Rack Mount Rails

The 2U 14" deep wall mounting bracket for patch panels delivers a sturdy and dependable equipment storage option, allowing you to wall mount data/IT equipment for a more efficient and accessible operating environment. It's the perfect solution for areas where space is at a premium like SoHo (small office, home office) environment, or space limited server room because it doesn't take any floor space. The mounting bracket features an all-steel design and is suitable for mounting patch panels, or other slim 19in equipment to a wall, and to organize cabling or equipment in your network closet, wiring closet, back office, or IDF. The sturdy steel construction is especially helpful for durability and stability. Also, because The open frame wall rack's mounting holes are positioned 16in. apart, allowing you a simple and secure wall-stud anchoring to your existing construction framework. M6 square cage nuts and M6 screws are included with the wall-mount bracket, additionally, M5x25 mounting screws are included to save you the hassle of sourcing separate mounting hardware. The RACK-2U-14-BRACKET is backed by a StarTech.com lifetime warranty and free lifetime technical support..2U WALL MOUNT RACK: This 19-inch wide low profile wall mounted rack has a maximum mounting depth of 14 in (35 cm), recommended for networking equipment up to 12 in deep, leaving 2 in for cable routing; Maximum weight capacity of 77 lbs. (35 kg).EASY TO INSTALL: The 2U wall-mounting patch panel bracket ships fully assembled and comes complete with M6 screws and M6 square cage nuts for easier equipment installation & includes wall mounting hardware; Predrilled wall mounting holes spaced 16" apart.COLD-ROLLED STEEL CONSTRUCTION: The wall mounting rack features a 1/16 in (1.5 mm) thick solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution.EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable opening slot for in-wall cable routing in your network closet, server room, wiring closet, classroom.Durable wall mount rack made of cold rolled steel.STARTECH.COM ADVANTAGE: IT professionals choice for over 30 years; This 2U wall mount rack backed for life by StarTech.com, including free 24/5 North America based multi-lingual tech support.Mount equipment that is up to 14 inches deep, such as patch panels or network switches, to your wall

Innovation 2 Post, 2U kit relay rack mount kit is made of solid steel and has simple installation compatible with 3" uprights. Kit is compatible with many Dell, HP, IBM, other equipment includes hardware..Material: Solid steel construction.Compatibility: IBM x300 server, IBM x305 server, IBM x325 server, IBM x330 server, IBM x335 server, IBM x345 server.Only convert the space you need.2u, 3u, 4u, 5u and 7u.Quick and simple installation.Compatible with many dell, hp, ibm, other equipment.Preferred 2post mount by oem manufacturers.Compatible with 3" uprights.Dimensions: All brackets are 29 1/8" wide, height depends on u size.Weight: 50 lbs.Innovation 2 Post, 2U kit relay rack mount kit is designed to convert the required space.

Startech.com® Standard universal server rack cabinet shelf in black color provides additional storage space for mission critical hardware. Shelf helps to efficiently organize your mission critical computer hardware and accessories..Capacity: Up to 20 kg.Compatibility: 7230CABINET, 2630CABINET.Dimensions: 3.5"(H) x 19"(W) x 15.7"(D) external, 17.4"(W) internal.Rack height: 2U, rack width: 19".Black.Material: Steel.For use with all 19" wide server racks and cabinets.Standard universal server rack cabinet shelf helps to efficiently organize your mission critical computer hardware.Supply additional storage space for mission critical hardware.Includes 1 x fixed shelf for 7230CABINET, 4 x M6 cage nuts, 4 x M6 screws.Certifications and standards: RoHS.Weight: 7.7 lbs..Warranty: Lifetime.Startech.com® Standard universal server rack cabinet shelf in black color is ideal for use with all 19" wide server racks with cabinets and has rugged steel construction for durability.

1U Fixed Server Rack Mount Shelf - 16in Deep Steel Universal Cantilever Tray for 19" AV/Network Equipment Rack - 44lbs (CABSHELF116).DURABLE DESIGN: Heavy-duty cantilever shelf tray that is easy to install, constructed of durable 16 gauge SPCC commercial cold-rolled steel with support for weight up to 44 lbs. with lifetime warranty.FLEXIBLE INSTALLATION: The rackmount shelf can be mounted in multiple orientations to enable flexibility when it comes to install methods, w/lips available on one side to prevent equipment sliding off.INSTALLS IN ANY RACK BRAND: The shelf is fully compatible w/ the full array of StarTech.com server/network cabinets & enclosures (4POSTRACK12U, RK2236BKF) & other brands like: HP, APC, Dell & Lenovo.LIFETIME WARRANTY: StarTech.com offers 24 hour technical support & has been the choice of IT professionals for 30 years, conducting thorough compatibility & performance testing on all products.UNIVERSAL COMPATIBILITY: 19" EIA/ECA-310 compliant 1U 16" deep server rack cabinet shelf for universal fit in any existing server/AV rack or cabinet & includes M6 Cage nuts & screws for mounting shelf.Cantilever Rack Shelf | EIA/ECA-310 Compliant | Lifetime Warranty

The StarTech.com® RDA1U Mounting adapter kit allows you to extend or reduce the mounting depth of 1-rack unit in your server rack by up to 4". This black adapter manages the cables within your rack more easily and supports a total load of 10 lbs..Dimensions: 0.8"H x 1.8"W x 4"D.Comes in black color.Compatible with server racks.Load capacity: 10 lbs. (2 post), 90 lbs. (4 post).Manage cables within rack more easily by changing the depth of your equipment.Includes 2 x depth-adapter brackets, 4 x 10-32 x 5/8 screws, 4 x 10-32 cage nuts, instruction manual.Meets RoHS, WEEE, REACH standards.Weight: 4.1 oz..Comes with 2 year warranty.Rack height: 1U.Comes with 2 years warranty.Black 1U mounting adapter kit supports a total weight load of 90 lbs. in a four post installation, or 10 lbs. in a two post installation.

This shelf is constructed using SPCC commercial grade cold-rolled steel. It is a durable fixed rack shelf that can hold up to 22kg of equipment and is a perfect solution for storing small, non-rackmount equipment, and tools..Dimensions 3 1 2"(H) x 19"(W) x 16"(L).Weight capacity 50 lbs..Frame type Steel.Black.Mounting options Front mount (front only).Supply additional storage space for mission critical hardware and non-rack mount equipment.Material Steel.Vented server rack shelf improves airflow and helps lower temperatures in the cabinet.Universal 19" rack design makes it simple to add a storage shelf to almost any rack or cabinet.Durable steel construction holds up to even the harshest industrial environments.Enclosure thickness 0.1".Rack unit 2U height.Includes 2U fixed rack shelf, 4 x M6 screws, 4 x M6 cage nuts, instruction manual.Certifications and standards CE, RoHs.Warranty Lifetime limited.Silver.Startech.Com® CABSHELF Universal Vented Rack Mount Cantilever Shelf improves airflow and helps lower temperatures in the cabinet.

Organize network and power cables on a 19" rack or cabinet with this StarTech 1U horizontal cable lacing bar with variable depth. Organize cables and reduce cable and connector strain by mounting this lacing bar between rack-mounted patch panels, servers, and NAS devices. Tether cables to the cable management bar using cable ties or hook-and-loop fasteners to enhance the airflow to mission-critical equipment..Organize network and power cables on a 19" rack or cabinet with this 1U horizontal cable lacing bar with variable depth.Can be installed inwards or outwards relative to the rack mounting posts for optimal cable routing, reduced clutter, and improved airflow.Dimensions: 1.7"H x 19"W x 3.8"D.Box contains: lacing shelf, four M6 screws, four M6 cage nuts, four M6 plastic washers, four M4 screws, quick start guide.Horizontal cable lacing crossbar allows for variable depth of the horizontal bar relative to the rack mounting posts (depth adjustable from 1.5" to 3.7"; fixed side bracket depth of 3.78").Use with patch panels, servers, switches, NASs, PDUs, KVMs, and more.Eliminate sharp cable bends at connector ends and alleviate port/connector stress by securing the cables.Features lacing points spaced 0.3" along the cable guide bar.SPCC steel construction allows the cable support bar to bear the load of all cable/cable bundle types.Powder-coated black finish for long-term durability.2-year manufacturer limited warranty

The Cisco NXK-ACC-KIT-1RU is a rack mount bracket kit specifically designed for Cisco Nexus switches, including the 92160YC-X, 92300YC, and 92304QC models. This highly functional accessory conveniently installs your switch in a standard 1RU (rack unit) configuration. With its sturdy construction and easy-to-use design, this kit ensures secure mounting of your Nexus switch within any compatible rack system. Properly positioning your network equipment using this bracket kit can optimize space utilization while ensuring efficient cooling and cable management. The suitability of this product for specific Cisco switches guarantees compatibility without compromising performance or stability. You will be able to make full use of all available features on these powerful networking devices by deploying them alongside the recommended accessories like the NXK-ACC-KIT-1RU..Rack mount kit is designed for the select Cisco switches.Designed For:Nexus 92160YC-X, 92300YC, 92304QC, 9236C, 9272Q, 93108TC-EX, 93108TC-FX, 93120TX, 93128TX, 93180LC-EX, 93180LC-FX, 93180YC-EX, 93180YC-FX, 93240YC-FX2, 9332C, 9332PQ, 9336C-FX2, 9336PQ, 9348GC-FXP, 9364C, 9372PX, 9372PX-E, 9372TX, 9372TX-E, 9396PX, 9396TX.Kit contains two front brackets, two rear brackets, two slider rails, six M4 Phillips pan-head screws.Built on Cisco silicon, the Cisco Nexus 9000 series switch delivers industry-leading data center performance from the inside out. Reduce operational costs with unified ports supporting 10/25G Ethernet and 8/16/32G Fibre Channel, RDMA over converged Ethernet (RoCE), and IP storage.

2-Post Server Rack Shelf - Center Mount - 19 Inch -2U - Black - Supports up to 75 lb. (34 kg) - Vented (CABSHF2POSTV2).Fits most standard 19" 2 post racks.Mid-mount design.Supports up to 75 lb. (34 kg) of equipment.2 Post Network Rack shelf | Black | 75 lb. (34 kg)

The centered rack shelf can hold up to 200 lbs. (91 kg) of equipment and is constructed using 1/16 in (1.5 mm) thick SPCC commercial-grade cold-rolled steel for long-term durability and sturdiness. Accommodate your accessories or non-mountable devices for ease of access or connectivity to your equipment. Conveniently includes M6 square cage nuts and M6 screws to set it up in no time. The SHELF-2U-20-CENTER-V is backed by a StarTech.com lifetime warranty and free lifetime technical support..UNIVERSAL 19'' FIT: This 2U center-mounted vented server rack shelf is designed to fit 2-post EIA-310 compliant 19 in server racks and can accommodate an internal depth of 20in (50.8 cm) for your data, IT, networking, or other non-rack mountable equipment.CENTER MOUNT SHELF: The center-mount design allows for easy access to the front and back of the equipment, allowing for simple installation, maintenance and cable routing.DURABLE DESIGN: Constructed with 1/16 in (1.5 mm) thick SPCC commercial cold-rolled steel, the sturdy rack shelf ensures long term durability and supports a total weight of 200 lbs. (91 kg) making it the perfect rack shelf for any environment.MAXIMIZE VENTILATION: The vented shelf plate on the cantilever rack shelf helps to improve airflow to effectively dissipate heat away from your equipment.STARTECH.COM ADVANTAGE: IT professionals’ choice for over 30 years, this 2U vented server rack shelf is backed for life by StarTech.com, including free lifetime 24/5 multi-lingual technical assistance.The SHELF-2U-20-CENTER-V lets you add 2U 20 inches (50.8 cm) deep shelf to any 2-post EIA-310 compliant 19-inch rack.

2.5 SSD/HDD Mounting Bracket for 3.5 Drive Bay - 5 Pack - Tool-less - Hard Drive Mounting Kit (BRACKET125PTP).Compatible with most 2.5" SSD/HDD drives including: IDE, SAS, SATA, U.2 and more.Install one 2.5” SSD or HDD into a single 3.5” bay.Supports drives 7 mm or 9.5 mm in height.Tool-less drive and bay installation.2.5" Hard Drive Mount | Tool-less Installation

This server rack provides 24U of storage space in a sleek, secure cabinet for storing standard 19" rack-mount devices such as Dell®, HP® and IBM® servers, along with telecommunication and A/V equipment. The rack is compatible with EIA-310 compliant equipment and supports a total load capacity of 450 kg (992 lb.).Hassle-free equipment installation. This rack includes a variety of features that enable you to easily incorporate plenty of equipment. With adjustable mounting rails, you can easily change the rail depth from 3" up to 30.7" (76.2 mm - 780 mm) to ensure compatibility your standard rack-mount equipment. The added depth also provides support for additional cable and power management behind your equipment..Easy rack-mount equipment installation.Keeps your rack-mount equipment secure with lockable doors.Keep your equipment at an optimal temperature with passive cooling

This adjustable rackmount shelving system supports 1U UPS systems as well as other 1U pieces of networking or power protection equipment. It offers a 4-post expandable mounting rails in the front to rear support for equipment with 17 1/2-inch wide rectangular chassis..Dimensions 1.72"(H) x 1.49"(W) x 20 1 2"(L).Weight capacity Up to 150 lbs..Silver.Maximum adjustable depth 36".Adjustable to any length between 20 1 2" and 36".Square hole rack attachment hardware included.Includes left rail pieces - a front and a rear, right rail pieces - a front and a rear, 10 - M6 screws, 10 - M6 washers, installation guide.Warranty 5 years limited.Tripp Lite SmartRack™ 4POSTRAILKit1U Rack Mount comes with rails that can be adjusted to any setting between 20.5" and 36".

The Cisco 1000 series Integrated Services Routers (ISR 1000 Series) portfolio has been steadily expanding over the years to provide customers with the flexibility they need. The ISR 1000 Series combines routing, switching, Wi-Fi, integrated security, and DSL and LTE uplink connectivity options in a single, lightweight, high-performance device. Choose between the traditional Cisco IOS® XE or controller-managed Cisco IOS XE SD-WAN software to deploy your network quickly and reliably on all Cisco ISR 1000 Series routers. With a simple and flexible pay-as-you-grow model, you purchase network capacity only when you need it..COMPATIBILITY: For use with all Cisco 111X Series Integrated Service Routers.HARDWARE: Includes all necessary hardware to mount the router in a rack or to a wall.SIZE: Rack mount is 1 RU and includes space for the router’s power supply.COMPACT: Cisco 111X Series ISRs are ideal for environments where space, heat dissipation, and low power consumption are critical factors.PEACE OF MIND: 1-year limited warranty

This heavy duty rack can be adjusted from 19 1/2-inch to 38inch to fit your rack. It is constructed using 1.0mm SPCC commercial grade cold-rolled steel, providing the ability to hold up to 80kg (175lbs) of equipment..Adjustable Mounting Depth: Easily fits a wide range of server racks and cabinets with adjustable brackets from 19.5" to 38"..Heavy-Duty Load Capacity: Supports up to 80kg (175 lbs) of mission-critical hardware and non-rackmount equipment..Universal 19” Rack Compatibility: Designed for standard 19" server racks with a 1U height profile..Durable Steel Construction: Built with 1.0mm SPCC cold-rolled steel for long-lasting performance in industrial environments..Front-Mount Installation: Simple front-only mounting for quick and secure setup..Optimized Ventilation: Vented design promotes airflow to help maintain optimal operating temperatures for your equipment..Dimensions: 1.7" (H) x 19" (W) x 27.6" (L).Supports up to 175 lbs. (80 kg) of equipment - ideal for heavy servers, UPS systems, and non-rackmount gear in demanding IT or industrial environments..Commercial-grade steel with black powder-coated finish.Mounting Options: Front mount only.Rack Unit: 1U.Enclosure Thickness: 1.0 mm.Rack unit 1U height.Certifications: CE, RoHS Compliant.Warranty Lifetime limited.What's in the Box: 1 x Adjustable Vented Rack Shelf, 2 x Rear Mounting Brackets, 8 x M5 Panel Screws, 1 x Instruction Manual.Startech ADJSHELFHDV Vented Server Rack Cabinet Shelf has an adjustable mounting depth bracket that makes it simple to add a storage shelf to a wide variety of racks or cabinets.

Install this set of five 1U Vertical Cable Management Hooks internally/externally along the posts of a standard 19" 2/4-post server rack, to organize power and network cables..The cable D-ring organizer features a 0.4 in. (11mm) opening to effortlessly insert bundled cables..This cable guide for racks and cabinets is constructed of steel and is compatible with any rack post that features 1U standard rack spacing..Improve cable organization and promote better airflow with this durable D-ring patch panel organizer.Designed and built for IT Professionals, this 5-pack of 1U server rack cable managers is backed by a 2-Year warranty