SSD Cloning Docks
5 results
The SDOCK2U33RE Dual 2.5/3.5" SATA HDD/SSD duplicator dock lets you duplicate/clone an existing hard drive without the use of a host computer system -- or dock and swap drives from your desktop or laptop computer simultaneously, using a single USB or eSATA port. The SDOCK2U33RE offers convenient dual-function performance. As a hard drive duplicator, the SDOCK2U33RE lets you create an exact sector-by-sector clone from one hard drive to another, including partitions and boot sector information -- ensuring data integrity and consistency for sensitive operations, such as data recovery. As an external hard drive dock the SDOCK2U33RE lets you connect your drives through either eSATA or USB, with each drive slot individually supporting high capacity 2.5/3.5" hard drives or solid state drives, tested up to 4 TB. With support for SATA III (6 Gbps) you can maximize efficiency with duplication speeds up to 22 GB per minute, and eSATA docking speeds up to 6 Gbps. The Dock can also be connected through USB 3.0 with UASP for transfer speeds up 5 Gbps (70% faster than conventional USB 3.0). See our UASP testing results below for further details..Standalone sector-by-sector hard drive duplication with speeds up to 22GB per minute.Supports both 2.5" and 3.5" form factor hard drives (HDD) and solid state drives (SSD).eSATA and USB 3.0 host interface connections.1:1 hard drive duplicator and docking station.Support SATA III (6 Gbps) and UASP for optimal performance.Supports dual drive capacity up to 4 TB per slot (8 TB in total).Compatible with SATA revision I/II/III (1.5/3.0/6.0 Gbps) drives.Compatible with USB 3.0/2.0/1.1 (5 Gbps / 480 Mbps / 1.5 Mbps).Dual bay, top slot-loading design with drive doors.OS Compatibility: OS independent; No software or drivers required.What's in the Box: SATA HDD duplicator dock, USB 3.0 cable, eSATA cable, universal power adapter (NA,UK,EU, ANZ), instruction manual.Clone a 2.5in/3.5in SATA drive without a host computer connection, or dock the drives over USB 3.0 or eSATA for easy access
The StarTech.com SDOCK2U313R standalone duplicator docking station is suitable for 2.5" and 3.5" SATA solid-state drives and hard disk drives. This black dock can duplicate the hard drives quickly at a speed of 25GB per min without any host computer. This dock works with both USB-A, USB-C enabled devices and is compatible with thunderbolt 3 USB-C port devices. This 6TB external serial ATA/600 dock transfers the files at a higher speed. The dock comes with dual-bay top slot tool less and tray less design and has multi-functional LED indicators..6TB drive.Serial ATA/600 drive interface.Power: 1.3 A, 100 - 240 VAC (input), 3000 mA, 12 VDC (output).Duplicate hard drives quickly, without a host computer, at fast speeds of up to 28GB per minute for SSDs.Works with both USB-C and USB-A enabled devices.Black plastic.I/O expansions: 2 x 2.5"/3.5" bays.Dimensions: 2.8"H x 5.2"W x 5.2"D.Interface/ports: USB 3.1.Form factor: External.Bus type: USB 3.1 Gen 2, Chipset ID: ASMedia - ASM1352R.Data transfer rate: 10 Gbps, Duplication speed: 28 GBpm.Connectors: 2 x SATA data and power combo receptacle (drive), 1 x USB 3.1 USB type-B female.LED indicators: Power, mode, 2 x HDD status, clone.UASP support, cooling fan, hot swap capability.Transfer files at high speed between a docked hard drive and a host computer, tool-less and tray-less design.Includes USB 3.1 duplicator docking station, universal power adapter, universal power adapter, USB A to B cable, quick start guide.Meets RoHS, WEEE, FCC, UL, CE standards.Weight: 17.9 oz..Comes with 2 year warranty
The KanguruClone M.2 NVMe SSD duplicator is a high-speed, stand-alone duplicator that can clone up to four ultra-high-performance M.2 NVMe SSDs at once. With copy speeds of up to 12GB/min, this PCIe M.2 duplicator is a fast and cost-effective duplication system, perfect for organizations looking to upgrade their PCs with the new NVMe technology. A full-color, 4.3" TFT touchscreen user interface makes this the easiest-to-use Kanguru duplicator ever! Just attach your master NVMe drive and up to four NVMe solid-state drives and you will be duplicated with just a few taps of the screen. This M.2 SSD duplicator has advanced features for the IT professional, yet the controls are simple enough that even a novice can begin using it within minutes of taking it out of the box..High-speed stand-alone duplicator for cloning high-performance M.2 NVMe SSDs.Just attach your master NVMe drive and up to four NVMe solid-state drives, and the duplication will take you just a few taps on the screen.Supports transfer rates up to 12Gbps.Clones any operating system: Windows, Linux, macOS, and many more.Dimensions: 10"H x 7.5"W x 2"D.With multiple copies and compare modes (Brief, Full, Resize, and Image), secure disk wiping capabilities and robust logging capabilities, great for IT work, backing up NVMe solid-state drives, data wiping, system rollouts, drive testing, and more.Supports all standard M.2 NVMe SSDs.Features a 4.3" full-color TFT touch screen.Supports HPA (Host Protection Area) and DCO (Device Configuration Overlay).1-year manufacturer limited warranty
The KanguruClone M.2 NVMe SSD duplicator is a high-speed, stand-alone duplicator that can clone up to four ultra-high-performance M.2 NVMe SSDs at once. With copy speeds of up to 18GB/min, this PCIe M.2 duplicator is a fast and cost-effective duplication system, perfect for organizations looking to upgrade their PCs with the new NVMe technology. A full-color, 7" TFT touchscreen user interface makes this the easiest-to-use Kanguru duplicator ever! Just attach your master NVMe drive and up to 11 NVMe solid-state drives and you will be duplicated with just a few taps of the screen. This M.2 SSD duplicator has advanced features for the IT professional, yet the controls are simple enough that even a novice can begin using it within minutes of taking it out of the box..High-speed stand-alone duplicator for cloning high-performance M.2 NVMe SSDs.Just attach your master NVMe drive and up to 11 NVMe solid-state drives, and the duplication will be finished with just a few taps on the screen.Supports transfer rates up to 18Gbps.Clones any operating system: Windows, Linux, macOS, and many more.Dimensions: 16.5"H x 14.25"W x 4.75"D.With multiple copies and compare modes (Brief, Full, Resize, and Image), secure disk wiping capabilities and robust logging capabilities, great for IT work, backing up NVMe solid-state drives, data wiping, system rollouts, drive testing, and more.Supports all standard M.2 NVMe SSDs.Features a 4.3" full-color TFT touch screen.Supports HPA (Host Protection Area) and DCO (Device Configuration Overlay).1-year manufacturer limited warranty
Standalone Dual Bay M.2 SATA/NVMe Duplicator/Eraser, HDD/SSD Cloner/Wiper, M.2 PCIe/AHCI, Hard Drive Sanitizer/Copier, TAA.Standalone Dual Bay 1-to-1 duplicator/eraser supports M.2 PCIe NVMe/M.2 SATA AHCI/ 2.5/3.5in SATA HDD / SSD; Clone up to 7.5GBpm.Cloner/Wiper to duplicate between M2 NVMe/SATA and 2.5/3.5" SATA Hard Drive interfaces.Duplicate modes: System/File | All Partitions | Whole Drive | Percentage Duplication.Erase modes: Quick Erase | Full Erase (Single/3-Pass) | Secure Erase (Clear/Purge meets NIST SP 800-88 Rev 1).Upgradeable firmware complies w/future DOD/Government standards; TAA.Hostless Drive Duplicator and Eraser | PCIe M.2 | SATA M.2 | 2.5 in. SATA | 3.5 in. SATA
You May Also Like
This M.2 NVMe drive duplicator with a USB 3.2 Gen2x2 (20Gbps) host port offers high-speed duplication capabilities of up to 90GB per minute, providing efficient and fast cloning of storage devices. High-Speed M.2 NVMe Duplication Clone or duplicate M.2 NVMe solid-state drives (SSDs) without the need for a computer. This device requires no drivers or software and offers high-performance sector-by-sector duplication rates of up to 90GBpm and works with any file format, copying the entire drive..Disc Duplicator Type & Use M.2 NVMe Drive Duplicator, standalone operation..Number of Targets 1:1 duplication (one target)..Hard Drive Interface M.2 NVMe..Platform Compatibility Standalone; no computer required..Software Not applicable; standalone operation..Maximum Read Speed: Up to 1 GB/s..Maximum Write Speed: Up to 1 GB/s..Dimensions: 3 in x 3 in x 1.7 in (L x W x H)..Certification & Standards: CE, FCC, RoHS..Limited Warranty 2 Year
Includes: 1 x SATA duplicator dock, 1 x SATA to IDE adapter, 1 x 40 pin IDE cable, 1 x 44 pin to 40 Pin IDE cable, 1 x eSATA cable, 1 x package of mounting screws, 1 x SP4 to LP4 power cable, 1 x USB 3.0 cable, 1 x instruction manual.Standalone duplicator.Interfaces/ports: USB 3.0.Drive connector: 4 x SATA data and power combo (7+15 pin) receptacle.Host connector: 1 x eSATA (7 pin, data) receptacle, 1 x USB 3.0 B (9 pin, superspeed) female.Drive size: 2 1/2" and 3 1/2".Drive type: SATA.Chipset ID: JMicron - JMB394 + JMS539.Type and rate: USB 3.0 - 5Gbit/s, SATA II (3GB/s).Max drive capacity: Currently tested with up to 4TB 5400 RPM 3 1/2" hard drives per bay (16TB total) and 1TB 5400 RPM 2 1/2" hard drives (4TB total).Insertion rating: 15, 000 cycles.Dimension: 3.3"(H) x 11.4"(W) x 6.7"(D).LED indicators: 4 x drive power/activity.Color: Black.Input voltage: 115 - 240 VAC, Output voltage 12/5 VDC, 6.5A.Temperature: 41 - 176 deg F operating, - 40 - 158 deg F, Humidity: 8% - 90% RH.OS compatibility: Windows 2000/ XP(32/64 bit)/ Server 2003(32/64 bit)/ Server 2008 R2/ vista(32/64 bit)/ 7(32/64 bit)/ 8(32/64 bit), Mac OS X (tested up to 10.8), Linux.Warranty: 2 years limited
Device Type: Solid state / hard drive duplicator.Installed Devices / Modules Qty: 1 (max).Supported Drives: SATA-600 / SAS-2.Localization: Australia, Japan, North America, United Kingdom, Europe.Built-in Devices: Status LCD.Storage Controller:
The high performance KanguruClone 15HD SATA Pro drive duplicator is a high speed, stand-alone SATA drive duplicator that can duplicate up to 15 hard drive or solid state drive copies simultaneously. With ultra-fast copy speeds of up to 12GB/min, the KanguruClone is one of the fastest data duplication systems available. A feature rich LCD makes the duplication process a breeze. Just attach your master drive and up to 15 SATA hard drives or solid state drive targets, and you will be duplicating within seconds. The KanguruClone 15HD SATA Pro drive duplicator has many advanced features for the IT professional, yet the controls are simple enough that even a novice can begin cloning drives within minutes. With multiple copy and compare modes (Brief, Disk, Resize and Ratio), secure disk wiping capabilities and robust logging capabilities, the KanguruClone 15-target SATA HDD/SSD Duplicator is great for IT work, backing up and cloning hard drives and solid state drives, data wiping, large PC deployments, drive testing and more! A new feature of the KanguruClone Pro duplicator series is the ability to resize copy a larger capacity hard drive to a smaller one, or even migrate HDDs to SSDs!.This high-performance tower hard drive cloning machine is a high-speed, stand-alone SATA hard drive duplicator.Can copy up to 15 hard drives or SSDs simultaneously.Hard drive interface: SATA III.Supports all major file systems.Dimensions: 16"H x 9.5"W x 21"D.Features tool-free rack design.Easy-to-use duplicator provides ultrafast copy speeds and multiple copy modes.Great for IT work, backing up and cloning hard drives and solid-state drives, data wiping, large PC deployments, drive testing, and more.1-year manufacturer limited warranty
The high performance KanguruClone 7HD SATA Pro drive duplicator is a high speed, stand-alone SATA drive duplicator that can duplicate up to seven hard drive or solid state drive copies simultaneously. With ultra-fast copy speeds of up to 12GB/min, the KanguruClone is one of the fastest data duplication systems available. A feature rich LCD makes the duplication process a breeze. Just attach your master drive and up to seven SATA hard drives or solid state drive targets, and you will be duplicating within seconds. The KanguruClone 7HD SATA Pro drive duplicator has many advanced features for the IT professional, yet the controls are simple enough that even a novice can begin cloning drives within minutes. With multiple copy and compare modes (Brief, Disk, Resize and Ratio), secure disk wiping capabilities and robust logging capabilities, the KanguruClone 7-target SATA HDD/SSD Duplicator is great for IT work, backing up and cloning hard drives and solid state drives, data wiping, large PC deployments, drive testing and more! A new feature of the KanguruClone Pro duplicator series is the ability to resize copy a larger capacity hard drive to a smaller one, or even migrate HDDs to SSDs!.This high-performance tower hard drive cloning machine is a high-speed, stand-alone SATA hard drive duplicator.Can copy up to seven hard drives or SSDs simultaneously.Hard drive interface: SATA III.Supports all major file systems.Dimensions: 15.5"H x 9"W x 13.5"D.Features tool-free rack design.Easy-to-use duplicator provides ultrafast copy speeds and multiple copy modes.Great for IT work, backing up and cloning hard drives and solid-state drives, data wiping, large PC deployments, drive testing, and more.1-year manufacturer limited warranty
The new, high-performance Kanguru Clone 5HD tower hard drive cloning machine is a high speed, stand-alone SATA hard drive duplicator that can copy up to five hard drives or SSDs simultaneously. With ultra-fast copy speeds of up to 6GB/min, the KanguruClone is one of the fastest cloning systems available. A feature-rich LCD makes the duplication process a breeze! Just insert your master hard drive and up to 5 target hard drives, and you will be duplicating within minutes. The hard drive cloning machine has many advanced features for the IT professional, yet the controls are simple enough that even a novice can begin cloning hard drives within minutes of taking it out of the box. With multiple copy modes including Brief, Disk, Resize and secure disk wiping capabilities, the Kanguru Clone 5HD Tower Duplicator is great for IT work, backing up hard drives, data wiping, large PC deployments, drive testing and more! You can even copy a current small capacity drive to a larger capacity drive with all original content intact!.This high-performance tower hard drive cloning machine is a high-speed, stand-alone SATA hard drive duplicator.Can copy up to five hard drives or SSDs simultaneously.Hard drive interface: SATA II.Supports all major file systems.Dimensions: 15.5"H x 7"W x 10"D.Features tool-free rack design.Supports 3.5" SATA HDDs natively, 2.5" SATA HDDs and SSDs up to 0.37" thick with adapters.Includes two 2.5" to 3.5" HDD adapter cartridges (additional adapters sold separately).Multiple UDMA mode support.1-year manufacturer limited warranty
The new, high-performance Kanguru Clone 11HD tower hard drive cloning machine is a high speed, stand-alone SATA hard drive duplicator that can copy up to 11 hard drives or SSDs simultaneously. With ultra-fast copy speeds of up to 6GB/min, the KanguruClone is one of the fastest cloning systems available. A feature-rich LCD makes the duplication process a breeze! Just insert your master hard drive and up to five target hard drives, and you will be duplicating within minutes. The hard drive cloning machine has many advanced features for the IT professional, yet the controls are simple enough that even a novice can begin cloning hard drives within minutes of taking it out of the box. With multiple copy modes including Brief, Disk, Resize and secure disk wiping capabilities, the Kanguru Clone 11HD Tower Duplicator is great for IT work, backing up hard drives, data wiping, large PC deployments, drive testing and more! You can even copy a current small capacity drive to a larger capacity drive with all original content intact!.This high-performance tower hard drive cloning machine is a high-speed, stand-alone SATA hard drive duplicator.Can copy up to 11 hard drives or SSDs simultaneously.Hard drive interface: SATA II.Supports all major file systems.Dimensions: 16.5"H x 18"W x 7"D.Features tool-free rack design.Supports 3.5" SATA HDDs natively, 2.5" SATA HDDs and SSDs up to 0.37" thick with adapters.Includes two 2.5" to 3.5" HDD adapter cartridges (additional adapters sold separately).Multiple UDMA mode support.1-year manufacturer limited warranty
StarTech® Flash drive duplicator has 64 MB of internal memory and supports both asynchronous and synchronous copy modes. Duplicator saves time by only copying content from a flash drive and supports USB 2.0/ USB 1.1 flash drives..Bus type: USB 2.0.Drive connectors: 3 x USB A (4 pin) female, Buffer size: 64MB, maximum data transfer rate: 1.5GB per minute.Enclosure type: Plastic.Drive type: USB flash drive, color: black, Number of drives: 3, Dive installation: removable.Dimensions: 1.0"(H) x 5.1"(W) x 4.7"(D).Input voltage: 110 - 240 AC, Output current: 2, Output voltage: 5 DC, Center tip polarity: positive, Plug type: H.LED indicator: 3 - green (activity/successful copy), 3 - red (error).Standalone duplicator, no computer required, supports both asynchronous and synchronous copy modes, with 64MB of internal memory, high performance duplication at up to 1.5GB/minute.Check capacity/quality/speed of the connected USB flash drive, lightweight, user-friendly design, integrated LCD display for duplication progress and options menu.Supports duplicating to HDD/ SSD/ SD/ SDHC/ Micro SD/ MMC/ Mini SD/ CF media types through a USB enclosure, dock, or multimedia card reader.Bit-by-bit flash drive imaging/cloning to create an exact replica of a source USB drive onto two target USB drives.Package contents: 1:2 standalone usb 2.0 flash drive duplicator and eraser - flash drive copier, universal power adapter, 3 x power adapter plug (na/ uk/ eu), 1 x instruction manual.Certifications & Standards: Green compliance certificate/authority: RoHS, green compliant.Weight: 6.7 oz..Warranty: 2 years limited.StarTech® Flash drive duplicator has high duplication rate up to 1.5 Gbps and is capable of duplicating two target flash drivers simultaneously.
Expand your storage capabilities with the StarTech M.2 USB 3.2 External SATA Hard Drive Enclosure. Designed for high-speed data transfer, this enclosure supports both PCIe NVMe and SATA M.2 SSDs, offering universal compatibility. The USB 3.2 Gen 2 (10Gbps) connection ensures rapid performance, while the tool-free installation allows for quick and hassle-free setup. Encased in durable aluminum, it provides efficient heat dissipation to protect your SSD. Compact and portable, this enclosure is an ideal solution for on-the-go professionals and tech enthusiasts seeking a reliable external storage upgrade..Compatible w/PCIe M.2 NVMe, SATA AHCI M.2 SSDs.USB 3.2 Gen 2 10Gbps; UASP support; PCI Express 3.0 w/4.0 compatibility.For PCIe (M-Key), SATA (B+M-Key) drives sized 2230/2242/2260/2280; Not compatible with 22110mm.USB Type-C, USB Type-A cables; Tool-less drive installation; Works with Windows, Mac, Chrome, Linux, Ubuntu, iOS (iPhone 15 [Plus/Pro/Max] and up).Portable M2 NGFF SSD Case Adapter with aluminum housing protects SSD and provides heat dissipation
Use this SATA hard drive docking station to gain quick access to two of your 2.5" or 3.5" SATA III SSDs/HDDs - Access two 2.5/3.5” SATA hard drives or solid state drives simultaneously and hot swap drives in and out of this HDD docking station - Dual Bay SATA HDD Docking Station features plug-and-play functionality - Gen 1 USB 3.1 hard drive dock with data transfer speeds of up to 5Gbps (AKA USB 3.0) / SATA docking station / SSD docking station / SATA drive dock / USB3 HDD docking station.Access two 2.5/3.5” SATA hard drives (HDD) or solid state drives (SSD) simultaneously and hot swap drives in and out.USB 3.0 with data transfer speeds of up to 5Gbps.Convenient top-loading design with independent drive doors.Plug-and-play functionality.Easy to set up with no driver or software installation required.Use this SATA hard drive docking station to gain quick access to two of your 2.5" or 3.5" SATA III SSDs/HDDs
Startech.com® USB 3.0/eSATA Docking station hard drive measures 2.8" x 5.2" x 5.6" with serial ATA/600 drive interface and offers removable drive installation. Hard drive supports PC, Mac and Linux platform..Hard drive accessory type: Docking station.Number of total expansion bays: 2, number of 5.25" bays: No, number of 2.5"/3.5" bays: 2.Black.Drive interface: Serial ATA/600, form factor: External, power source: AC adapter, drive installation: Removable, chipset ID: JMicron - JMS562.Host interface: USB 3.0, eSATA, material: Plastic.Input voltage: 120 - 230 VAC, input current: 1.3 A, output current: 3000 mA.Dimension: 2.8"(H) x 5.2"(W) x 5.6"(D).Temperature: 5 to 35 deg C (operating), -20 to 50 deg C (storage), Humidity: 20 to 80%RH.OS compatibility: Windows 8/8.1 (32/64bit), 7 (32/64bit), Server 2008 (32/64), Vista(32/64), Server 2003 (32/64) XP(32/64), 2000, Apple® Mavericks (10.9) OSX Mountain Lion (10.8), Lion (10.7), Snow Leopard (10.6), Linux, Google Chrome™ OS.Compatible with: USB 3.0/2.0/1.1 (5 Gbps / 480 Mbps / 1.5 Mbps).Drive connectors: 2 - SATA data & power combo (7+15 pin) receptacle, Host connectors: 1 - eSATA (7 pin; data) female, 1 - USB 3.0 B (9 pin; superspeed) female.UASP support: Yes, Type and rate: SATA III (6 Gbps).Max drive capacity: Currently tested with up to 4TB 7200 RPM 3.5"Hard drives per bay (8TB total) and 2TB 5900 RPM 2.5"Hard drives (2TB total), Insertion rating: 15000 Cycles.Platform supported: PC, Mac, Linux.Certifications and standards: FCC, CE.Green compliance certificate/authority: RoHS.Package contents: USB 3.0/eSATA to Dual 2.5/3.5in SATA hard drive docking station, 1 x USB 3.0 cable, 1 x eSATA cable, 1 x universal power adapter (NA/UK/EU), 1 x instruction manual.Weight: 1.08 lbs..Warranty: 2 years limited.Startech.com® USB 3.0/eSATA Docking station hard drive in black color is constructed out of plastic material for long durability.
This StarTech USB 3.0 Hard Drive Docking Station delivers full, instant access to any 2.5-inch or 3.5-inch SATA (SATA, SATA II, SATA III) hard drive (HDD) or solid state drive (SSD), without having to mount the drive in a computer or install it in an external enclosure. Large capacity drives (tested with up to 4TB 3.5"" and 1TB 2.5"" drives) greatly enhance your computer's storage/backup capabilities..SuperSpeed USB 3.0 compliant host interface, with transfer rates up to 5Gbps. High Speed USB 2.0 compliant host interface, with transfer rates up to 480Mbps.Supports 2.5" and 3.5" form factor SATA hard drives (HDD) and solid state drives (SSD).Dimensions 2.6"(H) x 3.7"(W) x 5.7"(L).1 Expansion bay.Compatible with SATA revision 1/2/3 (1.5/3.0/6.0 Gbps) drives.Compact, desktop-style form factor in a solid black color.Drive connectors: 1 - SATA data and power combo (7+15 pin) receptacle.Host connector: 1 - USB 3.0 B (9 pin; SuperSpeed) female.Compatible with Microsoft Windows, Apple OSX, Linux, and Google Chrome OS.Certifications and standards CE, FCC, RoHs.2-Year Limited Warranty.A top slot-loading design and unique drive ejection mechanism provides quick and easy access to the data without having to install drives into an enclosure or tray.LED indicators 1 - power and activity (solid - power, blinking - activity); Power 12 VDC, 2.5A.Temperature 41 - 176 deg F operating, -40 - 158 deg F Storage; Humidity 8 - 80 percent RH.OS compatibility Windows 2000 XP (32 64-bit) Server 2003 (32 64-bit) Server 2008 R2 Vista (32 64-bit) 7 (32 64-bit) 8 (32 64-bit), Linux 2.6.31 and up.Insertion rating 15000 cycles.Includes USB 3.0 HDD dock, USB 3.0 cable, universal power adapter, 3 x power adapter plug (NA EU UK), instruction manual.Certifications and standards CE, FCC, RoHs.Warranty 2 years limited.StarTech USB 3.0 SATA II Hard Drive Docking Station is capable of transfer speed up 5 Gbps, making it the fastest way to access data from an external drive.
Startech.com® USB3.0 Dual hard drive docking station measures 2.8" x 5.2" x 5.8" with serial ATA/600 drive interface and offers removable drive installation. Docking station has independent power buttons for each hard drive..Hard drive accessory type: Docking station.Number of total expansion bays: 2, number of 5.25" bays: No, number of 2.5"/3.5" bays: 2.Black.Drive interface: Serial ATA/600, form factor: External, power source: AC adapter, drive installation: Removable, chipset ID: VIA/VLI - VL812, ASMedia ASM1053E.Host interface: USB 3.0, material: Plastic.Input voltage: 120 - 230 VAC, input current: 1.3 A, output current: 3A, output voltage: 12 DC.Dimension: 2.8"(H) x 5.2"(W) x 5.8"(D).Temperature: 5 to 35 deg C (operating), -20 to 50 deg C (storage), Humidity: 20 to 80%RH.OS compatibility: Windows 8/8.1 (32/64bit), 7 (32/64bit), Server 2008 (32/64), Vista(32/64), Server 2003 (32/64) XP(32/64), 2000, Apple® Mavericks (10.9) OSX Mountain Lion (10.8), Lion (10.7), Snow Leopard (10.6), Linux, Google Chrome™ OS.Compatible with: SATA revision I/II/III (1.5/3.0/6.0 Gbps) drives.Drive connectors: 2 - SATA data & power combo (7+15 pin) receptacle, Host connectors: 1 - USB 3.0 B (9 pin; superspeed) female.UASP support: Yes.Max drive capacity: Currently tested with up to 4TB 7200 RPM 3.5"Hard drives per bay (8TB total) and 2TB 5900 RPM 2.5"Hard drives (2TB total), Insertion rating: 15000 Cycles.Platform supported: PC, Mac, Linux.Certifications and standards: FCC, CE.Green compliance certificate/authority: RoHS.Package contents: USB 3.0 to dual 2.5/3.5in SATA hard drive docking station, 1 x 3ft (1m) USB 3.0 cable, 1 x universal power adapter (NA/UK/EU), 1 x instruction manual.Weight: 1.10 lbs..Warranty: 2 years limited.Startech.com® USB3.0 Dual docking station hard drive in black color is constructed out of plastic material for long durability.
The StarTech USB 3.0 standalone eraser dock supports 5 mm, 7 mm, 9.5 mm, 12.5 mm and 15 mm drive heights. It features SATA/300 drive interface for fast transfer speeds. It includes a hard drive eraser and USB 3.0 dock, USB 3.0 cable, universal power adapter, power adapter plug and quick start guide. This eraser dock also supports 2.5" and 3.5" IDE hard drives, mSATA drives and M.2 drives..Supports SATA I and II and large capacity drives and tested with up to 6TB 7200 RPM.SATA/300 drive interface for fast transfer speeds.Color: black, Material: plastic, Interface: USB 3.0, Form factor: external, Bus type: USB 3.0, Compatible drive types: SATA, Number of drives: 2.Supports 5 mm, 7 mm, 9.5 mm, 12.5 mm, 15 mm drive heights and quick erase, 1 - pass full disk overwrite, 3 - pass full disk overwrite erase modes.Features 5 Gbps USB 3.0, 3 Gbps SATA II interfaces, two SATA data and power combo receptacle drive connectors and USB 3.0 B female host connectors.Input/output current: 1.4 A/5 A, Input/output voltage: 110 - 240 VAC/12 VDC, included AC adapter, LED indicators: LCD display on top, activity LED.Offers secure erasing with no host device required.Offers receipt printing for erase confirmation.Supports 2.5" and 3.5" IDE hard drives, M.2 drives and mSATA drives, using a compatible adapter.9 modes of erase including quick and secure erase, single pass overwrite and multi-pass overwrites.Suitable for IT technicians and business professionals who wish to erase the data quickly and securely to repurpose HDDs or SSDs.Designed for system administrators, IT professionals and business administrators who require quick access to drives.Specifically designed for IT technicians who regularly test or benchmark different hard drives and need to swap between them.Dimensions: 5.5"L x 4.8"W x 2.8"H.Temperature: 0 - 40 deg C (operating), -10 - 65 deg C (storage), Humidity: 10 - 90% RH.Includes hard drive eraser and USB 3.0 dock, USB 3.0 cable, universal power adapter, four power adapter plug and quick start guide.Meets RoHS, CE, FC, TAA compliant certifications or standards.Weight: 23.2 oz..Comes with 2-year warranty.The StarTech USB 3.0 standalone eraser dock is compatible with 2.5" and 3.5" SATA drives.
This StarTech 6TB USB 3.1 hard drive single-bay dock features a HDD ejection button that permits fast and simple drive removal. The top-loading design provides easy drive access and multi-function LED indicators for user convenience. It access data from one 2.5 or 3.5" SATA SDD/HDD over ultra-fast USB 3.1 Gen 2. It supports USB 3.1 and UASP with file transfer speeds of up to 6 Gbps. An UASP support provides better performance while USB type-A to B cable for easy compatibility..Drive capacity of up to 6TB for reliable data storage.Features serial ATA/600 drive interface for more efficient data transfer.Operates at 100 - 240 VAC, 0.8 A input and delivers 12 VDC, 2 A output.Made of plastic for durability.Drive size: 2.5".Has external form factor.Supports USB 3.1 Gen 2 with file transfer speed of up to 10 Gbps and SATA III with file transfer speed of up to 6 Gbps.Number of 2.5" bays: 2.Max drive height: 0.4".Features SATA data and power combo receptacle for drive connection.Top-loading design with built-in ejection button for easy drive access, UASP support for enhanced performance.Backward compatible with USB 3.0, 2.0 and 1.x.Back up data quickly to an external drive for archiving.Perfect for system builders and IT professionals who need quick access to drives for imaging.Dimensions: 2.5"H x 3.6"W x 5.7"D.Temperature: 5 - 35 deg C operating, -20 - 50 deg C storage, Humidity: 20 - 80% RH.Includes USB 3.1 HDD dock, USB cable, universal power adapter, 4 power adapter plugs, quick install guide.Meets FCC, CE, RoHS certification and standards.Weight: 14 oz..Comes with 2 years warranty.The StarTech 6TB USB 3.1 hard drive single-bay dock in black, is compatible for use with 2.5"/3.5" SATA SSD/HDD drives.
Startech.com® Standalone 1:5 USB flash drive duplicator and eraser has an easy-to-read LCD display and intuitive 4 button menu operation. Flash drive has asynchronous/synchronous copy modes for quick batch swapping with 64MB of internal memory..6 x USB A (4 pin) female.CD/DVD.Bus type: USB 2.0, Number of drives: 6.Drive type: USB flash drive, Drive installation: Removable.Buffer size: 64MB.Maximum data transfer rate: 1.5 GB per minute.Black, Enclosure type: Plastic.LED indicators: 5 - green (activity/successful copy), 5 - red (error).Input voltage: 110 - 240 VAC, Output voltage: 5 VDC, Output current: 2, Center tip polarity: Positive, Plug type: H.System and cable requirements: Supports copying/cloning to SD/ SDHC/ Micro-SD/ MMC/ Mini-SD/ CF media through a USB multimedia card reader.Dimensions: 1"(H) x 4.7"(W) x 6.6"(L).Built-in LCD display, compact, lightweight design, check drive capacity, quality and speed with intuitive task management.Erases up to 6 USB flash drives with single-pass and multi-pass overwriting/DoD erasing.Includes universal power adapter, 3 x power adapter plug (NA/ UK/ EU), instruction manual.Certifications and standards: CE, FCC, RoHS, TAA compliant.Weight: 11.2 oz..Warranty: 2 years limited.Startech.com® Standalone 1:5 USB flash drive duplicator and eraser features a compact lightweight design for easy carrying and can ensure hassle-free setup as well as control.