Equipment Protective Case

The Yellow Eylar SA00001 Standard Waterproof and Shockproof Gear Hard Case with Foam Insert is designed to secure your gear for transport or storage. A crushproof, folding carry handle makes this case easy to transport or store inside of a backpack or other small bag. The equipment case is injection-molded from reinforced, high-pressure polypropylene plastic that is waterproof and crushproof. Its adaptive pressure-equalization valve releases built-up air pressure allowing for atmospheric compensation when transported at high or low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed, applying pressure to a rubber gasket that is molded to the perimeter of the case. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The SA00001 hard equipment case comes with 3 layers of foam designed to keep your valuables firmly in place — 2 fully customizable pull-and-pluck cubed foam layers and 1 layer of egg-crate foam padding for the lid. 2 press-and-pull snap latches secure the full length of the case. 2 padlock-adaptable fittings allow for secure storage at home or on the go. Uniform ridges on the top and bottom create an in-line stackable design for multi-case transport. The outer dimensions are 13.37 in. x 11.62 in. x 6 in. while the inner storage area is 11.81 in. x 8.87 in. x 5.18 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).2 customizable pull and pluck layers, 1 top egg crate layer, and 1 bottom liner padding layer protect your gear.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.0.25-in. padlock hasps allow you to add your own padlock to keep valuables secure.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Edge-to-edge crushproof protection up to 3,000 lbs. of directly dispersed weight.Meets TSA requirements with lockable hasps and fittings.External dimensions: 13.37 in. x 11.62 in. x 6 in..Internal dimensions: 11.81 in. x 8.87 in. x 5.18 in..Limited lifetime warranty.Yellow.WARNING. This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (“DEHP”), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Techprotectus shock absorbent wraparound bumper provides supreme protection against accidental scuffs, drops, falls, scratches and other damage.Water and scratch resistant with anti-fingerprint.4 anti slip pads provide extra force of friction, prevents MacBook from sliding off desk.Two piece snap on design for easy installation.Shock-absorbing TPU Bumpers.The case is for New MacBook Pro 13 inch (Models: M2 A2338 / M1 / A2289 / A2251 / A2159 / A1989 / A1706 / A1708) -- Release in 2022-2016

The Black Eylar SA00006 XL Waterproof and Shockproof Transport Roller Hard Case with Foam Insert is designed to secure your gear for transport or storage. Roller wheels and an extendable handle let you move this rugged equipment case with ease. Its adaptive pressure-equalization valve releases built-up air pressure allowing for atmospheric compensation when transported at high or low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed, applying pressure to a rubber gasket that is molded to the perimeter of the case. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The SA00006 hard equipment roller case comes with 4 layers of foam designed to keep your valuables firmly in place — 1 customizable pull-and-pluck cubed foam layer, 1 solid foam layer, 1 solid bottom pad, and 1 top egg-create layer. 2 press-and-pull snap latches secure the full length of the case..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).4 layers of foam protect your gear—1 customizable pluck-and-pull foam, 1 solid layer foam, 1 solid pad, and 1 top egg-crate foam.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Roller wheels and extendable handle for easy transport.Meets TSA requirements with lockable hasps and fittings.Outer dimensions: 23.75 in. x 20 in. x 11.75 in..Inner storage area: 22.25 in. x 17.25 in. x 10.12 in. (lid included).WARNING. This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (“DEHP”), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

TechProtectus Shockproof laptop briefcase/Messenger Bag/Laptop /MacBook/Notebook/Chromebook Case-11-13 inch.This sleek and versatile briefcase offers advanced protection with its shock-absorbing foam interior and rigid side walls.It is designed to be bump-resistant, drop-resistant, and impact-resistant, ensuring your Chromebooks and laptops stay safe..The anti-slip shoulder strap and durable handles provide convenient carrying options..Stay organized on-the-go with the front zippered pocket and interior compartments.With its rubberized bottom treads and no-fail YKK zippers, this briefcase combines durability and reliability. Choose TechProtectus for a stylish and secure solution for your laptop..Stand Tall and Stay Dry with the rubberized bottom treads keep the briefcase upright and protect your belongings from wet surfaces.

The Eylar SA00007 XXL Waterproof and Shockproof Gear Hard Transport Roller Case with Foam Insert combines heavy-duty protection with the ease of transportation. A tough outer shell allows for shock resistance while a strong seal creates water protection. Inside, there is compartmentalized foam to keep belongings safe and organized. A lockable handle pulls out to carry the box with sturdy wheels. Its air pressure equalizer knob lets you compensate for altitude while traveling. 4 layers of foam keep your valuables securely in place. This protective trolley case is ideal for traveling with heavy and sensitive items such as cameras, laptops, electronics, tools, accessories, and equipment. Clamps on top shut the box while its grooves make it easy to stack. External dimensions are 31.1 in. x 23.42 in. x 14.37 in. while internal dimensions are 28.34 in. x 20.47 in. x 11.02 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).Ideal for cameras, laptops, electronics, tools, and equipment with space for power cables and accessories.4 layers of foam protect your gear—1 customizable pluck-and-pull foam, 1 solid layer foam, 1 solid pad, and 1 top egg-crate foam.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Roller wheels and extendable handle for easy transport.External dimensions: 31.1 in. x 23.42 in. x 14.37 in..Internal dimensions: 28.34 in. x 20.47 in. x 11.02 in..Limited lifetime warranty.WARNING. This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (“DEHP”), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

The Gray Eylar SA00002 Large Waterproof and Shockproof Gear Hard Case with Foam Insert gives extra protection to your contents with 1 customizable pull-and-pluck cubed foam layer, 2 solid foam layers, and 1 layer of egg-crate foam padding. It also makes for safer traveling with its pressure equalizing knob. The hard case comes in a convenient size, making it easy to store inside a backpack or luggage and makes it ideal for storing cameras, electronics, and more. The outer dimensions are 19.78 in. x 15.77 in. x 7.41 in. while the inner storage area is 18.06 in. x 12.89 in. x 6.72 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear; provides waterproof protection for up to 3.2 ft. (1 m) of being fully submerged thanks to its rubber gasket lining.Ideal for standard DSLR camera, lenses, and accessories.2 customizable pull-and-pluck cubed foam layers, 1 egg crate foam layer, and 1 solid foam layer protect your gear.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Meets TSA requirements with lockable hasps and fittings.Stackable design.External dimensions: 19.78 in. x 15.77 in. x 7.41 in..Internal dimensions: 18.06 in. x 12.89 in. x 6.72 in..Limited lifetime warranty.Gray.WARNING. This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (“DEHP”), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Techprotectus shock absorbent wraparound bumper provides supreme protection against accidental scuffs, drops, falls, scratches and other damage..Easy Installation and totally removable, so easy to put on and off.Water and scratch resistant with anti-fingerprint.4 anti slip pads provide extra force of friction, prevents MacBook from sliding off desk.designed for the MacBook Pro 14" 2021 release with Touch ID Model A2442

The Green Eylar SA00001 Standard Waterproof and Shockproof Gear Hard Case with Foam Insert is designed to secure your gear for transport or storage. A crushproof, folding carry handle makes this case easy to transport or store inside of a backpack or other small bag. The equipment case is injection-molded from reinforced, high-pressure polypropylene plastic that is waterproof and crushproof. Its adaptive pressure-equalization valve releases built-up air pressure allowing for atmospheric compensation when transported at high or low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed, applying pressure to a rubber gasket that is molded to the perimeter of the case. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The SA00001 hard equipment case comes with 3 layers of foam designed to keep your valuables firmly in place — 2 fully customizable pull-and-pluck cubed foam layers and 1 layer of egg-crate foam padding for the lid. 2 press-and-pull snap latches secure the full length of the case. 2 padlock-adaptable fittings allow for secure storage at home or on the go. Uniform ridges on the top and bottom create an in-line stackable design for multi-case transport. The outer dimensions are 13.37 in. x 11.62 in. x 6 in. while the inner storage area is 11.81 in. x 8.87 in. x 5.18 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).2 customizable pull and pluck layers, 1 top egg crate layer, and 1 bottom liner padding layer protect your gear.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.0.25-in. padlock hasps allow you to add your own padlock to keep valuables secure.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Edge-to-edge crushproof protection up to 3,000 lbs. of directly dispersed weight.Meets TSA requirements with lockable hasps and fittings.External dimensions: 13.37 in. x 11.62 in. x 6 in..Internal dimensions: 11.81 in. x 8.87 in. x 5.18 in..Limited lifetime warranty.Green.WARNING. This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (“DEHP”), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

The Black Eylar SA00022 Small Waterproof and Shockproof Gear and Camera Hard Case with Foam Insert is ideal for storing cameras, electronics, tools, and more. The pluck-and-pull foam along with its sturdy design will safely store sensitive items during travel or on the go. This case is IP67 waterproof, dustproof, and shockproof. The hard case includes 3 layers of foam—1 egg-crate top liner layer, 1 pull-and-pluck customizable layer, and 1 solid bottom pad layer. An innovative pressure equalization valve allows the case to quickly equalize to different air pressures when traveling from different altitudes. A rubber gasket lines the rim of the case, so when it’s latched closed it creates a waterproof seal. 2 padlock hasps allow this case to be secured with padlocks and meet TSA requirements for transport. The outer dimensions are 10.62 in. x 9.68 in. x 4.87 in. while the inner storage area is 9.25 in. x 7.12 in. x 4.12 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67); rubber gasket lines case’s rim to create a waterproof seal when latched closed.Ideal for cameras, lenses, mobile devices, and small gear.1 customizable pull-and-pluck layer, 1 egg-crate top pad layer, and 1 solid bottom layer pad.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.2 padlock hasps allow you to add your own padlock to keep valuables secure.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Meets TSA requirements with lockable hasps and fittings.External dimensions: 10.62 in. x 9.68 in. x 4.87 in..Internal dimensions: 9.25 in. x 7.12 in. x 4.12 in..Limited lifetime warranty.Black.WARNING. This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (“DEHP”), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Techprotectus shock absorbent wraparound bumper provides supreme protection against accidental scuffs, drops, falls, scratches and other damage.Water and scratch resistant with anti-fingerprint.4 anti slip pads provide extra force of friction, prevents MacBook from sliding off desk.Two piece snap on design for easy installation.Shock-absorbing TPU Bumpers.The case is for New MacBook Air 2021-2018- models M1 A2337 A2179 A1932

i-Blason Armorbox for iPad Mini 4 provides armored protection in a slim profile. Hassle free built in screen protector prevents your screen from scratches and damage without any bubbles. Easily operate buttons with full access to all features. All ports are covered with plugs to prevent build up of dust, and lint..Dual layer protective case with built-in screen protector.Kickstand pops out to create comfortable viewing angles.Polycarbonate hard shell with flexible TPU inner core dual layer protection from drops and scratches.Case provides full access to device ports, functions and sensitivity

The TechProtectus Work-In 15" Vinyl Laptop Case offers shock-absorbing protection in a durable, work-in design. Featuring EVA padding, a clamshell structure, and secure elastic bands, it keeps laptops safe and accessible without needing removal. The built-in accessory pouch provides extra storage, while the padded handles and removable shoulder strap ensure comfortable carrying. Ideal for students, professionals, and travelers, this sleek black case combines functionality and durability for everyday use..Features a clear exterior ID Slot and an accessory pouch for storing items.Can be easily carried with the padded carry handles or the removable shoulder strap.Shock resistant with EVA protective padding.Your laptop is secured by two clips at the top of the clamshell and two elastic bands at the bottom.Fits 13-15" laptops.Techprotectus Laptop work in carrying case design allows you to use your computer without having to remove it from the case.

Protect Your iPad with Defender Series Excellence! Guard your device with a rugged, multi-layer protective case featuring a built-in screen shield, port covers, and a versatile 4-position stand. Enjoy Apple Pencil storage and dual lanyard points for ultimate convenience..A robust Defender Series protective case, designed for reliable protection..Compatible with iPad Air 13-inch (M2) and tested on iPad Air 10th Gen, ensuring a secure fit and superior protection..Constructed with a multi-layer design of polycarbonate and thermoplastic elastomer, in a sleek black color, offering maximum durability and protection..Engineered with precise cutouts for ports, camera, and buttons, ensuring full accessibility and a smooth, secure installation..Includes a built-in screen protector, a 4-position stand for typing, streaming, media viewing, and portrait use, Apple Pencil storage, and two lanyard attach points..Measures 11.80 x 9.31 x 1.05 inches, with a weight of 1.38 lbs. (628.09 g), balancing durability with a manageable form factor..The package includes the Defender Series protective case, providing comprehensive protection for your iPad Air 13-inch (M2)..Features a lifetime limited warranty, ensuring long-term protection and reliability for your device..Tested with a DROP+ rating – twice the durability of MIL-STD-810G standards, offering exceptional resistance to drops, dirt, and impacts.

The Green Eylar SA00010 Waterproof and Shockproof Gear and Camera Hard Case with Foam Insert is designed to secure your gear for transport or storage. The equipment case is injection-molded from reinforced, high-pressure polypropylene plastic that is waterproof and crushproof. Its adaptive pressure-equalization valve releases built-up air pressure allowing for atmospheric compensation when transported at high or low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed, applying pressure to a rubber gasket that is molded to the perimeter of the case. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The SA00010 hard equipment case comes with 3 layers of foam designed to keep your valuables firmly in place — 1 fully customizable pull-and-pluck cubed foam layer, 1 solid layer pad, and 1 layer of egg-crate foam padding for the lid. 2 press-and-pull snap latches secure the full length of the case. 2 padlock-adaptable fittings allow for secure storage at home or on the go. Uniform ridges on the top and bottom create an in-line stackable design for multi-case transport. The outer dimensions are 11.65 in. x 8.35 in. x 3.78 in. while the inner storage area is 10.54 in. x 6.04 in. x 3.16 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).Ideal for cameras, mobile devices, gear, and lenses.1 customizable pull-and-pluck layer, 1 solid layer pad, and 1 egg-crate top pad layer.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.0.25-in. padlock hasps allow you to add your own padlock to keep valuables secure.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Edge-to-edge crushproof protection up to 3,000 lbs. of directly dispersed weight.Meets TSA requirements with lockable fittings.External dimensions: 11.65 in. x 8.35 in. x 3.78 in..Internal dimensions: 10.54 in. x 6.04 in. x 3.16 in..Limited lifetime warranty.Green.WARNING. This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (“DEHP”), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

The Black Eylar SA00034 22-In. Carry-on Travel Roller Waterproof Equipment Hard Case with Foam Insert is designed to secure your equipment for transport or storage. It is sized to fit in standard overhead storage compartments for air travel. It meets TSA’s strict requirements for transport on airplanes in the USA. This case is IP67 waterproof, dustproof, and shockproof and a rubber gasket lines the rim of the case, so when it’s latched closed, it creates a waterproof seal. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The hard case includes 4 layers of foam—1 egg-crate top liner layer, 2 pull-and-pluck customizable layers, and 1 solid bottom pad layer. Press-and-pull snap latches secure the full length of the hard case and 2 padlock-adaptable fittings allow for secure storage at home or on the go. An innovative pressure equalization valve allows the case to quickly equalize to different air pressures when traveling from different altitudes. The outer dimensions are 22 in. x 13.81 in. x 9 in. while the inner storage area is 19.75 in. x 11 in. x 7.6 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67); rubber gasket lines rim of case, to create waterproof seal when latched closed.Ideal for cameras, lenses, electronics, and tools; designed to fit standard overhead airline compartments in the USA; TSA-friendly.4 layers of foam protect your gear-1 top egg-crate foam, 2 customizable pluck-and-pull foam layers, and 1 solid bottom layer of foam.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.2 padlock-adaptable hasps.Roller wheels and extendable handle for easy transport.External dimensions: 22 in. x 13.81 in. x 9 in..Internal dimensions: 19.75 in. x 11 in. x 7.6 in..Limited lifetime warranty.WARNING. This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (“DEHP”), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

iPad (10th gen) protective case with an antimicrobial additive that defends the case exterior against many common bacteria. Its premium rugged design displays clean lines with a comfortable grip while raised edges guard the camera and screen. Port covers block dust and dirt and the stand does double-duty as a touchscreen shield..Lightweight durable cover protects your tablet from scratches, drops, or other types of damage.Compatible with: 10.9" iPad (10th Gen).Made of polycarbonate and synthetic rubber in black.Rugged design displays clean lines with a comfortable grip while raised edges guard the camera and screen.Features DROP+ protection and resists dust, dirt, and scratches.Dimensions: 10.51"H x 7.9"W x 0.99"D; weight: 1 lbs..Meets or exceeds MIL-STD-810G 516.6 standard.Four-position stand great for typing, media, portrait, or streaming.Stand doubles as a touch-screen shield.Lasting antimicrobial case protection.7-year manufacturer limited warranty.Two lanyard attach points.Apple Pencil storage

Equip your teams with the iPad (10th gen) protective case with an antimicrobial additive that defends the case exterior against many common bacteria. Its rugged design displays clean lines while raised edges guard the camera and screen. Port covers block dust and dirt and the stand does double-duty as a touchscreen shield..Lightweight durable cover protects your tablet from scratches, drops, or other types of damage.Compatible with: 10.9" iPad (10th Gen).Made of polycarbonate and synthetic rubber in black.Rugged design displays clean lines while raised edges guard the camera and screen.Features DROP+ protection and resists dust, dirt, and scratches.Dimensions: 10.51"H x 7.9"W x 0.99"D.Meets or exceeds MIL-STD-810G 516.6 standard.Four-position stand great for typing, media, portrait, or streaming.Stand doubles as a touch-screen shield.Lasting antimicrobial case protection.7-year manufacturer limited warranty

The Zebra SG‑ET401‑08EXO‑01 Exoskeleton Rugged Boot Case is the ultimate protection accessory for the Zebra ET401 8‑inch enterprise tablet. Built for demanding environments such as warehousing, logistics, retail, and field service, this rugged boot enhances durability, safeguards against drops, and ensures your tablet remains mission‑ready in any condition..Rugged exoskeleton case for the Zebra ET401 8-inch tablet, providing durable drop protection in tough environments..Durable polycarbonate construction with a black finish, featuring snap‑on installation and precise cutouts for Zebra cradle compatibility..Enhances drop protection up to 5.1 feet, includes hook points for straps or D‑clips, and supports expansion backs without removal..Dimensions are : 9" height × 5.5" width × 0.75" depth..Backed by a 1 year limited warranty.

iPad (10th gen) protective case guards your team's tablets against drops, dirt and scrapes. The streamlined rugged design is made up of a hard internal shell, a soft outer slipcover and a built-in screen protector. Its four-position stand enables comfortable typing and viewing and does double duty as a touchscreen shield..This protective case with slipcover guards against drops, dirt, and scrapes.Compatible with: 10.9" iPad (10th Gen).Made of polycarbonate and synthetic rubber in black.The streamlined rugged design is made up of a hard internal shell, a soft outer slipcover and a built-in screen protector.Features DROP+ protection and resists dust, dirt, and scratches.Dimensions: 10.5"H x 7.9"W x 0.99"D.Meets or exceeds MIL-STD-810G 516.6 standard.Four-position stand great for typing, media, portrait, or streaming.Built-in screen protector.7-year manufacturer limited warranty

The TectProtectus iPad 10.9-inch protective case provides perfect protection for your iPad against accidental drops, scratches, shocks, and dust, helping keep your iPad as beautiful as the day you take it out of the box. Superior Protection-providing perfect protection for your iPad against accidental drops, scratches, shocks and dust.Only fit for 10.9 inch iPad 10th/11th Generation. Model Number:A2757/A2777/A2696/A3355/A3356 (2022,2025 released), Not compatible with any other iPad devices..Full Body Protection with sturdy kickstand: This case is composed of high quality soft TPU and PC linings as well as built-in sturdy kickstand, providing your iPad in full body protection against scratch, impacts and shock during daily use..Functional pop out kickstand allows easy access to your favorite shows, movies, and games while on the go..Built-in Apple Pencil holder-designed with pencil holder, easy to put the Apple Pencil in and out. ( Apple Pencil is NOT included)..Exceed the MIL-STD-810G Military Drop Test..Translucent back allows barcode scanning for easy asset management. It is the best iPad protective case for students and K12 schools 1:1 program.Built-in screen protector prevents scratches without compromising sensitivity

iPad (10th gen) protective case guards against drops, dirt and scrapes. The streamlined rugged design is made up of a hard internal shell, a soft outer slipcover and a built-in screen protector. Its four-position stand enables comfortable typing and viewing and does double duty as a touchscreen shield..This protective case with slipcover guards against drops, dirt, and scrapes.Compatible with: 10.9" iPad (10th Gen).Made of polycarbonate and synthetic rubber in black.The streamlined rugged design is made up of a hard internal shell, a soft outer slipcover and a built-in screen protector.Features DROP+ protection and resists dust, dirt, and scratches.Dimensions: 10.51"H x 7.9"W x 0.99"D; weight: 1 lbs..Meets or exceeds MIL-STD-810G 516.6 standard.Four-position stand great for typing, media, portrait, or streaming.7-year manufacturer limited warranty

This TechProtectus ShockProof laptop case is custom-fit for compatibility with Lenovo 100e/100w Gen 4 11.6" Chromebooks. Since day one, TechProtectus has been focusing on designing and offering the best-value protection solution to K-12 customers and business corporations. In the education market, they provide supreme-quality product lines that meet K-12 students' and teachers' needs in school and remote learning environments. From MacBook cases, Chromebook cases, and iPad cases, to headphones, and backpacks, they provide the most affordable and durable protection solutions nationwide..Custom-fit hardshell laptop case features an inner layer of shock-absorbing TPU cushions, while an outer layer of tough TPE resists scratches, dirt, and oils.Accommodates laptops with 11.6" screens.Compatible with Lenovo 100e/100w Gen 4 11.6" Chromebooks.Dual-layer bumpers are engineered for maximum protection.Reinforced air cell corners flex to provide unparalleled shock absorption, protecting the device from accidental drops and bumps.Rigid top and bottom panels are designed to resist scratches and withstand impact damage, ensuring longevity in demanding educational environments.Transparent top and bottom panels facilitate effortless asset tagging and device management, simplifying administrative tasks for schools.Special TPU clips provide users with comfortable typing position.Drop-tested to protect against falls up to 6'.1-year manufacturer limited warranty

This TechProtectus ShockProof laptop case is custom-fit for compatibility with Dell 3110 11.6" two-in-one Chromebooks. The clips along the screen are made of TPU material, which does not pull on the screen and won't break easily. Since day one, TechProtectus has been focusing on designing and offering the best-value protection solution to K-12 customers and business corporations. In the education market, they provide supreme-quality product lines that meet K-12 students' and teachers' needs in school and remote learning environments. From MacBook cases, Chromebook cases, and iPad cases, to headphones, and backpacks, they provide the most affordable and durable protection solutions nationwide..Custom-fit hardshell laptop case features edges made of TPU rubber and rigid polycarbonate casing for durable drop protection.Accommodates laptops with 11.6" screens.Compatible with Dell 3110 11.6" two-in-one Chromebooks.Dual-layer bumpers are engineered for maximum protection.Transparent top and bottom for easy asset tagging and management.Reinforced air cell corners flex to offer maximum shock absorption.Reduced weight without sacrificing strength and durability.Provides an improved overall ventilation and heat dissipation.Works in most charging carts and is great for take-home device programs.Easy snap-on installation.Cutout sections for easy access to all ports, including the battery check button, USB Type-C, charging ports, and more.Plug in a charger, cable, or headset without removing the case.Drop-tested to protect against falls up to 6', exceeding the MIL-STD-810 standard.1-year manufacturer limited warranty

Protect student Chromebooks 24/7 with the slim and budget-friendly Explorer Slim Work-In case. Designed for lightweight carrying and always-on protection, this sleek case offers a perfect balance of functionality and affordability, with a handy elastic pocket that stretches to accommodate accessories and lays flat when not in use, maintaining the slim profile. Durable carry handles provide a secure grip while the optional MAXCases Universal Shoulder Strap adds hands-free carry options. The molded interior honeycomb pattern provides airflow to keep devices cool. Perfectly sized to accommodate virtually any 14-inch Chromebook/laptop..This laptop bag have following features Laptop Bag Style : Sleeve , Screen Size: 14 inches, Main Compartment Closure Type: Zipper. Designed for lightweight carrying and always-on protection, perfect for Chromebooks and laptops.Material used in this bag is Ballistic nylon exterior with padded, soft-touch lining. Pattern is Solid and Color of this bag is Black..Has the following dimensions: Height: 12 inches Width: 10 inches Depth: 2 inches.It posses a practical and versatile strap and handle it has ergonomic top handles for easy carrying. it includes a shoulder strap. The shoulder strap is adjustable and removable, providing flexibility for different carrying preferences..Designed with advanced materials and sealed seams to ensure complete protection against water ingress, keeping your belongings dry in any environment with its water proof technology..contains two compartments: Main Compartment: The primary storage area with a zipper closure, designed to hold your laptop or device. Front Pocket: An additional pocket with interior compartments for accessories, secured with a zipper..It is TSA checkpoint friendly..Comes with a limited lifetime warranty.

Get complete iPad protection with CODi’s Rugged Case and Tempered Glass Screen Protector bundle - designed to keep your device safe from every angle. The Rugged Case features a 3-part design with thick silicone bumpers, an integrated rotating kickstand, and a detachable shoulder strap for secure on-the-go use. Certified against drops and fluid contamination, it’s built to withstand daily challenges while offering both portrait and landscape viewing. Paired with CODi’s 9H-rated Tempered Glass Screen Protector, you’ll enjoy HD clarity, extreme touch sensitivity, and resistance to scratches, smudges, and impacts. Together, this bundle delivers military-grade durability and crystal-clear screen defense without sacrificing functionality or ease of use..Rugged Case features a 3-part design with 360° protection against drops, impacts, and spills.Adjustable silicone hand strap and detachable shoulder strap for versatile, hands-free carrying.Thick corner bumpers add enhanced screen protection during drops.Tempered Glass Screen Protector delivers 9H surface hardness for superior scratch and impact resistance.Oleophobic coating resists fingerprints and smudges for a clear, pristine display.Ultra-thin 0.4mm glass preserves HD clarity and extreme touch sensitivity.Bundle gives total protection - rugged case for the exterior, tempered glass for the display.All-in-one rugged protection and crystal-clear screen defense for your iPad Pro (M4/M5).

Techprotectus hard shell cover comes with keyboard cover to provide full protection all around.ONLY Compatible with New MacBook Macbook Air 13.6 inch M2/M3/M4 Chip 2022-2025 Release with Liquid Retina Display With Touch ID. (Model A2681&A3240).This Case Design with Full Access to All Features (earbuds, charger, usb adapter, usb c hub).It comes with an extra keyboard cover FOR FREE.Injection molded construction also features thorough ventilation to avoid overheating and rubberized feet to keep MacBook firmly in place..Waterproof and dustproof, environmentally protective and ideal for resistance against your keyboard against everyday spills

Designed for K12 students & teachers, this rugged folio case offers enhanced edge and corner protection and an upgraded magnetic smart cover that easily converts into a sturdy stand. Perfect for school use, with a clear back for asset tags, a secure stylus holder, and wipeable, durable material for daily protection. Enhanced Protective Folio Design: Engineered for durability, this TechProtectus rugged folio case features shock-absorbing edges, air-cushioned corners, and reinforced bumpers to guard against drops, scratches, and daily wear, ensuring your iPad is safe in even the most active school settings..Specially designed for iPad 10th/11th generation 10.9-inch 2022,2025 (Model: A2696, A2757, A2777/A3344/A3356).Durable, Wipeable Surface for School Use: The smooth, non-porous cover is easy to clean, ideal for maintaining hygiene in shared environments like classrooms and libraries..Dedicated Stylus Holder: An elastic loop securely holds an Apple Pencil or other stylus, ensuring it's always close at hand, with the flexibility to remove as needed..Clear Back Panel for Asset Tag Visibility: The transparent back panel makes it easy to identify school-issued devices, keeping them organized and trackable..Military-Grade Drop Protection: Tested to meet MIL-STD 810G-516.6 standards, this case provides dependable protection against the rigors of school use.TechProtectus MagStand Rugged Folio Case for iPad 10.9'' (Gen 10th/11th)

The Pelican ™ black polypropylene small rugged case measuring 11.62" x 13.37" x 6", has an open cell core with solid wall design to ensure long lasting durability. The O-ring seal of this case blocks out all the dust and water entering into the case. It has automatic pressure equalization valve that balances the pressure built inside the case. The rubber over-molded handles of this case ensures easy portability. It features stainless steel hardware for durability..Comes in black color and has ABS latch/purge body, polymer o-ring, stainless steel pins, 3 micron hydrophobic non-woven purge vent.Dimensions: 11.62"H x 13.37"W x 6"D.Rubber over-molded handle for comfort.Compartments size: 8.87"H x 11.81"W x 5.18"D interior, 4" bottom depth, 5.18" total depth, 0.31 sq ft internal volume.Closure type: Double throw latch.Lid depth: 1.18", Temperature: - 40 to 210 deg F, Buoyancy: 20.06 lbs..Watertight design offers immense resistance to crush, dustproof while o-ring seal provides superior shielding.Has open cell core with solid wall design for strong protection and automatic pressure equalization valve for balancing interior pressure.Pick N Pluck ™ with convoluted lid foam for added safety organization of your contents.Meets IP67, MIL C-4150J, STANAG 4280, Def Stan 81-41 and ATA 300 certifications or standards.Weight: 4.41 lbs. with foam, 3.97 lbs. without foam.Meets IP67, DEF STAN 81-41/STANAG 4280 standards.Weighs up to 4.4 lbs with foam and 4 lbs without foam.Comes with lifetime guarantee of excellence.Pelican™ Hard carrying case with foam in black color provides ultimate protection to any kind of equipments. Features polymer O-ring seal that ensures optimum water resistant.

Pelican™ 1550 Hard Case with foam black comes with ultra-high impact polycarbonate shell and double-throw latches..Material: Polycarbonate.Dimensions: Exterior: 8.12"(H) x 16.87"(W) x 20.62"(L), interior: 7.62"(H) x 14.00"(W) x 18.43"(L).Accessibility: Clamshell.Ultra high impact polycarbonate shell.Open cell core with solid wall design.Double-throw latches.Polymer o-ring waterproof seal.Large fold down handle.Two padlockable hasps.Automatic pressure equalization valve.Stainless steel hardware.Chemical-resistant, corrosion-resistant, airtight, watertight, dustproof, crushproof.Lid depth: 1 3/4".Bottom depth: 5.87".2 level pick 'N' pluck with convoluted lid foam.Includes: Pelican 1550 case, 1553 O-ring, 1551 pick 'N' pluck foam.Certificates: IP67, DEF STAN 81-41/STANAG 4280, ATA 300.1555 padded divider set, 1553 O-ring, 1551 pick 'N' pluck foam.Lifetime limited warranty.Lifetime limited warranty.Pelican™ 1550 Hard Case with foam black comes with ultra-high impact polycarbonate shell and double-throw latches.

The Air Protect Always-On Case has a durable exterior that protects laptops and Chromebooks from heavy wear and tear, making it perfect for classrooms. Shock-absorbing stiffeners and padding on all six sides safeguard the device against accidental damage from drops and dings. The Air Protect Always-On Slim Case has been designed to allow laptops or Chromebooks to be used while in the protective case. Simply unzip to activate the device and obtain full access to the screen and ports. A molded elevated base delivers ventilation to help prevent overheating, even after hours of use. Micro-gel and screen clips hold the Chromebook securely in place, while allowing students to position the screen at multiple angles. Use the integrated carrying handle or slip the lightweight case inside a backpack for easy portability. A convenient bottom pocket, separate from the laptop compartment, safely stores a charger and other accessories without damaging the device..Fits most 11-inch laptops and Chromebooks up to 12.2" x 8.75" x 1.1".One-zip auto-wake design.Slim and compact.Durable, six-sided protection from drops.Device can be used while in case.Multiple screen positioning anglers.Screen mount clips securely hold device without covering display.Integrated handle for portability.Full port access when open

Techprotectus hard shell cover comes with keyboard cover to provide full protection all around.ONLY Compatible with New MacBook Macbook Air 13.6 inch M2/M3/M4 Chip 2022-2025 Release with Liquid Retina Display With Touch ID. (Model A2681&A3240).This Case Design with Full Access to All Features (earbuds, charger, usb adapter, usb c hub).It comes with an extra keyboard cover FOR FREE.Injection molded construction also features thorough ventilation to avoid overheating and rubberized feet to keep MacBook firmly in place..Waterproof and dustproof, environmentally protective and ideal for resistance against your keyboard against everyday spills

This TechProtectus ShockProof laptop case is custom-fit for compatibility with HP G8 EE 11.6" Clamshell Chromebooks. Since day one, TechProtectus has been focusing on designing and offering the best-value protection solution to K-12 customers and business corporations. In the education market, they provide supreme-quality product lines that meet K-12 students' and teachers' needs in school and remote learning environments. From MacBook cases, Chromebook cases, and iPad cases, to headphones, and backpacks, they provide the most affordable and durable protection solutions nationwide..Custom-fit hardshell laptop case features edges made of TPU rubber and rigid polycarbonate casing for durable drop protection.Accommodates laptops with 11.6" screens.Compatible with HP G8 EE 11.6" Clamshell Chromebooks.Overhang top adds screen corner protection when the device is closed.Transparent top and bottom for easy asset tagging and management.Low-profile rubberized feet encourage the optimal typing experience while keeping the device from sliding on smooth surfaces.Works in most charging carts and is great for take-home device programs.Advanced design enables fast, easy installation.Reinforced air cell corners flex to offer maximum shock absorption, making the case protective but not bulky.Slide-on top panel evenly disperses pressure around the perimeter of the screen, while the custom fit supports allows access to all ports and device functions.Resists scratches, dirt, and oils.Drop-tested to protect against falls up to 4' and meets the MIL-STD-810 standard.1-year manufacturer limited warranty

The MAXCases Explorer Bag Slim 11" (MCEBS11BLK) is a sleek, lightweight, and durable laptop sleeve designed for 11-inch devices. It combines a cover and carrying case for always-on protection, ensuring your laptop stays safe from drops, scratches, and dirt. The ballistic nylon exterior provides weather-resistant durability, while the padded, soft-touch lining adds extra protection. A handy elastic pocket stretches to accommodate accessories and lays flat when not in use, maintaining the slim profile1. It also features ergonomic top handles for comfortable carrying and an optional, removable shoulder strap for hands-free convenience.Laptop Bag Style is Sleeve and it can have Screen Size: Up to 11.9 inches with Main Compartment Closure Type is Zipper. This Bag Protects and transports laptops and devices up to 11.9 inches.Material use in this bag is Ballistic nylon exterior with padded, soft-touch lining. Pattern used is Solid and the Color is Black.Has the following dimensions: Height: 12 inches Width: 9 inches Depth: 2 inches.It Posses a practical and versatile strap and handle it has ergonomic top handles for easy carrying. it includes a shoulder strap. The shoulder strap is adjustable and also removable, providing flexibility for different carrying preferences..Built to withstand splashes, spills, and light rain, ensuring reliable performance in wet conditions with its water-resistant Technology..It contains two compartments: Main Compartment: The primary storage area with a zipper closure, designed to hold your laptop or device. Front Pocket: An additional pocket with interior compartments for accessories, secured with a zipper..It is TSA checkpoint friendly..Comes with a limited lifetime warranty

High-Quality Material-Premium Neoprene material offers an ultra-slim lightweight design and superior protection to protect laptop/Chromebook/tablet from dust, bumps, scratches, scuffs, and spills. Fit for 9.7-12 inch Tablets/Chromebooks. Can be used as a bag or sleeve so you're covered any way you use it..Inside plush provides better protection compared to other regular laptop sleeves..Full of Features - The zippered front pocket is a perfect pocket holds charger and other small accessories..Hideaway handles convert this from a bag to a sleeve..Convertible Design - This case can be used three ways. As an over-the-shoulder bag, handbag or a laptop/tablet sleeve..Built-in ID Card Holder included

Defender Series Pro is the rugged protective iPad Pro (12.9") case that delivers advanced defense for business on the go. Defender Series Pro integrates a silver-based antimicrobial additive into the case that helps inhibit microbial growth and defends the case exterior against many common bacteria. Weaving the additive into the case materials ensures it keeps protecting your case 24/7/365 and outlasts heavy use. The premium rugged design displays clean lines with a comfortable grip. Plus, the raised edge offers added camera and screen defense..Lightweight durable rugged protective case protects your tablet from scratches, drops, or other types of damage.Compatible with iPad Pro 12.9" (6th and 5th Gen).Comes in black; polycarbonate shell, synthetic rubber slipcover, polycarbonate shield stand.Lasting antimicrobial technology helps protect case exterior against many common bacteria.Dimensions: 11.89"H x 9.29"W x 1.08"D.Meets or exceeds MIL-STD-810G 516.6 standard.Case is infused with silver-based additive that continually blocks microbial growth.Premium rugged design with a comfortable grip, raised edge protects camera and screen.Port covers block dirt, dust, and lint from getting into jacks and ports.Shield stand works as a hands-free multi-position stand and screen cover.DROP+ 2x as many drops as military standard (MIL-STD-810G 516.6)

The TechProtectus shockproof vertical case consists of a semihard EVA shell and anti-scratch polyester to help protect your laptop or tablet from external shock, scratches, dust, and bumps. Fits 9.7"-12" tablets/Chromebooks..Shockproof vertical laptop sleeve made up of a semihard EVA shell and anti-scratch polyester helps protect your laptop/tablet from external shock, scratches, dust, and bumps.Fits 9.7"-12" tablets and Chromebooks.Equipped with durable YKK zippers for secure and long-lasting usage.Quick top-grab carry handle and padded, detachable shoulder strap.1600D high-density polyester provides better water repellence and wear resistance than regular nylon.Equipped with 0.2" thick foam paddings, the case provides your computer/tablet with 360-degree all-around protection.Built-in ID cardholder included for easy identification.Vertical design protects your device from unwanted debris while maintaining easy access.1-year manufacturer limited warranty

This TechProtectus ShockProof laptop case is custom-fit for compatibility with HP G9 EE 11.6" Clamshell Chromebooks. Since day one, TechProtectus has been focusing on designing and offering reliable protection solutions to K-12 customers and business corporations. In the education market, they provide product lines of outstanding quality to meet K-12 students' and teachers' needs in school and remote learning environments. From MacBook cases, Chromebook cases, and iPad cases to headphones and backpacks, TechProtectus provides affordable and durable protection solutions nationwide..Custom-fit hardshell laptop case features edges made of TPU rubber and rigid polycarbonate casing for durable drop protection.Accommodates laptops with 11.6" screens.Compatible with HP G9 EE 11.6" Clamshell Chromebooks.Overhang top adds screen corner protection when the device is closed.Transparent top and bottom for easy asset tagging and management.Low-profile rubberized feet encourage the optimal typing experience while keeping the device from sliding on smooth surfaces.Works in most charging carts and is great for take-home device programs.Advanced design enables fast, easy installation.Reinforced air cell corners flex to offer maximum shock absorption, making the case protective but not bulky.Slide-on top panel evenly disperses pressure around the perimeter of the screen, while the custom fit allows access to all ports and functions of the device.Resists scratches, dirt, and oils.Drop-tested to protect against falls up to 4' and meets the MIL-STD-810 standard.1-year manufacturer limited warranty

Custom-fit for the Lenovo 300e/300w Gen 4 11.6" Chromebook, the TechProtectus ShockProof laptop case is purpose-built to safeguard devices commonly used in K-12 educational settings. Since day one, TechProtectus has been focusing on designing and offering the best-value protection solution to K-12 customers and business corporations. In the education market, they provide supreme-quality product lines that meet K-12 students' and teachers' needs in school and remote learning environments. From MacBook cases, Chromebook cases, and iPad cases, to headphones, and backpacks, they provide the most affordable and durable protection solutions nationwide..Custom-fit hardshell laptop case features an inner layer of shock-absorbing TPU cushions, while an outer layer of tough TPE resists scratches, dirt, and oils.Accommodates laptops with 11.6" screens.Compatibility with Lenovo 11.6" 300e/300w Gen 4 Chromebooks.Dual-layer bumpers are engineered for maximum protection.Reinforced air cell corners flex to provide unparalleled shock absorption, protecting the device from accidental drops and bumps.Rigid top and bottom panels are designed to resist scratches and withstand impact damage, ensuring longevity in demanding educational environments.Transparent top and bottom panels facilitate effortless asset tagging and device management, simplifying administrative tasks for schools.Special TPU clips provide users with comfortable typing position.Drop-tested to protect against falls up to 6'.1-year manufacturer limited warranty

Get complete iPad protection with CODi’s Rugged Case and Tempered Glass Screen Protector bundle - designed to keep your device safe from every angle. The Rugged Case features a 3-part design with thick silicone bumpers, an integrated rotating kickstand, and a detachable shoulder strap for secure on-the-go use. Certified against drops and fluid contamination, it’s built to withstand daily challenges while offering both portrait and landscape viewing. Paired with CODi’s 9H-rated Tempered Glass Screen Protector, you’ll enjoy HD clarity, extreme touch sensitivity, and resistance to scratches, smudges, and impacts. Together, this bundle delivers military-grade durability and crystal-clear screen defense without sacrificing functionality or ease of use..Rugged Case features a 3-part design with 360° protection against drops, impacts, and spills.Adjustable silicone hand strap and detachable shoulder strap for versatile, hands-free carrying.Thick corner bumpers add enhanced screen protection during drops.Tempered Glass Screen Protector delivers 9H surface hardness for superior scratch and impact resistance.Oleophobic coating resists fingerprints and smudges for a clear, pristine display.Ultra-thin 0.4mm glass preserves HD clarity and extreme touch sensitivity.Bundle gives total protection - rugged case for the exterior, tempered glass for the display.All-in-one rugged protection and crystal-clear screen defense for your iPad Pro 11" (M4, M5).

This TechProtectus ShockProof laptop case is custom-fit for compatibility with Lenovo 500e/500w Gen 3 11.6" Chromebooks. Since day one, TechProtectus has been focusing on designing and offering the best-value protection solution to K-12 customers and business corporations. In the education market, they provide supreme-quality product lines that meet K-12 students' and teachers' needs in school and remote learning environments. From MacBook cases, Chromebook cases, and iPad cases, to headphones, and backpacks, they provide the most affordable and durable protection solutions nationwide..Custom-fit hardshell laptop case features edges made of TPU rubber and rigid polycarbonate casing for durable drop protection.Accommodates laptops with 11.6" screens.Compatible with Lenovo 500e/500w Gen 3 Chromebooks.Features an enhanced overlap top corners protection with reduced overall weight.Transparent top and bottom for easy asset tagging and management.Low-profile rubberized feet encourage the optimal typing experience while keeping the device from sliding on smooth surfaces.Works in most charging carts and is great for take-home device programs.Advanced design enables fast, easy installation and full 2:1 360-degree convertibility.Provides an improved overall ventilation and heat dissipation.Allows full access to all ports.Resists scratches, dirt, and oils.Drop-tested to protect against falls up to 4' and meets the MIL-STD-810 standard.1-year manufacturer limited warranty

Give your classroom devices the protection they deserve with the TechProtectus Lenovo 14e Gen3 Chromebook Case — a purpose‑built, rugged solution engineered for the demands of K‑12 environments. Designed with dual‑layer bumpers, a shock‑absorbing TPU interior, and a tough TPE exterior, this case shields the Lenovo 14e Gen3 Chromebook from drops, scratches, bumps, dirt, and everyday wear. Reinforced air‑cell corners deliver enhanced impact absorption, while rigid top and bottom panels defend against scratches and structural damage. The lightweight, clear design also features transparent panels, making asset tagging, barcode scanning, and school device management effortless. Perfect for student use, 1:1 device programs, or high‑traffic classroom environments, this case ensures long‑lasting durability while maintaining full visibility of school IDs, labels, and device branding..Custom‑Fit for Lenovo 14e Gen 3 — Precisely engineered for a perfect fit, making it ideal for K‑12 classrooms and educational device programs..Dual‑Layer Protection — Inner TPU layer absorbs shocks while the tough TPE outer shell resists scratches, dirt, and oils for maximum durability..Reinforced Air‑Cell Corners — Flex and absorb impact from accidental drops, offering superior edge and corner protection..Scratch‑Resistant Hard Shell — Rigid top and bottom panels help prevent damage from bumps, scrapes, and heavy daily use..Transparent Panels for Easy Asset Tagging — Clear design allows quick identification, asset tracking, and barcode scanning—perfect for school inventory systems..Lightweight, School‑Friendly Construction — Built to withstand classroom environments without adding bulk to student backpacks..Designed for Education Environments — Optimized for 1:1 programs, testing environments, and frequent device handling..Tailored for K-12 Devices: Custom-fit for the Lenovo 14e Chromebook Gen3, the TechProtectus case is purpose-built to safeguard devices commonly used in K-12 educational settings.

This TechProtectus ShockProof laptop case is custom-fit for compatibility with Lenovo 500e/500w Gen 4 11.6" Chromebooks. Since day one, TechProtectus has been focusing on designing and offering the best-value protection solution to K-12 customers and business corporations. In the education market, they provide supreme-quality product lines that meet K-12 students' and teachers' needs in school and remote learning environments. From MacBook cases, Chromebook cases, and iPad cases, to headphones, and backpacks, they provide the most affordable and durable protection solutions nationwide..Custom-fit hardshell laptop case features an inner layer of shock-absorbing TPU cushions, while an outer layer of tough TPE resists scratches, dirt, and oils.Accommodates laptops with 11.6" screens.Compatible with Lenovo 500e/500w Gen 4 11.6" Chromebooks.Dual-layer bumpers are engineered for maximum protection.Reinforced air cell corners flex to provide unparalleled shock absorption, protecting the device from accidental drops and bumps.The rigid top and bottom panels are designed to resist scratches and withstand impact damage, ensuring longevity in demanding educational environments.Transparent top and bottom panels facilitate effortless asset tagging and device management, simplifying administrative tasks for schools.Special TPU clips provide users with comfortable typing position.Drop-tested to protect against falls up to 6'.1-year manufacturer limited warranty

Designed for K12 students & teachers, this rugged folio case offers enhanced edge and corner protection and an upgraded magnetic smart cover that easily converts into a sturdy stand. Perfect for school use, with a clear back for asset tags, a secure stylus holder, and wipeable, durable material for daily protection. Enhanced Protective Folio Design: Engineered for durability, this TechProtectus rugged folio case features shock-absorbing edges, air-cushioned corners, and reinforced bumpers to guard against drops, scratches, and daily wear, ensuring your iPad is safe in even the most active school settings..Specifically designed for iPad 9th Generation 2021 (A2602/A2603/A2604/A2605), iPad 8th Generation 2020 (A2270/A2428/A2429/A2430), iPad 7th Generation 2019 (Model Number: A2197/A2200/A2198) 10.2" Tablet..Durable, Wipeable Surface for School Use: The smooth, non-porous cover is easy to clean, ideal for maintaining hygiene in shared environments like classrooms and libraries..Dedicated Stylus Holder: An elastic loop securely holds an Apple Pencil or other stylus, ensuring it's always close at hand, with the flexibility to remove as needed..Clear Back Panel for Asset Tag Visibility: The transparent back panel makes it easy to identify school-issued devices, keeping them organized and trackable..Full Access to Device Functions: Precise cutouts allow access to the microphone, speakers, and charging port, ensuring complete usability without needing to remove the case..TechProtectus MagStand Rugged Folio Case for iPad 10.2" (Gen 7/8/9)

The Cases Logic Invigo Eco laptop attaché is made of recycled materials, with padded storage for your tablet and laptop, and thoughtful features for ease in your everyday. This bag is made with a 100% recycled 600D polyester exterior, 150D polyester lining, meshes, PP webbing, and 86% recycled YKK zipper tape. The water-repellent coating is also free from PFCs, chemicals that are harmful to the environment..Padded laptop pocket protects a 15.6'' laptop and tablet sleeve holds a 12.9'' tablet.Interior organization pockets and key storage in front zip pocket.Pocket on back panel keeps vital items like passport or wallet hidden yet close at hand.Main zippers are covered by a flap of fabric for extra weather protection.Luggage pass-through strap allows you to attach the bag to rolling luggage for effortless travel.Shoulder strap and bale handles padded with soft, breathable air mesh.Long-lasting metal hardware, logo, and YKK zippers.Thule Group is committed to sourcing 100% of Packs, Bags, and Luggage recycled polyester textiles and recycled nylon textiles from Global Recycled Standard certified sources by the end of 2024

Techprotectus hard shell cover comes with keyboard cover to provide full protection all around..Only compatible with the new 2023 M2 Chip MacBook Air 15 inch (Model: A2941) with Liquid Retina Display & Touch ID & MagSafe Charging Port..Using sturdy lightweight plastic, and injection-molded construction for a precise fit with added fashion, the TechProtectus MacBook Air 15'' hardshell case protects your new MacBook from scratches and dings..It comes with an extra keyboard cover for FREE.Waterproof and dustproof, environmentally protective and ideal for resistance against your keyboard against everyday spills.Easy to put on and take off that can protect your MacBook from scrapes and scratches.

This case is designed to protect your RAID system and accessories when moving to a different location. The injection-molded case is made of HPX resin, which is virtually unbreakable as well as dent- and shatter-resistant, and is lightweight, airtight, and watertight. Aside from protection, the case sports a retractable, telescoping handle as well as rugged in-line wheels to help you get to your destination. For comfort, the handle features a double-layered, soft-grip design. Each of the four Press & Pull latches opens with a push of a button but stays secure under impact or stress. To automatically adjust air pressure without letting in water, a permanently attached Vortex valve is on board. In addition, molded-in hasps support standard-sized padlocks for security..Protective travel case designed to safeguard and transport the G-SPEED Shuttle XL storage system during shipping or travel.Specifically engineered for G-Technology G-SPEED Shuttle XL with custom foam insert for Evolution Series drive modules.High-strength HPX resin shell with durable custom foam interior for maximum protection.Available in Black color.1 Protective Case with custom foam insert.Custom foam insert designed to cradle the G-SPEED Shuttle XL and two Evolution Series drive modules.Integrated compartment for storing power and interface cables.Equipped with Press & Pull latches for secure closure and easy opening.Features in-line wheels and a telescoping handle for convenient transport.Watertight, crushproof, and dustproof design with automatic Vortex valve for pressure equalization.Two padlockable hasps for added security.Backed by Pelican’s Limited Lifetime Warranty.The G-Technology G-SPEED Shuttle XL iM2720 Protective Case is a Pelican iM2720 Storm case that comes with a custom foam insert, which holds your G-SPEED Shuttle XL RAID array system, cords, and two Evolution series drives.

Meet the protective case built to safeguard your iPhone 16 and enhance your everyday experience. Engineered to exceed MIL-STD-810H military-grade standards, it offers reinforced protection, giving you the confidence to take your iPhone anywhere, no matter the conditions. But this case is more than just tough; it's designed for ultimate convenience. With MagSafe compatibility and dual corner openings for lanyards or straps, you'll have the freedom to carry your iPhone securely, minimizing the chance of accidental drops..Rugged Protective Case, Compatible with iPhone 16.MagSafe Certified for Seamless Magnetic Attachment.Material: Durable Polycarbonate and TPU; True Color: Black.Designed for Protection Against Water Damage, Shockproof for Impact Resistance.Built-In MagSafe Compatibility for Easy Accessory Attachment.Wireless Charging Compatible with MagSafe and Qi Chargers.Selling Quantity 1 Unit.Limited Warranty.Textured edges for extra grip.Charging Port cover.Capture Button opening

Handle any project with OtterBox Defender Series, the protective iPhone SE (3rd and 2nd gen) and iPhone 8/7 case that delivers legendary defense. Its multi-layer construction guards phones against serious drops, dirt, scrapes and bumps. Plus, the included holster doubles as a belt clip or hands-free kickstand..Rugged case offers protection to your Apple iPhone 7 and 8 that securely encases the corners and back.Comes in black and features polycarbonate and synthetic rubber construction for added durability.Triple-layer defense: inner shell, outer slipcover and touchscreen protector.Screen protection: built in to keep your brilliant display flawless.Drop-proof and dust-resistant design for added protection.Port covers: stop dirt, dust and lint from getting into jacks and ports.Holster: works as a belt clip and a hands-free kickstand.Case is fully scratch-resistant, prevents unsightly scrapes, and discoloration.Compatibility: iPhone SE (3rd gen), iPhone SE (2nd gen), iPhone 8, iPhone 7.Dimensions: 5.91" x 3.12" x 0.57" (150.11 mm x 79.25 mm x 14.48 mm).Materials: Polycarbonate shell, Synthetic rubber slipcover, Clear membrane screen protector, Polycarbonate holster.Lifetime manufacturer limited warranty.Protect your phone against drops, dust, and scratches with this OtterBox Defender Series rugged case for iPhone 7 and 8.