Waterproof Electronics Cases

The Black Eylar SA00022 Small Waterproof and Shockproof Gear and Camera Hard Case with Foam Insert is ideal for storing cameras, electronics, tools, and more. The pluck-and-pull foam along with its sturdy design will safely store sensitive items during travel or on the go. This case is IP67 waterproof, dustproof, and shockproof. The hard case includes 3 layers of foam—1 egg-crate top liner layer, 1 pull-and-pluck customizable layer, and 1 solid bottom pad layer. An innovative pressure equalization valve allows the case to quickly equalize to different air pressures when traveling from different altitudes. A rubber gasket lines the rim of the case, so when it’s latched closed it creates a waterproof seal. 2 padlock hasps allow this case to be secured with padlocks and meet TSA requirements for transport. The outer dimensions are 10.62 in. x 9.68 in. x 4.87 in. while the inner storage area is 9.25 in. x 7.12 in. x 4.12 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67); rubber gasket lines case’s rim to create a waterproof seal when latched closed.Ideal for cameras, lenses, mobile devices, and small gear.1 customizable pull-and-pluck layer, 1 egg-crate top pad layer, and 1 solid bottom layer pad.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.2 padlock hasps allow you to add your own padlock to keep valuables secure.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Meets TSA requirements with lockable hasps and fittings.External dimensions: 10.62 in. x 9.68 in. x 4.87 in..Internal dimensions: 9.25 in. x 7.12 in. x 4.12 in..Limited lifetime warranty.Black.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Gray Eylar SA00002 Large Waterproof and Shockproof Gear Hard Case with Foam Insert gives extra protection to your contents with 1 customizable pull-and-pluck cubed foam layer, 2 solid foam layers, and 1 layer of egg-crate foam padding. It also makes for safer traveling with its pressure equalizing knob. The hard case comes in a convenient size, making it easy to store inside a backpack or luggage and makes it ideal for storing cameras, electronics, and more. The outer dimensions are 19.78 in. x 15.77 in. x 7.41 in. while the inner storage area is 18.06 in. x 12.89 in. x 6.72 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear; provides waterproof protection for up to 3.2 ft. (1 m) of being fully submerged thanks to its rubber gasket lining.Ideal for standard DSLR camera, lenses, and accessories.2 customizable pull-and-pluck cubed foam layers, 1 egg crate foam layer, and 1 solid foam layer protect your gear.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Meets TSA requirements with lockable hasps and fittings.Stackable design.External dimensions: 19.78 in. x 15.77 in. x 7.41 in..Internal dimensions: 18.06 in. x 12.89 in. x 6.72 in..Limited lifetime warranty.Gray.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Yellow Eylar SA00001 Standard Waterproof and Shockproof Gear Hard Case with Foam Insert is designed to secure your gear for transport or storage. A crushproof, folding carry handle makes this case easy to transport or store inside of a backpack or other small bag. The equipment case is injection-molded from reinforced, high-pressure polypropylene plastic that is waterproof and crushproof. Its adaptive pressure-equalization valve releases built-up air pressure allowing for atmospheric compensation when transported at high or low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed, applying pressure to a rubber gasket that is molded to the perimeter of the case. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The SA00001 hard equipment case comes with 3 layers of foam designed to keep your valuables firmly in place — 2 fully customizable pull-and-pluck cubed foam layers and 1 layer of egg-crate foam padding for the lid. 2 press-and-pull snap latches secure the full length of the case. 2 padlock-adaptable fittings allow for secure storage at home or on the go. Uniform ridges on the top and bottom create an in-line stackable design for multi-case transport. The outer dimensions are 13.37 in. x 11.62 in. x 6 in. while the inner storage area is 11.81 in. x 8.87 in. x 5.18 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).2 customizable pull and pluck layers, 1 top egg crate layer, and 1 bottom liner padding layer protect your gear.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.0.25-in. padlock hasps allow you to add your own padlock to keep valuables secure.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Edge-to-edge crushproof protection up to 3,000 lbs. of directly dispersed weight.Meets TSA requirements with lockable hasps and fittings.External dimensions: 13.37 in. x 11.62 in. x 6 in..Internal dimensions: 11.81 in. x 8.87 in. x 5.18 in..Limited lifetime warranty.Yellow.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Keep your device safe and secure with the Samsung Galaxy Tab 10" Plastic Waterproof Carrying Case in sleek black. Designed for maximum durability, this case provides waterproof protection, shielding your tablet from spills, splashes, and unexpected weather conditions. Its sturdy plastic construction offers impact resistance, helping to guard against bumps and drops while maintaining a slim and lightweight profile. Perfect for travel, outdoor adventures, or everyday use, this reliable carrying case ensures your Samsung Galaxy Tab stays protected without sacrificing style. Whether commuting to work or using your device in demanding environments, this secure and practical case is built to handle it all..Samsung Galaxy Tab 10 inch Carrying Case.Plastic material in solid black.Dimensions: 6.9"H x 10.3"W x 1"D.Adjustable Laptop Bag Straps & Handle.Waterproof.Comes with 1 year warranty.Galaxy Tab Active4 Pro Smartcase's easy-carry shoulder strap and 360-degree rotatable hand grip keep you flexible in the field with one-handed usability.

The Green Eylar SA00001 Standard Waterproof and Shockproof Gear Hard Case with Foam Insert is designed to secure your gear for transport or storage. A crushproof, folding carry handle makes this case easy to transport or store inside of a backpack or other small bag. The equipment case is injection-molded from reinforced, high-pressure polypropylene plastic that is waterproof and crushproof. Its adaptive pressure-equalization valve releases built-up air pressure allowing for atmospheric compensation when transported at high or low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed, applying pressure to a rubber gasket that is molded to the perimeter of the case. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The SA00001 hard equipment case comes with 3 layers of foam designed to keep your valuables firmly in place — 2 fully customizable pull-and-pluck cubed foam layers and 1 layer of egg-crate foam padding for the lid. 2 press-and-pull snap latches secure the full length of the case. 2 padlock-adaptable fittings allow for secure storage at home or on the go. Uniform ridges on the top and bottom create an in-line stackable design for multi-case transport. The outer dimensions are 13.37 in. x 11.62 in. x 6 in. while the inner storage area is 11.81 in. x 8.87 in. x 5.18 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).2 customizable pull and pluck layers, 1 top egg crate layer, and 1 bottom liner padding layer protect your gear.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.0.25-in. padlock hasps allow you to add your own padlock to keep valuables secure.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Edge-to-edge crushproof protection up to 3,000 lbs. of directly dispersed weight.Meets TSA requirements with lockable hasps and fittings.External dimensions: 13.37 in. x 11.62 in. x 6 in..Internal dimensions: 11.81 in. x 8.87 in. x 5.18 in..Limited lifetime warranty.Green.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Green Eylar SA00010 Waterproof and Shockproof Gear and Camera Hard Case with Foam Insert is designed to secure your gear for transport or storage. The equipment case is injection-molded from reinforced, high-pressure polypropylene plastic that is waterproof and crushproof. Its adaptive pressure-equalization valve releases built-up air pressure allowing for atmospheric compensation when transported at high or low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed, applying pressure to a rubber gasket that is molded to the perimeter of the case. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The SA00010 hard equipment case comes with 3 layers of foam designed to keep your valuables firmly in place — 1 fully customizable pull-and-pluck cubed foam layer, 1 solid layer pad, and 1 layer of egg-crate foam padding for the lid. 2 press-and-pull snap latches secure the full length of the case. 2 padlock-adaptable fittings allow for secure storage at home or on the go. Uniform ridges on the top and bottom create an in-line stackable design for multi-case transport. The outer dimensions are 11.65 in. x 8.35 in. x 3.78 in. while the inner storage area is 10.54 in. x 6.04 in. x 3.16 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).Ideal for cameras, mobile devices, gear, and lenses.1 customizable pull-and-pluck layer, 1 solid layer pad, and 1 egg-crate top pad layer.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.0.25-in. padlock hasps allow you to add your own padlock to keep valuables secure.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Edge-to-edge crushproof protection up to 3,000 lbs. of directly dispersed weight.Meets TSA requirements with lockable fittings.External dimensions: 11.65 in. x 8.35 in. x 3.78 in..Internal dimensions: 10.54 in. x 6.04 in. x 3.16 in..Limited lifetime warranty.Green.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Engineered for the most demanding environments, the aXtion Slim MH case offers exceptional protection for your iPad Air 11" (M2). Designed to withstand the challenges of manufacturing, logistics, and warehousing, this rugged, waterproof case shields your device from accidental drops, water exposure, and dust infiltration, ensuring that it remains fully operational in tough industrial settings. the aXtion Slim MH is the ideal solution for professionals in need of reliable protection. Its reinforced corner design features a loop hole for easy attachment of a universal shoulder strap, offering hands-free convenience and improved mobility. The shoulder strap evenly distributes the device's weight across your body, reducing strain during long shifts and ensuring that your iPad Air stays secure while on the go. Additionally, this case provides secure storage and charging for your Apple Pencil, ensuring it remains readily available for use. Whether you're a plant floor supervisor, warehouse manager, or field technician, the aXtion Slim MH gives you the confidence to work in harsh environments, knowing your device is safeguarded against drops, water, and dust..This Rugged and Waterproof Case Designed for mobile professionals in demanding industrial environments. It provides protection against drops, impacts, water, and dust.It is meticulously engineered for the 11-inch iPad Air (M2), ensuring a precise fit and comprehensive protection..Cutouts and Openings: The case has precise cutouts for the camera, speakers, microphone, charging port, and buttons, ensuring easy access to all iPad features. Installation: The case is designed to be easy to install. Simply place your iPad into the case from the top edge, ensuring it clicks into place securely..Clear Back: Transparent back allows for easy asset tag scanning. Silicone Hand Strap: Enhances grip and portability..Has the following dimensions: Height: Approximately 10.39 inches Width: Approximately 8.17 inches Depth: Approximately 1.34 inches ..In the Box: aXtion Slim MH Case: The rugged, waterproof case itself. Silicone Hand Strap: For enhanced grip and easy carrying..Comes with a 1 year limited warranty..Certified to MIL-STD-810H shockproof and IP68 waterproof and dustproof standards.

The Eylar SA00007 XXL Waterproof and Shockproof Gear Hard Transport Roller Case with Foam Insert combines heavy-duty protection with the ease of transportation. A tough outer shell allows for shock resistance while a strong seal creates water protection. Inside, there is compartmentalized foam to keep belongings safe and organized. A lockable handle pulls out to carry the box with sturdy wheels. Its air pressure equalizer knob lets you compensate for altitude while traveling. 4 layers of foam keep your valuables securely in place. This protective trolley case is ideal for traveling with heavy and sensitive items such as cameras, laptops, electronics, tools, accessories, and equipment. Clamps on top shut the box while its grooves make it easy to stack. External dimensions are 31.1 in. x 23.42 in. x 14.37 in. while internal dimensions are 28.34 in. x 20.47 in. x 11.02 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).Ideal for cameras, laptops, electronics, tools, and equipment with space for power cables and accessories.4 layers of foam protect your gear—1 customizable pluck-and-pull foam, 1 solid layer foam, 1 solid pad, and 1 top egg-crate foam.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Roller wheels and extendable handle for easy transport.External dimensions: 31.1 in. x 23.42 in. x 14.37 in..Internal dimensions: 28.34 in. x 20.47 in. x 11.02 in..Limited lifetime warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Black Eylar SA00006 XL Waterproof and Shockproof Transport Roller Hard Case with Foam Insert is designed to secure your gear for transport or storage. Roller wheels and an extendable handle let you move this rugged equipment case with ease. Its adaptive pressure-equalization valve releases built-up air pressure allowing for atmospheric compensation when transported at high or low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed, applying pressure to a rubber gasket that is molded to the perimeter of the case. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The SA00006 hard equipment roller case comes with 4 layers of foam designed to keep your valuables firmly in place — 1 customizable pull-and-pluck cubed foam layer, 1 solid foam layer, 1 solid bottom pad, and 1 top egg-create layer. 2 press-and-pull snap latches secure the full length of the case..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).4 layers of foam protect your gear—1 customizable pluck-and-pull foam, 1 solid layer foam, 1 solid pad, and 1 top egg-crate foam.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Roller wheels and extendable handle for easy transport.Meets TSA requirements with lockable hasps and fittings.Outer dimensions: 23.75 in. x 20 in. x 11.75 in..Inner storage area: 22.25 in. x 17.25 in. x 10.12 in. (lid included).⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Meet the protective case built to safeguard your iPhone 16 and enhance your everyday experience. Engineered to exceed MIL-STD-810H military-grade standards, it offers reinforced protection, giving you the confidence to take your iPhone anywhere, no matter the conditions. But this case is more than just tough; it's designed for ultimate convenience. With MagSafe compatibility and dual corner openings for lanyards or straps, you'll have the freedom to carry your iPhone securely, minimizing the chance of accidental drops..Rugged Protective Case, Compatible with iPhone 16.MagSafe Certified for Seamless Magnetic Attachment.Material: Durable Polycarbonate and TPU; True Color: Black.Waterproof Design for Protection Against Water Damage, Shockproof for Impact Resistance.Built-In MagSafe Compatibility for Easy Accessory Attachment.Wireless Charging Compatible with MagSafe and Qi Chargers.Selling Quantity 1 Unit.Limited Warranty.Textured edges for extra grip.Charging Port cover.Capture Button opening

This fully Waterproof vinyl laptop sleeve with inside neoprene padding will keep your laptop safe and will make you look stylish no matter what..Color/Fabric Type: Navy / 100% Waterproof Tarpaulin Vinyl.Dimensions: 11.5''x8.5''x1''(W x H x D).Padded neoprene interior.100% waterproof Heavy duty Vinyl.2 years against manufacturing defects (for Limited editions, Specialty fabrics and Collaborations only)

The Black Eylar SA00034 22-In. Carry-on Travel Roller Waterproof Equipment Hard Case with Foam Insert is designed to secure your equipment for transport or storage. It is sized to fit in standard overhead storage compartments for air travel. It meets TSA’s strict requirements for transport on airplanes in the USA. This case is IP67 waterproof, dustproof, and shockproof and a rubber gasket lines the rim of the case, so when it’s latched closed, it creates a waterproof seal. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The hard case includes 4 layers of foam—1 egg-crate top liner layer, 2 pull-and-pluck customizable layers, and 1 solid bottom pad layer. Press-and-pull snap latches secure the full length of the hard case and 2 padlock-adaptable fittings allow for secure storage at home or on the go. An innovative pressure equalization valve allows the case to quickly equalize to different air pressures when traveling from different altitudes. The outer dimensions are 22 in. x 13.81 in. x 9 in. while the inner storage area is 19.75 in. x 11 in. x 7.6 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67); rubber gasket lines rim of case, to create waterproof seal when latched closed.Ideal for cameras, lenses, electronics, and tools; designed to fit standard overhead airline compartments in the USA; TSA-friendly.4 layers of foam protect your gear-1 top egg-crate foam, 2 customizable pluck-and-pull foam layers, and 1 solid bottom layer of foam.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.2 padlock-adaptable hasps.Roller wheels and extendable handle for easy transport.External dimensions: 22 in. x 13.81 in. x 9 in..Internal dimensions: 19.75 in. x 11 in. x 7.6 in..Limited lifetime warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Pelican ™ black polypropylene small rugged case measuring 11.62" x 13.37" x 6", has an open cell core with solid wall design to ensure long lasting durability. The O-ring seal of this case blocks out all the dust and water entering into the case. It has automatic pressure equalization valve that balances the pressure built inside the case. The rubber over-molded handles of this case ensures easy portability. It features stainless steel hardware for durability..Comes in black color and has ABS latch/purge body, polymer o-ring, stainless steel pins, 3 micron hydrophobic non-woven purge vent.Dimensions: 11.62"H x 13.37"W x 6"D.Rubber over-molded handle for comfort.Compartments size: 8.87"H x 11.81"W x 5.18"D interior, 4" bottom depth, 5.18" total depth, 0.31 sq ft internal volume.Closure type: Double throw latch.Lid depth: 1.18", Temperature: - 40 to 210 deg F, Buoyancy: 20.06 lbs..Watertight design offers immense resistance to crush, dustproof while o-ring seal provides superior shielding.Has open cell core with solid wall design for strong protection and automatic pressure equalization valve for balancing interior pressure.Pick N Pluck ™ with convoluted lid foam for added safety organization of your contents.Meets IP67, MIL C-4150J, STANAG 4280, Def Stan 81-41 and ATA 300 certifications or standards.Weight: 4.41 lbs. with foam, 3.97 lbs. without foam.Meets IP67, DEF STAN 81-41/STANAG 4280 standards.Weighs up to 4.4 lbs with foam and 4 lbs without foam.Comes with lifetime guarantee of excellence.Pelican™ Hard carrying case with foam in black color provides ultimate protection to any kind of equipments. Features polymer O-ring seal that ensures optimum water resistant.

Whether you're entering a warzone or just a location that seems like one, the Pelican 1495 laptop case will protect your equipment from being damaged by rough handling and tough conditions. This case is watertight, crushproof, and dustproof, so even if you drive through a storm, your laptop will remain safe and secure..Black.Dimensions: 18.87"(H) x 13.12"(W) x 3.81"(D) interior, 21.62"(H) x 17 1/4"(W) x 4.87"(D) exterior.Material: Polyurethane foam interior, high-impact structural copolymer polypropylene exterior.Maximum buoyancy: Floats in salt water with 46.15 lbs. load.Application/usage: Notebook.Compatibility: Notebook - 17" display screen.Maximum screen size supported: 17".Features: Watertight, crushproof, and dust proof.Internal depth: 2.68" base, 1.12" lid.Easy open double throw latches.Padded shoulder strap.Stainless steel padlock protectors.Pick N Pluck with convoluted lid foam.Fold down over molded handle.Automatic pressure equalization valve.Includes 3 dial combination lock.Weight: 8.38 lbs..Warranty: Lifetime limited.Pelican 1495 Laptop Case - Foam-Padded Interior

The Pelican ™ black polypropylene medium shipping case measuring 13.03" x 16.54" x 6.84", has an open cell core with solid wall design to ensure long lasting durability. The O-ring seal of this case blocks out all the dust and water entering into the case. It has automatic pressure equalization valve that balances the pressure built inside the case. The rubber over-molded handles of this case ensures easy portability. It features stainless steel hardware for durability..Comes in black color and has ABS latch/purge body, polymer o-ring, stainless steel pins, 3 micron hydrophobic non-woven purge vent.Dimensions: 13.03"H x 16.54"W x 6.84"D.Rubber over-molded handle for comfort.Compartments size: 10.24"H x 14.66"W x 6.12"D interior, 4.37" bottom depth, 6.12" total depth, 0.53 sq ft internal volume.Closure type: Double throw latch.Lid depth: 1.75", Temperature: - 40 to 210 deg F, Buoyancy: 30 lbs..Watertight design offers immense resistance to crush, dustproof while o-ring seal provides superior shielding.Has open cell core with solid wall design for strong protection and automatic pressure equalization valve for balancing interior pressure.Pick N Pluck ™ with convoluted lid foam for added safety organization of your contents.Meets IP67, MIL C-4150J, STANAG 4280 and Def Stan 81-41 certifications or standards.Weight: 6.39 lbs. with foam, 5.51 lbs. without foam.Comes with lifetime warranty.Weighs up to 6.4 lbs with foam and 5.5 lbs without foam.Comes with lifetime guarantee of excellence.Pelican™ 1450 Series case with foam in black color measures 14.62" x 10.18" x 6" and provides ultimate protection to any kind of equipments. Features polymer O-ring seal.

When sleek and simple is what you're after, this streamlined neoprene sleeve provides basic protection at an outstanding value. Offers lightweight carrying with hideaway side handle and optional shoulder strap for hands-free ease. Vertical zipper is ideal for grabbing device quickly from backpacks and lockers..Sleeve-style cover protects your device against bumps and scratches.Compatible with tablets.Comes in black and made of neoprene; protects from water, dust, drops, dirt, and scratches.Sleeve style case

Designed and engineered by LifeProof to keep pace with your pursuits, OtterBox Fre with MagSafe, the waterproof iPhone 14 Plus case, is sealed to go everywhere and built using 50% recycled plastic. Always slim with a modern silhouette, OtterBox Fre with MagSafe is tough and sustainable. It works seamlessly with MagSafe chargers and accessories to keep pace at home in the office, the ocean and the gallery opening..Always slim with a modern silhouette this case is compatible with iPhone 14.Made with more than 50% recycled plastic, including 25% ocean-based recycled plastic; comes in black.Designed to interact with Apple's MagSafe ecosystem.Works with Apple's MagSafe charger and Qi Wireless charging.Specially designed for enhanced mobile experience.Waterproof for 6.56' up to one hour.5X as many drops as military standard.Built-in screen protector and port covers for 360 protection.Simplify with OtterBox cases, power and accessories for MagSafe built-in magnets.Works with 5G networks