Modern Work Tables

Safco® Computer desk with 48" wide reversible top features a black steel base for added stability. Computer desk includes full width 6 3/4" deep shelf for added storage and cable routing cutouts for installation along a wall..Steel base/shelf and laminate top construction.30"H x 47 1/2"W x 28"D.Mahogany and Medium Oak finish-reversible top.Create a customized work area by combining different size tables according to space and equipment requirements.Cable routing cutouts for installation along a wall.36" Desk: 30"H x 35-1/2"W x 28"D.Black steel base with full width 6 3/4"D steel shelf and privacy panel.Ready to assemble.Safco® Limited Lifetime Warranty.⚠ WARNING: This product can expose you to chemicals including Di(2-ethylhexyl) phthalate (DEHP), which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/furniture..Safco® Computer desk features a 48" wide reversible top so you can choose mahogany or medium oak finish during assembly.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Safco adjustable height computer workstation has an oak finish and includes a pullout printer and keyboard shelves with PVC on top for durability. This computer workstation with wheels is easy to move and features side panels to hide computer cables for a clean appearance..Adjustable height workstation.Oak, durable powdered coated steel frame.35-49"H x 29 1/2W x 22"D.Adjusts in height from 35" to 49" for stand-up computer work.Decorative molded side panels hide computer cables for a clean appearance.Keyboard shelf extends 9 3/4" and retracts under the work surface when not in use.Work surface: 29 1/2"W x 19 3/4"D.Keyboard Shelf: 22 3/4"W x 13 1/2"D.Mobile on four casters, two locking.Ready to assemble.Safco® Limited Lifetime Warranty.⚠ WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/furniture..The Safco stand up computer workstation has adjustable height and multiple shelves

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.

Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.