1000 Mbps Switches

This switch is a next generation smart managed switch with 20Gbps switching capacity. It provides (8) 10/100/1000Base-T copper ports with IEEE 802.3at PoE+ capability and (2) additional 100/1000 dual speed SFP slots. The embedded Device Management System (DMS) provides the benefits of ease of use in the IP surveillance, wireless Access Point and other applications. The DMS capability built into the switches is new from Transition Networks and provides time-saving features enabling security integrators or network administrators to establish and document a baseline deployment, automatically discover and remotely configure attached IP-powered devices (PDs)..IPv6 Access Management.Support Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.DHCP Relay, DHCP Snooping, DHCP Server.L2/L3/L4 ACLs Support MAC ACL, IP standard/extended ACL.LLDP (Link Layer Discovery Protocol).IEEE 802.3az Energy Efficiency.IP Source Guard, Port Security.Syslog

The Transition Networks® SISPM1040-384-LRT-C gigabit Ethernet managed switch is suitable for powering and connecting devices in hardened environments. This switch with 8 POE ports and 4 SFP ports, supports jumbo frames up to 9.6K bytes and supports G.8031 Ethernet linear protection switching. This black switch simultaneously supplies power to all the 8-ports, up to 30 W for each port. The hardened switch is perfect for factory floors, outdoor enclosures or other challenging environments. It includes embedded Device Management System (DMS) software, which provides advanced tools required for management of all IP addressable devices..Gigabit Ethernet managed switch is suitable for connecting and powering devices in hardened environments.8 x 10/100/1000Base-T PoE+, 4 x 100/1000Base-X SFP ports, RJ-45 serial console.Management: VLAN, Private VLAN Edge, Voice VLAN, GVRP, Web, SNMP v1,v2c,v3, Telnet, CLI, DMS, security: HTTPS/SSH v1/v2, IP source guard.Backplane: 24 Gbps.Dimensions: 5.4"H x 2.4"W x 5.3"D.Power consumption: 11 W (Max) without PoE.Meets EMI, CE, FCC Part 15, EN61000-4-2, EN61000-4-3, EN-61000-4-4, EN61000-4-6, IEC60068-2-32, EN50155, EN50121-4, NEMA TS-2, IEEE1613 standards.Power supply: 24 VDC, 1 A digital output, 48 to 57 VDC input.VLANs: 4000.Protocols: Supports LLDP, TCP/UDP source, DSCP/IP precedence.Indicators: Status LEDs - system, power 1, ring master, coupling, power 2, alarm, port status.Mac address: 8K, jumbo frames: 9.6KB.Layer supported: 2, color: Black.Temperature rating: -40 to 75 deg C operating, -40 to 85 deg C (storage), humidity: 5 to 95% (non-condensing).Weight: 2.2 lbs..Comes with 5 year warranty.Black 8-port gigabit Ethernet managed switch supports Jumbo frames up to 9.6 KB, LLDP protocol, port mirroring and port based network access control.

This switch is a next generation smart managed switch with 52Gbps switching capacity. It provides (24) 10/100/1000Base-T copper ports with IEEE 802.3at PoE+ capability and (2) additional 100/1000 dual speed SFP slots. The embedded Device Management System (DMS) provides the benefits of ease of use in the IP surveillance, wireless Access Point and other applications. The DMS capability built into the switches is new from Transition Networks and provides time-saving features enabling security integrators or network administrators to establish and document a baseline deployment, automatically discover and remotely configure attached IP-powered devices (PDs)..IPv6 Access Management.Support Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.DHCP Relay, DHCP Snooping, DHCP Server.L2/L3/L4 ACLs Support MAC ACL, IP standard/extended ACL.LLDP (Link Layer Discovery Protocol).IEEE 802.3az Energy Efficiency.IP Source Guard, Port Security.Syslog

Pure compatibility, pure stability, pure design. The perfect fit for any stable, future-proof system, even where space is limited..This unmanaged Gigabit Ethernet switch features five ports, supports speeds of 10/100/1000 Mbps, and operates without the need for configuration..Data transfer rate of 10/100/1000 Mbps, supporting Gigabit Ethernet speeds.It has a mega compact form factor, measuring just 55 x 55 x 16 mm (2.17 x 2.17 x 0.63 inches), which is smaller than a standard business card..Designed for straightforward plug-and-play operation without the need for configuration.With a throughput of 10/100/1000 Mbps, this device supports Gigabit Ethernet speeds and operates in a non-blocking layer 2 mode, ensuring efficient data transfer without packet loss..Maximum power consumption of 3.3W.Industrial operating temp (-40 °C to +85 °C / -40°F to +176°F).Seamless integration with design software - logical placements and fixed distances.Board to board and board to cable connection.LEDs visible in all orientations – can be directed to outer casing via fiber optics or light pipe, or electrically wired.Comes with a 10 year limited warranty

The SISPM1040-582-LRT is a full managed PoE++ switch suitable for connecting and powering devices in hardened environment. It has (8) 10/100/1000 PoE++ ports with (2) 100/1000 dual speed SFP slots. The switch can supply up to 90 Watts per port on four ports or 60 Watts per port on eight ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments..IPv4/IPv6 dual protocols.Supports Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

This switch is a next generation rack mount hardened switch with 136Gbps switching capacity. It provides (24) 10/100/1000 PoE+ ports, (4) 100/1000 dual speeds SFP ports, It has additional (4) 1G/10G SFP+ slots..IPv4/IPv6 dual protocols.Supports Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

748305aacfb94d13fcf70f731a800a0a.Features 24 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Gigabit Ethernet port for ultra-fast network speeds.Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree.Management capability provides control over setup and configuration of your network.Built-in power supply to ensure all components are being supplied with accurate voltage.Rack mounting enables you to organize wires & secure cables for professional installation

D-Link® WebSmart Managed gigabit ethernet switch features gigabit Ethernet technology and 10/100/1000base-T network technology respectively. Switch has storm control which protects against broadcast, multicast and unknown unicast storm..28-ports 10/100/1000Base-T gigabit Ethernet, fast Ethernet.Address database size: 16000 MAC addresses.Managed switch.Total Number of network ports: 24, Number of network (RJ-45) ports: 24.Media type supported: Twisted-pair, Ethernet technology: Gigabit Ethernet, fast Ethernet, Network technology: 10/100/1000Base-T.Number of total expansion slots: 4, Number of SFP slots: 4.Standard memory: 128MB, memory technology: DDR2 SDRAM, flash memory: 16MB.Performance: Switching capacity: 56 Gbps, forwarding performance: 41.7 Mpps.Jumbo frame support: 10000, MTBF: 236739 hrs.Remote management protocol: SNMP 1, SNMP 2, Telnet, SNMP 3, SNMP 2c, HTTP, CLI.Interfaces: 24 x 1000Base-T - RJ-45, 4 x SFP (mini-GBIC).Eco-friendly operation with D-Link green technology, web based management and auto discovery utility, true plug and play.Fanless design for quiet operation, fiber media support via 4 dedicated SFPs, DSCP and QoS with auto voice VLANs for VoIP, advanced security features, IPv4/IPv6 dual-stack.Displays MAC address, IP address, DHCP hostname, insight plus will report client security, time when device was last seen transmitting data on the network.Input voltage: 110 VAC, 220 VAC, Power source: Power supply.Operating temperature: 32 - 122 deg F, Operating humidity: 0 - 95%.Certifications and standards: IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x.Warranty: Lifetime limited.D-Link® WebSmart Managed gigabit ethernet switch with a standard memory of 128 MB requires an input voltage of 110/220 VAC and has 24 network ports.

This eco-friendly WebSmart switch conforms with the Allied Telesis commitment to environmentally friendly processes and products. It is designed to minimize power consumption through the use of a high efficiency power supply..Network management type: Smart switch.Ports: 24 ports.Port configuration: 24 x RJ-45 10/100/1000Base-T.Buffer memory: 512 KB.Address database size: 8000 MAC addresses.Lifetime limited warranty.Management: Web based management, Port based VLAN, 802.1p QoS, port trunking.Static multicast group.Spanning tree, 802.1d/w.Power: 120 - 230 VAC, 50 / 60 Hz.Number of SFP slots: 4.Number of total expansion slots: 4.Media type supported: Twisted pair.Includes: AT-GS950/24 24 port gigabit websmart Switch, wall and 19" rack mount brackets, U.S. power cord.Compliant standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.1x.Allied Telesyn™ AT-GS950/24 Ethernet Switch features 24 ports, twisted pair, and gigabit ethernet.

SS2GR4000 Series is a L2 Gigabits intelligent switch designed for carrier and MAN networks. It supports comprehensive QoS, enhanced VLAN functions (VLAN VPN, Voice VLAN, QinQ, N:1 VLAN Translation), Ethernet Ring Protection Protocol (G.8032), classified bandwidth control, intelligent security control, OAM(Operations, Administration and Maintenance), manageability functions and Triple-Play services which fulfill the network requirements demanded by carrier network, MAN access. SS2GR4000 Series switch offers green features like IEEE 802.3az (Energy Efficient Ethernet), Fan-less design, which can dramatically lower power consumption, achieve green energy and save the cost for the carrier and MAN users..Features 48 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network

Five-port gigabit switch accelerates your performance and productivity when you send large files to network servers, drives and printers. Wired connection speed up to 1,000 Mbps minimizes transfer times and interference while streaming high-bandwidth files. Plug-and-play technology instantly extends your office network with a quick, easy installation. Auto-sensing ports automatically optimize the speed for each connected device. The auto power-down feature disables unused ports to maximize its efficiency..Address database size: 8000 MAC addresses.Total number of network ports: 5, number of network (RJ-45) ports: 5, port/expansion slot details: 5 x Gigabit ethernet network.Media type supported: Twisted-pair, Ethernet technology: Gigabit Ethernet, network technology: 10/100/1000Base-T.Performance: Bandwidth: 10 Gb/s, full line rate and forwarding rate of 64B frame at: 1.488 Mpps for 1000M port, 0.1488 Mpps for 100M port, 0.01488 Mpps for 10M port.Status LEDs: Link and activity indicators.Form factor: Desktop.Layer supported: 2.AC power: 100 - 240 VAC, 50/60 Hz, 12 VDC or 5 VDC, power consumption in iddle/use (100% traffic): 0.73 W/2.22 W.Operating temperature: 0 - 40 deg C, operating humidity: 10 - 90% RH.Certifications and standards: IEEE 802.3/3ab/3u/3x.Warranty: Lifetime limited

The Tenda TEG1016M is a high-performance, 16-port Gigabit Ethernet switch designed for small and medium-sized businesses as well as home networking environments. Featuring 16 auto-negotiation 10/100/1000 Mbps RJ45 ports, the switch ensures seamless and high-speed data transfer, making it ideal for applications requiring stable and reliable connectivity, such as file sharing, video streaming, and network expansion. With a switching capacity of 32 Gbps and a forwarding rate of 23.8 Mpps, the TEG1016M delivers robust performance to support demanding network setups. Its One-Key VLAN mode allows easy segmentation of ports for improved network security and performance, isolating ports 1-14 while maintaining communication with ports 15 and 16. This feature is particularly useful for surveillance systems or environments requiring secure data traffic management. Built with durability in mind, the TEG1016M features a mini steel shell and a fanless design for silent operation and efficient heat dissipation. Its compact size and wall-mountable design provide flexibility for installation in various setups. The device is also equipped with 6kV lightning protection for all ports, ensuring stable operation in environments prone to electrical surges. Plug-and-play functionality eliminates the need for configuration, making it user-friendly for professionals and non-technical users alike. The switch is CE, FCC, and RoHS certified, guaranteeing compliance with global safety and environmental standards..The Tenda TEG1016M features 16 Gigabit Ethernet ports, supports unmanaged network management, and delivers high-performance connectivity suitable for small to medium-sized networks..Supports a maximum data transfer rate of 1000 Mbps per port, ensuring fast and reliable network performance for bandwidth-intensive applications..The switch comes in a compact desktop form factor, with an option for wall mounting to accommodate flexible installation setups..Simple Network Management Protocol (SNMP) is not supported, as this is an unmanaged switch designed for straightforward, plug-and-play operation..The TEG1016M includes basic Quality of Service (QoS) features for efficient traffic prioritization, ensuring a stable network experience for essential tasks..Provides a One-Key VLAN feature, isolating ports 1-14 while enabling communication with ports 15 and 16, enhancing security and preventing broadcast storms..Offers a 32 Gbps switching capacity and supports both full-duplex and half-duplex operational modes for versatile performance..The device has a maximum power consumption of <12W and features an energy-efficient design, ensuring lower operating costs and eco-friendly performance..Certified for CE, FCC, and RoHS, meeting global safety, environmental, and electromagnetic compliance standards.

The SISPM1040-362-LRT is a full managed PoE+ switch suitable for connecting and powering devices in hardened environments. The switch can supply up to 30 Watts per port on all four PoE ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments..Store-and-Forward Architecture with 16 Gbps Switching Bandwidth.Supports Jumbo frames up to 9.6K Bytes.Ring Protections: Industry standard G.8032 Ethernet Ring Protection Switching (ERPS), Support G.8031 Ethernet Linear Protection Switching (EPS), Rapid Ring with recovery time less than 20ms.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

SS2GR4000 Series is a L2 Gigabits intelligent switch designed for carrier and MAN networks. It supports comprehensive QoS, enhanced VLAN functions (VLAN VPN, Voice VLAN, QinQ, N:1 VLAN Translation), Ethernet Ring Protection Protocol (G.8032), classified bandwidth control, intelligent security control, OAM(Operations, Administration and Maintenance), manageability functions and Triple-Play services which fulfill the network requirements demanded by carrier network, MAN access. SS2GR4000 Series switch offers green features like IEEE 802.3az (Energy Efficient Ethernet), Fan-less design, which can dramatically lower power consumption, achieve green energy and save the cost for the carrier and MAN users..Features 24 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network

The Tenda TEG1005D is a 5-port Gigabit Ethernet switch designed to provide high-speed network connectivity for home and small office environments. This unmanaged switch supports up to 5 gigabit ports, each capable of delivering speeds up to 1000 Mbps, ensuring fast and stable connections for your devices. It is perfect for expanding your network with additional wired connections and is ideal for use with computers, printers, IP cameras, gaming consoles, and other Ethernet-enabled devices. The TEG1005D operates efficiently with its plug-and-play functionality, requiring no configuration, making it user-friendly for those who need quick, hassle-free setup. The switch is also energy-efficient, consuming less than 2.5W of power, which helps reduce operating costs. It features auto-sensing technology for automatic adjustment of port speeds and duplex settings to ensure the best possible performance for each connected device. With support for Jumbo Frame sizes up to 15KB, the TEG1005D provides efficient handling of large data packets, making it suitable for demanding tasks such as video streaming or large file transfers. This switch is built to operate in a range of environments, with an operating temperature range from 0°C to 40°C and the flexibility to be mounted on a desktop or wall..The Tenda TEG1005D features 5 Gigabit Ethernet ports, offering Gigabit Ethernet performance. It is an unmanaged switch, designed for plug-and-play simplicity with no configuration required..Provides a data transfer rate of up to 1000 Mbps (1 Gbps) per port, ensuring fast and efficient network communication..Has a desktop form factor and is also wall-mountable, providing flexibility for installation in various environments..The Tenda TEG1005D supports Gigabit Ethernet throughput with full-duplex operation on each port, ensuring maximum network performance and efficiency..Designed to be energy-efficient, consuming less than 2.5W of power, helping reduce operating costs and utilizing energy-saving technology..Complies with IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab standards for Ethernet connectivity, ensuring reliable performance and compatibility across various devices and network setups.

Built for Security, IoT, Mobility, and Cloud: The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: Simplified device deployment. Unified management of wired and wireless networks. Network virtualization and segmentation. Group-based policies. Context-based analytics..Features 24 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Built for Security, IoT, Mobility, and Cloud: The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: Simplified device deployment. Unified management of wired and wireless networks. Network virtualization and segmentation. Group-based policies. Context-based analytics..Features 48 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

D-Link DGS-1100 series is a range of switches designed to meet the requirements of small, medium, and enterprise businesses. Support for multiple PoE standards make the DGS-1100 series perfect for IP surveillance deployments. Advanced management features, a range of diagnostic and troubleshooting tools, and energy efficient technologies provide a flexible solution to meet your networking requirements..Desktop switch offers highly flexible solution for the needs of a diverse range of businesses with support for PoE, advanced management, troubleshooting tools, and energy-efficient technology.Contains eight 10/100/1000Mbps ports (PoE).Supports an intuitive client-based utility (D-Link Network Assistant) and a web-based management interface.IGMP snooping is able to reduce the load of L3 multicast routers and save bandwidth in network throughput.Dimensions: 1.1"H x 6.7"W x 3.9"D.Maximum power consumption: 77.9W (PoE on), 4.6W (PoE off).Certifications and standards: Meets or exceeds FCC Class B, CE Class B, VCCI Class B, BSMI, cUL, CE LVD, CB standards.Fanless design for a longer product life and silent operation.Bandwidth Control ensures latency-sensitive traffic always gets the bandwidth it needs.Quality of Service further prioritizes latency-sensitive traffic, ensuring timely delivery.Segregate different types of traffic, such as surveillance or voice, with VLANs to heighten security.PD Alive feature automatically reboots malfunctioning connected PoE devices to mitigate downtime.Innovative energy-saving features are good for your budget, as well as the environment.Equipped with advanced security features, such as static MAC, storm control, and IGMP snooping.Features Loopback Detection and Cable Diagnostics to help network administrators find and solve network problems quickly and easily.Provides Power over Ethernet (PoE) support, reducing deployment time for IP cameras, VoIP phones, and access points.Can be powered by a PoE switch or injector, allowing for more flexible installation in remote areas with no available power outlets.Comes in black

Built for Security, IoT, Mobility, and Cloud: The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: Simplified device deployment. Unified management of wired and wireless networks. Network virtualization and segmentation. Group-based policies. Context-based analytics..Features 24 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

10/100/1000MBps.Connect computers and other devices so data can be shared at the highest speeds.Compatible with virtually any major network operating system.Accelerate your desktop network with Gigabit connectivity for up to 8 devices.All ports have auto speed negotiation and auto MDI/MDI-X crossover detection

TRENDnet's Industrial Gigabit L2+ Managed DIN-Rail Switch series offers advanced layer 2 managed features with enhanced traffic controls to meet the evolving demands of today's SMB networks. Each industrial layer 2 managed switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° - 75° C (-40° - 167° F) for industrial environments. Our industrial layer 2 managed switch models feature copper Gigabit ports for high-speed device connections, and SFP slots that support 1000Base-FX modules for long distance fiber networking applications. These industrial layer 2 managed DIN-Rail switches provide an intuitive web-based management interface. Each TRENDnet industrial layer 2 managed switch supports advanced traffic management controls, troubleshooting, and SNMP monitoring. Advanced managed switch features include LACP to group ports together to increase bandwidth between switches, VLANs for segmenting and isolating virtual LAN groups, QoS for traffic prioritization, port bandwidth controls, and SNMP monitoring making each TRENDnet industrial layer 2 managed switch a powerful solution for SMB networks. This industrial 802.3bt PoE++ switch has four gigabit PoE++ ports with a 360W PoE power budget, plus two SFP slots for long distance fiber applications. Advanced PoE technology supported includes Perpetual PoE, Fast PoE, and PoE Alive Check..This switch includes 4 Gigabit Ethernet ports and 2 Gigabit SFP slots, offering a 12Gbps switching capacity. It is a Layer 3 managed switch, ideal for industrial and SMB network environments requiring advanced traffic control and reliability.Supports IEEE 802.3bt PoE++ with a 360W total PoE power budget, delivering up to 90W per port. Features include Perpetual PoE, Fast PoE, PoE scheduling, and PD alive check to automatically reboot unresponsive devices.Each port supports Gigabit Ethernet (10/100/1000 Mbps), ensuring high-speed data transmission across all connected devices.Designed for DIN-Rail mounting, the switch features a rugged IP30-rated metal enclosure suitable for harsh industrial environments with high vibration, shock, and extreme temperatures ranging from -40°C to 75°C.This is a wired-only switch and does not support wireless connectivity, focusing on robust, high-speed wired networking.Supports SNMP v1, v2c, and v3, enabling remote monitoring and management of network performance and device health.Includes IEEE 802.1p QoS with queue scheduling (SPQ/WRR) and DSCP support, allowing prioritization of critical traffic for smoother network performance.Offers a comprehensive management suite including Web GUI, CLI (Telnet/SSH), VLAN (802.1Q/Q-in-Q), IGMP Snooping, MLD, MVR, and MAC address filtering.Also supports Ethernet Ring Protection Switching (ERPSv2) for redundancy and alarm output for power failure alerts.Delivers non-blocking throughput with store-and-forward switching, and supports link aggregation (LACP), STP/RSTP, and bandwidth control per port for optimized traffic handling.Operates with dual redundant power inputs, includes overload current protection, and supports energy-efficient PoE scheduling to reduce power usage during off-hours

The GS108Tv3 eight-port Gigabit Ethernet Smart Managed Pro switch provides a great value, with flexible and cost-effective solution for SMB data, voice, and video converged network. Advanced features such as Layer 3 static routing, IPv6 management, ACL, DiffServ QoS, LACP link aggregation and spanning tree will satisfy even the most advanced small business networks. Remote/cloud management capability with NETGEAR Insight. By activating the NETGEAR Insight cloud management, the users will enable fundamental management features allowing businesses to have simpler configuration and deployment from anywhere using the NETGEAR Insight app from mobile devices or the Insight Cloud Portal from any device with a web browser..Smart Gigabit Ethernet switch with cloud management provides LAN access for eight users.Eight 10/100/1000BASE-T RJ45 ports.Easy to manage via web-based management GUI or Smart Control Center.Bandwidth: 16Gbps.Dimensions: 1.1"H x 6.2"W x 4"D.5.5W maximum power consumption (with all ports used, line-rate traffic); 1.9W minimum power consumption (link-down standby); features IEEE 802.3az for maximum power savings.Fanless design allows for silent operation, great for deployment in noise-sensitive environments.Features VESA holes for desktop and wall-mounting.Flexible and cost-effective solution for SMB data, voice, and video converged network.Features one PD port to receive power from another PoE switch or injector.Layer 3 static routing with 32 routes (IPv4) for inter-VLAN local routing.Advanced VLAN support for better network segmentation.IGMP Snooping and Querier for multicast optimization.Rate limiting and priority queuing for better bandwidth allocation.Auto DoS prevention.RMON and SNMP v1, v2c, v3 remote monitoring.L2/L3/L4 access control lists for granular network access control including 802.1x port authentication.Advanced QoS for traffic prioritization including port-based, 802.1p, and L2/L3/L4 DSCP-based.Remote/cloud management capability with NETGEAR Insight app.Lifetime manufacturer limited warranty; 2-year manufacturer limited warranty on power adapter

Built for Security, IoT, Mobility, and Cloud The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: ? Simplified device deployment ? Unified management of wired and wireless networks ? Network virtualization and segmentation ? Group-based policies ? Context-based analytics.Features 48 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

This switch is an unmanaged full Gigabit Ethernet hardened PoE+ switch that complies with IEEE 802.3at and IEEE 802.3af. The switch has (8) 10/100/1000Base-T PoE+ ports with two 100/1000 dual speed SFP slots. It can deliver up to 30 Watts on each PoE+ port simultaneously. The SISTP1040-382-LRT can be used at the edge of a hardened network to provide connections for PoE devices in hazardous locations. The two fiber uplink ports can also be used in a daisy chain for maximum network reliability. It has redundant input power connections to ensure safe reliable operation in temperatures between -40°C and +75°C. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other hazardous environments..Support Jumbo Frame up to 9K bytes.Layer 2 wire-speed switching engine.Ruggedized metal closure.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

The Zyxel GS1200-8HP managed 8-port Gigabit PoE+ desktop Ethernet switch in gray color, features switching capacity of 16 Gbps, MAC address of 4K and memory buffer of 192KB. It has a input voltage of 55 V, input current of 1.3 A and it consumes maximum power of 72 W..Managed Gigabit Ethernet switch.Has eight 10/100/1000 PoE+ ports.System management: VLAN, QoS, SNMP v1, 2, 3, RMON (1, 2, 3, 9), Syslog, MIB, web based management.Switching capacity: 10 Gbps.Dimensions: 1"H x 9.5"W x 4.1"D.Power consumption: 2.67 W (max), 60 W Power-over-Ethernet (PoE).Certifications and standards: RoHS Compliant.MAC address: 4K entries.Jumbo frames: 9KB.Buffer memory: 192KB.Color: Gray.Form factor: Desktop.Routing protocol: IGMP, IGMPv2, IGMPv3.Layer supported: 2.Power supply: 55 V, 1.3 A.Temperature: 32 to 104 deg F operating, -40 to 158 deg F storage.Humidity: 10 to 90% (non-condensing) operating and 10 to 90% (non-condensing) storage.Weight: 1.29 lbs..⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.8-port managed Ethernet switch features true web management, QoS and support for 802.3af and 802.3at PoE+ plus a user-friendly set-up interface.

Allied Telesis™ Managed WebSmart gigabit ethernet switch features 10/100/1000Base-T network technology. Switch has web-based management protocol and supports 2 layer communication..Ethernet technology: Gigabit Ethernet, Network technology: 10/100/1000Base-T, Media type supported: Twisted pair.Interfaces/ports: 16 x RJ-45.Dimensions: 1.7"(H) x 13.9"(W) x 8.5"(D).Form factor: Wall-mountable, rack-mountable.Management protocols: Web-based management, port-based VLAN, 802.1p QoS, port trunking/link aggregation, port mirroring, priority queue's, spanning tree, statistics & diagnostics.Layer supported: 2.Expansion slots: 2, Expansion slot details: 16 x Gigabit Ethernet network, 2 x Fast Ethernet expansion slot.Temperature: 32 - 104 deg F, Humidity: 5 - 90%, Voltage: 110 - 220 VAC input.Includes: AT-GS950/16 16 port Gigabit webSmart switch, wall & 19" rack-mount brackets, U.S. power cord.Certifications: IEEE 802.3x, UL 1950, FCC/EN55022 Class A, VCCI-Class A, C-Tick, EN60950 (TUV), EN55024, CE.Weight: 5.25 lbs..Warranty: Lifetime limited.Allied Telesis™ Managed WebSmart gigabit ethernet switch has 16 interface ports and is rack-mountable.

D-Link® 10-port Managed gigabit ethernet switch features 10 gigabit Ethernet technology and 10/100/1000base-T network technology respectively. Switch has 8000 MAC addresses database..PoE switch.Dimensions: 1.73"H x 11.02"W x 7.08"D.Compatible with PC.Comes in black/silver color.Interfaces: 8 x 10/100/1000BASE-T PoE, 2 x SFP.Media type supported: Twisted pair, optical fiber, twisted pair cable standard: Category 5e, Ethernet technology: Gigabit Ethernet.Layer supported: 3, PoE standard: IEEE 802.3af & IEEE 802.3at, PoE capable ports: Ports 1 to 8: Up to 30W.Form factor: Rack mountable, desktop, network cables: UTP Cat.5, Cat.5e (100m max), EIA/TIA-568 100-ohm STP, transmission method: Store-and-forward.Manageable, management: VLAN, QoS, MIB, Syslog, diagnostic LEDs: Power (per device), PoE Max (per device), link/activity/speed.Switching capacity: 40 Gbps, MAC address table: 16, 000 entries per device, packet forwarding rate: 14.88 Mpps, packet buffer memory: 1.5MB.IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX (Fast Ethernet), IEEE 802.3ab 1000BASE-T (Gigabit Ethernet), auto-negotiation.Security: Broadcast multicast/unicast storm control, D-Link safeguard engine, DHCP server screening.IP-MAC-Port binding (smart binding) - Supports 512 address binding entries, ARP inspection, ARP + IP inspection, supports DHCP Snooping.Power source: Power supply, input voltage: 120 - 230 VAC, PoE power budget: Max. 78 W.Operating temperature: 23 - 122 deg F, storage temperature: -4 to 158 deg F, humidity: 0 - 95 % non-condensing (operating/storage).Meets FCC Class A, CE Class A, ICES-003, VCCI Class A, C-Tick, BSMI, Safety, cUL, CE LVD, ENERGY STAR, WEEE standards.Weight: 3.1 lbs..D-Link® 10-port Managed gigabit ethernet switch is compatible with 1U rack unit and requires input voltage of 110/220 VAC.

The Allied Telesis GS910 Series offers unmanaged Gigabit switching solutions for the desktop, and small networks. The series has internal and external power supply versions, and also features network loop guard technology, which automatically detects any unexpected network loops, and prevents network devices from broadcast packet storms. OverviewWith minimal to no set-up, GS910 Series switches provide simple and seamless connectivity to existing network infrastructure. High performanceThe GS910 Series delivers the high speed and high performance demanded by today's high-bandwidth applications, such as video, graphics and industrial design. Quality and reliabilityAllied Telesis is a world-wide leader in unmanaged Ethernet switches. Shipping more than 250,000 unmanaged switches every year, Allied Telesis offers proven reliability, and industry-recognized quality. Loop detectionGS910 Series switches provide network loop detection by using Loop Detection Frame (LDF). LDF detects network loops, and shuts down ports where the loop is detected. After the loop is solved, the port that has shut down is automatically recovered. Environmentally-friendly eco-switchAllied Telesis GS910 Series eco-friendly switches conform with the Allied Telesis commitment to environmentally-friendly processes and products. They are designed to minimize power consumption through the use of a high-efficiency power supply and a low-power chipset. With low power consumption and a reduction in power outside regular work hours (overnight mode), as well as other power-saving features included as standard, the Allied Telesis GS910 Series truly lives up to its eco-friendly reputation. Not only does this help the planet by reducing the carbon footprint of each switch, it also lowers the Total Cost of Ownership (TCO) to the user, as the device costs less to run, and features improved reliability..Quickly and easily set up a wired network with 5 networking ports.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Up to 10x faster than standard Ethernet server connectivity while providing high-performance uplinks.With leading Layer 2 support, experience enhanced convenience, secure business operations, and a borderless network experience.The unmanaged switch provides a quick, easy and cost-saving way to add wired networking to your home, office or small business; no intervention needed.Built-in power supply to ensure all components are being supplied with accurate voltage.The desktop installation makes it ideal for deployments outside the wiring closet

The Tenda SG105M is a 5-port Gigabit Ethernet switch designed for home and small office use. It offers a reliable and fast networking solution with auto-negotiation for 10/100/1000 Mbps speeds, providing seamless data transmission across your devices. The switch is unmanaged, making it simple to install and use without the need for complex configuration. With a compact form factor, the SG105M can be placed on a desk or mounted on a wall, offering versatility in placement. This switch is ideal for connecting PCs, smart TVs, game consoles, printers, and other Ethernet-enabled devices, enabling fast and stable wired connections. It supports plug-and-play functionality and ensures automatic connection speed adjustments based on the connected device. The SG105M is designed for low power consumption and comes equipped with essential features like auto MDI/MDIX, ensuring ease of use and compatibility with various network setups. The SG105M is a cost-effective solution for users seeking to expand their home or office network while maintaining high performance and efficiency..The Tenda SG105M features 5 Gigabit Ethernet ports, with Gigabit Ethernet performance class, and operates as an unmanaged switch, providing a simple plug-and-play solution without requiring network configuration..The switch supports data transfer rates of up to 1000 Mbps (Gigabit Ethernet), ensuring fast and stable network performance..The SG105M comes in a compact desktop form factor, suitable for home or small office environments..The Tenda SG105M does not support Simple Network Management Protocol (SNMP), as it is an unmanaged switch..The Tenda SG105M does not feature Quality of Service (QoS) capabilities, as it is designed to provide basic switching functionality without advanced traffic prioritization..The SG105M is an unmanaged switch with no advanced system management or security features, designed for simple network setups..The SG105M offers high throughput with a 10/100/1000 Mbps auto-negotiation feature, ensuring compatibility with a wide range of devices and network speeds..The SG105M is designed for low power consumption, incorporating energy-saving features that automatically power down unused ports to reduce energy usage..The Tenda SG105M complies with IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab standards, ensuring broad compatibility and reliable performance with various network devices.

CyberData 3-Port gigabit Ethernet switch is fully compatible with IEEE 802.3u standard and features 10/100/1000 full duplex with RoHS Compliant. Switch has 1.4 Gbps high performance memory bandwidth and consumes less power..3-port auto-negotiating (no crossover cablerequired).USB or PS/2 mouse-powered(no external power supply required).VLAN Packet Forwarding.USB A to B cable included.Each port has auto MDX - any port can beused as the uplink connection.All ports are 10/100/1000 Mbps auto sensingbased upon the port's individual connection.Interfaces/ports: 3 x RJ45, 1 x USB-B.Dimensions: 1.1"(H) x 3.78"(W) x 2.75"(L).Compatibility: PC.Media type supported: Twisted pair, Ethernet technology: Gigabit Ethernet, network technology: 10/100/1000Base-T.Power: 350 mA at 5V (supplied by a USB or PS/2 port).LEDs: Link, status and connection speed.Operating temperature: -10 - 50 deg C.Form factor: Wall mountable.Input voltage: 5 VDC, power source: USB.Certifications and standards: IEEE 802.3u, RoHS.Includes: 3 port Gigabit Ethernet switch, USB A to B cable.Weight: 0.2 lbs..Warranty: 2 years limited.CyberData 3-Port gigabit Ethernet switch is powered through a PC's USB or PS/2 mouse and has LEDs that shows the link, status as well as connection speed.

18% off  of Netgear Plus 5-Port Gigabit Ethernet Managed Switch, 10/100/1000 Mbps (GS305EPP-100NAS)

Netgear Plus switches with PoE meets business networks growing need by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. These models support Power-Over-Ethernet (PoE) and can power devices such as VOIP phones, surveillance IP cameras, wireless access points and many other applications. These new PoE+ Gigabit Ethernet Plus switches models include uninterruptable PoE to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..Desktop managed switch with PoE meets business networks' growing need by providing fundamental network features that will help optimize the performance of business networks.Contains five 10/100/1000 RJ45 copper ports (auto uplink).Enable network configuration and management at the price point of unmanaged switches.Dimensions: 1.1"H x 6.2"W x 4"D.Certifications and standards: Meets or exceeds CE mark, commercial FCC Part 15 class B, CE/EN55032/24, VCCI, ACMA, CSA safety, KC, BSMI standards.Simple, yet useful network set-up on top of plug-and-play connectivity.Business-friendly and easy-to-use web browser-based management GUI.VLAN support for traffic segmentation.Quality of Service (QoS) for traffic prioritization.Auto “denial-of-service” (DoS) prevention.Troubleshoot connection issues via cable test.Features port mirroring for network monitoring, jumbo frame support, per port PoE controls, uninterrupted PoE keeps PoE power on even when the switch is updating firmware or performing software reboot, 802.3at standard offering 30W/port.5-year manufacturer limited warranty

Introducing the NETGEAR MS510TXUP Multi-Gigabit/10G Ethernet Ultra60 PoE++ Smart Switch with 2 SFP+ Ports and 295W PoE budget for WiFi 6 Access Point connectivity and power..Four 1G/2.5G Ethernet ports and Four Multi-Gig/10G Ethernet ports.8 PoE++ ports with 295W total power budget.2 x 10G SFP+ ports.Management software with easy-to-use GUI interface offers secure setup, access, and SNMP (NMS 300) management. Includes NETGEAR Insight to remotely manage your networks from anywhere..Supports desktop or rackmount placement, and includes all the necessary mounting hardware in the box.Reduces fan noise to protect your home office or business environment..Covered by ProSAFE, an industry-best Lifetime Limited Hardware Warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert.Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode..Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance..Dimensions in Inches: 13L x 8.12W x 1.7H; Weight in Pounds: 5.5.Insight Cloud Management, Desktop/Rackmount, ProSAFE Lifetime Protection

Zyxel 24 Port smart managed switch supports green Ethernet IEEE 802.3az with high-power PoE IEEE 802.3at standard. Switch has fanless design and contains 2 extra SFP slots to provide 100 M and GbE speeds for long-distance deployments..Number of Ethernet Ports 24, Performance Class & Network Management Type 2 Layer Supported.PoE: Not Applicable.Switching Bandwidth 52 Gb/s.Switch Form Factor: Desktop, Rack-mountable.Wireless Connectivity: Not Applicable.QoS for Traffic Prioritization.System Management: Managed Network Switch with SFP.Power Consumption: 16.00 W (Active)

Brainboxes Industrial compact 5-port Gigabit Ethernet unmanaged switch is perfect factory floor, in vehicle and marine applications. Automatic detection of data transmission speed: 10/100/1000 Mbps. Dual input redundant power supply with wide voltage range means it can be powered from USB or on the 24V factory floor. Power terminal is removable with numbered pins for easy wiring. Power consumption is optimized based on the status of the link device. No software required..This unmanaged compact Ethernet switch is perfect for factory floor, in-vehicle, and marine applications.Contains 5 x RJ45 jacks, 10/100/1000Mbs autosensing (auto-MDIX) Ethernet ports.No software required: simply plug in any ethernet cable.Dimensions: 3.9"H x 3.7"W x 1.1"D.Power consumption: 3.6W.Certifications and standards: Meets or exceeds the Microsoft Certified Gold Partner, WEEE, RoHS, AEO (C-TPAT), CE standards.Tough metal case with all-round small profile.Easy wire-removable screw terminal block.All Ethernet ports are auto-MDI/MDIX supporting straight through or crossover Ethernet cables.Integral DIN mount with ground.Lifetime manufacturer limited warranty

Accelerate your performance and productivity when you send large files to network servers, drives, and printers at Gigabit speeds..16-ports 10/100/1000Base-T gigabit Ethernet.Address database size: 8000 entries.Unmanaged switch.Interface/ports: 16 x RJ-45.Layer supported: 2.Form factor: Desktop, wall mountable.Dimensions: 1"(H) x 11"(W) x 4.7"(D).Input voltage: 12 VDC.Power consumption: 9.32 W.Media type supported: Twisted pair.Temperature: 0 - 50 deg C, Humidity: 10 - 90 % non-condensing.Easy plug and play connection.Wired connection speed up-to 1000 Mbps.Includes LGS116 16-port gigabit Ethernet switch, power adapter, quick start guide.Certifications and standards: FCC class A, CE, 802.3/U/x/ab/az.Weight: 1.71 lbs..Warranty: Lifetime limited

Easily deploy or scale your network with this Gigabit Ethernet switch, by adding eight copper Gigabit Ethernet (GbE) connections, including four PoE+ ports. This IP30 industrial network switch provides intelligent Layer 2 management. Its rugged, compact design and wall-mount option with front access make it ideal for demanding applications, even where space is limited. Expand your network This Gigabit Ethernet switch lets you expand your network by connecting up to eight RJ45 devices (four PoE+). The 8-port switch enables up to eight users to share files and devices, such as printers and scanners, over a LAN connection, by enhancing your existing network capacity with additional ports. Supports PoE+ for flexible use The switch gives you the freedom to place your equipment in locations where power outlets are not available, with support for Power over Ethernet Plus. The network switch provides abundant PoE power, with up to 30 watts for each PoE port (120W budget). Wall-mountable with front access With its compact design, you can wall-mount the Gigabit switch to provide convenient front access to ports and indicators. It's ideal for a wide range of applications, including tight installation areas with significant electromagnetic interference, such as control cabinets and panels. The network switch is also DIN-rail mountable. Efficient Layer 2 management The switch delivers efficient and stable performance, with Layer 2 management capabilities. This lets you control packet traffic on a busy network, and customize your settings to achieve optimal network performance, offering improved efficiency and reliability. Rugged industrial design This rugged network switch features an IP30-rated metal housing and extended operating temperature range of -40°C to 75°C, which makes it ideal for a wide range of conditions. The sturdy metal enclosure offers durability, even in harsh industrial environments. Reliable connection for seamless network performance With support for 10/100/1000Mbps transfer speeds, this managed switch supports full/half-duplex auto-negotiation, jumbo frames, and auto MDI/MDIX operation. This lets you connect your network devices quickly and easily, with little to no configuration required. To help prevent any unnecessary downtime, the switch features redundant 12-58V DC terminal block power inputs, which ensures seamless operation in the event of power dips or failures. The IES81GPOEW is backed by a StarTech.com 2-year warranty and free lifetime technical support..Expand your network with 8x RJ45 (4 PoE+) ports in one Gigabit network switch.PoE power up to 30W per PoE+ port (120W budget).Rugged IP30 industrial design with metal housing and extended temperature range (-40 degreesto +75 degreesC)

Industrial 5 Port Gigabit PoE Switch - 30W - Power Over Ethernet Switch - Hardened GbE PoE+ Unmanaged Switch - Rugged High Power Gigabit Network Switch IP-30/-40 C to 75 C (IESC1G50UP).FLEXIBLE POWER INPUT: Power over Ethernet network switch can be hardwired using terminal block (48-56VDC) power or powered using a standard (48-56VDC) Type-N barrel wall adapter (not included).POWER OVER ETHERNET: Gigabit PoE Switch provides up to 30W of PSE power per PoE port to IEEE 802.3af (PoE) & IEEE 802.3at (PoE+) | Use with devices like cameras & access points using Cat 5e/6.ROBUST DESIGN: Industrial Network Switch w/MTBF 500,000+hrs @ 50C | Vibration, shock & free fall rated | Rugged industrial IP-30 aluminum housing | -40C to 75C hardened operating temp | DIN/Wall Mount.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years | This Gigabit PoE switch is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support.TECH SPECS: 5 Port GbE Switch | 4 PoE ports | IEEE 802.3af / IEEE 802.3at | 10/100/1000 Mbps | Unmanaged | Redundant Power Input | Terminal Block Power | Total power budget: 120W.Rugged PoE Switch | 30 Watts | IP-30 Aluminum Housing | Unmanaged | 5 Port

Brainboxes Industrial compact 5-port Gigabit Ethernet unmanaged switch is perfect factory floor, in vehicle and marine applications. Automatic detection of data transmission speed: 10/100/1000 Mbps. Dual input redundant power supply with wide voltage range means it can be powered from USB or on the 24V factory floor. Power terminal is removable with numbered pins for easy wiring. Power consumption is optimized based on the status of the link device. No software required..This unmanaged compact Ethernet switch is perfect for factory floor, in-vehicle, and marine applications.Contains 5 x RJ45 jacks, 10/100/1000Mbs autosensing (auto-MDIX) Ethernet ports.No software required: simply plug in any ethernet cable.Dimensions: 3.9"H x 3.7"W x 0.9"D.Power consumption: 3.6W.Certifications and standards: Meets or exceeds the Microsoft Certified Gold Partner, WEEE, RoHS, AEO (C-TPAT), CE standards.Nonconducting polyamide case with all-round small profile.Easy wire-removable screw terminal block.All Ethernet ports are auto-MDI/MDIX supporting straight through or crossover Ethernet cables.Integral DIN mount with ground.Lifetime manufacturer limited warranty

All 5 ports support Auto-MDI/MDIX, eliminating the need to worry about what type of cable to use. Featuring full duplex mode, the device can process data at a rate of up to 2000Mbps, making it an ideal choice for expanding your high performance wired network. Moreover, with innovative energy-efficient technology, the TL-SG105 can save energy up to 65%..Support IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode.Support QoS (IEEE 802.1p).Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput.10Gbps Switching Capacity, 2K MAC address table, 9KB Jumbo Frame, 1MB Buffer Memory.Auto-MDI/MDIX eliminates the need for crossover cables.Support MAC address auto-learning and auto-aging.Auto-negotiation ports allow smart integration between 10Mbps, 100Mbps, and 1000Mbps devices.Fanless design to keep a quiet environment.Support 100-240V power supply.TP-LINK’s TL-SG105 provides an easy way to expand your wired network.

44% off  of Netgear 300 Series 8-Port Gigabit Ethernet Unmanaged Switch, 10/100/1000 Mbps, Black (GS308PP-100NAS)

The Netgear 300 Series Gigabit Ethernet unmanaged switch with PoE provides easy, reliable, and affordable network connectivity for home and small offices. With this unmanaged plug-and-play switch, you can expand your network connections to multiple devices instantly. The SOHO gigabit PoE unmanaged switch supports Netgear's FlexPoE exclusive upgradeable PoE feature. Powered by the flexible integrated PoE+ technology, you can increase or decrease the PoE budget by simply purchasing a new Netgear FlexPoE power supply, effectively future-proofing small business networks and budgets. This unmanaged switch contains eight PoE+ ports with 83W total power budget, and includes Netgear FlexPoE, making it expandable to 123W (with separately purchased power supply module)..Unmanaged switch with eight ports provides gigabit Ethernet connectivity to your devices.Provides a total power budget of 83W (up to 30W per port) to power wireless access points, IP cameras, IP phones, and much more; upgradable to 123W PoE+ budget with an additional power supply module.Install your switch on your desktop, or mount it to the wall (wall mount kit included).Quality of Service (QoS) for traffic prioritization.Non-blocking switching architecture for maximum throughput at wire speed.Energy-efficient technology for power savings.Meets or exceed the CE Mark, FCC Part 15 Class A, IC Class B, RCM, VCCI, CB, and CE LVD standards.Auto MDI/MDIX eliminates the need for crossover cables.LED indicators for ease of use.Fanless design for silent operation.Auto negotiation for automatic connection at the highest common speed between the switch and end device.Plug-and-play, no setup required.Durable and rugged metal case for long-lasting use.Great for small office and home networks.Dimensions: 1.1"H x 6.2"W x 4"D.Standards-based technology ensures interoperability with any standards-based devices in the existing network.Box contains: unmanaged PoE Gigabit Ethernet switch, power adapter/cord (localized to the North America region), rubber foot pads for desktop installation, wall mount kit, installation guide.3-year manufacturer limited warranty

Get the blazing speed of Gigabit Ethernet with the D-Link DGS-1024D, a 24-port 10/100/1000Mbps Switch that delivers power, performance, and reliability in one cost-effective, space-saving design. Increase the speed of your network server and backbone connections, or make Gigabit to the desktop a reality. Power users in the office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network instantly. The versatile and compact 1RU height design of the DGS-1024D enables the device to be rack mounted in a standard 19 inch rack, while conserving valuable rack space..48Gbps.24-Port Gigabit Switch, Rackmount/Desktop.IEEE 802.3 Ethernet.10BASE-T, 100BASE-TX & 1000BASE-T.10/100/1000MBps.Operating temperature: 32° to 104°F (0° to 40°C).Increases the speed of your network server and backbone connections.Media Type Supported Twisted Pair.PoE: Not Applicable.19.1 W power consumption.48 GBPS switching fabric.High-performance wire-speed and non-blocking architecture.Diagnostic LEDs: Per unit - power, per port - activity/link, speed.Store-and-forward transmission method.Up to 9600 bytes jumbo frames.RoHS compliant.3.64 lbs.1 3/4"(H) x 11.1"(W) x 7.1"(D).Limited lifetime warranty.5-year limited warranty (US and Canada).D-Link DGS-1024D 24-Port 10/100/1000 Gigabit Ethernet Switch is high-performance wire-speed and non-blocking architecture gigabit ethernet switch.

The unmanaged switch offers gigabit speeds to minimize transfer times and greatly enhance the ability to stream high-bandwidth files to connected devices without interference. PoE support lets you deploy network systems such as wireless access, IP telephony, or video surveillance solutions more quickly and at a lower cost, without having to install separate power supplies for individual devices..8-ports 10/100/1000Base-T gigabit Ethernet.Address database size: 8000 entries.Unmanaged switch.Interface/ports: 4 x PoE (RJ-45), 4 x PoE+ (RJ-45).Layer supported: 2.Form factor: Desktop, wall mountable.Dimensions: 1"(H) x 8.3"(W) x 4.1"(D).Input voltage: 54 VDC.Power consumption: 7 W.Media type supported: Twisted pair.Temperature: 0 - 50 deg C, Humidity: 10 - 90 % non-condensing.Easy plug and play connection.Wired connection speed up-to 1000 Mbps.Includes 8-port desktop gigabit PoE switch, power adapter, quick start guide.Certifications and standards: FCC class A, CE, 802.3/U/x/ab/az/af/at.Weight: 1.23 lbs..Warranty: Lifetime limited

Netgear Plus switches with PoE meets business networks growing need by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. These models support Power-Over-Ethernet (PoE) and can power devices such as VOIP phones, surveillance IP cameras, wireless access points and many other applications. These new PoE+ Gigabit Ethernet Plus switches models include uninterruptable PoE to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..Desktop managed switch with PoE meets business networks' growing need by providing fundamental network features that will help optimize the performance of business networks.Contains five 10/100/1000 RJ45 copper ports (auto uplink).Enable network configuration and management at the price point of unmanaged switches.Dimensions: 1.1"H x 6.2"W x 4"D.Certifications and standards: Meets or exceeds CE mark, commercial FCC Part 15 class B, CE/EN55032/24, VCCI, ACMA, CSA safety, KC, BSMI standards.Simple, yet useful network set-up on top of plug-and-play connectivity.Business-friendly and easy-to-use web browser-based management GUI.VLAN support for traffic segmentation.Quality of Service (QoS) for traffic prioritization.Auto “denial-of-service” (DoS) prevention.Troubleshoot connection issues via cable test.Features port mirroring for network monitoring, jumbo frame support, per port PoE controls, uninterrupted PoE keeps PoE power on even when the switch is updating firmware or performing software reboot, 802.3at standard offering 30W/port.5-year manufacturer limited warranty

Brainboxes Industrial 5-port gigabit unmanaged Ethernet switch is perfect for embedded applications. Galvanically isolated Ethernet ports capable of 10/100/1000 Mbps. Dual input redundant power supply with wide voltage range means it can be powered from USB or on the 24V factory floor. Power terminal is removable with numbered pins for easy wiring. Power consumption is optimized based on the status of the link device. No software required..This unmanaged Ethernet switch is perfect for embedded applications.Contains 5 x RJ45 jacks, 10/100/1000Mbs autosensing (auto-MDIX) Ethernet ports.No software required.Dimensions: 3.7"H x 3.5"W x 0.8"D.Power consumption: 3.6W.Certifications and standards: Meets or exceeds the Microsoft Certified Gold Partner, WEEE, RoHS, AEO (C-TPAT), CE standards.Ready for embedded applications.Easy wire-removable screw terminal block.Ethernet interface takes advantage of the company's pre-existing infrastructure, allowing you to connect to your Brainboxes device over the local network or from across the world.Lifetime manufacturer limited warranty

Upgrade the data paths of your local wired network to information superhighways with 16-port desktop Gigabit PoE switches..Address database size: 8000 MAC addresses.Total number of network ports: 16, number of PoE (RJ-45) ports: 8, number of PoE+ (RJ-45) ports: 8, port/expansion slot details: 16 x Gigabit ethernet network.Media type supported: Twisted-pair, Ethernet technology: Gigabit Ethernet, network technology: 10/100/1000Base-T.Performance: Bandwidth: 32 Gb/s.Status LEDs: Link, speed, activity, and PoE indicators.Form factor: Wall mountable, desktop.Layer supported: 2.Full line rate and forwarding rate of 64B frame at: 1.488 Mpps for 1000M port, 0.1488 Mpps for 100M port, 0.01488 Mpps for 10M port.Power: 54 VDC, 1.66 A, power consumption in idle/use (100% traffic): 4.52 W/11.31 W.Operating temperature: 0 - 50 deg C, operating humidity: 10 - 90% RH.Includes 16 port desktop Gigabit PoE switch, power adapter, quick start guide.Certifications and standards: IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3az, 802.3af, and 802.3at (PoE+), FCC Class A, CE.Warranty: Lifetime limited

Netgear 300 Plus switches with PoE meets business networks growing need by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. These models support Power-Over-Ethernet (PoE) and can power devices such as VOIP phones, surveillance IP cameras, wireless access points and many other applications. These new PoE+ Gigabit Ethernet Plus switches models include uninterruptable PoE to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..Managed switch delivers essential business networking features and powers PoE+ devices such as VoIP phones, IP cameras, and more.Contains 16 x 10/100/1000 RJ45 copper ports (auto uplink).Business-friendly and easy-to-use web browser-based management GUI.Dimensions: 1.06"H x 11.26"W x 4.02"D.Certifications and standards: Meets or exceeds CE mark, FCC Part 15 class B, CE/EN55032/24, VCCI, ACMA, CSA safety, KC, BSMI standards.Fanless design for silent operation makes this switch perfect for noise-sensitive environments.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.16 ports provide up to 1000Mbps of dedicated, non-blocking bandwidth each.10Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.15 PoE+ ports provide a total of 180W of power so you can power and connect your devices with a single wire.Manage PoE prioritization, PoE power limit per port, PoE scheduling, and more for simple control over all PoE-powered devices.Simple, yet useful network set-up on top of plug-and-play connectivity.Quality of Service (QoS) for traffic prioritization.Port mirroring for network monitoring.Rate limiting for better bandwidth allocation.Features auto "denial-of-service" (DoS) prevention, troubleshoot connection issues via cable test, loop prevention, loop detection, broadcast storm controls.5-year manufacturer limited warranty

TRENDnet® 8-Port green net switch features green net technology which adjusts the power voltage as needed. Gigabit green net switch boost your office efficiency and eliminate network congestion..8 ports 10/100/1000base-T gigabit ethernet.Address database size: 8000 MAC addresses.Management: Unmanaged switch.Power: Input: 100 - 240 V, 50/60 Hz, 190 mA, output: 5 VDC, 1 A external power adapter, consumption: 3.5 W (max.).Form factor: Desktop.Dimensions: 1"(H) x 5.8"(W) x 3.8"(D).Media type supported: Twisted pair, twisted pair cable standard: category 6.Layer supported: 2.Switch fabric: 16 Gbps forwarding capacity.Data RAM buffer: 256 Kbytes, jumbo frame support: 9216 bytes.Protocol / topology: CSMA/CD, Star.Network media: Ethernet: Cat. 5 up to 100 m, fast Ethernet: Cat. 5 up to 100 m, Gigabit Ethernet: Cat. 5, 5e,6 up to 100 m.Data rate: Ethernet: 10Mbps/20Mbps (half/full-duplex), Fast Ethernet: 100Mbps/200Mbps (half/full-duplex), Gigabit Ethernet: 2000Mbps (full-duplex).Store and forward switching architecture with non-blocking wire-speed performance.Temperature: Operating: 0 - 40 deg C, storage: -10 - 70 deg C, humidity: max 90% (non-condensing).Includes multi-language quick installation guide, power adapter (5 VDC, 1 A).Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000base-T, IEEE 802.3x flow control, IEEE 802.3az energy efficient Ethernet, certifications: FCC, CE.Weight: 13.4 oz..Warranty: 3 years limited.Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000base-T, IEEE 802.3x flow control, IEEE 802.3az energy efficient Ethernet, certifications: FCC, CE.Warranty: 3 years limited.TRENDnet® 8-Port green net switch reduces power consumption by up to 70 percent and provides high bandwidth performance.

Netgear 300 Plus switches with PoE meets business networks growing need by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. These models support Power-Over-Ethernet (PoE) and can power devices such as VOIP phones, surveillance IP cameras, wireless access points and many other applications. These new PoE+ Gigabit Ethernet Plus switches models include uninterruptable PoE to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..Managed switch delivers essential business networking features and powers PoE+ devices such as VoIP phones, IP cameras, and more.Contains 16 x 10/100/1000 RJ45 copper ports (auto uplink).Business-friendly and easy-to-use web browser-based management GUI.Dimensions: 1.06"H x 11.26"W x 4.02"D.Certifications and standards: Meets or exceeds CE mark, FCC Part 15 class B, CE/EN55032/24, VCCI, ACMA, CSA safety, KC, BSMI standards.Fanless design for silent operation makes this switch perfect for noise-sensitive environments.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.16 ports provide up to 1000Mbps of dedicated, non-blocking bandwidth each.10Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.15 PoE+ ports provide a total of 231W of power so you can power and connect your devices with a single wire.Manage PoE prioritization, PoE power limit per port, PoE scheduling, and more for simple control over all PoE-powered devices.Simple, yet useful network set-up on top of plug-and-play connectivity.Quality of Service (QoS) for traffic prioritization.Port mirroring for network monitoring.Rate limiting for better bandwidth allocation.Features auto "denial-of-service" (DoS) prevention, troubleshoot connection issues via cable test, loop prevention, loop detection, broadcast storm controls.5-year manufacturer limited warranty