Cisco Connectors

The Cisco multi-mode rugged SFP module adapts your switch or router, enabling you to connect long-range cables. As a result, you can extend the range of your network and expand connectivity. The SFP module is made with an intuitive design that is easy to install and use, so you can expand your network quickly and with minimum hassle..Interfaces/ports: 1 x LC duplex 100Base-FX.Dimensions: 0.33"(H) x 0.52"(W) x 2.22"(D).Compatibility: Cisco 100 m Ethernet SFP Compatibility matrix.Connectivity technology: Wired.Optical wave length: 1310 nm.Temperature: 122 deg F max operating.Compliant standards: IEEE 802.3, IEEE 802.3ah.Connectivity media: Multi mode fiber 100Base-FX.Max transfer distance: 1.2 miles.Data transfer rate: 100 Mbps fast ethernet.Form factor: Hot-swappable.90 days limited warranty.Cisco Multi-Mode Rugged SFP Module - Hot-Swap Capability

Cisco 100BASE-FX small form-factor pluggable (SFP) fast Ethernet interface converter is a hot-swappable device that plugs into a gigabit Ethernet SFP port on Cisco catalyst 3750 series, 3560 series, and 2970 series switches..Interfaces/ports: 1 x LC duplex 100Base-FX.Dimensions: 0.4"(H) x 2.2"(W) x 1/2"(D).Compatibility: Cisco catalyst 3750, 3560, and 2970 series switches.Connectivity media: 62.5/125 um multi mode fiber, 50/125 um multi mode fiber.Transmit (dBm): 50/125-micron: -23.5 min, -14max, 62.5/125-micron: -20 min, -14max, receive (dBm): 50/125-micron: -33.35 min, -11.8 max, 62.5/125-micron: -33.35 min, -11.8 max.Distance supported: 6.5'.Operating temperature: 32 - 158 deg F, storage temperature: -40 - 185 deg F.Surge current: 350 typical, wavelength (nm): 1270 min, 1300 typical, 1380 max.Power consumption: 1.5 W per port.Input voltage: 3.3 V - 3.5 V device, 3.3 V typical device.Input current: 405 mA typical, 450 mA maximum.Data transfer rate: 100 Mbps fast Ethernet full duplex.MTBF: 12,820,512 hours.Form factor: Hot-swappable.System requirements: Cisco IOS software release 12.2(20)SE1.Application/usage: Data networking.Regulatory and standards compliance: IEC 60825-1.SFP fast ethernet interface converter 100FX SFP on GE SFP ports for DSBU switches.

Cisco CAB-CONSOLE-RJ45 Console cable has connection between 1 x RJ-45 male network and 1 x 9-pin DB-9 female serial for better performance. 6' Console cable is often used to connect a computer terminal to a router's console port..Console cable is perfect for switches.Compatible with 3800 series integrated services router, Catalyst 2960-S series switches, 2800 series integrated services routers.Cable length: 6'.Connector on first end: 1 x RJ-45 male, connector on second end: 9 pin female D-Sub (DB-9).Copper conductor.Cable type: Serial, DB-9/RJ-45.Cisco 6' Serial console cable is compatible with Cisco 3800 series integrated services router, Catalyst 2960-S series switches and 2800 series integrated services routers.

The Cisco SFP28 (Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications. The 25G Modules are based on SFP28 form factor. This short reach module supports a link length of up to 300/400m over OM3/4 at 10G, and up to 300/400m over OM3/4 at 25G. It also supports link lengths of 82m over OM2 at 10G, and up to 70m over OM2 at 25G. This module requires RS-FEC on the host port for full reach operation at 25G. Using BASE-R FEC the module can support 70/100m over OM3/4 and with-out FEC it can support 30/50m over OM3/4 at 25G. For 10G operation FEC is not required..This module offers high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications.Wavelength: 850nm.Supports FCoE with the appropriate host s/w support.Features dual LC/PC connector

Cisco QSFP to QSFP copper direct-attach cable are suitable for very short links and offer a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of Cisco switches within racks and across adjacent racks. Made of copper materials and comes in brown with 1m length..QSFP to QSFP cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 1m.Direct attach assemblies with QSFP-100G connectors.Made of copper and comes in brown.Maximum data transfer rate: 100 Gbps

Cisco QSFP to QSFP copper direct-attach cable are suitable for very short links and offer a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of Cisco switches within racks and across adjacent racks. Made of copper materials and comes in brown with 3m length..QSFP to QSFP cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 3m.Direct attach assemblies with QSFP-100G connectors.Made of copper and comes in orange.Maximum data transfer rate: 100 Gbps

Cisco QSFP to QSFP copper direct-attach cable are suitable for very short links and offer a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of Cisco switches within racks and across adjacent racks. Made of copper materials and comes in brown with 5m length..QSFP to QSFP cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 5m.Direct attach assemblies with QSFP-100G connectors.Made of copper and comes in orange.Maximum data transfer rate: 100 Gbps

Cisco™ 1000BASE-EX SFP Transceiver module is hot-swappable and supports a 1310 nm wavelength signaling. Module operates on standard SMF optic link that spans up to a distance of 40 km..Interface/ports details: 1 x 1000Base-EX network.Media and performance: G.652 micrometer single mode optical fiber.Ethernet technology: 1 Gbps gigabit ethernet.Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D).Application/usage: Data networking.Form factor: Hot swappable.Wavelength: 1310-nm, Reach: 40 km.Compatibility: Cisco ME 3400 series ethernet access switches, Cisco catalyst 3750 metro series switches.Weight: 2.65 oz..Warranty: 90 days limited.Cisco™ 1000BASE-EX SFP Transceiver module is designed to connect a gigabit ethernet port to a network and has dual LC/PC single mode connectors.

Cisco SFP28 to SFP28 Active Optical Cables are direct-attach fiber assemblies with SFP connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks. AOC cable require BASE-R FEC, or RS-FEC on the host ports. Works with Cisco UCS 2408 Fabric Extender only..SFP28 to SFP28 cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.This Active Optical Cables comes in two meters length.Direct attach assemblies with SFP connectors.Comes in brown.Maximum data transfer rate: 25000 Mbps.Only compatible with the Cisco UCS 2408 fabric extender.AOC cable require BASE-R FEC, or RS-FEC on the host ports

Cisco SFP28 to SFP28 copper direct-attach 25GBASE-CR1 cables are suitable for very short links and offer a highly cost-effective way to establish a 25-Gigabit link between SFP28 ports of Cisco switches within racks and across adjacent racks..Passive copper direct-attach cable is suitable for very short links and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 6.56'.Features SFP28 to SFP28 connectors (male to male).Comes in brown.Do not require FEC on the host ports.Maximum data transfer rate: 25000Mbps.5-year manufacturer limited warranty.Features SFP28 cable type to better accommodate your precise requirements with maximum productivity.Fully compatible with switches

Cisco STACK-T3-1M 3.3 ft stacking cable for Catalyst 9300L..Cisco stacking cable for Catalyst 9200 series switches.Cable length: 3.28'.Outer shell made of black PVC

Cisco™ 2 m twinax cable for 10GBASE-CU SFP+ allows to have point-to-point in-rack and across rack network switch/server connections. Cable offers low power consumption with 0.5 W for superior performance and has 30 AWG, 100 ohm impedance..Twinaxial.Connector: 1 x SFF-8431 SFP+ first end, 1 x SFF-8431 SFP+ second end.6.56'.Brown.Conductor: Copper.Compatibility: Cisco 2960-24LC-S, 2960-24TC-L, 2960-48T, 2960-8TC, 2960S-24PD-L, 2960S-48FPD-L, 2960S-48LPS-L and 2960S-48TS-S catalyst switches.Power consumption: 1 W.Temperature: 0 to 70 deg C operating.Dimensions: 8.5 mm(H) x 13.4 mm(W) x 56.5 mm(D).Features smallest 10G form factor.Hot swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch.Provides flexibility of interface choice, supports pay-as-you-populate model, supports digital optical monitoring capability.Supports the Cisco quality identification (ID) feature that enables a Cisco switch to identify whether the module is certified and tested by Cisco.Supports 10GBase Ethernet and OTU2/OTU2e.Complaints and standards: RoHS.Warranty: 90 days limited.Cisco™ 2 m Twinax 10GBASE-CU SFP+ cable supports multi-gigabit data rates up to 10.5 Gb/s and is hot-swappable with fiber optic modules.

SFP+/SFP+.32.81'.Connector on first end: 1 x SFP+.Connector on second end: 1 x SFP+.Conductor: Copper.American wire gauge (AWG): 28.Features: Active cable (signal regeneration).Environmental parameters: Min operating temperature 32 degree F, Max operating temperature 158 degree F.Compatible with: Cisco Nexus 2000 Switch, Cisco Nexus 5000 Switch.Type: CU

Cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks..Yellow.Twinaxial SFP+ male/SFP+ male.8.2'.Material: Polycarbonate connector, polyvinyl chloride (PVC) jacket, Gauge: 30 AWG.Conductor: Copper.Power: 1 W consumption, Temperature: 0 - 70 deg C commercial range, -40 - 85 deg C storage range.Supports network devices.Compliant and standards: SFP+ MSA SFF-8461, UL #E116441, ELV, RoHS.Weight: 75 g.Compatibility: Cisco catalyst switch: 2960-24LC-S, 2960-24PC-L, 2960-24PC-S, 2960-24TC, 2960-24TC-L, 2960-24TC-S, 2960-48PST-L, 2960-48PST-S, 2960-48T, 2960-48TC, 2960-48TC-L, 2960-48TC-S, 2960-8TC, 2960-8TC-S, 2960G-24TC, 2960G-48TC, 2960G-8TC.Warranty: 90 days limited

Cisco CAB-CONSOLE-USB= 6 ft. Console Cable with USB Type A and mini-B connectors, system and spare connector..Copper conductor.Used for Cisco 1921, 1921 4-pair, 1921 ADSL2+, 1941, catalyst 2960, 2960-24, 2960-48.Cable length: 6'.Connector 1: 1 x 4 pin USB type A - male.CISCO™ Console Cable is used for 1921, 1921 4-pair, 1921 ADSL2+, 1941; Catalyst 2960, 2960-24, 2960-48.

Cisco SFP28 to SFP28 copper direct-attach 25GBASE-CR1 cables are suitable for very short links and offer a highly cost-effective way to establish a 25-Gigabit link between SFP28 ports of Cisco switches within racks and across adjacent racks. The Cisco® 25GBASE SFP28 (Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications. The 25G Modules are based on SFP28 form factor..vPassive copper direct-attach cable is suitable for very short links and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 9.84'.Features SFP28 to SFP28 connectors (male to male).Interoperable with other IEEE-compliant 25GBASE-CR interfaces where applicable.Does not require FEC on the host ports.Maximum data transfer rate: 25000Mbps.5-year manufacturer limited warranty.Certified and tested on Cisco SFP28 ports for superior performance, quality, and reliability.High-speed electrical interface compliant to IEEE 802.3by

The Cisco™ GLC-TE= Gigabit Ethernet SFP transceiver module is suitable for 7700 F3-series, 9372PX and 9396PX Cisco Nexus series switches. This SFP transceiver module has RJ-45 1000Base-T network LAN ports for connectivity. It supports twisted pair media for reliable data transfer..SFP transceiver module for 7700 F3-series, 9372PX and 9396PX Cisco Nexus series switches.Color: Silver.Connectors: One RJ-45 1000Base-T network LAN.Media type supported: Twisted pair.Ethernet technology: Gigabit Ethernet

Cisco SFP28 to SFP28 active optical cables are direct-attach fiber assemblies with SFP connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks..Active optical cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 16.4'.Features SFP28 to SFP28 connectors (male to male).Allows you to access all of the networked data, swiftly and securely.Maximum data transfer rate: 25000Mbps.AOC cable requires BASE-R FEC or RS-FEC on the host ports.Network Device supported for better reliance and optimal performance.Features Fiber Optic cable type for your convenience and desired usability.Cisco 25G Active Optical Cable 5-meter - 16.40 ft Fiber Optic Network Cable for Network Device, Switch - First End: SFP28 Network - 25 Gbit/s

Cisco Cabinet jumper power cord has voltage rating of 250 VAC and current rating of 10 A. Perfect for single-use servers to handle potential demand peaks. Efficiency of the power cord is the amount of energy that makes its way to the components needing the power. Reduces audible distortions such as sluggish bloated bass response, dynamic compression, harshness in the upper mid-range, loss of clarity and harmonic integrity..Power cord is perfect for switch.Compatible with Nexus 5000 series data center class switches, Nexus 2000 series fabric extenders.Comes in black color.Cable length: 2.25'.Connector on first end: 1 x IEC 60320 C14, connector on second end: 1 x IEC 320 EN 60320 C13.Current rating: 16A, frequency: 50Hz, voltage rating: 250VAC.Easily operates at current rating of 16 A for efficient use.Recommended to use with Cisco Nexus 5000 series data center class switches, Cisco Nexus 2000 series fabric extenders.Cisco Cabinet jumper power cord incorporates C13-C14 molded connectors at each end to offer reliable connectivity. Perfect choice to offer reliable connection to the servers.

Cisco SFP28 to SFP28 active optical cables are direct-attach fiber assemblies with SFP connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks..Active optical cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 9.84'.Features SFP28 to SFP28 connectors (male to male).Features Fiber Optic cable type for your convenience and desired usability.Maximum data transfer rate: 25000Mbps.AOC cable requires BASE-R FEC or RS-FEC on the host ports.Allows you to access all of the networked data, swiftly and securely.Cisco 25G Active Optical Cable 3-meter - 9.84 ft Fiber Optic Network Cable for Network Device, Switch, Line Card - First End: SFP28 Network - Second End: SFP28 Network - 25 Gbit/s

The Cisco™ SFP-10G-AOC3M= 10GBASE-AOC SFP+ 3m fiber optic network cable comes with the SFP+ network copper connectors. It offers the data transfer rate up to 10.5 Gb/s and is hot swappable. This cable operates at a temperature range of 0 to 70 deg C..Network cable is well suited for very short distances.Dimensions: 3 m L.Comes in orange color and features copper conductor for better electrical conductivity.Interface: One SFP+ network first end, one SFP+ network second end.Has fiber optic cable for reliable data transfer.Compatible with networking device.Operating temperature: 32 - 158 deg F.Meets RoHS, Green, GR-20-CORE, GR-326-CORE, GR-1435-CORE, ITU-T G.709, IEEE 802.3, ITU-T G.975, ITU-T G.975.1 certification and standards.Comes with 90 days warranty

The Cisco QSFP-4SFP10G-CU3M= 9.84' network cable is suitable for use with 40-Gigabit QSFP+ transceiver module. This gray network cable features one QSFP+ male connector on first end and four SFP+ male connectors on other end for connectivity. It has copper conductor for high electrical conductivity. This cable facilitates to connect a 40G QSFP+ port of a Cisco switch to four 10G SFP+ ports of a Cisco switch on the other end..Network cable is perfect for very short distances and offers a highly cost-effective way to connect within racks as well across adjacent racks.Cable length: 9.84'.Suitable for use with Cisco 40-Gigabit QSFP+ transceiver module.Comes in gray color.Connectors: One QSFP+ male on first end and four SFP+ male on second end.Conductor: Copper, Number of ways: four.Meets ELV, FCC CFR21 Part 1040, Laser Class 1, RoHS 6/6, UL standards and certifications

The Cisco 10GBASE SFP+ module gives you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications..Transceiver module gives you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.Comes in gray.Power consumption: 0.1W.Compact 10G form factor for great density per chassis.Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing).Supports “pay-as-you-populate” model for investment protection and ease of technology migration.Digital optical monitoring for strong diagnostic capabilities.Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link.5-year manufacturer limited warranty

The Cisco small form-factor pluggable portfolio offers customers a wide variety of high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications. The 25G Modules are based on SFP28 form factor..Transceiver module for MMF.Pull tab comes in beige.Supports a link length of 70/100m on OM3/4 MMF.Requires RS-FEC on the host ports.Maximum power consumption: 1.2W.Wavelength: 850nm.Cable type: MMF.Core size: 50 microns.Modal bandwidth: 2000 OM3/4700 OM4/4700 OM5 on 70/100/100m cable distances.Support FCoE with the appropriate host s/w support.5-year manufacturer limited warranty

The Cisco 3.28' tangerine direct attach copper cable has QSFP+ male connector on first end and QSFP+ male connector on second end for enhanced connectivity. It features 30 AWG copper conductors for better conductivity. This copper cable is compatible with Cisco 40GBASE-SR4 QSFP+ copper module. It is perfect for short distances and provides a high cost-effective way to establish a 40-Gigabit link between QSFP+ ports of Cisco switches within racks and across adjacent racks..Direct attach copper cable is a cost-effective way to establish 40 Gigabit link.Cable length: 3.28'.Connections: QSFP+ male on first end and QSFP+ male on second end.Connectivity: Wired.Has 30 AWG copper conductor for superior conductivity.Meets IEC60825-1, UL #E116441 Compliant, ELV Compliant, CFR 21Section 1040, RoHS-6 standards and certifications.Data transfer rate: 40 Gbps.Comes in tangerine color.Suitable for use with Cisco 40GBASE-SR4 QSFP+ copper module

Cisco 32Gbps fiber channel SFP+ transceiver provides fiber channel connectivity for 8/16/32-Gbps ports on the MDS 9000 family platform. Cisco fiber channel shortwave SFP+ offers 8/16/32-Gbps autosensing fiber channel connectivity..32Gbps shortwave fiber channel SFP+ transceiver provides fiber channel connectivity for 8/16/32Gbps ports on the MDS 9000 family platform.Dimensions: 0.33"H x 2.22"W x 0.53"D.Comes in silver.Wavelength: 850nm.Fiber type: MMF

The Cisco™ SFP-10G-AOC1M= SFP+ 3.28' fiber optic network cable features one SFF-8431 SFP+ network connector on both ends. Cable in beige, is perfect for applications requiring high bandwidth. It withstands temperature range of 23 to 158 deg F..Network cable for home or office applications.Dimensions: 3.28' cable.Color: Beige.Interface/ports: One SFF-8431 SFP+ network connector on both ends.Cable type: Fiber optic.Temperature: 23 - 158 deg F operating.Meets RoHS, MSA, UL E116441 and ELV certifications and standards

The Cisco QSFP module supports link lengths of up to 10 kilometer over a standard pair of G.652 single-mode fiber with duplex LC connectors. The module supports 40GBASE Ethernet rate only. The 40 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed in the device. Does not support FCoE..Transceiver module for MMF.Pull tab comes in blue.Guarantees a link BER of 1E-12 when supporting 10km on SMF.Maximum power consumption: 3.5W.Wavelength: 1310nm.Cable type: SMF.Core size: G.652 microns.Cable distance: 10km.5-year manufacturer limited warranty

The Cisco™ 6.56' brown fiber optic network cable has one SFP+ network connectors on both the end. It works with Catalyst 3560 as well as 3850, Nexus 93XX as well as X9464, ONE Nexus 93XX and UCS 5108 blade server chassis. This cable has copper conductors for enhanced conductivity..Network cable for reliable connection.Cable length: 6.56'.Connections: One SFP+ network connectors on both end.Connectivity: Wired.Material: Copper conductor.Meets ELV, GR-20-CORE, IEC 60825-1, ITU-T G.709, Laser Class 1, RoHS, UL standards and certifications.Color: Brown.Cable type: Fiber optic.Compatibility: Catalyst 3560, 3850, Nexus 93XX, X9464, ONE Nexus 93XX, UCS 5108 blade server chassis

Cisco™ CVRQSFPSFP10G QSFP to SFP/SFP+ Module Adapter for Cisco™ Ethernet transceiver modules.Module adapter offers flexible Gigabit Ethernet connectivity.Dimensions: 0.53"H x 0.72"W x 3.07"D.Suitable with Cisco 40-Gigabit Ethernet transceiver modules.Interface/ports: QSFP, one SFP/SFP+.Has USB interface.Sensitivity: 93.6 dB SPl at 1 kHz (speaker), -48 to -44 dB at 1 kHz (microphone).Frequency response: 150 Hz to 7 kHz (speaker), 100 Hz to 10 kHz at 6 dB (microphone).Impedance: 32 +/- 4.8 Ohms speaker.Power source: USB.Dimensions: 28 mm x 3.9 mm speaker.Input power: 5 mW at 0.4 V, max input: 10 mW at 0.56 V.Has wideband headset bandwidth, electret condenser microphone, corded mono headset for VoIP softphone.Features wideband speaker bandwidth music mode, wideband speaker bandwidth speak mode and wideband microphone bandwidth.Temperature: -10 to 50 deg C (operating), -30 to 80 deg C (storage), leatherette ear cushions.Features HD voice, PeakStopTM technology, UC plug-and-play, HiFi sound, remote call control/easy call management, Jabra software compatible.Includes Jabra Evolve 20/20SE headset, warning leaflet, warranty leaflet, Quick start guide, USB controller.Meets CE, FCC, KCC, RCM, UL (Regulatory Approvals) MS Lync, Avaya, Cisco(Industrial certifications) standards.Weight: 0.38 lbs..Comes with 2 years warranty

The Cisco® 40GBase-SR4 QSFP+ wired transceiver module offers links up to 492' long via multi-mode optical fiber at a wavelength of 840 - 860 nm. It supports both twisted-pair and optical fiber media types. This Hot-swappable, plug-in module allows high-bandwidth 40G optical links over 12-fiber parallel fiber terminated with MPO/MTP multifiber connectors..QSFP+ transceiver module for data networking and optical network.Dimensions: 0.5" x 0.7" x 2.9".Interfaces/ports: One MPO/MTP 40GBase-SR4 network.Max transfer distance: 492', Optical wave length: 840 - 860 nm.Media type supported: Optical fiber, Fiber mode supported: Multi-mode.Connectivity technology: Wired.Form factor: Hot-swappable, plug-in module.Power consumption: 1.5 W operational.Temperature: 32 - 158 deg F (operating), -40 - 185 deg F (storage).Meets FCC CFR21 Part 1040, GR-1435-CORE, GR-20-CORE, GR-326-CORE, IEC 60825-1 Class 1, MSA SFF-8431 certifications and standards.Comes with 1 year limited warranty

The Cisco 10/25GBASE-LR Module supports a link length of 10 kilometers on standard Single-Mode Fiber (SMF) G.652 at both 10G and 25G. This module requires RS-FEC on the host ports for operation at 25G..This 10/25GBASE-LR module supports a link length of 10km on standard Single-Mode Fiber (SMF) G.652 at both 10G and 25G.Max power consumption: 1.3W.Meets or exceeds the IEEE 802.3by and IEEE 802.3cc standards.Certified and tested on Cisco SFP28 ports for superior performance, quality, and reliability.This module requires RS-FEC on the host ports for operation at 25G.Transmit and receive wavelength: 1260-1355nm (10G) and 1295-1325nm (25G)

The Cisco™ SFP-10G-AOC7M= 10GBase-AOC SFP+ to SFP+ fiber optic direct attach cable in blue color, offers connection within racks and across adjacent racks. The 22.97' direct attach cable with copper media, supports network devices..Twinaxial direct attach cable is perfect for signaling applications.Cable length: 22.97'.Color: Blue.Connectors: One SFP+ on both the ends.Device supported: Network device.Ethernet technology: 10 Gigabit Ethernet.Transceiver type: AOC.Media: Copper.Meets GR-20-CORE, GR-326-CORE, GR-1435-CORE, ITU-T G.709, IEEE 802.3, ITU-T G.975, ITU-T G.975.1, RoHS certifications and standards

The Cisco® STACK-T1-3M= Stackwise-480 stacking cable spare of length 9.8', is compatible with Cisco Catalyst 3850 series switches..Cable length: 9.8'.Compatible with Cisco Catalyst 3850 series 3850-24P-E, 3850-24P-L, 3850-24P-S, 3850-24PW-S, 3850-24T-L, 3850-48F-E, 3850-48F-L, 3850-48T-S, 3850-48P-L.Comes with copper conductor for better conductivity.Well suited to use with PC and supports network devices.Cisco STACK-T1-3M 9.84' Type 1 stacking cable is compatible with Catalyst 3850 series switches. Supports any network devices.

The Cisco™ AIR-CAB005LL-N= 5' low-loss antenna cable is suitable for use with Aironet 1500 series AIR-LAP1510AG-E-K9/AIR-LAP1505AG-E-K9 outdoor access point. It features 90 deg angled N-Type male connector on both ends for ensuring reliable connection..Low-Loss antenna cable is ideal for outdoor access point.Cable length: 5'.Compatible with 1500 series AIR-LAP1510AG-E-K9, AIR-LAP1505AG-E-K9, outdoor access point, 1400 series 2.4 GHz and 5 GHz antennas.Connectors: N-Type male on both ends, 90 deg angled connector.5' extension antenna cable features N-type male on both ends, 90 deg angled connector and compatible with outdoor access point, 1400 series 2.4 GHz and 5 GHz antennas.

It installs in a Mini-GBIC compliant slot and features a duplex LC connector that is compatible with 850nm multi-mode fiber cables..Type of Product/Use: Transceiver.Dimensions/Size: 2.2 x 0.5 x 0.3 inch.True color: Silver.850nm Wavelength for Multi-Mode Fiber.The Gigabit Ethernet SX Mini-GBIC SFP Transceiver from Cisco is an expansion module that adds high-density fiber connectivity to compatible devices.

It installs in a Mini-GBIC compliant slot and features a duplex LC connector that is compatible with 850nm multi-mode fiber cables..Type of Product/Use: Transceiver.Dimensions/Size: 2.2 x 0.5 x 0.3 inch.True color: Silver.850nm Wavelength for Multi-Mode Fiber.Connectivity media: 62.5/125 microm multi-mode optical fiber, 50/125 microm multi-mode optical fiber.Max transfer distance: 721.78 ft 62.5/125 microm, 902.23 ft 62.5/125 microm, 1640.42 ft 50/125 microm, 1804.46 ft 50/125 microm optical fiber.Data transfer rate: 1 Gbps gigabit-ethernet.Transmitter spec: Power: -9.5 to -4 dBm, Receiver spec: sensitivity: -20 to -17dBm, Input power: -20 to -17 dBm.Stress sensitivity: 50/125 um: -13.5 dBm, 62.5/125 um: -12.5 dBm, Wavelength: 850 nm (850nm TYP., 830-860nm) MMF.Environmental condition: Operating temperature: 32 - 104 deg F, Storage temperature: -4 -158 deg F Operating humidity: 0% to 85% non-condensing.Modular bandwidth for MMF: 62.5/125um MMF at 160 MHz/km, up to 220m, 62.5/125um MMF at 200 MHz/km, up to 275m, 50/125um MMF at 400 MHz/km, up to 500m, 50/125um MMF at 500 MHz/km, up to 550m.Provides a simple way to add Gigabit functionality to your Linksys switch.Gigabit fiber is often-used to connect two switches together.Technology used depends on the distance between the two switches.SX module uses 850 nanometer wavelength light in multimode fiber-optic cables, and can achieve distances up to 220 or 550 meters, depending on the fiber used.The Gigabit Ethernet SX Mini-GBIC SFP Transceiver from Cisco is an expansion module that adds high-density fiber connectivity to compatible devices.

Easily manage your network capabilities using a single Cisco IOS XE Software-based platform with the Cisco stacking cable and switch. Suitable for public and private networks, this copper cable is meant for the Cisco Catalyst 3850 series switches. With both wired and wireless features bundled into one platform in the Cisco switch, it allows users a single point of access to a network, making network management simple and easy. This reduces network complexity and enables faster network operations. With this stacking cable solution, increase the bandwidth of not only your wired connection but also your wireless throughput..Spare cable for Cisco Catalyst 3850 series switch.Copper conductor for superior conductivity.3.28' long cable compatible with Cisco 3850 series switch.90 days' limited warranty.The Cisco StackWise 480 3.28' Stacking Cable Spare is designed for the Cisco series switch which offers an enterprise-level solution of wired and wireless features on one platform.

Cisco QSFP-100G to QSFP-100G AOC cables are suitable for short distances and offer a flexible way to connect within racks and across racks. Active optical cables are much thinner and lighter than copper cables, which makes cable management easier. AOCs enable efficient system airflow, which is critical in high-density racks..Active optical cable, 1m length.Interface: 100GBASE QSFP.Maximum outer dimensions for the QSFP connector module: 0.53"H x 0.72"W x 2.85"D.5-year manufacturer limited warranty

Cisco QSFP-H40G-CU5M 40GBASE-CR4 16.4' QSFP Direct-attach copper cable with channels offers uninterrupted signal transmission with 40 gigabit QSFP+ transceiver. Channels are easily broken out to four separate 10 gigabit SFP+ transceivers. The QSFP copper cable offers secure connection to the electrical circuitry of the system with either a copper or an optical external network. Transceiver is perfect for switches, routers and data center equipments to offer higher density..Twinaxial cable for easy signal transmission.Comes in gray color for new look.Has cable length of 16.4' for convenience.Supports network device to connect computers or other electronic devices together and provides copper conductors for high conductivity.Has 1 x QSFP+ connector on first end and 1 x QSFP+ connector on second end for flexibility.Has operating temperature range of 32 - 158 deg F for precise operation.Meets RoHS compliance.Flexibility of interface choice.Hot-swappable input/output device that plugs into a 40-Gigabit Ethernet QSFP+ ethernet switch port.Support for 40GBASE Ethernet.Operating temperature: 32 - 158 deg F.Designed for Cisco Catalyst 3016.Cisco 40GBASE-CR4 16.4' QSFP Direct-attach copper cable has hot-swappable form factor with 4 optical transmit and receive channels. Optical fiber offers easy signal transmission.

The Cisco 10GBASE-SR module supports link lengths up to 26m on standard Fiber Distributed Data Interface (FDDI) grade multimode fiber (MMF). Using 2000MHz x km of MMF (OM3), it is possible to create link lengths up to 300m, and with 4700MHz x km MMF (OM4), link lengths up to 400m are possible..Multimode fiber optic transceiver with dual LC/PC connector.10GBASE SFP+ module for data center, enterprise wiring closet, and service provider transport applications.Provides data transfer rates up to 10Gbps.Supports link lengths up to 26m on standard FDDI-grade MMF; up to 300m on 2000MHz x km MMF (OM3); and up to 400m on 4700MHz x km MMF (OM4).Power consumption: 1W.Hot-swappable, plugs into an Ethernet SFP+ port.Compliant with the SFP+ MSA SFF-8431 standard.Wavelength: 850nm.Form factor: Hot-swappable.MSA compliant.Commercial temperature: 32 to 158 degrees Fahrenheit.Supports digital optical monitoring capability.Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link.1-year manufacturer limited warranty

Cisco QSFP-H40G-CU3M 40GBASE-CR4 9.84' QSFP Direct-attach copper cable with channels offers uninterrupted signal transmission with 40 gigabit QSFP+ transceiver. Channels are easily broken out to four separate 10 gigabit SFP+ transceivers. The QSFP+ transceiver module offers secure connection to the electrical circuitry of the system with either a copper or an optical external network. Transceiver is perfect for switches, routers and data center equipments to offer higher density..Twinaxial cable for easy signal transmission.Comes in orange color for new look.Compatible with Cisco 40GBASE QSFP+ modules.Has cable length of 9.84' for convenience.Supports network device to connect computers or other electronic devices together and provides copper conductors for high conductivity.Has QSFP+ connector on first end for flexibility.Has operating temperature range of 32 - 158 deg F for precise operation.Meets IEC60825-1, CFR 21Section 1040, UL E116441, ELV standards.Cisco 40GBASE-CR4 9.84' QSFP Direct-attach copper cable has hot-swappable form factor with 4 optical transmit and receive channels. Optical fiber offers easy signal transmission.

Cisco Transceiver module is compatible with Nexus 3000 series, Nexus 6500/7000 series, ASR 9000 series routers. Transceiver module suits MMF, 4-lanes, 850-nm wavelength, 12-fiber MTP/MPO connector..QSFP+ transceiver module is used for data center, high performance computing networks, enterprise core and distribution layers applications.Dimensions: 0.5"H x 0.7"W x 2.9"D.Interface/ports: 1 x MPO 40GBase-SR4 network.Maximum data transfer rate: 40 Gbps.Ethernet technology: 40 Gigabit Ethernet.Media type supported: Optical fiber, fiber mode supported: Multi-mode.Nominal wavelength: 850 nm, core size: 50 micron.Maximum transfer distance: 492', modal bandwidth: 500 MHz/km (OM2), 2000 MHz/km (OM3), 4700 MHz/km (OM4).Transmit power: -1 dBm per lane, receive power: 2.4 dBm.Compatible with Cisco Nexus 3064 switch, Nexus 2248PQ 10GE, ASR 9000 Series, 3016Q, 3064-E, 3064PQ, 3064-X, 6001.Form factor: Hot swappable.RoHS-6, MSA compliant.High-speed electrical interface compliant to IEEE 802.3ba.Cisco Transceiver module offers customers a wide variety of high-density and low-power 40GB Ethernet connectivity options for data center.

With its thicker diameter to carry the light of multiple wavelengths, this multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity..Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Provides high performance and flexible solution with 100 Gigabit Ethernet connectivity.With 100GBase-SR4 technology, get up to 100Gbps data transfer rate over optical fiber cable

Cisco™ BiDi Short-reach transceiver module with LC duplex 40GBase-X interface operates with 50 micrometer multi-mode optical fiber. Hot-swappable transceiver module with LC connectors can be used for data networking/optical network applications..Interfaces/ports: 1 x LC duplex 40GBase-X.Media & performance: 50 micrometer multi-mode optical fiber 40GBase-X.Ethernet technology: Gigabit Ethernet.Form factor: Hot-swappable.Data transfer rate: 40 Gbps.Connector: LC.Dimensions: 0.5"(H) x 0.7"(W) x 2.9"(D).Wavelength: 832 - 918 nm.Distance supported: 100/150 m.Compatibility: Cisco Nexus 9000 series switches.Power: 5 dBm transmit, 5 dBm receive, Power consumption: 3.5 W.Application/usage: Data networking, optical network.Gray.Operating temperature: -10 - +70 deg C.Certifications and standards:: RoHS-6, Green compliant.Warranty: 90 days limited.Cisco™ BiDi Short-reach transceiver module with LC duplex 40GBase-X interface transfers data at the rate of 40 Gb/s and is compatible with Cisco Nexus 9000 series switches.

The Cisco Quad Small Form-Factor Pluggable (QSFP) portfolio offers customers high-density and low-power Ethernet connectivity for data center, high-performance computing networks, enterprise core and distribution layers, and service provider applications. The Cisco QSFP dual-rate bi-directional (BiDi) transceiver is a pluggable optical transceiver with a duplex LC connector interface for short-reach data communication and interconnect applications using Multi-Mode Fiber (MMF)..Uses multimode fiber (MMF) as the fiber cable type and features a duplex LC optical connector for connectivity..QSFP transceivers enable high-speed 40G/100G Ethernet over multimode fiber using BiDi tech for short-reach data center connectivity..Supports data transfer rates of up to 100,000 Mbps (100 Gbps) and 40,000 Mbps (40 Gbps)..Maximum distance of 100 meters over OM4 or OM5 multimode fiber for 100G Ethernet and 150 meters over OM4 for 40G Ethernet..Supports 40 Gigabit Ethernet (40GbE) and 100 Gigabit Ethernet (100GbE) over multimode fiber using a duplex LC connector..Has a typical power consumption of approximately 3.5 watts..Hot-swappable, allowing it to be inserted or removed from a compatible device without powering down the system..MSA (Multi-Source Agreement) compliant, ensuring interoperability with other QSFP28-compliant devices across various platforms..Operates at two wavelengths: 855 nm and 908 nm, using short-range bidirectional optics over multimode fiber.

The Cisco 100GBASE QSFP (Quad Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 100 Gigabit Ethernet connectivity options for data center, high-performance computing networks, enterprise core and distribution layers, and service provider applications. The QSFP-100G modules are our new generation of 100G transceiver modules solution based on QSFP form factor..With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance.100 Gigabit Ethernet - High bandwidth performance, ease of use and reliable connectivity.With 100GBase-LR4 technology, get up to 100Gbps data transfer rate over optical fiber cable