Routers and Access Points

The Cisco Catalyst access points are the next generation of enterprise access points. They are resilient, secure, and intelligent. We are more dependent on our wireless networks than ever before. Additional devices connect to the network every year, and the Cisco Catalyst access points will provide a seamless experience anywhere for everyone. Going beyond the Wi-Fi 6 (802.11ax) standard, the access point provides integrated security, resiliency, and operational flexibility as well as increased network intelligence. Extending intent-based network and perfect for networks of all sizes, the Cisco Catalyst scales to the growing demands of IoT while fully supporting the latest innovations and new technologies and is a leader in performance, security, and analytics. The Cisco Catalyst access points, paired with Cisco DNA, are enterprise-class products that will address your current and future needs. These access points are the first step in updating your network so that you can take better advantage of all of the features and benefits that Wi-Fi 6 provides..Access point for indoor environments, with internal antennas provides a seamless experience anywhere for everyone.Dimensions: 8.5"H x 8.5"W x 1.7"D.Comes in white.Wi-Fi 6 (802.11ax) delivers a better experience in typical environments with more predictable performance for advanced applications such as 4K or 8K video, high-density, high-definition collaboration apps, all-wireless offices, and IoT.Features software-defined radio (SDR) that can perform advanced RF spectrum analysis and delivers other features, such as Cisco CleanAir, wireless intrusion prevention system (wIPS), and DFS detection.Orthogonal frequency-division multiple access (OFDMA) based scheduling splits the bandwidth into smaller chunks called resource units (RUs), which can be allocated to individual clients in both the downlink and uplink directions to reduce overhead and latency.Supporting four spatial streams, multi-user, multiple-input, multiple-output (MU-MIMO) enables access points to split spatial streams between client devices, to maximize throughput.Spatial reuse allows the access points and their clients to differentiate between BSSs, thus permitting more simultaneous transmissions.Target wake time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the access point.Intelligent Capture probes the network and provides Cisco DNA Center with deep analysis.Flexible radio assignment allows the access points to intelligently determine the operating mode of serving radios based on the RF environment.Dual 5GHz radio support enables both radios to operate in 5GHz client serving mode, allowing industry-leading 5.2Gbps (2 x 2.6Gbps) over-the-air speeds while increasing client capacity.Application hosting helps future-proof and simplify IoT deployments by eliminating the need to install and manage overlay networks.Provides uplink speeds of 2.5Gbps, in addition to 100Mbps and 1Gbps.Features Integrated Bluetooth Low Energy (BLE) 5 radio to enable IoT use cases such as location tracking and wayfinding.Enables edge computing capabilities for IoT applications on the host access point.Creates an optimal mobile experience for iOS devices on corporate networks based on Cisco technologies.Lifetime manufacturer limited warranty

The Cisco Catalyst 9115 series with Wi-Fi 6 is the next generation of enterprise access points. They are resilient, secure, and intelligent. The Catalyst 9115 series access points, paired with the Cisco Digital Network Architecture (Cisco DNA), are enterprise-class products that will address both your current and future needs. They are the first step in updating your network to take better advantage of all of the features and benefits that Wi-Fi 6 provides. With the Catalyst 9115 series, you can secure remote workers or the micro-office. Any Cisco Aironet or Catalyst access point can function as an OfficeExtend access point (OEAP). With an OEAP, an employee at home or in a temporary micro-office will have access to the corporate SSID and the corporate network without the need to set up a VPN or have any advanced technical know-how..Access point with internal antennas for indoor environments.Management console port (RJ45); 1 x 100, 1000, 2500 Multigigabit Ethernet (RJ45): IEEE 802.3bz; USB 2.0 (enabled via future software).Dimensions: 1.7"H x 8"W x 8"D.Integrated antenna: 2.4GHz, 3dBi peak gain, internal antenna, omnidirectional in azimuth; 5GHz, 4dBi peak gain, internal antenna, omnidirectional in azimuth.IEEE 802.11ax emerging standard, also known as High-Efficiency Wireless (HEW) or Wi-Fi 6, builds on 802.11ac.OFDMA-based scheduling splits the bandwidth into smaller chunks called Resource Units (RUs), which can be allocated to individual clients in both the downlink and uplink directions to reduce overhead and latency.New power-saving mode called Target Wake Time (TWT) allows the client to stay asleep and wake up only at prescheduled (target) times to exchange data with the AP.Integrated Bluetooth Low Energy (BLE) 5.0 radio to enable IoT use cases such as location tracking and wayfinding.Lifetime manufacturer limited warranty

Weatherproof and temperature hardened, Aruba 570 Series access points deliver the highest Wi-Fi 6 performance in outdoor and environmentally challenging locations. The high-performance and high power 570 Series APs deliver maximum capacity and range. It delivers 4x4:4SS MU-MIMO capability, Aruba's advanced ClientMatch and integrated Bluetooth to enable Aruba location services..AP-577 (US) 802.11ax 2x2:2/4x4:4 dual radio integrated directional antenna outdoor AP.Built in 90°H x 90°V directional antennas: 5 GHz (antennas 5.6dBi), 2.4 GHz (antennas 6.8dBi), BLE/Zigbee (Integrated omnidirectional antennas with peak gain of 8.4dBi).Ports: one HPE SmartRate port (RJ-45), one 100/1000BASE-T (RJ-45), USB-C.Security: WPA3 and Enhanced Open, MPSK enables simpler passkey management for WPA2 devices, a secure SSL/IPSec VPN tunnel and installed TPM for secure storage of credentials, keys and boot code.Dimensions: 5.6"H x 9.0"W x 8.7"D.Lifetime manufacturer limited warranty

TP-LINK® 5 Ghz IEEE 802.11n 300 Mbps Wireless access point is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -30 deg C. It is ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. Professional performance, coupled with user-friendly design, makes CPE210 an ideal choice for both business and home users. It is designed to work in harsh environments, even in some of the world's most hostile climate conditions..Uses Qualcomm Atheros Enterprise AR9350B 560MHz CPU processor for optimum performance, MIPS 74Kc, 64MB DDR2 RAM, 8MB Flash memory for better storage.Has 1 x 10/100 Mbps Ethernet interfaces/ports for easy connection.Built-in 13dBi 2 x 2 dual-polarized directional antenna for effective communication, beam width of 45 deg (H-Plane)/30 deg (E-Plane).300 Mbps wireless transmission speed for superior performance.Supports WPA, WPA2, WPA-PSK (AES/TKIP), WPA2-PSK (AES/TKIP), 64/128/152-bit WEP wireless security.Measures 8.8" x 3.1" x 2.4".802.11b/g//n receiver sensitivity, 2.4 GHz maximum frequency ISM, 5.15 GHz - 5.85 GHz UNI, > 80percentage efficiency.Supports operating systems Windows 98SE/NT/2000/XP/Vista/8/7, Mac OS, NetWare, UNIX, Linux.Uses enclosure Outdoor ASA stabilized plastic material.100 - 240 VAC input voltage, 0.8 A input current, 24 VDC, 1 A Max output for high performance.Uses TDMA mode proprietary protocol.27 dBm transmission power and 13 W Max power consumption.Meets IEEE 802.11a/n wireless standards.Contains outdoor wireless CPE, 24V 1A passive PoE adapter, pole mounting straps, AC power cord, installation guide.Meets CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark standards.Software features: Wireless configurations: Pharos MAXtream TDMA Technology, 802.11a/n Modes, Selectable Channel Width: 5/10/20/40MHz, Automatic Channel Selection, Transmission Power Control, Dynamic Frequency Selection (DFS), WDS Enable/Disable.Warranty: 2 years limited.TP-LINK® 5 Ghz IEEE 802.11n 300 Mbps Wireless access point offers solutions for outdoor wireless networking applications. It has built-in high gain dual-polarized antenna.

TP-LINK® CPE210 2.48 GHz IEEE 802.11n 300 Mbps Wireless access point is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -30 deg C. It is ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. Professional performance, coupled with user-friendly design, makes CPE210 an ideal choice for both business and home users. It is designed to work in harsh environments, even in some of the world's most hostile climate conditions..Uses Qualcomm Atheros 560MHz CPU processor for optimum performance, MIPS 74Kc, Has 64MB DDR2 RAM, 8MB Flash memory for better storage.Has 1 x 10/100 Mbps Ethernet interfaces/ports for easy connection.Built-in 9dBi 2 x 2 dual-polarized directional antenna for effective communication, Beam width of 65 deg (H-Plane)/35 deg (E-Plane).300 Mbps wireless transmission speed for superior performance.Supports WEP, WPA/WPA2, WPA-PSK/WPA2-PSK wireless security.Measures 8.8" x 3.1" x 2.4".802.11b/g//n receiver sensitivity, > 80percentage efficiency, Operates at frequency 2.4 - 2.483 GHz.Supports operating systems Microsoft Windows 98SE, NT, 2000, XP, Vista or Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux.Supports centralized management system.100 - 240 VAC input voltage, 0.8 A input current, 24 VDC, 1 A Max output for high performance.Uses TDMA mode proprietary protocol.27 dBm transmission power and 10.5 W Max power consumption.Meets IEEE 802.11b/g/n wireless standards.Contains 2.4 GHz 300Mbps 9 dBi putdoor CPE, 24V 1 A passive PoE adapter, pole mounting straps, AC power cord, installation guide.Meets RoHS, WEEE standards.TP-LINK® 2.48 GHz IEEE 802.11n 300 Mbps Wireless access point offers solutions for outdoor wireless networking applications. It has built-in high gain dual-polarized antenna.

Weatherproof and temperature hardened, Aruba 570 Series access points deliver the highest Wi-Fi 6 performance in outdoor and environmentally challenging locations. The high-performance and high power 570 Series APs deliver maximum capacity and range. It delivers 4x4:4SS MU-MIMO capability, Aruba's advanced ClientMatch and integrated Bluetooth to enable Aruba location services..AP-575 (US) 802.11ax 2x2:2/4x4:4 dual radio integrated omni-antenna outdoor AP.Built in omni directional antennas: 5 GHz (antennas 5dBi), 2.4GHz (antennas 3.4dBi), BLE/Zigbee (integrated omnidirectional antenna and the peak gain of 6dBi).Ports: one HPE SmartRate port (RJ-45), one 100/1000BASE-T (RJ-45), USB-C.Security: WPA3 and Enhanced Open, MPSK enables simpler passkey management for WPA2 devices, a secure SSL/IPSec VPN tunnel and installed TPM for secure storage of credentials, keys and boot code.Dimensions: 10.6"H x 9.4"W x 9.4"D.Lifetime manufacturer limited warranty

The AP 330 is WatchGuard's all-purpose Wi-Fi 6 access point and is the ideal choice for mid-density indoor environments of all sizes to utilize the most secure WPA3 encryption for a seamless experience. Includes 2x2 radio scanning optimized for Wi-Fi 6 with six internal antennas. Maximum TX power delivers 22 dBm and a 2dBi antenna gain with one Ethernet port supporting up to 2.5 Gbps. These Wi-Fi 6 access points deliver a maximum data rate for a seamless wireless experience by supporting up to 1.2 Gbps on the 5 GHz band and 574 Mbps available on the 2.4 GHz band. WatchGuard’s AP130, AP330, AP430CR, and AP432 requires an active Management License. Select from a Standard or USP Management License to activate and access WatchGuard Cloud. The Management License is required to activate and manage the WatchGuard access points..The WatchGuard AP330 operates on dual bands: the 2.4 GHz and 5 GHz frequencies. It is designed for medium-density indoor environments, such as offices, schools, and retail spaces, providing reliable and high-efficiency Wi-Fi 6 connectivity..It supports the Wi-Fi 6 (802.11ax), standard up to 1.2 Gbps on the 5 GHz band and 0.574 Gbps on the 2.4 GHz band..The WatchGuard AP330 supports PoE (Power over Ethernet) 54V DC 802.3at (PoE+).Supports high-efficiency wireless connectivity with WPA3 encryption..Connector, Port or Interface Types are 1 x 2.5 Gbps Ethernet port (PoE+), 1 x USB port (currently not in use), 1 x RJ45 serial console port..Included Components are Access point unit, mounting hardware, quick start guide..Power Source PoE 54V DC 802.3at..This device have Frequencies of 2.4 GHz and 5 GHz bands..Its has The Restriction of Hazardous Substances (RoHS) is a standard..The WatchGuard AP330 comes with a standard 1-year warranty

The AP 430 CR is perfect for high-density deployments that include an industrial-rated IP67 enclosure, designed for either indoor or rugged outdoor deployment with superior Wi-Fi 6 performance and secure WPA3 encryption. Includes six external antennas to deliver a maximum TX power of 23dBm. One ethernet port is included to support up to 5 Gbps and includes one gigabit PoE+ port. Lightning-fast speed crafts an unwavering connectivity executed through a total of 2402 Mbps the 5 GHz band and 574 Mbps delivered on the 2.4 GHz band. Integrated 4x4 radio chains and streams to deliver a secure and seamless network experience. WatchGuard's AP130, AP330, AP430CR, and AP432 requires an active Management License. Select from a Standard or USP Management License to activate and access WatchGuard Cloud. The Management License is required to activate and manage the WatchGuard access points. Requires 6 external antennas (WG9004) sold separately..Dual-band (2.4 GHz and 5 GHz) designed for outdoor use in harsh environments..Max Data rate up to 574 Mbps available on the 2.4 GHz band, Max Data rate up to 2.3 Gbps on the 5 GHz band.Supports PoE (802.3at) and Wi-Fi 6 standard..Offers MU-MIMO for efficient multiple device connectivity..1-GbE-RJ45 Ports 1x 5-GbE-RJ45 Ports 1x PoE Powered Device (PD) PoE-PD Ports.Package Contents AP430CR Outdoor Access Point Wall Mount Plate Pole Mount Clamp.Powered via PoE or optional DC power adapter..Operates on 2.4 GHz and 5 GHz frequencies with enhanced range..IP67-rated for dust and water resistance, compliant with FCC, CE, and RoHS..Comes with a 1-year limited hardware warranty.Support for up to eight individual SSIDs per radio allows for maximum flexibility in network design.Lightning-fast speed crafts an unwavering connectivity experience executed by 2402 Mbps on the 5 GHz band and 574 Mbps delivered on the 2.4 GHz band

The TP-LINK AX3000 dual-band Wi-Fi 6 access point is designed for business environments requiring high-performance Wi-Fi. Next-era business Wi-Fi 6 with speeds up to 2976Mbps brings more than twice the speed of Wi-Fi 5. Every application feels more fluid with drastically improved Wi-Fi speeds. Wi-Fi 6 features such as OFDMA and MU-MIMO handle multiple clients across congested environments like typical office spaces, lodging, and hospitals. Enjoy faster speeds on more devices with less lag..Dual-band Wi-Fi 6 access point designed for business environments requiring high-performance Wi-Fi.Offers simultaneous 574Mbps on 2.4GHz and 2402Mbps on 5GHz (2976Mbps in total) Wi-Fi speeds.Supports both 802.3at PoE+ and DC (adapter included) power supply for flexible installations.Includes 1 x Gigabit Ethernet (RJ45) port.Package includes: access point, power adapter, ceiling/wall mounting kits, and installation guide.Power supply: 802.3at PoE, 12VDC, or 48V passive PoE.Frequencies: 2.4GHz and 5GHz.Meets or exceeds the CE, FCC, and RoHS standards.Doubles the data at peak transmission times on a single stream with HE160.Omada mesh enables wireless connectivity between access points for extended range and flexible deployment.Omada SDN integration manages the whole network locally or from the cloud via web UI or the Omada app.Intelligent self-organization optimizes the best path between EAPs, while self-healing ensures you stay online even when one AP is disrupted.Ensures that customers enjoy uninterrupted streaming when moving around by switching clients automatically to the access points with the optimal signal.Exceptional performance with compact design ensures simple Wi-Fi installation while saving space.With advanced enterprise security, WPA3 provides more data security for previously unsecured and open Wi-Fi hot spots.System requirements: Microsoft Windows XP/Vista/7/8/10/11 or Linux.2-year manufacturer limited warranty

WatchGuard's AP 130 is an ideal Wi-Fi 6 solution to support low-density indoor environments like a small office or remote workers with a secure WPA3 encryption. Integrated security is delivered by supporting the 802.11 standard and WPA3 encryption to enhance the Wi-Fi experience. Includes Wi-Fi 6 2x2 radio with four internal antennas. Maximum TX power delivers 22 dBm and a 3dBi antenna gain with one Ethernet port supporting up to 1 Gbps. Maximum data rate includes a crystal clear and seamless wireless experience supporting 1.2 Gbps on the 5 GHz band and 574 Mbps available on the 2.4 GHz band. WatchGuard’s AP130, AP330, AP430CR, and AP432 requires an active Management License. Select from a Standard or USP Management License to activate and access WatchGuard Cloud. The Management License is required to activate and manage the WatchGuard access points..This Dual-Band (2.4 GHz and 5 GHz) Device is designed for low-density indoor environments such as small offices or for remote workers..The WatchGuard AP130 supports the Wi-Fi 6 (802.11ax) standard Here are the maximum data transfer rates 2.4 GHz Band Up to 574 Mbps (0.574 Gbps) 5 GHz Band: Up to 1200 Mbps (1.2 Gbps).The WatchGuard AP130 supports PoE (Power over Ethernet): 54V DC 802.3at (PoE+)12. WiFi Standard: Wi-Fi 6 (802.11ax).Supports high-efficiency wireless connectivity with WPA3 encryption..Connector, Port or Interface Types are 1 x 1 Gbps Ethernet port (PoE+), 1 x USB port (currently not in use), 1 x RJ45 serial console port..Included Components AP130 Access Point Unit, Ceiling Mount T-Rail Brackets, Wall Mount Screws and Spacers, Quick Start Guide.Power source of 54V DC 802.3at (PoE+).Device supports these Frequencies 2.4 GHz and 5 GHz bands..Complies with the Restriction of Hazardous Substances (RoHS) directive, ensuring the product is free from specific hazardous materials and environmentally friendly..The WatchGuard AP130 comes with a standard 1-year hardware warranty.

Powerful and affordable 5 GHz sector access point. GPS synchronized units provide up to 450+ Mbps data throughput. Introducing the Ubiquiti airMAX LiteAP AC, the latest high-performance access point with disruptive pricing. Featuring an ultra-lightweight form factor, the Ubiquiti airMAX LiteAP AC was designed to be an affordable cost/performance solution for long-distance, wireless broadband bridging. Each of these models operates in the worldwide, license-free 5 GHz frequency range with high-performance speeds..Powerful access point that creates a wireless local area network.Dimensions: 14.21"H x 4.9"W x 2.81"D.Comes in white.Equipped with 10/100/1000 Ethernet port.Minimal fasteners simplify installation.Ball-joint mount provides adjustment flexibility for versatile mounting options.Features a lightweight antenna with an integrated radio in a sleek design.Delivers high throughput over its wired connection.Precise GPS frame synchronization enables colocated devices to transmit and receive data without interfering with each other, allowing for better frequency reuse and increased network stability.Integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Pole mounting kit included.Meets or exceeds FCC, IC, CE standards.2-year manufactuer limited warranty

Aruba Instant On AP11 Indoor access points include an easy to use web GUI and templates so access points are up and running in minutes. Comes with an integrated virtual controller for simple deployment of multiple access points. The Aruba Instant On AP11 indoor access point is built with premium hardware and software quality that's as reliable as coming from a trusted vendor. Effortless set-up right out of the box – in the palm of your hand..Entry-level wireless access points for small and growing businesses.Up to 867Mbps wireless data rate.Uplink Gigabit Ethernet port, with POE-in support.Dimensions: 1.3" x 6" x 6".DC power: 12V.Dual radio for simultaneous dual-band operation: 5GHz for up to 867Mbps wireless data rate and 2.4GHz for up to 300Mbps wireless data rate.Meets or exceeds UL 2043 plenum rating, EN 60601-1-1 and EN 60601-1-2, Wi-Fi Alliance standards.Support for WPA2/WPA3 protected employee and guest login with Enhanced Open for per user guest access.Ships with a (black) mount clip to attach to suspended ceiling rails, and a (white) mount clip to attach to solid surfaces (wall/ceiling).1-year manufacturer limited warranty

Ubiquiti Networks has designed airMAX ac radios with high performance and ease of installation in mind. The Rocket 2AC Prism features both airMAX ac and airPrism technologies for maximum wireless performance in high‑density areas. Pair the Rocket 2AC Prism with airMAX ac antennas for optimal performance: PtP backhaul RocketDish ac Antenna, PtMP links airMAX ac Sector..Rocket 2AC Prism features both airMAX ac and airPrism technologies for maximum wireless performance in high-density areas.Contains 10/100/1000 Ethernet port.Dimensions: 9.06"H x 3.47"W x 1.58"D.Maximum power consumption: 8.5W.Delivers complete coverage of the 2.4GHz spectrum with a single radio; operating frequency: 2412-2462MHz.Meets or exceeds FCC, IC, CE, RoHS standards.Independent processor on the PCBA powers a second, dedicated, radio, which persistently analyzes the full 2.4GHz spectrum and every received symbol to provide you with advanced RF analytics.AirPrism technology creates a high SNR by isolating signals within the operating channel and rejecting interference using specialized circuitry, the high-selectivity receiver (HSR).Made of die-cast aluminum with white powder coating.Features 128MB DDR2 SDRAM, 16MB NOR flash memory.2-year manufacturer limited warranty

The WatchGuard AP332CR is designed for medium-density deployments and is IP67-rated to enable use in outdoor and rugged environments. This dual-band access point delivers fast, reliable coverage with a 2x2 radio and four external, omnidirectional antennas offering up to 1.2 Gbps on the 5 GHz band. A single PoE+ port is included to support data rates up to 2.5 Gbps. Utilizing WatchGuard Cloud for deployment and configuration, the AP332CR offers a seamless experience with Wi-Fi 6 performance and WPA3 encryption ? making it ideal for building easily scalable networks across school campuses, public hotspots, and smaller manufacturing environments..Dual-band (2.4 GHz and 5 GHz) for outdoor/rugged environments..Wi-Fi 6 (802.11ax) with up to 2.4 Gbps (5 GHz) and 574 Mbps (2.4 GHz)..One PoE+ port supporting up to 2.5 Gbps, Wi-Fi 6 standard..Provides MU-MIMO for efficient, multiple device connectivity..Interfaces/Ports Ethernet Technology 2.5 Gigabit Ethernet Number of Network (RJ-45) Ports 1 PoE PD Port.Package Contents AP332CR Outdoor/Rugged Access Point 4 x Omnidirectional External Antennas.Powered via PoE or optional DC power input..Operates on 2.4 GHz and 5 GHz bands for wide coverage..IP67-rated for dust and water resistance, compliant with FCC, CE, and RoHS..Comes with a 1-year limited warranty.One PoE+ port supporting up to 2.5 Gbps

The Slimline Business Wi-Fi 6 AX3000 Ceiling Mount Wi-Fi 6 Access Point AX3000 Wi-Fi 6 Speed 2402 Mbps on 5 GHz + 574 Mbps on 2.4 GHz High-Efficiency Wi-Fi 6 More connected devices can enjoy faster speeds Centralized Cloud Management Manage the whole network locally or from the cloud 160 MHz Channel Double the data at peak transmission times on a single stream with HE160 Auto Channel Selection and Power Adjustment Optimize overall performance by reducing Wi-Fi interference Omada Mesh Technology More flexible and convenient wireless deployment Seamless Roaming Uninterrupted streaming when moving between APs Ultra-Slim Design Φ160 mm x 33.6 mm elegant design brings more agility PoE+ Powered Supports both DC (adapter included) and 802.3at PoE+ for flexible installations..Operates on dual-band frequencies: 2.4 GHz and 5 GHz: Up to 2402 Mbps. access point is designed for various uses, including: Office: Stable, seamless, and high-security Wi-Fi coverage Hospitality: High-quality and full coverage Guest Wi-Fi.supports the latest IEEE 802.11ax wireless standard (Wi-Fi 6) with a maximum data transfer rate of 3000 Mbps (3 Gbps).Complies with IEEE 802.3at Power over Ethernet Plus (PoE+).Has the following connectors, ports, and interface types: 1× Gigabit Ethernet (RJ-45) Port (supports IEEE 802.3at PoE) Reset Button.Certified by : CE, FCC, RoHS..Comes with a limited Lifetime warranty..Designed for Business Environments - Requiring High-Performance Wi-Fi - Hospitality High-quality and Full Coverage Guest Wi-Fi

The Netgear access point supports the next generation Wi-Fi 6 smart phones, IoT devices, and notebook computers, delivering up to 40% more throughput to each individual device in the 5GHz band and 70% more throughput in the 2.4GHz band, compared to the previous generation equivalent model; provides 4x the client device connection, allowing businesses to serve more customers with better speed and less congestion. This access point is perfect in high density client device environments such as schools, hotels, restaurants and conference centers, and provides enterprise grade Wi-Fi network security. With Insight management, it works seamlessly with your current Netgear Insight managed switches, Wi-Fi access points and network storage, and is compatible with previous generation Wi-Fi devices (Wi-Fi 5 802.11ac for example) and Wi-Fi access points..This access point supports the next-generation Wi-Fi 6 smartphones, IoT devices, and notebook computers.Dual band 2x2 (2.4GHz and 5.0GHz) four streams of data for an aggregate throughput of up to 1.8Gbps.Contains one 100/1000/2.5GBASE-T Gigabit Ethernet (RJ-45) ports with Auto Uplink (Auto MDI-X) supporting IEEE 802.3af or 802.3at Power over Ethernet (PoE).Dimensions: 1.3"H x 6.33"W x 6.33"D.PoE power consumption: 15.3W.Business class Wi-Fi based on next generation 802.11ax Wi-Fi 6 technology on both 5.0GHz and 2.4GHz bands; backward compatible to 802.11b/g/n/a/ac.Supports Enterprise security and Enhanced Open security, such as WAP3, WPA Enterprise, 8x SSID and VLAN.Basic Service Set Coloring (BSS Coloring) enabling significant improvement in radio frequency channel efficiency and reduction of interference.Orthogonal Frequency Division Multiple Access (OFDMA) allowing simultaneous services to multiple devices in the same channel thus improving bandwidth efficiency and reducing latency.Target Wake Time (TWT) allows more efficient power usage resulting in longer battery life in Wi-Fi 6 client devices.One 802.3at 2.5Gbps PoE port; remote management and monitoring from Netgear Insight app or Cloud Portal for unrivaled management experience of your wireless network.Box contains: access point, wall/ceiling mount kit, installation guide.5-year manufacturer limited warranty

The multifunctional Aruba 203R Remote AP delivers secure and fast 802.11ac wireless and wired network access to corporate resources for branch and home offices.: Unique in the industry, the compact Aruba 203R remote AP is software configurable to operate in either 1x1 dual radio mode, or 2x2 single radio mode. It supports up to 867Mbps in the 5GHz band or up to 400Mbps in the 2.4 GHz band when operating in single radio 2x2 mode. In dual radio 1x1 mode, the maximum data rates for the 203R AP are 433Mbps in the 5GHz band and 200Mbps in the 2.4GHz band. The 203R AP offers a variety of enterprise-class features, including role-based network access, policy-based forwarding, and Adaptive Radio Management (ARM), which gives remote workers the same high-quality Wi-Fi experience they get at corporate headquarters. When additional capacity is desired, this low-cost 203R AP can be quickly added to an existing Aruba WLAN to improve network performance. Managed by the Aruba Mobility Controller, the 203R AP supports centralized configuration, data encryption, policy enforcement and network services. It extends corporate resources to remote locations by establishing site-to-site VPN tunnels to the data center. With an integrated Aruba Beacon, the 203R AP simplifies the remote management of a large scale network of battery-powered BLE Aruba Beacons and provides advanced location and indoor wayfinding, and proximity-based push notification capabilities. For large installations across multiple sites, the Aruba Activate service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, APs can configure themselves when powered up, slashing the cost and time to deploy wireless in remote branches and home offices. UNIQUE BENEFITS: Deploy with or without controller: The 203R can be deployed in either controller-based (ArubaOS) or controllerless (InstantOS) deployment mode. New 802.11ac flexible radio architecture: The 203R AP is software configurable to operate in either 1x1 dual radio mode, or 2x2 single radio mode. Supports up to 867Mbps in the 5GHz band (with 2SS/VHT80 clients) or up to 400Mbps in the 2.4 GHz band (with 2SS/VHT40 clients). In 1x1 dual radio mode, these max speeds are up to 433Mbps (5GHz) and 200Mbps (2.4GHz). Built-in Bluetooth Low-Energy (BLE) radio : Delivers location-based services for BLE-enabled mobile devices. Enables management of your deployment of battery-powered Aruba Beacons. Advanced Cellular Coexistence (ACC) : Minimizes the impact from out-of-band interference from sources such as 3G/4G cellular networks..When connected to a compatible router or a network switch, this wireless access point lets you enjoy wireless internet connectivity throughout your home or office.Ensure speedy data transfer of up to 867 Mbit/s with the IEEE 802.11ac wireless technology.Gigabit Ethernet port for ultra-fast wired network speeds.Its management capability provides efficient control over setup and configuration of your network

i24 is a gigabit dual-band ceiling access point that compliant with IEEE 802.11ac Wave 2, and offers a concurrent data rate up to 1167 Mbps. Powered by MU-MIMO technology, letting you enjoy better experience. And the built-in omni-directional antennas broaden the wireless coverage of a single AP. In addition, you are allowed to adjust its transmit power as required using the web UI, and use an IEEE 802.3at-compliant PoE sourcing equipment to power on it, achieving long-distance power supply without tampering your existing grid network. You are also allowed to use Tenda access controllers (AC) to configure and manage multiple i24 in a centralized manner..Access point operates on two wireless bands . The dual-band capability allows for more flexible and efficient wireless connectivity, making it suitable for both home and small business environments..Supports the 802.11ac Wave 2 wireless standard. It offers a maximum data transfer rate of 1167 Mbps (1.167 Gbps).This access point supports Power over Ethernet (PoE). it adheres to the Wi-Fi 5 standard, ensuring high-speed and reliable wireless connectivity..Provides robust wireless connectivity with the following features: Dual-Band Support: Operates on both 2.4 GHz and 5 GHz bands for flexible and efficient connectivity..includes the following connector, port, and interface types: One 10/100/1000 Mbps Ethernet Port (PoE) RESET Button SYS LED Indicator.In the box : Tenda I24 Access Point Power Adapter (DC: 12V 1A) Ethernet Cable User Manual Quick Installation Guide.Can be powered using: Power over Ethernet (PoE) DC power adapter (DC: 12V 1A).Certified by : Restriction of Hazardous Substances (RoHS)..Comes with a 3 year limited warranty.

The Netgear access point supports the next generation Wi-Fi 6 smart phones, IoT devices, and notebook computers, delivering up to 40% more throughput to each individual device in the 5GHz band and 70% more throughput in the 2.4GHz band, compared to the previous generation equivalent model; provides 4x the client device connection, allowing businesses to serve more customers with better speed and less congestion. This access point is perfect in high density client device environments such as schools, hotels, restaurants and conference centers, and provides enterprise grade Wi-Fi network security. With Insight management, it works seamlessly with your current Netgear Insight managed switches, Wi-Fi access points and network storage, and is compatible with previous generation Wi-Fi devices (Wi-Fi 5 802.11ac for example) and Wi-Fi access points..This access point supports the next-generation Wi-Fi 6 smartphones, IoT devices, and notebook computers.Dual band 2x2 (2.4GHz and 5.0GHz) four streams of data for an aggregate throughput of up to 1.8Gbps.Contains one 100/1000/2.5GBASE-T Gigabit Ethernet (RJ-45) ports with Auto Uplink (Auto MDI-X) supporting IEEE 802.3af or 802.3at Power over Ethernet (PoE).Dimensions: 1.33"H x 7.12"W x 12"D.PoE power consumption: 16.1W.Business class Wi-Fi based on next generation 802.11ax Wi-Fi 6 technology on both 5.0GHz and 2.4GHz bands; backward compatible to 802.11b/g/n/a/ac.Supports Enterprise security and Enhanced Open security, such as WAP3, WPA Enterprise, 8x SSID and VLAN.Basic Service Set Coloring (BSS Coloring) enabling significant improvement in radio frequency channel efficiency and reduction of interference.Orthogonal Frequency Division Multiple Access (OFDMA) allowing simultaneous services to multiple devices in the same channel thus improving bandwidth efficiency and reducing latency.Target Wake Time (TWT) allows more efficient power usage resulting in longer battery life in Wi-Fi 6 client devices.One 802.3at 2.5Gbps PoE port; remote management and monitoring from Netgear Insight app or Cloud Portal for unrivaled management experience of your wireless network.Box contains: access point, pole mount kit, wall/ceiling mount kit, installation guide.5-year manufacturer limited warranty

The Cisco Catalyst 9130AX series access points are the next generation of enterprise access points. They are resilient, secure, and intelligent. With the emergence of high-density networks and the Internet of Things (IoT), we are more dependent on wireless networks than ever before. Increasing numbers of devices connect to the network every year, ranging from high-performance client devices to low-bandwidth IoT devices. Cisco Catalyst 9130AX series access points provide a seamless experience anywhere for everyone, with high scaling and unmatched performance in diverse network deployments. Going beyond the Wi-Fi 6 (802.11ax) standard, the 9130AX series provides integrated security, resiliency, and operational flexibility as well as increased network intelligence. Extending Cisco's intent-based network and perfect for networks of all sizes, the Cisco Catalyst 9130AX Series scales to meet the growing demands of IoT while fully supporting the latest innovations and new technologies. The 9130AX series is also a leader in performance, security, and analytics. The Cisco Catalyst 9130AX series access points, paired with the Cisco Digital Network Architecture (Cisco DNA), are enterprise-class products that will address both your current and future needs. They are the first step in updating your network to take better advantage of all of the features and benefits that Wi-Fi 6 provides..This access point provides integrated security, resiliency, and operational flexibility as well as increased network intelligence.Provides up to 5.38Gbps (8x8 80MHz or dual 4x4 80+80MHz on 5GHz and 4x4 20MHz on 2.4GHz).Contains 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ45): IEEE 802.3az, management console port (RJ45), and USB 2.0 at 4.5W (enabled via future software).Dimensions: 1.88"H x 8.9"W x 8.9"D.Meets or exceeds IEC, EN, UL, CAN/CSA, AS/NZS, ICES, VCCI-CISPR, RSS standards.Delivers a better experience in typical environments with more predictable performance for advanced applications such as 4K or 8K video, high-density, high-definition collaboration apps, all-wireless offices, and IoT.The Cisco RF Application-Specific Integrated Circuit (ASIC) is a fully integrated Software-Defined Radio (SDR) that can perform advanced RF spectrum analysis and delivers features such as Cisco CleanAir, Wireless Intrusion Prevention System (WIPS), FastLocate, and Dynamic Frequency Selection (DFS) detection.Orthogonal Frequency-Division Multiple Access (OFDMA)-based scheduling splits the bandwidth into smaller frequency allocations called Resource Units (RUs), which can be assigned to individual clients in both the downlink and uplink directions to reduce overhead and latency.Supporting eight spatial streams, Multiuser Multiple Input, Multiple Output (MU-MIMO) enables access points to split spatial streams between client devices to maximize throughput.Power-saving mode called Target Wake Time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the access point.Comes in white.Lifetime manufacturer limited warranty

Extending Cisco's intent-based network and perfect for networks of all sizes, the Catalyst 9105 Access Points scale to meet the growing demands of IoT while fully supporting the latest innovations and new technologies. The Catalyst 9105 Access Points provide a seamless experience anywhere for everyone, with high scaling and unmatched performance in diverse network deployments. Going beyond the Wi-Fi 6 (802.11 ax) standard, the Catalyst 9105 Access Points provides integrated security, resiliency, and operational flexibility as well as increased network intelligence..Enterprise grade versatile wireless access point perfect for networks of all sizes.Features data rates up to 1.488 Gbps.Equipped with one 10/100/1000 Base-T (Ethernet) Uplink Interface and one RJ-45 management console port.Dimensions: 1.18"H x 5.9"W x 5.9"D.Wi-Fi 6 (802.11ax) designed to use both the 2.4-GHz and 5-GHz bands.OFDMA-based scheduling splits the bandwidth into smaller frequency allocations called Resource Units (RUs), which can be assigned to individual clients in both the downlink and uplink directions to reduce overhead and latency.Supporting two spatial streams, MU-MIMO enables access points to split spatial streams between client devices to maximize throughput.Spatial reuse (also known as Basic Service Set [BSS] coloring) allows the access points and their clients to differentiate between BSSs, thus permitting more simultaneous transmissions.A new power-saving mode called Target Wake Time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the access point.Intelligent Capture probes the network and provides Cisco DNA Center with deep analysis.Application Hosting on Catalyst 9100 Access Points helps future-proof and simplify IoT deployments by eliminating the need to install and manage overlay networks.Integrated Bluetooth Low Energy (BLE) 5 radio enables location-based use cases such as asset tracking, way finding or analytics.Container support enables edge computing capabilities for IoT applications on the host access point.Lifetime manufacturer limited warranty

Ubiquiti Networks designed airMAX AC radios for high performance and ease of installation. You have the freedom to deploy the Bullet AC anywhere in the world, as it allows for a high degree of flexibility in configuring channel bandwidths (subject to local country regulations. The Bullet AC eliminates the need to use RF cables and requires no special antenna or tools to install. There are no radio card / host board issues, no RF cable quality concerns, no mechanical stability concerns, and no enclosure mounting requirements. With the Bullet AC, operators can just plug in and go..Access Point is a fully integrated radio that delivers up to 300+ Mb/s real TCP/IP throughput.Dimensions: 7.48"H x 1.81"W x 1.81"D.Access point covers both 2.4GHz and 5GHz radio bands, covering a wide range of frequencies that work well for both short- and long-distance links.Meets or exceeds CE, FCC, and IC certifications.Networking interface: Gigabit Ethernet port; antenna connector: N-type connector.Throughput 160+ Mb/s at 2.4GHz, 300+ Mb/s at 5GHz.Maximum power consumption: 8W; output power: 22dBm.Power supply: 24VDC, 0.3A (minimum); power method: 24V passive PoE (pairs 4, 5+; 7, 8 return).ESD/EMP protection: +/- 24kV contact/air.Operating temperature: -40 degrees Fahrenheit to 158 degrees Fahrenheit.Operating humidity 5% to 95% noncondensing.ETSI300-019-1.4 shock and vibration.1-year manufacturer limited warranty

1+km transmission Range O1-5G adopts of internal power amplifier and 9dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 1km..Operating on the 5GHz band, the Tenda O1-5G KIT is ideal for PtP and P2MP applications like video surveillance, internet sharing, and long-range connectivity..Utilizing Wi-Fi 5 (802.11ac) with a maximum speed of 867 Mbps, it ensures fast and reliable wireless communication for data-intensive applications..Supports Power over Ethernet (PoE) and Wi-Fi 5, enabling simplified installation with power and data via a single Ethernet cable..It Offers robust outdoor connectivity with 11AC technology, 867Mbps speeds, and a 9dBi directional antenna for stable 1km connections..Included Components: 5GHz 9dBi 11AC 867Mbps Outdoor CPE, 1 x Power Adapter, 1 x PoE Injector, 1 x Quick Installation Guide.Supports 12V 1A Passive PoE and DC power options, offering flexible and easy installation in various environments..Operates on the 5GHz band, offering high-speed wireless connectivity with less interference than the 2.4GHz band..Features an IP65 waterproof enclosure for protection against dust and water..Certifications & Standards: FCC, CE, RoHS.Comes with 3 years limited warranty.

The NanoStation AC represent the next evolution of the iconic CPE design that revolutionized the wireless ISP industry. The NanoStation AC provides a secondary Ethernet port with software-enabled PoE. Use this port to conveniently power an external device, such as a PoE security camera, for seamless IP video integration. NanoStation AC model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. The NanoStation AC feature enhanced protection against ESD events. airOS8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..Access point has a dedicated Wi-Fi radio for management and is suitable for indoor and outdoor installations.Dimensions: 10.12"H x 3.31"W x 1.18"D.Compatible with airOS 8.Comes in white and made of UV-resistant polycarbonate.Powerful wireless features: access point PtMP airMAX mixed mode, airMAX ac protocol support, long-range point-to-point (PtP) link mode; selectable channel width: PtP (10/20/30/40/50/60/80MHz), PtMP (10/20/30/40MHz); automatic channel selection; transmit power control: automatic/manual; automatic distance selection (ACK timing); strong WPA2 security.Usability enhancements: airMagic channel selection tool, dynamic configuration changes, instant input validation, HTML5 technology, optimization for mobile devices, detailed device statistics, comprehensive array of diagnostic tools, including RF diagnostics and airView spectrum analyzer.Features airMAX technology and a dedicated Wi-Fi radio for management.This model utilizes the latest ESD protection to help protect against power surges.The radio and antenna are combined into a single body that takes up minimal space.No fasteners are required for pole‑mounting, and a single wall fastener (not included) is required for wall-mounting.Power supply: 24V, 0.5A Gigabit PoE supply (included); maximum power consumption: 9W.Power method: 802.3af alternative A (pairs 1, 2+; 3, 6 return); 24V passive PoE (pairs 4, 5+; 7, 8 return); gain: 16dBi.Networking interface: 10/100/1000MB/s Ethernet ports; channel bandwidths: 10/20/30/40/50/60/80MHz.Processor specs: Atheros MIPS 74Kc, 560MHz; memory: 64MB DDR2; cross-pol isolation: 20dB minimum.Polarization: dual linear; LEDs: power, Eth1, Eth2; signal strength.Operating temperature: -40 degrees Fahrenheit to 158 degrees Fahrenheit.Operating humidity: 5 to 95% noncondensing.ETSI300-019-1.4 shock and vibration.Meets or exceeds CE, FCC, IC standards

Enhance your small-to-midsize business with fast and reliable Wi-Fi connections by connecting the Cisco Business 240AC Dual-Band Wireless Access Point to your compatible network router or switch. This kit includes three dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 2333 Mb/s over the 2.4 GHz and 5 GHz frequencies. Both of the 240AC's Gigabit Ethernet ports support 802.3af/at power over Ethernet, allowing you to transfer both data and power over a single cable, which can be passed through to IP cameras and other devices when connected to a compatible switch..Dual-Band Wireless Access Point.Wi-Fi 5 (802.11ac) Wave 2.Up to 2333 Mb/s Throughput.2.4 GHz / 5 GHz (Dual-Band).Internal Omnidirectional Antennas.2 x Gigabit Ethernet PoE Ports.4x4 MIMO.Wall & Ceiling Mountable.Works with Cisco Business Mobile App.Warranty Limited Lifetime

These economical Wi-Fi 6 access points provide high-performance connectivity for any organization experiencing growing mobile, cloud and IoT requirements. With a wireless aggregate data rate of up to 1.5 Gbps and gigabit local wired ports, they deliver the range of connectivity options needed for venues such as hotels, residence halls, and remote offices alike. The Aruba 503H series APs are designed to optimize user experience by maximizing Wi-Fi efficiency and dramatically reducing airtime contention between clients. Features include Orthogonal frequency-division multiple access (OFDMA), and cellular optimization. With up to two spatial streams (2SS) and 80MHz channel bandwidth, the 503H series provides groundbreaking wireless capabilities for budget-conscious deployments.This access point provides high performance and cost-effective Wi-Fi 6 (802.11ax) for hospitality, branch, and teleworker deployments.With a wireless aggregate data rate of up to 1.5Gbps, delivers the range of connectivity options needed for venues such as hotels, residence halls, and remote offices alike.Contains three Ethernet wired network ports (RJ45) with auto-sensing link speed (10/100/1000BASE-T) and MDI/MDX.Dimensions: 5.9"H x 3.39"W x 1.57"D.Maximum power consumption: 10W DC powered, 11.4W POE powered.Two integrated semi-directional antennas for 2 x 2 MIMO with peak single antenna gain of 2.5dBi in 2.4GHz and 5.6dBi in 5GHz; built-in antennas are optimized for vertical wall or desk-mounted orientation of the AP.Meets or exceeds the FCC/ISED, CE, IEC/EN standards.Combine wireless and wired access in a single compact form factor.Perfect for organizations with work-from-home or teleworker initiatives.Built-in technology that resolves sticky client issues for Wi-Fi 6 and Wi-Fi 5 devices.Lifetime manufacturer limited warranty

This kit includes five dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 1167 Mb/s over the 2.4 GHz and 5 GHz frequencies. The 140AC's Gigabit Ethernet port supports passive 802.3af power over Ethernet (PoE), allowing you to transfer both data and power over a single cable when connected to compatible devices. Alternatively, you can power the device with a separately purchased PoE injector..Type of Product/Use: Dual-Band Wireless Access Point.Adapter Speed: 1167 Mbps.Number of ports and Type: 1 Gigabit Ethernet (RJ45) (Uplink) PoE, 1 Ethernet (RJ45) (Console).Dimensions as H 1.3 x W 5.9 x D 5.9 in inches.Installation Info: Wall & Ceiling Mountable.Power Rating/Voltage: 8 W.Supported Protocols: MAC Filtering, RADIUS.Warranty: Limited Lifetime.Enhance your business with fast and reliable Wi-Fi connections by connecting the Cisco Business 140AC Dual-Band Wireless Access Point to your compatible network router or switch.

The UniFi Controller v4 software is a powerful, enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities, the UniFi virtual control plane allows for unlimited scalability under one centralized controller..Type of Product: Wireless Access Point.Adapter Speed: 1300Mbit/s.Number of ports and Type: Gigabit Ethernet 2, PoE PD Port.Dimensions as H x W x D in inches: 7.7 x 7.7 x 1.4.Power Rating/Voltage: DC Input Power, Consumption 9 W.Frequency Range: 2.4 GHz, 5 GHz Dual-Band.Support/Encryption: Guest Portal/Hotspot Support.Warranty 1 Year.Form factor: Wall mountable, ceiling mountable.Wireless transmission speed: 1.27 Gbps, 2.4 GHz speed: 450 Mbps, 5 GHz speed: 1300 Mbps.Have 200+ concurrent clients.Supports guest traffic isolation.Intuitive UniFi controller software delivers powerful performance and intelligent switching.Design: Expandable.Contains wall/ceiling kits.Meets CE, FCC, IC certifications and standards.The UniFi AC Pro AP features the latest Wi-Fi 802.11ac, 3x3 MIMO technology in a refined industrial design and is ideal for deployment of maximum‑performance wireless networks.

WatchGuard’s high-performance Wi-Fi 6 access point is the ideal choice for high-density indoor environments of all shapes and sizes to utilize the most secure WPA3 encryption for a seamless Wi-Fi 6 experience for end users to enjoy.Dual-band (2.4 GHz and 5 GHz) for high-density environments..Wi-Fi 6 (802.11ax) with up to 4.8 Gbps (5 GHz) and 1.148 Gbps (2.4 GHz)..Supports PoE (802.3at) and Wi-Fi 6 standard..Supports MU-MIMO for multiple device connectivity..2.5 Gigabit Ethernet (GbE) port for wired connectivity..Includes access point unit, mounting hardware, and user guide..Powered via PoE or separate power adapter..Operates on 2.4 GHz and 5 GHz frequency bands..Complies with Wi-Fi 6 (802.11ax), FCC, CE, and RoHS certifications..Comes with a 1-year limited warranty.Qualcomm Cypress IPQ8072A Quad-core A53 ARM processor at 2 GHz with 2 GB RAM and 256 MB Flash

The Ubiquiti® airCube-AC Series ACB-AC-US wireless access point in black, has a sleek design with durable plastic construction. It features 4 Gigabit Ethernet ports with data transfer rate of up to 1.14 Gbps. The dual band access point utilizes 802.11ac and 2x2 MIMO technologies for reliable performance. It has throughput of up to 300 Mbps in 2.4 GHz radio band and up to 866.7 Mbps in 5 GHz radio band. This access point with super antenna, ensures UNMS and U mobile support. It is suitable for use in your customer deployments..Wi-Fi access point is perfect for use in customer deployments.Dimensions: 3.52"H x 3.51"W x 3.46"D.Comes in black color with plastic construction.Interfaces/ports: 4 x Gigabit Ethernet port.Wireless LAN: 802.11ac 2x2.Gain: 4 dBi at 2.4 GHz, 5 dBi at 5 GHz.Frequency: Dual band 2.4 GHz, 5 GHz simultaneously.Power supply: 24 Volt PoE or 24 Volt PSU in on LAN port 1.Wireless transmission speed: 1.14 Gbps.Maximum power consumption: 8.5 W, temperature: -10 to 50 deg C (operating), humidity: 5 to 95 percent noncondensing (operating).Throughput: Up to 300 Mbps in the 2.4 GHz radio band, Up to 866.7 Mbps in the 5 GHz radio band.Features UNMS support, super antenna, U mobile support and sleek design.Features 22 dBm maximum TX power, status LED and UNMS app for fast setup from a mobile device.Features PoE pass-through, Powers airMAX device, with PoE in/out, controllable 24 V PoE out on WAN port technology.Meets CE, FCC, IC standards.Weight: 9.88 oz.

The hardened, Aruba 518 series access point delivers high Wi-Fi 6 performance in harsh, weather-protected environments such as warehouses, industrial freezers or enclosures in extreme environments such as stadiums. It delivers 4x4:4SS MU-MIMO capability, Aruba's advanced ClientMatch and integrated Bluetooth to enable Aruba location services. Purpose-built to survive in the harshest outdoor environments, 518 series APs withstand exposure to extreme high and low temperatures, persistent (non-precipitant) moisture, and are sealed to keep out airborne contaminants. All electrical interfaces include industrial strength surge protection. Aruba Wi-Fi 6 access points provide high-performance connectivity for any organization experiencing growing numbers of IoT and mobility requirements. With maximum aggregate on air data rate of 3Gbps (HE80/HE40) the 518 series delivers the speed and reliability needed for any environment..Hardened access point delivers high-performance Wi-Fi 6 in harsh, weather-protected environments such as warehouses, industrial freezers, or enclosures in extreme environments such as stadiums.With the maximum aggregate on-air data rate of 3Gbps (HE80/HE40), this access point delivers the speed and reliability needed for any environment.AP can be configured to enable or disable capabilities based on available PoE+ power, perfect when wired switches have exhausted their power budget.Delivers 4x4:4SS MU-MIMO capability; Aruba's advanced ClientMatch and integrated Bluetooth enable Aruba location services.Features 1 x HPE SmartRate port (RJ45), 1 x 10/100/1000BASE-T (RJ45), 1 x USB Type-C console interface.Access point supports Power over Ethernet (PoE+), 802.3at compliant; worst-case access point power consumption: 25.6W (power sources sold separately).Dynamic frequency selection (DFS) maximizes the use of available RF spectrum.Meets or exceeds the FCC/ISED, CE Marked, RED Directive 2014/53/EU, EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, UL/IEC/EN 60950, EN 60601-1-1, EN60601-1-2 standards.Link aggregation (LACP) support between both network ports for redundancy and increased capacity.Software-configurable dual radios support 5GHz (Radio 0) and 2.4GHz (Radio 1).5GHz: four RP-SMA connectors for external antenna operation; 2.4GHz: two RP-SMA connectors for external antenna operation.Supported modulation types: 802.11b - BPSK, QPSK, CCK; 802.11a/g/n - BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (proprietary extension); 802.11ac - BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM (proprietary extension); 802.11ax - BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM.Supported radio technologies: 802.11b - direct-sequence spread spectrum (DSSS); 802.11a/g/n/ac - orthogonal frequency-division multiplexing (OFDM);­ 802.11ax - orthogonal frequency-division multiple access (OFDMA) with up to 16 resource units (RU).Each access point provides connectivity for a maximum of 512 associated clients per radio (1024 total) and up to 16 BSSIDs per radio.Aruba's patented AI-powered ClientMatch technology ensures that all clients are attached to their best serving access point; session metrics, network metrics, applications, and client type are used to identify and maintain best connection.Minimum operating system software versions: ArubaOS and Aruba InstantOS 8.7.0.0.Dimensions: 8.5"H x 8.5"W x 2.5"D.Regulatory domain: United States of America.Lifetime manufacturer limited warranty

This kit includes three dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 1167 Mb/s over the 2.4 GHz and 5 GHz frequencies. The 140AC's Gigabit Ethernet port supports passive 802.3af power over Ethernet (PoE), allowing you to transfer both data and power over a single cable when connected to compatible devices. Alternatively, you can power the device with a separately purchased PoE injector..Type of Product/Use: Dual-Band Wireless Access Point.Adapter Speed: 1167 Mbps.Number of ports and Type: 1 Gigabit Ethernet (RJ45) (Uplink) PoE, 1 Ethernet (RJ45) (Console).Dimensions as H 1.3 x W 5.9 x D 5.9 in inches.Installation Info: Wall & Ceiling Mountable.Power Rating/Voltage: 8 W.Supported Protocols: MAC Filtering, RADIUS.Warranty: Limited Lifetime.Enhance your business with fast and reliable Wi-Fi connections by connecting the Cisco Business 140AC Dual-Band Wireless Access Point to your compatible network router or switch.

The Ubiquiti UniFi UAP-AC-PRO 1300 Mbps wireless access point is a cost-effective solution for developing high-performance wireless networks. This wireless access point features the latest Wi-Fi 802.11ac technology in a refined industrial design for reliable performance. This white access point measuring 1.4" x 7.7" dia, has two 10/100/1000 Ethernet ports/interfaces for connectivity. It supports wireless data transmission rate up to 1300 Mbps at 5 GHz frequency band and 450 Mbps at 2.4 GHz frequency band..Wireless access point to connect your wireless devices to a wired network.Dimensions: 1.4"H x 7.7"Dia.Color: White.Wireless LAN standard: IEEE 802.11ac.Ports/interfaces: Two 10/100/1000 Ethernet.Wireless transmission speed: 1300 Mbps (5 GHz), 450 Mbps (2.4 GHz).Frequency band: 2.4 GHz/5 GHz.Operating range: 122 m.Antenna: Three internal MIMO.Wireless security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES).Power consumption: 9 W.Advanced traffic management: VLAN, Advanced QoS, Guest Traffic Isolation, WMM, 200+ concurrent clients.Mounting: Wall/ceiling.Includes wall/ceiling kits.Meets CE, FCC, IC certifications and standards.Weight: 12.4 oz., 15.9 oz. (with mounting kit)

This kit includes dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 1167 Mb/s over the 2.4 GHz and 5 GHz frequencies. The 140AC's Gigabit Ethernet port supports passive 802.3af power over Ethernet (PoE), allowing you to transfer both data and power over a single cable when connected to compatible devices. Alternatively, you can power the device with a separately purchased PoE injector..Type of Product/Use: Dual-Band Wireless Access Point.Adapter Speed: 1167 Mbps.Number of ports and Type: 1 Gigabit Ethernet (RJ45) (Uplink) PoE, 1 Ethernet (RJ45) (Console).Dimensions as H 1.3 x W 5.9 x D 5.9 in inches.Installation Info: Wall & Ceiling Mountable.Power Rating/Voltage: 8 W.Supported Protocols: MAC Filtering, RADIUS.Warranty: Limited Lifetime.Enhance your business with fast and reliable Wi-Fi connections by connecting the Cisco Business 140AC Dual-Band Wireless Access Point to your compatible network router or switch.

The gigabit dual-band indoor/outdoor access point OAP1200 offers a concurrent data rate as high as 1167 Mbps. Equipped with 2 omni-directional high-gain antennas, OAP1200 provides a maximum coverage radius of 200 meters. OAP1200 can be installed either on the wall or around a pole. OAP1200 can meet different requirements by connecting antennas of different specifications to the standard RP-SMA connectors. With the IP65 enclosure, OAP1200 is designed for wireless coverage in factories, warehouses and other harsh outdoor environments..Tenda OAP1200 Outdoor Gigabit Wi-Fi Access Point is a dual-band device that provides high-speed internet connectivity for outdoor areas.Supports the 802.11ac wireless standard, offering a data transfer rate of up to 1167 Mbps on the 5 GHz band..Offers wireless connectivity through the 802.11ac wireless standard.Powered by MU-MIMO technology, a single OAP1200 can communicate with multiple wireless clients at the same time.OAP1200 allows clients that support either 2.4 GHz or 5 GHz band, or both, to connect to it at the same time.Achieve a concurrent data rate of 1167 Mbps, enabling seamless connectivity for multiple devices.With 2 omni-directional high-gain antennas, enjoy a maximum coverage radius of 200 meters, ensuring robust wireless signals across long distances..Mount the OAP1200 on walls or poles for versatile deployment options tailored to your environment.

Tenda AC1200 i24 is a gigabit dual-band ceiling access point that is compliant with IEEE 802.11ac Wave 2 and offers a concurrent data rate up to 1167Mbps. Powered by MU-MIMO technology, letting you enjoy a better experience. And the built-in omnidirectional antennas broaden the wireless coverage of a single AP. In addition, you are allowed to adjust its transmit power as required using the web UI and use an IEEE 802.3at-compliant PoE sourcing equipment to power on it, achieving long-distance power supply without tampering your existing grid network. You can use Tenda access controllers (AC) to configure and manage multiple i24 in a centralized manner..Gigabit dual-band ceiling access point provides satisfying wireless Internet connection for desktop computers, notebooks, and other devices.Up to 1317Mbps dual-band data rate and 1000Mbps Ethernet port let you enjoy ultrafast Internet connections.Contains Ethernet and DC power ports.Dimensions: 7.01"H x 7.01"W x 1.5"D.Maximum power consumption: full-load 13.5W.Allows clients that support either 2.4GHz or 5GHz band, or both, to connect to it at the same time, tripling the quantity of connected clients of traditional single-band AP.Meets or exceeds CE, FCC, and RoHS standards.Wireless security: WEP, WPA2-PSK, WPA-PSK, WPA2, WPA.Optimized antennas make it outstanding in radiating wireless signals and broadening wireless coverage.Featuring air interface scheduling, it can evenly allocate air interface resources, thus improving your wireless network speed as a whole by preventing clients with low data rate from consuming too much network resources.It also allows you to customize the RSSI threshold value so that you can disconnect clients that do not reach the RSSI.Powered by multiple interference-mitigation technologies, it automatically chooses the best channel and adjusts the transmit power to a reasonable value, significantly optimizing wireless signals by mitigating co-channel interference and electromagnetic interference (EMI).You are allowed to set multiple SSIDs and enabled to add VLAN tags for SSIDs with the IEEE 802.11q VLAN-compliant feature so as to protect the security of your network.You can use an IEEE 802.3at-compliant PoE sourcing equipment or a DC power adapter to power on it.You are allowed to configure and manage multiple i24 in a centralized manner through all Tenda access controllers (AC) and enterprise routers that include AC functionality and enjoy simple management, configuration, and monitoring of all access points.Comes in white

Weatherproof and temperature hardened, Aruba 570 Series access points deliver the highest Wi-Fi 6 performance in outdoor and environmentally challenging locations. The high-performance and high power 570 Series APs deliver maximum capacity and range. It delivers 4x4:4SS MU-MIMO capability, Aruba's advanced ClientMatch and integrated Bluetooth to enable Aruba location services..Wireless dual-band (2.4GHz, 5GHz) outdoor access point designed for the highest levels of performance and greater deployment flexibility.Features Wi-Fi 6 standard with a combined peak data rate of up to 4.8Gbps.Include an integrated Bluetooth 5 and 802.15.4 radio (for Zigbee support) to simplify deploying and managing IoT-based location services, asset tracking services, security solutions and IoT sensors.Features 1 x 1000Base-T - RJ-45, 1 x console - USB-C, 1 x HPE Smart Rate - RJ-45.AP supports Power over Ethernet (on ports E0 and/or E1).Supported frequency bands: 2.400 to 2.4835 GHz (ISM); 5.150 to 5.250 GHz (U-NII-1); 5.250 to 5.350 GHz (U-NII-2A); 5.470 to 5.725 GHz (U-NII-2C); 5.725 to 5.850 GHz (U-NII-3/ISM); 5.850 to 5.875 GHz (U-NII-4).TAA-compliant.Features include Uplink and Downlink Orthogonal Frequency Division Multiple Access (OFDMA), Downlink Multi-User MIMO (MU-MIMO), and cellular co-location.The ACC feature uses built in filtering to automatically minimize the impact of interference of high power cellular base stations, in building distributed antenna systems as well as small cell and femtocell equipment.With the introduction of WPA3 and Enhanced Open, a Wi-Fi 6 certified client will never send unencrypted traffic over the air.AP provides connectivity for a maximum of 512 associated clients per radio (1024 in total).Available management choices include Aruba Central (cloud-based) or Aruba AirWave (multivendor, on premises) solutions.Withstands harsh outdoor weather conditions, providing fast speed, high density, and reliable connectivity outdoors in large open areas, such as stadiums and parking lots.Lifetime manufacturer limited warranty

Durable, weatherproof enclosure for outdoor Wi-Fi applications.Up to 1200Mbps with 2-2 MIMO technology.High transmission power and high gain antennas provide a long-range coverage area

Purpose-built to survive in the harshest outdoor environments, Aruba 580 Series outdoor access points are designed for the highest levels of performance and greater deployment flexibility – all backed by a limited lifetime warranty. Aruba 580 Series APs deliver the speed and reliability needed for large enterprise and Industrial IoT deployments with high-power Bluetooth and 802.15.4/Zigbee radios and flexible power options..Wireless dual-band (2.4GHz, 5GHz) outdoor access point designed for the highest levels of performance and greater deployment flexibility.Flagship Wi-Fi 6 performance and speed with a maximum aggregate data rate of 2.97 Gbps and dual-band 4x4 radios.Flexible connectivity and power options with support for 5 Gbps SmartRate Ethernet ports or 10Gbps SFP+ ports and 802.3bt Class 6 power or AC power.Supports direct AC power and Power over Ethernet (POE; on port E0 only).Supported frequency bands: 2.400 to 2.4835 GHz (ISM); 5.150 to 5.250 GHz (U-NII-1); 5.250 to 5.350 GHz (U-NII-2A); 5.470 to 5.725 GHz (U-NII-2C); 5.725 to 5.850 GHz (U-NII-3/ISM).Features built in omni-directional antennas (H and V polarized); 5Ghz antennas 4.5dBi uncorrelated avg (5.8dBi peak); 2.4GHz antennas 3.0dBi uncorrelated avg (4.4dBi peak); Bluetooth antenna 4.8dBi peak.Support for 5Gbps NBase-T Ethernet, up to 10Gbps SFP+, and 1Gbps (w/PoE Out).High-power Bluetooth and Zigbee radio for IoT connectivity with support for maximum range and performance.Aruba Intelligent Power Monitoring (IPM) allows the AP to operate if there is not enough PoE power as well as manage heat to prevent overheating in the most extreme environments.State of the art security with WPA3 and Enhanced open.Great for large-scale outdoor environments including universities, large enterprises, and industrial applications.Built to survive the harshest environments, the IP66/67 rated access point survives high wind, extreme temperatures, and moisture.Lifetime manufacturer limited warranty

These economical Wi-Fi 6 access points provide high‑performance connectivity for any organization experiencing growing mobile, cloud and IoT requirements. With a wireless aggregate data rate of up 1.5 Gbps and gigabit local wired ports, they deliver the range of connectivity options needed for venues such as hotels, residence halls, and remote offices alike..Wireless dual-band (2.4GHz/5GHz) indoor access point intended for hospitality, branch, and teleworker deployments.AX access point features maximum data rates of 1.2Gbps on the 5GHz band, and 287Mbps on the 2.4GHz band (for an aggregate peak data rate of 1.5Gbps).Two ports with PoE support.Wi-Fi 6 certification supports all mandatory 802.11ax features that include MU-MIMO, OFDMA, TWT, and more; supports PoE.Contains a SmartRate 2.5 Gigabit Ethernet uplink port, four 1 Gigabit Ethernet (two with PoE-in support), USB 2.0 host interface (Type A connector), and a DC power connector.Power over Ethernet (PoE): 802.3at.Dual radio for simultaneous dual-band operation: 5GHz and 2.4GHz 802.11ax MIMO.Meets or exceeds the Wi-Fi Alliance, Bluetooth SIG, Ethernet Alliance, EN 60601-1-1, and EN60601-1-2 standards.Support OFDMA and MU-MIMO for enhanced multi-user efficiency.Advanced Cellular Coexistence uses built-in filtering to automatically minimize the impact of interference from cellular networks, distributed antenna systems (DAS), and commercial small cell or femtocell equipment.Integrated Bluetooth 5 and 802.15.4 radio (for Zigbee support) to simplify deploying and managing IoT-based location services, asset tracking services, security solutions, and IoT sensors.Includes components of Aruba's 360 Secure Fabric to help protect user authentication and wireless traffic.Provides support for WPA2/WPA3 protected employee and guest login with Enhanced Open for per-user guest access.This AP can be used to establish a secure SSL/IPSec VPN tunnel to a mobility controller that is acting as a VPN concentrator.Aruba's Policy Enforcement Firewall (PEF) feature encapsulates all traffic from the AP to the mobility controller (or gateway).Trusted Platform Module (TPM) for secure storage of credentials, keys, and boot code.Provides connectivity for a maximum of 256 associated clients per radio (512 in total).Low-density parity check (LDPC) delivers high-efficiency error correction for increased throughput.Lifetime manufacturer limited warranty

These economical Wi-Fi 6 access points provide high‑performance connectivity for any organization experiencing growing mobile, cloud and IoT requirements. With a wireless aggregate data rate of up 1.5 Gbps and gigabit local wired ports, they deliver the range of connectivity options needed for venues such as hotels, residence halls, and remote offices alike..Wireless dual-band (2.4GHz, 5GHz) hospitality access point for hospitality, branch, and teleworker deployments.Compliant with the Wi-Fi 6 standard with up to 1.5Gbps of maximum wireless throughput.Can be powered with 802.3af POE (class 3 or higher) on port E0.Includes an integrated Bluetooth 5.0 Low Energy and Zigbee (802.15.4) radio (2.4GHz) to simplify deploying and managing IoT-based location services, asset-tracking services, security solutions, and IoT sensors.Features 1 x auto-sensing 10/100/1000BASE-T and MDI/MDX RJ45 Ethernet uplink port with 802.3az EEE and 802.3af POE (class 3) support, 2 x auto-sensing 10/100/1000BASE-T and MDI/MDX RJ45 Ethernet ports.Bundle includes: AP-503H, desk mount, power adapter, NA power cord.AP supports direct DC power and Power over Ethernet.Supported frequency bands: 2.4-2.48GHz ISM; 5.15-5.25GHz U-NII-1; 5.25-5.35GHz U-NII-2A; 5.47-5.73GHz U-NII-2C; 5.73-5.85GHz U-NII-3/ISM; 5.85-5.9GHz U-NII-4.Features orthogonal frequency-division multiple access (OFDMA) that handles multiple Wi-Fi 6 capable clients on each channel simultaneously, regardless of device or traffic type for enhanced multiuser efficiency.Patented AI-powered ClientMatch technology eliminates sticky client issues by placing Wi-Fi 6 capable devices on the best available AP.Advanced Cellular Coexistence uses built-in filtering to automatically minimize the impact of interference from cellular networks, distributed antenna systems (DAS), and commercial small cell or femtocell equipment.Target Wake Time establishes a schedule for when clients need to communicate with an AP to improve client power savings and reduce airtime contention with other clients.To simplify policy enforcement, it uses Aruba's Policy Enforcement Firewall (PEF) to encapsulate all traffic from the AP to the Mobility Controller (or gateway) for end-to-end encryption and inspection.Includes security components to help protect user authentication and wireless traffic such as WPA3 and Enhanced Open, WPA2-MPSK, VPN tunnels, Trusted Platform Module, and more.Provides connectivity for a maximum of 256 associated clients per radio (512 in total).Operates as a stand-alone access point or with a gateway for greater scalability, security, and manageability.For hybrid environments, EdgeConnect Microbranch extends the WAN to the small office/home office to deliver a consistent employee experience no matter where users are located.Lifetime manufacturer limited warranty

This kit includes five dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 2333 Mb/s over the 2.4 GHz and 5 GHz frequencies. Both of the 240AC's Gigabit Ethernet ports support 802.3af/at power over Ethernet, allowing you to transfer both data and power over a single cable, which can be passed through to IP cameras and other devices when connected to a compatible switch. Alternatively, you can power the access point with a separately purchased PoE injector..Type of Product/Use: Dual-Band Wireless Access Point.Adapter Speed: 1733 Mbps.Number of ports and Type: 2 Gigabit Ethernet (RJ45) (Uplink) PoE, 1 Ethernet (RJ45) (Console).Dimensions as H 1.5 x W 7 x D 7 in inches.Installation Info: Wall & Ceiling Mountable.Power Rating/Voltage: 13.2 W.Supported Protocols: MAC Filtering, RADIUS.Warranty: Limited Lifetime.Enhance your small-to-midsize business with fast and reliable Wi-Fi connections by connecting the Cisco Business 240AC Dual-Band Wireless Access Point to your compatible network router or switch.

Netgear Insight is a high-performance Wi-Fi 6 access point, perfect for small and medium-sized businesses. The access point is a dual band 4x4 design delivering up to 3.6Gbps total Wi-Fi throughput, supported by a 2.5Gbps Power-over-Ethernet port, an industry leader of performance and cost effectiveness in its product class. Supports the next generation Wi-Fi 6 smartphones, IoT devices, and notebook computers, delivering up to 40% more throughput to each individual device in the 5GHz band and 100% more throughput in the 2.4GHz band, compared to the previous generation equivalent model; provides 4x the client device connection, allowing businesses to serve more customers with better speed and less congestion. This access point is great in high density client device environments such as schools, hotels, restaurants and conference centers, and provides enterprise grade Wi-Fi network security. With Insight management, AP works seamlessly with your current Netgear Insight managed switches, Wi-Fi access points and network storage, and is compatible with previous generation Wi-Fi devices (Wi-Fi 5 802.11ac for example) and Wi-Fi access points..High-performance Wi-Fi 6 access point is perfect for small- and medium-sized businesses.Dual-band 4x4 (2.4GHz and 5GHz) eight streams of data for an aggregate throughput of up to 3.6Gbps.Contains 100/1000/2.5GBASE-T Gigabit Ethernet (RJ-45) ports with Auto Uplink (Auto MDI-X), supporting IEEE 802.3af or 802.3at Power over Ethernet (PoE).Dimensions: 1.35"H x 8.09"W x 8.09"D.Business class Wi-Fi based on next-generation 802.11ax Wi-Fi 6 technology on both 5GHz and 2.4GHz bands, backward compatible with 802.11b/g/n/a/ac.40% more throughput in four-stream 5.0GHz band and 100% more throughput in four-stream 2.4GHz band compared to previous generation.Four times more client device supported.Enterprise security and Enhanced Open security, such as WAP3, WPA Enterprise, 8x SSID, and VLAN.Basic Service Set Coloring (BSS Coloring) enabling significant improvement in radio frequency channel efficiency and reduction of interference.Orthogonal Frequency Division Multiple Access (OFDMA) allowing simultaneous services to multiple devices in the same channel thus improving bandwidth efficiency and reducing latency.Target Wake Time (TWT) allows for more efficient power usage resulting in longer battery life in Wi-Fi 6 client devices.Beamforming+; advanced 6th Gen Wi-Fi technology such as upstream and downstream MU-MIMO.Remote management and monitoring from Netgear Insight app or Cloud Portal for unrivaled management experience of your wireless network.PoE power consumption: 25.5W.Box contains: access point, wall/ceiling mount kit, installation guide, power adapter.5-year manufacturer limited warranty

This affordable Aruba 505 Wi-Fi 6 access point provides high‑performance connectivity for any organization experiencing growing numbers of mobile, IoT and mobility requirements. With a combined peak datarate of up to 1.49Gbps, it delivers the speed and reliability needed for venues and workplaces such as schools, midsize offices and retailers. The 500 Series APs are also designed to optimize user experience by maximizing Wi-Fi efficiency and dramatically reducing airtime contention between clients. Features include Orthogonal frequency-division multiple access (OFDMA), and cellular optimization. With up to 2 spatial streams (2SS) and 80MHz channel bandwidth (HE80), the 500 Series provides groundbreaking wireless capabilities for budget-conscious deployments..Access points provide high-performance connectivity for any organization experiencing growing numbers of mobile, IoT and mobility requirements.Up to 1.49Gbps combined peak datarate.Features an Ethernet port with autosensing link speed (10/100/1000BASE-T), PoE-PD support, and USB 2.0 host interface with Type-A connector capable of sourcing up to 1A/5W to the attached device.Dimensions: 1.46"H x 6.3"W x 6.34"D.Supports direct DC power (12VDC) and Power-over-Ethernet.Indoor, dual radio, 5GHz and 2.4GHz 802.11ax 2x2 MIMO.Featrues WPA3 and Enhanced Open security.Two integrated dual-band down-tilt omnidirectional antennas for 2 x 2 MIMO with peak antenna gain of 4.9dBi in 2.4GHz and 5.7dBi in 5GHz.Built-in technology that resolves sticky client issues for Wi-Fi 6 and Wi-Fi 5 devices.OFDMA for enhanced multi-user efficiency.IoT-ready Bluetooth 5 and Zigbee support.Embedded ranging technology for accurate indoor location measurements