Weatherproof Equipment Case
11 results
The Yellow Eylar SA00001 Standard Waterproof and Shockproof Gear Hard Case with Foam Insert is designed to secure your gear for transport or storage. A crushproof, folding carry handle makes this case easy to transport or store inside of a backpack or other small bag. The equipment case is injection-molded from reinforced, high-pressure polypropylene plastic that is waterproof and crushproof. Its adaptive pressure-equalization valve releases built-up air pressure allowing for atmospheric compensation when transported at high or low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed, applying pressure to a rubber gasket that is molded to the perimeter of the case. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The SA00001 hard equipment case comes with 3 layers of foam designed to keep your valuables firmly in place — 2 fully customizable pull-and-pluck cubed foam layers and 1 layer of egg-crate foam padding for the lid. 2 press-and-pull snap latches secure the full length of the case. 2 padlock-adaptable fittings allow for secure storage at home or on the go. Uniform ridges on the top and bottom create an in-line stackable design for multi-case transport. The outer dimensions are 13.37 in. x 11.62 in. x 6 in. while the inner storage area is 11.81 in. x 8.87 in. x 5.18 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).2 customizable pull and pluck layers, 1 top egg crate layer, and 1 bottom liner padding layer protect your gear.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.0.25-in. padlock hasps allow you to add your own padlock to keep valuables secure.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Edge-to-edge crushproof protection up to 3,000 lbs. of directly dispersed weight.Meets TSA requirements with lockable hasps and fittings.External dimensions: 13.37 in. x 11.62 in. x 6 in..Internal dimensions: 11.81 in. x 8.87 in. x 5.18 in..Limited lifetime warranty.Yellow.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Gray Eylar SA00002 Large Waterproof and Shockproof Gear Hard Case with Foam Insert gives extra protection to your contents with 1 customizable pull-and-pluck cubed foam layer, 2 solid foam layers, and 1 layer of egg-crate foam padding. It also makes for safer traveling with its pressure equalizing knob. The hard case comes in a convenient size, making it easy to store inside a backpack or luggage and makes it ideal for storing cameras, electronics, and more. The outer dimensions are 19.78 in. x 15.77 in. x 7.41 in. while the inner storage area is 18.06 in. x 12.89 in. x 6.72 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear; provides waterproof protection for up to 3.2 ft. (1 m) of being fully submerged thanks to its rubber gasket lining.Ideal for standard DSLR camera, lenses, and accessories.2 customizable pull-and-pluck cubed foam layers, 1 egg crate foam layer, and 1 solid foam layer protect your gear.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Meets TSA requirements with lockable hasps and fittings.Stackable design.External dimensions: 19.78 in. x 15.77 in. x 7.41 in..Internal dimensions: 18.06 in. x 12.89 in. x 6.72 in..Limited lifetime warranty.Gray.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Black Eylar SA00022 Small Waterproof and Shockproof Gear and Camera Hard Case with Foam Insert is ideal for storing cameras, electronics, tools, and more. The pluck-and-pull foam along with its sturdy design will safely store sensitive items during travel or on the go. This case is IP67 waterproof, dustproof, and shockproof. The hard case includes 3 layers of foam—1 egg-crate top liner layer, 1 pull-and-pluck customizable layer, and 1 solid bottom pad layer. An innovative pressure equalization valve allows the case to quickly equalize to different air pressures when traveling from different altitudes. A rubber gasket lines the rim of the case, so when it’s latched closed it creates a waterproof seal. 2 padlock hasps allow this case to be secured with padlocks and meet TSA requirements for transport. The outer dimensions are 10.62 in. x 9.68 in. x 4.87 in. while the inner storage area is 9.25 in. x 7.12 in. x 4.12 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67); rubber gasket lines case’s rim to create a waterproof seal when latched closed.Ideal for cameras, lenses, mobile devices, and small gear.1 customizable pull-and-pluck layer, 1 egg-crate top pad layer, and 1 solid bottom layer pad.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.2 padlock hasps allow you to add your own padlock to keep valuables secure.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Meets TSA requirements with lockable hasps and fittings.External dimensions: 10.62 in. x 9.68 in. x 4.87 in..Internal dimensions: 9.25 in. x 7.12 in. x 4.12 in..Limited lifetime warranty.Black.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Green Eylar SA00001 Standard Waterproof and Shockproof Gear Hard Case with Foam Insert is designed to secure your gear for transport or storage. A crushproof, folding carry handle makes this case easy to transport or store inside of a backpack or other small bag. The equipment case is injection-molded from reinforced, high-pressure polypropylene plastic that is waterproof and crushproof. Its adaptive pressure-equalization valve releases built-up air pressure allowing for atmospheric compensation when transported at high or low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed, applying pressure to a rubber gasket that is molded to the perimeter of the case. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The SA00001 hard equipment case comes with 3 layers of foam designed to keep your valuables firmly in place — 2 fully customizable pull-and-pluck cubed foam layers and 1 layer of egg-crate foam padding for the lid. 2 press-and-pull snap latches secure the full length of the case. 2 padlock-adaptable fittings allow for secure storage at home or on the go. Uniform ridges on the top and bottom create an in-line stackable design for multi-case transport. The outer dimensions are 13.37 in. x 11.62 in. x 6 in. while the inner storage area is 11.81 in. x 8.87 in. x 5.18 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).2 customizable pull and pluck layers, 1 top egg crate layer, and 1 bottom liner padding layer protect your gear.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.0.25-in. padlock hasps allow you to add your own padlock to keep valuables secure.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Edge-to-edge crushproof protection up to 3,000 lbs. of directly dispersed weight.Meets TSA requirements with lockable hasps and fittings.External dimensions: 13.37 in. x 11.62 in. x 6 in..Internal dimensions: 11.81 in. x 8.87 in. x 5.18 in..Limited lifetime warranty.Green.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Eylar SA00007 XXL Waterproof and Shockproof Gear Hard Transport Roller Case with Foam Insert combines heavy-duty protection with the ease of transportation. A tough outer shell allows for shock resistance while a strong seal creates water protection. Inside, there is compartmentalized foam to keep belongings safe and organized. A lockable handle pulls out to carry the box with sturdy wheels. Its air pressure equalizer knob lets you compensate for altitude while traveling. 4 layers of foam keep your valuables securely in place. This protective trolley case is ideal for traveling with heavy and sensitive items such as cameras, laptops, electronics, tools, accessories, and equipment. Clamps on top shut the box while its grooves make it easy to stack. External dimensions are 31.1 in. x 23.42 in. x 14.37 in. while internal dimensions are 28.34 in. x 20.47 in. x 11.02 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).Ideal for cameras, laptops, electronics, tools, and equipment with space for power cables and accessories.4 layers of foam protect your gear—1 customizable pluck-and-pull foam, 1 solid layer foam, 1 solid pad, and 1 top egg-crate foam.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Roller wheels and extendable handle for easy transport.External dimensions: 31.1 in. x 23.42 in. x 14.37 in..Internal dimensions: 28.34 in. x 20.47 in. x 11.02 in..Limited lifetime warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Black Eylar SA00006 XL Waterproof and Shockproof Transport Roller Hard Case with Foam Insert is designed to secure your gear for transport or storage. Roller wheels and an extendable handle let you move this rugged equipment case with ease. Its adaptive pressure-equalization valve releases built-up air pressure allowing for atmospheric compensation when transported at high or low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed, applying pressure to a rubber gasket that is molded to the perimeter of the case. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The SA00006 hard equipment roller case comes with 4 layers of foam designed to keep your valuables firmly in place — 1 customizable pull-and-pluck cubed foam layer, 1 solid foam layer, 1 solid bottom pad, and 1 top egg-create layer. 2 press-and-pull snap latches secure the full length of the case..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).4 layers of foam protect your gear—1 customizable pluck-and-pull foam, 1 solid layer foam, 1 solid pad, and 1 top egg-crate foam.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Roller wheels and extendable handle for easy transport.Meets TSA requirements with lockable hasps and fittings.Outer dimensions: 23.75 in. x 20 in. x 11.75 in..Inner storage area: 22.25 in. x 17.25 in. x 10.12 in. (lid included).⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Green Eylar SA00010 Waterproof and Shockproof Gear and Camera Hard Case with Foam Insert is designed to secure your gear for transport or storage. The equipment case is injection-molded from reinforced, high-pressure polypropylene plastic that is waterproof and crushproof. Its adaptive pressure-equalization valve releases built-up air pressure allowing for atmospheric compensation when transported at high or low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed, applying pressure to a rubber gasket that is molded to the perimeter of the case. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The SA00010 hard equipment case comes with 3 layers of foam designed to keep your valuables firmly in place — 1 fully customizable pull-and-pluck cubed foam layer, 1 solid layer pad, and 1 layer of egg-crate foam padding for the lid. 2 press-and-pull snap latches secure the full length of the case. 2 padlock-adaptable fittings allow for secure storage at home or on the go. Uniform ridges on the top and bottom create an in-line stackable design for multi-case transport. The outer dimensions are 11.65 in. x 8.35 in. x 3.78 in. while the inner storage area is 10.54 in. x 6.04 in. x 3.16 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).Ideal for cameras, mobile devices, gear, and lenses.1 customizable pull-and-pluck layer, 1 solid layer pad, and 1 egg-crate top pad layer.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.0.25-in. padlock hasps allow you to add your own padlock to keep valuables secure.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Edge-to-edge crushproof protection up to 3,000 lbs. of directly dispersed weight.Meets TSA requirements with lockable fittings.External dimensions: 11.65 in. x 8.35 in. x 3.78 in..Internal dimensions: 10.54 in. x 6.04 in. x 3.16 in..Limited lifetime warranty.Green.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Black Eylar SA00034 22-In. Carry-on Travel Roller Waterproof Equipment Hard Case with Foam Insert is designed to secure your equipment for transport or storage. It is sized to fit in standard overhead storage compartments for air travel. It meets TSA’s strict requirements for transport on airplanes in the USA. This case is IP67 waterproof, dustproof, and shockproof and a rubber gasket lines the rim of the case, so when it’s latched closed, it creates a waterproof seal. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The hard case includes 4 layers of foam—1 egg-crate top liner layer, 2 pull-and-pluck customizable layers, and 1 solid bottom pad layer. Press-and-pull snap latches secure the full length of the hard case and 2 padlock-adaptable fittings allow for secure storage at home or on the go. An innovative pressure equalization valve allows the case to quickly equalize to different air pressures when traveling from different altitudes. The outer dimensions are 22 in. x 13.81 in. x 9 in. while the inner storage area is 19.75 in. x 11 in. x 7.6 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67); rubber gasket lines rim of case, to create waterproof seal when latched closed.Ideal for cameras, lenses, electronics, and tools; designed to fit standard overhead airline compartments in the USA; TSA-friendly.4 layers of foam protect your gear-1 top egg-crate foam, 2 customizable pluck-and-pull foam layers, and 1 solid bottom layer of foam.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.2 padlock-adaptable hasps.Roller wheels and extendable handle for easy transport.External dimensions: 22 in. x 13.81 in. x 9 in..Internal dimensions: 19.75 in. x 11 in. x 7.6 in..Limited lifetime warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Protect student Chromebooks 24/7 with the slim and budget-friendly Explorer Slim Work-In case. Designed for lightweight carrying and always-on protection, this sleek case offers a perfect balance of functionality and affordability, with a handy elastic pocket that stretches to accommodate accessories and lays flat when not in use, maintaining the slim profile. Durable carry handles provide a secure grip while the optional MAXCases Universal Shoulder Strap adds hands-free carry options. The molded interior honeycomb pattern provides airflow to keep devices cool. Perfectly sized to accommodate virtually any 14-inch Chromebook/laptop..This laptop bag have following features Laptop Bag Style : Sleeve , Screen Size: 14 inches, Main Compartment Closure Type: Zipper. Designed for lightweight carrying and always-on protection, perfect for Chromebooks and laptops.Material used in this bag is Ballistic nylon exterior with padded, soft-touch lining. Pattern is Solid and Color of this bag is Black..Has the following dimensions: Height: 12 inches Width: 10 inches Depth: 2 inches.It posses a practical and versatile strap and handle it has ergonomic top handles for easy carrying. it includes a shoulder strap. The shoulder strap is adjustable and removable, providing flexibility for different carrying preferences..Designed with advanced materials and sealed seams to ensure complete protection against water ingress, keeping your belongings dry in any environment with its water proof technology..contains two compartments: Main Compartment: The primary storage area with a zipper closure, designed to hold your laptop or device. Front Pocket: An additional pocket with interior compartments for accessories, secured with a zipper..It is TSA checkpoint friendly..Comes with a limited lifetime warranty.
The MAXCases Explorer Bag Slim 11" (MCEBS11BLK) is a sleek, lightweight, and durable laptop sleeve designed for 11-inch devices. It combines a cover and carrying case for always-on protection, ensuring your laptop stays safe from drops, scratches, and dirt. The ballistic nylon exterior provides weather-resistant durability, while the padded, soft-touch lining adds extra protection. A handy elastic pocket stretches to accommodate accessories and lays flat when not in use, maintaining the slim profile1. It also features ergonomic top handles for comfortable carrying and an optional, removable shoulder strap for hands-free convenience.Laptop Bag Style is Sleeve and it can have Screen Size: Up to 11.9 inches with Main Compartment Closure Type is Zipper. This Bag Protects and transports laptops and devices up to 11.9 inches.Material use in this bag is Ballistic nylon exterior with padded, soft-touch lining. Pattern used is Solid and the Color is Black.Has the following dimensions: Height: 12 inches Width: 9 inches Depth: 2 inches.It Posses a practical and versatile strap and handle it has ergonomic top handles for easy carrying. it includes a shoulder strap. The shoulder strap is adjustable and also removable, providing flexibility for different carrying preferences..Built to withstand splashes, spills, and light rain, ensuring reliable performance in wet conditions with its water-resistant Technology..It contains two compartments: Main Compartment: The primary storage area with a zipper closure, designed to hold your laptop or device. Front Pocket: An additional pocket with interior compartments for accessories, secured with a zipper..It is TSA checkpoint friendly..Comes with a limited lifetime warranty
This case is designed to protect your RAID system and accessories when moving to a different location. The injection-molded case is made of HPX resin, which is virtually unbreakable as well as dent- and shatter-resistant, and is lightweight, airtight, and watertight. Aside from protection, the case sports a retractable, telescoping handle as well as rugged in-line wheels to help you get to your destination. For comfort, the handle features a double-layered, soft-grip design. Each of the four Press & Pull latches opens with a push of a button but stays secure under impact or stress. To automatically adjust air pressure without letting in water, a permanently attached Vortex valve is on board. In addition, molded-in hasps support standard-sized padlocks for security..Protective travel case designed to safeguard and transport the G-SPEED Shuttle XL storage system during shipping or travel.Specifically engineered for G-Technology G-SPEED Shuttle XL with custom foam insert for Evolution Series drive modules.High-strength HPX resin shell with durable custom foam interior for maximum protection.Available in Black color.1 Protective Case with custom foam insert.Custom foam insert designed to cradle the G-SPEED Shuttle XL and two Evolution Series drive modules.Integrated compartment for storing power and interface cables.Equipped with Press & Pull latches for secure closure and easy opening.Features in-line wheels and a telescoping handle for convenient transport.Watertight, crushproof, and dustproof design with automatic Vortex valve for pressure equalization.Two padlockable hasps for added security.Backed by Pelican’s Limited Lifetime Warranty.The G-Technology G-SPEED Shuttle XL iM2720 Protective Case is a Pelican iM2720 Storm case that comes with a custom foam insert, which holds your G-SPEED Shuttle XL RAID array system, cords, and two Evolution series drives.