IEC 60320 C19 Connectors

APC AP8760 10' IEC 60320 C19 to IEC 60320 C20 Power Cord, Black.Power cable for powering compatible devices.Male IEC 60320 C19 and female IEC 60320 C20 for efficient charging.10' power cable for easy installation.Can be used with network devices.Comes with a 2-year limited warranty

Tripp Lite 2' IEC-320-C19 to IEC-320-C20 Heavy Duty Power Cord, Black.Black.Molded, heavy-duty power cable.2'.Connector: 1 x power IEC 320 EN 60320 C19 first end to 1 x power IEC 320 EN 60320 C20 second end.Number of connectors: 2.Voltage rating: 250 V

The APC® 12' black power cord provides connection from NEMA L6-20P to IEC 320 C19. It has a input frequency response of 50/60 Hz and input voltage rating of 200 - 240 V. This power cord has an operating environmental temperature range of 0 to 45 deg C and storage temperature range of -25 to 65 deg C..Power cord is suitable for use with various IT equipments.Cable length: 12'.Connections: NEMA L6-20P to IEC 320 C19.Meets CSA and UL standards or certifications.Voltage rating: 200 - 240 VAC.Current rating: 16 A.Comes in black color.Dimensions: 2 1/2"H x 4"W x 11 1/2"D.Environment: 0 to 45 deg C operating, -25 to 65 deg C storage.Relative humidity: 0 to 95 % operating, 0 to 95 % storage.Elevation: 0 to 10000' operating, 0 to 50000' storage.Power rating: 4000 W.Weight: 2.17 lbs..Comes with 2 years warranty

Tripp Lite 4' Power interconnect cable features 1 x IEC 60320 C19 connector on first end and 1 x IEC 60320 C14 connector on second end. Cable has voltage rating ranging from 100 V to 250 VAC and is used in server applications..Black.Molded, heavy-duty power cable.4'.Connector: 1 x IEC 60320 C19 first end to 1 x IEC 60320 C14 second end.Number of connectors: 2.Voltage rating: 100 - 250 V.Current rating: 15 A.Frequency: 50/60 Hz.Cable gauge: 14AWG x 3C SFT.Designed for Tripp Lite auto transfer switch / metered PDU PDUMH20HVAT, Tripp Lite switched PDU PDUMVR30HVNET.Jacket: PVC.Compliant and standards: UL, RoHS.Includes C19 to C14 power cable, 4'.Warranty: Lifetime limited.Tripp Lite 4' Power interconnect cable features 3 x 14 AWG conductors and has current rating of 15 A.

Tripp Lite 6' IEC-320-C19 to IEC-320-C14 Heavy Duty Power Cord, Black.Black.Molded, heavy-duty power cable.6'.Connector: 1 x IEC 60320 C19 first end to 1 x IEC 60320 C14 second end.Number of connectors: 2.Voltage rating: 100 - 250 V.Current rating: 15 A.Frequency: 50/60 Hz.Cable gauge: 14AWG x 3C SFT.Designed for Tripp Lite PDU3XMV6G20, Tripp Lite auto transfer switch / metered PDU PDUMH20HVAT, Tripp Lite metered PDU, Tripp Lite switched PDU PDUMVR30HVNET PDU3XMV6L2220.Jacket: PVC.Compliant and standards: UL, RoHS.Includes C19 to C14 power cable, 6'.Warranty: Lifetime limited

The Tripp Lite P034-008 8' heavy-duty power adapter cord has IEC-320-C19 connector on one end and NEMA 5-15P connector on other end. The 15 A/125 V rated adapter cord has three 14 AWG conductors..Molded, heavy-duty power adapter cord is suitable for server applications that require a higher rated, heavier gauge cable.Cord length: 8'.Three prong guards against shock.Comes in black color and SJTW jacket prolongs cable life.14/3 AWG conductor constructions ensures superior electrical conductivity.Amperage: 15 A, Voltage rating: 125 V.Connector on first end: one IEC 320 EN 60320 C19 female.Connector on second end: one NEMA 5-15P male.Compatible with PC.RoHS Compliant.Comes with lifetime limited warranty

StarTech's power cables are designed by IT professionals. We design our products to meet the technical requirements of a wide variety of applications. The in-house specialists subject our products to multiple rounds of comprehensive testing, designed to emulate real-world operational conditions. Third-party labs test our products to confirm compliance with the latest safety standards. StarTech manufactures standard and heavy-duty power cords, extension cords, medical-grade cords, power splitter cables, and power cords featuring passthrough outlets. These products are produced in various lengths, with a range of connector ends, jacket types, and wire gauges..Connect a server or rackmount equipment to a PDU with a cable that's designed for heavy use.Cable length: 2'.Features IEC 60320 C19 to C20 connectors.Three-conductor power cable made with 100% copper wire with nickel plating and durable PVC outer jacket in black; gauge is 12 AWG.VW-1 fire rated cable with fully-molded connector strain reliefs for durability.Rated to carry 250V at 20A.EC 60320 C19 to C20 power extension cord works with North American PDUs and high-powered devices.Manufactured using UL listed components to meet UL62 and UL817 compliance standards.Extend a power connection to a UPS, power supply/PDU, or high-power device.Temperature chamber tested to ensure reliable performance across a range of environmental conditions.Reduced environmental impact and safe disposal by adhering to the rules, regulations, and directives stipulated by REACH and RoHS.100% copper wiring tested for continuity and conductivity, ensuring maximum performance and reliability.TAA compliant.Lifetime limited manufacturer warranty

Tripp Lite 10' IEC-320-C19 to NEMA L6-20P Heavy Duty Power Cord, Black.Black.Molded, heavy-duty power cable.10'.Connector: 1 x power IEC 320 EN 60320 C19 first end to 1 x power NEMA L6-20 - male second end.Number of connectors: 2.Voltage rating: 250 V

Choose the Cisco CAB-L620P-C19-US power cable for a reliable and secure power connection to your electronic devices. This power cable comes with male Power NEMA L6-20 and female Power IEC 320 EN 60320 C19 ports that let you connect and power your devices. Measuring 14 ft. in length, the power cable enables you to position your equipment conveniently..Power cable for powering compatible devices.Male power NEMA L6-20 and female power IEC 320 EN 60320 C19 for efficient charging.14' power cable for easy installation.The 14' black Cisco CAB-L620P-C19-US Standard Power Cord with a rating of 240 V is suitable for charging Cisco Catalyst 4500 Series switches.

StarTech's power cables are designed by IT professionals. We design our products to meet the technical requirements of a wide variety of applications. The in-house specialists subject our products to multiple rounds of comprehensive testing, designed to emulate real-world operational conditions. Third-party labs test our products to confirm compliance with the latest safety standards. StarTech manufactures standard and heavy-duty power cords, extension cords, medical-grade cords, power splitter cables, and power cords featuring passthrough outlets. These products are produced in various lengths, with a range of connector ends, jacket types, and wire gauges..Connect a server or high-power equipment to a power supply or PDU with this heavy-duty power cord.Cable length: 6'.Features IEC 60320 C14 (male) to IEC 60320 C19 (female) connectors.Three-conductor power cable made with 100% copper wire with nickel plating and durable PVC outer jacket in black; gauge is 14 AWG.VW-1 fire rated cable with fully-molded connector strain reliefs for durability.Rated for 250V at 15A.Heavy-duty power cord IEC C14 works with PDUs and power supplies; IEC C19 connector works with servers, switches, and rackmount appliances.Manufactured using UL listed components to meet UL62 and UL817 compliance standards.Temperature chamber tested to ensure reliable performance across a range of environmental conditions.Reduced environmental impact and safe disposal by adhering to the rules, regulations, and directives stipulated by REACH and RoHS.TAA compliant.Lifetime limited manufacturer warranty

StarTech® 10 ft Heavy Duty 14 AWG Computer Power Cord - NEMA 5-15P to C19.For Computer, Server, Router, Network Switch, PDU.Black.10 ft.Has 3 pin NEMA 5-15P male connector on first end.Has 3 pin IEC 60320 C19 female connector on second end.SJT cable for use with heavy tools, equipment, portable lights and power extensions.Number of conductors: 3.Wire gauge: 14 AWG.Input current: 15 A.Input voltage: 125 VAC.Supports computer, network switch, PDU, router, server.Weight: 17.3 oz..Comes with lifetime warranty.The StarTech 10' NEMA 5-15P to C19 computer power cord in black, helps to make high-power connections for routers, switches and power distribution units.

Get the Tripp Lite P034-010 power cable to provide secure and reliable power supply to your electronic devices. This power cable sports a IEC60320C19 male connector at one end and a NEMA 5-15P female at the opposite end for efficient charging..C19 male and NEMA 5-15P female for efficient charging.10' black power cable for easy installation.Comes with a lifetime limited warranty.The 10' black Tripp Lite P034-010 IEC-320-C19 to NEMA 5-15P Heavy Duty Power Cord with a rating of 125 V is suitable for charging all devices.

The Tripp Lite 10' 12AWG heavy-duty power extension cord features IEC-320-C19 connector on one end and NEMA 5-20P connector on the other end for enhanced connectivity..Heavy-duty power extension cord is perfect power connection solution for larger servers, PCs, monitors, laser printers or other peripherals.Cable length: 10'.Connections: NEMA 5-20P connector on first end, IEC-320-C19 connector on second end.Three 12 AWG copper conductors for better conductivity.UL Approved and RoHS compliant.Comes in black color.Constructed with fully molded ends and has 125 V/20 A rating.Comes with lifetime limited warranty

The Eaton 9PX3000GRT 10-outlets online UPS, is the perfect solution for rack and stand-alone installations in harsh electrical and critical applications. It delivers an output voltage of 3000 VA and power of 3000 W. The double conversion UPS full load runtime with 6' power cord. It includes tower stand, rack mounting kit and intelligent power protector software..3000 VA/3000 W double-conversion UPS.Receptacles: 8 x power IEC 320 EN 60320 C13, 2 x power IEC 320 EN 60320 C19.Dimensions: 3.4"H x 17.3"W x 23.8"D, cord length: 6'.Input voltage: 176 - 276/100 - 276 V, runtime: 4 min (full load).Meets CISPR 22 Class B, ANSI C62.41, NOM, IEC 62040-2 class B, RoHS, cULus, VCCI Class B, FCC Part 15 standards.2U rack mountable/external, sealed lead-acid battery.Advance battery management (ABM), LCD display, LED indicators.Cold-start function, automatic self-test, remote emergency power Off (REPO).Includes tower stand, rack mounting kit, intelligent power protector software.1 x serial cable - external, 1 x USB cable - external, 2 x power connector adapter.Remote management interface: RS-232, USB

SCHNEIDER ELECTRIC IT USA™ 0U Rack PDU offers an ability to analyze the component power trends and performs capacity planning. Includes load indicator LED for quick indicating of overload and warning conditions. Effortlessly distributes the critical alerts, surveillance video/key information. With an input current of 30 A this PDU provides an output voltage of 200/208 V at a frequency of 50/60Hz. Network and visual alarms helps to inform the user with possible problems. Provides overload protection and has 21 IEC 320 C13, 3 IEC 320 C19 output connections..Power distribution unit distributes power from NEMA L6-30 to 21 x power IEC 320 EN 60320 C13, 3 x power IEC 320 EN 60320 C19 connectors.Measures 4 1/2" x 80 1/4" x 6 1/2".Comes in black color for attractive look.Requires an input voltage of 200 - 240 V at 24 A for better operation.Operates at a frequency of 50/60 Hz.IEC-320 c13 IEC-320 c13/ IEC-320 C19 output connector to effectively distribute power.Single power cord with maximum line current of 30 A for high performance.Delivers output voltage of 200 - 208 V for better performance.Offers granular view of power distributed to equipment and analyze component power trends as well as capacity planning.Network management capabilities allow users to access, configure, manage rack PDUs from remote locations to save valuable time.Alarm thresholds avoid overloaded circuits and inform the user of possible problems.Operates at -5 - 45 deg C temperature for superior operation.Comes with 2 years of repair or replace warranty.SCHNEIDER ELECTRIC IT USA™ 0U Rack PDU with 200/208 V output voltage and 30 A input current offers high-performance. Easily distributes power from NEMA L5-30P plugs.

5/58kW 208/240V 30A switched PDU.24 switched outlets-20 C13, 4 C19.Ethernet network interface for remote outlet access 24/7.Digital meter for load monitoring in real time.Monitors power consumption of individual outlets

The Eaton ® EMI310-10 G3 monitored ePDU facilitates billing grade accuracy monitoring of input and branch circuits on a local LCD pixel display or over a network connection. The high accuracy meter of this ePDU, is perfect for measuring current, voltage, power and energy for load balancing, capacity planning, efficiency monitoring and energy usage reporting. It is great for IT and data center applications. This ePDU incorporates daisy chain that allows four ePDUs to share the same network connection and IP address. It can operate in high operating temperature environments up to 140 deg F. This ePDU has a input voltage rating of 120/208 V and power rating of 8.64 kVA..Enclosure power distribution unit offers reliable and cost effective power distribution.Dimensions: 66.5"(H) x 2.1"(W) x 2.1"(D).Receptacles: NEMA L21-30P input, 30 x IEC 60320 C13, six IEC 60320 C19, one NEMA 5-20R output, 10/100 Ethernet interface, Serial interface: RS232.Voltage: 120/208 VAC input at 50/60 Hz, Input current: 24 A, Circuit breakers: (3) 20 A.Output capacity: 8.64 kW.Input cord length: 10'.Form factor: Vertical (0U).Has high accuracy meter that measures current, voltage, power and energy for load balancing, capacity planning & energy usage reporting.High operating temperature (140 deg F/60 deg C) for containment or hot network closet environments.Perfect for IT and data center applications.Allows +/- 1 percent billing grade accuracy for high accuracy reporting of energy usage.Advanced LCD pixel display is perfect to display current, voltage, power and menu setup of parameters including IP address or display rotation.Hot-swap meter offers easy serviceability without removing power to the rack.Meets UL ITE 60950-1 and FCC standards or certifications

The PDUMV30HVNETLX 5/5.8kW Single-Phase Switched PDU provides advanced network control and remote power monitoring with the ability to turn on, turn off, reboot or lock out power to each outlet. Recommended for any IT or industrial application, it features 24 switched outlets (20 C13 and 4 C19). LEDs indicate each outlet's on/off power status. A 10-foot cord with NEMA L6-30P plug connects the PDU to a compatible AC power source, generator or protected UPS. The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. A digital ammeter allows you to monitor each bank's load in real time to ensure it remains well below maximum capacity with no danger of overload. The PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access..5/5.8kW 208/240V 30A switched PDU.24 individually controllable outlets-20 C13, 4 C19.Built-in LX Platform interface for remote access.Digital ammeter for on-site load monitoring in real time.NEMA L6-30P input with 10 ft. AC power cord

The APC® AP6002A basic rack power distribution unit with 16-outlet has a voltage rating of 200-240 V AC..Basic rack power distribution unit offers a range of basic and metered PDUs for any application.Dimensions: 32.81"H x 2.19"W x 1.85"D.Input connection: NEMA L6-30P cord, output connections: (14) IEC 60320 C13 and (2) IEC 60320 C19.Maximum input current (phase): 30 A (24 A UL/C-UL derated), input frequency: 50/60 Hz.Maximum output current: C19, 16 A, C13, 12 A (UL/CUL derated) C19, 20 A, C13, 15 A (PSE) (outlet), 30 A (24 A UL/C-UL derated) (phase).Acceptable input voltage: 200-240 VAC +6% to -10%, output voltage: 200-240 VAC +6% to -10%.Overcurrent protection (internal): (2) 20 A, 2-pole breakers.Distributes power to devices in the rack.Cord length: 10'.Maximum elevation (above MSL): Operating: 0 to 3048 m.Temperature: Operating: 0 to 50 deg C, storage: -15 to 60 deg C, humidity: Operating/storage: 5 to 95%, non-condensing.Includes NEMA L6-30P cord.Meets Safety approvals: UL/C-UL, ROHS: 2011/65/EU-latest revision standards.Weight: 8.49 lbs.

The Tripp Lite P047-002 2' heavy-duty power extension cord has IEC-320-C14 connector on one end and IEC-320-C19 connector on other end. This cord is made of three 14 AWG copper conductors and has fully molded ends..Molded, heavy-duty power extension cord is perfect for larger servers and other high-output networking equipment.Cord length: 2'.Three prong guards against shock.Comes in black color and SJT jacket prolongs cable life.14/3 AWG conductor constructions ensures superior electrical conductivity.Amperage: 15 A, Voltage rating: 100 - 250 V.Connector on first end: one IEC 320 EN 60320 C19 female.Connector on second end: one IEC 320 EN 60320 C14 male.Compatible with PC.Fully molded ends for added safety.RoHS Compliant.Comes with lifetime limited warranty

APC® Power distribution unit has a input voltage rating of 200/208/230 VAC and output voltage rating of 200/208/230V. Power distribution unit offers active metering and includes a temperature/humidity sensor port..IEC-320 C20 20A 200V, 208V, 230V input.50/60 Hz frequency.Outlet connector: 18 x IEC 320 C13, 2 x IEC 320 C19.Black.Output voltage: 200 V, 208 V, 230 V.Maximum total output current draw per phase: 16 A, Maximum line current per phase: 20 A.Dimensions: 902 mm(H) x 56 mm(W) x 44 mm(D).Operating environment/ relative humidity/ elevation: -5 - 45 deg C/ 5 - 95%/ 0 - 3000 m, storage temperature/ relative humidity/ elevation: -25 - 65 deg C/ 5 - 95%/ 0 - 15000 m.Protocols: SNMP, telnet.Remote management capabilities, local current monitoring display, alarm thresholds, load indicator LED.Integrates with infrastruxure central, flash upgradeable, wide range of input and output connections.Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers.Certifications and standards: CSA C22.2 No. 60950, IEC 60950, METI denan, UL 60950-1, VDE, RoHS, REACH(contains no SVHCs), battery directive.Weight: 6.46 lbs..Warranty: 2 years repair or replace.Metered rack 2G 208/230V 20/16A power distribution unit provide power utilization data to allow data center managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership.

Tripp Lite Single phase basic power distribution unit has NEMA L6-30P enclosure to offer added protection and can be 1U/0U vertical rack mounted. Unit has NEMA 5-15R outlet connector and offers 15 A overload protection..Single phase NEMA L6-30P 15' 30 A 208 - 240 V input.208 - 240 V 50/60 Hz output.Outlet connector: 16 IEC-C13, 4 IEC-C19.Overload protection: 30 A.1U/0U vertical rack mount.Package includes: PDU1230 power strip, warranty information, instruction manual.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Back panel nut and bolt grounding lug.Reversible housing; 5.2'' depth.Typical applications: Internetworking, PC systems, telecommunications, audio/video, security, sound reinforcement and more. Ideal for distribution of UPS, generator or commercially derived AC power to protected equipment.Certifications: Tested to UL60950-1 (USA), CSA-C22.2 (canada).Dimensions: 1.75"(H) x 17.50"(W) x 5.20"(D).limited lifetime mfr. warranty.Tripp Lite Sigle Phase Basic Power Distribution Unit offers reliable rackmount power distribution. It supplies equipment with continuous power from any protected UPS, generator or mains input power source.

Tripp Lite Single phase basic power distribution unit can be 1U/0U vertical rack mounted. Unit has adjustable mounting brackets to offer easy installation..Single phase IEC-320 C20 16 A 100 - 240 V input.Input voltage: 100 - 240 V, frequency required: 50/60 Hz output.Outlet connector: 12 IEC C13, 2 IEC-C19.Overload protection: 16 A.1U/0U vertical rack mount.Package includes: PDU12IEC rackmount power strip, warranty information, instruction manual.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Back panel grounding lug.Reversible housing; 4 1/4" depth.Typical applications: Internetworking, PC systems, telecommunications, audio/video, security, sound reinforcement and more. Ideal for distribution of UPS, generator or commercially derived AC power to protected equipment.Weight: 3.2 lbs..Dimensions: 1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).limited lifetime mfr. warranty.Tripp Lite Sigle Phase Basic Power Distribution Unit offers reliable rackmount power distribution. It supplies equipment with continuous power from any protected UPS, generator or mains input power source.

Optimize energy usage with this power distribution unit. A load indicator LED helps protect against overloading circuits by issuing warnings based on alarm parameters you can customize as needed. With a rack-mountable design, this unit can be secured horizontally or vertically, providing easy access to equipment. Featuring a compact design, this power distributor is easy to tuck out of the way for a tidy appearance. The branch whip lets multiple devices receive power at the same time. This APC metered rack power distribution unit is flash upgradeable, letting it download changes and improvements from the network and keeping it up to date for optimal performance..Metered rack PDU provides active metering to enable energy optimization and circuit protection.208V three-phase power, input frequency: 50/60Hz; maximum total current draw per phase: 48A.Dimensions: 72"H x 2.2"W x 2"D, weight: 20.9 lbs..Input connection: 4-pin IEC-309 connector, maximum input current is up to 48A UL.Output connections: 6 IEC-320-C13 and 12 IEC-320-C19 outlets.USB port allows for firmware upgrades, CAN ports enable data transfer for future expansion options.Provide real-time remote monitoring of connected loads, user-defined alarms warn of potential circuit overloads before critical IT failures occur.Features real power monitoring, temperature/humidity sensor port, locking IEC receptacles, and ultra-low-profile circuit breakers.2-year manufacturer limited warranty.Provide circuit protection with this APC metered rack-mountable power distribution unit.

The Tripp Lite PDUV30HV 5/5.8 kW single-phase basic PDU supports 30 A maximum capacity at 208/240 V. It features 10' attached line cord with L6-30P input plug and 32 C13 as well as six C19 outlets that support up to 38 directly connected pieces of networking equipment. Switch-free unfiltered electrical pass-through of this PDU, distributes UPS or generator power to critical networking equipment. This PDU has circuit breaker to protect from overloads and short circuit fault conditions. It comes with mounting brackets for vertical installation in standard 2 and 4 post racks or other surfaces..Single phase NEMA L6-30P 10 ft 30 A 208/240 V input.208/240 V 50/60 Hz output.6 IEC-C19, 32 IEC-C13 outlet connector.Outlets are arranged in two separately breakered load banks each with 15 A overload protection.0U vertical rack mount.Package includes PDUV30HV 63.75 inch basic PDU with owner's manual, set of 2 plug retention brackets and installation hardware, set of mounting brackets and installation hardware.Maximum input amps (A) details: Agency de-rated to 24A.Sleeved circuit breaker assembly prevents accidental shutoff and requires no tools to reset if tripped.Switch-free unfiltered electrical pass-through reliably distributes UPS or generator power to critical networking equipment.Included cord retention brackets keep vital network equipment plugged in and continuously powered.Toolless mounting supported in button-mount compatible racks.Included nut and bolt mounting brackets support installation in non button-mount compatible racks and other flat surfaces.Vertical rack mount, wall mount, raceway, workbench style.Form factors supported: 0u vertical installation in equipment racks, plus under-counter and wall mount.Typical applications: Ideal for network configurations where a basic non-metered, unswitched PDU is required to distribute UPS or generator power to multiple pieces of networking equipment.Certifications: Tested to UL60950-1 (USA, Canada), NOM (Mexico).8 lbs.63 3/4"(H) x 2 1/4"(W) x 3 3/4"(D).Lifetime limited warranty.TRIPP LITE IEC-C13/IEC-C19 32/6 Outlet 30 A 208 - 240 V Basic Power Distribution Unit offers real-time local reporting of load level in amps via built-in digital display.

APC® Basic power distribution unit featuring rack mounting brackets can be 1U horizontal rack mounted and offers overload protection up to 24 A. Unit has input voltage rating of 200 - 230 V and input current rating of 16 A..IEC-320 C20 8.2' 16 A 200 - 230 V input.120 - 230 V 50/60 Hz output.Outlet connector: 10 IEC 320 C13, 2 IEC 320 C19.1U horizontal rack mount.Includes: Rack mounting brackets, user manual.Puts power where it is needed most-in the racks near the equipment.0 - 95% operating relative humidity.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Certifications: CE, GOST, VDE, Victoria, RoHS complaint.Weight: 9 lbs..Dimensions: 1 3/4"(H) x 17.60"(W) x 2 1/4"(D).2 years limited Mrf. warranty.APC® AP9559 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.

The Eaton G3 EMA107-10 single-phase managed ePDU facilitates billing grade accuracy monitoring of input and branch circuits on a local LCD pixel display or over a network connection. The high accuracy meter of this ePDU, is perfect for measuring current, voltage, power and energy for load balancing. It also measures capacity planning, efficiency monitoring and energy usage reporting. This ePDU uses a daisy chain that allows four ePDUs to share the same network connection and IP address. It can operate in high operating temperature environments up to 140 degrees F, and has an input and output voltage rating of 230 VAC and power rating of 5.76 kVA..Enclosure power distribution unit offers reliable and cost effective power distribution.Dimensions: 66.5"(H) x 2.1"(W) x 2.1"(D).Receptacles: one NEMA L6-30P input, 20 x IEC 60320 C13 and four IEC 60320 C19 output.Voltage: 230 VAC input/output at 50/60 Hz, Input current: 24 A, Circuit breakers: (2) 20 A.Output capacity: 5.76 kW.Input cord length: 10'.Form factor: Vertical (0U).Has high accuracy meter that measures current, voltage, power and energy for load balancing, capacity planning & energy usage reporting.High operating temperature (140 deg F/60 deg C) for containment or hot network closet environments.Outlet switching allows for on/off/reboot of individual outlets reducing the cost of managing remote or local IT data center environments.IEC outlet grip plug retention secures plugs in place using standard cables.Has outlet switching for on, off and reboot control to minimize management costs and outlet level metering to +/- 1 percent billing grade accuracy.Daisy chain of IP addresses enables four devices to share one network connection to minimize up to 75 percent network installation costs.cUL Certified

Tripp Lite™ Power distribution unit is made of sheet metal for durability and has a input/output voltage rating of 100 - 240 V. Power distribution unit is rack mountable and supplies equipment with continuous power from any protected UPS..Single phase NEMA L6-20P, IEC-320 C20 3.7m 20A 100, 120, 127, 200, 208, 230, 240 VAC input.50/60 Hz frequency.Outlet connector: 12 x IEC-C13, 2 x IEC-C19.Black.Cord length: 12'.Output voltage: 100 - 240 V.Material of construction: Sheet metal.Maximum input current: 20A, PDU input voltage 100, 120, 127, 200, 208, 230, 240V, Voltage compatibility: 100, 120, 127, 200, 208, 230, 240 VAC.Dimensions: 1.75"(H) x 17.25"(W) x 3.75"(D).Outlets center to center measurement: Distance between front (C13) outlets = 28.75mm, Distance between rear (C19) outlets = 55mm, Distance between rear (C13) outlets = 28.75mm, TVSS grounding: Rear grounding lug.Style: Rackmount, vertical rackmount, wallmount/under counter, Form factors supported: 1U rackmount, 0U vertical rackmount, wall-mount, and under-counter installation.Ideal for datacenters, network closets, equipment racks and a wide variety of other application types, high quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Supplies equipment with continuous power from any protected UPS, generator or mains input power source.Package contents: PDUH20DV PDU rackmount PDU, owner's manual.Certifications and standards: Tested to UL 60950 (USA), CSA (Canada), CE (EU), RoHS compliant.Weight: 3.75 lbs..Warranty: 5 years limited.Tripp Lite Power Distribution Unit - Equal Power Distribution

TRIPP LITE IEC-C13/IEC-C19 12/2 Outlet 16 A 100 - 240 V Basic Power Distribution Unit offers reliable Rackmount power distribution. It supplies equipment with continuous power from any protected UPS, generator or mains input power source. High quality design includes rugged all-metal housing and secure Rackmount installation with included mounting accessories..Single phase NEMA 5-15/20P / NEMA L5-20P / NEMA L6-20P / IEC-320 C14/C20 10 ft 16 A 100 - 240 V input.100 - 240 V 50/60 Hz output.12 IEC-C13, 2 IEC-C19 outlet connector.16 A overload protection.1U horizontal rack mount.Package includes 1U rack mount PDU, 1U rack mount PDU, Set of 5 plug adapters, user manual with warranty information.Back panel grounding lug.14 outlets (4 C13 front-facing/2 C19 and 8 C13 rear-facing).Rack mount, vertical rack mount, wall mount/under-counter style.Form factors supported: 1U rack mount, 0U vertical mount, wall mount and under-counter mounting supported.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Typical applications: Ideal for network power distribution in datacenters, computer rooms and network closets.Pack of 5 included C19 adapters with locking retainer clip enables plug conversion to C14 (connects to C13 100-240V), L6-20P (connects to L6-20R 20A 208/240V), L5-20P (connects to L5-20R 20A 120V), 5-20P (connects to 5-20R 20A 120V) and 5-15P (connects to.Outlets center to center measurement: Distance between front (C13) outlets = 28.75mm, distance between rear (C19) outlets = 55mm, distance between rear (C13) outlets = 28.75mm.Certifications: Tested to UL60950-1 (USA), CSA (Canada), CE (EU).3.2 lbs.1 3/4"(H) x 17 1/2"(W) x 4 1/4"(D).Lifetime limited warranty.Space saving, ultra-compact housing with support for wall-mount, desktop or floor placement; built-in grounding lug.6' power cord; USB cable included.TRIPP LITE IEC-C13/IEC-C19 12/2 Outlet 16 A 100 - 240 V Basic Power Distribution Unit offers real-time local reporting of load level in amps via built-in digital display.

The Tripp Lite PDUMH30HV metered power distribution unit in black, comes with 18-outlet and it has a voltage rating of 208/240 V..Power distribution unit offers a range of basic and metered PDUs for any application.Dimensions: 3 1/2"H x 17 1/2"W x 12 1/2"D.Comes in black color.Input receptacles: NEMA L6-30P, output receptacles: 2 x IEC 60320 C19, 16 x IEC 60320 C13.Input current: 30 A.Input voltage: 208 VAC, 240 VAC, output voltage: 208 VAC, 240 VAC.Power rating: 5.8 kVA, protection type: Overload protection.Form factor: Horizontal rackmount.Rack height: 2U.Cord length: 12'.Includes PDU, mounting brackets, plug retention plates, user manual.Meets TAA, Green, RoHS standards

The PDUMNV30HV2LX 5.8kW Single-Phase Monitored PDU provides real-time remote monitoring of voltage, frequency and load levels via built-in network connection. By reducing the frequency of on-site visits, these advanced remote capabilities can save you money and reduce downtime. The 0U PDU features 42 outlets (36 C13 and 6 C19) with included plug-lock insert sleeves to prevent cables from becoming accidentally disconnected. A 10-foot cord with NEMA L6-30P plug connects the PDU to a compatible AC power source, generator or protected UPS. The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. A digital ammeter allows you to monitor each load bank's current and the total connected PDU load in real time to ensure they remain well below maximum capacity with no danger of overload. The PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access..42 outlets-36 C13, 6 C19-with plug-lock insert sleeves.Built-in Java-free LX Platform interface for remote access 24/7.Digital ammeter for on-site load monitoring in real time.NEMA L6-30P input with 10 ft. AC power cord

Tripp Lite Metered PDUMH20HV 10-Outlets PDU.Input voltage: 200 VAC, 208 VAC, 230 VAC, 240 VAC.Output voltage: 208 VAC, 230 VAC, 240 VAC.Built-in 2 digit visual meter continuously reports PDU load level in amps.PDU type: Basic.Frequency: 50/60 Hz.Input receptacles: IEC 60320 C20, NEMA L6-20P.Output receptacles: 2 x IEC 60320 C19, 8 x IEC 60320 C13.Form factor: Horizontal rackmount 1U.Dimensions: 1.8"(H) x 17 1/2"(W) x 6 1/2"(D).Overload protection: Outlets are arranged in a single unbreakered load bank.Protection type: Overload protection.Includes: Metered PDUMH20HV 10-outlets PDU, rackmount brackets, cord retention brackets.Certifications: Tested to UL 60950-1 (USA, Canada), class A (Emissions), NOM (Mexico), ), CE (IEC 60950), (RoHS compliant).Weight: 6.8 lbs..Warranty: Lifetime limited.Meets UL 60950-1 (USA, Canada), Class A (Emissions), NOM (Mexico), CE (IEC 60950), RoHS, TAA standards or certifications.Weight: 3.1 kg.Comes with 2 years limited warranty.Tripp Lite PDU has a visual current meter which tracks the output current of all outlets and features rackmount brackets.

APC® Rack metered power distribution unit 2G includes real power monitoring a temperature/humidity sensor port and locking IEC receptacles. 10 kVA PDU can be accessed or configure through secure Web, SNMP or Telnet interfaces..CS8365 35 A 208 VAC.50/60 Hz frequency.Outlet connector: 36 x IEC 60320 C13, 6 x IEC 60320 C19.Power rating: 10 kVA.Cord length: 1.83 m, Number of cord/cable: 1.Output voltage: 208 VAC.Form factor: Rack mountable.Dimensions: 72"(H) x 2.2"(W) x 2"(D).Protection type: Overload protection, Management: SNMP, Telnet, Web.Temperature: 32 to 122 deg F(operating), Operating humidity: 5 - 95%.Features current meter.Provide power utilization data to allow data center managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership.Include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra-low profile circuit breaker.Includes Rack PDU 2G, metered, zeroU, 10.0 kW, 208 V, (36) C13 and (6) C19, installation guide, rack mounting brackets, safety guide, serial configuration cable.Certifications and standards: cUL, EN 55022 Class A, EN 55024, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Class A, ICES-003, UL, VCCI Class A, RoHS, REACH, Green compliant.Weight: 18.78 lbs..Warranty: 2 years limited.APC® Rack metered power distribution unit 2G features remote alerts to warn of potential circuit overloads and provide power utilization data to allow data center managers to make informed.

The APC® Smart-UPS™ SMX2200HV 2200 VA line interactive UPS offers full load backup/run time of 10 min, half load backup/run time of 25 mins and maximum battery recharge time of 3 hrs. It measures 17" x 7" x 19". The sealed lead acid UPS has eight IEC 320 C13 plugs, two IEC 320 C19 plugs, two IEC jumpers plugs, SmartSlot, USB port and serial port for connectivity. The control panel has LED display with on battery, replace battery and overload indicators, multi-function LCD status as well as control console. It withstands an operating temperature range of 0 to 40 deg C. The UPS has alarm for on battery, low battery and configurable delay..Load capacity: 2200 VA, 1980 W.Dimensions: 17"H x 7"W x 19"D.Backup/run time (full load): 10 min, Backup/run time (half load): 25 min, Maximum battery recharge time: 3 hrs.Output voltage: 220 VAC, 208 V, 230 V (nominal).Control panel: LED status display with on line, on battery, replace battery and overload indicators, multi-function LCD status and control console.Form factor: 4U tower/rack mountable.Battery chemistry: Sealed Lead Acid, Replacement battery: APCRBC143, Battery capacity: 702 VAh.Interface: SmartSlot, USB, serial port, Number of expansion slots: 1, Receptacles: Eight IEC 320 C13, two IEC 320 C19, two IEC jumpers.Safety Features (lightning protection).Input connections: IEC-320 C20, Cord length: 6.56'.Color: Black, Battery characteristics: Spill-proof, maintenance-free with suspended electrolyte, leak-proof, Emergency power off.Nominal input voltage: 208 V, 230 V, Output frequency (sync to mains): 50/60 Hz +/- 3 Hz, Input frequency: 50/60 Hz +/- 3 Hz (auto sensing).Waveform type: Sine wave, Surge energy rating: 645 J.Alarm: On battery, low battery, configurable delay.Temperature: 0 - 40 deg C, Storage Temperature: -15 to 45 deg C, Relative humidity: 0 - 95% (operating/storage), Thermal dissipation: 150 BTU/hr.Meets RoHS, REACH, CE, CSA, EAC, EN 50091-1, EN 50091-2, EN/IEC 62040-1, EN/IEC 62040-2, FCC Part 15 Class A, IEC 60950 certifications and standards.Weight: 85 lbs..Comes with 3 years (without battery) and 2 years (with battery) warranty.SCHNEIDER ELECTRIC IT USA™ Rack/tower LCD smart-UPS with power delivering capacity of 2200 VA offers high-performance. Secures electronic equipment from power blackouts/surges.

The APC® Smart-UPS™ SRT3000RMXLW-IEC 3000 VA 208/230 V dual conversion online UPS offers full load backup/run time of 4 mins and maximum battery recharge time of 3 hrs. It measures 3.3" x 17" x 25". The lead acid battery UPS has two IEC 320 C19 plugs, six IEC 320 C13 plugs, two IEC jumpers plugs, RJ-45 serial port, SmartSlot and USB port for connectivity. The control panel has multi-function LCD status and control console. This hot-swappable UPS features automatic/manual internal bypass and audible as well as visible alarms that come prioritized by severity. It withstands an operating temperature rating of 0 to 40 deg C..Dual conversion online UPS for power protection.Load capacity: 3000 VA, 2700 W.Dimensions: 3.3"H x 17"W x 25"D.Backup/run time (full load): 4 min, Maximum battery recharge time: 3 hrs..Output voltage: 208 V, 230 V (nominal).Control panel: Multi-function LCD status and control console.Form factor: 2U rack mountable, hot-swappable batteries.Battery chemistry: Sealed Lead Acid, Replacement battery: APCRBC152, Battery capacity: 505 VAh.Interface: RJ-45 serial, Smart-slot, USB, Receptacles: Two IEC 320 C19, six IEC 320 C13, two IEC jumpers.Input connections: IEC-320 C20, Cord length: 8'.Color: Black, Battery characteristics: Maintenance-free with suspended electrolyte, leak-proof, Emergency power off, Expected battery life: 3 -5 years.Nominal input voltage: 208 V, 230 V, Output frequency (sync to mains): 50/60 Hz +/- 3 Hz, Input frequency: 40 - 70 Hz (auto sensing).Waveform type: Sine wave, Surge energy rating: 340 J.Internal bypass (automatic and manual), Audible alarm: Audible and visible alarms prioritized by severity.Temperature: 0 - 40 deg C, Storage Temperature: -15 to 45 deg C, Relative humidity: 0 - 95% (operating/storage), Protection class: IP 20.Meets CE, CE Mark, CSA C22.2 No.107.3-05, EAC, EN/IEC 62040-1, EN/IEC 62040-2, Energy Star (USA), FCC Part 15 Class A certifications and standards.Weight: 69 lbs..Comes with 3 years (without battery) and 2 years (with battery) warranty

The ATS will maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails, the ATS will switch over to the secondary power source until primary input is restored and stable..Single phase IEC-320 C20 12' 20 A 200 - 240 V input.200 - 240 V 50/60 Hz output.Outlet connector: 8 IEC-C13, 2 IEC-C19.1U horizontal rack mount.Package includes: switch, metered PDU with ATS support, set of 2 C19 to C20 12'/ 3.7 m power cables, user manual with warranty information.2 digit display reports power consumption in amps.ATS circuits normally maintain output sourced from the primary input cable, as primary input power fails, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and stable.2 - 7 ms transfer time.Switched outlets and ethernet interface supports individual outlet control on a real-time or programmable basis and user-specified alarm notification thresholds for all reported site power conditions.DHCP/Manual configuration support.Supports HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols.Outlets are factory programmed for sequential turn-on at 250 ms intervals when the PDU is first energized.LEDs confirm power availability on both input lines and for each output receptacle.Typical applications: Ideal for configurations requiring a simple PDU that displays power consumption in amps.Certifications: Tested to UL 60950 (USA, canada), CE (europe), class A (emissions), NOM (mexico), RoHS complaint.Weight: 10.3 lbs..Dimensions: 1.72"(H) x 17.3"(W) x 14.8"(D).2 years limited Mrf. warranty.Tripp Lite Sigle Phase Switched Power Distribution unit provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources.

Tripp Lite PDUMV30HV Single phase metered power distribution unit is perfect to power networking equipment in datacenters, computer rooms and network closets. Comes with mounting brackets and installation hardware for user convenience. Has 30 outlets in two separately breakered load banks with separate 15 A breaker and current metering. Includes 10' cord for easy connectivity..Single phase NEMA L6-30P 10 ft 30 A 208/240 V input.208/240 V 50/60 Hz output.6 IEC-C19, 24 IEC-C13 outlet connector.Outlets are arranged in two separately breakered load banks each with 15 A overload protection.0U vertical rack mount.Package includes PDUMV30HV 63.75 in basic PDU with owner's manual, set of 2 bolt-on plug retention brackets and installation hardware, set of mounting brackets and installation hardware.Toolless installation in button-mount compatible equipment racks.Set of two lighted meters report PDU output current in amps for each output load bank.Bolt-down installation brackets support installation in other racks and additional surfaces.Vertical rack mount, wall mount, raceway, workbench style.Typical applications: Ideal means of powering networking equipment in datacenters, computer rooms and network closets.Form factors supported: 0u vertical installation in equipment racks, plus under-counter and wall mount.Includes 2 built-in 2-character LED meters to display power consumption of items plugged into each separately breakered 15A loading bank indicator.Certifications: Tested to UL60950-1 (USA, Canada), NOM (Mexico).8 lbs.63 3/4"(H) x 2 1/4"(W) x 3 3/4"(D).Lifetime limited warranty.T+AK804ripp Lite 208/240 V Single phase metered power distribution unit has 30 outlets in two separately breakered load banks. Has durable construction and offers superior performance.

The Tripp Lite PDUMV30HV2 5.8 kW single-phase metered PDU has 48 outlets for distributing single-phase AC power to rack-mounted equipment. The ammeters in this PDU, allows you visually monitor each bank and maintain balanced loads to prevent circuit overloads due to breakers tripping. It has special guards to prevent the breakers from tripping accidentally. This PDU comes with NEMA L6-30P input plug with 10' cord to connect to your AC power source, generator or protected UPS..Power distribution unit offers reliable and cost effective power distribution.Dimensions: 70"(H) x 2.2"(W) x 2.5"(D).Metal construction for long lasting durability.Receptacles: NEMA L6-30P input, eight IEC 60320 C19 and 40 x IEC 60320 C13 output.Voltage: 208/240 VAC at 50/60 Hz input/output, Input current: 30 A.Output capacity: 5.8 kW.Input cord length: 10'.Form factor: Vertical (0U).Offers overload protection.Operating temperature: 32 - 122 deg F (0 - 50 deg C), Storage temperature: 5 - 140 deg F (-15 - 60 deg C).Comes with outlets arrangement in two separate load banks, each with 24 outlets.Ammeters allow you visually monitor each bank and maintain balanced loads to avoid circuit overloads and downtime due to breakers tripping.Special guards aid to prevent the breakers from tripping accidentally while outlets, breakers come color-coded and labeled for easy identification.Contains plug-lock inserts (8 C20, 40 C13), spare installation buttons, 2.9 mm/4.6 mm, ground screw, mounting hardware and owner's manual.Meets UL/CAN 60950-1 (USA, Canada), NOM (Mexico), FCC Class A (Emissions), ROHS, TAA standards or certifications.Weight: 12.35 lbs..Comes with 2 years limited warranty