Standalone Access Points

The Cisco Catalyst access points are the next generation of enterprise access points. They are resilient, secure, and intelligent. We are more dependent on our wireless networks than ever before. Additional devices connect to the network every year, and the Cisco Catalyst access points will provide a seamless experience anywhere for everyone. Going beyond the Wi-Fi 6 (802.11ax) standard, the access point provides integrated security, resiliency, and operational flexibility as well as increased network intelligence. Extending intent-based network and perfect for networks of all sizes, the Cisco Catalyst scales to the growing demands of IoT while fully supporting the latest innovations and new technologies and is a leader in performance, security, and analytics. The Cisco Catalyst access points, paired with Cisco DNA, are enterprise-class products that will address your current and future needs. These access points are the first step in updating your network so that you can take better advantage of all of the features and benefits that Wi-Fi 6 provides..Access point for indoor environments, with internal antennas provides a seamless experience anywhere for everyone.Dimensions: 8.5"H x 8.5"W x 1.7"D.Comes in white.Wi-Fi 6 (802.11ax) delivers a better experience in typical environments with more predictable performance for advanced applications such as 4K or 8K video, high-density, high-definition collaboration apps, all-wireless offices, and IoT.Features software-defined radio (SDR) that can perform advanced RF spectrum analysis and delivers other features, such as Cisco CleanAir, wireless intrusion prevention system (wIPS), and DFS detection.Orthogonal frequency-division multiple access (OFDMA) based scheduling splits the bandwidth into smaller chunks called resource units (RUs), which can be allocated to individual clients in both the downlink and uplink directions to reduce overhead and latency.Supporting four spatial streams, multi-user, multiple-input, multiple-output (MU-MIMO) enables access points to split spatial streams between client devices, to maximize throughput.Spatial reuse allows the access points and their clients to differentiate between BSSs, thus permitting more simultaneous transmissions.Target wake time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the access point.Intelligent Capture probes the network and provides Cisco DNA Center with deep analysis.Flexible radio assignment allows the access points to intelligently determine the operating mode of serving radios based on the RF environment.Dual 5GHz radio support enables both radios to operate in 5GHz client serving mode, allowing industry-leading 5.2Gbps (2 x 2.6Gbps) over-the-air speeds while increasing client capacity.Application hosting helps future-proof and simplify IoT deployments by eliminating the need to install and manage overlay networks.Provides uplink speeds of 2.5Gbps, in addition to 100Mbps and 1Gbps.Features Integrated Bluetooth Low Energy (BLE) 5 radio to enable IoT use cases such as location tracking and wayfinding.Enables edge computing capabilities for IoT applications on the host access point.Creates an optimal mobile experience for iOS devices on corporate networks based on Cisco technologies.Lifetime manufacturer limited warranty

The Cisco Catalyst 9115 series with Wi-Fi 6 is the next generation of enterprise access points. They are resilient, secure, and intelligent. The Catalyst 9115 series access points, paired with the Cisco Digital Network Architecture (Cisco DNA), are enterprise-class products that will address both your current and future needs. They are the first step in updating your network to take better advantage of all of the features and benefits that Wi-Fi 6 provides. With the Catalyst 9115 series, you can secure remote workers or the micro-office. Any Cisco Aironet or Catalyst access point can function as an OfficeExtend access point (OEAP). With an OEAP, an employee at home or in a temporary micro-office will have access to the corporate SSID and the corporate network without the need to set up a VPN or have any advanced technical know-how..Access point with internal antennas for indoor environments.Management console port (RJ45); 1 x 100, 1000, 2500 Multigigabit Ethernet (RJ45): IEEE 802.3bz; USB 2.0 (enabled via future software).Dimensions: 1.7"H x 8"W x 8"D.Integrated antenna: 2.4GHz, 3dBi peak gain, internal antenna, omnidirectional in azimuth; 5GHz, 4dBi peak gain, internal antenna, omnidirectional in azimuth.IEEE 802.11ax emerging standard, also known as High-Efficiency Wireless (HEW) or Wi-Fi 6, builds on 802.11ac.OFDMA-based scheduling splits the bandwidth into smaller chunks called Resource Units (RUs), which can be allocated to individual clients in both the downlink and uplink directions to reduce overhead and latency.New power-saving mode called Target Wake Time (TWT) allows the client to stay asleep and wake up only at prescheduled (target) times to exchange data with the AP.Integrated Bluetooth Low Energy (BLE) 5.0 radio to enable IoT use cases such as location tracking and wayfinding.Lifetime manufacturer limited warranty

The AP 330 is WatchGuard's all-purpose Wi-Fi 6 access point and is the ideal choice for mid-density indoor environments of all sizes to utilize the most secure WPA3 encryption for a seamless experience. Includes 2x2 radio scanning optimized for Wi-Fi 6 with six internal antennas. Maximum TX power delivers 22 dBm and a 2dBi antenna gain with one Ethernet port supporting up to 2.5 Gbps. These Wi-Fi 6 access points deliver a maximum data rate for a seamless wireless experience by supporting up to 1.2 Gbps on the 5 GHz band and 574 Mbps available on the 2.4 GHz band. WatchGuard’s AP130, AP330, AP430CR, and AP432 requires an active Management License. Select from a Standard or USP Management License to activate and access WatchGuard Cloud. The Management License is required to activate and manage the WatchGuard access points..The WatchGuard AP330 operates on dual bands: the 2.4 GHz and 5 GHz frequencies. It is designed for medium-density indoor environments, such as offices, schools, and retail spaces, providing reliable and high-efficiency Wi-Fi 6 connectivity..It supports the Wi-Fi 6 (802.11ax), standard up to 1.2 Gbps on the 5 GHz band and 0.574 Gbps on the 2.4 GHz band..The WatchGuard AP330 supports PoE (Power over Ethernet) 54V DC 802.3at (PoE+).Supports high-efficiency wireless connectivity with WPA3 encryption..Connector, Port or Interface Types are 1 x 2.5 Gbps Ethernet port (PoE+), 1 x USB port (currently not in use), 1 x RJ45 serial console port..Included Components are Access point unit, mounting hardware, quick start guide..Power Source PoE 54V DC 802.3at..This device have Frequencies of 2.4 GHz and 5 GHz bands..Its has The Restriction of Hazardous Substances (RoHS) is a standard..The WatchGuard AP330 comes with a standard 1-year warranty

Powerful and affordable 5 GHz sector access point. GPS synchronized units provide up to 450+ Mbps data throughput. Introducing the Ubiquiti airMAX LiteAP AC, the latest high-performance access point with disruptive pricing. Featuring an ultra-lightweight form factor, the Ubiquiti airMAX LiteAP AC was designed to be an affordable cost/performance solution for long-distance, wireless broadband bridging. Each of these models operates in the worldwide, license-free 5 GHz frequency range with high-performance speeds..Powerful access point that creates a wireless local area network.Dimensions: 14.21"H x 4.9"W x 2.81"D.Comes in white.Equipped with 10/100/1000 Ethernet port.Minimal fasteners simplify installation.Ball-joint mount provides adjustment flexibility for versatile mounting options.Features a lightweight antenna with an integrated radio in a sleek design.Delivers high throughput over its wired connection.Precise GPS frame synchronization enables colocated devices to transmit and receive data without interfering with each other, allowing for better frequency reuse and increased network stability.Integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Pole mounting kit included.Meets or exceeds FCC, IC, CE standards.2-year manufactuer limited warranty

Weatherproof and temperature hardened, Aruba 570 Series access points deliver the highest Wi-Fi 6 performance in outdoor and environmentally challenging locations. The high-performance and high power 570 Series APs deliver maximum capacity and range. It delivers 4x4:4SS MU-MIMO capability, Aruba's advanced ClientMatch and integrated Bluetooth to enable Aruba location services..AP-577 (US) 802.11ax 2x2:2/4x4:4 dual radio integrated directional antenna outdoor AP.Built in 90°H x 90°V directional antennas: 5 GHz (antennas 5.6dBi), 2.4 GHz (antennas 6.8dBi), BLE/Zigbee (Integrated omnidirectional antennas with peak gain of 8.4dBi).Ports: one HPE SmartRate port (RJ-45), one 100/1000BASE-T (RJ-45), USB-C.Security: WPA3 and Enhanced Open, MPSK enables simpler passkey management for WPA2 devices, a secure SSL/IPSec VPN tunnel and installed TPM for secure storage of credentials, keys and boot code.Dimensions: 5.6"H x 9.0"W x 8.7"D.Lifetime manufacturer limited warranty

The gigabit dual-band indoor/outdoor access point OAP1200 offers a concurrent data rate as high as 1167 Mbps. Equipped with 2 omni-directional high-gain antennas, OAP1200 provides a maximum coverage radius of 200 meters. OAP1200 can be installed either on the wall or around a pole. OAP1200 can meet different requirements by connecting antennas of different specifications to the standard RP-SMA connectors. With the IP65 enclosure, OAP1200 is designed for wireless coverage in factories, warehouses and other harsh outdoor environments..Tenda OAP1200 Outdoor Gigabit Wi-Fi Access Point is a dual-band device that provides high-speed internet connectivity for outdoor areas.Supports the 802.11ac wireless standard, offering a data transfer rate of up to 1167 Mbps on the 5 GHz band..Offers wireless connectivity through the 802.11ac wireless standard.Powered by MU-MIMO technology, a single OAP1200 can communicate with multiple wireless clients at the same time.OAP1200 allows clients that support either 2.4 GHz or 5 GHz band, or both, to connect to it at the same time.Achieve a concurrent data rate of 1167 Mbps, enabling seamless connectivity for multiple devices.With 2 omni-directional high-gain antennas, enjoy a maximum coverage radius of 200 meters, ensuring robust wireless signals across long distances..Mount the OAP1200 on walls or poles for versatile deployment options tailored to your environment.

The NanoStation AC represent the next evolution of the iconic CPE design that revolutionized the wireless ISP industry. The NanoStation AC provides a secondary Ethernet port with software-enabled PoE. Use this port to conveniently power an external device, such as a PoE security camera, for seamless IP video integration. NanoStation AC model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. The NanoStation AC feature enhanced protection against ESD events. airOS8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..Access point has a dedicated Wi-Fi radio for management and is suitable for indoor and outdoor installations.Dimensions: 10.12"H x 3.31"W x 1.18"D.Compatible with airOS 8.Comes in white and made of UV-resistant polycarbonate.Powerful wireless features: access point PtMP airMAX mixed mode, airMAX ac protocol support, long-range point-to-point (PtP) link mode; selectable channel width: PtP (10/20/30/40/50/60/80MHz), PtMP (10/20/30/40MHz); automatic channel selection; transmit power control: automatic/manual; automatic distance selection (ACK timing); strong WPA2 security.Usability enhancements: airMagic channel selection tool, dynamic configuration changes, instant input validation, HTML5 technology, optimization for mobile devices, detailed device statistics, comprehensive array of diagnostic tools, including RF diagnostics and airView spectrum analyzer.Features airMAX technology and a dedicated Wi-Fi radio for management.This model utilizes the latest ESD protection to help protect against power surges.The radio and antenna are combined into a single body that takes up minimal space.No fasteners are required for pole‑mounting, and a single wall fastener (not included) is required for wall-mounting.Power supply: 24V, 0.5A Gigabit PoE supply (included); maximum power consumption: 9W.Power method: 802.3af alternative A (pairs 1, 2+; 3, 6 return); 24V passive PoE (pairs 4, 5+; 7, 8 return); gain: 16dBi.Networking interface: 10/100/1000MB/s Ethernet ports; channel bandwidths: 10/20/30/40/50/60/80MHz.Processor specs: Atheros MIPS 74Kc, 560MHz; memory: 64MB DDR2; cross-pol isolation: 20dB minimum.Polarization: dual linear; LEDs: power, Eth1, Eth2; signal strength.Operating temperature: -40 degrees Fahrenheit to 158 degrees Fahrenheit.Operating humidity: 5 to 95% noncondensing.ETSI300-019-1.4 shock and vibration.Meets or exceeds CE, FCC, IC standards

The AP 430 CR is perfect for high-density deployments that include an industrial-rated IP67 enclosure, designed for either indoor or rugged outdoor deployment with superior Wi-Fi 6 performance and secure WPA3 encryption. Includes six external antennas to deliver a maximum TX power of 23dBm. One ethernet port is included to support up to 5 Gbps and includes one gigabit PoE+ port. Lightning-fast speed crafts an unwavering connectivity executed through a total of 2402 Mbps the 5 GHz band and 574 Mbps delivered on the 2.4 GHz band. Integrated 4x4 radio chains and streams to deliver a secure and seamless network experience. WatchGuard's AP130, AP330, AP430CR, and AP432 requires an active Management License. Select from a Standard or USP Management License to activate and access WatchGuard Cloud. The Management License is required to activate and manage the WatchGuard access points. Requires 6 external antennas (WG9004) sold separately..Dual-band (2.4 GHz and 5 GHz) designed for outdoor use in harsh environments..Max Data rate up to 574 Mbps available on the 2.4 GHz band, Max Data rate up to 2.3 Gbps on the 5 GHz band.Supports PoE (802.3at) and Wi-Fi 6 standard..Offers MU-MIMO for efficient multiple device connectivity..1-GbE-RJ45 Ports 1x 5-GbE-RJ45 Ports 1x PoE Powered Device (PD) PoE-PD Ports.Package Contents AP430CR Outdoor Access Point Wall Mount Plate Pole Mount Clamp.Powered via PoE or optional DC power adapter..Operates on 2.4 GHz and 5 GHz frequencies with enhanced range..IP67-rated for dust and water resistance, compliant with FCC, CE, and RoHS..Comes with a 1-year limited hardware warranty.Support for up to eight individual SSIDs per radio allows for maximum flexibility in network design.Lightning-fast speed crafts an unwavering connectivity experience executed by 2402 Mbps on the 5 GHz band and 574 Mbps delivered on the 2.4 GHz band

Weatherproof and temperature hardened, Aruba 570 Series access points deliver the highest Wi-Fi 6 performance in outdoor and environmentally challenging locations. The high-performance and high power 570 Series APs deliver maximum capacity and range. It delivers 4x4:4SS MU-MIMO capability, Aruba's advanced ClientMatch and integrated Bluetooth to enable Aruba location services..AP-575 (US) 802.11ax 2x2:2/4x4:4 dual radio integrated omni-antenna outdoor AP.Built in omni directional antennas: 5 GHz (antennas 5dBi), 2.4GHz (antennas 3.4dBi), BLE/Zigbee (integrated omnidirectional antenna and the peak gain of 6dBi).Ports: one HPE SmartRate port (RJ-45), one 100/1000BASE-T (RJ-45), USB-C.Security: WPA3 and Enhanced Open, MPSK enables simpler passkey management for WPA2 devices, a secure SSL/IPSec VPN tunnel and installed TPM for secure storage of credentials, keys and boot code.Dimensions: 10.6"H x 9.4"W x 9.4"D.Lifetime manufacturer limited warranty

The Grandstream GWN7603 is a compact Wave-2 Wi-Fi access point designed for small businesses, hotels, and home offices. With dual-band 2×2:2 MU-MIMO technology and four Gigabit Ethernet ports, it delivers up to 1.27Gbps wireless throughput and supports over 100 concurrent clients. Featuring PoE/PoE+ support, embedded controller management, and advanced QoS, the GWN7603 ensures flexible deployment and reliable performance in low-to-medium density environments..Dual-band indoor use with compact access point functionality..AC1300 standard and 1270Mbps wireless data transfer performance..PoE/PoE+ and integrates Wi-Fi 5 for efficient connectivity..802.11 a/b/g/n/ac wireless connectivity protocols..4x 1G Ethernet ports, reset pinhole, and Kensington lock..Mounting kits and a quick installation guide for setup..Powered via Ethernet using 802.3af/802.3at PoE standards..2.4GHz and 5GHz bands for reliable indoor coverage..Certified under FCC, CE, RCM, IC for global compliance..1-year manufacturer warranty.

Introducing the airMAX LiteAP AC, the high-performance access point from Ubiquiti Networks. Featuring an ultra-lightweight form factor, the LiteAP AC was designed to be an affordable cost/performance solution for long-distance, wireless broadband bridging. Operates in the worldwide, license-free 5GHz frequency range with high-performance speeds. The LiteAP AC combines proprietary hardware and software technologies to deliver its breakthrough combination of throughput and range with cost-effective value. The ball-joint mount provides adjustment flexibility for versatile mounting options. Minimal fasteners simplify installation. No tools are needed; only a single wrench is required for pole-mounting..This access point provides high-performance solution for long-distance, wireless broadband bridging.Dimensions: 17.81"H x 2.14"W x 3.1"D.IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Delivers up to 450Mbps real TCP/IP throughput and features an efficient form factor.Features a lightweight antenna with an integrated radio in a sleek design.Operates in the worldwide, license-free 5GHz frequency range.Networking interface: 10/100/1000 Ethernet port.Antenna gain: 16dBi.Power supply: 24V/0.5A Gigabit PoE adapter (included).Power method: passive PoE (pairs 4, 5+; 7, 8 return).The ball-joint mount provides adjustment flexibility for versatile mounting options.No tools are needed for installation; only a single wrench is required for pole-mounting.Operating temperature: -40 to 158 degrees Fahrenheit; operating humidity: 5 to 95% noncondensing.Meets or exceeds FCC and RoHS standards.1 Year Warranty

Aruba Instant On AP11 Indoor access points include an easy to use web GUI and templates so access points are up and running in minutes. Comes with an integrated virtual controller for simple deployment of multiple access points. The Aruba Instant On AP11 indoor access point is built with premium hardware and software quality that's as reliable as coming from a trusted vendor. Effortless set-up right out of the box – in the palm of your hand..Entry-level wireless access points for small and growing businesses.Up to 867Mbps wireless data rate.Uplink Gigabit Ethernet port, with POE-in support.Dimensions: 1.3" x 6" x 6".DC power: 12V.Dual radio for simultaneous dual-band operation: 5GHz for up to 867Mbps wireless data rate and 2.4GHz for up to 300Mbps wireless data rate.Meets or exceeds UL 2043 plenum rating, EN 60601-1-1 and EN 60601-1-2, Wi-Fi Alliance standards.Support for WPA2/WPA3 protected employee and guest login with Enhanced Open for per user guest access.Ships with a (black) mount clip to attach to suspended ceiling rails, and a (white) mount clip to attach to solid surfaces (wall/ceiling).1-year manufacturer limited warranty

The WatchGuard AP332CR is designed for medium-density deployments and is IP67-rated to enable use in outdoor and rugged environments. This dual-band access point delivers fast, reliable coverage with a 2x2 radio and four external, omnidirectional antennas offering up to 1.2 Gbps on the 5 GHz band. A single PoE+ port is included to support data rates up to 2.5 Gbps. Utilizing WatchGuard Cloud for deployment and configuration, the AP332CR offers a seamless experience with Wi-Fi 6 performance and WPA3 encryption ? making it ideal for building easily scalable networks across school campuses, public hotspots, and smaller manufacturing environments..Dual-band (2.4 GHz and 5 GHz) for outdoor/rugged environments..Wi-Fi 6 (802.11ax) with up to 2.4 Gbps (5 GHz) and 574 Mbps (2.4 GHz)..One PoE+ port supporting up to 2.5 Gbps, Wi-Fi 6 standard..Provides MU-MIMO for efficient, multiple device connectivity..Interfaces/Ports Ethernet Technology 2.5 Gigabit Ethernet Number of Network (RJ-45) Ports 1 PoE PD Port.Package Contents AP332CR Outdoor/Rugged Access Point 4 x Omnidirectional External Antennas.Powered via PoE or optional DC power input..Operates on 2.4 GHz and 5 GHz bands for wide coverage..IP67-rated for dust and water resistance, compliant with FCC, CE, and RoHS..Comes with a 1-year limited warranty.One PoE+ port supporting up to 2.5 Gbps

The Cisco Catalyst 9130AX series access points are the next generation of enterprise access points. They are resilient, secure, and intelligent. With the emergence of high-density networks and the Internet of Things (IoT), we are more dependent on wireless networks than ever before. Increasing numbers of devices connect to the network every year, ranging from high-performance client devices to low-bandwidth IoT devices. Cisco Catalyst 9130AX series access points provide a seamless experience anywhere for everyone, with high scaling and unmatched performance in diverse network deployments. Going beyond the Wi-Fi 6 (802.11ax) standard, the 9130AX series provides integrated security, resiliency, and operational flexibility as well as increased network intelligence. Extending Cisco's intent-based network and perfect for networks of all sizes, the Cisco Catalyst 9130AX Series scales to meet the growing demands of IoT while fully supporting the latest innovations and new technologies. The 9130AX series is also a leader in performance, security, and analytics. The Cisco Catalyst 9130AX series access points, paired with the Cisco Digital Network Architecture (Cisco DNA), are enterprise-class products that will address both your current and future needs. They are the first step in updating your network to take better advantage of all of the features and benefits that Wi-Fi 6 provides..This access point provides integrated security, resiliency, and operational flexibility as well as increased network intelligence.Provides up to 5.38Gbps (8x8 80MHz or dual 4x4 80+80MHz on 5GHz and 4x4 20MHz on 2.4GHz).Contains 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ45): IEEE 802.3az, management console port (RJ45), and USB 2.0 at 4.5W (enabled via future software).Dimensions: 1.88"H x 8.9"W x 8.9"D.Meets or exceeds IEC, EN, UL, CAN/CSA, AS/NZS, ICES, VCCI-CISPR, RSS standards.Delivers a better experience in typical environments with more predictable performance for advanced applications such as 4K or 8K video, high-density, high-definition collaboration apps, all-wireless offices, and IoT.The Cisco RF Application-Specific Integrated Circuit (ASIC) is a fully integrated Software-Defined Radio (SDR) that can perform advanced RF spectrum analysis and delivers features such as Cisco CleanAir, Wireless Intrusion Prevention System (WIPS), FastLocate, and Dynamic Frequency Selection (DFS) detection.Orthogonal Frequency-Division Multiple Access (OFDMA)-based scheduling splits the bandwidth into smaller frequency allocations called Resource Units (RUs), which can be assigned to individual clients in both the downlink and uplink directions to reduce overhead and latency.Supporting eight spatial streams, Multiuser Multiple Input, Multiple Output (MU-MIMO) enables access points to split spatial streams between client devices to maximize throughput.Power-saving mode called Target Wake Time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the access point.Comes in white.Lifetime manufacturer limited warranty

Ubiquiti introduces the airCube a cost-effective wireless access point for use in your customer deployments. It offers convenient PoE passthrough to power a 24V airMAX CPE device, so you can use a single PoE adapter to power this device. Management options feature a graphical user interface designed for streamlined setup and control. The Ubiquiti airCube can be installed and configured using the UNMS (Ubiquiti Network Management System) app on your mobile phone or tablet. Web UI enables a standalone utility for basic configuration..Home Wi-Fi access point for use in your customer deployments.Dimensions: 3.52"H x 3.46"W x 3.51"D.Designed to interoperate with airMAX CPEs.Comes in black and made of plastic.Features four 10/100 fast Ethernet ports.Wireless speeds of up to 300Mbps in the 2.4GHz radio band.Wi-Fi standard: 802.11n, 2x2 MIMO technology.Its attractive design means it can be positioned anywhere in the room, improving Wi-Fi performance.Innovative super antenna provides wide-area coverage beyond regular Wi-Fi access points.Use the intuitive UNMS mobile app for iOS and Android to install and configure the device.Can be powered by and provide power to airMAX CPE using 24V passive PoE or 5V power adapter with Micro-USB (not included).LED lights up when the device is powered on.Meets or exceeds FCC standard.1-year manufacturer limited warranty

i24 is a gigabit dual-band ceiling access point that compliant with IEEE 802.11ac Wave 2, and offers a concurrent data rate up to 1167 Mbps. Powered by MU-MIMO technology, letting you enjoy better experience. And the built-in omni-directional antennas broaden the wireless coverage of a single AP. In addition, you are allowed to adjust its transmit power as required using the web UI, and use an IEEE 802.3at-compliant PoE sourcing equipment to power on it, achieving long-distance power supply without tampering your existing grid network. You are also allowed to use Tenda access controllers (AC) to configure and manage multiple i24 in a centralized manner..Access point operates on two wireless bands . The dual-band capability allows for more flexible and efficient wireless connectivity, making it suitable for both home and small business environments..Supports the 802.11ac Wave 2 wireless standard. It offers a maximum data transfer rate of 1167 Mbps (1.167 Gbps).This access point supports Power over Ethernet (PoE). it adheres to the Wi-Fi 5 standard, ensuring high-speed and reliable wireless connectivity..Provides robust wireless connectivity with the following features: Dual-Band Support: Operates on both 2.4 GHz and 5 GHz bands for flexible and efficient connectivity..includes the following connector, port, and interface types: One 10/100/1000 Mbps Ethernet Port (PoE) RESET Button SYS LED Indicator.In the box : Tenda I24 Access Point Power Adapter (DC: 12V 1A) Ethernet Cable User Manual Quick Installation Guide.Can be powered using: Power over Ethernet (PoE) DC power adapter (DC: 12V 1A).Certified by : Restriction of Hazardous Substances (RoHS)..Comes with a 3 year limited warranty.

To meet the increasing needs and volumes of connected devices, Aruba Instant On is announcing its first Wi-Fi 6 access point: AP22. Delivering higher capacity and greater performance at a competitive price, the AP22 is the perfect access point for small businesses with expanding mobile, cloud, and IoT requirements. Wi-Fi Certified 6 AP22 access points deliver faster Wi-Fi speeds, greater capacity, and reduced latency between access points and devices for a superior Wi-Fi experience. With the AP22, you can upgrade your Wi-Fi network to boost performance across devices now, while preparing it for more mobile and IoT devices in the future. Already have a demanding mobile and/or IoT environment? Delivering 4x the capacity of 802.11ac access points, the AP22 can provide an exceptional user experience in a broad variety of scenarios. Remote offices. Hybrid classrooms. Hotels and restaurants. Reimagined retail and hospitality. The AP22 can handle them all without breaking a sweat. Want to make wires a thing of the past? Combine the AP22 with Smart Mesh Wi-Fi for complete wireless coverage. The Aruba Instant On AP22, at every level, is designed for rapid deployment and simplified management. Be it mounting hardware, or remote device management, or having access to the latest business-grade software, the AP22 lives to make your life easier..Gain insights into customers with third party captive portal integration with partners like Skyfii, Purple, Aislelabs, and Wavespot..Instant On supports Facebook Wi-Fi, so when people access the Wi-Fi at your locations, they are redirected through your business’ Facebook page..Block undesired applications and websites with greater traffic visibility without the need for any external gateway or additional costs – the control is at your fingertips..Stop unwanted people and bots from accessing your network. Leverage advanced features that do not require external gateways - or the complexity that comes with them. Quickly and easily swap it out with another AP in a single click, in case of gateway failure..Get full visibility into the apps running on your network. Block certain applications from being used. Manage this feature straight from the Aruba Instant On app..Customize the experience with logos, authentications, and rules of use. Apply bandwidth rates. Set data usage per app. Limit duration of use. Use an external portal or service like Facebook Wi-Fi. Create open guest networks for quick and easy access..Control network widths, channels, and channel widths to suit your specific environment. Keep users happy as they move between spaces or meetings with a seamless handoff between APs. Just provide secure WPA2 or WPA3 authentication on your networks and Aruba will do the rest..Manage multiple sites, multiple networks, distributed deployments, and multi-tenancy deployments with ease through Aruba's cloud-hosted web interface and mobile app. Create unique configurations, statistics, guest portals, and admin read/write and read-only privileges for every site..Fast 802.11ax, 2X2:2.Wi-Fi Certified 6 (Wi-Fi 6).MU-MIMO performance.Smart Mesh Wi-Fi support.Built-in Wi-Fi router/gateway functionality.Integrated Bluetooth.Easy-to-use web and mobile app for setup and management.Secure Guest Wi-Fi with simple setup.Application classification, control and visibility.Aruba Instant On AP22 Indoor Access Points have built-in wireless mesh capabilities to cost-effectively extend Wi-Fi connectivity without additional cables.

Enhance your small-to-midsize business with fast and reliable Wi-Fi connections by connecting the Cisco Business 240AC Dual-Band Wireless Access Point to your compatible network router or switch. This kit includes three dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 2333 Mb/s over the 2.4 GHz and 5 GHz frequencies. Both of the 240AC's Gigabit Ethernet ports support 802.3af/at power over Ethernet, allowing you to transfer both data and power over a single cable, which can be passed through to IP cameras and other devices when connected to a compatible switch..Dual-Band Wireless Access Point.Wi-Fi 5 (802.11ac) Wave 2.Up to 2333 Mb/s Throughput.2.4 GHz / 5 GHz (Dual-Band).Internal Omnidirectional Antennas.2 x Gigabit Ethernet PoE Ports.4x4 MIMO.Wall & Ceiling Mountable.Works with Cisco Business Mobile App.Warranty Limited Lifetime

The UniFi Controller v4 software is a powerful, enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities, the UniFi virtual control plane allows for unlimited scalability under one centralized controller..Type of Product: Wireless Access Point.Adapter Speed: 1300Mbit/s.Number of ports and Type: Gigabit Ethernet 2, PoE PD Port.Dimensions as H x W x D in inches: 7.7 x 7.7 x 1.4.Power Rating/Voltage: DC Input Power, Consumption 9 W.Frequency Range: 2.4 GHz, 5 GHz Dual-Band.Support/Encryption: Guest Portal/Hotspot Support.Warranty 1 Year.Form factor: Wall mountable, ceiling mountable.Wireless transmission speed: 1.27 Gbps, 2.4 GHz speed: 450 Mbps, 5 GHz speed: 1300 Mbps.Have 200+ concurrent clients.Supports guest traffic isolation.Intuitive UniFi controller software delivers powerful performance and intelligent switching.Design: Expandable.Contains wall/ceiling kits.Meets CE, FCC, IC certifications and standards.The UniFi AC Pro AP features the latest Wi-Fi 802.11ac, 3x3 MIMO technology in a refined industrial design and is ideal for deployment of maximum‑performance wireless networks.

The TP-LINK AX3000 dual-band Wi-Fi 6 access point is designed for business environments requiring high-performance Wi-Fi. Next-era business Wi-Fi 6 with speeds up to 2976Mbps brings more than twice the speed of Wi-Fi 5. Every application feels more fluid with drastically improved Wi-Fi speeds. Wi-Fi 6 features such as OFDMA and MU-MIMO handle multiple clients across congested environments like typical office spaces, lodging, and hospitals. Enjoy faster speeds on more devices with less lag..Dual-band Wi-Fi 6 access point designed for business environments requiring high-performance Wi-Fi.Offers simultaneous 574Mbps on 2.4GHz and 2402Mbps on 5GHz (2976Mbps in total) Wi-Fi speeds.Supports both 802.3at PoE+ and DC (adapter included) power supply for flexible installations.Includes 1 x Gigabit Ethernet (RJ45) port.Package includes: access point, power adapter, ceiling/wall mounting kits, and installation guide.Power supply: 802.3at PoE, 12VDC, or 48V passive PoE.Frequencies: 2.4GHz and 5GHz.Meets or exceeds the CE, FCC, and RoHS standards.Doubles the data at peak transmission times on a single stream with HE160.Omada mesh enables wireless connectivity between access points for extended range and flexible deployment.Omada SDN integration manages the whole network locally or from the cloud via web UI or the Omada app.Intelligent self-organization optimizes the best path between EAPs, while self-healing ensures you stay online even when one AP is disrupted.Ensures that customers enjoy uninterrupted streaming when moving around by switching clients automatically to the access points with the optimal signal.Exceptional performance with compact design ensures simple Wi-Fi installation while saving space.With advanced enterprise security, WPA3 provides more data security for previously unsecured and open Wi-Fi hot spots.System requirements: Microsoft Windows XP/Vista/7/8/10/11 or Linux.2-year manufacturer limited warranty

The Ubiquiti UniFi UAP-AC-PRO 1300 Mbps wireless access point is a cost-effective solution for developing high-performance wireless networks. This wireless access point features the latest Wi-Fi 802.11ac technology in a refined industrial design for reliable performance. This white access point measuring 1.4" x 7.7" dia, has two 10/100/1000 Ethernet ports/interfaces for connectivity. It supports wireless data transmission rate up to 1300 Mbps at 5 GHz frequency band and 450 Mbps at 2.4 GHz frequency band..Wireless access point to connect your wireless devices to a wired network.Dimensions: 1.4"H x 7.7"Dia.Color: White.Wireless LAN standard: IEEE 802.11ac.Ports/interfaces: Two 10/100/1000 Ethernet.Wireless transmission speed: 1300 Mbps (5 GHz), 450 Mbps (2.4 GHz).Frequency band: 2.4 GHz/5 GHz.Operating range: 122 m.Antenna: Three internal MIMO.Wireless security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES).Power consumption: 9 W.Advanced traffic management: VLAN, Advanced QoS, Guest Traffic Isolation, WMM, 200+ concurrent clients.Mounting: Wall/ceiling.Includes wall/ceiling kits.Meets CE, FCC, IC certifications and standards.Weight: 12.4 oz., 15.9 oz. (with mounting kit)

The multifunctional Aruba 203R Remote AP delivers secure and fast 802.11ac wireless and wired network access to corporate resources for branch and home offices.: Unique in the industry, the compact Aruba 203R remote AP is software configurable to operate in either 1x1 dual radio mode, or 2x2 single radio mode. It supports up to 867Mbps in the 5GHz band or up to 400Mbps in the 2.4 GHz band when operating in single radio 2x2 mode. In dual radio 1x1 mode, the maximum data rates for the 203R AP are 433Mbps in the 5GHz band and 200Mbps in the 2.4GHz band. The 203R AP offers a variety of enterprise-class features, including role-based network access, policy-based forwarding, and Adaptive Radio Management (ARM), which gives remote workers the same high-quality Wi-Fi experience they get at corporate headquarters. When additional capacity is desired, this low-cost 203R AP can be quickly added to an existing Aruba WLAN to improve network performance. Managed by the Aruba Mobility Controller, the 203R AP supports centralized configuration, data encryption, policy enforcement and network services. It extends corporate resources to remote locations by establishing site-to-site VPN tunnels to the data center. With an integrated Aruba Beacon, the 203R AP simplifies the remote management of a large scale network of battery-powered BLE Aruba Beacons and provides advanced location and indoor wayfinding, and proximity-based push notification capabilities. For large installations across multiple sites, the Aruba Activate service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, APs can configure themselves when powered up, slashing the cost and time to deploy wireless in remote branches and home offices. UNIQUE BENEFITS: Deploy with or without controller: The 203R can be deployed in either controller-based (ArubaOS) or controllerless (InstantOS) deployment mode. New 802.11ac flexible radio architecture: The 203R AP is software configurable to operate in either 1x1 dual radio mode, or 2x2 single radio mode. Supports up to 867Mbps in the 5GHz band (with 2SS/VHT80 clients) or up to 400Mbps in the 2.4 GHz band (with 2SS/VHT40 clients). In 1x1 dual radio mode, these max speeds are up to 433Mbps (5GHz) and 200Mbps (2.4GHz). Built-in Bluetooth Low-Energy (BLE) radio : Delivers location-based services for BLE-enabled mobile devices. Enables management of your deployment of battery-powered Aruba Beacons. Advanced Cellular Coexistence (ACC) : Minimizes the impact from out-of-band interference from sources such as 3G/4G cellular networks..When connected to a compatible router or a network switch, this wireless access point lets you enjoy wireless internet connectivity throughout your home or office.Ensure speedy data transfer of up to 867 Mbit/s with the IEEE 802.11ac wireless technology.Gigabit Ethernet port for ultra-fast wired network speeds.Its management capability provides efficient control over setup and configuration of your network

Classic NanoStation design with updated proprietary airMAX ac chipset and dedicated management Wi-Fi for easy UISP mobile app support and fast setup. Excellent solution for a simple PtP bridge or use as a PtMP station (CPE)..Compact, UISP-ready WiFi radio sporting a classic NanoStation design and an updated airMAX AC chipset.More than 450Mbps real TCP/IP throughput.2 x 10/100/1000 Mbps Ethernet ports.Dimensions: 7.05" x 3.05"W x 2.33"D.Surge protection should be used for all outdoor installations.Supported voltage range: 24V ±10%.5GHz operating frequency.Meets or exceeds CE, FCC, IC standards.2 years manufacturer limited warranty

These economical Wi-Fi 6 access points provide high-performance connectivity for any organization experiencing growing mobile, cloud and IoT requirements. With a wireless aggregate data rate of up to 1.5 Gbps and gigabit local wired ports, they deliver the range of connectivity options needed for venues such as hotels, residence halls, and remote offices alike. The Aruba 503H series APs are designed to optimize user experience by maximizing Wi-Fi efficiency and dramatically reducing airtime contention between clients. Features include Orthogonal frequency-division multiple access (OFDMA), and cellular optimization. With up to two spatial streams (2SS) and 80MHz channel bandwidth, the 503H series provides groundbreaking wireless capabilities for budget-conscious deployments.This access point provides high performance and cost-effective Wi-Fi 6 (802.11ax) for hospitality, branch, and teleworker deployments.With a wireless aggregate data rate of up to 1.5Gbps, delivers the range of connectivity options needed for venues such as hotels, residence halls, and remote offices alike.Contains three Ethernet wired network ports (RJ45) with auto-sensing link speed (10/100/1000BASE-T) and MDI/MDX.Dimensions: 5.9"H x 3.39"W x 1.57"D.Maximum power consumption: 10W DC powered, 11.4W POE powered.Two integrated semi-directional antennas for 2 x 2 MIMO with peak single antenna gain of 2.5dBi in 2.4GHz and 5.6dBi in 5GHz; built-in antennas are optimized for vertical wall or desk-mounted orientation of the AP.Meets or exceeds the FCC/ISED, CE, IEC/EN standards.Combine wireless and wired access in a single compact form factor.Perfect for organizations with work-from-home or teleworker initiatives.Built-in technology that resolves sticky client issues for Wi-Fi 6 and Wi-Fi 5 devices.Lifetime manufacturer limited warranty

The Ubiquiti® airCube-AC Series ACB-AC-US wireless access point in black, has a sleek design with durable plastic construction. It features 4 Gigabit Ethernet ports with data transfer rate of up to 1.14 Gbps. The dual band access point utilizes 802.11ac and 2x2 MIMO technologies for reliable performance. It has throughput of up to 300 Mbps in 2.4 GHz radio band and up to 866.7 Mbps in 5 GHz radio band. This access point with super antenna, ensures UNMS and U mobile support. It is suitable for use in your customer deployments..Wi-Fi access point is perfect for use in customer deployments.Dimensions: 3.52"H x 3.51"W x 3.46"D.Comes in black color with plastic construction.Interfaces/ports: 4 x Gigabit Ethernet port.Wireless LAN: 802.11ac 2x2.Gain: 4 dBi at 2.4 GHz, 5 dBi at 5 GHz.Frequency: Dual band 2.4 GHz, 5 GHz simultaneously.Power supply: 24 Volt PoE or 24 Volt PSU in on LAN port 1.Wireless transmission speed: 1.14 Gbps.Maximum power consumption: 8.5 W, temperature: -10 to 50 deg C (operating), humidity: 5 to 95 percent noncondensing (operating).Throughput: Up to 300 Mbps in the 2.4 GHz radio band, Up to 866.7 Mbps in the 5 GHz radio band.Features UNMS support, super antenna, U mobile support and sleek design.Features 22 dBm maximum TX power, status LED and UNMS app for fast setup from a mobile device.Features PoE pass-through, Powers airMAX device, with PoE in/out, controllable 24 V PoE out on WAN port technology.Meets CE, FCC, IC standards.Weight: 9.88 oz.

This kit includes five dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 1167 Mb/s over the 2.4 GHz and 5 GHz frequencies. The 140AC's Gigabit Ethernet port supports passive 802.3af power over Ethernet (PoE), allowing you to transfer both data and power over a single cable when connected to compatible devices. Alternatively, you can power the device with a separately purchased PoE injector..Type of Product/Use: Dual-Band Wireless Access Point.Adapter Speed: 1167 Mbps.Number of ports and Type: 1 Gigabit Ethernet (RJ45) (Uplink) PoE, 1 Ethernet (RJ45) (Console).Dimensions as H 1.3 x W 5.9 x D 5.9 in inches.Installation Info: Wall & Ceiling Mountable.Power Rating/Voltage: 8 W.Supported Protocols: MAC Filtering, RADIUS.Warranty: Limited Lifetime.Enhance your business with fast and reliable Wi-Fi connections by connecting the Cisco Business 140AC Dual-Band Wireless Access Point to your compatible network router or switch.

Small businesses are facing a number of challenges - challenges that need constant attention. The right technology can help you stay on top of them and stay ahead of the curve. Technologies like the ones found inside the AP22. To meet the increasing needs and volumes of connected devices, Aruba Instant On is announcing its Wi-Fi 6 access point: AP22. Delivering higher capacity and greater performance at a competitive price, the AP22 is the perfect access point for small businesses with expanding mobile, cloud, and IoT requirements. Wi-Fi 6 AP22 access points deliver faster Wi-Fi speeds, greater capacity, and reduced latency between access points and devices for a superior Wi-Fi experience. With the AP22, you can upgrade your Wi-Fi network to boost performance across devices now, while preparing it for more mobile and IoT devices in the future.Already have a demanding mobile and/or IoT environment? Delivering 4x the capacity of 802.11ac access points, AP22 can provide an exceptional user experience in a broad variety of scenarios. Remote offices. Hybrid classrooms. Hotels and restaurants. Reimagined retail and hospitality. The AP22 can handle them all without breaking a sweat.Wi-Fi plays the critical role in business today. No business can't afford downtime. The Aruba Instant On AP22, at every level, is designed for rapid deployment and simplified management. Be it mounting hardware, or remote device management, or having access to the advanced business-grade software, the AP22 lives to make your life easier..Conveniently expands your network to hard-to-wire areas – nearly eliminating spotty connections and dead zones, providing Wi-Fi where you need it..Aruba Instant On AP22 Indoor Access Points come with integrated Wi-Fi Alliance security standard WPA2/WPA3 and Enhanced Open support for protected wireless access..Aruba Instant On AP22 Indoor Access Points are ideal for single or distributed small business sites such as graphic design firms, cafés, restaurants, and other Wi-Fi hotspots..Allows access points (APs) to handle multiple Wi-Fi 6-capable clients on each channel simultaneously - regardless of device or traffic type. This improves efficiency by boosting overall capacity, while reducing latency..Ideal for IoTs that communicate infrequently, TWT establishes a schedule for when clients need to communicate with an AP. This helps reduce power consumption, extending the battery life of clients..Allows you to serve multiple clients (Wi-Fi 5 and Wi-Fi 6) at the same time..Enables a 25% data increase over 256 QAM, improving throughput in your access points and devices..Aruba Instant On access points have an installed TPM for secure storage of credentials, keys, and boot codes..Allows the network to assign a "color" tag to a channel and reduce the threshold for interference. Network performance is improved because APs on the same channel can be closer together and still transmit at the same time - as long as they are different colors..Uses built-in filtering to automatically minimize the impact of interference from cellular networks, distributed antenna systems (DAS), and commercial small-cell or femtocell equipment..Delivers high-efficiency error correction for increased throughput..Stop unwanted people and bots from accessing your network. Leverage advanced features that do not require external gateways - or the complexity that comes with them. Quickly and easily swap it out with another AP in a single click, in case of gateway failure..Every customer has different environment. They might want to authenticate with the ISP's PPPoE server and provide static IP to the APs..Keep users connected via softphones and mobile apps. Automatically detect and prioritize voice and video applications such as Skype, FaceTime, and WeChat that use SIP, SCCP and other popular protocols..Aruba Instant On AP22 Indoor Access Points have built-in wireless mesh capabilities to cost-effectively extend Wi-Fi connectivity without additional cables.

Ubiquiti Networks designed airMAX AC radios for high performance and ease of installation. You have the freedom to deploy the Bullet AC anywhere in the world, as it allows for a high degree of flexibility in configuring channel bandwidths (subject to local country regulations. The Bullet AC eliminates the need to use RF cables and requires no special antenna or tools to install. There are no radio card / host board issues, no RF cable quality concerns, no mechanical stability concerns, and no enclosure mounting requirements. With the Bullet AC, operators can just plug in and go..Access Point is a fully integrated radio that delivers up to 300+ Mb/s real TCP/IP throughput.Dimensions: 7.48"H x 1.81"W x 1.81"D.Access point covers both 2.4GHz and 5GHz radio bands, covering a wide range of frequencies that work well for both short- and long-distance links.Meets or exceeds CE, FCC, and IC certifications.Networking interface: Gigabit Ethernet port; antenna connector: N-type connector.Throughput 160+ Mb/s at 2.4GHz, 300+ Mb/s at 5GHz.Maximum power consumption: 8W; output power: 22dBm.Power supply: 24VDC, 0.3A (minimum); power method: 24V passive PoE (pairs 4, 5+; 7, 8 return).ESD/EMP protection: +/- 24kV contact/air.Operating temperature: -40 degrees Fahrenheit to 158 degrees Fahrenheit.Operating humidity 5% to 95% noncondensing.ETSI300-019-1.4 shock and vibration.1-year manufacturer limited warranty

The Aruba 505H series access points are designed to optimize user experience by maximizing Wi-Fi efficiency and dramatically reducing airtime contention between clients. Features orthogonal frequency-division multiple access (OFDMA), multi-user MIMO and cellular optimization. With up to two spatial streams (2SS) and 80MHz channel bandwidth, the 505H series provides groundbreaking wireless capabilities for budget-conscious deployments. Provides high-performance connectivity for any organization experiencing growing mobile, cloud and IoT requirements. With a wireless aggregate data rate of up to 1.5 Gbps and Gigabit local wired ports, it delivers the range of connectivity options needed for venues such as hotels, residence halls, and remote offices alike..Hospitality access point provides high-performance connectivity for any organization experiencing growing mobile, cloud, and IoT requirements.Dimensions: 5.9"H x 3.39"W x 1.85"D.Comes in white.Uplink interfaces: smart rate Ethernet wired network port (RJ45) (auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX, 2.5Gbps speed complies with NBase-T and 802.3bz specifications, 802.3az Energy Efficient Ethernet (EEE), POE-PD: 48Vdc (nominal) 802.3af/at/bt POE (class 3, 4 or 6).Local interfaces: 4 x Ethernet wired network ports (RJ45).Combine wireless and wired access in a single compact form factor.Perfect for organizations with work-from-home or teleworker initiatives.Supports up to 1.5Gbps of maximum wireless throughput.Built-in technology that resolves sticky client issues for Wi-Fi 6 and Wi-Fi 5 devices.AI-powered ClientMatch technology eliminates sticky client issues by placing Wi-Fi 6 capable devices on the best available AP.MPSK enables simpler passkey management for WPA2 devices: should the Wi-Fi password on one device or device type change, no additional changes are needed for other devices.Can be used to establish a secure SSL/IPSec VPN tunnel to a Gateway or Mobility Controller that is acting as a VPN concentrator.Meets or exceeds FCC/ISED, CE Marked, RED Directive 2014/53/EU, EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, IEC/EN 60950, EN 60601-1-1, EN60601-1-2, IEC/EN 62368-1 standards.Lifetime manufacturer limited warranty

This kit includes dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 1167 Mb/s over the 2.4 GHz and 5 GHz frequencies. The 140AC's Gigabit Ethernet port supports passive 802.3af power over Ethernet (PoE), allowing you to transfer both data and power over a single cable when connected to compatible devices. Alternatively, you can power the device with a separately purchased PoE injector..Type of Product/Use: Dual-Band Wireless Access Point.Adapter Speed: 1167 Mbps.Number of ports and Type: 1 Gigabit Ethernet (RJ45) (Uplink) PoE, 1 Ethernet (RJ45) (Console).Dimensions as H 1.3 x W 5.9 x D 5.9 in inches.Installation Info: Wall & Ceiling Mountable.Power Rating/Voltage: 8 W.Supported Protocols: MAC Filtering, RADIUS.Warranty: Limited Lifetime.Enhance your business with fast and reliable Wi-Fi connections by connecting the Cisco Business 140AC Dual-Band Wireless Access Point to your compatible network router or switch.

This kit includes three dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 1167 Mb/s over the 2.4 GHz and 5 GHz frequencies. The 140AC's Gigabit Ethernet port supports passive 802.3af power over Ethernet (PoE), allowing you to transfer both data and power over a single cable when connected to compatible devices. Alternatively, you can power the device with a separately purchased PoE injector..Type of Product/Use: Dual-Band Wireless Access Point.Adapter Speed: 1167 Mbps.Number of ports and Type: 1 Gigabit Ethernet (RJ45) (Uplink) PoE, 1 Ethernet (RJ45) (Console).Dimensions as H 1.3 x W 5.9 x D 5.9 in inches.Installation Info: Wall & Ceiling Mountable.Power Rating/Voltage: 8 W.Supported Protocols: MAC Filtering, RADIUS.Warranty: Limited Lifetime.Enhance your business with fast and reliable Wi-Fi connections by connecting the Cisco Business 140AC Dual-Band Wireless Access Point to your compatible network router or switch.

This affordable Aruba 505 Wi-Fi 6 access point provides high‑performance connectivity for any organization experiencing growing numbers of mobile, IoT and mobility requirements. With a combined peak datarate of up to 1.49Gbps, it delivers the speed and reliability needed for venues and workplaces such as schools, midsize offices and retailers. The 500 Series APs are also designed to optimize user experience by maximizing Wi-Fi efficiency and dramatically reducing airtime contention between clients. Features include Orthogonal frequency-division multiple access (OFDMA), and cellular optimization. With up to 2 spatial streams (2SS) and 80MHz channel bandwidth (HE80), the 500 Series provides groundbreaking wireless capabilities for budget-conscious deployments..Access points provide high-performance connectivity for any organization experiencing growing numbers of mobile, IoT and mobility requirements.Up to 1.49Gbps combined peak datarate.Features an Ethernet port with autosensing link speed (10/100/1000BASE-T), PoE-PD support, and USB 2.0 host interface with Type-A connector capable of sourcing up to 1A/5W to the attached device.Dimensions: 1.46"H x 6.3"W x 6.34"D.Supports direct DC power (12VDC) and Power-over-Ethernet.Indoor, dual radio, 5GHz and 2.4GHz 802.11ax 2x2 MIMO.Featrues WPA3 and Enhanced Open security.Two integrated dual-band down-tilt omnidirectional antennas for 2 x 2 MIMO with peak antenna gain of 4.9dBi in 2.4GHz and 5.7dBi in 5GHz.Built-in technology that resolves sticky client issues for Wi-Fi 6 and Wi-Fi 5 devices.OFDMA for enhanced multi-user efficiency.IoT-ready Bluetooth 5 and Zigbee support.Embedded ranging technology for accurate indoor location measurements

WatchGuard’s high-performance Wi-Fi 6 access point is the ideal choice for high-density indoor environments of all shapes and sizes to utilize the most secure WPA3 encryption for a seamless Wi-Fi 6 experience for end users to enjoy.Dual-band (2.4 GHz and 5 GHz) for high-density environments..Wi-Fi 6 (802.11ax) with up to 4.8 Gbps (5 GHz) and 1.148 Gbps (2.4 GHz)..Supports PoE (802.3at) and Wi-Fi 6 standard..Supports MU-MIMO for multiple device connectivity..2.5 Gigabit Ethernet (GbE) port for wired connectivity..Includes access point unit, mounting hardware, and user guide..Powered via PoE or separate power adapter..Operates on 2.4 GHz and 5 GHz frequency bands..Complies with Wi-Fi 6 (802.11ax), FCC, CE, and RoHS certifications..Comes with a 1-year limited warranty.Qualcomm Cypress IPQ8072A Quad-core A53 ARM processor at 2 GHz with 2 GB RAM and 256 MB Flash

The Grandstream GWN7661E is a sleek in-wall AX3000 Wi-Fi 6 access point designed for offices, hotels, and residential spaces. With dual-band MU-MIMO and OFDMA technology, it delivers up to 3Gbps wireless throughput and supports 256 concurrent clients. Featuring four Gigabit Ethernet ports, PoE/PoE+ support, and embedded controller management, the GWN7661E ensures seamless connectivity for both wired and wireless devices while blending discreetly into any environment..Dual-band in-wall use with enterprise-grade access point design..AX3000 standard and 3000Mbps wireless data transfer performance..PoE/PoE+ and integrates Wi-Fi 6 for modern network efficiency..802.11 a/b/g/n/ac/ax wireless connectivity protocols..Includes 4x 1G Ethernet ports, reset pinhole, and Kensington lock interface..Mounting kits and a quick installation guide for setup..Powered via Ethernet using 802.3af/802.3at PoE standards..2.4GHz and 5GHz bands for reliable indoor coverage..Certified under FCC, CE, RCM, IC for global compliance..1-year manufacturer warranty.

1+km transmission Range O1-5G adopts of internal power amplifier and 9dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 1km..Operating on the 5GHz band, the Tenda O1-5G KIT is ideal for PtP and P2MP applications like video surveillance, internet sharing, and long-range connectivity..Utilizing Wi-Fi 5 (802.11ac) with a maximum speed of 867 Mbps, it ensures fast and reliable wireless communication for data-intensive applications..Supports Power over Ethernet (PoE) and Wi-Fi 5, enabling simplified installation with power and data via a single Ethernet cable..It Offers robust outdoor connectivity with 11AC technology, 867Mbps speeds, and a 9dBi directional antenna for stable 1km connections..Included Components: 5GHz 9dBi 11AC 867Mbps Outdoor CPE, 1 x Power Adapter, 1 x PoE Injector, 1 x Quick Installation Guide.Supports 12V 1A Passive PoE and DC power options, offering flexible and easy installation in various environments..Operates on the 5GHz band, offering high-speed wireless connectivity with less interference than the 2.4GHz band..Features an IP65 waterproof enclosure for protection against dust and water..Certifications & Standards: FCC, CE, RoHS.Comes with 3 years limited warranty.

The Grandstream GWN7660E is a high-performance AX3000 Wi-Fi 6 access point built for medium-to-high density environments. With dual-band MU-MIMO technology and XTRA Range beamforming, it delivers up to 3Gbps wireless throughput and supports 256 concurrent clients. Its embedded controller, PoE/PoE+ support, and compatibility with GWN.Cloud and GWN Manager make deployment and management effortless. Ideal for voice-over-Wi-Fi and real-time applications, this sleek indoor AP combines enterprise-grade performance with simplified scalability..Dual-band indoor use with enterprise-grade access point performance..AX standard and 3000Mbps (3Gbps) wireless data transfer rate..PoE/PoE+ operation and supports Wi-Fi 6 protocol for modern networks..802.11 a/b/g/n/ac/ax wireless connectivity for broad compatibility..1G Ethernet port, reset pinhole, and Kensington lock interface..Mounting kits and a quick start guide for streamlined setup..Power via Ethernet using 802.3af/802.3at PoE standards..2.4GHz and 5GHz frequency bands for extended coverage..Complies with FCC, CE, RCM, and IC certifications for global deployment..1-year manufacturer warranty.

The Grandstream GWN7670 is a next-generation enterprise-grade Wi-Fi 7 access point designed for high-density environments and seamless connectivity. Featuring dual-band 2x2:2 MIMO with advanced technologies like DL/UL OFDMA, Multi-RU, and Preamble Puncturing, it delivers up to 3.6Gbps wireless and 5Gbps wired throughput. With support for 4096 QAM and Multi-Link Operation (MLO), it maximizes spectrum efficiency and minimizes interference. Ideal for voice-over-Wi-Fi and real-time applications, the GWN7670 supports 256 concurrent clients, advanced QoS, BLE 5.3, and up to 175 meters of coverage. It includes two 2.5G Ethernet ports with PoE+ and integrates a controller for managing up to 50 APs locally, while also supporting Grandstream’s GDMS cloud and GWN Manager platforms..Designed for dual-band Wi-Fi 7 access with up to 256 concurrent client connections..Delivers 3.6Gbps wireless and 5Gbps wired throughput using 4096 QAM and MLO technology..Supports PoE+ power and complies with the latest WiFi 7 standard for high-speed networking..802.11 a/b/g/n/ac/ax/be wireless protocols for seamless connectivity..Equipped with 2×2.5G Ethernet ports, reset pinhole, and Kensington lock interface..Packaged with mounting kits, quick start guide, and anti-trip power cord..Powered via PoE/PoE+ with self-adaptive power detection for efficient operation..2.4GHz and 5GHz bands with advanced channel bandwidth support..Certified by FCC, CE, RCM, IC for global compliance and safety assurance..3-year manufacturer warranty for long-term reliability.

This affordable Wi-Fi 6 access points provides high‑performance connectivity for any organization experiencing growing numbers of mobile, IoT and mobility requirements. With a maximum real-world aggregate data rate of 1.49 Gbps (HE80/HE20), Aruba 504 delivers the speed and reliability needed for venues and workplaces such as schools, midsize offices and retailers. Aruba 504 AP is also designed to optimize user experience by maximizing Wi-Fi efficiency and dramatically reducing airtime contention between clients. Features include Orthogonal frequency-division multiple access (OFDMA), and cellular optimization. With up to 2 spatial streams (2SS) and 80MHz channel bandwidth (HE80), the Aruba 504 provides groundbreaking wireless capabilities for budget-conscious deployments..Access points provide high-performance connectivity for any organization experiencing growing numbers of mobile, IoT and mobility requirements.1.49Gbps maximum real-world speed (HE80/HE20).Features Ethernet port with auto-sensing link speed (10/100/1000BASE-T) and PoE-PD support and USB 2.0 host interface with Type-A connector capable of sourcing up to 1A/5W to an attached device.Supports direct DC power (12VDC) and Power-over-Ethernet.Indoor, dual radio, 5GHz and 2.4GHz 802.11ax 2x2 MIMO.Meets or exceeds the FCC/ISED, UL/IEC/EN 60950, EN 60601-1-1, EN60601-1-2, UL2043 standards.Features WPA3 and Enhanced Open security.Built-in technology that resolves sticky client issues for Wi-Fi 6 and Wi-Fi 5 devices.OFDMA for enhanced multi-user efficiency.IoT-ready Bluetooth 5 and Zigbee support

The Aruba Instant On AP25 indoor access point offers ultrahigh-speed performance for high-density small businesses. Perfect for gaming, boutique hotels, tech start-ups, and professional offices. Features of the AP25 include orthogonal frequency-division multiple access (OFDMA), multi-user MIMO and target wake time (TWT). With up to four spatial streams (4SS) and 160MHz channel bandwidth (HE160), the AP25 provides groundbreaking wireless capabilities for businesses looking to boost performance and future-proof their networks..Wireless dual-band (2.4GHz, 5GHz) indoor access point intended for enterprises that need more wireless capacity and/or wider channels.With IEEE 802.11ax standard and data transfer rates up to 2500Mbps, this wireless access point enables efficient network performance.One port with POE-in support.Based on the 802.11ax (Wi-Fi 6) standard.Contains one uplink Gigabit Ethernet port with PoE-in support.Power over Ethernet (POE): 802.3at (Class 4), 12VDC.Dual radio for simultaneous dual-band operation: 5GHz 802.11ax 4 x 4 MIMO for an up to 4.8Gbps wireless data rate with MU-MIMO support (Wi-Fi 6); 2.4GHz 802.11ax 2 x 2 MIMO for an up to 574Mbps wireless data rate (Wi-Fi 6).Meets or exceeds the EN 60601-1-1 and EN 60601-1-2 standards.Instant On technology automatically detects and applies highest (critical) PoE priority to access point for uninterrupted power delivery and wireless network access.HE160 mode delivers higher performance with 160MHz supported clients.Orthogonal frequency-division multiple access (OFDMA) allows the access point to handle multiple Wi-Fi 6 capable clients on each channel simultaneously, regardless of device or traffic type.Target Wake Time technology helps reduce power consumption, extending battery life.Supports MU-MIMO, allowing service to multiple clients (Wi-Fi 5 and Wi-Fi 6) at the same time.1024-Quadrature Amplitude Modulation (1024-QAM) improves throughput to access points and devices.Low-density parity check (LDPC) delivers high-efficiency error correction for increased throughput.Manage everything through the official app on the device of your choice with the Aruba Instant On app.Built-In security gateway/firewall.2-year manufacturer limited warranty

The Aruba Instant On AP25 indoor access point offers ultrahigh-speed performance for high-density small businesses. Perfect for gaming, boutique hotels, tech start-ups, and professional offices. Features of the AP25 include orthogonal frequency-division multiple access (OFDMA), multi-user MIMO and target wake time (TWT). With up to four spatial streams (4SS) and 160MHz channel bandwidth (HE160), the AP25 provides groundbreaking wireless capabilities for businesses looking to boost performance and future-proof their networks..Wireless dual-band (2.4GHz, 5GHz) indoor access point intended for enterprises that need more wireless capacity and/or wider channels.With IEEE 802.11ax standard and data transfer rates up to 2500Mbps, this wireless access point enables efficient network performance.One port with POE-in support.Based on the 802.11ax (Wi-Fi 6) standard.Contains one uplink Gigabit Ethernet port with PoE-in support.Power over Ethernet (POE): 802.3at (Class 4), 12VDC.Dual radio for simultaneous dual-band operation: 5GHz 802.11ax 4 x 4 MIMO for an up to 4.8Gbps wireless data rate with MU-MIMO support (Wi-Fi 6); 2.4GHz 802.11ax 2 x 2 MIMO for an up to 574Mbps wireless data rate (Wi-Fi 6).Meets or exceeds the EN 60601-1-1 and EN 60601-1-2 standards.Instant On technology automatically detects and applies highest (critical) PoE priority to access point for uninterrupted power delivery and wireless network access.HE160 mode delivers higher performance with 160MHz supported clients.Orthogonal frequency-division multiple access (OFDMA) allows the access point to handle multiple Wi-Fi 6 capable clients on each channel simultaneously, regardless of device or traffic type.Target Wake Time technology helps reduce power consumption, extending battery life.Supports MU-MIMO, allowing service to multiple clients (Wi-Fi 5 and Wi-Fi 6) at the same time.1024-Quadrature Amplitude Modulation (1024-QAM) improves throughput to access points and devices.Low-density parity check (LDPC) delivers high-efficiency error correction for increased throughput.Manage everything through the official app on the device of your choice with the Aruba Instant On app.Built-In security gateway/firewall.2-year manufacturer limited warranty

The Grandstream GWN7604 is a compact Wi-Fi 6 access point designed for small businesses, hotels, and home offices. It delivers up to 3Gbps aggregate wireless throughput and supports 256 concurrent clients across dual-band 2.4GHz and 5GHz frequencies. Equipped with four Gigabit Ethernet ports—one uplink with PoE/PoE+ and two with PSE—it enables flexible power and network distribution to connected devices. The GWN7604 features advanced QoS for low-latency applications, secure boot with digital signature protection, and seamless management via Grandstream’s GDMS cloud and GWN Manager platforms. With up to 100 meters of coverage, it’s ideal for scalable, secure wireless deployments..Dual-band coverage, ideal for small offices, hotels, and home networks..Wi-Fi 6 speeds up to 3000Mbps with 3Gbps aggregate wireless throughput..PoE/PoE+ input and WiFi 6 for flexible power and fast wireless performance..802.11 a/b/g/n/ac/ax for broad device compatibility..4 Gigabit Ethernet ports, reset pinhole, and Kensington lock..Packaged with mounting kits and a quick installation guide for easy setup..Powered through PoE or PoE+ with automatic power adaptation..Operates on 2.4GHz and 5GHz bands with MU-MIMO antenna design..Certified by FCC, CE, RCM, IC for global compliance and safety standards..1-year manufacturer warranty.

The Grandstream GWN7670WM is a sleek in-wall Wi-Fi 7 access point designed for next-generation enterprise networks. With dual-band 2×2:2 MIMO and advanced technologies like Multi-RU, 4096 QAM, and MLO, it delivers up to 3.6Gbps wireless throughput and supports 256 concurrent clients. Its stylish, paintable shell blends into any space, while PoE+ support and embedded controller management simplify deployment. Ideal for voice-over-Wi-Fi and high-density environments, this AP ensures seamless performance and secure connectivity..Dual-band in-wall use with enterprise-grade access point capability..BE standard and 3600Mbps wireless data transfer performance..PoE+ and integrates Wi-Fi 7 for ultra-fast, low-latency networking..802.11 a/b/g/n/ac/ax/be wireless connectivity protocols..2.5G Ethernet WAN/LAN port and reset pinhole interface..Mounting kits and a quick start guide for easy setup..Powered via Ethernet using 802.3af/802.3at PoE standards..2.4GHz and 5GHz bands for extended indoor coverage..Certified under FCC, CE, RCM, IC and built for secure enterprise use..1-year manufacturer warranty.

The Juniper AP64 High Performance Multi Gigabit Outdoor Wireless Access Point ensures business continuity and operational efficiency in harsh environments. This high-performance, ruggedized and weather-resistant outdoor Wi-Fi 6E access point integrates AI for AX capabilities to automate network operation and boost Wi-Fi performance while providing real-time network insights..Designed for tri-band operation across 2.4 GHz, 5 GHz, and 6 GHz frequencies, suitable for both indoor and outdoor enterprise deployments..Supports Wi-Fi 6E (802.11ax) with a peak data transfer rate of 3600 Mbps (3.60 Gbps)..Includes Power over Ethernet (PoE) capability and complies with the Wi-Fi 6E standard..Provides wireless connectivity through Wi-Fi 6E and Bluetooth Low Energy (BLE) 5.3..Features a single 2.5 Gigabit Ethernet RJ-45 port for high-speed network access..Comes equipped with internal antennas, GPS/GNSS receiver, temperature sensor, and accelerometer..Operates using PoE as its primary power source, simplifying installation..Utilizes 2.4 GHz, 5 GHz, and 6 GHz bands to deliver optimal wireless performance..Complies with IEEE 802.11 a/b/g/n/ac/ax standards and integrates WIDS/WIPS for enhanced security..Limited 1-Year Manufacturer Warranty

Ubiquiti™ Networks™ NanoStation™ 2.4 GHz Wireless access point is ideal for point-to-multipoint applications and requires CPE devices with a sleek form factor. Bridge has a panel antenna with dual-polarity and requires no tools for assembly..Wireless data transfer rate: 150 Mbps.Frequency: 2.41 - 2.46 GHz ISM.Dimensions: 11.6"(H) x 3.1"(W) x 1.2"(D).Interfaces/ports: Ethernet port, fast ethernet port, 2 x network (RJ-45), PoE (RJ-45) port.Antenna gain: 11 dBi, outdoor antenna range - 9.3 mile, wireless LAN standard - IEEE 802.11n, ISM band.Management: Web based management, airControl.Power supply: PoE.Form factor: Pole mountable.Processor: Atheros MIPS 24KC, 400 MHz.Operating temperature: -30 - 75 deg C, Operating humidity: 5 - 95% condensing.Memory: 32MB SDRAM, 8MB Flash.Features: MIMO technology, quality of service, LED indicator.With software-enabled PoE output, the secondary ethernet port can power an external device, such as a PoE security camera, for seamless IP video integration.TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.Polarization: Dual linear.Includes pole mounting kit.Certifications and standards: ETSI300-019-1.4, FCC Part 15.247, IC RS210, CE, IEEE standards - 802.11 b/g/n/802.3af.Weight: 14.11 oz..Warranty: 1 year limited.Ubiquiti™ Networks™ NanoStation™ 2.4 GHz Wireless access point has CPE design that expanded the global wireless ISP industry and offers transfer rate up to 150 Mbps.

The Cisco Catalyst 9120AX series access points are resilient, secure, and intelligent. We are more dependent on our wireless networks than ever before. Additional devices connect to the network every year, and the Cisco Catalyst 9120AX series access points will provide a seamless experience anywhere for everyone. Going beyond the Wi-Fi 6 (802.11ax) standard, the 9120AX series provides integrated security, resiliency, and operational flexibility as well as increased network intelligence. Extending Cisco's intent-based network and perfect for networks of all sizes, the Cisco Catalyst 9120AX series scales to the growing demands of IoT while fully supporting the latest innovations and new technologies. Not only that, but the 9120AX series is a leader in performance, security, and analytics. The Cisco Catalyst 9120AX series access points, paired with Cisco DNA, are enterprise-class products that will address your current and future needs. These access points are the first step in updating your network so that you can take better advantage of all of the features and benefits that Wi-Fi 6 provides..Wireless dual-band (2.4GHz, 5GHz) indoor access point intended for enterprises that need more wireless capacity and/or wider channels.AX dual-band access point.One port with PoE support.Wi-Fi 6 certification supports all mandatory 802.11ax features that include MIMO, OFDMA, TWT, and more.Contains a two 2.5 Gigabit Ethernet uplink port with PoE-in support (802.3at), USB 2.0 @ 4.5W host interface, Auto-MDIX, and management console port (RJ-45).Power over Ethernet (PoE): 802.3at.Dual radio for simultaneous dual-band operation (5GHz and 2.4GHz, 802.11ax, 4 x 4 MIMO).Meets or exceeds the UL2043,EN 55032 (rev. 2015), EN 301 489-17 (v3.1.1 2017-02), UL 60950-1, and EN 301 893 (v2.1.1) standards.Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors.Compact multi-RF connector with DART interface.Cisco Catalyst 9120AXE access points are certified for use with antenna gains up to 6dBi (2.4GHz and 5GHz).Safeguard sensitive data with WPA2/WPA3 and Enhanced Open.Cisco DNA software support.Lifetime manufacturer limited warranty

Elevate your outdoor connectivity with the Grandstream GWN7660ELR, a high-performance AX3000 Wi-Fi 6 access point designed for enterprise-grade reliability. Engineered with IP67-rated weatherproof casing and heat-resistant technology, it thrives in harsh environments while delivering seamless coverage up to 300 meters. Featuring dual-band 2×2:2 MIMO with OFDMA and advanced antenna design, it supports up to 256 concurrent clients with blazing-fast 3Gbps aggregate wireless throughput. Integrated PoE/PoE+ support and a 2.5Gbps SFP port ensure flexible deployment, while the embedded controller and compatibility with GWN.Cloud and GWN Manager simplify network management. Ideal for warehouses, schools, hospitals, and multi-floor offices, this access point combines rugged durability with cutting-edge performance..Dual-band outdoor use with enterprise-grade access point functionality..AX wireless standard and up to 3000Mbps (3Gbps) data transfer rate..802.11 a/b/g/n/ac/ax wireless connectivity standards..1G RJ45 and 2.5G SFP ports plus a reset button interface..Mounting kits and a quick installation guide for easy setup..Powered via Ethernet using 802.3af/802.3at PoE standards..2.4GHz and 5GHz frequency bands for broad coverage..Meets FCC, CE, RCM, IC certifications and IP67 weatherproof standards..1-year manufacturer warranty.

The Grandstream GWN7664E is a high-performance AX6000 Wi-Fi 6 access point built for enterprise-grade indoor deployments. With dual-band 4×4:4 MU-MIMO and OFDMA technology, it delivers up to 6Gbps wireless throughput and supports 512 concurrent clients. Featuring dual 2.5G Ethernet ports, PoE+ support, and embedded controller management, the GWN7664E ensures seamless connectivity and advanced QoS for real-time applications in medium-to-large business environments..Dual-band indoor use with enterprise-grade access point performance..AX6000 standard and 6000Mbps wireless data transfer capability..PoE+ and integrates Wi-Fi 6 for high-speed network efficiency..802.11 a/b/g/n/ac/ax wireless connectivity protocols..2x 2.5G Ethernet ports, reset pinhole, and Kensington lock..Mounting kits and a quick start guide for easy installation..Powered via Ethernet using 802.3at PoE standards..2.4GHz and 5GHz bands for extended indoor coverage..Certified under FCC, CE, RCM, IC for global deployment..1-year manufacturer warranty.