Cisco Connectors
23 results
The Cisco multi-mode rugged SFP module adapts your switch or router, enabling you to connect long-range cables. As a result, you can extend the range of your network and expand connectivity. The SFP module is made with an intuitive design that is easy to install and use, so you can expand your network quickly and with minimum hassle..Interfaces/ports: 1 x LC duplex 100Base-FX.Dimensions: 0.33"(H) x 0.52"(W) x 2.22"(D).Compatibility: Cisco 100 m Ethernet SFP Compatibility matrix.Connectivity technology: Wired.Optical wave length: 1310 nm.Temperature: 122 deg F max operating.Compliant standards: IEEE 802.3, IEEE 802.3ah.Connectivity media: Multi mode fiber 100Base-FX.Max transfer distance: 1.2 miles.Data transfer rate: 100 Mbps fast ethernet.Form factor: Hot-swappable.90 days limited warranty.Cisco Multi-Mode Rugged SFP Module - Hot-Swap Capability
Cisco 100BASE-FX small form-factor pluggable (SFP) fast Ethernet interface converter is a hot-swappable device that plugs into a gigabit Ethernet SFP port on Cisco catalyst 3750 series, 3560 series, and 2970 series switches..Interfaces/ports: 1 x LC duplex 100Base-FX.Dimensions: 0.4"(H) x 2.2"(W) x 1/2"(D).Compatibility: Cisco catalyst 3750, 3560, and 2970 series switches.Connectivity media: 62.5/125 um multi mode fiber, 50/125 um multi mode fiber.Transmit (dBm): 50/125-micron: -23.5 min, -14max, 62.5/125-micron: -20 min, -14max, receive (dBm): 50/125-micron: -33.35 min, -11.8 max, 62.5/125-micron: -33.35 min, -11.8 max.Distance supported: 6.5'.Operating temperature: 32 - 158 deg F, storage temperature: -40 - 185 deg F.Surge current: 350 typical, wavelength (nm): 1270 min, 1300 typical, 1380 max.Power consumption: 1.5 W per port.Input voltage: 3.3 V - 3.5 V device, 3.3 V typical device.Input current: 405 mA typical, 450 mA maximum.Data transfer rate: 100 Mbps fast Ethernet full duplex.MTBF: 12,820,512 hours.Form factor: Hot-swappable.System requirements: Cisco IOS software release 12.2(20)SE1.Application/usage: Data networking.Regulatory and standards compliance: IEC 60825-1.SFP fast ethernet interface converter 100FX SFP on GE SFP ports for DSBU switches.
Cisco® Active twinax 7m cable assembly having a 10G ethernet protocol has 2 x SFP+ ports consists of 24AWG copper conductor. Features Cisco® 10GBASE SFP+ modules and has 10G form factor and supports digital optical monitoring capability..Length: 22.97'.30 AWG.1000 Base.Cisco® Active twinax 7m cable assemblies provide 10 Gigabit Ethernet options for data centres, enterprise wiring closets and service provider transport applications.
Cisco QSFP to QSFP copper direct-attach cable are suitable for very short links and offer a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of Cisco switches within racks and across adjacent racks. Made of copper materials and comes in brown with 3m length..QSFP to QSFP cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 3m.Direct attach assemblies with QSFP-100G connectors.Made of copper and comes in orange.Maximum data transfer rate: 100 Gbps
Cisco QSFP to QSFP copper direct-attach cable are suitable for very short links and offer a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of Cisco switches within racks and across adjacent racks. Made of copper materials and comes in brown with 5m length..QSFP to QSFP cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 5m.Direct attach assemblies with QSFP-100G connectors.Made of copper and comes in orange.Maximum data transfer rate: 100 Gbps
Cisco™ 1000BASE-EX SFP Transceiver module is hot-swappable and supports a 1310 nm wavelength signaling. Module operates on standard SMF optic link that spans up to a distance of 40 km..Interface/ports details: 1 x 1000Base-EX network.Media and performance: G.652 micrometer single mode optical fiber.Ethernet technology: 1 Gbps gigabit ethernet.Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D).Application/usage: Data networking.Form factor: Hot swappable.Wavelength: 1310-nm, Reach: 40 km.Compatibility: Cisco ME 3400 series ethernet access switches, Cisco catalyst 3750 metro series switches.Weight: 2.65 oz..Warranty: 90 days limited.Cisco™ 1000BASE-EX SFP Transceiver module is designed to connect a gigabit ethernet port to a network and has dual LC/PC single mode connectors.
Cisco SFP28 to SFP28 Active Optical Cables are direct-attach fiber assemblies with SFP connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks. AOC cable require BASE-R FEC, or RS-FEC on the host ports. Works with Cisco UCS 2408 Fabric Extender only..SFP28 to SFP28 cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.This Active Optical Cables comes in two meters length.Direct attach assemblies with SFP connectors.Comes in brown.Maximum data transfer rate: 25000 Mbps.Only compatible with the Cisco UCS 2408 fabric extender.AOC cable require BASE-R FEC, or RS-FEC on the host ports
Cisco SFP28 copper direct-attach cables are suitable for very short links and offer a highly cost-effective way to establish a link between the SFP28 ports of Cisco switches within racks and across adjacent racks..Cable length: 16.4'.Comes in black.Meets or exceeds MSA SFF-8472, ELV, RoHS 6/6, and SFF-8402/IEEE 802.3by standards.1-year manufacturer limited warranty
Cisco SFP28 to SFP28 copper direct-attach 25GBASE-CR1 cables are suitable for very short links and offer a highly cost-effective way to establish a 25-Gigabit link between SFP28 ports of Cisco switches within racks and across adjacent racks..Passive copper direct-attach cable is suitable for very short links and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 6.56'.Features SFP28 to SFP28 connectors (male to male).Comes in brown.Do not require FEC on the host ports.Maximum data transfer rate: 25000Mbps.5-year manufacturer limited warranty.Features SFP28 cable type to better accommodate your precise requirements with maximum productivity.Fully compatible with switches
SFP+/SFP+.32.81'.Connector on first end: 1 x SFP+.Connector on second end: 1 x SFP+.Conductor: Copper.American wire gauge (AWG): 28.Features: Active cable (signal regeneration).Environmental parameters: Min operating temperature 32 degree F, Max operating temperature 158 degree F.Compatible with: Cisco Nexus 2000 Switch, Cisco Nexus 5000 Switch.Type: CU
Cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks..Yellow.Twinaxial SFP+ male/SFP+ male.8.2'.Material: Polycarbonate connector, polyvinyl chloride (PVC) jacket, Gauge: 30 AWG.Conductor: Copper.Power: 1 W consumption, Temperature: 0 - 70 deg C commercial range, -40 - 85 deg C storage range.Supports network devices.Compliant and standards: SFP+ MSA SFF-8461, UL #E116441, ELV, RoHS.Weight: 75 g.Compatibility: Cisco catalyst switch: 2960-24LC-S, 2960-24PC-L, 2960-24PC-S, 2960-24TC, 2960-24TC-L, 2960-24TC-S, 2960-48PST-L, 2960-48PST-S, 2960-48T, 2960-48TC, 2960-48TC-L, 2960-48TC-S, 2960-8TC, 2960-8TC-S, 2960G-24TC, 2960G-48TC, 2960G-8TC.Warranty: 90 days limited
Cisco CAB-CONSOLE-USB= 6 ft. Console Cable with USB Type A and mini-B connectors, system and spare connector..Copper conductor.Used for Cisco 1921, 1921 4-pair, 1921 ADSL2+, 1941, catalyst 2960, 2960-24, 2960-48.Cable length: 6'.Connector 1: 1 x 4 pin USB type A - male.CISCO™ Console Cable is used for 1921, 1921 4-pair, 1921 ADSL2+, 1941; Catalyst 2960, 2960-24, 2960-48.
4.92 ft.Cord length: 4.92'.Device supported: Network switch.Compatibility: Cisco catalyst series switches - 3750X-12S-E, 3750X-12S-S, 3750X-24P-L, 3750X-24P-S, Cisco catalyst series switches -3750-X, 3560-X
The Cisco SFP-H25G-CU2.5M Compatible 25G SFP28 Passive Direct Attach Copper Twinax Cable is designed for use in 25GBASE Ethernet. This cable is compliant with IEEE P802.3by Ethernet standard and SFP28 MSA Compliant. Each SFP28 connector comprises an EEPROM providing product information which can be read by the host system. With these features, this easy to install, high speed, cost-effective direct attach copper twinax Cable is suitable for short-distance connectivity within a rack or between adjacent racks in data centers..Cable length: 8'.Comes in black.Meets or exceeds RoHS 6/6, MSA SFF-8472, ELV, and SFF-8402/IEEE 802.3by standards.1-year manufacturer limited warranty
Cisco SFP28 to SFP28 copper direct-attach 25GBASE-CR1 cables are suitable for very short links and offer a highly cost-effective way to establish a 25-Gigabit link between SFP28 ports of Cisco switches within racks and across adjacent racks. The Cisco® 25GBASE SFP28 (Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications. The 25G Modules are based on SFP28 form factor..vPassive copper direct-attach cable is suitable for very short links and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 9.84'.Features SFP28 to SFP28 connectors (male to male).Interoperable with other IEEE-compliant 25GBASE-CR interfaces where applicable.Does not require FEC on the host ports.Maximum data transfer rate: 25000Mbps.5-year manufacturer limited warranty.Certified and tested on Cisco SFP28 ports for superior performance, quality, and reliability.High-speed electrical interface compliant to IEEE 802.3by
Cisco SFP28 to SFP28 active optical cables are direct-attach fiber assemblies with SFP connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks..Active optical cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 16.4'.Features SFP28 to SFP28 connectors (male to male).Allows you to access all of the networked data, swiftly and securely.Maximum data transfer rate: 25000Mbps.AOC cable requires BASE-R FEC or RS-FEC on the host ports.Network Device supported for better reliance and optimal performance.Features Fiber Optic cable type for your convenience and desired usability.Cisco 25G Active Optical Cable 5-meter - 16.40 ft Fiber Optic Network Cable for Network Device, Switch - First End: SFP28 Network - 25 Gbit/s
Cisco SFP28 to SFP28 active optical cables are direct-attach fiber assemblies with SFP connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks..Active optical cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 9.84'.Features SFP28 to SFP28 connectors (male to male).Features Fiber Optic cable type for your convenience and desired usability.Maximum data transfer rate: 25000Mbps.AOC cable requires BASE-R FEC or RS-FEC on the host ports.Allows you to access all of the networked data, swiftly and securely.Cisco 25G Active Optical Cable 3-meter - 9.84 ft Fiber Optic Network Cable for Network Device, Switch, Line Card - First End: SFP28 Network - Second End: SFP28 Network - 25 Gbit/s
The Cisco QSFP-4SFP10G-CU3M= 9.84' network cable is suitable for use with 40-Gigabit QSFP+ transceiver module. This gray network cable features one QSFP+ male connector on first end and four SFP+ male connectors on other end for connectivity. It has copper conductor for high electrical conductivity. This cable facilitates to connect a 40G QSFP+ port of a Cisco switch to four 10G SFP+ ports of a Cisco switch on the other end..Network cable is perfect for very short distances and offers a highly cost-effective way to connect within racks as well across adjacent racks.Cable length: 9.84'.Suitable for use with Cisco 40-Gigabit QSFP+ transceiver module.Comes in gray color.Connectors: One QSFP+ male on first end and four SFP+ male on second end.Conductor: Copper, Number of ways: four.Meets ELV, FCC CFR21 Part 1040, Laser Class 1, RoHS 6/6, UL standards and certifications
The Cisco 3.28' tangerine direct attach copper cable has QSFP+ male connector on first end and QSFP+ male connector on second end for enhanced connectivity. It features 30 AWG copper conductors for better conductivity. This copper cable is compatible with Cisco 40GBASE-SR4 QSFP+ copper module. It is perfect for short distances and provides a high cost-effective way to establish a 40-Gigabit link between QSFP+ ports of Cisco switches within racks and across adjacent racks..Direct attach copper cable is a cost-effective way to establish 40 Gigabit link.Cable length: 3.28'.Connections: QSFP+ male on first end and QSFP+ male on second end.Connectivity: Wired.Has 30 AWG copper conductor for superior conductivity.Meets IEC60825-1, UL #E116441 Compliant, ELV Compliant, CFR 21Section 1040, RoHS-6 standards and certifications.Data transfer rate: 40 Gbps.Comes in tangerine color.Suitable for use with Cisco 40GBASE-SR4 QSFP+ copper module
The Cisco™ 6.56' brown fiber optic network cable has one SFP+ network connectors on both the end. It works with Catalyst 3560 as well as 3850, Nexus 93XX as well as X9464, ONE Nexus 93XX and UCS 5108 blade server chassis. This cable has copper conductors for enhanced conductivity..Network cable for reliable connection.Cable length: 6.56'.Connections: One SFP+ network connectors on both end.Connectivity: Wired.Material: Copper conductor.Meets ELV, GR-20-CORE, IEC 60825-1, ITU-T G.709, Laser Class 1, RoHS, UL standards and certifications.Color: Brown.Cable type: Fiber optic.Compatibility: Catalyst 3560, 3850, Nexus 93XX, X9464, ONE Nexus 93XX, UCS 5108 blade server chassis
The Cisco™ SFP-10G-AOC7M= 10GBase-AOC SFP+ to SFP+ fiber optic direct attach cable in blue color, offers connection within racks and across adjacent racks. The 22.97' direct attach cable with copper media, supports network devices..Twinaxial direct attach cable is perfect for signaling applications.Cable length: 22.97'.Color: Blue.Connectors: One SFP+ on both the ends.Device supported: Network device.Ethernet technology: 10 Gigabit Ethernet.Transceiver type: AOC.Media: Copper.Meets GR-20-CORE, GR-326-CORE, GR-1435-CORE, ITU-T G.709, IEEE 802.3, ITU-T G.975, ITU-T G.975.1, RoHS certifications and standards
Cisco Twinax Cable, Passive, 30AWG Cable Assembly.Twinaxial for Network Device.4.92 ft.SFP+ Male Network.SFP+ Male Network.Black.Conductor: Copper.Power: 1 W consumption, Temperature: 0 - 70 deg C commercial range, -40 - 85 deg C storage range.Weight: 75 g.Compatibility: Cisco catalyst switch: 2960-24LC-S, 2960-24PC-L, 2960-24PC-S, 2960-24TC, 2960-24TC-L, 2960-24TC-S, 2960-48PST-L, 2960-48PST-S, 2960-48T, 2960-48TC, 2960-48TC-L, 2960-48TC-S, 2960-8TC, 2960-8TC-S, 2960G-24TC, 2960G-48TC, 2960G-8TC.Warranty: 90 days limited.Cisco™ 4.92' Twinaxial SFP+/SFP+ passive cable in black color used as a network device features copper conductor for superior conductivity.
Cisco QSFP-H40G-CU3M 40GBASE-CR4 9.84' QSFP Direct-attach copper cable with channels offers uninterrupted signal transmission with 40 gigabit QSFP+ transceiver. Channels are easily broken out to four separate 10 gigabit SFP+ transceivers. The QSFP+ transceiver module offers secure connection to the electrical circuitry of the system with either a copper or an optical external network. Transceiver is perfect for switches, routers and data center equipments to offer higher density..Twinaxial cable for easy signal transmission.Comes in orange color for new look.Compatible with Cisco 40GBASE QSFP+ modules.Has cable length of 9.84' for convenience.Supports network device to connect computers or other electronic devices together and provides copper conductors for high conductivity.Has QSFP+ connector on first end for flexibility.Has operating temperature range of 32 - 158 deg F for precise operation.Meets IEC60825-1, CFR 21Section 1040, UL E116441, ELV standards.Cisco 40GBASE-CR4 9.84' QSFP Direct-attach copper cable has hot-swappable form factor with 4 optical transmit and receive channels. Optical fiber offers easy signal transmission.