Toggle Switch Lockout
4 resultsAccuform Signs® STOPOUT® Toggle switch lockout is semi-permanent and has the top half that can be removed and stored when not in use. Unit maintains visibility of the switch position and doesn't disrupt existing decals, markings or messages..Size: 3 1/2"(L) x 1 3/4"(W) x 1 1/2"(H).Includes 3 1/2" x 1 1/2" base, which covers up to 3/4" x 1" switch area.Polycarboante.Top half can be removed and stored when not in use.It's made out of clear polycarbonate, allowing the device to be fixed onto a switch without distrupting any decals or marking.It can be use on toggles, buttons, or knobs as long as it fits.It's easy and quick to install.Benefits: Quick and easy to install, does not disrupt existing messages, partial permanent, multiple uses, familiar shape.Attach self adhesive base over any toggle, switch, or knob that fits.Warranty: 30 days limited.Toggle-Switch Lockout.Clear polycarbonate maintains visibility of the switch position, and doesn't disrupt existing decals, markings, or messages.Includes clear, industrial strength 3M™ VHB™ tape for secure adhesion*.* For best adhesion, ideal bond time is 24 to 72 hours prior to lockout application.Accuform Signs® STOPOUT® Toggle switch lockout is made out of two clear polycarbonate parts with clear 3M VHB tape on the bottom half for adhesion and prevents access to buttons or knobs.
Accuform Signs® STOPOUT® Universal blockout wall switch lockout helps to reduce errors by installing the direction of the required on/off positions. Lockout encloses the entire switch in the desired position by using the existing switch plate screws..Fold down the door which is supported by a living hinge to block access to the screws and lock out access, thus preventing removal of the device.Warranty: 30 days limited.Size: 4 1/2"(H) x 1 5/8"(W) x 7/8"(L).Dual use lockout device works on both rocker/toggle and flat paddle switches.Prevent accidental switch of the circuit.Uniquely designed to remove the opportunity for error by only allowing the device to be applied in the direction of the desired lock out position - on or off.Universal Blockout Wall Switch Lockout.Using the existing switch plate screws to attach, the lockout device fully encloses the entire switch in the desired position.Bright red plastic lockout calls attention to the lockout situation.Accuform Signs® STOPOUT® Universal blockout wall switch lockout combines with padlock to protect against switch operation during repair and works on rocker/toggle or flat paddle switches.
Master Lock® Safety Series™ Universal wall switch lockout in red color is made of durable plastic material. Lockout device will accept locks with 5/16" Dia shackle clearance and locks out both toggle and decora switches..Shackle size: 5/16"(Dia).Material: Plastic.Size: 4 3/4"(H) x 1 3/4"(W) x 1"(D).Number of locking holes: 1.Locks out both toggle and Decora™.Hinges open for unobstructed normal operations of switch.Patented design assures switch stays locked on or off.Includes English/Spanish, and English/French labels.Used with: Toggle and decora Switches.Standards: OSHA 1910.147.Universal wall switch cover has patent pending design assures switch is locked on or off.
Master Lock® Grip Tight™ 1 1/4" x 1 1/4" x 3 1/2" Circuit breaker lockout in red color is made of corrosion resistance steel material. Lockout device will accept locks with 9/32" Dia shackle clearance found on hi-voltage/amperage breakers..Red.Shackle size: 9/32"(Dia).Material: Steel.Size: 1 1/4"(H) x 1 1/4"(W) x 3 1/2"(L).Number of padlocks: 1.Fits: Wide or tall breaker toggles typically found on hi-voltage/hi-amperage breakers.Adjust to breaker with simple thumb turn and then close clamping handle for a tight grip on the toggle.Great strength with univeral fit, Compact device is easy to carry and easy to store.Accepts all American Lock and Master Lock safety padlock shackles and lockout hasp diameters.Innovative patented Grip Tight™ design effectively locks out circuit breakers.Durable construction with powder coated steel and reinforced polymer for operation in harsh environments.Secure and simple mounting for a solid lockout.For use with: Tall breaker toggle.Standards: OSHA 1910.147.Weight: 0.01 lbs..Circuit breaker lockout has durable construction with powder coated steel and reinforced polymer for operation in harsh environments.
You May Also Like
Accuform Signs® STOPOUT® 120/240 Red double pole circuit breaker lockout accommodates up to 0.28" dia padlock shackles. Lockout has octagon peg that allows tab tags to be secured directly on to the device..Size: 3.33"(L) x 1.75"(W) x 1.5"(D).Includes bar clamp and changeable lockout tag.For double pole 120/240 circuit breaker.Unit uses metal jaws for optimum secure grip.Circuit breaker lockout is a visible safety red to call attention to the locked out switch.Fast secure application, quick release tab.Easily apply with just one hand if needed.Octagon peg allows specially designed tab tags (sold separately) to be secured directly to the device.Unique design allows for fastest lockout application time and quick and easy removal as well.Slide onto breaker bar, pump handle to grip, close handle, secure with padlock (sold separately).Warranty: 30 days limited.120/240 Circuit Breaker Lockout.Fast, secure application and quick-release tab.The unit uses two metal jaws for optimum secure grip.Accommodates up to 9/32" diameter padlock shackles.Fits double pole circuit breaker switches.⚠ WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.Accuform Signs® STOPOUT® 120/240 Red double pole circuit breaker lockout uses metal jaws for optimum secure grip and has unique design that supports fast lock application time.
Accuform Signs® STOPOUT® Red double pole circuit breaker lockout with unique design supports fastest lockout application time with easy removal. Lockout with bar clamp design simply slide onto breaker switch and lock securely by closing the handle..Size: 3.33"(L) x 0.9375"(W) x 1.5"(D).Includes bar clamp and changeable lockout tag.For single pole 120/240 circuit breaker.Unit uses metal jaws for optimum secure grip.Circuit breaker lockout is a visible safety red to call attention to the locked out switch.Fast secure application, quick release tab.Easily apply with just one hand if needed.Octagon peg allows specially designed tab tags (sold separately) to be secured directly to the device.Features a bar clamp design, allowing the lockout to simply slide onto a breaker switch and lock securely into place by closing the handle down.Unique design allows for fastest lockout application time and quick and easy removal as well.Device does not rely on a traditional screw mechanism to secure.Lift open the handle, slide onto the breaker bar, close the hand down and secure with a padlock (sold separately).Warranty: 30 days limited.120/240 Circuit Breaker Lockout.Fast, secure application and quick-release tab.The unit uses two metal jaws for optimum secure grip.Accommodates up to 9/32" diameter padlock shackles.Fits single pole circuit breaker switches.⚠ WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.Accuform Signs® STOPOUT® Red double pole circuit breaker lockout fits 120/240 V breaker switches and combines with padlock to keep circuit breakers in off position during maintenance.
Accuform Signs® STOPOUT® StopPlug™ Multi plug lockout has hinge-style design that encloses the plug and lines up the lock hole tabs. Lockout fits most 110, 220, 550 or 600V AC plugs with dimensions of 6" x 3" x 3" using 1" dia cord..Size: 6"(L) x 3"(W) x 3"(H).AC plug lockout.Prevents unauthorized, accidental plug-in of a power cord leading to equipment and machinery.Simply insert the electrical cord through the side opening of StopPlug™ and lock it out.Write on 'Danger' label on the outside provides additional warning and identifies the responsible person.Case is universal "stop" octagon shape in safety red.All plastic construction is dielectric and RoHS compliant and resists temperature variations.Fits most 110, 220, 550, or 600 VAC plugs up to 2 1/2" x 2 1/2" x 5 1/2" with cord up to 1"(Dia.).StopPlug™ plug Lockouts feature inside pry-guards uniquely designed to prevent plug access and tampering.Warranty: 30 days limited.Multi-Plug Lockout.Thick-wall, tamper-resistant, hinge-style design completely encloses the plug and lines up lockhole tabs.To lock out, secure with padlock and lockout tag (both sold separately) to render the plug unusable.Accuform Signs® STOPOUT® StopPlug™ Multi plug lockout combines with a padlock to protect against plug connection during maintenance and has hollow shell that surrounds an electrical plug.
Accuform Signs® STOPOUT® 120/240 Red triple pole circuit breaker lockout accommodates up to 0.28" dia padlock shackles. Lockout has octagon peg that allows tab tags to be secured directly on to the device..Size: 3.33"(L) x 2.5"(W) x 1.5"(D).Includes bar clamp and changeable lockout tag.Circuit breaker lockout is a visible safety red to call attention to the locked out switch.Easily apply with just one hand if needed.Octagon peg allows specially designed tab tags (sold separately) to be secured directly to the device.Unique design allows for fastest lockout application time and quick and easy removal as well.Slide onto breaker bar, pump handle to grip, close handle, secure with padlock (sold separately).Warranty: 30 days limited.120/240 Circuit Breaker Lockout.Fast, secure application and quick-release tab.The unit uses two metal jaws for optimum secure grip.Accommodates up to 9/32" diameter padlock shackles.Fits triple pole circuit breaker switches.⚠ WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.Accuform Signs® STOPOUT® 120/240 Red triple pole circuit breaker lockout uses metal jaws for optimum secure grip and has unique design that supports fast lock application time.
Accuform Signs® Stopout® Standard lockout scissor hasp with a 1 1/2" dia opening accommodates up to 6 pad locks. Hasp in red color allows multiple people to lockout the equipment for safety..Vinyl coated on zinc plated steel.Allows multiple people to lockout equipment for added safety.Accommodates up to 6 padlocks.Warranty: 30 days limited.Standard Scissor Hasp.1½" Diameter Opening x 5" Length.⚠ WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.Accuform Signs® Standard lockout scissor with 1 1/2" dia opening accommodates up to 6 padlocks and features zinc-plated steel on a vinyl-coating.
Accuform Signs® Stopout® Standard lockout scissor hasp with a 1" dia opening accommodates up to 6 pad locks. Hasp in red color allows multiple people to lockout the equipment for safety..Size: 5"(L) x 1"(Dia).1" Diameter Opening x 4½" Length.Vinyl coated on zinc plated steel.Warranty: 30 days limited.Standard Scissor Hasp.Allows multiple people to lockout equipment for added safety.Sign size: 1".Accommodates up to 6 padlocks (sold separately).⚠ WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.Accuform Signs® Standard lockout scissor with 1" dia opening accommodates up to 6 padlocks and features zinc-plated steel on a vinyl-coating.
Accuform Signs® STOPOUT® Cinch lockout has simple intuitive design and features nylon-coated steel cable to resists corrosion. Cinch lockout has 6' long cable that provides the flexibility to lock out large or odd-shaped targets with one device..Cinch Cable Lockout.Durable Plastic.3 1/3" x 4" x 1".EA.Unique, compact internal spooling feature—no fussing with loose, long cable cords.Lockout multiple devices quickly, neatly, and easily.Simply extend and loop the 6-ft nylon-coated steel cable through several devices to lock them out; then insert the cable end back into the device to cinch tight.When cable is cinched tight, device can then be secured with a padlock (sold separately).Red/black.Size: 3 1/3"(L) z 4"(W).Plastic.Includes 6' cable.Lockout contains internal cable spooling feature to quickly, simply and neatly extend and loop the 6' nylon coated, steel cable through several devices to lock them out.Insert the cable end back into cinch lock device for it to "cinch" tight and unmovable.Red hole cable feeder has a funnel shape for quick and obvious placement of the cable.Unique, compact internal spooling feature.No fussing with loose, long cable cords.Simple, intuitive design features.Accuform Signs® STOPOUT® Cinch lockout with 6' cable is used to quickly lockout multiple devices and provides unique compact internal spooling feature.
Accuform Signs® STOPOUT® Twist 'n lock cable and cinch lockout hasp is turned to 15 deg the hasp halves tightens down and holds the cable in place. Hasp made of polycarbonate comprises 2 rotating halves with 6' red plastic-coated steel cable..Twist 'n Lock Cinch Lockout Hasp.Polycarbonate.4" x 4" x 3".EA.Compact hasp comprised of two rotating halves with 6-ft red plastic-coated steel cable.To use, insert the cable through the devices to lock out; then pull the cable taut.A short 15° turn of the hasp halves tightens down and cinches the cable in place.Pin pops up to hold device in the secured position and lines up the 4 padlock holes.Secure with up to 4 padlocks (sold separately).When the lockout situation is finished, simply remove padlock(s), push in the pin, twist the device in the opposite direction to release, and pull out the cable.Red.Size: 3"(W) x 1 1/2"(Dia).Includes 6' red plastic-coated steel cable.Run the cable through various devices and with a quick twist of the hasp, cinch the cable to prevent unauthorized access.Easy to use cable and cinch lockout hasp solution.Compact hasp comprised of two 1 1/2" dia. x 3"W rotating halves with 6' red plastic-coated steel cable.Visible red octagon shape reinforces the lockout situation.To use, insert the cable through the devices to lock out, then pull the cable taut.Short 15 deg turn of the hasp halves tightens down and cinches the cable in place.Accuform Signs® STOPOUT® Twist 'n lock cable and cinch lockout hasp is octagonal in shape that reinforces the lockout situation and prevents unauthorized access.
Accuform Signs® STOPOUT® Gate valve lockout for 5" - 6 1/2" valve handle has a unique pry guard that avoids the ability to insert a screwdriver in between the halves to pry them apart. Lockout comes with safety label and red diagonal hazard stripes..Legend: DANGER LOCKED OUT.Fit 5" - 6 1/2" valve handle diameter.Prevent gate valve handles from being turned without authority.Gate valve lockout's hinged clamshell housing fully encloses the valve handle and prevents unauthorized access.Tough plastic is a bright hazard red color and features three shackle holes for securing with padlocks in a group lockout setting.Unique pry-guard, prevents the ability to insert a screwdriver in between the halves to pry them apart.In the center, a thinner area allows for easy drill through and attachment on rising stem gate valves.Comes with eye catching safety label with red diagonal hazard stripes and space to write in pertinent lockout information.Hollow circular shell surrounds a gate valve handle and combines with a padlock to help protect against valve opening during maintenance and repair.Features 3 shackle holes for securing with padlocks (sold separately).Rigid hinge/pin design stands up to repeated use, opens easily and closes securely.Warranty: 30 days limited.Thermoplastic polypropylene with aluminum hinge/pin.Accuform Signs® STOPOUT® Red gate valve lockout for 5" - 6 1/2" valve handle features three shackle holes for securing with padlocks and prevents unauthorized access.
Accuform Signs® STOPOUT® StopPlug™ 110 VAC Plug lockout has hinge-style design that encloses the plug and lines up the lock hole tabs. Lockout fits most 110, 220, 550 or 600 VAC plugs with dimensions of 3 1/2" x 2 1/4" x 2 1/4" using 1" dia cord..Size: 3 1/2"(L) x 2 1/4"(W) x 2 1/4"(H).AC plug lockout.Prevents unauthorized, accidental plug-in of a power cord leading to equipment and machinery.Simply insert the electrical cord through the side opening of StopPlug™ and lock it out.Thick wall, tamper resistant, hinge style design completely encloses the plug and l ines up lockhole tabs, to lockout secure with padlock and lockout tag to render the plug unusable.Write on 'Danger' label on the outside provides additional warning and identifies the responsible person.Case is universal "stop" octagon shape in safety red.All plastic construction is dielectric and RoHS compliant and resists temperature variations.Fits most 110 VAC plugs up to 1 1/4"(H) x 1 1/4"(W) x 2"(L) with cord up to 1/2"(Dia.).StopPlug™ plug Lockouts feature inside pry-guards uniquely designed to prevent plug access and tampering.Warranty: 30 days limited.110 VAC Plug Lockout.To lock out, secure with padlock and lockout tag (both sold separately) to render the plug unusable.⚠ WARNING: Cancer www.P65Warnings.ca.gov.Accuform Signs® STOPOUT® StopPlug™ 110 VAC Plug lockout combines with a padlock to protect against plug connection during maintenance and has hollow shell that surrounds an electrical plug.
Identify hazards before they become an issue with these easy to deploy visual cues..Dimensions: 20"(H) x 12"(W).1 sign per pack.Legend: DANGER LOCKED OUT DO NOT OPERATE (text and symbol).Material: Rugged plastic.Language: English.Self-supporting, free-standing signs are constructed of 1/8" high-impact material.Sign has handle cut-out for ease of carrying and fold flat for transport and storage.Both sides have the same message.Ideal for multiple use and rough handling.Allow to identify temporary hazardous conditions or display important messages, quickly and easily.⚠ WARNING: Cancer www.P65Warnings.ca.gov
Accuform Signs® Lockout center board with kit is designed for tough environment and has board with aluminum pronged hooks to hang padlocks/hasps. Board includes 6 steel padlocks, 0.75" shackle, 10 HS laminate lockout tags and 10 - plastic ties..Size: 14"(L) x 14"(W) x 2"(H).Plastic ties, steel padlocks.Board has holes for wall mounting.A thick molded, clear poly pocket measures 4.75"(H) x 3.625"(W) x 2"(D) to hold lockout tags.Designed for tough environments.Includes 6 steel padlocks, 10 Laminated plastic tags - locked out do not operate, 10 plastic ties, 1 standard style scissor hasp, 1" opening, 1 standard style scissor hasp, 1.5" opening.Warranty: 30 days limited.Lockout Center Board Kit, 6-Padlock..040" thick Aluminum.Durable .040" aluminum board has aluminum pronged hooks to hang padlocks and lockout hasps.Kit includes: 6 - Steel Padlocks (keyed differently), 3/4" shackle; 10 - HS-Laminate Lockout Tags; 10 - Plastic Ties; 1 - Standard Scissor Hasp, 1" opening; 1 - Standard Scissor Hasp, 1½" opening.⚠ WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.Accuform Signs® Lockout center board with kit and 6-padlock has clear poly pockets for holding tags and is designed so that your padlocks, tags and lockout devices are easily available.
Accuform Signs® STOPOUT® Push button lockout with 22.5 mm base is made of tough polycarbonate and aluminum that makes it tamper or impact resistant. Push button has octagon-shaped cover with aluminum metal ring that supports lockout status..Size: 2 1/8"(L) x 2 1/8"(W) x 2 1/4"(H).Includes: 22.5 mm base and steel hinge pin.Steel hinge, polycarbonate clamshell, aluminum base.Device contains one semi permanent aluminum metal ring which is placed underneath the threaded ring nut and a clear polycarbonate top that has a lip on the bottom, making it easy to slip under the rim of the metal ring for a secure fit.Clear polycarbonate top can easily be removed and stored for later use.Push button lockout is useful for locking out access with a padlock, or installing without a padlock to prevent accidental activation of a button while still providing easy access.Push button lockout can be secured using a plastic seal for restrictive access that discourages tampering yet anyone can cut to access when needed.Octagonal shape helps convey the lockout status visually.Push button lockouts industrial polycarbonate clamshell, steel hinge pin and aluminum base helps it withstand rigorous facility use.Push button lockouts survive impacts that "unhinge" other devices.Semi removable design allows for easy storage.Clear top allows user to see push button, tough polycarbonate and aluminum makes it tamper, impact-resistant and extremely durable.Octagon shaped cover and aluminum metal ring reinforces lockout status.Warranty: 30 days limited.Polycarbonate and aluminum.2-part device consists of semi-permanent aluminum base and clear polycarbonate top that can be removed and stored for later use.Tough polycarbonate and aluminum makes it tamper, impact resistant, and extremely durable!.Restrict access with plastic seal or padlock (sold separately), or can be used without padlock to prevent accidental activation of a button while still providing access.⚠ WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.Accuform Signs® STOPOUT® Push button lockout with 22.5 mm base restricts access with plastic seal or padlock and has semi-removable design that allows for easy storage.
Accuform Signs® "DANGER..LOCKED OUT" RP-Plastic lockout tag uses warning text to prevent machine operation/power activation. Tag measuring 5 3/4" x 3 1/4" includes 3/8" dia hole for quick and easy fastening, sold as 25 per pack..Size: 5 3/4"(L) x 3 1/4"(W).15-mil rigid RP-plastic.Legend: "DANGER DO NOT OPERATE EQUIPMENT LOCKED OUT".Package: 25/pack.Sign language: English.High-strength plastic tags are water resistant to withstand weather conditions.Tear-resistant, weather-resistant and chemical resistant for dirty and greasy environments.Relatively bendable.Top has 3/8" hole reinforced with metal grommet to prevent pull off.Writable surface is abrasion resistant.Rigid plastic is flexible, yet will not readily break down over a wide temperature range.Ideal for indoor and outdoor temporary tagging applications.Flexible, yet durable - withstands stretching and ripping.Warranty: 30 days limited.Safety Tag.High-strength rigid plastic tags suitable for use in tough industrial environments.Mar-resistant, matte surface is easy to write on with pen or marker.Complies with OSHA 29 CFR 1910.147 requirements.⚠ WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.Accuform Signs® "DANGER..LOCKED OUT" RP-Plastic lockout tag in red/black on white color has red/black marking color for high visibility and blank lined areas for specific writing, sold as 25 per pack.
Accuform Signs® STOPOUT® Lockout for 3/8" - 1 1/4" ball valves is made of plastic that resists solvents, cracking, abrasion and extreme temperatures. Lockout has 2 wingspan halves that are hinge to quickly secure any closed ball valve handle..Size: 3 1/8" x 4 1/2" x 4 1/2".Max. number of padlocks: 1.Padlock shackle max. diameter: 5/16".To fit 3/8" - 1 1/4" ball valve.Unique and easy to use lockout has two wingspan halves that hinge to quickly and simply secure over any closed ball valve handle.Device is secured with a padlock (sold separately) that is positioned so that the tag is always on top and visible.Bright red, plastic device works with ball valve handles either perpendicular or parallel to the pipe.Durable plastic resists solvents, cracking, abrasion and extreme temperatures.Stop valves from being turned by applying this unique gull wing design ball valve lockout.For use with ball valve, designed for locking out quarter turn ball valves with flat "dog-leg" handles.Temperature range: 0 - 250 deg F.Warranty: 30 days limited.Works with ball valve handles either perpendicular or parallel to the pipe.Includes "DANGER LOCKED OUT" label with space to write in pertinent lockout information.Accuform Signs® STOPOUT® Lockout for 3/8" - 1 1/4" ball valves is positioned so that the tag is always visible on the top and lets device to be secure with a padlock.
Accuform Signs® 42" x 13.25" Lockout kit has red/black "DANGER DO.." text on a highly visible white background. Kit has an accident prevention tag for providing additional visual deterrents..Ladder Shield™ Kit.DANGER DO NOT CLIMB ON LADDER/PELIGRO NO TREPE LA ESCALERA..063" thick Aluminum.42" x 13 1/4" x 2 13/16".EA.Original Lock-On design is made of durable, rust-proof .063" aluminum, and fits most ladders.Secure by using a cable-hasp lockout and padlock (both included).A bold, bilingual warning message and accident prevention tag (included) provide additional visual deterrents.Kit includes: 1 - Ladder Shield™, 1 - Cable-Hasp Lockout, 1 - Padlock with key, 5 - Accident Prevention Tags.Red/black on white.Size: 42"(L) x13.25"(W) x 2.8125"(D).0.063" aluminum for durable, rust-proof.Legend: "DANGER DO NOT CLIMB ON LADDER (ENGLISH) NO TREPE LA ESCALERA (SPANISH)".Package: Each.Sign language: English & Spanish.Attach to fixed ladders on buildings or semi permanent ladders at job sites to discourage unauthorized climbing.Bold, bilingual warning message and accident prevention tag provide additional visual deterrents.Hang the U-shaped top over an upper level ladder step, blocking access to the steps below.⚠ WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.Accuform Signs® Ladder Shield™ 42" x 13.25" Aluminum "DANGER DO.." lockout kit is designed to prevent unauthorized climbing and is made of durable, rust proof 0.063" aluminum material.