SATA to HDD Adapter

StarTech 2.5" to 3.5" SATA Hard Drive Adapter Enclosure.Hard drive accessory type: SATA hard drive adapter enclosure.Dimensions: 1.4"(H) x 4"(W) x 5.7"(L).Interfaces: Drive connector: SATA/600.Support for SATA revision I/II/III (1.5/3/6 Gbps), tool less installation, supports 2.5" SSD/HDD up to 12.5 mm in height, standard 3.5" HDD mounting points, material: Aluminum, plastic.Drive connectors: 1 x SATA data and power combo (7+15-pin), host connectors: 1 x SATA data and power combo (7+15-pin).Data transfer rate: 6 Gbps SATA III.Max drive capacity: Currently tested with up to 1TB 7200 RPM hard drives.Operating temperature: 5 - 55 deg C, humidity: 5 - 85%RH.Drive size: 2 1/2", drive installation: Removable.Supports 2 1/2" SSD/HDD up to 12.5 mm in height, SATA revision I/II/III (1.5/3.0/6.0 Gbps).Improve the performance speed of any 3 1/2" hard drive application by adapting a 2 1/2" solid state drive.Tool less installation.I/O expansions: Number of total expansion bays: 1, number of 2 1/2" bays: 1.Includes 1 x 2 1/2" to 3 1/2" SATA HDD/SSD enclosure, 1 x screw kit, 1 x install guide.Weight: 9.2 oz..Warranty: 2 years limited.Startech.com® 2 1/2" to 3 1/2" SATA hard drive adapter enclosure has internal form factor and includes serial ATA/600 drive interface.

Kanguru 2.5" SATA to 3.5" SATA adapter cartridges enable you to duplicate 2.5" SATA hard drives (up to 9.5mm thickness) using your KCLONE-5HD-TWR and KCLONE-11HD-TWR model Kanguru Clone hard drive duplicators..Duplicate 2.5" SATA laptop drives (up to 9.5mm thickness).Comes in black.Device type: storage bay adapter

The Pluggable Technologies USBC-SATA-V 2nd generation USB 3.1 SATA vertical hard drive dock is the first to introduce USB-C connectivity and performs at 10 Gbps throughput. This dock provides universal USB compatibility, supports all 2 1/2" and 3 1/2" SATA hard drives and is compatible with Windows, Mac and Linux operating systems. The dock also features a sturdy single-bay upright design that provides maximum cooling in a compact footprint. Robust on/off power toggle switch helps in preventing accidental shutoff and the blue LED provides information about power state and drive activity..Number of total bays: 1.SATA hard drive dock to introduce USB-C connectivity and SuperSpeed+ USB 3.1 Gen 2 performance up to 10Gbps (1,250Mbps).Provides universal USB compatibility with two included USB cables.Sock supports all 2 1/2" and 3 1/2" SATA hard drives on the market and is Windows, Mac and Linux compatible.USB 3.1 Gen 2 SATA vertical hard drive dock features a sturdy single-bay upright design that provides maximum cooling in a compact footprint.Blue LED provides at-a-glance information about power state and drive activity, robust on/off power toggle switch helps prevent accidental shutoff

Icy Dock® ToughArmor EX 2.5"/3.5" Internal SATA/SAS HDD/SSD Mobile Rack Drive Bay Adapter; Black (MB492SKLB).Drive fit: Two 2.5" SAS/SATA HDD/SSD.Drive bay fit: 3.5" front device bay (floppy bay).Transfer rate: Up to 6 Gbps.Power input: Single 15-pin SATA power port.Drive cooling: Metal heat dispersion.LED indication: Solid green LED power, flashing amber LED HDD access.Drive security: Two segment key lock + thumbscrew lock.Dimensions: 1"H x 4"W x 5.4"D.Supported drive capacity: 2TB.Features heavy-duty full metal construction and is perfect for enterprise applications.Multi-Flow technology provides effective and excellent passive cooling.Anti-Vibration technology aids to create a safe environment for hard drives or SSDs.Active Power Technology (APT): Individual led only powers up if there is drive installed in the drive bay.Contains user manual, screws, keys and drive ID plug.Weight: 1.77 lbs..Comes with 3 years warranty

The Sabrent black hard drive enclosure features durable aluminum construction to ensure heat dissipation and protects the drive from overheating. It comes with 2 1/2" Serial ATA/SATA notebook hard drive that connects to your computer externally through USB 3.0 port 5 Gb/s speed. Hard drive is compatible with Windows 2000/XP/Vista/7/8 and Mac OS 9.1/10.8.4 above operating systems. It has tool free design that ensures easy installation. This enclosure is perfect for data transfers or data backup and supports plug and play feature for convenient usage..Features SATA/600 drive interface for optimum performance.Comes in black color.Perfect for 2 1/2" SATA/SSD, Supports 7 mm/9.5 mm thickness HDD.Number of total expansion bays: 1, Number of 2 1/2" bays: 1, Host interface: USB 3.0.Has external form factor.Compatible with Windows 2000/ XP/Vista/ 7/ 8 and Mac OS 9.1/10.8.4 above operating systems.Features tool free design that ensures easy installation.Plug and play feature for easy use.Optimized for SSD and supports UASP SATA III.Includes USB 3.0 cable and manual

Introducing the ICY DOCK MB882SP-1S-2B: another milestone in our 2.5" SSD product line. Through manufacturing efficiency, we have managed to redesign the original MB882SP-1S-1B without any sacrifice to our standard of high quality products. The new version is lighter weight for simplicity and cost efficiency. It is very convenient for gamers and power users who expect SSD speed on their home/ office computers. Some other new elements to the converter are viewing slots placed over the SATA connection, allowing the user to verify their HDD or SSD has made a secure connection. This also functions as an extra set of airflow vents for extra cooling with your SSD or HDD. Overall, a lightweight and simplistic design that is perfect for power users, gamers, and average computer users for use in their desktops, media centers, and home servers..Drive Interface: Serial ATA/300.Number of Total Expansion Bays: 1.Number of 2.5" Bays: 1.AMD Radeon R7 M460 Up to 2 GB discrete graphic card provides excellent ability in a variety of multimedia applications and user experiences

Icy Dock® TurboSwap 3.5"/5.25" Internal SATA Tray-Less HDD Mobile Rack Drive Bay Adapter; Black (MB171SPB).Drive fit: 3.5" SATA 1.5/3/6 Gbps hard drive.Drive bay fit: 5.25" half height device bay.Transfer rate: Up to 6 Gbps.Power input: 15-Pin SATA power connection.Drive cooling: 80 x 80 x10 mm cooling fan & metal heat dissipation.LED indication: Power (solid blue)/HDD access (flashing blue).Dimensions: 1.6"H x 5.7"W x 6.8"D.Supported drive capacity: 8TB.Features heavy-duty all metal construction for added durability.Locking mechanism aids to protect your data effectively.Front panel fan speed control with drive power button for convenient usage.Shock absorbing anti vibration feature for added protection and long lasting usage.Contains user manual, eight screws and two keys.Weight: 346.3 g.Comes with 3 years warranty

This slim, pocket-sized drive enclosure is specifically engineered for 7mm drives, giving you the option to turn your thin hard drive or solid state drive into an external storage solution connected through UASP-enabled USB 3.0. With a thin yet durable design, the enclosure fits your 7mm drives perfectly to eliminate any drive movement inside the enclosure, which could be a problem with a looser-fitting enclosure. To help save you time transferring data to and from your 7mm SSD or HDD, this UASP-enabled enclosure supports transfer speeds up to 70% faster than traditional USB 3.0, when used with a UASP-enabled host computer. Plus, the enclosure is USB-powered, so you don’t have to carry a power adapter with you, giving you one less thing to pack when you’re travelling. To ensure compatibility with your computer system, the S2510BPU337 supports all of the leading operating systems, including: Microsoft Windows® (8/7/Vista/XP/Server 2008/Server 2003), Apple® OSX (10.9/10.8/10.7/10.6), Linux, and Google Chrome OS™..Compatible with 2.5" SATA III SSD and HDD drives up to 2TB.Enclosure connects to your computer via USB 3.0.USB powered, no external power adapter required.Compatibility: Mac, PC.Material: Plastic.Color: Black.Weight: 0.08 lbs..Warranty: 3 Years.Turn a 7mm high 2.5in SATA III SSD/HDD into a UASP-supported USB 3.0 External Drive

The Tripp Lite U357-025-UASP black external 2 1/2" SATA hard drive enclosure features 6 Gbps Serial ATA/600 for faster data reading and writing capability. It is suitable for your laptop, netbook or notebook computers. This hard drive has SuperSpeed USB 3.0 type A male connector on first end and 22-pin SATA + power female connector on second end for reliable connectivity. It is backward compatible with USB 2.0 and USB 1.1 interfaces. It transfers data at the rate of 5 Gbps through USB 3.0 interface. The protective cover keeps SATA drive free of dust. It incorporates blue LED that indicates successful data transfer. This hard drive requires no software, drivers or external power supply..Color: Black.Connections: SuperSpeed USB 3.0 type A male connector on first end and 22-pin SATA + power female connector on second end.I/O expansions: One 2 1/2" bays.Drive interface: 6 Gbps Serial ATA/600, Form factor: External.System requirements: Device with USB port, UASP-enabled host controller required for UASP performance, 2 1/2" SATA HDD.Backward compatible with USB 2.0 (480 Mbps) and USB 1.1 (12 Mbps) transfer speeds.Supports USB 3.0 data transfer rates up to 5 Gbps.Works up to 70 percent faster when connected to UASP host controller.Protective cover keeps SATA drive free from dust.Requires no software, drivers or external power supply, blue LED indicates successful data transfer.Ideal for storing large files like photos, music and video files and sharing them on your laptop, netbook or notebook.Includes 1' USB 3.0 Micro-B cable and owner's manual.RoHS Compliant.Comes with 1 year limited warranty.Device Type: Storage enclosure - external.Bus Type: USB 3.0.Expansion Bays: 1 x internal - 2.5".Hard Drive Form Factor Compatibility: 2.5".Features: Power indicator.Interface: SATA 6Gb/s.Data Transfer Rate: 600 MBps.Supported Devices: Hard drive.Max Storage Devices Qty: 1.Power Source: USB bus.System Requirements: Apple MacOS, Linux, Microsoft Windows.USB 3.0 SuperSpeed External 2.5 in. SATA Hard Drive Enclosure with Built-In Cable and UASP Support

Icy Dock EZConvert is a complete solution to convert any M.2 SATA SSD into the exact dimensions and port locations as a standard 2.5" SATA SSD. Designed for compatibility, it accepts all M.2 sizes from 30mm to 80mm in length, mounting them without screws or tools, and allows these drives to be installed anywhere that accepts a bare 2.5" drive, such as a 2.5" drive bay, 2.5" mounting bracket, or in any of ICY DOCK's 2.5" drive enclosures. MB703M2P-B protects the delicate circuit board of your M.2 SSDs from bumps and drops..Complete solution to convert any M.2 SATA SSD into the exact dimensions and port locations as a standard 2.5" SATA SSD.Dimensions: 0.37"H x 2.76"W x 3.98"D.Made of ABS plastic and aluminum in black.Exact same dimensions, port locations, and screw locations as a 2.5" SSD.Accepts any M.2 SATA SSD.Supports full SATA III bandwidth specification (6Gbps).100% toolless and screwless M.2 drive installation.Can be installed into any 2.5" drive backplane, 2.5" drive bay, or USB drive adapter.3-year manufacturer limited warranty

Compatible hard drive caddy (tray) for ICY DOCK ToughArmor MB992 and MB996 series SATA hot swap backplane RAID cage.Drive Interface: Serial ATA/300.Number of Total Expansion Bays: 1.Number of 2.5" Bays: 1.Integrated 2nd Battery, SmartCard, Barcode, Magstripe, Fingerprint, Serial Options and More

As the leading innovator in 2.5" drive converters, we're often in pursuit of designing the next best thing. With the EZConvert Lite MB882SP-1S-3B, we took the already proven EZConvert MB882 series converters and maximized the air flow with open air designs that is certainly made to impress. The EZConverter Lite MB882SP-1S-3B converts 2.5 SATA/SAS hard drives or SSD of all heights (7mm to 15mm) into an exact form factor of a 3.5" SATA hard drive so you can fit your 2.5" SSD or notebook drive anywhere a 3.5" SATA drive is used (requires SAS host for SAS drives). The EZConvert Lite crafted from one piece construction makes it lightweight yet practically unbreakable -a necessary attribute for high quality system builds. Our open air design and perforated vents help keep your drives nice and cool. Anti-vibration springs help your drives from slight impact yet our drive stabilizing mechanism keeps your drives in place; it strikes a balance to carefully maintain your drives. This converter is made for any consumer or builder looking to add a 2.5" drive to their setup, from gaming rig or media workstation to enterprise data server..Drive Interface: Serial ATA/600, SAS.Number of Total Expansion Bays: 1.Number of 2.5" Bays: 1.Useful for the multi-tenant unit and multi-business unit with Layer 4 traffic classifiers and bandwidth limit

504669982eea8dcc9ba6320eb38b1e62.Host Interface: Serial ATA.Drive Interface: Serial ATA, SAS.Number of Total Expansion Bays: 1.The 14" 1920 x 1080 screen provides a great movie watching experience

ff244423cfca789cd3ea284efccd5070.Exact same form factor of a slim optical drive..Fits 1 x 5mm to 9.5mm height 2.5" SATA HDD / SSD in a 12.7mm slim ODD bay..Supports transfer speed up to 6Gbps.The receiving SATA connector rated for up to 10,000 drive insertions.Removable EZ Slide Micro drive tray for easy maintenance.

As the leading innovator in 2.5" drive converters, we're often in pursuit of designing the next best thing. With the Icy Dock EZConvert Lite, we took the already proven EZConvert MB882 series converters and maximized the air flow with open air designs that is certainly made to impress. The EZConverter Lite MB882SP-1S-3B converts 2.5 SATA/SAS hard drives or SSD of all heights into an exact form factor of a 3.5" SATA hard drive so you can fit your 2.5" SSD or notebook drive anywhere a 3.5" SATA drive is used (requires SAS host for SAS drives). The EZConvert Lite crafted from one piece construction makes it lightweight yet practically unbreakable –a necessary attribute for high quality system builds. Our open air design and perforated vents help keep your drives nice and cool. Anti-vibration springs help your drives from slight impact yet our drive stabilizing mechanism keeps your drives in place; it strikes a balance to carefully maintain your drives. This converter is made for any consumer or builder looking to add a 2.5" drive to their setup, from gaming rig or media workstation to enterprise data server..Converts 2.5" SATA/SAS hard drives or SSDs of all heights into the exact form factor of a 3.5" SATA hard drive, so you can fit your 2.5" SSD or notebook drive anywhere a 3.5" SATA drive is used.Dimensions: 1"H x 4"W x 5.77"D.Made of ABS plastic and aluminum in black.Featuring EZ-Fit design for anti-shock and optimal drive fit.Open air design with all-around airflow vents for maximum air flow.Completely toolless drive installation for quick and easy setup.Supports 2.5" SAS HDD/SSD with single-channel SAS functions (requires SAS host).Supports SATA 6Gbps or SAS single channel.Universal mounting holes for most common PC cases.Optional screw hole for extra drive security.Perfect for anyone looking to add a 2.5" SATA HDD/SSD to their system.3-year manufacturer limited warranty

Icy Dock® ToughArmor 2 x 2.5" SATA Mobile Rack For 3.5" Device Bay; Matt Black.Hard drive accessory type: SATA mobile rack.Black.Dimensions: 25.4 mm(H) x 101.2 mm(W) x 133 mm(L).Interface: 2 x 7pin SATA.Drive fit: 2 x 2 1/2" SATA I/II/III SSD or HDD (9.5mm thickness).Material: Metal, drive bay: 3 1/2" floppy drive bay.Transfer rate: Up to 6 Gbps, form factor: Internal.Power: Inputs: Single 15pin SATA power port.LED indicator: Power: Solid green LED (power-on), HDD access indicator: Flashing amber LED.Drive cooling: Airflow vents with metal heat dissipation.Black SATA mobile rack is able to become more and more advanced and is constantly improving.

2981cee5982b122981107d0c00876f49.Supports docking 1 x 2.5" SAS/SATA HDD/SSD with SATA hot-swap functionality (5mm - 15mm).Fits any external 3.5" bay.Full metal chassis with industrial ABS plastic for full protection to the drive