gigabit Ethernet ports, 24 Gigabit SFP ports, and 4 SFP+ uplinks, delivering up to 240Gbps switching capacity. Designed for IPv4/IPv6 environments, it supports dynamic routing protocols, VLAN segmentation, and multicast optimization. Advanced QoS and ACL filtering ensure prioritized traffic flow, while robust security features like ARP inspection, IP source guard, and DoS protection safeguard network integrity. Managed via Web GUI, CLI, SNMP, or Grandstream’s cloud platforms, the GWN7831 is ideal for medium-to-large deployments requiring intelligent, secure, and high-capacity switching..4 combo Ethernet ports and 24 SFP ports for Layer 3 managed aggregation..240Gbps switching capacity with 4 SFP+ uplinks for peak performance..Mounts on desktop, wall, or rack with included installation hardware..Wired-only design ensures stable connectivity without wireless interference..Enables SNMP v1/v2c/v3 for remote monitoring and diagnostics..Prioritizes traffic using advanced QoS with shaping, mapping, and scheduling..Protects networks with ARP inspection, IP guard, DoS defense, and port security..Operates with VLANs, link aggregation, and dynamic routing protocols like OSPF and BGP..Smart power control and supports external redundant PSU for energy efficiency..Certified by FCC, CE, RCM, IC, and UKCA for global compliance and safety standards.

Cisco Catalyst 9300 switches are stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. Cisco Catalyst 9300 switches form the foundational building block for Software-Defined Access (SD-Access). They are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. TCisco Catalyst 9300 is the first optimized platform for high-density Wi-Fi 6 and 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch..Stackable enterprise switching platform built for security, IoT, mobility, and cloud.Features 48-port 1G copper with fixed 4x10G SFP+ uplinks, PoE+ Network Advantage.Uses Encrypted Traffic Analytics (ETA), AES-256 MACsec encryption, IPSec encryption, Trust Anchor Technologies, and Umbrella DNS Integration.Dimensions: 1.73"H x 17.5"W x 17.7"D.Maximum power consumption: 715W; switching capacity: 176Gbps.Certifications and standards: Meets or exceeds UL 60950-1, CAN/CSA-C222.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950.1, IEEE 802.3 standards.Accelerate changes with programmability, supporting open standards and APIs.Detect and stop threats, even with encrypted traffic.Simplified automation and assurance: goal-based policies are created once centrally, applied network-wide.Features x86 CPU complex with 8GB memory, and 16GB of flash and external USB 3.0 SSD pluggable storage slot (delivering up to 240GB of storage with an optional SSD drive) to host containers.High wireless scale for Wi-Fi 6 and 802.11ac Wave 2 access points supported on a single switch with select models.Lifetime manufacturer limited warranty

The D-Link eight-port 10/100/1000 gigabit/fast Ethernet switch plugs into your network and gives you the power to connect a range of devices from IP cameras and phones to printers and wireless access points. The switch is built with eight different ports, so you can expand your network with multiple wired connections. With its fast Ethernet technology, the switch enables high performance without sacrificing speed or throughput..8 Ports - 4 x POE - 4 x RJ-45.10/100/1000Base-T - PoE Ports.Interfaces/ports: 4 x Network (RJ-45), 4 x PoE (RJ-45), 8 x gigabit Ethernet network.192KB buffer.Data transfer rate: 2000 Mbps (full-duplex).Filtering address table: 4K MAC entries/device.Power: 100 - 240 VAC, power consumption: 63.2 W(max).Dimensions: 1.5"(H) x 7.5"(W) x 4.7"(D).Media type supported: Cat 5 twisted-pair.Switching capacity: 16 Gbps.LED indicators:/port: Link/Activity/Speed/PoE Status,/device: power/PoE Max.Network technology: 10/100/1000Base-T Gigabit Ethernet.Layer supported: 2, Form factor: Desktop.Jumbo frame support: 9720.Features auto-negotiation, auto-uplink, cable diagnostics function, d-link green technology, flow control, packet filtering, quality of service (qos), store and forward.Certification & standards: FCC Class B, ICES-003 Class B, CE Class B, C-Tick Class B, VCCI Class B, cUL, LVD.Warranty: Lifetime limited.1 1/2"(H) x 7 1/2"(W) x 4.7"(D).Limited lifetime warranty.D-Link Eight-Port 10/100/1000 Gigabit/Fast Ethernet Switch - Robust Networking

The Grandstream GWN7813 is a high-performance Layer 3 managed network switch designed for medium-to-large enterprises seeking scalable, secure, and intelligent networking. Equipped with 24 Gigabit Ethernet ports and 4 10G SFP+ uplink ports, it delivers a total switching capacity of 128Gbps and non-blocking throughput of 64Gbps. Advanced features include dynamic routing (RIP, OSPF, BGP), 4K VLAN support, IGMP/MLD snooping, and comprehensive QoS for traffic prioritization. Security is reinforced with ARP inspection, IP source guard, DoS protection, port isolation, and MAC authentication. The GWN7813 supports stacking of up to 4 devices and integrates seamlessly with Grandstream’s GDMS Networking and GWN Manager platforms for centralized cloud or on-premise management. With PoE++ support on ports 1–8, it powers IP phones, cameras, and access points efficiently. Designed for desktop, wall, or rack mounting, and backed by enterprise-grade reliability, the GWN7813 is ideal for building robust business networks..Features 24 Gigabit ports and 4 10G SFP+ uplinks in a managed Layer 3 switch.Powers PoE/PoE++ devices with smart dynamic allocation on ports 1–8.Delivers 128Gbps switching capacity and 64Gbps non-blocking throughput.Mounts easily on desktop, wall, or rack with included hardware.Supports SNMP v1, v2c, and v3 for remote monitoring and diagnostics.Prioritizes traffic using advanced QoS with multiple queue scheduling modes.Secures networks with 802.1X, MAC auth, DoS protection, and DHCP snooping.Enables dynamic routing with RIP, OSPF, BGP, and policy-based controls.Reduces power use with energy-efficient Ethernet and fan/power monitoring.Complies with FCC, CE, RCM, IC, and UKCA certifications for global deployment

The Grandstream GWN7806P is a Layer 2+ managed switch engineered for small-to-medium business networks. It features 48 Gigabit Ethernet RJ45 ports with PoE/PoE+ support and 6 SFP+ uplinks, delivering up to 216Gbps switching capacity. Each port supports up to 30W, with a total PoE budget of 400W, managed via smart power control. The switch includes advanced reliability features like fault detection, dual boot, and link aggregation, along with robust security protocols such as ARP inspection, IP source guard, and DoS protection. With built-in QoS, stacking support for up to 16 switches, and management via GWN.Cloud or GWN Manager, the GWN7806P offers scalable, secure, and intelligent switching for modern enterprise networks..48 Gigabit RJ45 ports and Layer 2+ managed switching for enterprise networks..PoE/PoE+ with smart power control and 30W per port, totaling 400W..216Gbps switching capacity with 6 SFP+ uplinks for high-speed backbone..Mounts on desktop or rack with included installation accessories..Enables SNMP v1/v2c/v3 for remote diagnostics and network monitoring..Prioritizes traffic using advanced QoS with shaping, mapping, and scheduling..Secures networks with ARP inspection, IP guard, DoS protection, and port isolation..Operates with VLANs, link aggregation, and stacking support for up to 16 switches..Uses internal PSU with surge protection and efficient power allocation..Certified by FCC, CE, RCM, IC, and UKCA for global compliance and safety standards.

The HP Aruba 2930M R0M67A switch is designed for customers creating smart digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. These Layer 3 network switches are easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager and Aruba AirWave and cloud-based Aruba Central. A powerful Aruba ProVision ASIC delivers performance, robust feature Support, and value with flexible programmability for the latest applications. High performance modular stacking for up to 10 switches provides pay as you grow scalability and simplicity. The flexible 2930M Supports wire speed 106bE and 4OGbE uplinks, redundant dual modular power supplies for up to 1440 Watts of PoE, and new models with industry standard lEEE 802.3bt Class 6 that provide up to 60W of PoE per port..Switch is designed for customers creating smart digital workplaces that are optimized for mobile users with an integrated wired and wireless approach.Dimensions: 1.73"H x 17.42"W x 12.77"D.Comes in black.Features 10 chassis backplane stacking Static, RIP and access, OSPF routing, Dynamic Segmentation, ACLs, SDN, and robust QoS.Features advanced security and network management via Aruba ClearPass Policy Manager, Aruba AirWave, and Aruba Central.Features modular 10GbE or 40GbE uplinks and HPE Smart Rate (IEEE 802.3bz) with up to 1440W PoE.Up to 60W PoE per port (IEEE 802.3bt Class 6) for high power devices.Software is defined ready with REST APIs and OpenFlow support.Features simple deployment with Zero Touch Provisioning

Introducing the NETGEAR MS510TXUP Multi-Gigabit/10G Ethernet Ultra60 PoE++ Smart Switch with 2 SFP+ Ports and 295W PoE budget for WiFi 6 Access Point connectivity and power..Four 1G/2.5G Ethernet ports and Four Multi-Gig/10G Ethernet ports.8 PoE++ ports with 295W total power budget.2 x 10G SFP+ ports.Management software with easy-to-use GUI interface offers secure setup, access, and SNMP (NMS 300) management. Includes NETGEAR Insight to remotely manage your networks from anywhere..Supports desktop or rackmount placement, and includes all the necessary mounting hardware in the box.Reduces fan noise to protect your home office or business environment..Covered by ProSAFE, an industry-best Lifetime Limited Hardware Warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert.Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode..Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance..Dimensions in Inches: 13L x 8.12W x 1.7H; Weight in Pounds: 5.5.Insight Cloud Management, Desktop/Rackmount, ProSAFE Lifetime Protection

This switch is a next generation smart managed switch with 52Gbps switching capacity. It provides (24) 10/100/1000Base-T copper ports with IEEE 802.3at PoE+ capability and (2) additional 100/1000 dual speed SFP slots. The embedded Device Management System (DMS) provides the benefits of ease of use in the IP surveillance, wireless Access Point and other applications. The DMS capability built into the switches is new from Transition Networks and provides time-saving features enabling security integrators or network administrators to establish and document a baseline deployment, automatically discover and remotely configure attached IP-powered devices (PDs)..IPv6 Access Management.Support Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.DHCP Relay, DHCP Snooping, DHCP Server.L2/L3/L4 ACLs Support MAC ACL, IP standard/extended ACL.LLDP (Link Layer Discovery Protocol).IEEE 802.3az Energy Efficiency.IP Source Guard, Port Security.Syslog

Extreme Networks ExtremeSwitching 5320 (24P-8XE) expands bandwidth and improves usability for business networks. Twenty-four access ports support PCs, printers, and IoT devices, while Layer 2 switching maintains secure, consistent operations. 10-Gigabit uplinks optimize performance to the core, and support for cost-efficient twisted pair cabling enables high-speed links up to 100 meters. Designed for straightforward deployment and scalable growth..Create your own LAN and connect your PC, laptop, printer and other peripherals with the help of 24 ports.With leading Layer 2 support, experience enhanced convenience, secure business operations, and a borderless network experience.Optimize the performance of business networks with 10 Gigabit Ethernet connectivity.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters

HP® 5400R ZL2 Management module is an ideal choice to offer improved open flow performance. Module enhances PoE+ capability to all ports simultaneously and offers a faster backplane..Dimensions: 1.4"(H) x 8.13"(W) x 10.3"(D).Includes: HP 5400R zl2 management module (J9827A).Weight: 1.05 lbs..Warranty: Lifetime limited.HP® 5400R ZL2 Management module enables you to monitor and manage power environments through comprehensive control of UPSs.