Waterproof Hard Case for Photography

The Black Eylar SA00022 Small Waterproof and Shockproof Gear and Camera Hard Case with Foam Insert is ideal for storing cameras, electronics, tools, and more. The pluck-and-pull foam along with its sturdy design will safely store sensitive items during travel or on the go. This case is IP67 waterproof, dustproof, and shockproof. The hard case includes 3 layers of foam—1 egg-crate top liner layer, 1 pull-and-pluck customizable layer, and 1 solid bottom pad layer. An innovative pressure equalization valve allows the case to quickly equalize to different air pressures when traveling from different altitudes. A rubber gasket lines the rim of the case, so when it’s latched closed it creates a waterproof seal. 2 padlock hasps allow this case to be secured with padlocks and meet TSA requirements for transport. The outer dimensions are 10.62 in. x 9.68 in. x 4.87 in. while the inner storage area is 9.25 in. x 7.12 in. x 4.12 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67); rubber gasket lines case’s rim to create a waterproof seal when latched closed.Ideal for cameras, lenses, mobile devices, and small gear.1 customizable pull-and-pluck layer, 1 egg-crate top pad layer, and 1 solid bottom layer pad.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.2 padlock hasps allow you to add your own padlock to keep valuables secure.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Meets TSA requirements with lockable hasps and fittings.External dimensions: 10.62 in. x 9.68 in. x 4.87 in..Internal dimensions: 9.25 in. x 7.12 in. x 4.12 in..Limited lifetime warranty.Black.⚠ WARNING:WARNING. This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

The Green Eylar SA00010 Waterproof and Shockproof Gear and Camera Hard Case with Foam Insert is designed to secure your gear for transport or storage. The equipment case is injection-molded from reinforced, high-pressure polypropylene plastic that is waterproof and crushproof. Its adaptive pressure-equalization valve releases built-up air pressure allowing for atmospheric compensation when transported at high or low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed, applying pressure to a rubber gasket that is molded to the perimeter of the case. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The SA00010 hard equipment case comes with 3 layers of foam designed to keep your valuables firmly in place — 1 fully customizable pull-and-pluck cubed foam layer, 1 solid layer pad, and 1 layer of egg-crate foam padding for the lid. 2 press-and-pull snap latches secure the full length of the case. 2 padlock-adaptable fittings allow for secure storage at home or on the go. Uniform ridges on the top and bottom create an in-line stackable design for multi-case transport. The outer dimensions are 11.65 in. x 8.35 in. x 3.78 in. while the inner storage area is 10.54 in. x 6.04 in. x 3.16 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).Ideal for cameras, mobile devices, gear, and lenses.1 customizable pull-and-pluck layer, 1 solid layer pad, and 1 egg-crate top pad layer.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.0.25-in. padlock hasps allow you to add your own padlock to keep valuables secure.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Edge-to-edge crushproof protection up to 3,000 lbs. of directly dispersed weight.Meets TSA requirements with lockable fittings.External dimensions: 11.65 in. x 8.35 in. x 3.78 in..Internal dimensions: 10.54 in. x 6.04 in. x 3.16 in..Limited lifetime warranty.Green.⚠ WARNING:WARNING. This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

The Gray Eylar SA00002 Large Waterproof and Shockproof Gear Hard Case with Foam Insert gives extra protection to your contents with 1 customizable pull-and-pluck cubed foam layer, 2 solid foam layers, and 1 layer of egg-crate foam padding. It also makes for safer traveling with its pressure equalizing knob. The hard case comes in a convenient size, making it easy to store inside a backpack or luggage and makes it ideal for storing cameras, electronics, and more. The outer dimensions are 19.78 in. x 15.77 in. x 7.41 in. while the inner storage area is 18.06 in. x 12.89 in. x 6.72 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear; provides waterproof protection for up to 3.2 ft. (1 m) of being fully submerged thanks to its rubber gasket lining.Ideal for standard DSLR camera, lenses, and accessories.2 customizable pull-and-pluck cubed foam layers, 1 egg crate foam layer, and 1 solid foam layer protect your gear.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Meets TSA requirements with lockable hasps and fittings.Stackable design.External dimensions: 19.78 in. x 15.77 in. x 7.41 in..Internal dimensions: 18.06 in. x 12.89 in. x 6.72 in..Limited lifetime warranty.Gray.⚠ WARNING:WARNING. This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

The Eylar SA00007 XXL Waterproof and Shockproof Gear Hard Transport Roller Case with Foam Insert combines heavy-duty protection with the ease of transportation. A tough outer shell allows for shock resistance while a strong seal creates water protection. Inside, there is compartmentalized foam to keep belongings safe and organized. A lockable handle pulls out to carry the box with sturdy wheels. Its air pressure equalizer knob lets you compensate for altitude while traveling. 4 layers of foam keep your valuables securely in place. This protective trolley case is ideal for traveling with heavy and sensitive items such as cameras, laptops, electronics, tools, accessories, and equipment. Clamps on top shut the box while its grooves make it easy to stack. External dimensions are 31.1 in. x 23.42 in. x 14.37 in. while internal dimensions are 28.34 in. x 20.47 in. x 11.02 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).Ideal for cameras, laptops, electronics, tools, and equipment with space for power cables and accessories.4 layers of foam protect your gear—1 customizable pluck-and-pull foam, 1 solid layer foam, 1 solid pad, and 1 top egg-crate foam.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Roller wheels and extendable handle for easy transport.External dimensions: 31.1 in. x 23.42 in. x 14.37 in..Internal dimensions: 28.34 in. x 20.47 in. x 11.02 in..Limited lifetime warranty.⚠ WARNING:WARNING. This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Pelican™ 10.62" x 9.68" x 6.87" Hard case foam in black has double throw latches which can be opened easily and an automatic pressure equalization valve. Combative and featherlight open cell core solid wall of stainless steel durability..Black.Dimensions: interior 9.87"(H) x 7"(W) x 6.12"(D), exterior 10.62"(H) x 9.68"(W) x 6.87"(D).Ultra-high impact structural copolymer.Watertight, crushproof, and dust proof.Automatic pressure equalization valve.Open cell core with solid wall design - strong, light weight.Pick n pluck with convoluted lid foam.Weight: 3.53 lbs..Pelican™ 10.62" x 9.68" x 6.87" Hard case with foam in black featuring an o-ring seal made of polycarbonate is crushproof and dustproof.

Pelican™ 1550 Hard Case with foam black comes with ultra-high impact polycarbonate shell and double-throw latches..Material: Polycarbonate.Dimensions: Exterior: 8.12"(H) x 16.87"(W) x 20.62"(L), interior: 7.62"(H) x 14.00"(W) x 18.43"(L).Accessibility: Clamshell.Ultra high impact polycarbonate shell.Open cell core with solid wall design.Double-throw latches.Polymer o-ring waterproof seal.Large fold down handle.Two padlockable hasps.Automatic pressure equalization valve.Stainless steel hardware.Chemical-resistant, corrosion-resistant, airtight, watertight, dustproof, crushproof.Lid depth: 1 3/4".Bottom depth: 5.87".2 level pick 'N' pluck with convoluted lid foam.Includes: Pelican 1550 case, 1553 O-ring, 1551 pick 'N' pluck foam.Certificates: IP67, DEF STAN 81-41/STANAG 4280, ATA 300.1555 padded divider set, 1553 O-ring, 1551 pick 'N' pluck foam.Lifetime limited warranty.Lifetime limited warranty.Pelican™ 1550 Hard Case with foam black comes with ultra-high impact polycarbonate shell and double-throw latches.

OM SYSTEM PT-059 Underwater Housing for Olympus Tough TG-6: Dive into the depths and capture stunning underwater moments with the OM SYSTEM PT-059 Underwater Housing for the Olympus Tough TG-6. Designed for adventurers, this rugged polycarbonate housing is waterproof up to 45 meters (147 feet), allowing you to explore the underwater world without limits. Its durable construction shields your camera from water, knocks, and bumps, making it the perfect companion for extreme conditions both underwater and on land. The PT-059's transparent back lets you easily detect any water penetration, while the black front coating prevents reflections, ensuring crystal-clear shots every time. Paired with the TG-6's wide-angle 25mm lens and specialized underwater shooting modes, you’ll have everything you need to capture breathtaking underwater snapshots, macros, and even HDR scenes. With easy access to all camera functions, including exposure compensation via the control dial, this housing offers complete control even at depth. For added versatility, it supports external underwater flashes, like the powerful Olympus UFL-3, ensuring you’re ready for any lighting condition. Plus, with a convenient screw mount, you can attach underwater converters for enhanced shooting flexibility. Whether you're an experienced diver or just starting your underwater photography journey, the OM SYSTEM PT-059 is the perfect tool to take your adventures to new depths..Camera & Camcorder Accessory Type: Underwater Camera Housing for photography at depths of up to 45 meters..Compatibility: For Olympus Tough TG-6 Camera.True Color: Black/Red ; Material: High-quality polycarbonate.Overall Dimensions: 6.2"H x 4.8"W x 3.2"D.Waterproof to 45 meters, high-quality polycarbonate construction, black front coating, transparent back, compatible with TG-6's 25mm lens, supports underwater shooting modes, access to all camera functions, optional external flash connection, screw mount for converters.

The Black Eylar SA00034 22-In. Carry-on Travel Roller Waterproof Equipment Hard Case with Foam Insert is designed to secure your equipment for transport or storage. It is sized to fit in standard overhead storage compartments for air travel. It meets TSA’s strict requirements for transport on airplanes in the USA. This case is IP67 waterproof, dustproof, and shockproof and a rubber gasket lines the rim of the case, so when it’s latched closed, it creates a waterproof seal. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The hard case includes 4 layers of foam—1 egg-crate top liner layer, 2 pull-and-pluck customizable layers, and 1 solid bottom pad layer. Press-and-pull snap latches secure the full length of the hard case and 2 padlock-adaptable fittings allow for secure storage at home or on the go. An innovative pressure equalization valve allows the case to quickly equalize to different air pressures when traveling from different altitudes. The outer dimensions are 22 in. x 13.81 in. x 9 in. while the inner storage area is 19.75 in. x 11 in. x 7.6 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67); rubber gasket lines rim of case, to create waterproof seal when latched closed.Ideal for cameras, lenses, electronics, and tools; designed to fit standard overhead airline compartments in the USA; TSA-friendly.4 layers of foam protect your gear-1 top egg-crate foam, 2 customizable pluck-and-pull foam layers, and 1 solid bottom layer of foam.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.2 padlock-adaptable hasps.Roller wheels and extendable handle for easy transport.External dimensions: 22 in. x 13.81 in. x 9 in..Internal dimensions: 19.75 in. x 11 in. x 7.6 in..Limited lifetime warranty.⚠ WARNING:WARNING. This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Made to withstand the rigors of your adventures, this case is dust, crush, and waterproof for thorough protection of your gear. E-coated steel latches and integrated locks keep your case and items secure. The interior features zippered compartments, compression straps, and a liner made from 420D recycled ripstop polyester. Transport options include an oversized carry handle, a multistage retractable handle, plus smooth-rolling Hinomoto multidirectional spinner wheels..Hardsided carry-on suitcase with a multistage retractable handle, four 360-degree spinner wheels, and is designed for rugged travel and gear protection.Waterproof hard case ensures your photography equipment stays safe and dry on any shoot.TSA-approved 3-digit lock keeps your valuable photography gear secure during travel.Carry-on suitcase designed to meet airline size requirements for overhead storage.Exterior Dimensions (LxWxD): 22 x 14 x 9.1".Interior Dimensions (LxWxD): 18.6 x 11.78 x 7.24".Features a proprietary polypropylene blend body with a hardshell design, a solid pattern, and a sand color.Multiple compartments with zippered sections and compression straps for organized storage.Designed for adult travelers seeking durable and secure carry-on luggage.Keep your gear organized and protected during travel with the 22" ATX Hardsided Carry-On Roller Case from Pelican.

Made to withstand the rigors of your adventures, this case is dust, crush, and waterproof for thorough protection of your gear. E-coated steel latches and integrated locks keep your case and items secure. The interior features zippered compartments, compression straps, and a liner made from 420D recycled ripstop polyester. Transport options include an oversized carry handle, a multistage retractable handle, plus smooth-rolling Hinomoto multidirectional spinner wheels..Hard-sided check-in suitcase with a multi-stage retractable handle, four 360-degree spinner wheels, and is built for rugged travel and gear protection.Travel worry-free with a waterproof hard case that protects your photography gear from moisture.TSA-approved combination lock keeps your valuable equipment secure during any journey.Interior (L×W×D): 22 x 15.7 x 8.72 in, Exterior (L×W×D): 26 x 18 x 10.6 in.Made from a proprietary hard-shell polypropylene blend, it has a solid pattern and black color.Features multiple interior compartments, including zippered sections and compression straps for organized packing.Suitable for adults seeking durable, high-performance luggage for rugged travel.Lightweight yet robust, this Pelican case offers portability without compromising durability.Keep your gear organized and protected during travel with the 25" ATX Hardsided Check-In Roller Case from Pelican.