VESA Mount Clamps

MI-9000 screen adapter kit will fit practically all LCD and LED/OLED monitor with a bezel height of 11.5 to 19.2 inches with thickness of up to 2.75 inches. These dimensions should be compatible with most monitors up to 30 inches in screen size. The versatile arms are designed to mate with any VESA monitor mounts with VESA 75x75 and 100x100 mm configurations. All the necessary hardware and installation instructions are included in the package..Compatible with most monitors up to 30 inches in screen size.VESA 75x75 and 100x100 mm configurations.Can safely carry up to 17.6 lbs. monitors.Supported by manufacturer's limited lifetime warranty.MI-9000 VESA adaptor attaches to your non-VESA compatible monitor and allows it to be connected to the industry-standard monitor desk mounts and stands.

Desk Mount Dual Monitor Arm - Desk Clamp VESA Compatible Monitor Mount for up to 32 inch Displays - Ergonomic Articulating Monitor Arm - Height Adjustable/Tilt/Swivel/Rotating (ARMDUAL3).32 INCH LARGE MONITOR SUPPORT: VESA 75x75mm / 100x100mm compatible multi monitor mount supports 2 large monitors up to 32" (17.6 lb. / 8 kg) per arm w/ horizontal articulation & basic height adjustment.ADJUSTABLE SET UP: Use the desk-clamp (C-clamp) to easily mount and tighten by hand to a desktop (40-85 mm thickness) & cable management clips to hold incl. tools for quick height & angle adjustment.EASY DISPLAY ROTATION: This desk mount dual monitor arm has articulating arms that support toolless monitor rotation from landscape to portrait positioning for viewing longer pages without scrolling.SLEEK DESIGN: Streamlined look w/ small footprint enhances the work area and built-in adjustable cable management clips along the arms and center pole keep cables organized for a presentable workspace.WIDE RANGE OF MOTION: Double monitor mount increases ergonomic comfort and productivity with +30/-30° tilt, +90/-90° swivel, 360° rotating display, and height adjustment along the 15.7" (39.8 cm) pole.Dimensions: 19.6"H x 34.1"W x 4.9"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.5-year manufacturer limited warranty.Monitor Mount | Desk C-Clamp | Dual Swivel Arms | Adjustable | For up to 32” Monitors

The Joy Factory MNU502 MagConnect Clamp Mount is a mounting accessory designed to help installers and IT teams achieve a clean, reliable setup. Its durable build and streamlined design support professional deployments across offices, classrooms, retail, and commercial environments..Durable, installer-friendly design.Low-profile, clean appearance.Broad use across AV/IT scenarios.Mounting accessory for professional AV/IT installs

Save space and neatly mount your docking station or thin client or USB hub to a VESA mount behind your monitor or under your desk - Thin Client Mount with 75x75 and 100x100 VESA mount compatibility - Ideal for holding an Intel NUC or Mac Mini - Supports up to 11 lb. (5 kg) - Adjustable width (0.7" to 2.8" / 17 mm to 70 mm) - Mac Mini Mount / Under Desk Computer Mount / Under Desk CPU Mount / Under Desk PC Mount / Computer Mount / CPU Mount / Mac Mini VESA Mount / Mini PC VESA Mount.Save space and reduce cable clutter by mounting your thin-client PC or docking station to the back of your monitor, clamped to a monitor-mount pole, or under your desk.Supports up to 11 lb. (5 kg).Adjustable width from .7" to 2.8" (17 mm to 70 mm).75x75 and 100x100 VESA mount compatibility.Rubber pads to prevent damage to your device.Easily access your computer with the open-frame design.Save space and neatly mount your docking station, thin client or USB hub to a VESA mount, behind your monitor, or under your desk

Desk Mount Dual Monitor Arm - Desk Clamp / Grommet VESA Monitor Mount for up to 32 inch Displays - Ergonomic Articulating Monitor Arm - Height Adjustable/Tilt/Swivel/Rotating (ARMDUAL2).32 INCH LARGE MONITOR SUPPORT: VESA 75x75mm / 100x100mm compatible multi monitor mount supports 2 large monitors up to 32" (17.6 lb. / 8 kg) per arm w/ horizontal articulation & basic height adjustment.ADJUSTABLE SET UP: Use the desk-clamp (C-clamp) or grommet to easily mount and tighten by hand. Adjust the height and angle quickly with the included tools attached to the cable management clips.EASY DISPLAY ROTATION: This desk mount dual monitor arm has articulating arms that support toolless monitor rotation from landscape to portrait positioning for viewing longer pages without scrolling.SMALL FOOTPRINT: Space-saving design enhances the work area and built-in adjustable cable management clips along the arms and center pole keep cables organized for a presentable workspace.WIDE RANGE OF MOTION: Double monitor mount increases ergonomic comfort and productivity with +45/-45° tilt, +90/-90° swivel, 360° rotating display, and adjustable height along the 15.7" (39.8 cm) pole.Dimensions: 21.57"H x 35.94"W x 5.83"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.5-year manufacturer limited warranty.Monitor Mount | Desk/Grommet | Double Joint | Adjustable | For up to 32" Monitors

Desk Mount Quad Monitor Arm – Premium Articulating VESA 4 Monitor Mount 2x2 up to 27" – Ergonomic Height Adjustable Pole Mount - Tilt/Swivel/Rotate - C-Clamp/Grommet - Silver (ARMQUADPS).ADJUSTABLE SET UP: Silver four monitor mount w/ cable management clips along arms & center pole to organize cables for a tidy computer workspace & holds incl. adjustment tools for articulation tension.EASY INSTALLATION: Premium desktop quad monitor mount w/ convenient toolless slide & click design makes assembling the monitor arms & VESA adapters easy; Desk & grommet clamps can be tightened by hand.HEAVY DUTY MULTI-MONITOR MOUNT: VESA 75x75/100x100mm compatible desk mount quad monitor arm (2x2) supports 4 large displays up to 27" (24.8lb) per screen; Articulating & height adjustable.STARTECH.COM ADVANTAGE: IT professionals choice for over 30 years; This quad monitor arm is backed for 10-years by StarTech.com, including free 24/5 North America based multi-lingual tech support.WIDE RANGE OF MOTION: Ergonomic monitor mount w/ +90°/-15° tilt, +/-180° swivel, 360° rotation, adjustable height along 27.9" pole; Swiveling arms for flexible LCD/LED monitor setup i.e.. back to back.Dimensions: 13.6"H x 27.87"W x 8.27"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in silver.Rubber feet protect desk surface.5-year manufacturer limited warranty.Four Monitor Mount | Desk/Grommet Mount | Tool-less Assembly | For Up to 27" Monitors

MI-780 VESA adaptor attaches to your non-VESA compatible monitor and allows it to be connected to the industry-standard monitor desk mounts and stands. MI-780 screen adapter kit will fit practically all LCD and LED/OLED monitor with a bezel height of 10.5 to 16.25 inches with thickness of up to 2.75 inches. These dimensions should be compatible with most monitors up to 30 inches in screen size. The versatile arms are designed to mate with any VESA monitor mounts with VESA 75x75 and 100x100 mm configurations..Adapter arms that allow mounting non-VESA monitors to VESA monitor mount desk and wall mounts.VESA monitor mount with 75x75 and 100x100mm mounting holes.Fits 13"-27" Monitors.Fits screen thickness of 1 inch to 2.75 inches.Max Load Capacity 17.6 lbs..Supported by manufacturer's limited lifetime warranty

Optimize your video conferencing setup with the HP Poly VESA/Wall Mount, designed specifically for the Poly Studio X30, X32, and V12 video bars. This versatile mounting solution offers both VESA and wall mounting options, allowing you to securely install your video bar above or below a display in either standard or inverted orientation. Whether you're outfitting a meeting room, huddle space, or executive office, this mount ensures a clean, professional look and stable performance. Built with precision and durability, it includes all necessary brackets and installation hardware for quick and easy setup. The mount supports standard VESA patterns, making it compatible with a wide range of displays. Ideal for businesses seeking flexibility and reliability in their AV installations, the HP Poly VESA/Wall Mount enhances the functionality and aesthetics of your conferencing environment. Backed by HP’s trusted quality, it’s the perfect accessory to complete your Poly Studio system..This is a versatile mounting kit designed to securely install Poly Studio X30, X32, and V12 video bars on either a wall or a display using standard VESA patterns.Includes wall mount brackets, VESA mount brackets, and installation hardware for flexible mounting options.Compatible with all major video conferencing platforms when used with supported Poly Studio video bars.Supports both wall mounting and VESA mounting above or below a display, including inverted positioning.Designed to fit Poly Studio X30, X32, and V12 models securely

Upgrade your conference room setup with the HP Poly VESA Mount, designed exclusively for the Poly Studio E70 camera. This mount offers a VESA-compatible design, making it easy to attach your E70 to any standard VESA mounting system for a clean, professional installation. Perfect for modern meeting spaces, this solution ensures stability, flexibility, and a clutter-free environment. Enhance your video conferencing experience with a mounting solution that combines functionality and sleek design. Get the HP Poly VESA Mount for Poly Studio E70 today at Staples and create a streamlined, professional meeting space..VESA Mount Compatible – Fits standard VESA mounting systems for universal adaptability..Optimized for Poly Studio E70 – Purpose-built for secure and precise camera placement..Professional Mounting Option – Ideal for conference rooms, huddle spaces, and collaborative environments..Durable & Reliable – Engineered for long-lasting performance and easy installation..HP Poly VESA Mount for Poly Studio E70 – Secure, Versatile Mounting Solution

Elevate your video conferencing setup with the HP Poly Studio USB VESA Mount, designed to provide a secure and flexible mounting solution for your Poly Studio USB video bar. Whether you're outfitting a meeting room or upgrading your AV furniture, this mount allows you to position the video bar either above or below your display, ensuring optimal camera angles and a clean, professional look. Compatible with VESA 100 x 100 and 600 x 600 patterns, it integrates seamlessly with a wide range of monitors and displays. Built for stability and ease of installation, the mount enhances the integrity of your conferencing system while supporting a clutter-free workspace. Ideal for businesses and professionals seeking reliable, high-quality AV solutions, the HP Poly Studio USB VESA Mount is a must-have accessory for maximizing the performance and aesthetics of your video conferencing environment..This is a mounting bracket designed to securely install the Poly Studio USB video bar above or below a display using standard VESA patterns.Includes the VESA mount bracket and necessary installation hardware.Compatible with all major video conferencing platforms when used with the Poly Studio USB video bar.Supports VESA mounting above or below monitors using patterns ranging from 100 x 100 mm to 600 x 600 mm.Comes with a 1-year Manufacturer’s warranty

4 monitors are no small thing. In fact, if you currently have four monitors they have probably taken over your desk by now. Shuffling papers and having no mouse or keyboard space is no way to live. Mount each monitor onto one of the MI-63156 sturdy and secure arms for a more comfortable work environment. Each arm comes with articulating capabilities, cable management integration, a VESA compliant head, and a solid construction. Articulating arms are capable of full-motion rotations which means your monitors are not limited by any position you need. The ergonomic benefits provide healthier alternative to viewing and using your PC. A VESA compliant head offers you multiple configurations, 75x75 and 100x100 (mm) for an adaptable model for screen mounting. If you upgrade or change monitors, it wont be hard to find one with a compatible mount. Installation is easy and using it is even easier. Quick release action joints keep motion smooth and effortless. The c-clamp clamp design is nearly universal, suiting .79 to 2.36 inch thick desks. Organize your desk, reinvent the way you use your monitors, and revitalize your work or home life with the MI-63156. All necessary hardware and installation instructions included. Features: Quad Monitor Support Max Screen Size 27 inches C-clamp table thickness 0.79 to 2.36 inch Solid Aluminum die-cast construction Easy installation Load Capacity 39.6lbs each monitor Tilt: 105 degrees Rotation: 360 degrees (portrait or landscape) Swivel: Max 360 degrees VESA compliant 75x75 and 100x100 Clean Cable Management.Quad monitor desk stand for 22" monitors up to 22lbs each.Rotate and swivel 360 degrees, Tilt 105 degrees.Solid aluminum die cast construction. Sleek contemporary silver color schemes..Supported by manufacturer's limited lifetime warranty

Raise your monitor to a comfortable viewing height with this monitor bracket.Compatible with: VESA mounting patterns.3-year manufacturer limited warranty

The espresso Displays MP0001 VESA Mount is a sleek and functional accessory designed specifically for Espresso Displays. It enables users to mount their portable display securely onto any VESA-compatible stand or arm, enhancing workspace flexibility and ergonomics. Ideal for professionals seeking a minimalist setup, this mount ensures stable support while maintaining the slim and modern aesthetic of the Espresso Display. Its compatibility and ease of installation make it a practical choice for both home and office environments..VESA mount designed specifically for Espresso Displays.13 to 15.6 inches in size. monitor.Black in color.The mount is compatible with standard VESA patterns

This Poly mounting clamp is compatible with the Poly Studio Smart Camera E70 and the Poly Studio Video Bar P15 and R30. The display clamp is easy to install and allows you to optimally position your device..Display clamp mount for Poly Studio E70/P15/R30.Dimensions: 1.61"H x 6.3"W x 3.94"D.Mounting clamp is easy to adjust and allows for optimal positioning

The Amer AMRV200 VESA extension kit allows for the extension of an existing VESA mount to extend 100mm VESA patterns to support a device requiring 200mm VESA patterns or to offset a VESA Mount to accommodate monitors that have trouble fitting into a mount. Using this adapter as an offset can solve issues when adjacent monitors overlap or when more room is required to be able to allow more flexibility with the mount. Using the adapter as a VESA extension allows for the conversion of a 100 x 200 VESA mount into a 200 x 200 or a 100 x 100 VESA into a 100 x200 VESA..Raise your monitor to a comfortable viewing height with this monitor mount.Made of steel.Weighs 0.57 lbs..Dimensions: 1"H x 8.74"W x 0.3"D.Compatible with: VESA mounting patterns

MI-2042L is ideal for convenient single stud installation of small to medium size TVs. Improve your viewing experience by positioning your TV in the ideal position using this mounts full motion arm. It can tilt, swivel and extend for a better viewing experience. It can hold up to 33lbs and is compatible with 75mm x 75mm to 200mm x 200mm VESA patterns. Enjoy a comfortable environment whether it's at home or in the office!.Full motion arm can swivel, tilt and extend for the perfect TV placement.Single-stud wall plate for easier installation.Extends from 1.75" to 15" from the wall.Compatible Screen Size: 17" to 47".Weight Capacity: 33lbs.Tilt: 15 degrees down, 15 degrees up.VESA 75x75, 100x100, 200x100, 200x200 and 250x100.Swivel: 180 Degrees.Extension: 1.75" minimum to 15" maximum.VESA 75x75mm, 100x100m, 200x100mm, 200x200mm.Package includes wall mount, installation hardware, easy-to-follow installation instructions.Supported by manufacturer's limited lifetime warranty.MI-2042L fits TVs with VESA patterns from 75mm x 75mm to 200mm x 200mm, screens up to 47", and holds up to 33lbs

Raise your monitor to a comfortable viewing height with this monitor bracket.Comes in black.Compatible with: VESA mounting patterns

Looking for a heavy duty, double C-clamp base VESA compatible monitor stand? Then the MI-751 is your answer. This single monitor desk stand can tilt 90 degrees up and down in either direction, swivel a full 360 degrees left and right, and you can height adjust your screen on the 17.5" inch pole. The display can be rotated into portrait or landscape orientation and will hold in place..Single LCD monitor desk stand for 17"-27" monitors.Full motion articulating arms. Rotate 360, Swivel 360, Tilt +-15.Dual C-clamp fits .79" to 2.36" thick desks.Supported by manufacturer's limited lifetime warranty.Mount-It! Single Monitor Arm Mount Desk Stand | Full Motion Height Adjustable | Fits 19-32 Inch VESA 75 100 Screens

This flat panel display wall mount will easily install to a single wall stud. It provides full-motion capability through its three articulating joints and the tilt and rotate function at the monitor plate. Increase viewing comfort-help reduce eye, back and neck strain. Swift and easy movements and adjustments. The spring arm tension can be adjusted to suit the weight of the monitors, allowing fingertip height adjustment. Features - Weight capacity: 40 lbs. - Tilt: up 15 degrees up or down - Swivel: 180 degrees at each joint - Rotate: 360 degree - Extension: 2" minimum to 15" maximum from the wall. - Monitor can be installed either in portrait or landscape shape - Fully adjustable arms - VESA Standard: VESA 75 (hole pattern: 75 x 75 mm), VESA 100 (hole pattern: 100 x 100 mm) - The package includes the wall mount, the installation hardware (for connection to the wall and to the monitor), easy to follow installation instructions..Monitor Wall Mount fits most of 12" -24" Computer Displays.Tilt, Swivel, Articulate, Extend, and Collapse Features.Monitor moves 2"-15" from Wall.15 degrees up or down tilt.Weight rated to 40 lbs..Mount-It! MI-2041 Full-Motion Articulating Wall Mount Arm integrates fashion with function, delivering ergonomic performance with style.

Mount your Micro or Thin Client between a monitor and an arm using the Dual VESA Mount. The mount also comes with an enclosure to house power adapter. It provides ultimate adjustability and the best experience when used with a touch monitor in workspaces such as a kiosk or a retail endpoint..Raise your monitor to a comfortable viewing height with this monitor mounting kit.Comes in black.This bay organize essentials such as pens, clips, etc..Meets or exceed VESA standard

Raise your monitors to an ergonomic position and work more efficiently with this quad monitor mount. Designed for performance, this quad mount is made from high-strength steel for durability. Includes both clamp and grommet installation components to fit a variety of desktops. Each pair of arms can be raised and lowered on the pole for easy height adjustment. Tilt and swivel offer multiple monitor angles for comfortable reading, and integrated cable management keeps your cords off your desktop. All necessary instructions and hardware included..Raise your monitors to a comfortable viewing height with this quad monitor mount.Supports up to 32" monitors for versatile use.Made of steel.-45- to 45-degree tilt and -180- to 180-degree rotation adjustment options enable optimal viewing.-180- to 180-degree rotation allows monitors to be oriented vertically or horizontally.Total weight capacity: 70.4 lbs. (17.6 lbs. per monitor).Compatible with: VESA 75 x 75, 100 x 100 (mm) mounting patterns.Comes in black.Supported by manufacturer's limited lifetime warranty

Mount-It! MI-789 triple arm (horizontal) monitor mount and stand allows you to clear out your desk space, while providing ergonomic monitor installation height. Say good bye to neck and should pain and increase your productivity with three screens. Heavy duty stand and pole design makes this three monitor mount sturdy. Economical and dependable, mechanical monitor arms allow several height options for placing your monitor in the best ergonomic position, while offering more desktop space. The double link swing arms that support the monitors can be adjusted on the vertical tube for the best height adjustment. The arms and the base come with integrated cable management feature. Cable management system keeps cords organized. The heavy duty weighted metal base as well as the grommet mechanism secures the mount to the desk. The arms that support the monitors can be adjusted on the vertical tube for the best height adjustment. Articulating arms on the sides allow swivel function up to 360 degrees with 15 degrees of tilt at the mounting panel. Specifications: 66 lbs. total carrying capacity. 22 lbs. for each monitor. VESA 75 and VESA 100 bolt pattern compatible. Made from high grade steel and aluminum. Base dimensions: 12.5 inch wide, 13.4 inch deep. The monitors can be installed in either portrait or landscape mode, with interchangeability without having to remove monitors. Kit includes the mount, hardware kit and installation instructions. It is the ideal desk mount for office, reception areas, hospital, retail environments..Triple Monitor Stand fits most of 13" -24" Computer Displays.Tilt, Swivel, Height Adjustable and Rotating Features.Each monitor can tilt up or down 15 degrees and rotate 360 degrees.Rotating the monitor holders allows landscape or portrait positioning.Heavy-duty design supports 66 lbs..Supported by manufacturer's limited lifetime warranty

Mount-It! MI-7996 is an affordable, easy way to convert your existing desk into an ergonomic sit-stand workstation. With C-clamp and grommet mounting options, a 25" tray for a keyboard and mouse, adjustable dual monitor mounts, and a gas spring arm system, the MI-7996 lets you go from sitting to standing in seconds. The height and tilt adjustments ensure you will be able to position your keyboard and monitor in exactly the right place for you. The keyboard tray has plenty of space to fit a keyboard and a mouse side by side, and the heavy-duty steel construction will allow you to enjoy this workstation for years to come..Raise your monitor to a comfortable viewing height with this monitor mount.Compatible with two monitors up to 32".Up to 28" height adjustment to sit or stand while you work.Made of steel.35-degree tilt and 360-degree rotation adjustment options enable optimal viewing.25.7"W tray is large enough for a keyboard and mouse side by side.17.6 lb. weight capacity per monitor.Dimensions: 31.8"H x 37"W.Clamp or grommet mounts.Compatible with: VESA 75 x 75mm and 100 x 100mm mounting patterns.Tilt and swivel to set a position that is comfortable for you.Great for use in any home or office environment.Supported by manufacturer's limited lifetime warranty

The Mount-It! MI-785 Hanging Monitor Mount for cubicles is specifically designed to allow you to hang a VESA computer monitor on your cubicle wall with a heavy-duty, adjustable clamp. No drilling required! Simply adjust the clamp hook to fit the top of your cubicle wall, and hang the mount. This screen hanger also has a quick release handle so you can easily adjust your monitor to 10 pre-set heights for the optimal viewing angle. Works with VESA monitors (75x75 and 100x100) from 17" to 32" and supports up to 17.6 lbs..Easily Clamps on Cubicle Divider Walls.RECOMMENDED MONITOR SIZES: 17" - 32".HANGING CLAMP ADJUSTMENT: 1.46" (MIN) - 3.5" (MAX).VESA COMPATIBILITY: 75mm x 75mm, 100mm x 100mm.CAPACITY: 17.6 lbs..ROTATION: +/-180 degrees.Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors with VESA 75 and VESA 100 mounting patterns.Supported by manufacturer's limited lifetime warranty

Boost productivity and efficiency with this heavy-duty dual monitor desk mount from our ProFlex Series, designed for seamless dual-screen multitasking. Supporting two monitors up to 35” and 44 lbs. each, our ergonomic mount ensures optimal screen positioning and improved workflow for every professional. The gas spring arms allow for effortless height adjustment to ensure ergonomic positioning for every user, while full motion tilt, swivel, and rotation give you complete control over your viewing angles. This helps reduce neck and eye strain, promoting better posture during long days at your desk. To ensure you stay connected, the built-in USB 3.0 and USB-C ports keep your devices powered and within reach. With a sleek matte black finish and high-strength steel and aluminum construction, this mount is as durable as it is stylish. The integrated cable management system keeps your workspace organized and clean, while clamp and grommet mounting options offer a secure, space-saving setup. Elevate your workstation with ProFlex—built for power users who demand flexibility, performance, and style..This heavy-duty dual monitor mount with gas spring arms supports two displays and is designed to enhance productivity and ergonomics in professional, home, and creative workspaces..Supports two monitors from 17" to 35", holding up to 44 lbs. per arm for stable and secure screen placement..Gas spring arms allow smooth and effortless height adjustments to achieve optimal viewing comfort for every user. Features a height range of 5.8" to 16.38" for customized viewing comfort..Constructed from durable steel and aluminum with a premium matte black finish for strength, longevity, and style..Provides full-motion adjustability with +50°/-20° tilt, ±180° swivel, and ±180° screen rotation for optimal viewing flexibility, enabling precise positioning and customized viewing..Includes an integrated cable management system that keeps wires neatly routed and your desk clutter-free..Each arm supports up to 44 lbs. for heavy-duty stability..The mount is Compatible with 75x75 and 100x100 mm VESA mounting patterns..Features integrated USB 3.0 and USB-C ports for quick charging and easy peripheral connectivity..Includes dual mounting options (C-clamp and grommet) to fit most desks for a secure, space-saving installation..Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by Manufacturer's Limited Lifetime Warranty..Experience seamless dual-screen productivity with the Mount-It! ProFlex Heavy-Duty Dual Monitor Arm, built for flexibility, ergonomic comfort, and sleek workspace performance.

Maximize the use and functionality of your monitor with this ultrawide single-monitor desk mount. Designed to securely hold a monitor or TV up to 42 inches in screen size and with a maximum load capacity of 22 lbs. Position your monitor at eye level for better posture while you work, and reduce neck, back, and shoulder pain. Installation only takes a matter of minutes, and can quickly convert your office or home into a productive workspace. The sleek finish on this mount will complement your surroundings and will last for years to come..Raise your monitor to a comfortable viewing height with this single-monitor desk mount.Pole height: 16.75"; base height: 3.75"; height adjustment: 14".VESA compatibility: 75mm x 75mm to 200mm x 200mm; compatible screen size: up to 42"; weight capacity: 22 lbs..Comes in black and made of heavy-duty construction.360-degree rotation makes the transition between portrait and landscape orientation much easier.Features 30-degree down/30-degree up tilt and 360-degree swivel.Organize your space with the cable management clip.Monitor mount is easy to install with both the C-clamp or included adapter for grommet slot.5-year manufacturer limited warranty

If you're looking for a fully adjustable POS mounting solution for the monitor at checkout, look no further. Adjust the height of the stand from 20" to 32.3". Easily swivel it for 360 degrees. Tilt 45 degrees upwards and 15 degrees downwards to reduce glare. Rotate your POS mount from landscape to portrait mode with ease, making the payment process easier for both customers and cashiers. Securely attach the base to a countertop and protect cables by rubbing them inside the pole for a clean and organized workspace..Freshen up your checkout with this adjustable POS monitor mount.Fits up to 23" monitors.Height is adjustable from 20" to 32.3".Comes in black and made of steel.Tilt angle: +45/-15 degrees; swivel: 360 degrees; rotation: 360 degrees.Dimensions: 20"-32.3"H x 4"Dia..Compatible VESA patterns: 75mm x 75mm and 100mm x 100mm.Toolless tilt allows for an effortless positioning.Bolt-down base allows for sturdy and secure installation.Cable management allows you to hide and organize your cables inside the pole.Weight capacity: 33 lbs..Supported by manufacturer's limited lifetime warranty

MI-2761 merges functionality with aesthetics. The full motion arm extends and retracts, tilts, swivels and height adjusts. The mounting plate can rotate between landscape and portrait modes and the vertical adjustment range totals 11.5 inches. Spring tension can be precisely adjusted to suit the weight of the monitor, allowing fingertip height adjustments. The included cable management system provides a clean installation option. This economical monitor mount is ideal for classrooms, offices, homes, public areas, and more..This single monitor desk mount is designed to securely support screens ranging from 15" to 32"..Single arm is controlled by a durable, reliable mechanical spring and can tilt, swivel, raise, and lower.The mount is compatible with 75mm x 75mm and 100mm x 100mm VESA patterns and displays with screens up to 32".Spring Arm Height adjustable up to 11.5 inches.Tilt: 90 degrees up / 90 degrees down.Swivel: 360 degrees at two joints and 180 degrees at one joint.Rotate: 360 degree (between landscape and portrait modes).Integrated cable management system.Cost effective and space saving single arm mount is great for any office environment.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.Adjustable Single Monitor Mount for Office, Home, and Classroom Use!

If you're looking for a fully adjustable POS mounting solution for the monitor at checkout, look no further. Easily swivel it for 360 degrees. Tilt 45 degrees upwards and 15 degrees downwards to reduce glare. Rotate your POS mount from landscape to portrait mode with ease, making the payment process easier for both customers and cashiers. Securely attach the base to a countertop and protect cables by rubbing them inside the pole for a clean and organized workspace..Freshen up your checkout with this adjustable POS monitor mount.Fits up to 23" monitors.Comes in black and made of steel.Tilt angle: +45/-15 degrees; swivel: 360 degrees; rotation: 360 degrees.Dimensions: 19.7"H x 4"Dia..Compatible VESA patterns: 75mm x 75mm and 100mm x 100mm.Toolless tilt allows for an effortless positioning.Bolt-down base allows for sturdy and secure installation.Cable management allows you to hide and organize your cables inside the pole.Weight capacity: 33 lbs..Supported by manufacturer's limited lifetime warranty

Enhance your WorkFit Dual workstation with the Ergotron Tall-User Kit, designed to meet ergonomic height requirements for taller users. This upgrade adds 30° of up/down tilt adjustment, improving display positioning for greater comfort during prolonged sitting or standing. Compatible with WorkFit-S, WorkFit-A, WorkFit-C, and select WorkFit-T/TL models, the kit includes two monitor pivots, riser brackets, and mounting hardware for easy installation. Supporting monitors up to 24" and a combined weight of 12–28 lbs., it ensures stable, flexible performance. With full 360° rotation and VESA MIS-D compatibility, this black kit delivers a tailored ergonomic experience backed by a five-year warranty..Converts dual-monitor setups for ergonomic use in sit-stand workstations..Supports two monitors up to 24" each for balanced dual-screen productivity..Raises display height to meet ergonomic needs of taller users..Finished in sleek black with durable metal construction for long-term use..Compact kit design with no drawers or shelves for streamlined installation..Weighs just 2.9 lbs., making it lightweight yet sturdy for daily use..Measures 22" x 6.5" x 5.1" to fit easily into workstation setups..5-year limited warranty..Compatible with VESA MIS-D 100/75 mm mounting standards.

Enhance your workspace with our full-motion dual monitor mount, designed to accommodate two monitors up to 32 inches and 17.6 lbs. each. Perfect for professionals and gamers alike, this mount features individual gas springs on each arm for effortless height adjustments, ensuring each screen is always at your ideal ergonomic viewing level. Enjoy the flexibility of full motion control with +90°/-45° tilt, +/-90° swivel, and a full 180° screen rotation, making it easy to share your screen with coworkers or adjust for optimal comfort during long work sessions. The integrated cable management system keeps your desk organized and clutter-free, supporting a more productive environment. Whether in a bustling office, a quiet home study, or a dynamic gaming setup, this mount's sturdy build ensures reliability and durability. Installation is a breeze with both clamp and grommet options included, fitting tabletops up to 1.97 inches thick. Maximize your desk space and your productivity with a setup that adapts to your needs, allowing you to work smarter, not harder..This is an adjustable dual monitor desk mount with built-in gas spring arms, designed for ergonomic positioning and increased productivity.Supports two monitors ranging from 13" to 32" in size, with one gas spring arm for each screen. Holds monitors up to 17.6 lbs. per arm.The height is adjustable from 6.3" to 16.34".The monitor mount is black in color and constructed from high-quality steel.Each arm offers full motion flexibility with a tilt range of +90° to -45°, swivel up to ±90°, and rotation up to ±180°, allowing for dynamic screen positioning and easy screen sharing..Compatible with 75x75mm and 100x100mm VESA mounting patterns..Integrated cable management keeps cords organized and out of sight, maintaining a neat and distraction-free workspace..Ideal for both home and professional use, this sturdy mount increases screen real estate and enhances ergonomic comfort for multitasking..Versatile installation with included clamp and grommet mounting options for a stable fit on any desk.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.Upgrade Your Desk with a Dual Monitor Mount That Does It All!

This universal Mount-It! TV and monitor mount adapter was designed to allow your current mount to fit larger monitors or TVs. No need to buy a brand-new mount to fit your larger TV or monitor. You can transform a 75 x 75mm and 100mm x 100mm VESA mount to fit up to 200mm x 100mm and 200mm x 200mm VESA sizing. The heavy-duty steel construction can hold up to 66 lbs., but is limited by your monitor mounts load capacity. Hardware kit is included in package..Universal TV and monitor mount adapter is designed to allow your current mount to fit larger monitors or TVs.Dimensions: 8" x 8".Conversion kit allows 75mm x 75mm and 100mm x 100mm VESA patterns to fit up to 200mm x 100mm and 200mm x 200mm; max weight capacity: 66 lbs. (load capacity is limited by the mount's capacity).Attaches to your existing VESA mount.Includes hardware kit: four pieces each of M6x30, M6x20, M6x14, M5x10, M5 washers, and M5 nuts.Made of heavy-gauge steel, comes in black.Fits most 32" to 55" TVs and monitors.Supported by manufacturer's limited lifetime warranty

Raise your monitors to an ergonomic position and free up desk space with this stackable dual monitor mount. Designed for performance, this mount is made from aluminum and steel for sturdy use. This mount includes both clamp and grommet installation components to fit a variety of desktops. Gas spring allows for smooth and easy height adjustment. Tilt and swivel functionality offer multiple monitor angles for comfortable reading, and integrated cable management keeps your cords off your desktop. Screen Sizes: 17" - 32", VESA Compatible: 75x75, 100x100, Monitor Weight Capacity: 17.6 lbs. (per screen),Tilt: +35°~-35°, Swivel: +90°~-90°, Screen Rotation: +180°~-180°, Arm Extension: 19.5" - 21", and Material: Aluminum, Plastic, Steel..DUAL MONITOR ARM MOUNT DESK STAND: Fits two monitors up to 32" in size, with a maximum support weight of 17.6 pounds each, using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the monitors. Comes with interchangeable C-clamp (for desktops up to 3" inches thick) or grommet (up to 1.5" thick) base mounts..WELL-DESIGNED: Vertical monitor mount has counterbalanced, gas spring arms for effortless adjustments, and screens can be stacked in a vertical or horizontal configuration. Comes with integrated cable management and is made out of heavy duty steel and aluminum alloy..FULLY ADJUSTABLE: Vertical dual monitor stand can tilt up and down 35 degrees in either direction, swivel left and right 360 degrees, and raise or lower a total of 14.2 inches. Monitors can be rotated 180 degrees for portrait or landscape orientation independent of each other..EASY INSTALLATION: Double monitor mount comes with all mounting hardware, tools, and instructions necessary for assembly. Turn hex bolt on top of gas springs to set the counterbalance and hold screens in place..Supported by manufacturer's limited lifetime warranty.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Boost Ergonomics & Desk Space with Our Dual Monitor Mount. Perfect for Home Offices, Professional Set ups, Commercial Set ups to name a few.

The Atdec AWMS-4-4675 is a quad 18" arm combination attached to a 29.5" post with F-clamp. Display height, optimal viewing angle, and orientation can be set to individual requirements. Built of lightweight yet durable aluminum, the mount can be easily recycled at the end of its life..Raise your monitor to a comfortable viewing height with this quad-arm monitor mount.Supports four displays up to 30" in landscape orientation or up to 22" in portrait mode.Comes in black and made of aluminum.-25 to 45-degree tilt, 360-degree pan, and 360-degree rotation adjustment options enable optimal viewing.Compatible with: VESA 75 x 75mm, and 100 x 100mm mounting patterns.Rubber feet protect desk surface.Compatible with flat screens with maximum weight up to 26.5 lbs. or curved screens with maximum weight up to 17.6 lbs. per monitor.Modular, adaptable, and upgradeable design.10-year manufacturer limited warranty

This sit/stand desk mounted workstation turns an existing desk into a more active workspace quickly, with easy installation using a C-clamp or grommet base. Experience a more comfortable way to work throughout the day by adjusting the full-motion fluid gas spring arm and the full-motion monitor mounts. This workstation features two USB 3.0 ports, for charging or data transfer, in the front of the mount, keeping CPU connection within reach and easy to access..Raise your monitor to a comfortable viewing height with this dual-monitor sit/stand desk mount.Supports most flat-panel monitors up to 27" for versatile use.Height adjusts from 23.1" to 42.9" for comfortable viewing.Made of steel and comes in black.10-degree tilt and 180-degree rotation adjustment options enable optimal viewing.Features an attached ergonomic keyboard tray, phone slot, and storage space for office supplies.Weight capacity: 13.2 lbs. per monitor.Dimensions: 23.1"-42.9"H x 26"W x 36.5"-40.7"D.Compatible with VESA 75 x 75mm, 100 x 100mm mounting patterns.Two integrated USB 3.0 ports on the front of the mount, keeping the connection within reach.Attaches to an existing desk using either the C-clamp or grommet base.180-degree rotation allows the monitors to be oriented vertically or horizontally.Supported by manufacturer's limited lifetime warranty

This desk mount monitor arm enables you to mount and raise a monitor with a maximum screen size of 32" (16:9) or 49" (32:9) ultrawide. Its solid steel construction allows this monitor arm to support up to 17.6lb (8kg) with two mounting options (C-Clamp or Grommet mount) to securely attach your monitor to your desk..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 49" monitors for versatile use.Comes in silver/black and made of steel.-85 to 90 degree tilt and 360-degree rotation adjustment options enable optimal viewing.This bay organize essentials such as pens, clips, etc..Weighs 9.26 lbs..Dimensions: 5.5"H x 11.4"W x 19.1"D.Compatible with: VESA 100 x 100mm mounting patterns.Rubber feet protect desk surface.5-year manufacturer limited warranty

Easily raise your monitor to an optimal viewing height, reducing the strain on your neck and shoulder while working with Mount-It! MI-1766B dual-monitor wall mount. Each arm comes with a gas-spring mechanism for easy height adjustment without the need for tools. Full-motion articulating arms are fully adjustable for placing the monitor to almost any viewing angle. Comes with necessary hardware for an easy mounting process including mounting screws, anchors, washers, and VESA screws. Integrated cable management channels in each arm keep AV and power cords organized. Both monitors can be placed in landscape or portrait position. The articulating arms reach a max extension of 16.6" from the wall..Easily raise your monitor to an optimal viewing height, reducing the strain on your neck and shoulder while working with dual-monitor wall mount.Dual mount supports 17" to 32" screens.Each arm has counterbalanced gas-spring arms for effortless height adjustment.Comes in black.Tilt range: +/-35 degrees; screen rotation: 180 degrees (landscape and portrait modes), swivel range: 180 degrees left and right.Compatible VESA patterns: 75mm x 75mm and 100mm x 100mm.Tilt, swivel, and rotation features: easily transition from portrait to landscape view.Perfect for small offices, game rooms, and anywhere space is at a premium.Comes with integrated cable management channels.Maximum wall extension: 16.6".Each arm has a weight capacity of 19.8 lbs., ensuring secure support for your monitors..Each arm supports a weight capacity of up to 19.8 lbs..Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.A Dual-Monitor Wall Mount which is Adjustable, Ergonomic, and Space-Saving. Perfect for Small Offices and Gamers!

The MI-753XL triple monitor desk mount provides you with an ergonomic work station, where you can find any number of positions for your monitors. Tilt and orient your screen to help reduce glare and eye strain. Rotate easily between landscape and portrait orientation to suit your fluctuating work needs. The height-adjustable design allows you to turn your workspace into a sit-stand desk. Dual locking C-clamp ensures stability, reinforcing your mount and desk bond, and fits desks up to 4" thick. All necessary hardware and instruction guides are included..Raise your monitor to a comfortable viewing height with this triple-monitor desk mount.Supports most flat panel monitors from 13" up to 32" for versatile use.Made of heavy-duty steel and comes in black.90-degree tilt feature allows you to reduce glare and eyestrain.Weight capacity: 22 lbs. per arm.Compatible with VESA 75mm x 75mm and 100 x 100mm mounting patterns.Height-adjustable design allows you to turn your workspace into a sit-stand desk.360-degree independent plate rotation allows for easy setup for portrait and landscape orientation.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.Achieve a Customizable, Ergonomic Workstation with our Triple Monitor Mount

This single monitor desk mount features a full motion arm for smooth monitor adjustments. From height adjustment, to monitor tilt, swivel and rotation, this monitor mount is designed to position your monitor perfectly for a healthier, more comfortable way to work. Save desk space while improving posture by elevating your monitor off of the desk to eye level. The arm can extend out up to 22.5” for a long reach, great for larger desks or team collaboration. This premium single monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The c-clamp base fits desks up to 3” thick, making it an easy addition to any workspace. Fits monitor’s up to 32” and can carry up to 19.8lbs..Single Monitor Desk Mount fits most of 13" -30" Screens.Tilt, Swivel, Full Motion and Articulating Features.Each monitor can tilt up or down 105 degrees and rotates 360 degrees.Load capacity 28 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.10-year manufacturer limited warranty

The Amer Mounts™ AMR1AWSL monitor sit stand swing arm workstation wall mount system mounts keyboard, mouse and monitor all onto one flexible spring loaded arm. It supports screen size up to 24" and can withstand a load of 4.4 to 17.7 lbs. It has steel and aluminum construction for extended durability and stability. It provides tilt and swivel functions with 360 deg rotation for easy and comfortable view. It supports single monitor displays..Sit stand swing arm wall mount workstation system provides a simple way to mount your keyboard, mouse and monitor all onto one flexible extension arm.Maximum screen size supported: 24", load capacity: 4.4 to 17.7 lbs. (stand).Height adjustment: 4.88 to 17.27".Has steel, plastic and aluminum construction.Dimensions: 36.43"H x 52.99"W x 12.68"D.Tilt: 0 to 90 deg (keyboard), -5 deg/35 deg (hinge), -30 deg/65 deg (arm).Swivel: +/-90 deg, rotate or pivot: 360 deg.VESA mounting interface standard: 100 mm x 100 mm and 75 mm x 75 mm.Screw type: M4.Number of displays supported: 1.Weight: 25.16 lbs.

This LCD Monitor Pole with Double-Link Swing Arm provides a secure and elevated position for two flat-screen monitors to help free up valuable desk and work space. It's fully adjustable tilt, rotate, side-to-side, height, and tension settings enable a comfortable and productive viewing position that helps reduce eye fatigue, neck, and back strain. LCD monitors can be easily rotated around the pole to allow others to view presentations and other multimedia from almost any direction. Durable metal construction and a sturdy clamp provide a quick, easy, and secure mount to a desktop or other horizontal surface. Ready to install with included hardware, there's no need to drill holes into desks or countertops. Thus mount is made of high grade steel and aluminum. Fits most LCD monitors 13" to 27". Supports up to 22 lbs. per monitor. Every joint is able to be tightened, so you can adjust exactly how fluid/stationary you want everything, simply remove the cap on the joint and tighten the bolt underneath..Raise your monitor to a comfortable viewing height with this dual monitor desk mount.Supports up to 27" monitors for versatile use.Height-adjustable with two screws holding arms securely on pole.Sturdy aluminum construction features integrated clips and port for cable management.A +80/-80 degree tilt, 180-degree pan, and 360-degree rotation adjustment options enable for optimal viewing.Each arm securely holds up to 22 lbs. to fit most monitors (44 lbs. total load on height-adjustment assembly).Compatible with the standard VESA mounting patterns: 100 x 100 and 75 x 75.Meets VESA MIS-D mounting standard.Black finish completes overall aesthetic appeal.The C-clamp base has an integrated double lock to ensure stable mounting onto any surface up to 4" thick.Supported by manufacturer's limited lifetime warranty

The AMR4SU is a stand with an adjustable height that supports up to 4 LCD monitors. The sturdy construction of this mount support offers a great number of advantages for those wanting to create a more ergonomic and functional workspace. SEE MORE and DO MORE™ with features like: 90 Degree Monitor Rotation, Height Adjustment, Cable Management, Arm Angle Adjustment, IntelliTorque™ Hinge System, Aluminum Alloy Structure, Easy Installation, and VESA Mounting. Our LCD/LED monitor stand is an advanced display system providing increased efficiency and productivity through the use of our IntelliTorque™Hinge System, which allows for display rotation, swivel and tilt functions. In addition to these features, the device is also compatible with VESA 100x 100/75X75 and suitable for monitor sizes 15" to 24"..Compatibility: 4 x LCD/LED Monitors.Country of Origin: Taiwan.Device Supported: Flat Panel Display.Made of aluminum.-15 to 15-degree tilt and -15 to 15-degree pan adjustment options enable optimal viewing.Weighs 10.24lbs..Dimensions: 29.96"H x 28.15"W x 9.69"D.Compatible with: VESA 75, 100 mounting patterns.Comes in black.3-year manufacturer limited warranty

The MI-2751 transforms your desk into a more comfortable and ergonomic environment with the help of this monitor mount. Not only will you raise your screen to comfortable viewing levels, you will also free up a lot of desk space that you can use for other supplies and accessories such as laptops or notepads. Raising the monitor higher with this monitor mount improves your posture and provides ergonomic and healthy set up. Raising the monitor also saves valuable desktop space. The arm and pole has cable management clips to keep the power and HDMI cables tidy..MI-2751 is compatible with 75mm x 75mm, 100mm x 100mm VESA patterns and can hold up to 22lbs.Adjustable arm swivels 180 degrees, 360 rotation between landscape and portrait. Tilts 90 degrees.Heavy-duty clamp or grommet base easily attaches to your desk or tabletop.The arm and pole has cable management clips to keep power and HDMI cables tidy.The arm is height adjustable on the pole, up to 18".Supported by manufacturer's limited lifetime warranty.The MI-2751 monitor arm mount holds a monitor up to 32”/22 lbs.

Mount-It! MI-2752 is a dual monitor mount that raises your monitors to an ergonomic position to help you work more efficiently. Designed for performance, this mount is made from high-strength steel for durability and includes both clamp and grommet installation components to fit a variety of desktops. The arms can be raised and lowered on the pole for easy height adjustment. Tilt your screen at 90 degrees up and down or swivel it at 180 degrees up and down to find your most comfortable reading, and integrated cable management keeps your cords off your desktop. All necessary instructions and hardware included..ERGONOMIC DUAL MONITOR MOUNT: Raise your monitors/screens to the optimal viewing height to reduce neck stain and back stiffness. Cable management clips keep your desk neat organized..FULLY ADJUSTABLE: Mount arms can tilt up and down 90 degrees, swivel left and right 180 degrees, raise and lower 17" inches (the height of pole), and each screen can be rotated and placed in portrait or landscape orientation independent of one another.WIDELY COMPATIBLE: Works with screens from 17" to 32" in size and works with the standard 75x75mm or 100x100m VESA square bolt hole patterns.EASY INSTALLATION: 2-monitor stand comes with all mounting hardware, tools, and instructions necessary for assembly. The detachable VESA plates make mounting a breeze and can be adjusted up to 1” to perfectly align the height of monitors. Includes interchangeable C-clamp mount (works with desks up to 4" in width) and grommet base mount (works with desks up to 3.25" in width).Supported by manufacturer's lifetime limited warranty.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..The MI-2752 dual monitor arm mount helps you increase productivity and clear up extra space on your desk

This incredibly versatile product supports up to two 24" monitors each with a maximum individual weight of 26.5 lbs. Not only will this strong and sturdy mount have no trouble holding VESA certified 75x75 or 100x100 monitors, (fitting the above criteria), it is also extremely adjustable! Each monitor can be placed at a different height to accommodate different sized monitors. Both monitors have 360 degrees rotation. Also included is a +/- 20 degrees tilt in any direction Individually for BOTH Monitors, ensuring maximum user comfort. Height adjustable, with a maximum height of 13" from the desk to the center of the mounting device. Studies show that dual monitors can increase productivity by up to 50%..Compatibility: 2 x LCD / LED Monitors.Country of Origin: Taiwan.Device Supported: Flat Panel Display.Classic Desk Stand.Maneuverable and reliable, stand mounts are the most popular mounting choice for monitors..Can be moved around your desk, no unscrewing necessary.Weighs 6.92lbs..Dimensions: 9.46"H x 26.46"W x 14.57"D.Compatible with: VESA 75, 100 mounting patterns.Comes in black.3-year manufacturer limited warranty

Upgrade your workspace with this single monitor arm, designed to provide ergonomic positioning and free up valuable desk space. Unlike bulky built-in stands, this adjustable monitor mount lets you easily set your screen at the ideal height along its 16-inch pole, reducing neck and eye strain for a more comfortable workday. Enjoy full motion flexibility allowing you to find the perfect viewing angle whether you’re working, gaming, or multitasking. The VESA-compatible mount supports monitors up to 32 inches and 19.8 lbs., and its space-saving clamp or grommet base ensures a secure, clutter-free setup. Plus, integrated cable management keeps wires organized for a sleek, professional look..This is an adjustable monitor desk mount designed to support ergonomic screen positioning, and it includes both a C-clamp and grommet mounting base, as well as integrated cable management for a clean and efficient workspace..The mount supports one monitor ranging from 17" to 32" in size. Holds monitors up to 19.8 lbs..The screen can be mounted anywhere along the 16-inch vertical pole to achieve your desired ergonomic height..The item is available in black or white and is made of durable steel..It offers full motion adjustability, including ±160° swivel, +40°/-40° tilt, 360° screen rotation, and flexible pivot positioning to achieve an optimal viewing angle..This mount is VESA-compatible with both 75x75mm and 100x100mm patterns..The mount holds monitors up to 19.8 lbs., making it suitable for most standard and curved screens..Its dual mounting options (clamp or grommet) allow flexible installation on various desk types..Integrated cable management channels keep cords organized and out of sight, supporting a tidy, professional setup..Supported by Limited Lifetime Warranty.From home office to late-night gaming! This monitor arm keeps up with your lifestyle.

Relieve neck and back pain while freeing up desk space by mounting your monitor on the wall. This Mount-It! single-monitor wall mount can tilt, swivel, and rotate for versatile positioning. It features a gas-spring arm for effortless height adjustment and includes integrated in-arm cable management for a neat and organized appearance. Installation is easy with a single-stud wall plate and detachable VESA bracket. The sturdy aluminum and high-strength steel construction will stand the test of time. Turn the hexagonal bolt at the base of the gas-spring arm to adjust the tension to hold the monitor in place..Single-monitor wall mount helps you adjust your monitor to fit your needs.Fits monitors up to 32".Gas-spring arm allows for effortless height adjustment up to 11".Made of aluminum, steel, and plastic; comes in black.Tilt angle: +/-35 degrees; swivel: +/-180 degrees; rotation: +/-180 degrees.Compatible VESA patterns: 75 x 75mm and 100 x 100mm.Rotate between portrait and landscape orientation with ease.In-arm cable slots keep your space organized.Installing your monitor is quick and easy with a detachable plate.Extension from wall: 3.9"-20.5".Maximum weight capacity: 17.6 lbs..Supported by manufacturer's limited lifetime warranty

MI-1772 is one of our premium desk mounts that merges functionality with aestatics. Increase viewing comfort-help reduce eye, back and neck strain. Swift and easy movements and adjustments. The spring arm tension can be adjusted to suit the weight of the monitors, allowing fingertip height adjustment. Dual side-by-side monitor arm adjusts effortlessly for easy use. Full motion arms extend and retract, tilt, swivel and adjust in height. You can also rotate the monitors independently to switch between landscape and portrait modes. By elevating your monitors above your desk, increase desktop space and get ergonomic positioning of your screens fore reduced strain and better sitting posture..Dual Monitor Desk Mount Stand fits most of 13" -32" Displays.Tilt, Swivel, Full Motion and Rotating Features.Dual base allows c-clamp or grommet connection.Height Adjustable to 13".Holds monitors up to 19.8 lbs. per arm.Supported by manufacturer's limited lifetime warranty.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Height Adjustable Full-Motion Articulating Desk Mount integrates fashion with function, delivering ergonomic performance with style.