Industrial Ethernet Testers
4 results
The netAlly LinkRunner 10G, is a cost-effective portable Ethernet tester for copper and fiber 10Gig networks that simplifies validation and configuration, and streamlines workflows by combining essential functions into a single, portable, ruggedized unit..Ethernet network tester simplifies validation and configuration, and streamlines workflows by combining essential functions into a single, portable, ruggedized unit.Powered by a Li-ion battery.Offers 2 x RJ-45 Ethernet, 1 x SFP, 1 x USB Type-A, 1 x USB Type-C ports and 1 x Micro SD card slot.Operating temperature 32 to 113 degrees Fahrenheit.Meets or exceeds the CE, Australian Safety and EMC, FCC, and CSA standards.Includes: LR10G mainframe with one year of AllyCare support (LR10G-200-1YS), G3-PWRADAPTER, SFP+MR-10G850, RJ-45 inline coupler, WIREVIEW wire mapper #1, quick start guide, and shoulder sling bag.Install, test, verify, and troubleshoot technology upgrades, Multi-Gig (NBASE-T), and 10G networks with purpose-built hardware.Physical layer testing includes cable (TDR) testing, toning, and wire mapping.Supports LANBERT Media Qualification testing to quickly validate if your existing cable plant can support higher speeds.Compatibility with standards-compliant SFPs enables test and validation of any wired media (copper or fiber).Validate up to 90W 802.3bt PSE with the TruePower loaded Power over Ethernet (PoE) test.Delivers quick results for speedy problem identification and resolution, which reduces downtime and ensures timely network installations
The EtherScope nXG Portable Network Expert is a multi-technology, all-in-one handheld network analyzer that enables engineers and technicians to get more done faster, from deployment to maintenance and documentation of their ever-changing Wi-Fi and Ethernet access networks. With its simple operation, yet in-depth visibility, and the ability to remotely access and control netAlly EtherScope nXG, engineers can now fully enable and leverage the “local hands” of field technicians to expedite problem-solving..Ethernet network tester and Wi-Fi diagnostics tool helps engineers and technicians to quickly deploy, maintain, monitor, analyze and secure Wi-Fi, Bluetooth/BLE and Ethernet access networks.Powered by a Li-ion battery.Offers 2 x RJ-45 Ethernet, 1 x SFP, 1 x USB Type-A, 1 x USB Type-C ports and 1 x Micro SD card slot.Operating temperature 32 to 113 degrees Fahrenheit.Meets or exceeds the CE, Australian Safety and EMC, FCC, and CSA standards.Includes: EXG-300 mainframe (FULL TRI-BAND) with one year of AllyCare support (EXG-300-1YS), Li-Ion battery, G3-PWRADAPTER, SFP+MR-10G850, inline RJ-45 coupler, WIREVIEW 1, quick start guide, and shoulder bag.Quickly install, test, verify, and troubleshoot technology upgrades, NBASE-T, Bluetooth/BLE, and Wi-Fi 6/6E networks with advanced testing apps and purpose-built ruggedized hardware.Empower technicians who may not have access to network management systems or other engineer-level tools to assess and document complex network deployments with multiple VLANs and Wi-Fi SSIDs.Supports both active and passive surveys to help validate client performance and roaming
The Fluke LinkIQ is capable of measuring lengths up to 1000' and provides distance to faults such as opens, shorts, and unterminated cable. The included MS-IE remote adapter identifies miswires and split pairs on RJ45, M12X, M12D, and M8D terminated cables. The LinkIQ qualifies cabling performance from 10 Mb/s to 10 Gb/s for EtherNet/IP, PROFINET, EtherCAT and other Industrial Ethernet protocols, performs ping tests to verify connectivity and also provides nearest switch diagnostics including advertised data rate, switch name and port number and VLAN information, plus PoE and load testing up to Class 8 (90W). Ethernet Alliance PoE Certified for reliable multivendor interoperability. Includes LinkIQ main unit, Remote ID #1-7, IntelliTone Pro 200 Probe, RJ45-RJ45 patch cord (M-F), RJ45-RJ45 patch cord (M-F), Quick Reference Guide, AC charger, RJ45/11 universal coupler, RJ45/M12X patch cord, RJ45/M12D patch cord, RJ45/M8D patch cord, RJ45/11 modular adapter, hanging strap with remote ID holder, and duffle bag carry case..This cable and network tester is capable of measuring lengths up to 1000' and providing distance to fault analysis (opens, shorts, and unterminated cable).Includes remote ID, RJ45-RJ45 patch cord, RJ45-RJ45 patch cord (M-F), AC charger, RJ45/11 universal coupler, RJ45/M12X patch cord, RJ45/M12D patch cord, RJ45/M8D patch cord, RJ45/11 modular adapter.Works on a 3.6V 6400mAh lithium-ion battery.Host interface: USB Type-C.Validate EtherNet/IP, PROFINET, EtherCAT cable performance up to 10GBASE-T.Get connected switch data rate, name, IP address, port number, and VLAN.Detect the PoE class (1-8) and power, and perform a load test.Test connectivity to TCP/IP network through IP configuration and ping.Cable diagnostics including length plus IntelliTone, remotes 2-8.Manage results and print reports from LinkWare PC
The MicroScanner PoE cable verifier validates and troubleshoots your Industrial Ethernet copper cabling, helping to reduce down time in time-sensitive industrial networks. It performs continuity tests on all wires in a few seconds and displays the results graphically, so you can see opens, shorts, and crossed wires. The MicroScanner PoE helps make installation, maintenance, and troubleshooting on IT, security, PoE lighting, Ethernet-based HVAC devices, and IP-based building automation systems easier. Its oversized, backlit LCD screen displays clear results in any light or complete dark with intuitive icons and support of Class 0 to 8 PoE..PoE cable verifier validates and troubleshoots your Industrial Ethernet copper cabling, helping to reduce down time in time-sensitive industrial networks.Works on two AA alkaline batteries.Operating temperature: 32-113 degrees Fahrenheit.Reports PoE class (0-8), injector voltage, switch speed up to 10G.Shows wire map, length, cable ID, and distance to fault.Trace cable or wire pairs with the included IntelliTone Pro 200 probe.Includes Remote IDs to determine network layout quickly
You May Also Like
Overview Introducing the new LinkRunner 10G, the most cost-effective solution for 10 Gig network testing. LinkRunner 10G simplifies testing and configuration of copper and fiber Ethernet networks, streamlining workflows by combining essential functions of installation and triage in a single, ruggedized unit. This next-generation Android-based tester delivers complete network validation and troubleshooting, from the media (copper/fiber) to the application (layers 1 - 7), accelerating deployments, speeding problem identification, and improving the efficiency and effectiveness of network installers and operations teams..Used for validating Ethernet cabling, Multi-Gig/10G connectivity, PoE delivery, and fiber network performance..Package Contents: LinkRunner LR10G-100 tester, AllyCare Support (1 year), power adapter, holster, two SFP+ modules (10G850 & 10G1310), RJ-45 inline coupler, WireView 1–6 identifiers, quick start guide, and medium soft case..Battery powered for portable, all-day network testing in the field..Equipped with RJ-45 ports for LAN and cable testing, SFP+ slot for fiber diagnostics, USB-A and USB-C ports for data and power, microSD slot for storage expansion, 3.5mm audio jack for audio output, and POGO pin connector for docking accessories..Designed to operate reliably between 32°F and 122°F in typical field environments.
The Fluke LinkIQ cable+network tester is the solution to verify cable performance up to 10G and solve network connectivity problems. LinkIQ validates cable performance using frequency-based measurements to calculate maximum bandwidth (10BASE-T to 10GBASE-T), which ensure that tested links meet performance requirements. LinkIQ also performs ping tests to verify connectivity and provides nearest switch diagnostics including advertised data rate, switch name, IP address, port number and VLAN information, plus PoE testing and load test up to Class 8 (90 W). Ethernet Alliance PoE Certified for reliable multivendor interoperability. Additional features include: Cable Toning, Port Blink, Remote Office Locators, and the ability to manage results via LinkWare PC. Includes LinkIQ main unit, remote ID #1-7, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, IntelliTone(TM) Pro 200 Probe, and duffel bag carrying case..This cable and network tester is the solution to verify cable performance up to 10G and solve network connectivity problems.Includes Remote ID #1-7, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, IntelliTone Pro 200 Probe, and duffel bag carrying case.Works on a 3.6V 6400mAh lithium-ion battery.Host interface: USB Type-C.Validate cable performance up to 10GBASE-T via frequency-based measurements.Get connected switch data rate, switch name, IP address, port number, and VLAN.Detect the PoE class (1-8) and power, and perform a load test.Test connectivity to TCP/IP network through IP configuration and ping.Cable diagnostics including length plus IntelliTone, remotes 2-8.Manage results and print reports from LinkWare PC
MS2-FTK MicroScanner copper and fiber cable verifier kit helps find common errors by displaying graphical wiremap, pair lengths, distance to fault, and far-end device. Integrated RJ11, RJ45, and coax test ports support many types of low-voltage cable testing with no need for adapters. Test and verify your fiber connections with the SimpliFiber Pro power meter and light source..Network copper and fiber test kit measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports.Dimensions: 1.4"H x 3"W x 6.4"D.Comes in black and yellow.Kit includes: MicroScanner cable verifier and SimpliFiber Pro (FTK1000) fiber test kit (SimpliFiber Pro optical power meter, 850/1300 multimode source, magnetic strap attachments, carrying case, and SC power-meter adapter).Test connectors: shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs; MicroScanner2: F-connector for coaxial cable.Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs.Features a monochrome LCD with backlight.MicroScanner solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices.MicroScanner PoE: solicits and detects the presence of 802.3af, at, bt, and UPOE (Cisco's Universal Power over Ethernet) compatible PoE devices.MicroScanner2 detects the advertised speed of 802.3 Ethernet ports with speeds of 10Mbps, 100Mbps, and 1Gbps.Verifies media services: 10/100/1000 Ethernet, POTS, and PoE.Tone generator produces 500kHz digital, 400kHz and 1kHz analog tones.Supports toning and cable mapping with a Fluke Networks digital IntelliTone probe
The Fluke Networks® JackRapid™ JR-LEV-2 patented jack termination tool is compatible with Leviton 61110, 5G110 and 6110G. The ergonomically designed handle reduces hand fatigue and offers easy, one-handed operation. It seats and cuts all wires at once and offers high quality, consistent terminations. The tool has replaceable blade head for use with multiple jack types..Fast answers: JackRapid allows you to terminate jacks eight times faster than traditional impact tools with accuracy that''s unmatched.Patented jack termination tool seats and terminates all wires simultaneously.Built in blade cuts off the excess wire after it is seated in the connector, eliminating the need for a secondary trim step.Simple, one handed operation, with an ergonomically designed handle, reduces hand fatigue.Additional information: Replaceable blade head for use with multiple jack types, for leviton 61110, 5G110, 6110G.Unique design easily acco mmodates close to wall installation.Application/usage: Cable termination.Compatibility: PC.Warranty: 18 months limited.Fluke Networks JackRapid Termination Tool - Saves Time
The Fluke Networks network testing device will allow you to keep your network running smoothly. It will allow you to easily test twisted-pair cables and trace installed hidden cables. It uses an easy-to-read LED interface and a two-tone generator to let you know whether it detects any problems or defects..Display type: LED.Interfaces/Ports: 1 x RJ-45.Testing of twisted pair cables for open circuits, shorts, crossed pairs, reversed pairs and split pairs.Easy-to-read fault display.Tone generator for tracing installed cables hidden in walls, floors and ceilings.Remote unit enables one-person testing of installed cables.Micromapper's built-in tone generator works with the IntelliTone™ pro probe or any other analog probe, allowing you to trace cable through walls, floors and ceilings.Micromapper also includes a remote unit that allows one person to test installed cabling or patch cords.MicroMapper quickly and easily tests twisted pair cabling, giving you visibility of opens, shorts, crossed, reversed and split pairs.Just push the TEST button and MicroMapper will automatically scan all wire pairs for any existing faults in your cable.Generation of two tones for tracing cables and lication hidden cables.Includes: Micromapper and Micromapper remote, patch cable, 6 V alkaline battery and user guide.Weight: 0.28 lbs..Dimensions: 4.93"(H) x 2.05"(W) x 1.18"(D).1 year limited warranty.Fluke Networks Network Testing Device - Powerful and Reliable
Fluke MicroScanner PoE cuts through the confusion of your PoE installation by providing swift and simple PoE verification. The tester detects the available PoE class (0-8) in accordance to the latest PoE standards and displays the voltage from passive PoE sources. Everything cable technicians need to know, including available services (up to 10G Ethernet), cable length, wiremap, cable ID, and distance to fault are all shown on the LCD screen. Built-in IntelliTone digital and analog toning precisely locates virtually any cable or wire pair – even on active networks. The ergonomic design features sleek rubber overmold to enhance grip and ruggedness. Includes MicroScanner POE (Power over Ethernet) cable verifier with detachable wiremap adapter, getting started guide (10 languages), two AA alkaline batteries, carry pouch, and one-year warranty..This cable tester PoE cuts through the confusion of your PoE installation by providing swift and simple PoE verification.Includes: getting started guide (10 languages), two AA alkaline batteries, carry pouch.Works on two AA alkaline batteries.Operating temperature: 32-113 degrees Fahrenheit.Display network switch speeds capabilities up to 10G.Locate and trace cable with toning (probe sold separately)
The DSX CableAnalyzer Series copper cable certifiers enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A, 8 or Class FA and I/II. Certifying a cable is one part of a process that starts with system design and ends with system acceptance. The faster that process goes, the more profitable you'll be. Unfortunately, there are a lot of things that slow the process down – setting up the tester incorrectly, testing to the wrong limits, waiting for skilled technicians to analyze and troubleshoot failures, misinterpretation of results, and producing test reports that customers cannot understand..Cable analyzer enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system.Cable analyzer dimensions: 11"H x 5.25"W x 2.63"D.Made of high-impact plastic with shock-absorbing overmold, comes in yellow.Kit includes: versiv mainframe & remote, two DSX-5000 CableAnalyzer modules, set of Cat 6A/Class EA permanent link adapters, set of Cat 6A/Class EA channel adapters, two headsets, two handstrap, two shoulder straps, carry case, USB interface cable, versiv open source software CD, two AC chargers, two universal couplers, integrated Wi-Fi, Statement of calibration and getting started guide.Works on 1000MHz maximum frequency.Standard link interface adapters: shielded RJ45, Tera, GG45.Supported test parameters: wire map, length, propagation delay, delay skew, dc loop resistance, pair-to-pair resistance unbalance, pair resistance unbalance, insertion loss, return loss, common mode return loss, near end crosstalk, far end crosstalk, attenuation-to-crosstalk ratio, acr-f, power sum acr-f/next/acr-n/alien next/alien attenuation next ratio far end, common mode to differential mode next,transverse conversion loss, equal level transverse conversion transfer loss.5.7" LCD with a projected-capacitance touch screen allows for quick tester setup with easily selectable cable types, standards, and testing parameters.Versiv enables users to accomplish more than ever before with a cable tester, by accelerating every step of the testing process.LinkWare Live cloud service lets the project manager remotely set up the testers and monitor job progress and even location from any smart device.ProjX management system eases tasks from initial setup of a job to system acceptance, it eliminates redundant steps and ensures that all tests are completed correctly the first time, and every time.Adaptive user interface puts advanced data analysis and easy setup and operation at the fingertips of technicians of all skill levels.LinkWare PC management software provides unmatched analysis of test results and professional test reports.The DSX reduces the time required to fix cabling faults with dedicated diagnostics, a simple test that locates the problem.Integrated Wi-Fi allows you to easily upload results to LinkWare Live.Meets or exceeds ANSI/TIA-568.2-D, ISO/IEC standards
Versiv modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection.Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards.ProjX system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly.Taptive user interface simplifies set-up, and eliminates errors
The DSX CableAnalyzer Series copper cable certifiers enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A, 8 or Class FA and I/II. Certifying a cable is one part of a process that starts with system design and ends with system acceptance. The faster that process goes, the more profitable you'll be. Unfortunately, there are a lot of things that slow the process down - setting up the tester incorrectly, testing to the wrong limits, waiting for skilled technicians to analyze and troubleshoot failures, misinterpretation of results, and producing test reports that customers cannot understand. As part of the Versiv cabling certification product family, the DSX CableAnalyzer Series copper cable certifiers provides accurate, error-free certification. In the installation business there are multiple teams, varying media types and multiple testing requirements. The difference between being profitable or not is just a few percentage points. The DSX certifies copper cabling, complies with all standards including Level VI/2G accuracy, making jobs easier to manage, and getting to system acceptance faster. It's not just for the expert technicians and Project Managers. Individuals of various skill levels can improve the set-up, operation, test reporting, and simultaneously manage diverse projects..Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection.Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards.ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly.Taptive™ user interface simplifies set-up, and eliminates errors.Analyze test results and create professional test reports using LinkWare™ management software.Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting.Intertek Verified to TIA Level 2G - the most stringent accuracy requirement.Copper cable certifiers endorsed by cabling vendors worldwide.Built in Alien Crosstalk testing capability.Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management Software.
The DSX Cable Analyzer Series copper cable certifiers enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A, 8 or Class FA and I/II. Certifying a cable is one part of a process that starts with system design and ends with system acceptance. The faster that process goes, the more profitable you'll be. Unfortunately, there are a lot of things that slow the process down - setting up the tester incorrectly, testing to the wrong limits, waiting for skilled technicians to analyze and troubleshoot failures, misinterpretation of results, and producing test reports that customers cannot understand. As part of the Versiv cabling certification product family, the DSX Cable Analyzer Series copper cable certifiers provides accurate, error-free certification. In the installation business there are multiple teams, varying media types and multiple testing requirements. The difference between being profitable or not is just a few percentage points. The DSX certifies copper cabling, complies with all standards including Level VI/2G accuracy, making jobs easier to manage, and getting to system acceptance faster. It's not just for the expert technicians and Project Managers. Individuals of various skill levels can improve the set-up, operation, test reporting, and simultaneously manage diverse projects..Versiv modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection.Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards.ProjX system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly.Taptive user interface simplifies set-up, and eliminates errors.Analyze test results and create professional test reports using LinkWare management software
netAlly LinkSprinter 10-second, simple network connectivity test on copper Ethernet links; perfect for frontline/helpdesk staff. Discover the nearest switch name and port information via CDP/LLDP/EDP, and verify link speed/duplex and connectivity to TCP/IP networks. Automate reporting and enable collaboration with test results upload and management via the free Link-Live Cloud Service..10-second, simple network connectivity test on copper Ethernet links.Discover the nearest switch name and port information via CDP/LLDP/EDP, and verify link speed/duplex and connectivity to TCP/IP networks.Automate reporting and enable collaboration with test results upload and management via the free Link-Live Cloud Service.Validate Power-over-Ethernet (PoE) voltage from power sourcing equipment (PSE) according to 802.3af/at standards.View detailed test results, add comments, and run cable tests using your mobile device over a Wi-Fi hotspot
Fluke Networks MS2-100 MicroScanner2 Cable verifier provides revolutionary change in voice, data and video cable without any technician error. Incorporated with RJ11, RJ45 and coax cable test ports that support virtually any type of low-voltage cable testing..MicroScanner2 cable verifier is suitable to verify voice/data/video cable and services.Measures 3"H x 6.4"W x 1.4".Includes 2 AA alkaline battery with run time of 20 hours.Supports twisted pair media for high speed transmission.F connector, RJ-11, RJ-45 interfaces/ports for flexible connectivity.FTP, SSTP, UTP cables for long distance transmission.Distance to fault, Length, PoE, speed test copper cables to 1000Base-T, Wiremap tests, tools and measurements.Requires operating temperature of 32 - 123 deg F, storage temperature of -4 - 140 deg F and 90 % relative humidity.Operates at altitude 4000 m (operating) and 12000 m (storage).Monochrome, backlight LCD display provides brighter images.Length measurement of 11.81" - 1509.19'.Cable tone generator, rubber over mold enhances grip and increases ruggedness.Contains MicroScanner2 cable verifier with main wiremap adapter, multi-language getting started guide, user CD, batteries.Meets N10140 C-Tick EMC standard, FCC Part 15 Class A, CE European Union Directives.Weighs 0.8 lbs.Comes with 1 year warranty.Fluke Networks® MicroScanner2 Cable verifier is capable of verifying voice/data/video cable and services with the help of a revolutionary user interface. Features strong housing.
Fluke Networks® MS2-KIT MicroScanner2 Professional kit includes MicroScanner2 cable verifier with main wiremap adapter, remote identifiers #2-7 and IntelliTone Pro 200 probe. Comprises of shielded twisted-pair RJ45 patch cord, RJ11 patch cord, clip-set RJ45 to 8 alligator clip bare wire adapter and F Coax push on patch cord for effective detection. Comes with accessory soft pouch for user convenience. Features two AA alkaline batteries and a 9 V alkaline battery for long working of the verifier. Kit has MicroScanner2 getting started guide, MicroScanner2 owners CD, IntelliTone Pro getting started guide and IntelliTone Pro owners CD for trouble-free usage of the device. All the components come in a deluxe Fluke Networks carry case for added convenience..MicroScanner2 professional kit is suitable to verify voice/data/video cable and services.Measures 6.4"H x 3"W x 1.4"D.Supports copper media for high speed transmission.F connector, RJ-11, RJ-45 interfaces/ports for flexible connectivity.FTP, SSTP, UTP cables for long distance transmission.Distance to fault, Length, PoE, speed test copper cables to 1000Base-T, Wiremap tests, tools and measurements.Requires operating temperature of 32 - 123 deg F, storage temperature of -4 - 140 deg F and 90 percentage relative humidity.Operates at altitude 4000 m (operating) and 12000 m (storage).Monochrome, backlight LCD display provides brighter images.Locates virtually any cable or wire pair with IntelliTone digital and analog toning.Rubber over mold enhances grip and increases ruggedness.Contains accessory soft pouch, 2 x AA alkaline batteries, 1 x 9 V alkaline battery, MicroScanner2 getting started guide, owners CD.Contains cable verifier with main wiremap adapter, remote identifiers, IntelliTone Pro 200 probe, shielded twisted-pair RJ45 patch cord.Meets N10140 C-Tick EMC standard, FCC Part 15 Class A, CE European Union Directives.Weighs 0.8 lbs.Comes with 1 year warranty.Fluke Networks® MicroScanner2 Professional kit tests voice/data/video cable/services with the help of a revolutionary user interface. Includes essential verification components.
FTK2000 Network Accessory Kit.Networking Accessory.Part Number: FTK2000.Rigid hard shell is coated with scratch resistant finish for high quality durability
The StarTech.com® ST10000SPEXI 1-Port 10G Ethernet network card utilizes the Intel® X550-AT chipset to provide power, performance and enhanced capabilities that is required for dependable network connections. It lets you to add a 10G/5G/2.5G/1G/100Mbps R-J45 Ethernet port to provide network connectivity for high bandwidth workstations and servers. The Intel X550-AT chipset provides advanced features including Intel® Virtualization technology for connectivity and PXE network boot support. It has dual-profile design that allows easy installation into a wide range of computer/server chassis, regardless of form factor..Ethernet network card offers flexible configuration and secure networking to users in a standards-based environment.Dimensions: 4.8"H x 2.7"W x 6"L, Cable length: 3.9".Color: Black.Connectors: One PCI Express x4 male, one RJ-45 female.Data transfer rate: 10 Gbps.Bus type: PCI Express, Card type: Standard Profile (LP bracket incl.).Chipset ID: Intel X550AT.Industry standards: IEEE 802.3an (10GBASE-T), IEEE 802.3ab (1GBASE-T), IEEE 802.3u (100Base-T), NBASE-T (Linux only), PCI Express Rev 2.0.Compatible networks: 10 Gbps/5G/2.5G/1G/100 Mbps.Supported protocols: IEEE 802.3x (Flow Control Support), IEEE 802.1Q (VLAN tagging).LED indicators: One Link/activity, one 10G/1G speed.OS compatibility: Windows 7, 8, 8.1, 10 (64-bit only), Windows Server 2008 R2, 2012, 2012 R2 (64-bit only), 2016, Linux 2.4.x/2.6x/3.x LTS Versions.Includes: One 10G network card, one low-profile bracket, one quick-start guide.Weight: 3.4 oz..Comes with 2 years warranty
The netAlly AirCheck G3 Pro is a cost-effective hardware-enabled wireless analysis and site survey solution for WiFi 6/6E and Bluetooth/BLE networks. Its intuitive user interface provides actionable intelligence, simplifying and speeding up wireless security audits, network deployment, troubleshooting, and validation..Test, verify, and troubleshoot WiFi 6/6E networks and Bluetooth/BLE devices with advanced testing apps and purpose-built hardware.Powered by a Li-ion battery.Offers 2 x USB Type-A, 1 x USB Type-C, 1 x RP-SMA external antenna port.Operating temperature 32 to 113 degrees Fahrenheit.Meets or exceeds the CE, Australian Safety and EMC, FCC, and CSA standards.Includes: AIRCHECK-G3-PRO mainframe with 1 year of AllyCare support (AIRCHECK-G3-PRO-1YS), shoulder sling bag, AC charger, and quick start guide.Validate WiFi 6/6E network performance for critical services and key end devices.Enables remote engineers to troubleshoot and collaborate with on-site technicians with cloud remote control in Link-Live.Seamlessly consolidate and manage field test data, and integrate with network management systems via Link-Live