40G Fiber Optic Cable

StarTech Multimode LC/UPC to LC/UPC OM4 fiber optic cable enables 40/100G network connections. The push-pull tabs on each connector ensure quick connection and removal, facilitating accurate installation in high connection density environments. The bend-insensitive fiber and molded strain reliefs support cable runs requiring micro/macro bends while maintaining low attenuation. The retractable strain-relief housings enable toolless in-field polarity swapping. Color-coded LC-Duplex connectors ensure error-free polarity configuration..Multimode OM4 fiber optic cable enables 40/100G network connections.Cable length is 26.2'.Contains two fiber optic LC duplex connectors.Made of polypropylene in aqua with straight white connectors.Supports 10/40/100G networks; backward compatible with OM3.Can be uses in 40/100 Gigabit Ethernet and fiber architecture.High micro-bending resistance facilitates tight bends in intricate environments, perfect for fiber switches/servers, SANs, and SFP+/QSFP+/QSFP28 modules.Push-pull tab design provides easy access for precise insertion/removal in high-density installations.Retractable connector housings for toolless polarity swapping.LC/LC-UPC ends for improved return loss over PC polish.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend.Safe for enclosed/poorly ventilated spaces.Great for 850nm and 1300nm Vertical-Cavity Surface-Emitting Laser (VCSEL) and LED sources.Color-coded LC-Duplex connectors ensure error-free polarity configuration.Lifetime manufacturer limited warranty

StarTech Multimode LC/UPC to LC/UPC OM4 fiber optic cable enables 40/100G network connections. The push-pull tabs on each connector ensure quick connection and removal, facilitating accurate installation in high connection density environments. The bend-insensitive fiber and molded strain reliefs support cable runs requiring micro/macro bends while maintaining low attenuation. The retractable strain-relief housings enable toolless in-field polarity swapping. Color-coded LC-Duplex connectors ensure error-free polarity configuration..Multimode OM4 fiber optic cable enables 40/100G network connections.Cable length is 13.1'.Contains two fiber optic LC duplex connectors.Made of polypropylene in aqua with straight white connectors.Supports 10/40/100G networks; backward compatible with OM3.Can be uses in 40/100 Gigabit Ethernet and fiber architecture.High micro-bending resistance facilitates tight bends in intricate environments, perfect for fiber switches/servers, SANs, and SFP+/QSFP+/QSFP28 modules.Push-pull tab design provides easy access for precise insertion/removal in high-density installations.Retractable connector housings for toolless polarity swapping.LC/LC-UPC ends for improved return loss over PC polish.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend.Safe for enclosed/poorly ventilated spaces.Great for 850nm and 1300nm Vertical-Cavity Surface-Emitting Laser (VCSEL) and LED sources.Color-coded LC-Duplex connectors ensure error-free polarity configuration.Lifetime manufacturer limited warranty

Connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. This fiber optic cable lets you connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. The OM4 cable supports Vertical Cavity Surface Emitting Laser (VCSEL) and LED light sources and is backward compatible with your existing 50/125 equipment. This Aqua OM4 duplex multimode fiber cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire. It's ideal for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration. Each OM4 fiber cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability. The 450FBLCLC1 from StarTech.com is backed by a lifetime warranty..OM4 (50/125) 3500MHz multimode fiber.Backward compatible with your existing 50/125 equipment.Laser-optimized multimode fiber (LOMMF)

StarTech Multimode LC/UPC to LC/UPC OM4 fiber optic cable enables 40/100G network connections. The push-pull tabs on each connector ensure quick connection and removal, facilitating accurate installation in high connection density environments. The bend-insensitive fiber and molded strain reliefs support cable runs requiring micro/macro bends while maintaining low attenuation. The retractable strain-relief housings enable toolless in-field polarity swapping. Color-coded LC-Duplex connectors ensure error-free polarity configuration..Multimode OM4 fiber optic cable enables 40/100G network connections.Cable length is 9.8'.Contains two fiber optic LC duplex connectors.Made of polypropylene in aqua with straight white connectors.Supports 10/40/100G networks; backward compatible with OM3.Can be uses in 40/100 Gigabit Ethernet and fiber architecture.High micro-bending resistance facilitates tight bends in intricate environments, perfect for fiber switches/servers, SANs, and SFP+/QSFP+/QSFP28 modules.Push-pull tab design provides easy access for precise insertion/removal in high-density installations.Retractable connector housings for toolless polarity swapping.LC/LC-UPC ends for improved return loss over PC polish.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend.Safe for enclosed/poorly ventilated spaces.Great for 850nm and 1300nm Vertical-Cavity Surface-Emitting Laser (VCSEL) and LED sources.Color-coded LC-Duplex connectors ensure error-free polarity configuration.Lifetime manufacturer limited warranty

OM5 LC to LC multimode duplex fiber optic patch cable by StarTech facilitates connectivity across 40G and 100G networks. It supports SWDM (Shortwave Wavelength Division Multiplexing) across an extended wavelength range of 850-953nm VCSEL, enhancing signal quality and performance capacity over OM4. Precision-manufactured ceramic ferrules ensure correct fiber alignment to prevent connectivity issues and minimize insertion loss. Designed for reliability in high-density network applications, the LC to LC UPC polished fiber ends greatly improves return loss characteristics over older PC polishing techniques. The Laser-Optimized Multi-Mode Fiber (LOMMF) OM5 fiber patch cable is perfect for 850-953nm Vertical-Cavity Surface-Emitting Laser (VCSEL) and 1300 nm LED sources..Enhance the performance capabilities of SWDM applications with this OM5 fiber cable.Cable length: 49.2'.LC/LC-UPC ends for improved return loss over PC polish.Bend insensitive fiber core housed in Aramid-reinforced green jacket for a loaded bend radius of 6cm and 3cm when unloaded.Multimode OM5 fiber cable supports 10/40/100G networks and backward compatible with OM4/OM3.Perfect for fiber switches/servers, SANs, and SFP+/QSFP+/QSFP28 modules.LSZH jacket emits low toxic fumes if combusted and safe for enclosed/poorly ventilated spaces.Attenuation value under 2.4dB/km outperforms industry standards.High micro-bend resistance facilitates tight bends in complex installations.Short Wavelength Division Multiplexing (SWDM) enables extended 850-953nm wavelength support for greater channel isolation, enhancing performance capacity beyond OM4 cables.Zipcord design, color-coded connectors for polarity.Lifetime manufacturer limited warranty

Connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. This fiber optic cable lets you connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. The OM4 cable supports Vertical Cavity Surface Emitting Laser (VCSEL) and LED light sources and is backward compatible with your existing 50/125 equipment. This Aqua OM4 duplex multimode fiber cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire. It's ideal for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration.Each OM4 fiber cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability.The 450FBLCLC3 from StarTech.com is backed by a lifetime warranty..OM4 (50/125) 3500MHz multimode fiber.Backward compatible with your existing 50/125 equipment.Laser-optimized multimode fiber (LOMMF)

Connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. This fiber optic cable lets you connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. The OM4 cable supports Vertical Cavity Surface Emitting Laser (VCSEL) and LED light sources and is backward compatible with your existing 50/125 equipment.This Aqua OM4 duplex multimode fiber cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire. It's ideal for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration.Each OM4 fiber cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability.The 450FBLCLC2 from StarTech.com is backed by a lifetime warranty..OM4 (50/125) 3500MHz multimode fiber.Backward compatible with your existing 50/125 equipment.Laser-optimized multimode fiber (LOMMF).Certifications & Standards: RoHS, WEEE

StarTech OS2 LC to SC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs.Cable length is 6.6'.LC/SC-UPC ends for improved return loss over PC polish.LSZH jacket emits low toxic fumes if combusted.Supports up to 100Gbps data transfer rate.Backward compatible with OS1.Meets or exceeds the WEEE standards.Supports bi-directional (BiDi) transmission over a single fiber.Perfect for space-constrained installations requiring minimal fiber count.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm.Lifetime manufacturer limited warranty

StarTech OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs.Cable length is 32.8'.LC/LC-UPC ends for improved return loss over PC polish.LSZH jacket emits low toxic fumes if combusted.Supports up to 100Gbps data transfer rate.Backward compatible with OS1.Meets or exceeds the WEEE standards.Supports bi-directional (BiDi) transmission over a single fiber.Perfect for space-constrained installations requiring minimal fiber count.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm.Lifetime manufacturer limited warranty

StarTech OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs.Cable length is 16.4'.LC/LC-UPC ends for improved return loss over PC polish.LSZH jacket emits low toxic fumes if combusted.Supports up to 100Gbps data transfer rate.Backward compatible with OS1.Meets or exceeds the WEEE standards.Supports bi-directional (BiDi) transmission over a single fiber.Perfect for space-constrained installations requiring minimal fiber count.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm.Lifetime manufacturer limited warranty

StarTech OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs.Cable length: 3.3'.LC/LC-UPC ends for improved return loss over PC polish.LSZH jacket emits low toxic fumes if combusted.Supports up to 100Gbps data transfer rate.Backward compatible with OS1.Meets or exceeds the WEEE standards.Supports bi-directional (BiDi) transmission over a single fiber.Perfect for space-constrained installations requiring minimal fiber count.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm.Lifetime manufacturer limited warranty

StarTech OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs.Cable length is 6.6'.LC/LC-UPC ends for improved return loss over PC polish.LSZH jacket emits low toxic fumes if combusted.Supports up to 100Gbps data transfer rate.Backward compatible with OS1.Meets or exceeds the WEEE standards.Supports bi-directional (BiDi) transmission over a single fiber.Perfect for space-constrained installations requiring minimal fiber count.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm.Lifetime manufacturer limited warranty

StarTech OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs.Cable length is 9.8'.LC/LC-UPC ends for improved return loss over PC polish.LSZH jacket emits low toxic fumes if combusted.Supports up to 100Gbps data transfer rate.Backward compatible with OS1.Meets or exceeds the WEEE standards.Supports bi-directional (BiDi) transmission over a single fiber.Perfect for space-constrained installations requiring minimal fiber count.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm.Lifetime manufacturer limited warranty

Tripp Lite 50/125 micrometer Duplex multi-mode fiber optic patch cable is 33' long and with two conductors is suitable for high performance patch and fiber data distribution systems. Superior quality construction ensures error-free signal transfer. Cable features LC male IEEE 802.3ae network connector at both the ends for efficient connectivity. Cable allows 40/100Gb serial transmission over extended distances in the 850nm wavelength window. Low-smoke zero-halogen jacket in attractive aqua color limits the amount of toxic smoke emitted from combustion and perfect for poorly ventilated areas. Optic cable is suitable for fiber channel applications..Fiber optic cable is suitable for fiber channel (SAN) applications and is perfect to use with VCSEL and LED laser light sources.A convenient length of 33' for ease of installation.Features 2 x LC male first end and 2 x LC male second end connectors for secure data transmission.Recommended for 40/100-Gig ethernet applications.Utilizes LSZH jacket for optimum installation.Compatible to use with PC.Comes in aqua color for a new look.Contains a core/cladding diameter of 50/125 micron for easy connectivity.Uses fiber optic cable for high-speed data transmission.Renders patch cable used to connect your head-ends, central offices and data centers.Consist of 10 meter ( 33ft ) duplex multimode 50/125 aqua OM4 fiber patch cable, LC/LC connectors for secured connectivity.Meets OM4 rated, TIA LOMMF, IEEE 802.3ae, RoHS compliant standards.Comes with limited lifetime warranty.Tripp Lite 33' Aqua fiber optic patch cable with LC male connectivity designed for 40/100-Gb Ethernet applications. Use with VCSEL and LED laser light sources.

OS2 SC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Enhance the performance capabilities of CWDM applications with this OS2 fiber cable.Cable length: 3.3'.SC/SC-UPC ends for improved return loss over PC polish.Bend insensitive fiber core housed in aramid-reinforced yellow jacket for a loaded bend radius of 10mm.Single Mode OS2 fiber cable is immune to EMI and optimized for 10/40/100G networks.Perfect for connecting between servers/switches and data center equipment.Meets or exceeds the ITU-T G652.D/G657.A1 and IEC60703-2-50 Type B1.3/B6.a1 standards.LSZH jacket emits low toxic fumes if combusted; safe for enclosed/poorly ventilated spaces.Attenuation value under 0.35dB/km outperforms industry standards.Backward compatible with OS1.High micro-bend resistance facilitates tight bends in complex installations.Coarse Wavelength Division Multiplexing (CWDM) enables extended 1260-1625nm wavelength support for greater channel isolation over long distances.Number-labeled connectors to indicate polarity.Enhance the performance capabilities of CWDM applications over an OS2 fiber network

OS2 SC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Enhance the performance capabilities of CWDM applications with this OS2 fiber cable.Cable length: 9.8'.SC/SC-UPC ends for improved return loss over PC polish.Bend insensitive fiber core housed in aramid-reinforced yellow jacket for a loaded bend radius of 10mm.Single Mode OS2 fiber cable is immune to EMI and optimized for 10/40/100G networks.Perfect for connecting between servers/switches and data center equipment.Meets or exceeds the ITU-T G652.D/G657.A1 and IEC60703-2-50 Type B1.3/B6.a1 standards.LSZH jacket emits low toxic fumes if combusted; safe for enclosed/poorly ventilated spaces.Attenuation value under 0.35dB/km outperforms industry standards.Backward compatible with OS1.High micro-bend resistance facilitates tight bends in complex installations.Coarse Wavelength Division Multiplexing (CWDM) enables extended 1260-1625nm wavelength support for greater channel isolation over long distances.Number-labeled connectors to indicate polarity.Enhance the performance capabilities of CWDM applications over an OS2 fiber network