Hot melt fiberglass cross-weaved reinforced pressure sensitive adhesive tape. Typical applications would include: carton closure, L- clip closures, strapping, bundling, unitizing, packaging, palletizing, etc.
This filament tape is a fiberglass cross-weaved reinforced pressure sensitive tape that has been designed for applications where a high resistance to tensile stress is required. The biaxially oriented polypropylene backing provides excellent abrasion, moisture, splitting and scuffing resistance. It is solvent and thinner resistant, provides instant adhesion, possesses excellent quick stick properties to a wide variety of surfaces.
- Hot melt fiberglass cross-weaved reinforced pressure sensitive adhesive tape. Typical applications would include: carton closure, L- clip closures, strapping, bundling, unitizing, packaging, palletizing, etc.
- 1" x 60 yds
- Clear tape
- Hot melt adhesive with 4 mil thickness
- 151 lbs./in.
- Backing thickness is 1.1 MIL
- Total thickness is 5.1 MIL
- Adhesion to steel is 89 oz/in
- Elongation at break is 10%
- Service temperature ranges from -10 degrees F to 150 degrees F
- Industrial grade
- The high strength backing protects the filaments and adhesive-increases life and tape performance
- Good handling characteristics saves time due to ease of dispensing and application
- High resistance to abrasion (resists splitting and scuffing)
- Resistant to moisture, solvents, and thinners
- Good holding power and initial adhesion: holds instantly and sticks to a variety of surfaces
![Vibac Fiberglass Cross-weaved Reinforced Filament Tape, 24 MM X 55M, Clear (920-0019)~#|#~s1083950_sc7]()
![Vibac Fiberglass Cross-weaved Reinforced Filament Tape, 24 MM X 55M, Clear (920-0019)~#|#~s1083949_sc7]()
Vibac Fiberglass Cross-weaved Reinforced Filament Tape, 24 MM X 55M, Clear (920-0019) is Out of stock