Internal SATA Enclosures

StarTech 2.5" to 3.5" SATA Hard Drive Adapter Enclosure.Hard drive accessory type: SATA hard drive adapter enclosure.Dimensions: 1.4"(H) x 4"(W) x 5.7"(L).Interfaces: Drive connector: SATA/600.Support for SATA revision I/II/III (1.5/3/6 Gbps), tool less installation, supports 2.5" SSD/HDD up to 12.5 mm in height, standard 3.5" HDD mounting points, material: Aluminum, plastic.Drive connectors: 1 x SATA data and power combo (7+15-pin), host connectors: 1 x SATA data and power combo (7+15-pin).Data transfer rate: 6 Gbps SATA III.Max drive capacity: Currently tested with up to 1TB 7200 RPM hard drives.Operating temperature: 5 - 55 deg C, humidity: 5 - 85%RH.Drive size: 2 1/2", drive installation: Removable.Supports 2 1/2" SSD/HDD up to 12.5 mm in height, SATA revision I/II/III (1.5/3.0/6.0 Gbps).Improve the performance speed of any 3 1/2" hard drive application by adapting a 2 1/2" solid state drive.Tool less installation.I/O expansions: Number of total expansion bays: 1, number of 2 1/2" bays: 1.Includes 1 x 2 1/2" to 3 1/2" SATA HDD/SSD enclosure, 1 x screw kit, 1 x install guide.Weight: 9.2 oz..Warranty: 2 years limited.Startech.com® 2 1/2" to 3 1/2" SATA hard drive adapter enclosure has internal form factor and includes serial ATA/600 drive interface.

Icy Dock® ExpressCage 2.5"/5.25" Internal SATA/SAS HDD/SSD Mobile Rack Enclosure; Black (MB324SPB).Drive fit: Four 2.5" SATA or SAS (single channel) HDD/SSD.Drive bay fit: Single 5.25" half height device bay.Transfer rate: Up to 6 Gbps.Power input: Single 15-pin SATA power port.Drive cooling: 40 mm rear cooling fan.LED indication: Solid blue LED power, blinking blue LED HDD access.Fan speed control: High/low/auto jumper.Dimensions: 1.6"H x 5.5"W x 5.7"D.Supported drive capacity: 2TB.Features metal case with heavy-duty ABS tray and door latch for extended usage.Hot-swappable bays aids for quick drive installation.Removable ExpressTray system aids for tool-less, easy installation comparable to tray-less designs.Active Power Technology (APT) powers up if there is drive installed in the drive bay.Weight: 1.83 lbs..Comes with 3 years warranty

Icy Dock® ExpressCage 2.5"/3.5"/5.25" Internal SATA/SAS HDD/SSD Mobile Rack Enclosure; Black (MB322SPB).Drive fit: One 3.5" device or 3.5" hard drive, two 2.5" SATA or SAS (single channel) HDD/SSD.Drive bay fit: Single 5.25" half height device bay.Transfer rate: Up to 6 Gbps.Power input: Single 15-pin SATA power port.LED indication: Solid blue LED power, blinking blue LED HDD access.Dimensions: 1.6"H x 5.7"W x 5.9"D.Supported drive capacity: 2TB.Enhanced tray and metal housing offers maximum durability.ExpressTray Mini system offers tool-less, easy installation compare to tray-less designs.Great for power users and system builder applications mainly space saving and hot swap usage and for 2.5" HDD or SSD.Active Power Technology (APT) powers up if there is drive installed in the drive bay.Contains user manual and screws.Weight: 458.8 g.Comes with 3 years warranty

65d906e9c95cc2a5af1aca6bb0347ab5.Full steel construction commercially designed for Medical & Military systems, Media servers, and IPCs, approved & used by Tier 1 companies..Perfect for rugged applications and complies to flammability requirements.Fits 4 x 5mm to 15mm 2.5" SAS/SATA HDD or SSD in a single external 5.25" bay for high performance RAID applications..The 1,000:1 contrast ratio produces enhanced sharpness and shading accuracy in each picture

The ExpressCage MB742SP-B brings dense 2.5" SSD or HDD storage to the floppy 3.5" bay. With the rising popularity of SFF (Small-Form-Factor) systems due to space-savings and lower power usage, a convenient and protective data storage enclosure is necessary to maintain the critical data stored in the system. The ExpressTray MB742TP-B drive caddy supports tool-less drive installation, and it has been designed to hold your drives securely, with an enhanced tool-less drive gripping mechanism, stabilized drive insertion design, and a strengthened single-piece latch. The new metal chassis has all-around air ventilation to keep your drives running cool all day, even under heavy load. Space Saver: Utilizing the small space of the external 3.5" drive bay (floppy bay), the MB742SP-B is perfect for applications where space is limited. Small-Form-Factor (SFF) PCs, embedded systems, Box PCs, in-vehicle systems, and home servers can all benefit from this dual 2.5" SAS/SATA drive enclosure. The two drives are also in an ideal position to be used in a RAID setup when combined with a RAID card or software RAID solution. A RAID 1 setup can be used to prevent drive failure, and is excellent for sensitive data, or having a backup of your OS drive. A RAID 0 setup is ideal for applications that require high-speeds, such as in a gaming computer or photo/video editing system. Maximize your speed and security while minimizing your space footprint with MB742SP-B. Innovative New Tray Caddy Design: The ExpressTray MB742TP-B in the MB742SP-B is designed for applications where drive hot-swap is required, while providing security and durability. Grips on the sides of the caddy hold your drives securely, to keep your sensitive data safe. The unique built-in screws allow for entirely tool-less drive installation and removal, to allow for quick and easy swapping of drives. In addition, for applications that require extra stability, we have provided the optional bottom screw holes so you can hold your drives even more securely. The strong, single-piece latch pops out with the press of a button, making it easy to remove your drives. The integrated drive activity light shines solid blue when powered, and flashes blue when the drive is in use, so you know when it's safe to remove your drives. Versatile Utility & Security: We understand that the first priority for any storage enclosure must be security of your data. That's why the MB742SP-B uses a metal enclosure for maximum protection from bumps and drops. The heat-dissipating properties of the enclosure, combined with the amply placed ventilation holes, keep your drives running cool all day, even under heavy load. The ExpressCage MB742SP-B supports both 7-pin SATA and 15-pin SATA power cables with locking latches, so you'll never need to worry about cables unintentionally disconnecting from your enclosure. Once these cables are connected, they'll lock into place and stay that way..Rugged metal housing with durable ABS caddies for maximum security and protection.Fits 2x 5mm, 7mm, & 9.5mm 2.5" SATA HDD/SSDs, and installs into a single 3.5" external bay (floppy bay).Multi-Flow Technology - provides excellent passive cooling.Accommodates 2.5" drives with 5mm, 7mm & 9.5mm height.Active Power Technology (APT) - only powers up if there is drive installed in the drive bay

Introducing the ICY DOCK MB882SP-1S-2B: another milestone in our 2.5" SSD product line. Through manufacturing efficiency, we have managed to redesign the original MB882SP-1S-1B without any sacrifice to our standard of high quality products. The new version is lighter weight for simplicity and cost efficiency. It is very convenient for gamers and power users who expect SSD speed on their home/ office computers. Some other new elements to the converter are viewing slots placed over the SATA connection, allowing the user to verify their HDD or SSD has made a secure connection. This also functions as an extra set of airflow vents for extra cooling with your SSD or HDD. Overall, a lightweight and simplistic design that is perfect for power users, gamers, and average computer users for use in their desktops, media centers, and home servers..Drive Interface: Serial ATA/300.Number of Total Expansion Bays: 1.Number of 2.5" Bays: 1.AMD Radeon R7 M460 Up to 2 GB discrete graphic card provides excellent ability in a variety of multimedia applications and user experiences

Icy Dock® ToughArmor 2.5"/3.5" Internal SATA/SAS HDD/SSD Mobile Rack Enclosure, Black (MB991IKB).Drive fit: Single 2.5" SAS or SATA I/II/III hard drive or SSD (7 - 15 mm height drive).Drive bay fit: 3.5" floppy Drive bay fit.Transfer rate: Up to 6 Gbps per channel.Power input: Single 15-pin SATA power port.Drive cooling: Metal heat dispersion.LED indication: Green device power and amber drive activity.Drive security: Two segment key lock.Dimensions: 1.01"H x 4"W x 5.32"D.Supported drive capacity: 2TB.Features heavy-duty full metal construction and is perfect for use in imaging, medical, military systems, media servers and IPCs.Multi-Flow technology provides effective and excellent passive cooling.Anti-Vibration technology aids to create a safe environment for hard drives or SSDs.Active Power Technology (APT): Individual led only powers up if there is drive installed in the drive bay.RoHS Compliant.Weight: 215 g.Comes with 3 years warranty

4ce2dfc62b7c0832edced395f14f81b6.Provides amazing solution for expanding PC storage.Mounts internally, providing a speedy data transfer for faster and smoother read and write functionality.Number of Total Expansion Bays: 6

Icy Dock® ToughArmor 2.5" Internal SATA/SAS HDD/SSD Mobile Rack Enclosure, Black (MB411SPOB).Drive fit: Single 2.5" SAS/SATA HDD/SSD (SAS host required for SAS drives).Drive bay fit: Slim ODD or slim FDD bay.Transfer rate: Up to 6 Gbps.Power input: Mini 4-pin power wafer.Drive cooling: Metal heat dispersion.LED indication: Solid green LED power, flashing green LED HDD access.Drive security: Eagle-hook locking mechanisms.Dimensions: 0.5"H x 5"W x 5.1"D.Supported drive capacity: 2TB.Features heavy-duty full metal construction for perfect enterprise applications.Multi-Flow technology provides effective and excellent passive cooling.Anti-Vibration technology aids to create a safe environment for hard drives or SSDs.Active Power Technology (APT): Powers up individual LED if only there is drive installed in the drive bay.Contains user manual and screws.Weight: 0.88 lbs..Comes with 3 years warranty

b74bd6dc8da572454e7c4b769d2f43f7.Rugged heavy duty full-metal construction of all internal and external components, commercially designed for Medical & Military systems, media servers, and IPCs, and approved and used by Tier 1 companies..Perfect for rugged applications that must meet flammability requirements..Fits 16 x 5mm to 7mm 2.5" SATA/SAS hard drives or SSDs in 2x external 5.25" bays for high performance RAID applications.

Introducing the Icy Dock ToughArmor ruggedized mobile rack for hot-swapping 2x SATA/SAS SSDs and HDDs or Ultra-Slim 9.5mm CD/DVD/Blu-ray ROM optical disk drive reader for the external 5.25" bay. Featuring industrial full-metal construction inside and out, and designed for commercial applications such as military and medical systems, airborne and shipboard PCs, in-vehicle systems, servers, workstations, and mobile computer systems. Maintain optimal drive temperatures with the user-configurable 40mm cooling fan and plenty of ventilation holes throughout the enclosure. Advanced removable trays with anti-vibration protect drives in harsh environments, and built-in individual status LEDs give you drive updates at a glance..Internal ruggedized mobile rack for hot-swapping 2x SATA/SAS SSDs and HDDs or ultraslim 0.37" CD/DVD/Blu-ray ROM optical disk drive reader for the external 5.25" bay.Dimensions: 1.63"H x 5.75"W x 6.07"D; contains two bays.Designed to support HDDs and SSDs up to 0.59" in height, making them compatible with SAS drives as well as SATA drives.Comes in black.Specifically designed for application in strenuous conditions, such as in military and medical applications, avionics systems, factory and warehouse machinery, or any applications requiring a flammability rating.EZ-slide trays are fully constructed with metal, providing maximum protection to your valuable SSD inside and outside of the unit.Anti-vibration technology built into the tray reduces vibration from mechanical hard drives, reducing noise and protecting drives from vibration damage.Individual LED lights for each bay give you drive status updates at a glance, letting you know when your drives are powered on or in use.User-controllable 1.57" cooling fan works with the ample ventilation holes in the tray and chassis to remove as much heat as possible and keep drives running at optimal temperatures.Dual SATA power connectors separate ODD from HDD/SSD power for stable power delivery.5-year manufacturer limited warranty

Introducing the Icy Dock ToughArmor rugged removable drive bay for 2.5" SATA hard drives and SSDs. Utilizing the standard PCIe 2.0 interface and taking only a single PCIe expansion slot, it gives you an additional hot-swappable drive bay for hard disk drives (HDDs) and solid state drives (SSDs) even when your computer does not have an open SATA port or empty drive bay. Because the single PCIe port handles both power and data, there's no additional clutter from SATA data and power cables. Fully supports hot-swapping drives with its removable drive tray..Rugged removable drive bay for 2.5" SATA hard drives and SSDs.Dimensions: 4.8"H x 6.06"W x 0.87"D.Made of ABS plastic and aluminum in black.Compatible with Mac Pro 2008-2012 models with no driver required.Fits 1 x SATA hard drive or SSD.Uses PCIe 2.0 x1 interface, also supports installation into PCIe 2.0 and PCIe 3.0 x1, x4, x8, and x16 slots.Installs into a single-width PCIe expansion slot.PCIe interface provides both power and data transfer, which ultimately reduces cable clutter.Narrow design allows for multiple bays to be installed side by side in a modular design.Includes full-height PCIe faceplate to protect against the buildup of dust.Strong hot-swap connector rated for a minimum of 10000 insertion/removal cycles.Eagle-hook lock system keeps the drive secure in the enclosure.Anti-Vibration Technology (AVT) reduces noise and protects against environmental damage.Active Power Technology (APT) saves power by shutting the device down when no drive is installed.5-year manufacturer limited warranty

Introducing the Icy Dock ToughArmor ruggedized mobile rack for hot-swapping 6x SATA/SAS SSDs and HDDs or Ultra-Slim 9.5mm CD/DVD/Blu-ray ROM optical disk drive reader for the external 5.25" bay. Featuring industrial full-metal construction inside and out, and designed for commercial applications such as military and medical systems, airborne and shipboard PCs, in-vehicle systems, servers, workstations, and mobile computer systems. Maintain optimal drive temperatures with the user-configurable 40mm cooling fan and plenty of ventilation holes throughout the enclosure. Advanced removable trays with anti-vibration protect drives in harsh environments, and built-in individual status LEDs give you drive updates at a glance..Internal ruggedized mobile rack for hot-swapping 6x SATA/SAS SSDs and HDDs or ultraslim 0.37" CD/DVD/Blu-ray ROM optical disk drive reader for the external 5.25" bay.Dimensions: 1.63"H x 5.75"W x 6.07"D; contains six bays.Designed to support HDDs and SSDs up to 0.59" in height, making them compatible with SAS drives as well as SATA drives.Comes in black.Specifically designed for application in strenuous conditions, such as in military and medical applications, avionics systems, factory and warehouse machinery, or any applications requiring a flammability rating.EZ-slide trays are fully constructed with metal, providing maximum protection to your valuable SSD inside and outside of the unit.Anti-vibration technology built into the tray reduces vibration from mechanical hard drives, reducing noise and protecting drives from vibration damage.Individual LED lights for each bay give you drive status updates at a glance, letting you know when your drives are powered on or in use.User-controllable 1.57" cooling fan works with the ample ventilation holes in the tray and chassis to remove as much heat as possible and keep drives running at optimal temperatures.Dual SATA power connectors separate ODD from HDD/SSD power for stable power delivery.5-year manufacturer limited warranty

dea3cde88bfdbbb5d45ff6f7cd92a511.Provides amazing solution for expanding PC storage.Mounts internally, providing a speedy data transfer for faster and smoother read and write functionality.Number of 2.5" Bays: 4

1834b3cdd46a9feb6df9baafb0998989.Rugged Heavy duty full metal construction with commercially designed for medical &military systems, media servers, workstation, HPCs and IPCs, approved & used by Tier 1 companies.Perfect for rugged applications and complies to flammability requirements.Fits 8 x 5mm to 7mm 2.5" SATA hard drives or SSD's in a single external 5.25" bay for high performance RAID applications.Dual 40mm user-controllable fans, with settings for high, low, and off.Connected by 2x Mini-SAS HD data cables for all 8 bays, for plug-and-play compatibility with most motherboards and RAID cards

Icy Dock TurboSwap rugged full metal single-bay 3.5" SAS/SATA trayless hard drive enclosure designed to fit any 5.25" optical drive bay of the PC cases. This enclosure features a tray-less and tool-less drive installation design for quickly swap out drives without opening the computer case or using tools. The TurboSwap has an individual drive power button and is equipped with a heavy-duty metal door latch for the best drive protection..Single-bay 3.5" SAS/SATA trayless hard drive enclosure designed to fit any 5.25" optical drive bay of the PC cases.Supports one 3.5" SAS/SATA HDD (SAS host is required for the SAS HDD).Installed into any standard external 5.25" drive bay.Housing features a full-metal construction that is suitable for rugged-edge applications and industries that require a flammability rating; comes in black.Equipped with the brand's proven trayless technology: no screws, tools, or trays are necessary to insert or eject the drive.Open-air structure and air vents all around the device offer maximum heat dissipation.Works perfectly with your computer's cooling system and keeps your drive cool even under heavy workloads.Includes four optional mounting holes for an 80mm cooling fan.Features an easy-access drive power button that allows users to shut off the drive to reduce power and drive usage or prevent a hacker or virus attack.Supports SATA 3.0 6Gbps or SAS 3.0 12Gbps (single-channel SAS only).Supports SATA data and power cables with locking latches.Individual drive power button and drive activity light.Meets or exceeds the CE, RoHS, and REACH standards.3-year manufacturer limited warranty

ICYDOCK's latest product for NVMe U.2 SSD brings the next level of ultra high speed storage in a compact package with the ToughArmor MB699VP-B. The ToughArmor MB699VP-B is a ruggedized full metal SSD cage with hot-swappable drive caddies, supporting up to 4x NVMe U.2 SSD in a single 5.25" device bay. Countless Options in a Single Bay: To fully use the speeds of NVMe SSDs, each drive bay uses its own miniSAS HD (SFF-8643) connector, maximizing NVMe U.2 SSD 's potential transfer bandwidth rate of 32Gb/s. The MB699VP-B features hot-swappable EZ slide trays found throughout the ToughArmor series, allowing for easy swaps of U.2 drives and utilizing the hot-swapping function that U.2 SSD natively supports. For extra protection, the EZ-slide trays are fully constructed with metal provided maximum protection to your valuable SSD inside and outside of the unit. Not just the EZ-slide trays are made out of durable metals, the entire unit is also full metal construction, ensuring that the drives are safe and secure while inside the unit. To bring more utility to your hard drives and SSDs, a LED is installed into the front of the mobile rack to provide drive status information at all time when the drive is powered on, off and accessed. Active Power Technology (APT) allows each LED and the cooling fan to be active only when a hard drive is inserted into the enclosure. When the unit does power up, two 40mm cooling fan placed strategically behind the rear panel provide airflow throughout the entire cage cooling all 4 bays effectively and efficiently. With two ball-bearing fans attached and three fan speed settings: high, low and off, depending on the drive usage, user can manually select the proper cooling option accordingly. Never forget which drives belong in what bays. With our individual drive ID labels you'll always know which drive tray belongs in your RAID array or which drive contains certain files. Freely unplug and rearrange them to better suit your configuration or simply remove them for a more simplified look. The ToughArmor MB699VP-B supports 15pin SATA power cables with locking latches so you'll never need to worry about cables unintentionally disconnecting from your enclosure. Once these cables are connected, they'll lock into place and stay that way.Rugged Heavy duty full metal construction with commercially designed for Medical & Military systems, Media servers, and IPCs, approved & used by Tier 1 companies.Perfect for rugged applications and complies to flammability requirements.Fits 4 x 2.5" U.2 NVMe SSD.With 12 USB ports, connect/disconnect devices while not having to shut down the system

The CRU™ DataPort 25 internal SATA/SAS drive enclosure with two 2.5" bays, has rugged all-metal construction for added durability. It is compatible with small PCs, mobile systems, surveillance and unused full-sized floppy bays. It supports PC and MAC platforms. It measures 1" x 4" x 6.1". The drive enclosure supports SATA 2.5" drives, SATA SSD and SAS 2.5" drives..Dimensions: 1"H x 4"W x 6.1"D.Standard floppy power connector, Rated for up to 30000 insertions of the carrier.Number of total expansion bays: 2.Number of 2.5" bays: 2.Compatible drive bay width: 3.5".Host (I/O) Ports: (2) SAS/SATA: up to 6 Gb/s.Drive types supported: SATA 2.5" drives, SATA SSD (solid state drives), SAS 2.5" drives.Construction material: Rugged all-metal construction.Platform supported: PC, MAC.Compatible with small PCs, mobile systems, surveillance and unused full-sized floppy bays.Meets FCC, CE, RoHS and C-Tick certificates and standards.Weight: 0.9 lb.Comes with 5 years warranty.CRU DataPort 25 Internal serial ATA removable drive enclosure supports SATA 2 1/2", SAS 2 1/2" and SATA SSD drives. Suitable for small form factor applications.

Icy Dock EZConvert is a complete solution to convert any M.2 SATA SSD into the exact dimensions and port locations as a standard 2.5" SATA SSD. Designed for compatibility, it accepts all M.2 sizes from 30mm to 80mm in length, mounting them without screws or tools, and allows these drives to be installed anywhere that accepts a bare 2.5" drive, such as a 2.5" drive bay, 2.5" mounting bracket, or in any of ICY DOCK's 2.5" drive enclosures. MB703M2P-B protects the delicate circuit board of your M.2 SSDs from bumps and drops..Complete solution to convert any M.2 SATA SSD into the exact dimensions and port locations as a standard 2.5" SATA SSD.Dimensions: 0.37"H x 2.76"W x 3.98"D.Made of ABS plastic and aluminum in black.Exact same dimensions, port locations, and screw locations as a 2.5" SSD.Accepts any M.2 SATA SSD.Supports full SATA III bandwidth specification (6Gbps).100% toolless and screwless M.2 drive installation.Can be installed into any 2.5" drive backplane, 2.5" drive bay, or USB drive adapter.3-year manufacturer limited warranty

Icy Dock® ToughArmor 2.5"/5.25" Internal SAS/SATA HDD/SSD Backplane Cage, Black (MB994SP4S).Drive fit: Four 2.5" SAS or SATA I/II/III HDD/SSD.Drive bay fit: Single 5.25" half height device bay.Transfer rate: Up to 6 Gbps.Power input: Two 4-pin Molex power port.Drive cooling: 40 mm rear cooling fan x 2 & metal heat dispersion.LED indication: Green device power and amber drive activity.Dimensions: 1.6"H x 5.8"W x 6.7"D.Supported drive capacity: 2TB.Features heavy-duty full metal construction and is perfect for medical, military systems, media servers and IPCs.Suitable for rugged applications and complies with flammability requirements.Anti-Vibration technology aids to create a safe environment for hard drives or SSDs.Active Power Technology (APT): Individual led and cooling fan only powers up if there is a drive installed in the bay.RoHS Compliant.Weight: 1100 g.Comes with 3 years warranty

Icy Dock® ToughArmor EX 2.5"/3.5" Internal SATA/SAS HDD/SSD Mobile Rack Drive Bay Adapter; Black (MB492SKLB).Drive fit: Two 2.5" SAS/SATA HDD/SSD.Drive bay fit: 3.5" front device bay (floppy bay).Transfer rate: Up to 6 Gbps.Power input: Single 15-pin SATA power port.Drive cooling: Metal heat dispersion.LED indication: Solid green LED power, flashing amber LED HDD access.Drive security: Two segment key lock + thumbscrew lock.Dimensions: 1"H x 4"W x 5.4"D.Supported drive capacity: 2TB.Features heavy-duty full metal construction and is perfect for enterprise applications.Multi-Flow technology provides effective and excellent passive cooling.Anti-Vibration technology aids to create a safe environment for hard drives or SSDs.Active Power Technology (APT): Individual led only powers up if there is drive installed in the drive bay.Contains user manual, screws, keys and drive ID plug.Weight: 1.77 lbs..Comes with 3 years warranty

Icy Dock® ToughArmor 2.5"/5.25" Internal SATA HDD/SSD Backplane RAID Cage, Black (MB996SP6SB).Drive fit: Six 2.5" SATA I/II/III SSD or HDD (9.5 mm thickness).Drive bay fit: Single 5.25" half height device bay.Transfer rate: Up to 6 Gbps.Power input: Two 4-pin Molex power port or two 15-pin SATA power port ( with included 4 to 15 pin adapter cables).Drive cooling: 40 mm rear cooling fan with fan switch (High/Low/Off), metal heat dispersion.LED indication: Solid green LED power, flashing amber LED HDD access.Dimensions: 1.6"H x 5.8"W x 5.8"D.Supported drive capacity: 2TB.Features heavy-duty full metal construction and is perfect for medical, military systems, media servers and IPCs.Suitable for rugged applications and complies to flammability requirements.Removable EZ Slide Mini Tray system aids for easy maintenance.Active Power Technology (APT): Individual led and cooling fan only powers up if there is a drive installed in the bay.RoHS Compliant.Weight: 407.5 g.Comes with 3 years warranty

1007967d0f8e56782b99054c8c34909c.Compact in size but massive in performance. Provides sufficient external data storage, with ultra-fast data transfer speeds and configurable modes..Mounts internally, providing a speedy data transfer for faster and smoother read and write functionality.Number of Total Expansion Bays: 6

Icy Dock® MB123SK-1B 3.5" SATAI/II Aluminum Compact Hard Drive Mobile Rack; Black.Drive capacity: 4TB support.Interface/ports: 7pin SATA/300.No. of expansion bays: 1.Structure: Aluminum body with partial plastic.Black.Drive fit: 3.5" SATA 1.5/3/6 Gbps hard drive.Drive bay: 1 x 3.5", 5.25" half-height device bay.Power: Inputs: 4pin Molex power port.LED indication: Device power and drive activity, LED display color: device power: Green, drive activity: Amber.Drive cooling: Aluminum heat dispersion with 1 x rear outtake fan.Black 3.5" SATA hot swap hard drive mobile rack in 5.25" bay offers convenient solution for multi drive exchangeability and maintenance.

Icy Dock® ToughArmor 2.5"/5.25" Internal SAS/SATA HDD/SSD Hot Swap Mobile Rack Cage, Black (MB994SK1B).Drive fit: Four 2.5" SATA or SAS (single channel) HDD/SSD.Drive bay fit: Single 5.25" half height device bay.Transfer rate: Up to 6 Gbps.Power input: Two 4-pin Molex power port.Drive cooling: 40 mm rear cooling fan x 2 & metal heat dispersion.LED indication: Solid green LED power, flashing amber LED HDD access.Drive security: Custom steel lock.Dimensions: 1.6"H x 5.8"W x 6.7"D.Supported drive capacity: 2TB.Features heavy-duty full metal construction and is perfect for use in imaging, medical, military systems, media servers and IPCs.Suitable for rugged applications and complies to flammability requirements.Removable EZ Slide Mini Tray system aids for easy maintenance.Active Power Technology (APT): Only powers up if there is drive installed in the drive bay.Weight: 1.16 lbs..Comes with 3 years warranty

ff244423cfca789cd3ea284efccd5070.Exact same form factor of a slim optical drive..Fits 1 x 5mm to 9.5mm height 2.5" SATA HDD / SSD in a 12.7mm slim ODD bay..Supports transfer speed up to 6Gbps.The receiving SATA connector rated for up to 10,000 drive insertions.Removable EZ Slide Micro drive tray for easy maintenance.

As the leading innovator in 2.5" drive converters, we're often in pursuit of designing the next best thing. With the Icy Dock EZConvert Lite, we took the already proven EZConvert MB882 series converters and maximized the air flow with open air designs that is certainly made to impress. The EZConverter Lite MB882SP-1S-3B converts 2.5 SATA/SAS hard drives or SSD of all heights into an exact form factor of a 3.5" SATA hard drive so you can fit your 2.5" SSD or notebook drive anywhere a 3.5" SATA drive is used (requires SAS host for SAS drives). The EZConvert Lite crafted from one piece construction makes it lightweight yet practically unbreakable –a necessary attribute for high quality system builds. Our open air design and perforated vents help keep your drives nice and cool. Anti-vibration springs help your drives from slight impact yet our drive stabilizing mechanism keeps your drives in place; it strikes a balance to carefully maintain your drives. This converter is made for any consumer or builder looking to add a 2.5" drive to their setup, from gaming rig or media workstation to enterprise data server..Converts 2.5" SATA/SAS hard drives or SSDs of all heights into the exact form factor of a 3.5" SATA hard drive, so you can fit your 2.5" SSD or notebook drive anywhere a 3.5" SATA drive is used.Dimensions: 1"H x 4"W x 5.77"D.Made of ABS plastic and aluminum in black.Featuring EZ-Fit design for anti-shock and optimal drive fit.Open air design with all-around airflow vents for maximum air flow.Completely toolless drive installation for quick and easy setup.Supports 2.5" SAS HDD/SSD with single-channel SAS functions (requires SAS host).Supports SATA 6Gbps or SAS single channel.Universal mounting holes for most common PC cases.Optional screw hole for extra drive security.Perfect for anyone looking to add a 2.5" SATA HDD/SSD to their system.3-year manufacturer limited warranty

504669982eea8dcc9ba6320eb38b1e62.Host Interface: Serial ATA.Drive Interface: Serial ATA, SAS.Number of Total Expansion Bays: 1.The 14" 1920 x 1080 screen provides a great movie watching experience

Icy Dock® TurboSwap 3.5"/5.25" Internal SATA Tray-Less HDD Mobile Rack Drive Bay Adapter; Black (MB171SPB).Drive fit: 3.5" SATA 1.5/3/6 Gbps hard drive.Drive bay fit: 5.25" half height device bay.Transfer rate: Up to 6 Gbps.Power input: 15-Pin SATA power connection.Drive cooling: 80 x 80 x10 mm cooling fan & metal heat dissipation.LED indication: Power (solid blue)/HDD access (flashing blue).Dimensions: 1.6"H x 5.7"W x 6.8"D.Supported drive capacity: 8TB.Features heavy-duty all metal construction for added durability.Locking mechanism aids to protect your data effectively.Front panel fan speed control with drive power button for convenient usage.Shock absorbing anti vibration feature for added protection and long lasting usage.Contains user manual, eight screws and two keys.Weight: 346.3 g.Comes with 3 years warranty

Icy Dock® ToughArmor 2 x 2.5" SATA/SAS HDD/SSD + Slim Optical Disk Drive Mobile Rack; Matt Black.Hard drive accessory type: HDD mobile rack.Black.Dimensions: 1.63"(H) x 5 3/4"(W) x 6.7"(L).Interface: Two 2 x 7pin SATA for each drive bay (SAS dual channel), single 7pin SATA for slim ODD bay.Drive fit: 2 x 2 1/2" SAS/SATA HDD or SSD, one slim type ODD.Material: Aluminum, SECC, drive bay: Single 5 1/4" half-height device bay.Transfer rate: Up to 6 Gbps, form factor: Internal.Power: Inputs: 2 x 4pin Molex power port.LED indicator: Power: Solid green LED (power-on), HDD access indicator: Flashing amber LED.Drive cooling: One 40mm rear cooling fan + fan power switch, metal heat dispersion.Black tougharmor series 2 x 2.5" SATA/SAS HDD/SSD + slim optical disk drive mobile rack is perfect for rugged applications and complies to flammability requirements.

Compatible hard drive caddy (tray) for ICY DOCK ToughArmor MB992 and MB996 series SATA hot swap backplane RAID cage.Drive Interface: Serial ATA/300.Number of Total Expansion Bays: 1.Number of 2.5" Bays: 1.Integrated 2nd Battery, SmartCard, Barcode, Magstripe, Fingerprint, Serial Options and More

As the leading innovator in 2.5" drive converters, we're often in pursuit of designing the next best thing. With the EZConvert Lite MB882SP-1S-3B, we took the already proven EZConvert MB882 series converters and maximized the air flow with open air designs that is certainly made to impress. The EZConverter Lite MB882SP-1S-3B converts 2.5 SATA/SAS hard drives or SSD of all heights (7mm to 15mm) into an exact form factor of a 3.5" SATA hard drive so you can fit your 2.5" SSD or notebook drive anywhere a 3.5" SATA drive is used (requires SAS host for SAS drives). The EZConvert Lite crafted from one piece construction makes it lightweight yet practically unbreakable -a necessary attribute for high quality system builds. Our open air design and perforated vents help keep your drives nice and cool. Anti-vibration springs help your drives from slight impact yet our drive stabilizing mechanism keeps your drives in place; it strikes a balance to carefully maintain your drives. This converter is made for any consumer or builder looking to add a 2.5" drive to their setup, from gaming rig or media workstation to enterprise data server..Drive Interface: Serial ATA/600, SAS.Number of Total Expansion Bays: 1.Number of 2.5" Bays: 1.Useful for the multi-tenant unit and multi-business unit with Layer 4 traffic classifiers and bandwidth limit

Icy Dock® MB153SP-B FatCage 3 x 3.5" In 2 x 5.25" SATA Hot Swap HDD Cage; Black.Drive capacity: 4TB support.Interface/ports: 3 x 7pin SATA.No. of expansion bays: 3.Structure: Metal body with partial plastic.Black.Drive fit: 3 x 3.5" SATA 1.5/3/6Gbps hard drive.Drive bay: 3 x 3.5", 2 x 5.25" half-height device bay.Power: Inputs: 2 x 15pin SATA power.LED indication: Power indicator: Solid green LED (power-on), HDD access indicator: Flashing amber LED.Drive cooling: Replaceable 80 x 80 x 25 mm cooling fan, compatible with most 80mm fans with 2pin/3pin connector, metal chassis heat dispersion.Black FatCage series 3 x 3.5" in 2 x 5.25" hot swap SATA HDD cage is compact and space saving to fit multiple drives.

20a0620c3c8230159808fbc302a89934.Ideal 2.5" mobile rack for system that has tight space constraints such as embedded systems, mobile computers, rackmount computers, rackmount systems, industrial automation control system, military computers and OEM / ODM systems.Ultra small form factor design for maximum space saving.Fits 1 x 7mm to 9.5mm height 2.5" SAS/SATA HDD/SSD in a 12.7mm slim ODD slot or any FDD slot

Removable caddy (tray) with tool-less drive installation design for ICY DOCK ExpressCage MB322SP-B 2 x 2.5" SAS/SATA HDD/SSD mobile rack..Removable caddy (tray) with tool-less drive installation design for ICY DOCK ExpressCage MB322SP-B mobile rack.Made of black plastic with metal pin.Supported drive type: 2.5" SAS and SATA I/II/III hard drive and SSD.Package contents: drive tray and optional screws.3-year manufacturer limited warranty

Icy Dock® ToughArmor 2 x 2.5" SATA Mobile Rack For 3.5" Device Bay; Matt Black.Hard drive accessory type: SATA mobile rack.Black.Dimensions: 25.4 mm(H) x 101.2 mm(W) x 133 mm(L).Interface: 2 x 7pin SATA.Drive fit: 2 x 2 1/2" SATA I/II/III SSD or HDD (9.5mm thickness).Material: Metal, drive bay: 3 1/2" floppy drive bay.Transfer rate: Up to 6 Gbps, form factor: Internal.Power: Inputs: Single 15pin SATA power port.LED indicator: Power: Solid green LED (power-on), HDD access indicator: Flashing amber LED.Drive cooling: Airflow vents with metal heat dissipation.Black SATA mobile rack is able to become more and more advanced and is constantly improving.

Icy Dock® MB991SK ToughArmor 2.5" SATA HDD Mobile Rack For 3.5" Device Bay; Matt Black.Drive capacity: 2TB support.Interface/ports: 7pin SATA.No. of expansion bays: 1.Structure: Full metal.Matt black.Drive fit: Single 2.5" SATA I/II/III HDD/SSD (7 - 15 mm height drive).Drive bay: 1 x 2.5".Power: Inputs: Single 15pin SATA power port.LED indication: Device power and drive activity, LED display color: device power: Green, drive activity: Amber.Drive cooling: Metal heat dispersion.Matt black ToughArmor series 2.5" SATA HDD mobile rack for 3.5" device bay with heavy duty full metal construction is perfect for enterprise applications.

Icy Dock® EZConvert Pro Enterprise Full Metal 2.5" To 3.5" SATA Hard Drive/SSD Converter; Silver.Hard drive accessory type: SATA hard disk drive /SSD converter.Silver.Dimensions: 1"(H) x 4"(W) x 5.77"(D).Interface: SAS, SATA.Drive fit: 3 1/2" SATA hard drive bay.Material: Metal.Transfer rate: Up to 6 Gbps, form factor: Internal.Supports 2TB, extra protection.Perfect for system integrators and IT professionals.Airflow vents for heat dissipation with anti vibration design.Silver SATA hard disk drive /SSD converter is designed using the dimensions, connection locations, and mounting hole positions of a standard 3.5" SATA drive.

StarTech Hard drive converter measures 1" x 3.9" x 5.7" and is designed for 2 1/2" SATA/SAS SSD/HDD to 3 1/2" SATA conversion. Internal converter features Lightweight plastic construction with air vents..Black.Interfaces: SAS, serial ATA.Interface connectors: 1 - SFF - 8482 (29 pin, data and power, internal SAS) receptacle, 1 - SATA data and power combo (7+15 pin) plug.Form factor: Internal.Dimensions: 1"(H) x 3.9"(W) x 5.7"(L).Applications: Install a 2 1/2" hard drive into a 3 1/2" hard drive enclosure or backplane.Lightweight plastic construction with air vents.Supports 2 1/2" form factor hard drives (HDD) and solid state drives (SSD) up to 15 mm in height.Includes: 2 1/2" - 3 1/2" HDD converter.Certifications and standards: RoHS, FCC, CE.Weight: 4.8 oz..Warranty: 2 years limited.StarTech 2.5-to-3.5-Inch Drive Converter - Avoid Buying New Hard Drives

Icy Dock® EZConvert 2.5" To 3.5" SATA SSD/Hard Drive Converter; Black.Hard drive accessory type: SATA SSD / Hard Drive Converter.Black.Dimensions: 1"(H) x 4"(W) x 5.7"(D).Interface: SATA/300.Drive fit: 3 1/2" SATA hard drive bay.Material: Plastic.Transfer rate: Up to 6 Gbps, form factor: Internal.Hot swap.Perfect for system integrators and IT professionals.Airflow vents for heat dissipation with shockproof design.Black SSD and SATA hard drive converter is designed to fit into most common PC cases, 3.5" HDD duplicator, 3.5" SATA HDD enclosure, mobile rack, and backplane modules without having to purchase any attachments for the 2.5" drives.

StarTech.com® Hot swap mobile rack backplane offers optimum drive performance with support for full SATA III/SAS II data transfer speeds up to 6 Gb/s. Enables to maintain ideal drive operating temperatures by maximizing heat dissipation. Built-in fan provides drive cooling and offers excellent heat dissipation with a vented aluminum enclosure to prevent drive failure. Features ejection levers and a key-lock design for a quick and secure installation..Comes with a drive capacity of up to 6TB for better performance.Has 6Gb/s SAS, serial ATA/600 drive interface and 6Gb/s SAS, Serial ATA/600 host interface.Comes with four SFF-8482 (29 pin, data and power, internal SAS) receptacle drive connectors and two SATA power receptacle host connectors.Has power LED, drive 1 activity LED, drive 2 activity LED, drive 3 activity LED and drive 4 activity LED indicators provide status information.Supports four 3 1/2" expansion bays to maximize the internal space of computer case for efficient usage.Comes in black color and has aluminum construction for enhanced durability.Compatible with SAS and SATA and has 5 1/4" wide drive bay for easy replacement.Sleeve fan bearing type and 1 mm - 70 mm fans provide drive cooling.Supports maximum data transfer rate of up to 6 Gbit/s.Delivers peak drive performance with support for full SATA III/SAS II data transfer speeds up to 6 Gb/s.Maintains ideal drive operating temperature by optimizing heat dissipation and discharging built-up heat.Add a hot-swap bay to a server or workstation computer that you can use as a removable backup solution.Onsite data backup secures alternative to cloud storage.Operates at 0 - 55 deg C temperature and 5 - 85 percent RH humidity.Includes 4 drive trayless 3 1/2" SATA/SAS mobile rack, eight installation screws, two drive bay keys and four SATA cables.Meets Green Compliant, RoHS, CE and FCC standards.Weighs 2.9 lbs..Comes with 2 years limited warranty.StarTech.com® Hot swap mobile rack backplane connects has data transfer rate of 6 Gb/s. Features aluminum construction for durability.

2981cee5982b122981107d0c00876f49.Supports docking 1 x 2.5" SAS/SATA HDD/SSD with SATA hot-swap functionality (5mm - 15mm).Fits any external 3.5" bay.Full metal chassis with industrial ABS plastic for full protection to the drive

This SATA 2.5" FIPS 140-2 certified, Kanguru Defender Opal SED300 is a hardware-based self-encrypting drive that provides full disk data security at rest, keeping your operating system locked and protected using state-of-the-art, self-contained implementation, with none of the performance bottlenecks of a software-based encryption platform. The FIPS 140-2 certified Kanguru Opal SED300 provides exceptional data security benefits for organizations looking to meet the toughest compliance standards..Internal self-encrypting solid state drive with SATA interface is a great security solution for Corporate and Enterprise high-security environments.Experience exceptional performance with sequential read speeds up to 550MB/s and sequential write up to 530MB/s; 4K random read up to 99K IOPS and write up to 90K IOPS.Capacity: 500GB (3D TLC NAND technology).Features SmartECC: LDPC + RAID ECC.Form factor: 2.5".Security: TCG Opal version 2 and AES 256-bit hardware encryption.Offer exceptional secure data storage on military-grade hardware-encrypted devices, protecting against data breaches, brute-force attacks, and more.Kanguru Opal commander allows you to manage all aspects of the internal self-encrypting drive from the onboard, dedicated hardware encryption processor.The Kanguru Opal Commander displays key administrative information for your Opal SED300 drive, including drive details, lock status, and drive management.FIPS 197 certified AES 256-bit hardware encryption is the backbone of the Kanguru Opal SED300's security, providing top-tier performance unmatched by software encryption solutions.The "Always On" benefits of AES 256-bit hardware encryption are significant, providing the best encryption module available today.FIPS 140-2 certified (Level 2) ensuring that this drive meets extensive testing and security demands for use in high-security environments.TAA compliant, which is perfect for government purchases, GSA schedules, and meeting certain compliance regulations.Advanced features: Data Loss Protection End-to-End Data Protection, SmartFlush, SmartECC, Cross Die Bad Block Management.3-year manufacturer limited warranty